Effects of coal blending in electrostatic precipitation efficiency-Inner Mongolia, China

Based on this study, the Al₂O₃ content of Jungar coal ash is over 45%, and the resistivity of high-Al₂O₃ ash in Jungar reaches up to 10¹² Ω​·cm. These results seriously influenced the electric characteristics of fly ash, and the collection efficiency of electrostatic precipitators (ESPs) evidently decreased. To facilitate the effective collection of fine particle in the flue gas generated before and after coal blending via ESP, the fly ash obtained from a power plant electrostatic precipitation was analyzed in terms of resistivity, size distribution, and cohesive force through a portable dust electrical resistivity test instrument, Bahco centrifuge, and a cohesive force test apparatus invented by the researchers. The mixed ratio of else coal is higher than 50%, the resistivity of the fly ash in the flue gas was lowered to approximately two orders of magnitude, and the size distribution showed an evident decrease in the PM2.5 and PM10 content in fly ash. In addition, the adhesive force and efficiency increase from 95.9 to 99.5% in the electrostatic precipitation. Therefore, the combustion of blending coal is an effective approach to improve the efficiency of ESP used to collect high-Al₂O₃ fly ash.

Mechanical and cell-to-cell adhesive properties of aggregated Methanosarcina

The mechanical and adhesive properties as well as the turgor pressure of microbes play an important role in cell growth and aggregation. By applying AFM together with finite element modelling, one can determine the cell wall structural homogeneity, mechanical and cell-to-cell adhesive properties for aggregated Methanosarcina barkeri cells. This also allows a novel approach to determine in-aggregate turgor pressure determination. Analyzing the AFM force-indentation response of the aggregates under loads less than 10 nN, our study reveals structural inhomogeneity of the polymeric part of the cell wall material and suggests that the cell wall consists of two layers of methanochondroitin (external: with a thickness of 3 ± 1 nm and internal: with a thickness of 169 ± 30 nm). On average, the hyperelastic finite element model showed that the internal layer is more rigid (μ = 14 ± 4 MPa) than the external layer (μ = 2.8 ± 0.9 MPa). To determine the turgor pressure and adhesiveness of the cells, a specific mode of indentation (under a load of 45 nN), aimed towards the centre of the individual aggregate, was performed. By modelling the AFM induced decohesion of the aggregate, the turgor pressure and the cell-to-cell adhesive interface properties could be determined. On average, the turgor pressure is estimated to be 59 ± 22 kPa, the interface strength is 78 ± 12 kPa and the polymer network extensibility is 2.8 ± 0.9 nm. We predict that internal cell wall comprised highly compressed methanochondroitin chains and we are able to identify a conceptual model for stress dependent inner cell wall growth.