Prevalence of temporomandibular disorders diagnosis in patients treated with Herbst appliance: a systematic review and meta-analysis

BACKGROUND

The Herbst appliance is an excellent therapy for treating class II malocclusions with increased overjet. Its mechanics involve propelling the mandibular bone using two pistons the patient cannot remove. The so-called bite-jumping keeps the mandible in a more anterior position for a variable period, usually at least 6 months. This appliance does not inhibit joint functions and movements, although there are scientific papers in the literature investigating whether this appliance can lead to temporomandibular disorders. This systematic review aims to evaluate whether Herbst's device can cause temporomandibular diseases by assessing the presence of TMD in patients before and after treatment.

METHODS

A literature search up to 3 May 2023 was carried out on three online databases: PubMed, Scopus and Web of Science. Only studies that evaluated patients with Helkimo scores and Manual functional analysis were considered, as studies that assessed the difference in TMD before and after Herbst therapy. Review Manager version 5.2.8 (Cochrane Collaboration) was used for the pooled analysis. We measured the odds ratio (OR) between the two groups (pre and post-Herbst).

RESULTS

The included papers in this review were 60. Fifty-seven were excluded. In addition, a manual search was performed. After the search phase, four articles were considered in the study, one of which was found through a manual search. The overall effect showed that there was no difference in TMD prevalence between pre-Herbst and post-Herbst therapy (OR 0.74; 95% CI: 0.33-1.68).

CONCLUSION

Herbst appliance seems not to lead to an increase in the incidence of TMD in treated patients; on the contrary, it appears to decrease it. Further studies are needed to assess the possible influence of Herbst on TMDs.

Skeletal and dentoalveolar changes after total maxillary arch distalization using the casted palatal plate vs. buccal miniscrews: A randomized clinical trial

OBJECTIVES

To evaluate treatment changes after total maxillary arch distalization using the casted palatal plate compared with buccal miniscrews.

MATERIAL AND METHODS

This was a randomized, parallel, two-arm, single center trial. Participants were young adults with class II dental relationships and normal or horizontal growth patterns. The patients were treated with total distalization of the maxillary arch and were randomly allocated, according to the anchorage devices, between the plate group and the minivis group. The primary outcomes were sagittal, vertical and angular changes of molars and incisors, while the secondary outcomes were skeletal and soft tissue changes. Outcomes were evaluated on lateral cephalograms and blinding of outcome assessment was implemented. A multivariate analysis of Variance (MANOVA) tests were used and Bonferroni correction for multiple comparisons with P<0.001.

RESULTS

Forty patients (33 females and 7 males; mean age 20±3.1 years) where enrolled. A significant distalization of U6 was observed in both groups (4.33mm in the plate group and 1.88mm in the miniscrews group). It was combined with significant intrusion and non-significant distal tipping of the U6 in the plate group (1.85mm and 3.10°, respectively), while intrusion and distal tipping were non-significant in the miniscrew group (0.8mm and 2°, respectively). Both groups showed significant retraction and palatal inclination without vertical changes of U1. Only the plate group produced significant reduction of ANB and Wits. Upper and lower lips were retracted and the nasolabial angle increased significantly in both groups. There was no significant main effect of the appliance type on the comparison of treatment effects between the two groups (P=0.623). However, univariate comparisons showed that the plaque group showed greater distalization of the U6 (P<0.001).

CONCLUSIONS

Both the casted palatal plate and buccal miniscrews can be viable devices for total distalization of the maxillary arch in the treatment of class II patients. The casted plate may be considered when more extensive distalization is required.

Total arch maxillary distalization using infrazygomatic crest miniscrews in the treatment of Class II malocclusion: a prospective study

OBJECTIVES

To evaluate treatment effects in Class II patients using infrazygomatic crest (IZC) miniscrews (MS).

MATERIALS AND METHODS

A prospective sample of 25 adolescents (14 females and 11 males; mean age: 13.6 ± 1.5 years) who underwent maxillary dentition distalization treatment with IZC MSs were recruited. Lateral cephalograms and digital models at the beginning of treatment (T1) and after Class II molar correction (T2) were obtained. To compare cephalometric and digital model changes, paired t-test and Wilcoxon test were used. A significance level of 5% was used.

