Advances in Cell-Rich Inks for Biofabricating Living Architectures

Advancing biofabrication towards manufacturing living constructs with well-defined architectures and increasingly biologically relevant cell densities is highly desired to mimic the biofunctionality of native human tissues. The formulation of tissue-like, cell-dense inks for biofabrication remains, however, challenging at various levels of the bioprinting process. Promising advances have been made towards this goal, and relatively high cell densities have been achieved, surpassing the limited cell densities of conventional platforms, pushing the current boundaries a step closer to achieving tissue-like cell densities. On this focus, herein we discuss the overarching challenges in the bioprocessing of cell-rich living inks into clinically-grade engineered tissues, as well as highlight the most recent advances in cell-rich living ink formulations and their processing technologies. Additionally, an overview of the foreseen developments in the field is provided and critically discussed. This article is protected by copyright. All rights reserved.

In-Bath 3D Printing of Anisotropic Shape-Memory Cryogels Functionalized with Bone-Bioactive Nanoparticles

Cryogels exhibit unique shape memory with full recovery and structural stability features after multiple injections. These constructs also possess enhanced cell permeability and nutrient diffusion when compared to typical bulk hydrogels. Volumetric processing of cryogels functionalized with nanosized units has potential to widen their biomedical applications, however this has remained challenging and relatively underexplored. In this study, we report a novel methodology that combines suspension 3D printing with directional freezing for the fabrication of nanocomposite cryogels with configurable anisotropy. When compared to conventional bulk or freeze-dried hydrogels, nanocomposite cryogel formulations exhibit excellent shape recovery (>95%) and higher pore connectivity. Suspension printing, assisted with a prechilled metal grid, was optimized to induce anisotropy. The addition of calcium- and phosphate-doped mesoporous silica nanoparticles into the cryogel matrix enhanced bioactivity toward orthopedic applications without hindering the printing process. Notably, the nanocomposite 3D printed cryogels exhibit injectable shape memory while also featuring a lamellar topography. The fabrication of these constructs was highly reproducible and exhibited potential for a cell-delivery injectable cryogel with no cytotoxicity to human-derived adipose stem cells. Hence, in this work, it was possible to combine a gravity defying 3D printed methodology with injectable and controlled anisotropic macroporous structures containing bioactive nanoparticles. This methodology ameliorates highly tunable injectable 3D printed anisotropic nanocomposite cryogels with a user-programmable degree of structural complexity.

Advances in screening hyperthermic nanomedicines in 3D tumor models

Hyperthermic nanomedicines are particularly relevant for tackling human cancer, providing a valuable alternative to conventional therapeutics. The early-stage preclinical performance evaluation of such anti-cancer treatments is conventionally performed in flat 2D cell cultures that do not mimic the volumetric heat transfer occurring in human tumors. Recently, improvements in bioengineered 3D in vitro models have unlocked the opportunity to recapitulate major tumor microenvironment hallmarks and generate highly informative readouts that can contribute to accelerating the discovery and validation of efficient hyperthermic treatments. Leveraging on this, herein we aim to showcase the potential of engineered physiomimetic 3D tumor models for evaluating the preclinical efficacy of hyperthermic nanomedicines, featuring the main advantages and design considerations under diverse testing scenarios. The most recent applications of 3D tumor models for screening photo- and/or magnetic nanomedicines will be discussed, either as standalone systems or in combinatorial approaches with other anti-cancer therapeutics. We envision that breakthroughs toward developing multi-functional 3D platforms for hyperthermia onset and follow-up will contribute to a more expedited discovery of top-performing hyperthermic therapies in a preclinical setting before their in vivo screening.

Embedded 3D Bioprinting for Engineering Miniaturized In Vitro Tumor Models

Embedded extrusion 3D bioprinting is a rapidly emerging additive manufacturing methodology that provides a precise spatial deposition of synthetic or natural-origin low-viscosity bioinks during the extrusion printing process. Such a strategy has to date unlocked the freeform extrusion biofabrication of complex micro-to-macro-scale living architectures for numerous applications, including tissue engineering and in vitro disease modeling. In this chapter, we describe a suspension bioprinting methodology leveraging a continuous viscoelastic biopolymer supporting bath functionalized with divalent calcium cations to enable a rapid processing of user-defined bioinks toward architecturally complex 3D in vitro tumor models. This highly simple and cost-effective viscoelastic supporting bath enables a full freeform biofabrication of cell-laden 3D tumor-mimetic architectures that exhibit structural stability in culture post-printing. The cytocompatibility of the supporting bath, its ease of removal from biofabricated living constructs, and its adaptability for processing different ECM-mimetic bioinks open avenues for multi-scale fabrication of numerous types of physiomimetic 3D tumor models for preclinical screening of candidate therapeutics.

Cell Surface Engineering Tools for Programming Living Assemblies

Breakthroughs in precision cell surface engineering tools are supporting the rapid development of programmable living assemblies with valuable features for tackling complex biological problems. Herein, the authors overview the most recent technological advances in chemically- and biologically-driven toolboxes for engineering mammalian cell surfaces and triggering their assembly into living architectures. A particular focus is given to surface engineering technologies for enabling biomimetic cell-cell social interactions and multicellular cell-sorting events. Further advancements in cell surface modification technologies may expand the currently available bioengineering toolset and unlock a new generation of personalized cell therapeutics with clinically relevant biofunctionalities. The combination of state-of-the-art cell surface modifications with advanced biofabrication technologies is envisioned to contribute toward generating living materials with increasing tissue/organ-mimetic bioactivities and therapeutic potential.

Novel Insights on the Role of Epigenetics in Androgen Receptor's Expression in Prostate Cancer

The androgens/androgen receptor (AR) axis is the main therapeutic target in prostate cancer (PCa). However, while initially responsive, a subset of tumors loses AR expression through mechanisms putatively associated with epigenetic modifications. In this study, we assessed the link between the presence of CpG methylation in the 5'UTR and promoter regions of AR and loss of AR expression. Hence, we characterized and compared the methylation signature at CpG resolution of these regulatory regions in vitro, both at basal levels and following treatment with 5-aza-2-deoxycytidine (DAC) alone, or in combination with Trichostatin A (TSA). Our results showed heterogeneity in the methylation signature of AR negative cell lines and pinpointed the proximal promoter region as the most consistently methylated site in DU-145. Furthermore, this region was extremely resistant to the demethylating effects of DAC and was only significantly demethylated upon concomitant treatment with TSA. Nevertheless, no AR re-expression was detected at the mRNA or protein level. Importantly, after treatment, there was a significant increase in repressive histone marks at AR region 1 in DU-145 cells. Altogether, our data indicate that AR region 1 genomic availability is crucial for AR expression and that the inhibition of histone methyltransferases might hold promise for AR re-expression.

