Isolation and differential structure characteristics of calcium-binding peptides derived from Pacific cod bones by hydroxyapatite affinity

Calcium-chelating peptides were found in Pacific cod bone, but their binding structure and properties have not been elucidated. Novel calcium-binding peptides were isolated by hydroxyapatite affinity chromatography (HAC), and their binding structure and properties were investigated by isothermal titration calorimetry (ITC), multispectral techniques, and mass spectrometry. Based on multiple purifications, the calcium binding capacity (CBC) of Pacific cod bone peptides (PBPs) was increased from 1.71 ± 0.15 μg/mg to 7.94 ± 1.56 μg/mg. Peptides with a molecular weight of 1-2 kDa are closely correlated with CBC. After binding to calcium, the secondary structure of peptides transitioned from random coil to β-sheet, resulting in a loose and porous microstructure. Hydrogen bonds, electrostatic interaction, and hydrophobic interaction contribute to the formation of peptide‑calcium complexes. The F21 contained 42 peptides, with repeated "GE" motif. Differential structure analysis provides a theoretical basis for the targeted preparation of high CBC peptides.

An investigation of methods to enhance adhesion of conductive layer and dielectric substrate for additive manufacturing of electronics

Additive manufacturing of conductive layers on a dielectric substrate has garnered significant interest due to its promise to produce printed electronics efficiently and its capability to print on curved substrates. A considerable challenge encountered is the conductive layer's potential peeling due to inadequate adhesion with the dielectric substrate, which compromises the durability and functionality of the electronics. This study strives to facilitate the binding force through dielectric substrate surface modification using concentrated sulfuric acid and ultraviolet (UV) laser treatment. First, polyetheretherketone (PEEK) and nanoparticle silver ink were employed as the studied material. Second, the surface treatment of PEEK substrates was conducted across six levels of sulfuric acid exposure time and eight levels of UV laser scanning velocity. Then, responses such as surface morphology, roughness, elemental composition, chemical bonding characteristics, water contact angle, and surface free energy (SFE) were assessed to understand the effects of these treatments. Finally, the nanoparticle silver ink layer was deposited on the PEEK surface, and the adhesion force measured using a pull-off adhesion tester. Results unveiled a binding force of 0.37 MPa on unmodified surface, which escalated to 1.99 MPa with sulfuric acid treatment and 2.21 MPa with UV laser treatment. Additionally, cross-approach treatment investigations revealed that application sequence significantly impacts results, increasing binding force to 2.77 MPa. The analysis further delves into the influence mechanism of the surface modification on the binding force, elucidating that UV laser and sulfuric acid surface treatment methods hold substantial promise for enhancing the binding force between heterogeneous materials in the additive manufacturing of electronics.

Effects of exogenous proteins on enzyme desizing of starch and its mechanism

Added protein to starch has abundantly applied to size the yarns. However, scarce information is available about the impact of proteins on the enzyme desizing of starch. Thus, the objective of this study was to explore the effect of corn gluten, soybean protein and bone glue on enzyme desizing and reveal the interference mechanism. The desizing efficiency of starch was detected after added proteins. The contact angle, swelling ability, protein content and structure of starch adhesion on desized yarn were measured to analyze the effect of protein on desizing. In addition, the binding forces between protein and starch were detected, and the inhibition mechanism was analyzed. Experimental results showed that desizing efficiencies of starch were decreased after adding the protein. Corn gluten had the strongest influence in hindering desizing due to the weakest promotion in the swelling of film and the stronger binding force between protein and starch, mainly through hydrophobic interaction and hydrogen bond. Improving the swelling ability of film and inhibiting the binding between starch and protein may be feasible ways to reduce the inhibition of protein on desizing.