RESULTS

All patients achieved Class II molar correction over a mean period of 7.7 ± 2.5 months. The IZC MS therapy provided 4 mm of distalization; there was 1.2 mm of intrusion of the first molar with 11.2° distal tipping. The maxillary incisors were retracted 4.7 mm and tipped lingually 13.4°. Overjet and overbite showed a reduction of 3.6 mm and 2.4 mm, respectively. The occlusal plane rotated clockwise 2.8°. The upper lip was retracted by 1 mm and the nasolabial angle increased 5.1°. There was an increase in the interpremolar and intermolar distances.

CONCLUSIONS

Total arch distalization of the maxillary dentition using IZC MS was effective in the treatment of Class II malocclusions.

The efficiency of mandibular mini-implants in reducing adverse effects of class II elastics in adolescent female patients: a single blinded, randomized controlled trial

BACKGROUND

Excessive proclination of lower incisors and other undesirable consequences usually result from the use of class II elastics during orthodontic treatment. The purpose of this study was to attempt to limit the adverse effects of class II elastics by the use of mini implants placed in the mandibular arch in adolescent class II female patients.

METHODS

The sample comprised 28 patients, (a mean age of 15.66 ± 2 years for intervention group and 15.1 ± 2.2 years for conventional group) with one-fourth or one-half unit class II canine relationship. The sample was divided into two equal groups. Randomization was carried out by a computer sequence generator with a 1:1 allocation ratio. In the intervention group, the mini implants were inserted between the lower second premolar and first molar, while the conventional group underwent regular class II elastics therapy. The active elastics treatment time was 8 months for both groups. Results were assessed by measurements from pre- and post-elastics lateral cephalometric radiographs.

RESULTS

The change in L1 inclination (0.97 ± 0.92°) and L1 AP position (0.31 ± 0.63 mm) did not show a statistically significant difference between the two groups, but a statistically significant difference was found in the U1 retroclination (5.23 ± 1.92°) and U1 distal movement (4.05 ± 1.4 mm) [P ˂ 0.001] and [P ˂ 0.05] respectively in favor of the intervention group.

CONCLUSION

Mini-implants in conjunction with class II elastics had no skeletal effect, mainly dentoalveolar and it did not prevent the proclination of lower incisors. There was more distal movement in the upper incisors in the skeletal anchorage group which helped in enhancing the camouflaging of class II malocclusion.

TRIAL REGISTRATION

Trial registered "FUE.REC (10)/10-2018" at the FUE registration council for clinical trials/IOP Orthodontic Program October 2018.

Treatment effects of Carriere Motion Appliance on patients with class II malocclusion: A systematic review and meta-analysis

OBJECTIVE

To investigate the treatment effects of Carriere Motion Appliance (CMA) on class II patients.

METHODS

A comprehensive electronic search was performed in PubMed, Scopus, Web of science, ScienceDirect, ProQuest (dissertation and thesis), Google Scholar and ClinicalTrials.gov. All types of clinical trials that contained at least pre- and post-treatment measures of patients treated by CMA were included in this systematic review and meta-analysis. The risk of bias was assessed for all included studies. The considered outcomes were the skeletal, dento-alveolar, soft tissues, temporomandibular joint and airway changes, electromyographic activity and stability.

RESULTS

Sixteen studies were included in this systematic review and meta-analysis. The absence of randomized controlled trials which could induce confounding and selection of participant bias is considered the main risk of bias affecting the available studies. Regarding the skeletal changes, no significant effects were appreciated (changes in SNB angle; SMD=-0.13; 95% CI (-0.57, 0.31); P=0.58. Changes in SN-MP; SMD=-0.11; 95% CI (-0.54, 0.33); P=0.64). With respect to the dento-alveolar changes, an increased lower incisor's proclination (L1-MP) was observed; SMD=-0.69; 95% CI (-1.14, -0.24); P=0.003. CMA caused an increase in the airway volume, an increase in the masseter and temporalis muscles activities and a minor relapse of malocclusion after 4-years of follow-up. The results should be taken with caution because only secondary level of evidence was found.

CONCLUSIONS

The CMA used for the treatment of class II malocclusion did not cause skeletal changes; however, largely dento-alveolar effects were noticed. Prospective randomized clinical trials are highly recommended.

Treatment effects of the Carriere® Motion 3D™ appliance for the correction of Class II malocclusion in adolescents

OBJECTIVES

To determine the treatment effects produced in Class II patients by the Carriere^® Motion 3D™ appliance (CMA) followed by full fixed appliances (FFA).

