Flaring volumes in the intermountain west region: A geospatial analysis of satellite and operator-reported data with viable mitigation strategies

Burning associated gas has been a prevailing problem across the world for decades. This practice consumes billions of (US) dollars' worth of valuable natural gas, contributes billions of metric tons of carbon dioxide (CO2) to the atmosphere, and releases volatile chemicals to nearby communities. To assess the prevalence of wellbore flaring within the Intermountain West (I-West) region, we analyzed data from the Nightfire project and contrasted it with wellbore surface hole locations. Consequently, we will permit the analysis of the flare data on a geospatial scale and compare it with operator self-reported flaring volumes. Through this analysis, we found that New Mexico is by far the largest flaring state in the I-West region, with most of its flare gas coming from the Permian Basin. Additionally, we found that satellite data estimated volumes that were 165% larger than those self-reported by the operators. Although some of this could be an overestimation from the Nightfire project, the size of the discrepancy indicates that there may be an underestimation of flared volumes that operators report to the state. A better understanding of the discrepancy source can be identified by linking the satellite flare volume to individual wells and operators, and potential solutions may be implemented to assist New Mexico's recent waste laws in reducing Permian flared volumes. We also proposed economic solutions that could substantially reduce the flared volume through flare gas utilization through on-site processing, the construction of small spur lines, and the development of a local sink for methane.

Reconciling Multiple Methane Detection and Quantification Systems at Oil and Gas Tank Battery Sites

Emission rates were estimated for >100 oil and gas production sites with significant liquid-handling equipment (tank battery sites) in the Permian Basin of west Texas. Emission estimates based on equipment counts and emission factors, but not accounting for large uninventoried emission events, led to ensemble average emission rates of 1.8-3.6 kg/h per site. None of the site-specific emission estimates for individual sites, based on equipment counts, exceeded 10 kg/h. On-site drone-based emission measurements led to similar emission estimates for inventoried sources. Multiple aircraft measurement platforms were deployed and reported emissions exceeding 10 kg/h at 14-27% of the sites, and these high-emission rate sites accounted for 80-90% of total emissions for the ensemble of sites. The aircraft measurement systems were deployed asynchronously but within a 5 day period. At least half of the sites with emission rates above 10 kg/h detected by aircraft had emissions that did not persist at a level above 10 kg/h for repeat measurements, suggesting typical high-emission rate durations of a few days or less for many events. The two aircraft systems differed in their estimates of total emissions from the ensembles of sites sampled by more than a factor of 2; however, the normalized distributions of emissions for sites with emission rates of >10 kg/h were comparable for the two aircraft-based methods. The differences between the two aircraft-based platforms are attributed to a combination of factors; however, both aircraft-based emission measurement systems attribute a large fraction of emissions to sites with an emission rate of >10 kg/h.

The Microbial Community and Functional Potential in the Midland Basin Reveal a Community Dominated by Both Thiosulfate and Sulfate-Reducing Microorganisms

The Permian Basin is the highest producing oil and gas reservoir in the United States. Hydrocarbon resources in this region are often accessed by unconventional extraction methods, including horizontal drilling and hydraulic fracturing. Despite the importance of the Permian Basin, there is no publicly available microbiological data from this region. We completed an analysis of Permian produced water samples to understand the dynamics present in hydraulically fractured wells in this region. We analyzed produced water samples taken from 10 wells in the Permian region of the Midland Basin using geochemical measurements, 16S rRNA gene sequencing, and metagenomic sequencing. Compared to other regions, we found that Permian Basin produced water was characterized by higher sulfate and lower total dissolved solids (TDS) concentrations, with a median of 1,110 mg/L and 107,000 mg/L. Additionally, geochemical measurements revealed the presence of frac hits, or interwell communication events where an established well is affected by the pumping of fracturing fluid into a new well. The occurrence of frac hits was supported by correlations between the microbiome and the geochemical parameters. Our 16S rRNA gene sequencing identified a produced water microbiome characterized by anaerobic, halophilic, and sulfur reducing taxa. Interestingly, sulfate and thiosulfate reducing taxa including Halanaerobium, Orenia, Marinobacter, and Desulfohalobium were the most prevalent microbiota in most wells. We further investigated the metabolic potential of microorganisms in the Permian Basin with metagenomic sequencing. We recovered 15 metagenome assembled genomes (MAGs) from seven different samples representing 6 unique well sites. These MAGs corroborated the high presence of sulfate and thiosulfate reducing genes across all wells, especially from key taxa including Halanaerobium and Orenia. The observed microbiome composition and metabolic capabilities in conjunction with the high sulfate concentrations demonstrate a high potential for hydrogen sulfide production in the Permian Basin. Additionally, evidence of frac hits suggests the possibility for the exchange of microbial cells and/or genetic information between wells. This exchange would increase the likelihood of hydrogen sulfide production and has implications for the oil and gas industry. IMPORTANCE The Permian Basin is the largest producing oil and gas region in the United States and plays a critical role supplying national energy needs. Previous work in other basins has demonstrated that the geochemistry and microbiology of hydrocarbon regions can have a major impact on well infrastructure and production. Despite that, little work has been done to understand the complex dynamics present in the Permian Basin. This study characterizes and analyzes 10 unique wells and one groundwater sample in the Permian Basin using geochemical and microbial techniques. Across all wells we found a high number of classic and thiosulfate reducers, suggesting that hydrogen sulfide production may be especially prevalent in the Permian Basin. Additionally, our analysis revealed a biogeochemical signal impacted by the presence of frac hits, or interwell communication events where an established well is affected by the pumping of fracturing fluid into a new well. This information can be utilized by the oil and gas industry to improve oil recovery efforts and minimize commercial and environmental costs.

