High-resolution performance of pillar[6]arene functionalized with imidazolium ionic liquids for gas chromatography

Pillar[n]arenes (P[n]A, n = 5-10) have attracted much attention because of their highly symmetric pillar-shaped architecture with π-electron rich cavity. Nevertheless, the use of ionic liquid functionalized P[n]A in chromatography has not been reported up to data. This work reports the investigation of the imidazolium ionic liquids functionalized pillar[6]arene (P6A-C10-IM-C8[NTf2]) as the stationary phase for gas chromatography (GC). The statically coated P6A-C10-IM-C8[NTf2] column (0.25 mm i.d.) showed moderate polarity and high column efficiency of 4733 plates/m determined by n-dodecane at 120 °C (k = 2.29). Owing to its unique amphiphilic conformation, the P6A-C10-IM-C8[NTf2] showed good column inertness and resolving capability for a wide range of analytes and isomers. Particularly, the P6A-C10-IM-C8[NTf2] column exhibited distinctly advantageous performance for the challenging isomers of halogenated benzenes, benzaldehydes, phenols and anilines over the common commercial columns, namely 5% phenyl methyl polysiloxane (HP-5) and 35% phenyl methyl polysiloxane (HP-35). In addition, it exhibited good column repeatability and reproducibility with RSD values on the retention times less than 0.05% for run-to-run, 0.38% for day-to-day and 2.94% for column-to-column, respectively. This work demonstrates the promising future of ionic liquid P[n]A stationary phases for chromatographic separations.

Multipurpose new gas chromatography column based on pillararenes functionalized with imidazolium ionic liquids

BACKGROUND

Gas chromatography is worldwide recognized as one of the most important analytical techniques, due to its high versatility and reliability. The heart of a gas chromatograph is the column, that allows analyte peak separations and, consequently, accurate qualitative and qualitative analyses. New and more efficient columns are always requested to satisfy new and challenging analytical needs.

RESULTS

In this work, imidazolium ionic liquids functionalized pillar [5] arenes have been used for the first time as gas chromatographic stationary phases, considering their highly symmetric pillar-shaped architecture with cavities rich in π-electrons. Four imidazolium ionic liquids functionalized pillar [5] arenes have been tested as stationary phases with numerous analytes and isomers. In particular, one of these showed superior performances if compared to commercial columns, enabling challenging isomeric separations of halogenated benzenes, aromatic aldehydes, and aromatic anilines.

SIGNIFICANCE AND NOVELTY

To our knowledge, this is the first report on the use of the ionic liquid P[n]A as a stationary phase in chromatography, either in GC or liquid chromatography (LC) separations. This work demonstrates the promising potential of ionic liquid P[n]A stationary phases for chromatographic separations.

Imidazolium ionic liquids as potential persistent pollutants in aqueous environments: Indirect photochemical degradation kinetics and mechanism

Ionic liquids (ILs) with promising application are likely to become ubiquitous contaminants in water environment for their high hydrophilicity, low biodegradability, and especially its potential toxicity. In this work, we have investigated photochemical transformation of six imidazolium ILs for fate prediction and ecological risk assessment. We found that the reaction rates of the ILs with •OH, CO₃^•─ and ¹O₂ enhanced with their increasing alkyl chain and varied slightly with the paired anions. Meanwhile, modelled results under different scenarios indicate that the primary contributors to transformation of the ILs are triplet-stated dissolved matter (³CDOM*), •OH and CO₃^•-. Besides, the overall half-lives of the ILs can reach 670 days, which indicates persistence of these ILs in the environment. Products for ILs in reaction with •OH and triplet-stated sodium anthraquinone-2-sulfonate (³AQ2S*) were probed by UHPLC-Q-TOF-MS/MS and there is a difference between their products: Products by •OH are likely formed by hydrogen abstraction from the side alkyl chain, followed by dehydrogenation, hydroxylation and carbonylation, while one of the products by ³AQ2S* is formed by dihydroxyl-addition of the imidazolium ring. Furthermore, the ILs and its products were estimated to have toxicity and non-readily biodegradability, suggesting potential eco-risk for the environmental water.

Insight into the interaction between arabinoxylan and imidazolium acetate-based ionic liquids

Herein, six ionic liquids (ILs) with different cations and the same anion of acetate (Ac^-) were used to dissolve arabinoxylan. These ILs included N-methylimidazolium acetate (HmimAc), 1-ethyl-3-methylimidazolium acetate (EmimAc), 1-hydroxyethyl-3-methylimidazolium acetate (HOemimAc), 1-propyl-3-methylimidazolium acetate (PrmimAc), 1-allyl-3-methylimidazolium acetate (AmimAc), and 1-butyl-3-methylimidazolium acetate (BmimAc). The solubilities of arabinoxylan in these ILs were determined, and the dissolution mechanism was explained using ¹H and ¹³C NMR techniques. The solubilities of arabinoxylan in the ILs were in the order: BmimAc > EmimAc > AmimAc > PrmimAc > HOemimAc > HmimAc. Both the cation and Ac^- played an important role in the solubilization of arabinoxylan, but Ac^- performed the major factor. The structure of cation greatly affected the hydrogen bond accepting ability of Ac^-. Increasing the mass ratio of arabinoxylan to ILs resulted in stronger hydrogen bond between arabinoxylan and the ILs. Both the solubility and the strength of hydrogen-bonding interaction between arabinoxylan and the ILs decreased in the recycled ILs because of the impurities remained.

