Characterization of herpetrione amorphous nanoparticles stabilized by hydroxypropylmethyl cellulose and its absorption mechanism in vitro

Herpetrione(HPE) is an effective compound that has been used in the treatment of liver diseases. To improve its dissolution and absorption, herpetrione nanosuspensions was prepared. Nanosuspensions were proved to achieve intact absorption in vivo. However, the transport mechanisms are not fully understood, especially lack of direct evidence of translocation of particulates. In this study, an environment-responsive dye, P4, was loaded into herpetrione amorphous nanoparticles (HPE-ANPs) to elucidate the absorption and transport mechanism of the nanoparticles. And the amount of HPE and nanoparticles in the samples were quantified using HPLC/LC-MS/MS and IVIS with the model of Caco-2 and Caco-2/HT29-MTX. Results demonstrated that HPE is mainly taken up by passive diffusion in the form of free drugs, while HPE-ANPs are internalized by an energy dependent active transport pathway or intracellular endocytosis. It is speculated that HPE-ANPs may change the original entry pathway of drug molecules. Furthermore, the presence of mucus layer and the use of HPMC E15 may contribute to drug absorption to some extent. Transcellular transport study indicates that HPE-ANPs has a poor absorption. In conclusion, the differences in the absorption behavior trends of HPE-ANPs are caused by the difference in particle properties and the form of existence of the drug.

Study on the modulating effect of halogen atom substitution on the detection range of water content detection probes in organic solvents

Fluorescence probes based on the variations of aggregation state (Aggregation-Induced Emission (AIE) and Aggregation-Caused Quenching (ACQ)) have received widespread attention due to their simplicity, efficiency and intuitiveness. However, typical probes are highly sensitive to changes in polarity and slight variations in the external environment can cause a complete change in the aggregation state. With the aim of expanding the detection range of the molecular probe, this work adopts a different design strategy from adjusting the molecular backbone but regulates the fluorescence behavior of the Schiff base molecular backbone by introducing different halogen atoms. Systematic studies show that when chlorine serves as substitutional atoms (3,5-Cl Salen), the probe can achieve full-range detection of water content (0-100 vol%) in ethanol and DMF. To our knowledge, the 3,5-Cl Salen represents the best water content probe in organic molecules. Experimental and theoretical studies have shown that the adjustment of halogen atoms can linearly change the charge distribution on the benzene ring and precisely control the strength of intermolecular interactions. At the same time, we developed a fluorescent filter paper based on 3,5-Cl Salen and used smartphones for rapid, sensitive and precise on-site measurement of water content in organic solvents.

Electrochemiluminescence enhanced by isolating ACQphores in imine-linked covalent organic framework for organophosphorus pesticide assay

Most of covalent organic frameworks (COFs) are non or weakly emissive due to either the molecular thermal motion-mediated energy dissipation or the aggregation-caused quenching (ACQ) effect. Herein, we synthesize an imine-linked COF (TFPPy-TPh-COF) with high electrochemiluminescence (ECL) emission and the capability of eliminating the ACQ effect and further construct an ECL sensor for malathion detection. The imine-linked COF is obtained by the condensation reaction of (1,1':3',1″-terphenyl)-4,4″-diamine (TPh) and 1,3,6,8-tetrakis(p-formylphenyl)pyrene (TFPPy), and it has higher ECL efficiency than TFPPy aggregates due to the separation of ACQ luminophores (i.e., TFPPy) from each other by TPh and the restriction of intramolecular motions of TFPPy and TPh to reduce the nonradiative decay. The efficient quenching of ECL is achieved by electrochemiluminescence resonance energy transfer (ERET) from the excited state of the TFPPy-TPh-COF to zeolite imidazolate framework-8 (ZIF-8) and the steric hindrance of ZIF-8. Acetylcholinesterase (AChE) can enzymatically hydrolyze acetylcholine (ACh) to generate acetic acid. The resultant acetic acid can trigger the dissolution of ZIF-8 to produce an enhanced ECL signal. Malathion as an organophosphorus pesticide serves as an AChE inhibitor to prevent the production of acetic acid, inducing the decrease of ECL signal. This sensor displays a limit of detection (LOD) of 2.44 pg/mL and a wide dynamic detection range of 0.01-1000 ng/mL. Furthermore, it can be used to detect other organophosphates pesticides (e.g., methidathion, chlorpyrifos, and paraoxon) and measure malathion in real samples (i.e., pakchoi, lettuce, and apples).