Mammary Glands of Women, Female Dogs and Female Rats: Similarities and Differences to Be Considered in Breast Cancer Research

Breast cancer is one of the most common and well-known types of cancer among women worldwide and is the most frequent neoplasm in intact female dogs. Female dogs are considered attractive models or studying spontaneous breast cancer, whereas female rats are currently the most widely used animal models for breast cancer research in the laboratory context. Both female dogs and female rats have contributed to the advancement of scientific knowledge in this field, and, in a "One Health" approach, they have allowed broad understanding of specific biopathological pathways, influence of environmental factors and screening/discovery of candidate therapies. This review aims to clearly showcase the similarities and differences among woman, female dog and female rat concerning to anatomical, physiological and histological features of the mammary gland and breast/mammary cancer epidemiology, in order to better portray breast tumorigenesis, and to ensure appropriate conclusions and extrapolation of results among species. We also discuss the major aspects that stand out in these species. The mammary glands of female dogs and women share structural similarities, especially with respect to the lactiferous ducts and lymphatic drainage. In contrast, female rats have only one lactiferous duct per nipple. A comprehensive comparison between humans and dogs is given a special focus, as these species share several aspects in terms of breast/mammary cancer epidemiology, such as age of onset, hormonal etiology, risk factors, and the clinical course of the disease. Holistically, it is clear that each species has advantages and limitations that researchers must consider during the development of experimental designs and data analysis.

Brewer's Spent Yeast Cell Wall Polysaccharides as Vegan and Clean Label Additives for Mayonnaise Formulation

Brewer's spent yeast (BSY) mannoproteins have been reported to possess thickening and emulsifying properties. The commercial interest in yeast mannoproteins might be boosted considering the consolidation of their properties supported by structure/function relationships. This work aimed to attest the use of extracted BSY mannoproteins as a clean label and vegan source of ingredients for the replacement of food additives and protein from animal sources. To achieve this, structure/function relationships were performed by isolating polysaccharides with distinct structural features from BSY, either by using alkaline extraction (mild treatment) or subcritical water extraction (SWE) using microwave technology (hard treatment), and assessment of their emulsifying properties. Alkaline extractions solubilized mostly highly branched mannoproteins (N-linked type; 75%) and glycogen (25%), while SWE solubilized mannoproteins with short mannan chains (O-linked type; 55%) and (1→4)- and (β1→3)-linked glucans, 33 and 12%, respectively. Extracts with high protein content yielded the most stable emulsions obtained by hand shaking, while the extracts composed of short chain mannans and β-glucans yielded the best emulsions by using ultraturrax stirring. β-Glucans and O-linked mannoproteins were found to contribute to emulsion stability by preventing Ostwald ripening. When applied in mayonnaise model emulsions, BSY extracts presented higher stability and yet similar texture properties as the reference emulsifiers. When used in a mayonnaise formulation, the BSY extracts were also able to replace egg yolk and modified starch (E1422) at 1/3 of their concentration. This shows that BSY alkali soluble mannoproteins and subcritical water extracted β-glucans can be used as replacers of animal protein and additives in sauces.

Advances in bioengineering pancreatic tumor-stroma physiomimetic Biomodels

Pancreatic cancer exhibits a unique bioarchitecture and desmoplastic cancer-stoma interplay that governs disease progression, multi-resistance, and metastasis. Emulating the biological features and microenvironment heterogeneity of pancreatic cancer stroma in vitro is remarkably complex, yet highly desirable for advancing the discovery of innovative therapeutics. Diverse bioengineering approaches exploiting patient-derived organoids, cancer-on-a-chip platforms, and 3D bioprinted living constructs have been rapidly emerging in an endeavor to seamlessly recapitulate major tumor-stroma biodynamic interactions in a preclinical setting. Gathering on this, herein we showcase and discuss the most recent advances in bio-assembling pancreatic tumor-stroma models that mimic key disease hallmarks and its desmoplastic biosignature. A reverse engineering perspective of pancreatic tumor-stroma key elementary units is also provided and complemented by a detailed description of biodesign guidelines that are to be considered for improving 3D models physiomimetic features. This overview provides valuable examples and starting guidelines for researchers envisioning to engineer and characterize stroma-rich biomimetic tumor models. All in all, leveraging advanced bioengineering tools for capturing stromal heterogeneity and dynamics, opens new avenues toward generating more predictive and patient-personalized organotypic 3D in vitro platforms for screening transformative therapeutics targeting the tumor-stroma interplay.

Programmable Living Units for Emulating Pancreatic Tumor-Stroma Interplay

Bioengineering close-to-native in vitro models that emulate tumors bioarchitecture and microenvironment is highly appreciable for improving disease modeling toolboxes. Herein, pancreatic cancer living units-so termed cancer-on-a-bead models-are generated. Such user-programmable in vitro platforms exhibit biomimetic multicompartmentalization and tunable integration of cancer associated stromal elements. These stratified units can be rapidly assembled in-air, exhibit reproducible morphological features, tunable size, and recapitulate spatially resolved tumor-stroma extracellular matrix (ECM) niches. Compartmentalization of pancreatic cancer and stromal cells in well-defined ECM microenvironments stimulates the secretion of key biomolecular effectors including transforming growth factor β and Interleukin 1-β, closely emulating the signatures of human pancreatic tumors. Cancer-on-a-bead models also display increased drug resistance to chemotherapeutics when compared to their reductionistic counterparts, reinforcing the importance to differentially model ECM components inclusion and their spatial stratification as observed in vivo. Beyond providing a universal technology that enables spatial modularity in tumor-stroma elements bioengineering, a scalable, in-air fabrication of ECM-tunable 3D platforms that can be leveraged for recapitulating differential matrix composition occurring in other human neoplasias is provided here.

3D-bioprinted cancer-on-a-chip: level-up organotypic in vitro models

Combinatorial conjugation of organ-on-a-chip platforms with additive manufacturing technologies is rapidly emerging as a disruptive approach for upgrading cancer-on-a-chip systems towards anatomic-sized dynamic in vitro models. This valuable technological synergy has potential for giving rise to truly physiomimetic 3D models that better emulate tumor microenvironment elements, bioarchitecture, and response to multidimensional flow dynamics. Herein, we showcase the most recent advances in bioengineering 3D-bioprinted cancer-on-a-chip platforms and provide a comprehensive discussion on design guidelines and possibilities for high-throughput analysis. Such hybrid platforms represent a new generation of highly sophisticated 3D tumor models with improved biomimicry and predictability of therapeutics performance.

Brewer's yeast polysaccharides - A review of their exquisite structural features and biomedical applications

Recent advances on brewer's yeast cell wall polysaccharides have unraveled exquisite structural features and diverse composition with (β1→3), (β1→6), (α1→4), (β1→4)-mix-linked glucans that are recognized to interact with different cell receptors and trigger specific biological responses. Herein, a comprehensive showcase of structure-biofunctional relationships between yeast polysaccharides and their biological targets is highlighted, with a focus on polysaccharide features that govern the biomedical activity. The insolubility of β-glucans is a crucial factor for binding and activation of Dectin-1 receptor, operating as adjuvants of immune responses. Contrarily, soluble low molecular weight β-glucans have a strong inhibition of reactive oxygen species production, acting as antagonists of Dectin-1 mediated signaling. Soluble glucan-protein moieties can also act as antitumoral agents. The balance between mannoproteins-TLR2 and β-glucans-Dectin-1 receptors-activation is crucial for osteogenesis. Biomedical applications value can also be obtained from yeast microcapsules as oral delivery systems, where highly branched (β1→6)-glucans lead to higher receptor affinity.