Nanonewton scale adhesion force measurements on biotinylated microbeads with a robotic micropipette

Binding force between biomolecules has a crucial role in most biological processes. Receptor-ligand interactions transmit physical forces and signals simultaneously. Previously, we employed a robotic micropipette both in live cell and microbead adhesion studies to explore the adhesion force of biomolecules such as cell surface receptors including specific integrins on immune cells. Here we apply standard computational fluid dynamics simulations to reveal the detailed physical background of the flow generated by the micropipette when probing microbead adhesion on functionalized surfaces. Measuring the aspiration pressure needed to pick up the biotinylated 10 μm beads on avidin coated surfaces and converting it to a hydrodynamic lifting force on the basis of simulations, we found an unbinding force of 12 ± 2 nN, when targeting the beads manually; robotic targeting resulted in 9 ± 4 nN (mean ± SD). We measured and simulated the effect of the targeting offset, when the microbead was out of the axis (off-axis)of the micropipette. According to the simulations, the higher offset resulted in a higher lifting force acting on the bead. Considering this effect, we could readily correct the impact of the targeting offset to renormalize the experimental data. Horizontal force and torque also appeared in simulations in case of a targeting offset. Surprisingly, simulations show that the lifting force acting on the bead reaches a maximum at a flow rate of ~ 5 μl/s if the targeting offset is not very high (<5 μm). Further increasing the flow rate decreases the lifting force. We attribute this effect to the spherical geometry of the bead. We predict that higher flow rates cannot increase the hydrodynamic lifting force acting on the precisely targeted microbead, setting a fundamental force limit (16 nN in our setup) for manipulating microbeads with a micropipette perpendicular to the supporting surface. In order to extend the force range, we propose the offset targeting of microbeads.

Study on the interaction between typical phthalic acid esters (PAEs) and human haemoglobin (hHb) by molecular docking

This work has evaluated the binding force between hHb and typcial PAEs (DMP, DEP, DPRP, DBP, DIBP, DHP and DPHP) using molecule docking technique. The DPHP with 3 aromatic rings has the strongest binding (-ΔG_binding: 6.0kcalmol^-1) than other PAEs (-ΔG_binding: 2.91∼4.48kcalmol^-1). The DMP with the lowest molecular weight has a high binding force (-ΔG_binding: 4.48kcalmol^-1), while the DHP with the highest molecular weight has the lowest binding force (-ΔG_binding: 2.91kcalmol^-1). When the length of side chain increases, the binding force trend to decrease, regarding the VDW forces and H-bonding. The lgK_ow-ΔG_binding plotting figure shows that a higher K_ow value is accompanied by a lower binding force. The aromatic ring existed in PAEs largely increases the binding force between the hHb and the PAEs. On the other hand, the PAEs with higher number of carbon, meaning a higher hydrophobicity, can enter into the hydrophobic space of hHb centre deeper and bond to different position. The aromatic ring decreases the depth of binding position in the hydrophobic space. This work provides basic data and a theoretical method to assess the transport and accumulation of PAEs in human body, and the cytotoxicity of PAEs to hBRCs.

Adsorption and desorption of SO2, NO and chlorobenzene on activated carbon

Activated carbon (AC) is very effective for multi-pollutant removal; however, the complicated components in flue gas can influence each other's adsorption. A series of adsorption experiments for multicomponents, including SO2, NO, chlorobenzene and H2O, on AC were performed in a fixed-bed reactor. For single-component adsorption, the adsorption amount for chlorobenzene was larger than for SO2 and NO on the AC. In the multi-component atmosphere, the adsorption amount decreased by 27.6% for chlorobenzene and decreased by 95.6% for NO, whereas it increased by a factor of two for SO2, demonstrating that a complex atmosphere is unfavorable for chlorobenzene adsorption and inhibits NO adsorption. In contrast, it is very beneficial for SO2 adsorption. The temperature-programmed desorption (TPD) results indicated that the binding strength between the gas adsorbates and the AC follows the order of SO2>chlorobenzene > NO. The adsorption amount is independent of the binding strength. The presence of H2O enhanced the component effects, while it weakened the binding force between the gas adsorbates and the AC. AC oxygen functional groups were analyzed using TPD and X-ray photoelectron spectroscopy (XPS) measurements. The results reveal the reason why the chlorobenzene adsorption is less affected by the presence of other components. Lactone groups partly transform into carbonyl and quinone groups after chlorobenzene desorption. The chlorobenzene adsorption increases the number of C=O groups, which explains the positive effect of chlorobenzene on SO2 adsorption and the strong NO adsorption.