The long-circulating effect of pegylated nanoparticles revisited via simultaneous monitoring of both the drug payloads and nanocarriers

The long-circulating effect is revisited by simultaneous monitoring of the drug payloads and nanocarriers following intravenous administration of doxorubicin (DOX)-loaded methoxy polyethylene glycol-polycaprolactone (mPEG-PCL) nanoparticles. Comparison of the kinetic profiles of both DOX and nanocarriers verifies the long-circulating effect, though of limited degree, as a result of pegylation. The nanocarrier profiles display fast clearance from the blood despite dense PEG decoration; DOX is cleared faster than the nanocarriers. The nanocarriers circulate longer than DOX in the blood, suggesting possible leakage of DOX from the nanocarriers. Hepatic accumulation is the highest among all organs and tissues investigated, which however is reversely proportionate to blood circulation time. Pegylation and reduction in particle size prove to extend circulation of drug nanocarriers in the blood with simultaneous decrease in uptake by various organs of the mononuclear phagocytic system. It is concluded that the long-circulating effect of mPEG-PCL nanoparticles is reconfirmed by monitoring of either DOX or the nanocarriers, but the faster clearance of DOX suggests possible leakage of a fraction of the payloads. The findings of this study are of potential translational significance in design of nanocarriers towards optimization of both therapeutic and toxic effects.

"Lighting-up" curcumin nanoparticles triggered by pH for developing improved enzyme-linked immunosorbent assay

In the field of precision medicine, the anticipated features of ideal drug delivery systems (DDS) have high drug loading capacity and effective stimuli-triggered mechanism, which are fitting well with the expected merits of signal labels for enhanced enzyme-linked immunosorbent assay (ELISA). Inspired by this, poly (diallyldimethylammonium chloride)-capped curcumin nanoparticles (PDDA@CUR NPs) with high loading capacity were synthesized as signal labels and further applied to dual-model colorimetric and fluorescence ELISA for the detection of C-reactive protein (CRP). Curcumin (CUR) was elaborately selected as report molecule similar to the roles of drugs in DDS, which dispersed in neutral water exhibits a negligible fluorescence response due to the aggregation of CUR molecules induced quenching effect, stimulated by basic water (BW, pH 12.36), the allochroic effect from colorless to orange occurred and fluorescence restored because of the keto-enol tautomerism in the molecular structure of CUR, just like lighting-up (from signal "OFF" to signal "ON"), yielded a dual-model colorimetric and fluorescent signal readout. PDDA, as a polycationic electrolyte, provided a biological platform that is capable of interacting with CRP label antibodies by virtue of its positive centers. The results show that "lighting-up" CUR NPs-based dual-modal colorimetric and fluorescent ELISA for CRP detection has the merits of easy-to-use, good enough sensitivity and reliability. And more importantly, it brings innovative ideas for the precise identification and quantification of protein biomarkers.

In vivo dissolution of poorly water-soluble drugs: Proof of concept based on fluorescence bioimaging

In vitro‒in vivo correlation (IVIVC) of solid dosage forms should be established basically between in vitro and in vivo dissolution of active pharmaceutical ingredients. Nevertheless, in vivo dissolution profiles have never been accurately portrayed. The current practice of IVIVC has to resort to in vivo absorption fractions (F_a). In this proof-of-concept study, in vivo dissolution of a model poorly water-soluble drug fenofibrate (FNB) was investigated by fluorescence bioimaging. FNB crystals were first labeled by near-infrared fluorophores with aggregation-caused quenching properties. The dyes illuminated FNB crystals but quenched immediately and absolutely once been released into aqueous media, enabling accurate monitoring of residual drug crystals. The linearity established between fluorescence and crystal concentration justified reliable quantification of FNB crystals. In vitro dissolution was first measured following pharmacopoeia monograph protocols with well-documented IVIVC. The synchronicity between fluorescence and in vitro dissolution of FNB supported using fluorescence as a measure for determination of dissolution. In vitro dissolution correlated well with in vivo dissolution, acquired by either live or ex vivo imaging. The newly established IVIVC was further validated by correlating both in vitro and in vivo dissolution with F_a obtained from pharmacokinetic data.