Engineering mammalian living materials towards clinically relevant therapeutics

Engineered living materials represent a new generation of human-made biotherapeutics that are highly attractive for a myriad of medical applications. In essence, such cell-rich platforms provide encodable bioactivities with extended lifetimes and environmental multi-adaptability currently unattainable in conventional biomaterial platforms. Emerging cell bioengineering tools are herein discussed from the perspective of materializing living cells as cooperative building blocks that drive the assembly of multiscale living materials. Owing to their living character, pristine cellular units can also be imparted with additional therapeutically-relevant biofunctionalities. On this focus, the most recent advances on the engineering of mammalian living materials and their biomedical applications are herein outlined, alongside with a critical perspective on major roadblocks hindering their realistic clinical translation. All in all, transposing the concept of leveraging living materials as autologous tissue-building entities and/or self-regulated biotherapeutics opens new realms for improving precision and personalized medicine strategies in the foreseeable future.

Coordination Compounds As Multi-Delivery Systems for Osteoporosis

Osteoporosis therapies leveraging bisphosphonates and mineral components (e.g., magnesium, calcium, and strontium) have been raising attention because of their potential for managing this ever-growing disease. The administration of multicomponent therapeutics (combined therapy) in elderly patients is complex and suffers from low patient adherence. Herein, we report an all-in-one combination of four antiosteoporotic components into a new family of coordination complexes: [M₂(H₄alen)₄(H₂O)₂]·1.5H₂O [where M²⁺ = Mg²⁺ (1), (Mg_0.535Ca_0.465)²⁺ (2) and (Mg_0.505Ca_0.450Sr_0.045)²⁺ (3)]. These solid-state complexes were prepared, for the first time, through microwave-assisted synthesis. It is demonstrated that the compounds are capable of releasing their antiosteoporotic components, both in conditions that mimic the path along the gastrointestinal tract and in long periods under physiological conditions (pH ∼7.4). More importantly, when administered in low concentrations, the compounds did not elicit a cytotoxic effect toward liver, kidney, and osteoblast-like cell lines. Besides, it is important to highlight the unique coordination complex with four bone therapeutic components, [(Mg_0.505Ca_0.450Sr_0.045)₂(H₄alen)₄(H₂O)₂]·1.5H₂O (3), which significantly promoted osteoblast metabolic activity up to ca. 1.4-fold versus the control group. These findings bring this type of compounds one-step closer to be considered as an all-in-one and more effective treatment for managing chronic bone diseases, prompting further research on their therapeutic properties.

Organotypic 3D decellularized matrix tumor spheroids for high-throughput drug screening

Decellularized extracellular matrix (dECM) is emerging as a valuable tool for generating 3D in vitro tumor models that better recapitulate tumor-stroma interactions. However, the development of dECM-3D heterotypic microtumors exhibiting a controlled morphology is yet to be materialized. Precisely controlling microtumors morphologic features is key to avoid an inaccurate evaluation of therapeutics performance during preclinical screening. To address this, herein we employed ultra-low adhesion surfaces for bioengineering organotypic 3D metastatic breast cancer-fibroblast models enriched with dECM microfibrillar fragments, as a bottom-up strategy to include major matrix components and their associated biomolecular cues during the early stages of 3D microtissue spheroids assembly, simulating pre-existing ECM presence in the in vivo setting. This biomimetic approach enabled the self-assembly of dECM-3D tumor-stroma spheroids with tunable size and reproducible morphology. Along time, dECM enriched and stroma-rich microtumors exhibited necrotic core formation, secretion of key biomarkers and higher cancer-cell specific resistance to different chemotherapeutics in comparison to standard spheroids. Exometabolomics profiling of dECM-Spheroid in vitro models further identified important breast cancer metabolic features including glucose/pyruvate consumption and lactate excretion, which suggest an intense glycolytic activity, recapitulating major hallmarks of the native microenvironment. Such organotypic dECM-enriched microtumors overcome the morphologic variability generally associated with cell-laden dECM models, while providing a scalable testing platform that can be foreseeable leveraged for high-throughput screening of candidate therapeutics.

Double network laminarin-boronic/alginate dynamic bioink for 3D bioprinting cell-laden constructs

The design of dynamically crosslinked hydrogel bioinks for three-dimensional (3D) bioprinting is emerging as a valuable strategy to advance the fabrication of mechanically tuneable cell-laden constructs for 3Din vitrodisease modelling and tissue engineering applications. Herein, a dynamic bioink comprising boronic acid-functionalised laminarin and alginate is explored for bioprinting 3D constructs under physiologically relevant conditions. The formulated bioink takes advantage of a double crosslinked network that combines covalent but reversible boronate ester bonds and ionic gelation via divalent cations. Moreover, it exhibits suitable rheological properties and improved mechanical features owing to its modular crosslinking chemistry, yielding stable constructs with user-programmable architecture. We explored such dynamic bioink as a supporting matrix for different cell classes, namely osteoblast precursors, fibroblasts and breast cancer cells. The resulting cell-laden bioprinted hydrogels display a homogeneous cell distribution post-printing and exceptional cell viability (>90%) that can be maintained for prolonged time periods in culture (14 days) for all cell lines. This simple and chemically versatile approach is envisaged to accelerate the development of multifunctional bioinks and contribute towards the fabrication of biomimetic 3D scaffolds with applicability in a wide range of predictive or exploratory biomedical platforms.

Stratified 3D Microtumors as Organotypic Testing Platforms for Screening Pancreatic Cancer Therapies

Cancer-associated pancreatic stellate cells installed in periacinar/periductal regions are master players in generating the characteristic biophysical shield found in pancreatic ductal adenocarcinoma (PDAC). Recreating this unique PDAC stromal architecture and its desmoplastic microenvironment in vitro is key to discover innovative treatments. However, this still remains highly challenging to realize. Herein, organotypic 3D microtumors that recapitulate PDAC-stroma spatial bioarchitecture, as well as its biomolecular, metabolic, and desmoplastic signatures, are bioengineered. Such newly engineered platforms, termed stratified microenvironment spheroid models - STAMS - mimic the spatial stratification of cancer-stromal cells, exhibit a reproducible morphology and sub-millimeter size. In culture, 3D STAMS secrete the key molecular biomarkers found in human pancreatic cancer, namely TGF-β, FGF-2, IL-1β, and MMP-9, among others. This is accompanied by an extensive desmoplastic reaction where collagen and glycosaminoglycans (GAGs) de novo deposition is observed. These stratified models also recapitulate the resistance to various chemotherapeutics when compared to standard cancer-stroma random 3D models. Therapeutics resistance is further evidenced upon STAMS inclusion in a tumor extracellular matrix (ECM)-mimetic hydrogel matrix, reinforcing the importance of mimicking PDAC-stroma bioarchitectural features in vitro. The 3D STAMS technology represents a next generation of biomimetic testing platforms with improved potential for advancing high-throughput screening and preclinical validation of innovative pancreatic cancer therapies.

Proteinaceous Hydrogels for Bioengineering Advanced 3D Tumor Models

The establishment of tumor microenvironment using biomimetic in vitro models that recapitulate key tumor hallmarks including the tumor supporting extracellular matrix (ECM) is in high demand for accelerating the discovery and preclinical validation of more effective anticancer therapeutics. To date, ECM-mimetic hydrogels have been widely explored for 3D in vitro disease modeling owing to their bioactive properties that can be further adapted to the biochemical and biophysical properties of native tumors. Gathering on this momentum, herein the current landscape of intrinsically bioactive protein and peptide hydrogels that have been employed for 3D tumor modeling are discussed. Initially, the importance of recreating such microenvironment and the main considerations for generating ECM-mimetic 3D hydrogel in vitro tumor models are showcased. A comprehensive discussion focusing protein, peptide, or hybrid ECM-mimetic platforms employed for modeling cancer cells/stroma cross-talk and for the preclinical evaluation of candidate anticancer therapies is also provided. Further development of tumor-tunable, proteinaceous or peptide 3D microtesting platforms with microenvironment-specific biophysical and biomolecular cues will contribute to better mimic the in vivo scenario, and improve the predictability of preclinical screening of generalized or personalized therapeutics.