Determining mushroom tyrosinase inhibition by imidazolium ionic liquids: A spectroscopic and molecular docking study

The inhibition effects of imidazolium ionic liquids (ILs) on the enzyme kinetics of mushroom tyrosinase is reported. A simple UV-VIS spectrophotometric assay was used to measure the reaction kinetics of the reaction between mushroom tyrosinase and L-dopa. Seven different imidazolium ILs, comprised of 1-alkyl-3-methylimidazolium ([Im_n1⁺], n=2, 4, 6) cations paired with several anions that included Cl^-, [NO₃^-], methanesulfonate ([MeSO₃^-]), trifluoromethanesulfonate (or triflate, [TFMS^-]), and bis(trifluoromethylsulfonyl)imide ([Tf₂N^-]). Lineweaver-Burk plots were generated from the recovered k_cat and K_m parameters using four to six substrate concentrations per measurement. The results show that mushroom tyrosinase activity was consistently inhibited by all of the ILs and that the type of inhibition was non-competitive in nearly all cases. Only the data for [Im₂₁⁺][Tf₂N^-] suggested that the inhibition mechanism was competitive with the substrate. Molecular docking simulations were performed using AutoDock4.2 and AutoDock Vina and revealed that all cations docked in the L-dopa active site. Anions showed varied results that included locations both within and outside of the active site.

Mechanistic insights into the effect of imidazolium ionic liquid on lipid production by Geotrichum fermentans

BACKGROUND

Ionic liquid (IL) pretreatment has emerged as a promising technique that enables complete utilization of lignocellulosic biomass for biofuel production. However, imidazolium IL has recently been shown to exhibit inhibitory effect on cell growth and product formation of industrial microbes, such as oleaginous microorganisms. To date, the mechanism of this inhibition remains largely unknown.

RESULTS

In this study, the feasibility of [Bmim][OAc]-pretreated rice straw hydrolysate as a substrate for microbial lipid production by Geotrichum fermentans, also known as Trichosporon fermentans, was evaluated. The residual [Bmim][OAc] present in the hydrolysate caused a reduction in biomass and lipid content (43.6 and 28.1%, respectively) of G. fermentans, compared with those of the control (7.8 g/L and 52.6%, respectively). Seven imidazolium ILs, [Emim][DEP], [Emim]Cl, [Amim]Cl, [Bmim]Cl, [Bzmim]Cl, [Emim][OAc], and [Bmim][OAc], capable of efficient pretreatment of lignocellulosic biomass were tested for their effects on the cell growth and lipid accumulation of G. fermentans to better understand the impact of imidazolium IL on the lipid production. All the ILs tested inhibited the cell growth and lipid accumulation. In addition, both the cation and the anion of IL contributed to IL toxicity. The side chain of IL cations showed a clear impact on toxicity. On examining IL anions, [OAc]^- was found to be more toxic than those of [DEP]^- and Cl^-. IL exhibited its toxicity by inhibiting sugar consumption and key enzyme (malic enzyme and ATP-citrate lyase) activities of G. fermentans. Cell membrane permeability was also altered to different extents in the presence of various ILs. Scanning electron microscopy revealed that IL induces fibrous structure on the surface of G. fermentans cell, which might represent an adaptive mechanism of the yeast to IL.

CONCLUSIONS

This work gives some mechanistic insights into the impact of imidazolium IL on the cell growth and lipid accumulation of oleaginous yeast, which is important for IL integration in lignocellulosic biofuel production, especially for microbial lipid production.

Role of 1-methyl-3-octylimidazolium chloride in the micellization behavior of amphiphilic drug amitriptyline hydrochloride

The mixed micellization behaviour of amitriptyline hydrochloride (AMT) with ionic liquid (IL) 1-methyl-3-octylimidazolium hydrochloride, [C8mim][Cl], have been investigated using electrical conductivity, at different temperatures. The non-ideal behaviour (i.e., synergistic interaction) of AMT-[C8mim][Cl] binary mixtures, explained by the deviations in critical micelle concentration (cmc) from ideal critical micelle concentration (cmc*) and micellar mole fraction (X(m)) from ideal micellar mole fraction (X(ideal)) values. The values of interaction parameter (β) and activity coefficients (f1 and f2), also confirm the synergistic interaction. The excess free energy (ΔGex) for the AMT-[C8mim][Cl] binary mixtures explains, stability of mixed micelles in comparison to micelles of pure, AMT and [C8mim][Cl]. The calculated thermodynamic parameters (viz., the standard Gibbs energy change, ΔGm(∘), the standard enthalpy change, ΔHm(∘), the standard entropy change, ΔSm(∘)), suggest the dehydration of hydrophobic part of the drug at higher temperatures (>313K), not only in case of AMT but also in the presence of [C8mim][Cl].