Innovative reuse of concrete slurry waste from ready-mixed concrete plants in construction products

Concrete slurry waste (CSW) is generated from ready-mixed concrete plants during concrete production and is classified as a corrosive hazardous material. If it is disposed of at landfills, it would cause detrimental effects for our surrounding environment and ecosystems due to its high pH value as well as heavy metal contamination and accumulation. A new method in this study has been introduced to effectively reuse CSW in new construction products. In this method, the calcium-silicate rich CSW in the fresh state was considered as a cementitious paste as well as a CO2 capture medium. The experimental results showed that the pH values of the collected CSWs stored for 28 days ranged from 12.5 to 13.0 and a drastic decrease of pH value was detected after accelerated mineral carbonation. The theoretically calculated CO2 sequestration extent of CSWs was from 27.05% to 31.23%. The practical water to solid ratio in the fresh CSW varied from 0.76 to 1.12, which had a significant impact on the compressive strength of the mixture with CSWs. After subjecting to accelerated mineral carbonation, rapid initial strength development and lower drying shrinkage for the prepared concrete mixture were achieved.

CO₂ carbonation under aqueous conditions using petroleum coke combustion fly ash

Fly ash from petroleum coke combustion was evaluated for CO2 capture in aqueous medium. Moreover the carbonation efficiency based on different methodologies and the kinetic parameters of the process were determined. The results show that petroleum coke fly ash achieved a CO2 capture yield of 21% at the experimental conditions of 12 g L(-1), 363°K without stirring. The carbonation efficiency by petroleum coke fly ash based on reactive calcium species was within carbonation efficiencies reported by several authors. In addition, carbonation by petroleum coke fly ash follows a pseudo-second order kinetic model.

Two-step accelerated mineral carbonation and decomposition analysis for the reduction of CO₂ emission in the eco-industrial parks

Carbon dioxide (CO₂) emissions are a leading contributor to the negative effects of global warming. Globally, research has focused on effective means of reducing and mitigating CO₂ emissions. In this study, we examined the efficacy of eco-industrial parks (EIPs) and accelerated mineral carbonation techniques in reducing CO₂ emissions in South Korea. First, we used Logarithmic Mean Divisia Index (LMDI) analysis to determine the trends in carbon production and mitigation at the existing EIPs. We found that, although CO₂ was generated as byproducts and wastes of production at these EIPs, improved energy intensity effects occurred at all EIPs, and we strongly believe that EIPs are a strong alternative to traditional industrial complexes for reducing net carbon emissions. We also examined the optimal conditions for using accelerated mineral carbonation to dispose of hazardous fly ash produced through the incineration of municipal solid wastes at these EIPs. We determined that this technique most efficiently sequestered CO₂ when micro-bubbling, low flow rate inlet gas, and ammonia additives were employed.