GelMA/bioactive silica nanocomposite bioinks for stem cell osteogenic differentiation

Leveraging 3D bioprinting for processing stem cell-laden biomaterials has unlocked a tremendous potential for fabricating living 3D constructs for bone tissue engineering. Even though several bioinks developed to date display suitable physicochemical properties for stem cell seeding and proliferation, they generally lack the nanosized minerals present in native bone bioarchitecture. To enable the bottom-up fabrication of biomimetic 3D constructs for bioinstructing stem cells pro-osteogenic differentiation, herein we developed multi-bioactive nanocomposite bioinks that combine the organic and inorganic building blocks of bone. For the organic component gelatin methacrylate (GelMA), a photocrosslinkable denaturated collagen derivative used for 3D bioprinting was selected due to its rheological properties display of cell adhesion moities to which bone tissue precursors such as human bone marrow derived mesenchymal stem cells (hBM-MSCs) can attach to. The inorganic building block was formulated by incorporating mesoporous silica nanoparticles functionalized with calcium, phosphate and dexamethasone (MSNCaPDex), which previously proven to induce osteogenic differentiation. The newly formulated photocrosslinkable nanocomposite GelMA bioink incorporating MSNCaPDex nanoparticles and laden with hBM-MSCs was sucessfully processed into a 3D bioprintable construct with structural fidelity and well dispersed nanoparticles throughout the hydrogel matrix. These nanocomposite constructs could induce the deposition of apatite in vitro, thus showing attractive bioactivity properties. Viability and differentiation studies showed that hBM-MSCs remained viable and exhibited osteogenic differentiation biomarkers when incorporated in GelMA/MSNCaPDex constructs and without requiring further biochemical nor mechanical stimuli. Overall, our nanocomposite bioink has demonstrated excellent processability via extrusion bioprinting into osteogenic constructs with potential application in bone tissue repair and regeneration.

Screening of dual chemo-photothermal cellular nanotherapies in organotypic breast cancer 3D spheroids

Living therapeutics approaches that exploit mesenchymal stem cells (MSCs) as nanomedicine carriers are highly attractive due to MSCs native tropism toward the 3D tumor microenvironment. However, a streamlined pre-clinical evaluation of nano-in-cell anti-cancer therapies remains limited by the lack of in vitro testing platforms for screening MSCs-3D microtumor interactions. Herein we generated dense breast cancer mono and heterotypic 3D micro-spheroids for evaluating MSCs-solid tumors interactions and screen advanced nano-in-MSCs therapies. Breast cancer monotypic and heterotypic models comprising cancer cells and cancer associated fibroblasts (CAFs) were self-assembled under controlled conditions using the liquid overlay technique. The resulting microtumors exhibited high compactness, reproducible morphology and necrotic regions, similarly to native solid tumors. For evaluating tumoritropic therapies in organotypic tumor-stroma 3D models, theranostic polydopamine nanoparticles loaded with indocyanine green-doxorubicin combinations (PDA-ICG-DOX) were synthesized and administered to human bone-marrow derived MSCs (hBM-MSCs). The dual-loaded PDA nano-platforms were efficiently internalized, exhibited highly efficient NIR-light responsivity and assured MSCs viability up to 3 days. The administration of PDA-ICG-DOX nano-in-MSC tumoritropic units to microtumor models was performed in ultra-low adhesion surfaces for simulating in vitro the stem cell-tumor interactions observed in the in vivo scenario. Bioimaging analysis revealed hBM-MSCs adhesion to 3D cancer cells mass and MSCs-chemo-photothermal nanotherapeutics exhibited higher anti-tumor potential when compared to their standalone chemotherapy treated 3D tumor counterparts. Overall, the proposed methodology is suitable for evaluating MSCs-microtumors individualized interactions and enables a rapid high-throughput screening of tumoritropic therapies bioperformance.

Differential Modulation of the Phospholipidome of Proinflammatory Human Macrophages by the Flavonoids Quercetin, Naringin and Naringenin

The immunomodulatory activity of flavonoids is increasingly appreciated. Macrophage phospholipids (PLs) play crucial roles in cell-mediated inflammatory responses. However, little is known on how these PLs are affected upon flavonoid treatment. In this work, we have used mass-spectrometry-based lipidomics to characterize the changes in the phospholipidome of proinflammatory human-macrophage-like cells (THP-1-derived and LPS+IFN-γ-stimulated) incubated with non-cytotoxic concentrations of three flavonoids: quercetin, naringin and naringenin. One hundred forty-seven PL species belonging to various classes were identified, and their relative abundances were determined. Each flavonoid displayed its own unique signature of induced effects. Quercetin produced the strongest impact, acting both on constitutive PLs (phosphatidylcholines, phosphatidylethanolamines and sphingomyelins) and on minor signaling lipids, such as phosphatidylinositol (PI) and phosphatidylserine (PS) species. Conversely, naringin hardly affected structural PLs, producing changes in signaling molecules that were opposite to those seen in quercetin-treated macrophages. In turn, albeit sharing some effects with quercetin, naringenin did not change PI and PS levels and interfered with a set of phosphatidylcholines distinct from those modulated by quercetin. These results demonstrate that flavonoids bioactivity involves profound and specific remodeling of macrophage phospholipidome, paving the way to future studies on the role of cellular phospholipids in flavonoid-mediated immunomodulatory effects.

Self-Assembled Bioactive Colloidal Gels as Injectable Multiparticle Shedding Platforms

Self-assembled colloidal gels are highly versatile 3D nanocluster platforms with potential to overcome the rapid clearing issues associated with standard free nanotherapeutics administration. However, the development of nanoassembled colloidal gels exhibiting autonomous multiparticle release from the bulk particle network remains elusive. Herein, we generated multiparticle colloidal gels from two nanosized building blocks: cationic poly(d,l-lactide-co-glycolide)-polyethylenimine (PLGA-PEI) nanoparticles and anionic zein-hyaluronan (HA) nanogels that assemble into macrosized 3D constructs via attractive electrostatic forces. The resulting colloidal gels exhibited high stability in complex culture medium as well as fit-to-shape moldable properties and injectability. Moreover, nanoassembled colloidal gels encapsulated bioactive quercetin flavonoids with high loading efficacy and presented remarkable anti-inflammatory activities, reducing key proinflammatory biomarkers in inflammation-activated macrophages. More importantly, because of their rationally selected building blocks zein-HA/PLGA-PEI, self-assembled colloidal platforms displayed autonomous multiparticle shedding. Both positive and negative particles released from the colloidal system were efficiently internalized by macrophages along time as evidenced by quantitative particle uptake analysis. Overall, the generated nanostructured gels represent an implantable versatile platform for focalized multiparticle delivery. In addition, the possibility to combine a higher number of particle species with different properties or stimuli-responsiveness enables the manufacturing of combinatorial nanostructured gels for numerous biomedical applications.