MATERIALS AND METHODS

This retrospective study evaluated 34 adolescents at three time points: T1 (pretreatment), T2 (removal of CMA), and T3 (posttreatment). The comparison group comprised 22 untreated Class II subjects analyzed at T1 and T3. Serial cephalograms were traced and digitized, and 12 skeletal and 6 dentoalveolar measures were compared.

RESULTS

Phase I with CMA lasted 5.2 ± 2.8 months; phase II with FFA lasted 13.0 ± 4.2 months. CMA treatment restricted the forward movement of the maxilla at point A. There was minimal effect on the sagittal position of the chin at pogonion. The Wits appraisal improved toward Class I by 2.1 mm during the CMA phase but not during FFA. Lower anterior facial height increased twice as much in the treatment group as in controls. A clockwise rotation (3.9°) of the functional occlusal plane in the treatment group occurred during phase I; a substantial rebound (-3.6°) occurred during phase II. Overjet and overbite improved during treatment, as did molar relationship; the lower incisors proclined (4.2°).

CONCLUSIONS

The CMA appliance is an efficient and effective way of correcting Class II malocclusion. The changes were mainly dentoalveolar in nature, but some skeletal changes also occurred, particularly in the sagittal position of the maxilla and in the vertical dimension.

Long-term effects of Class II orthodontic treatment on oral health

AIM

To investigate the long-term (≥15 years) benefit of orthodontic Class II treatment (Tx) on oral health (OH).

SUBJECTS AND METHODS

All patients (Department of Orthodontics, University of Giessen, Giessen, Germany) who underwent Class II correction (Herbst-multibracket Tx, end of active Tx ≥ 15 years ago) and agreed to participate in a recall (clinical examination, interview, impressions, and photographs) were included. Records after active Tx were used to assess the long-term OH effects. Data were compared to corresponding population-representative age-cohorts as well as to untreated Class I controls without orthodontic Tx need during adolescence.

RESULTS

Of 152 treated Class II patients, 75 could be located and agreed to participate at 33.7 ± 3.0 years of age (pre-Tx age: 14.0 ± 2.7 years). The majority (70.8%) were fully satisfied with their teeth and with their masticatory system. The Decayed, Missing, Filled Teeth Index (DMFT) was 7.1 ± 4.8 and, thus, almost identical to that of the untreated Class I controls (7.9 ± 3.6). In contrast, the DMFT in the population-representative age-cohort was 56% higher. The determined mean Community Periodontal Index (CPI) maximum score (1.6 ± 0.6) was also comparable to the untreated Class I controls (1.7 ± 0.9) but in the corresponding population-representative age-cohort it was 19-44% higher. The extent of lower incisor gingival recessions did not differ significantly between the treated Class II participants and the untreated Class I controls (0.1 ± 0.2 vs. 0.0 ± 0.1 mm).

CONCLUSION

Patients with orthodontically treated severe Class II malocclusions had a lower risk for oral health impairment than the general population. The risk corresponded to that of untreated Class I controls (without orthodontic Tx need during adolescence).

Class II Young Adult Treatment with Twin Force Bite Corrector: 10-Year Follow-up

One of the most preferred compliance free fixed functional appliances in nongrowing patients is Twin Force Bite corrector (TFBC). The aim of this case report is to evaluate the effectiveness of TFBC in the treatment of an adult Class II case. A 16-year 1-month-old boy having skeletal and dental Class II relationship was selected. Roth 0.018 × 0.025 inch slots brackets were attached; a fixed lingual arch in the mandibular dental arch and a Nance appliance in the maxillary dental arch were used to increase anchorage. The TFBC therapy used for sagittal activation and stimulation of forward mandibular growth lasted for 3 months. The post-TFBC treatment lasted 6 months and the total treatment time was 9 months. Treatment of a young adult Class II malocclusion with TFBC resulted in a Class I molar occlusion, an ideal overjet, overbite, and incisor angulation in a short time and maintained in the 10-year follow-up.

Twin Block appliance with acrylic capping does not have a significant inhibitory effect on lower incisor proclination

OBJECTIVE

To investigate the effect of acrylic capping, treatment duration, overjet, and lower incisor inclination on the posttreatment tooth position in patients treated with 2 Twin Block (TB) appliance versions.