Gastrointestinal lipolysis and trans-epithelial transport of SMEDDS via oral route

Self-microemulsifying drug delivery systems (SMEDDSs) have recently returned to the limelight of academia and industry due to their enormous potential in oral delivery of biomacromolecules. However, information on gastrointestinal lipolysis and trans-epithelial transport of SMEDDS is rare. Aggregation-caused quenching (ACQ) fluorescent probes are utilized to visualize the in vivo behaviors of SMEDDSs, because the released probes during lipolysis are quenched upon contacting water. Two SMEDDSs composed of medium chain triglyceride and different ratios of Tween-80 and PEG-400 are set as models, meanwhile Neoral® was used as a control. The SMEDDS droplets reside in the digestive tract for as long as 24 h and obey first order kinetic law of lipolysis. The increased chain length of the triglyceride decreases the lipolysis of the SMEDDSs. Ex vivo imaging of main tissues and histological examination confirm the trans-epithelial transportation of the SMEDDS droplets. Approximately 2%-4% of the given SMEDDSs are transported via the lymph route following epithelial uptake, while liver is the main termination. Caco-2 cell lines confirm the cellular uptake and trans-epithelial transport. In conclusion, a fraction of SMEDDSs can survive the lipolysis in the gastrointestinal tract, permeate across the epithelia, translocate via the lymph, and accumulate mainly in the liver.

Carboxymethyl chitosan crosslinked ꞵ-cyclodextrin containing hydrogen bonded NC QDs nanocomposites to design fluorescence probes for manganese ion (II) sensing

The direct determination Mn²⁺ using carboxymethyl chitosan crosslinked with cyclodextrin containing hydrogen-bonded NC QDs (NC QD/CCSCD nanocomposites). The probable mechanism of the NC QD/CCSCD nanocomposites' fluorescence was quenched by Mn²⁺ could be interpreted as acyclic crown ether chelation. Mn²⁺ induced the NC QD/CCSCD clusters assembly to form large aggregates, which resulted in aggregation-caused quenching. The linear detection (I = 479.93-15.94C (R² = 0.9954)) can be established at Mn²⁺ concentrations from 0 to 21.11 × 10^-6 mol/L. Common metal ions, except iron and magnesium, showed minimal effect on detection. It could satisfy the standard range of Mn²⁺ in actual water samples. The method which using chelating assembly mechanism to build a novel sensor would provide a new model for the application of polymer materials in this field, but the precise assembly of polymer is an unsolved challenge.

Enhanced transdermal delivery of curcumin nanosuspensions: A mechanistic study based on co-localization of particle and drug signals

Nanosuspensions have received much attention in enhanced transdermal delivery. However, the corresponding mechanisms have not been clarified. In particular, whether nanosuspensions can directly penetrate across the stratum corneum (SC) and what is the transdermal route for the enhanced penetration. Therefore, curcumin (CUR) was adopted in this study as a model drug, while an aggregation-caused quenching (ACQ) probe was physically embedded in CUR nanosuspensions, i.e., the CUR hybrid nanosuspensions (CUR-HNSs), for bioimaging. The ACQ properties enable identification of intact CUR-HNSs. The co-localization of particle and CUR signals was exploited to outline the translocation profiles of intact nanosuspensions as well as the cargoes. Three sizes of CUR-HNSs are prepared, which are spherical and amorphous. CUR is poor in transdermal transport even in propylene glycol solution, which was enhanced by nanosuspensions. Although 400 nm CUR-HNSs present higher steady state flux than 140 nm and 730 nm ones, the cumulative amount of permeated CUR is yet less than 2% of the applied dose at 12 h. Co-localization of CUR and ACQ probe signals indicates that CUR-HNSs can infiltrate into the SC layer and accumulate in the hair follicles. The intact CUR-HNSs cannot enter into the skin. On the contrary, CUR molecules diffuse into the whole skin tissues following dissolution of CUR-HNSs in the SC and the hair follicles. In conclusion, nanosuspensions are advantageous for transdermal delivery of poorly permeable drugs by filtrate into the SC and accumulate in hair follicles.