Freeform 3D printing using a continuous viscoelastic supporting matrix

Embedded bio-printing has fostered significant advances toward the fabrication of soft complex tissue-like constructs, by providing a physical support that allows the freeform shape maintenance within the prescribed spatial arrangement, even under gravity force. Current supporting materials still present major drawbacks for up-scaling embedded 3D bio-printing technology towards tissue-like constructs with clinically relevant dimensions. Herein, we report a a cost-effective and widely available supporting material for embedded bio-printing consisting on a continuous pseudo-plastic matrix of xanthan-gum (XG). This natural polisaccharide exhibits peculiar rheological properties that have enabled the rapid generation of complex volumetric 3D constructs with out-of-plane features. The freedom of design within the three orthogonal axes through the independent and controlled bio-printing process opens new opportunities to produce on demand large arbitrary shapes for personalized medicine. Additionally, we have demonstrated the versatile functionality of XG as a photocurable gel reservoir to engineer perfused cell-laden hydrogel constructs, addressing other practical biomedical applications such as in vitro models and organ-on-chip platforms.

Decellularized Extracellular Matrix for Bioengineering Physiomimetic 3D in Vitro Tumor Models

Recent advances in the extraction and purification of decellularized extracellular matrix (dECM) obtained from healthy or malignant tissues open new avenues for engineering physiomimetic 3D in vitro tumor models, which closely recapitulate key biomolecular hallmarks and the dynamic cancer cell-ECM interactions in the tumor microenvironment. We review current and upcoming methodologies for chemical modification of dECM-based biomaterials and advanced bioprocessing into organotypic 3D solid tumor models. A comprehensive review of disruptive advances and shortcomings of exploring dECM-based biomaterials for recapitulating the native tumor-supporting matrix is also provided. We hope to drive the discussion on how 3D dECM testing platforms can be leveraged for generating microphysiological tumor surrogates that generate more robust and predictive data on therapeutic bioperformance.

Mechanochemical Patternable ECM-Mimetic Hydrogels for Programmed Cell Orientation

Native human tissues are supported by a viscoelastic extracellular matrix (ECM) that can adapt its intricate network to dynamic mechanical stimuli. To recapitulate the unique ECM biofunctionality, hydrogel design is shifting from typical covalent crosslinks toward covalently adaptable networks. To pursue such properties, herein hybrid polysaccharide-polypeptide networks are designed based on dynamic covalent assembly inspired by natural ECM crosslinking processes. This is achieved through the synthesis of an amine-reactive oxidized-laminarin biopolymer that can readily crosslink with gelatin (oxLAM-Gelatin) and simultaneously allow cell encapsulation. Interestingly, the rational design of oxLAM-Gelatin hydrogels with varying aldehyde-to-amine ratios enables a refined control over crosslinking kinetics, viscoelastic properties, and degradability profile. The mechanochemical features of these hydrogels post-crosslinking offer an alternative route for imprinting any intended nano- or microtopography in ECM-mimetic matrices bearing inherent cell-adhesive motifs. Different patterns are easily paved in oxLAM-Gelatin under physiological conditions and complex topographical configurations are retained along time. Human adipose-derived mesenchymal stem cells contacting mechanically sculpted oxLAM-Gelatin hydrogels sense the underlying surface nanotopography and align parallel to the anisotropic nanoridge/nanogroove intercalating array. These findings demonstrate that covalently adaptable features in ECM-mimetic networks can be leveraged to combine surface topography and cell-adhesive motifs as they appear in natural matrices.

Advanced Bottom-Up Engineering of Living Architectures

Bottom-up tissue engineering is a promising approach for designing modular biomimetic structures that aim to recapitulate the intricate hierarchy and biofunctionality of native human tissues. In recent years, this field has seen exciting progress driven by an increasing knowledge of biological systems and their rational deconstruction into key core components. Relevant advances in the bottom-up assembly of unitary living blocks toward the creation of higher order bioarchitectures based on multicellular-rich structures or multicomponent cell-biomaterial synergies are described. An up-to-date critical overview of long-term existing and rapidly emerging technologies for integrative bottom-up tissue engineering is provided, including discussion of their practical challenges and required advances. It is envisioned that a combination of cell-biomaterial constructs with bioadaptable features and biospecific 3D designs will contribute to the development of more robust and functional humanized tissues for therapies and disease models, as well as tools for fundamental biological studies.

Hydrogel 3D in vitro tumor models for screening cell aggregation mediated drug response

Hydrogel-based 3D in vitro models comprising tumor ECM-mimetic biomaterials exhibit differential responses to therapeutics according to cancer cells cellular aggregation state.

Flavonoid-mediated immunomodulation of human macrophages involves key metabolites and metabolic pathways

The ability of flavonoids to attenuate macrophage pro-inflammatory activity and to promote macrophage-mediated resolution of inflammation is still poorly understood at the biochemical level. In this study, we have employed NMR metabolomics to assess how therapeutically promising flavonoids (quercetin, naringenin and naringin) affect the metabolism of human macrophages, with a view to better understand their biological targets and activity. In vitro-cultured human macrophages were polarized to the pro-inflammatory M1 phenotype, through incubation with LPS + IFN-γ, and subsequently treated with each flavonoid. The metabolic signatures of pro-inflammatory polarization and of flavonoid incubations were then characterized and compared. The results showed that all flavonoids modulated the cells endometabolome with the strongest impact being observed for quercetin. Many of the flavonoid-induced metabolic variations were in the opposite sense to those elicited by pro-inflammatory stimulation. In particular, the metabolic processes proposed to reflect flavonoid-mediated immunomodulation of macrophages included the downregulation of glycolytic activity, observed for all flavonoids, anti-inflammatory reprogramming of the TCA cycle (mainly quercetin), increased antioxidant protection (quercetin), osmoregulation (naringin), and membrane modification (naringenin). This work revealed key metabolites and metabolic pathways involved in macrophage responses to quercetin, naringenin and naringin, providing novel insights into their immunomodulatory activity.

In-air production of 3D co-culture tumor spheroid hydrogels for expedited drug screening

