Poly (3, 4-propylenedioxythiophene)/Hollow carbon sphere composites supported Pt NPs to facilitate methanol oxidation reactions

Direct methanol fuel cells (DMFCs) are thought of as portable, sustainable, and non-polluting energy devices. The exploration of efficient and affordable catalysts for the methanol oxidation reaction (MOR) is significant for the industrial application of DMFCs. In this study, nitrogen-doped hollow carbon spheres (HCS) derived from polydopamine were proposed for the catalyst support for platinum nanoparticles (Pt NPs) for serving as the anode catalyst for DMFCs, and a composite support material was fabricated by in-situ oxidation of 3,4-ethylenedioxythiophene (ProDOT) with HCS to get core-shell structured poly(3,4-propylenedioxythiophene) (PProDOT)-embellished hollow carbon spheres (HCS) (PProDOT/HCS) for further improving the catalytic activity for supported catalyst. The results indicated that the platinum (Pt) on the surface of HCS was well dispersed, and the Pt became smaller and more evenly distributed with the introduction of PProDOT. Simultaneously, the Schottky junction formed between PProDOT and Pt NPs contributes to enhanced charge transfer and catalytic activity of the catalyst. Notably, the core-shell structure of the ternary catalyst, its excellent charge transfer capability, and the interaction between platinum and the support contribute to its high electrocatalytic activity. Electrochemical tests demonstrated that the PProDOT/HCS/Pt catalyst exhibited a mass activity of 1169.6 mA mg-1Pt for methanol oxidation in acidic electrolytes, surpassing the activity of the HCS/Pt catalyst (472.4 mA mg-1Pt) and commercial Pt/C (281.0 mA mg-1Pt).

Degradable silk fibroin based piezoresistive sensor for wearable biomonitoring

Degradable wearable electronics are attracting increasing attention to weaken or eliminate the negative effect of waste e-wastes and promote the development of medical implants without secondary post-treatment. Although various degradable materials have been explored for wearable electronics, the development of degradable wearable electronics with integrated characteristics of highly sensing performances and low-cost manufacture remains challenging. Herein, we developed a facile, low-cost, and environmentally friendly approach to fabricate a biocompatible and degradable silk fibroin based wearable electronics (SFWE) for on-body monitoring. A combination of rose petal templating and hollow carbon nanospheres endows as-fabricated SFWE with good sensitivity (5.63 kPa-1), a fast response time (147 ms), and stable durability (15,000 cycles). The degradable phenomenon has been observed in the solution of 1 M NaOH, confirming that silk fibroin based wearable electronics possess degradable property. Furthermore, the as-fabricated SFWE have been demonstrated that have abilities to monitor knuckle bending, muscle movement, and facial expression. This work offers an ecologically-benign and cost-effective approach to fabricate high-performance wearable electronics.

Molecularly imprinted ultrasensitive cholesterol photoelectrochemical sensor based on perfluorinated organics functionalization and hollow carbon spheres anchored organic-inorganic perovskite

In spite of organic-inorganic perovskite emerging as a novel efficient light-harvesting material owing to their superior optical properties, excitonic properties, and electrical conductivity, the related applications are severely limited for their poor stability and selectivity. Herein, we introduced hollow carbon spheres (HCSs) and 2-(perfluorohexyl) ethyl methacrylate (PFEM) based molecularly imprinted polymers (MIPs) to dual-functionalize CH3NH3PbI3. HCSs can provide perovskite load conditions, passivate perovskite defects, increase carrier transport and effectively improve its hydrophobicity. The perfluorinated organic compound based MIPs film can not only enhance the water and oxygen stability of perovskite, but also endow it specific selectivity. Moreover, it can reduce the photoexcited electron-hole pair recombination and prolong the electron lifetime. Benefiting from the synergistic sensitization of HCSs and MIPs, an ultrasensitive photoelectrochemical platform (MIPs@CH3NH3PbI3@HCSs/ITO) for cholesterol sensing was acquired with a very wide linear range of 5.0 × 10-14-5.0 × 10-8 mol/L and an extremely low detection limit of 2.39 × 10-15 mol/L. The designed PEC sensor exhibited good selectivity and stability, as well as practicality for real sample analysis. The present work extended the development of the high-performance perovskite and showed its broad application prospect for advanced PEC construction.

Adsorption properties of hollow carbon spheres to gaseous cyclohexane using DFT simulation and experiments

The cyclohexane is the common toxic volatiles emitted from the various industry in worldwide leading to environmental degradation and human illnesses. Hence, there is a requirement for an efficient and stable adsorbent for adsorbing these toxic molecules to safeguard human health and the air atmosphere. Hollow carbon spheres (HCS) are a new type of carbon nanomaterial with large specific surface area, low density, and good chemical and thermal stability. In this study, DFT simulations and static-dynamic adsorption studies of cyclohexane were carried out using HCS as the adsorbent material. Among them, static adsorption focuses on adsorption/desorption isotherm, adsorption isotherm model fitting and isosteric heat of adsorption. Dynamic adsorption was mainly studied the effect of initial concentrations, gas flow rate, and ambient temperature on adsorption performance. The results showed that HCS exhibited very good performance in cyclohexane adsorption.

A sandwich-type electrochemical immunosensor for CYFRA 21-1 based on probe-confined in PtPd/polydopamine/hollow carbon spheres coupled with dendritic Au@Rh nanocrystals

A signal-on sandwich-like electrochemical immunosensor was built for determination of cytokeratin 19 fragments 21-1 (CYFRA 21-1) in non-small cell lung cancer (NSCLC) by confining electroactive dye (e.g., methylene blue, MB) as a probe for amplifying signals. Specifically, core-shell gold@rhodium dendritic nanocrystals (Au@Rh DNCs) behaved as a substrate for primary antibody and accelerate interfacial electron transfer. Besides, hollow carbon spheres (HCSs) were subsequently modified with polydopamine (PDA) and PtPd nanoparticles for sequential integration of the secondary antibody and confinement of MB as a label, termed as MB/PtPd/PDA/HCSs for clarity. The built sensors showed a broad linear range (100 fg mL^-1 ~ 100 ng mL^-1) for detection of CYFRA 21-1 with an ultra-low detection limit (31.72 fg mL^-1, S/N = 3), coupled with satisfactory performance in human serum samples. This work can be explored for assays of other proteins and provides some constructive insights for early and accurate diagnosis of NSCLC.

Hollow carbon spheres loaded with NiSe2 nanoplates as multifunctional SeS2 hosts for Li-SeS2 batteries

Selenium sulfide as a new alternative cathode material can effectively address the inferior electronic conductivity of sulfur, which is the main cause for poor electrochemical reactivity of conventional lithium-sulfur batteries (Li-S batteries). Therefore, in this work, hollow carbon spheres loaded with NiSe₂ nanoplates were prepared as SeS₂ hosts for Li-SeS₂ batteries. The unique micro-mesoporous hollow carbon spheres not only provide channels for the diffusion of SeS₂, but also afford spaces for alleviating the volume expansion of the active substance. Besides, the external polar NiSe₂ nanoplates increase active sites for capturing polysulfides or polyselenides during the charge/discharge process. Meanwhile, the excellent electronic conductivity of NiSe₂ can accelerate the catalytic reaction on the surface, thus reducing the loss of soluble intermediate products and finally suppressing the "shuttle effect". These extraordinary features of the as-proposed cathode offer many superiorities in electrochemical performances in terms of a high initial discharge capacity of 1139 mA h g^-1 at a current rate of 0.1C and an excellent cycling life of up to 1000 cycles at 1C.