MATERIALS AND METHODS

Cephalograms of 56 patients with Class II malocclusion (21 boys, 35 girls; mean age before treatment [T1] = 12.5 years; standard deviation, 0.7) treated with a TB appliance with either acrylic capping or ball-ended clasps on lower incisors were retrospectively collected and traced. Lower incisor inclination (L1-GoGn, L1-GoMe, L1-MP) was measured at T1 and after TB appliance removal (T2). Regression analysis was performed to evaluate the effect on the lower incisor inclination of appliance type, overjet, lower incisor inclination at T1, and treatment duration after adjusting for baseline measurements.

RESULTS

Appliance design was not a significant predictor for either incisor inclination measurement (P< .05). Pretreatment lower incisor inclination was the only factor significantly associated with final tooth inclination (L1-GoGn: β = 0.57, 95% confidence interval [CI] = 0.30, 0.84, P < .001; L1-GoMe: β = 0.56, 95% CI = 0.28, 0.84, P < .001; L1-MP: β = 0.46, 95% CI = 0.17, 0.75, P = .003). There was weak evidence that treatment duration excluding L1-MP (95% CI = -1.85, -0.02; P = .045) and overjet might be associated with inclination of lower incisors at T2.

CONCLUSIONS

TB appliance design with acrylic capping on lower incisors appears not to significantly control incisor proclination. Pretreatment lower incisor inclination may be significantly associated with tooth inclination after active TB treatment and should be considered in treatment planning.

A retrospective cephalometric study on pharyngeal airway space changes after rapid palatal expansion and Herbst appliance with or without skeletal anchorage

Background

The aim of this study is to investigate the pharyngeal airway space changes in patients treated with rapid palatal expansion (RPE) and Herbst appliance with or without skeletal anchorage.

Methods

A 40-patient study group treated with the Herbst RME combination was included; moreover, a comparison between two subgroups based on whether miniscrews were used was evaluated. A subgroup 1 included 20 patients who were treated with RPE and an acrylic splint Herbst with miniscrews, and subgroup 2 included 20 patients who were treated with RPE and an acrylic splint Herbst. A cephalometric analysis was performed before (T1) and after (T2) treatment. The skeletal parameters of the sagittal occlusion analysis of Pancherz were utilized together with some extra measurements to evaluate the airways.

Results

An increased nasopharyngeal airway space was observed in group 1 (p < 0.05) from T1 to T2. Furthermore, the increase in nasopharyngeal airway space was significantly higher in subgroup 1 (p < 0.05) in comparison to the subgroup 2. Oropharyngeal (OA) and laryngopharyngeal (LA) dimensions were significantly increased in the subgroup 1 at the end of the treatment. In the subgroup 1, a significant decrease in SNA, a significant increase in SNB, and a significant decrease in ANB were observed from T1 to T2. In the subgroup 2, the treatment resulted in a significant decrease in ANB. In both groups, Pogonion increased significantly from T1 to T2.

Conclusions

The results suggest that the RPE and the Herbst appliance allow a slight improvement of the sagittal dimensions of the airways. The oropharyngeal dimension increased significantly more in the skeletal anchorage group.

Treatment and posttreatment effects induced by the Forsus appliance: A controlled clinical study

OBJECTIVE

To evaluate treatment and posttreatment dentoskeletal effects induced by the Forsus device (FRD) in growing patients with Class II malocclusion in a retrospective controlled clinical study.

MATERIALS AND METHODS

Thirty-six Class II patients (mean [SD] age 12.3 [1.2] years) were treated consecutively with the FRD protocol and compared with a sample of 20 subjects with untreated Class II malocclusion (mean [SD] age 12.2 [0.9] years). Lateral cephalograms were taken at the beginning of treatment, at the end of comprehensive treatment (after 2.3 ± 0.4 years), and at a postretention period (after 2.3 ± 1.1 years from the end of comprehensive treatment). Statistical comparisons were carried out with the unpaired t-test and Benjamini-Hochberg correction (P < .05).

RESULTS

After comprehensive treatment, the FRD sample showed a significant restriction of the sagittal maxillary growth together with a significant correction in overjet, overbite, and molar relationship. During the overall observation interval, the FRD group exhibited no significant sagittal or vertical skeletal changes, while significant improvements were recorded in overjet (-3.8 mm), overbite (-1.5 mm), and molar relationship (+3.7 mm).

CONCLUSION

The FRD protocol was effective in correcting Class II malocclusion mainly at the dentoalveolar level when evaluated 2 years after the end of comprehensive treatment.