Three-dimensional (3D) in vitro tumor spheroids are becoming popular as pre-clinical platforms for testing the performance of existing drugs or for discovery of innovative anti-cancer therapeutics. This focus is correlated with in vitro 3D tumor models ability to mimic the multicellular compact structure and spatial architecture of human solid tumors. However, these microphysiological systems generally lack the pre-existence of tumor-ECM, a critical aspect that can affect the overall therapeutic performance and the decision of advancing candidate drugs to later stages of the pipeline. Aiming to face this drawback and mimic tumors-ECM, herein we rapidly fabricated in-air hyaluronan-methacrylate (HA-MA) and gelatin-methacrylate (GelMA) photocrosslinkable 3D spheroid microgels by using superhydrophobic surfaces. These platforms were used for establishing heterotypic 3D co-culture models of prostate cancer cells (PC-3) and human osteoblasts (hOB) to mimic prostate cancer-to-bone metastasis cellular heterogeneity and the tumor-ECM microenvironment. 3D microgel microtumors morphology, size and cell number were easily controlled via digital droplet generation on polystyrene superhydrophobic surfaces and under solvent-free conditions when compared to microfluidics or electrospray. Co-culture 3D microgels formed by 2.5%HA-MA-5%GelMA and 5%HA-MA-5%GelMA ratios showed the highest calcium deposition after 14 days of culture, evidencing osteoblasts viability and the establishment of functional mineralization in the 3D hydrogel matrix. Cisplatin cytotoxicity evaluation showed that 3D microgels are more resistant to platin chemotherapeutics than single or co-culture 3D multicellular spheroid counterparts. Overall, our findings indicate that solvent-free, in-air produced 3D microgel microenvironments are cost-effective and robust tumor mimicking platforms for in vitro high-throughput screening of therapeutics targeted to prostate-to-bone metastasis microenvironments. STATEMENT OF SIGNIFICANCE: The generation of robust microphysiological systems that recapitulate the complexity of the metastatic prostate-to-bone tumor microenvironment is crucial for pre-clinical evaluation of new therapeutics that can eradicate these secondary tumors. In this study, we employed superhydrophobic (SH) surfaces to rapidly fabricate photocrosslinkable hyaluronan-methacrylate/gelatin-methacrylate 3D spheroid microgels for prostate cancer cells and human osteoblasts co-culture models that simultaneously mimic the cellular and ECM tumor components. The use of SH platforms overcomes the issues of standard in-liquid microgel production technologies by providing a robust control over 3D microgels size/morphology and cell-cell co-encapsulation numbers, while avoiding the use of oil-based microgel droplets generation. Overall, SH surfaces allowed a solvent-free, cost-effective, reproducible and adaptable fabrication of heterotypic 3D spherical microgels for high throughput drug screening.

Bioinstructive Naringin-Loaded Micelles for Guiding Stem Cell Osteodifferentiation

Naringin is a naturally occurring flavanone with recognized neuroprotective, cardioprotective, anti-inflammatory, and antiosteoporotic properties. Herein, the delivery of Naringin-loaded methoxy-poly(ethylene glycol)-maleimide-thiol-poly(l-lactide) (mPEGMSPLA) diblock polymeric micelles to human adipose-derived stem cells (hASCs) with the aim to augment its pro-osteogenic effect in these cells is reported for the first time. The synthesis of the diblock copolymer is performed via Michael-type addition reaction between hydrophilic methoxy-poly(ethylene glycol)-maleimide (mPEGMAL) and hydrophobic thiol-poly(l-lactide) (PLASH) and confirmed by ¹ H NMR and attenuated total reflectance Fourier transformed infrared (ATR-FTIR) spectroscopy. The resulting mPEGMSPLA copolymer self-assembles into monodispersed polymeric micelles (≈84.4 ± 2 nm) and presents a high Naringin encapsulation efficiency (87.8 ± 4%), with a sustained release profile at physiological pH. Alongside, in vitro data reveal that upon internalization into hASC 2D cultures, Naringin nanomicellar formulations attain a higher pro-osteogenic effect than that of free drug. Notably, these bioactive carriers also induce superior osteopontin expression and increase matrix mineralization in these cells over free drug administration. Overall, such findings support for the first time the use of polymeric nanomicelles for Naringin delivery into hASCs as a valid approach for modulating stem cell osteogenic differentiation.

Design of spherically structured 3D in vitro tumor models -Advances and prospects

Three-dimensional multicellular tumor models are receiving an ever-growing focus as preclinical drug-screening platforms due to their potential to recapitulate major physiological features of human tumors in vitro. In line with this momentum, the technologies for assembly of 3D microtumors are rapidly evolving towards a comprehensive inclusion of tumor microenvironment elements. Customized spherically structured platforms, including microparticles and microcapsules, provide a robust and scalable technology to imprint unique biomolecular tumor microenvironment hallmarks into 3D in vitro models. Herein, a comprehensive overview of novel advances on the integration of tumor-ECM components and biomechanical cues into 3D in vitro models assembled in spherical shaped platforms is provided. Future improvements regarding spatiotemporal/mechanical adaptability, and degradability, during microtumors in vitro 3D culture are also critically discussed considering the realistic potential of these platforms to mimic the dynamic tumor microenvironment. From a global perspective, the production of 3D multicellular spheroids with tumor ECM components included in spherical models will unlock their potential to be used in high-throughput screening of therapeutic compounds. It is envisioned, in a near future, that a combination of spherically structured 3D microtumor models with other advanced microfluidic technologies will properly recapitulate the flow dynamics of human tumors in vitro.

STATEMENT OF SIGNIFICANCE

The ability to correctly mimic the complexity of the tumor microenvironment in vitro is a key aspect for the development of evermore realistic in vitro models for drug-screening and fundamental cancer biology studies. In this regard, conventional spheroid-based 3D tumor models, combined with spherically structured biomaterials, opens the opportunity to precisely recapitulate complex cell-extracellular matrix interactions and tumor compartmentalization. This review provides an in-depth focus on current developments regarding spherically structured scaffolds engineered into in vitro 3D tumor models, and discusses future advances toward all-encompassing platforms that may provide an improved in vitro/in vivo correlation in a foreseeable future.

Preparation of Well-Dispersed Chitosan/Alginate Hollow Multilayered Microcapsules for Enhanced Cellular Internalization

Hollow multilayered capsules have shown massive potential for being used in the biomedical and biotechnology fields, in applications such as cellular internalization, intracellular trafficking, drug delivery, or tissue engineering. In particular, hollow microcapsules, developed by resorting to porous calcium carbonate sacrificial templates, natural-origin building blocks and the prominent Layer-by-Layer (LbL) technology, have attracted increasing attention owing to their key features. However, these microcapsules revealed a great tendency to aggregate, which represents a major hurdle when aiming for cellular internalization and intracellular therapeutics delivery. Herein, we report the preparation of well-dispersed polysaccharide-based hollow multilayered microcapsules by combining the LbL technique with an optimized purification process. Cationic chitosan (CHT) and anionic alginate (ALG) were chosen as the marine origin polysaccharides due to their biocompatibility and structural similarity to the extracellular matrices of living tissues. Moreover, the inexpensive and highly versatile LbL technology was used to fabricate core-shell microparticles and hollow multilayered microcapsules, with precise control over their composition and physicochemical properties, by repeating the alternate deposition of both materials. The microcapsules' synthesis procedure was optimized to extensively reduce their natural aggregation tendency, as shown by the morphological analysis monitored by advanced microscopy techniques. The well-dispersed microcapsules showed an enhanced uptake by fibroblasts, opening new perspectives for cellular internalization.