Fluorescent nanoparticles with ultralow chromophore loading for long-term tumor-targeted imaging

Recently, organic dyes with aggregation-induced emission (AIE) have attracted much attention in bioimaging and diagnostics. Relatively, the application of traditional dyes has diminished because of aggregation-caused quenching (ACQ). In this work, we compare the imaging ability of nanoparticle formulations of these two kinds of dyes. Boron dipyrromethene (BODIPY) was chosen as a representative of the ACQ dyes, and an aggregation-induced emission (AIE) dye BPMT was used for comparison. BODIPY and BPMT were entrapped into PEG_5k-PLA_10k to form BODIPY-loaded NPs (BNPs) and BPMT-loaded NPs (ANPs), respectively. In vivo and ex vivo imaging demonstrated that BNP1 with ultralow BODIPY load (0.07%) can effectively accumulate in tumor tissues and enable long-term noninvasive imaging. In contrast, ANP4 with high BPMT load (1.6%) has poor bioimaging ability. In general, our work has certain reference significance for the application of ACQ dyes and AIEgens in bioimaging, diagnostics, and theranostics. STATEMENT OF SIGNIFICANCE: In this work, Boron dipyrromethene (BODIPY) was chosen as a representative of ACQ dyes. As a control, (Z)-2-(4'-(9H-carbazol-9-yl)-[1,1'-biphenyl]-4-yl)-3-(7-(4-(bis(4methoxyphenyl)amino) phenyl) benzo[c] [1,2,5] thiadiazol-4-yl) acrylonitrile (BPMT) was selected as an aggregation-induced emission (AIE) dye. BODIPY and BPMT was entrapped into PEG5k-PLA10k to form BODIPY-loaded NPs (BNPs) and BPMT-loaded NPs (ANPs), respectively. In vivo and ex vivo imaging demonstrated that BNP1 with ultralow BODIPY load (0.07%) can effectively accumulate in tumor tissues and realize long-term noninvasive imaging. The weaknesses of ACQ effect can be converted into advantages by skillful use of nanotechnology, which can not only save the cost but also realize high efficiency targeted cancer imaging.

Towards more accurate bioimaging of drug nanocarriers: turning aggregation-caused quenching into a useful tool

One of the current challenges in the monitoring of drug nanocarriers lies in the difficulties in discriminating the carrier-bound signals from the bulk signals of probes. Environment-responsive probes that enable signal switching are making steps towards a solution to this problem. Aggregation-caused quenching (ACQ), a phenomenon generally regarded as unfavorable in bioimaging, has turned out to be a promising characteristic for achieving environment-responsiveness and eliminating free-probe interference. So-called ACQ probes emit fluorescence when dispersed molecularly within the carrier matrix but quench immediately and absolutely once they are released into the ambient aqueous environment upon the degradation of the nanocarriers. Therefore, the fluorescence observed represents integral nanocarriers. Based on this rationale, the in vivo fates of various nanocarriers have been explored using live imaging equipment, with very interesting findings revealing the role of the particles. The current applications are however restricted to nanocarriers with highly hydrophobic matrices (lipid or polyester nanoparticles) or with a hydrophobic core-hydrophilic shell structure (micelles). The ACQ-based bioimaging strategy is emerging as a promising tool to achieve more accurate bioimaging of drug nanocarriers. This review article provides an overview of the ACQ phenomenon and the rationale for and examples of applications, as well as the limitations of the ACQ-based strategy, with a focus on improving the accuracy of bioimaging of nanoparticles.

Tracking translocation of self-discriminating curcumin hybrid nanocrystals following intravenous delivery

Nanocrystals hold great potential as parenteral delivery carrier systems for poorly water-soluble drugs. Elucidation of the in vivo fate of parenteral nanocrystals is of pharmacological, toxicological and mechanistic significance. However, it is of tremendous difficulty to monitor real-time translocation of nanocrystals in vivo owing to progressive dissolution of nanocrystals and a lack of workable tools to probe nanocrystals. In this study, self-discriminating hybrid nanocrystals (SDHNs) of a model drug curcumin (CUR) were developed by embedding traces of environment-responsive fluorescent dyes into the crystalline lattices of CUR. The SDHNs glow, but the released dyes aggregate and quench spontaneously due to the aggregation-caused quenching (ACQ) effect. Following intravenous administration into rats, a large fraction of CUR nanocrystals are cleared from blood rapidly and accumulate mainly in liver and lung. A small fraction circulate in blood for at least 48 h. Long circulating might be attributable to the surface coating with poloxamer 188, a stabilizer used during preparation; nevertheless, the ultimate fate of nanocrystals ends in reticulo-endothelial organs and tissues. It is implied that parenteral delivery provide sustained release and prolonged pharmacological efficacy, but concomitantly raise concerns of local toxicity in vital organs and tissues, especially when the active ingredients are highly toxic.