Bioreducible poly(2-ethyl-2-oxazoline)-PLA-PEI-SS triblock copolymer micelles for co-delivery of DNA minicircles and Doxorubicin

The co-delivery of minicircle DNA (mcDNA) and small anti-cancer drugs via stimuli-sensitive nanocarriers is a promising approach for combinatorial cancer therapy. However, the simultaneous loading of drugs and DNA in nanosized delivery systems is remarkably challenging. In this study we describe the synthesis of triblock copolymer micelles based on poly(2-ethyl-2-oxazoline)-poly(L-lactide) grafted with bioreducible polyethylenimine (PEOz-PLA-g-PEI-SS) for co-delivery of supercoiled (sc) mcDNA vectors and Doxorubicin (Dox). These amphiphilic carriers take advantage of non-fouling oxazolines to confer biological stability, of PLA to provide a hydrophobic core for drug encapsulation and of bioreducible PEI-SS to provide mcDNA complexation and an on-demand stimuli-responsive release. The obtained results show that mcDNA-loaded micelleplexes penetrate into in vitro tumor spheroid models with specific kinetics and exhibit a higher gene expression when compared to non-bioreducible nanocarriers. Moreover, in vivo bioluminescence imaging showed that gene expression is detected up to 8days following mcDNA-micelles intratumoral administration. Furthermore, drug-gene co-delivery in PEOz-PLA-g-PEI-SS carriers was verified by successful encapsulation of both Dox and mcDNA with high efficacy. Moreover, dual-loaded micelleplexes presented significant uptake and a cytotoxic effect in 2D cultures of cancer cells. The co-delivery of mcDNA-Dox to B16F10-Luciferase tumor bearing mice resulted in a reduction in tumor volume and cancer cells viability. Overall, such findings indicate that bioreducible triblock micelles are efficient for focal delivery in vivo and have potential for future application in combinatorial DNA-drug therapy.

Gas-generating TPGS-PLGA microspheres loaded with nanoparticles (NIMPS) for co-delivery of minicircle DNA and anti-tumoral drugs

Drug-DNA combination therapies are receiving an ever growing focus due to their potential for improving cancer treatment. However, such approaches are still limited by the lack of multipurpose delivery systems that encapsulate drugs and condense DNA simultaneously. In this study, we describe the successful formulation of gas-generating pH-responsive D-α-tocopherol PEG succinate-poly(D,L-lactic-co-glycolic acid) (TPGS-PLGA) hollow microspheres loaded with both Doxorubicin (Dox) and minicircle DNA (mcDNA) nanoparticles as a strategy to co-deliver these therapeutics. For this study mcDNA vectors were chosen due to their increased therapeutic efficiency in comparison to standard plasmid DNA. The results demonstrate that TPGS-PLGA microcarriers can encapsulate Dox and chitosan nanoparticles completely condense mcDNA. The loading of mcDNA-nanoparticles into microspheres was confirmed by 3D confocal microscopy and co-localization analysis. The resulting TPGS-PLGA-Dox-mcDNA nanoparticle-in-microsphere hybrid carriers exhibit a well-defined spherical shape and neutral surface charge. Microcarriers incubation in acidic pH produced a gas-mediated Dox release, corroborating the microcarriers stimuli-responsive character. Also, the dual-loaded TPGS-PLGA particles achieved 5.2-fold higher cellular internalization in comparison with non-pegylated microspheres. This increased intracellular concentration resulted in a higher cytotoxic effect. Successful transgene expression was obtained after nanoparticle-mcDNA co-delivery in the microspheres. Overall these findings support the concept of using nanoparticle-microsphere multipart systems to achieve efficient co-delivery of various drug-mcDNA combinations.

Chitosan/arginine-chitosan polymer blends for assembly of nanofibrous membranes for wound regeneration

Frequently, skin is subjected to damaging events, such as deep cuts, burns or ulcers, which may compromise the integrity of this organ. To overcome such lesions, different strategies have been employed. Among them, wound dressings aimed to re-establish skin native properties and decreased patient pain have been pursued for a long time. Herein, an electrospun membrane comprised by deacetylated/arginine modified chitosan (CH-A) was produced to be used as a wound dressing. The obtained results showed that the membrane has a highly hydrophilic and porous three-dimensional nanofibrous network similar to that found in human native extracellular matrix. In vitro data indicate that human fibroblasts adhere and proliferate in contact with membranes, thus corroborating their biocompatibility. This nanofiber-based biomaterial also demonstrated bactericidal activity for two bacterial strains. In vivo application of CH-A nanofibers in full thickness wounds resulted in an improved tissue regeneration and faster wound closure, when compared to non-modified membranes. Such findings support the suitability of using this membrane as a wound dressing in a near future.

Combinatorial delivery of Crizotinib-Palbociclib-Sildenafil using TPGS-PLA micelles for improved cancer treatment

The co-delivery of multiple chemotherapeutics by micellar delivery systems is a valuable approach to improve cancer treatment since various disease hallmarks can be targeted simultaneously. However, the delivery of multiple drugs requires a nanocarrier structure that can encapsulate various bioactive molecules. In this study, we evaluate the simultaneous encapsulation of a novel triple drug combination in D-α-tocopheryl polyethylene glycol 1000 succinate-poly(lactic acid) (TPGS-PLA) amphiphilic micelles for cancer therapy. The drug mixture involves two anti-tumoral drugs, Crizotinib and Palbociclib combined with Sildenafil, a compound that is capable of increasing drug accumulation in the intracellular compartment. Such combination aims to achieve an enhanced cytotoxic effect in cancer cells. Our results demonstrated that TPGS-PLA copolymers self-assembled into stable nanosized micelles (158.3nm) capable of co-encapsulating the three drugs with high loading efficiency. Triple drug loaded TPGS-PLA micelles were internalized in A549 non-small lung cancer cells and exhibited an improved cytotoxic effect in comparison with single (Crizotinib) or dual (Crizotinib-Palbociclib) drug loaded micelles, indicating the therapeutic potential of the triple co-delivery strategy. These findings demonstrate that TPGS-PLA micelles are suitable carriers for multiple drug delivery and also that this particular drug combination may have potential to improve cancer treatment.

Poly(2-ethyl-2-oxazoline)-PLA-g-PEI amphiphilic triblock micelles for co-delivery of minicircle DNA and chemotherapeutics

The design of nanocarriers for the delivery of drugs and nucleic-acids remains a very challenging goal due to their physicochemical differences. In addition, the reported accelerated clearance and immune response of pegylated nanomedicines highlight the necessity to develop carriers using new materials. Herein, we describe the synthesis of amphiphilic triblock poly(2-ethyl-2-oxazoline)-PLA-g-PEI (PEOz-PLA-g-PEI) micelles for the delivery of minicircle DNA (mcDNA) vectors. In this copolymer the generally used PEG moieties are replaced by the biocompatible PEOz polymer backbone that assembles the hydrophilic shell. The obtained results show that amphiphilic micelles have low critical micellar concentration, are hemocompatible and exhibit stability upon incubation in serum. The uptake in MCF-7 cells was efficient and the nanocarriers achieved 2.7 fold higher expression than control particles. Moreover, mcDNA-loaded micelleplexes penetrated into 3D multicellular spheroids and promoted widespread gene expression. Additionally, to prove the concept of co-delivery, mcDNA and doxorubicin (Dox) were simultaneously encapsulated in PEOz-PLA-g-PEI carriers, with high efficiency. Dox-mcDNA micelleplexes exhibited extensive cellular uptake and demonstrated anti-tumoral activity. These findings led us to conclude that this system has a potential not only for the delivery of novel mcDNA vectors, but also for the co-delivery of drug-mcDNA combinations without PEG functionalization.

Manufacture of β-TCP/alginate scaffolds through a Fab@home model for application in bone tissue engineering

The growing need to treat bone-related diseases in an elderly population compels the development of novel bone substitutes to improve patient quality of life. In this context, the advent of affordable and effective rapid prototyping equipment, such as the Fab@home plotter, has contributed to the development of novel scaffolds for bone tissue engineering. In this study, we report for the first time the use of a Fab@home plotter for the production of 3D scaffolds composed by beta-tricalcium phosphate (β-TCP)/alginate hybrid materials. β-TCP/alginate mixtures were used in a proportion of 50/50% (w/w), 30/70% (w/w) and 20/80% (w/w). The printing parameters were optimized to a nozzle diameter of 20 Gauge for the production of rigid scaffolds with pre-defined architectures. We observed that, despite using similar printing parameters, both the precision and resolution of the scaffolds were significantly affected by the blend's viscosity. In particular, we demonstrate that the higher viscosity of 50/50 scaffolds (150.0 ± 3.91 mPa s) provides a higher precision in the extrusion process. The physicochemical and biological characterization of the samples demonstrated that the 50/50 scaffolds possessed a resistance to compression comparable to that of native trabecular bone. Moreover, this particular formulation also exhibited a Young's modulus that was higher than that of trabecular bone. Scanning electron microscopy and fluorescence microscopy analysis revealed that osteoblasts were able to adhere, proliferate and also penetrate into the scaffold's architecture. Altogether, our findings suggest that the Fab@home printer can be employed in the manufacture of reproducible scaffolds, using a formulation 50/50 alginate-β-TCP that has suitable properties to be applied as bone substitutes in the future.

Optimization of liquid overlay technique to formulate heterogenic 3D co-cultures models

Three-dimensional (3D) cell culture models of solid tumors are currently having a tremendous impact in the in vitro screening of candidate anti-tumoral therapies. These 3D models provide more reliable results than those provided by standard 2D in vitro cell cultures. However, 3D manufacturing techniques need to be further optimized in order to increase the robustness of these models and provide data that can be properly correlated with the in vivo situation. Therefore, in the present study the parameters used for producing multicellular tumor spheroids (MCTS) by liquid overlay technique (LOT) were optimized in order to produce heterogeneous cellular agglomerates comprised of cancer cells and stromal cells, during long periods. Spheroids were produced under highly controlled conditions, namely: (i) agarose coatings; (ii) horizontal stirring, and (iii) a known initial cell number. The simultaneous optimization of these parameters promoted the assembly of 3D characteristic cellular organization similar to that found in the in vivo solid tumors. Such improvements in the LOT technique promoted the assembly of highly reproducible, individual 3D spheroids, with a low cost of production and that can be used for future in vitro drug screening assays.

Synthesis and characterization of micelles as carriers of non-steroidal anti-inflammatory drugs (NSAID) for application in breast cancer therapy

Non-steroidal anti-inflammatory drugs (NSAIDS) are emerging as a particularly valuable class of drugs due to their recently reported anti-tumoral activity in colorectal cancer. However, despite this tremendous potential, their bioavailability at the tumor microenvironment remains rather limited. To overcome this issue, in this work we synthesized biocompatible micellar nanocarriers composed of amphiphilic chitosan to deliver ibuprofen into breast cancer cells and evaluate its anti-tumor activity, while avoiding side-effects. Our results reveal that the formulations produced herein self-assembly into spherical micelles with suitable sizes for tumor accumulation (108-252 nm). Furthermore, by using a vortex-sonication method, ibuprofen was successfully encapsulated with high efficiency. Cell uptake studies show that ibuprofen-loaded micelles are readily internalized by tumor cells and deliver their cargo in the intracellular compartment as demonstrated by confocal microscopy images. This fact led to a remarkable reduction in cancer cell viability (<13%), at a relatively low drug dosage, illustrating the anti-tumoral activity of ibuprofen when delivered to breast cancer cells. These findings demonstrate the promising potential of chitosan micelles as carriers of cost-effective NSAIDS for application in breast cancer therapy.

Evaluation of nanoparticle uptake in co-culture cancer models

Co-culture models are currently bridging the gap between classical cultures and in vivo animal models. Exploring this novel approach unlocks the possibility to mimic the tumor microenvironment in vitro, through the establishment of cancer-stroma synergistic interactions. Notably, these organotypic models offer a perfect platform for the development and pre-clinical evaluation of candidate nanocarriers loaded with anti-tumoral drugs in a high throughput screening mode, with lower costs and absence of ethical issues. However, this evaluation was until now limited to co-culture systems established with precise cell ratios, not addressing the natural cell heterogeneity commonly found in different tumors. Therefore, herein the multifunctional nanocarriers efficiency was characterized in various fibroblast-MCF-7 co-culture systems containing different cell ratios, in order to unravel key design parameters that influence nanocarrier performance and the therapeutic outcome. The successful establishment of the co-culture models was confirmed by the tissue-like distribution of the different cells in culture. Nanoparticles incubation in the various co-culture systems reveals that these nanocarriers possess targeting specificity for cancer cells, indicating their suitability for being used in this illness therapy. Additionally, by using different co-culture ratios, different nanoparticle uptake profiles were obtained. These findings are of crucial importance for the future design and optimization of new drug delivery systems, since their real targeting capacity must be addressed in heterogenous cell populations, such as those found in tumors.

Bioactive polymeric-ceramic hybrid 3D scaffold for application in bone tissue regeneration

The regeneration of large bone defects remains a challenging scenario from a therapeutic point of view. In fact, the currently available bone substitutes are often limited by poor tissue integration and severe host inflammatory responses, which eventually lead to surgical removal. In an attempt to address these issues, herein we evaluated the importance of alginate incorporation in the production of improved and tunable β-tricalcium phosphate (β-TCP) and hydroxyapatite (HA) three-dimensional (3D) porous scaffolds to be used as temporary templates for bone regeneration. Different bioceramic combinations were tested in order to investigate optimal scaffold architectures. Additionally, 3D β-TCP/HA vacuum-coated with alginate, presented improved compressive strength, fracture toughness and Young's modulus, to values similar to those of native bone. The hybrid 3D polymeric-bioceramic scaffolds also supported osteoblast adhesion, maturation and proliferation, as demonstrated by fluorescence microscopy. To the best of our knowledge this is the first time that a 3D scaffold produced with this combination of biomaterials is described. Altogether, our results emphasize that this hybrid scaffold presents promising characteristics for its future application in bone regeneration.

Biofunctionalized nanoparticles with pH-responsive and cell penetrating blocks for gene delivery

Bridging the gap between nanoparticulate delivery systems and translational gene therapy is a long sought after requirement in nanomedicine-based applications. However, recent developments regarding nanoparticle functionalization have brought forward the ability to synthesize materials with biofunctional moieties that mimic the evolved features of viral particles. Herein we report the versatile conjugation of both cell penetrating arginine and pH-responsive histidine moieties into the chitosan polymeric backbone, to improve the physicochemical characteristics of the native material. Amino acid coupling was confirmed by 2D TOCSY NMR and Fourier transform infrared spectroscopy. The synthesized chitosan-histidine-arginine (CH-H-R) polymer complexed plasmid DNA biopharmaceuticals, and spontaneously assembled into stable 105 nm nanoparticles with spherical morphology and positive surface charge. The functionalized delivery systems were efficiently internalized into the intracellular compartment, and exhibited remarkably higher transfection efficiency than unmodified chitosan without causing any cytotoxic effect. Additional findings regarding intracellular trafficking events reveal their preferential escape from degradative lysosomal pathways and nuclear localization. Overall, this assembly of nanocarriers with bioinspired moieties provides the foundations for the design of efficient and customizable materials for cancer gene therapy.