Characterization of produced water and surrounding surface water in the Permian Basin, the United States

A thorough understanding of produced water (PW) quality is critical to advance the knowledge and tools for effective PW management, treatment, risk assessment, and feasibility for beneficial reuse outside the oil and gas industry. This study provides the first step to better understand PW quality to develop beneficial reuse programs that are protective of human health and the environment. In total, 46 PW samples from unconventional operations in the Permian Basin and ten surface water samples from the Pecos River in New Mexico were collected for quantitative target analyses of more than 300 constituents. Water quality analyses of Pecos River samples could provide context and baseline information for the potential discharge and reuse of treated PW in this area. Temporal PW and river water quality changes were monitored for eight months in 2020. PW samples had total dissolved solids (TDS) concentrations ranging from 100,800-201,500 mg/L. Various mineral salts, metals, oil and grease, volatile and semi-volatile organic compounds, radionuclides, ammonia, hydraulic fracturing additives, and per- and polyfluoroalkyl substances were detected at different concentrations. Chemical characterization of organic compounds found in Pecos River water showed no evidence of PW origin. Isometric log-ratio Na-Cl-Br analysis showed the salinity in the Pecos River samples appeared to be linked to an increase in natural shallow brine inputs. This study outlines baseline analytical information to advance PW research by describing PW and surrounding surface water quality in the Permian Basin that will assist in determining management strategies, treatment methods, potential beneficial reuse applications, and potential environmental impacts specific to intended beneficial use of treated PW.

Analysis and prediction of produced water quantity and quality in the Permian Basin using machine learning techniques

Appropriate produced water (PW) management is critical for oil and gas industry. Understanding PW quantity and quality trends for one well or all similar wells in one region would significantly assist operators, regulators, and water treatment/disposal companies in optimizing PW management. In this research, historical PW quantity and quality data in the New Mexico portion (NM) of the Permian Basin from 1995 to 2019 was collected, pre-processed, and analyzed to understand the distribution, trend and characteristics of PW production for potential beneficial use. Various machine learning algorithms were applied to predict PW quantity for different types of oil and gas wells. Both linear and non-linear regression approaches were used to conduct the analysis. The prediction results from five-fold cross-validation showed that the Random Forest Regression model reported high prediction accuracy. The AutoRegressive Integrated Moving Average model showed good results for predicting PW volume in time series. The water quality analysis results showed that the PW samples from the Delaware and Artesia Formations (mostly from conventional wells) had the highest and the lowest average total dissolved solids concentrations of 194,535 mg/L and 100,036 mg/L, respectively. This study is the first research that comprehensively analyzed and predicted PW quantity and quality in the NM-Permian Basin. The results can be used to develop a geospatial metrics analysis or facilitate system modeling to identify the potential opportunities and challenges of PW management alternatives within and outside oil and gas industry. The machine learning techniques developed in this study are generic and can be applied to other basins to predict PW quantity and quality.

Taking the pulse of aging oil wells in the Permian Basin from space

Thousands of unplugged abandoned oil wells throughout the Permian Basin - one of world's leading oil plays - have potential to create ground instability and damage the environment due to aging facilities and instances of mismanagement. Satellite radar remote sensing technologies, capable of detecting subtle surface changes over time with broad geographic coverage, are a valuable tool for monitoring the health and integrity of aging oil wells by gauging the stability of the well and its surroundings.

Projected Landscape Impacts from Oil and Gas Development Scenarios in the Permian Basin, USA

Projecting landscape impacts from energy development is essential to land management decisions. We forecast landscape alteration resulting from oil and gas well-pad construction across the economically important Permian Basin of Texas and New Mexico, USA, by projecting current landscape trends through 2050. We modeled three landscape-impact scenarios (low, medium, and high) using recent (2008-2017) trends in well-pad construction and energy production. The results of low-, medium-, and high-impact scenarios suggest that ~60,000, ~180,000, and ~430,000 new well pads could be constructed, potentially causing ~1000, ~2800, and ~6700 km² of new direct landscape alteration. Almost two-thirds of all new well pads will be constructed within the geologic boundaries of the Delaware and Midland Basins. This translates into a 40, 120, and 300% increase in direct landscape alteration compared with direct alteration from existing well pads. We found that indirect effects (from edges) could increase by twofold, and that the ratio between indirect and direct alteration could decline by half as alteration intensifies and overlaps with existing alteration. The Chihuahuan Desert occupies the largest portion of the study area, and is projected to experience the largest area of alteration from future well-pad construction in the Permian Basin; the degree of direct alteration could increase by 70, 200, and 500% in this desert region, under low-, medium-, and high-impact scenarios. These scenarios can be used to design proactive conservation strategies to reduce landscape impacts from future oil and gas development.

Monitoring Environmental Parameters with Oil and Gas Developments in the Permian Basin, USA

This study evaluates the groundwater qualities and environmental changes to obtain information on the groundwater contamination in the Permian Basin, Texas. Coupled with the U.S. government’s open data, these analyses can identify regions where environmental change could have affected groundwater quality. A total of thirty-six wells were selected within the six counties: Andrews, Martin, Ector, Midland, Crane, and Upton. Spatial distribution maps were created for six different parameters: pH, total dissolved solids (TDS), chloride, fluoride, nitrate, and arsenic. Total groundwater quality maps incorporate all the contaminants and denote regions of poor, medium, and optimum conditions. To identify spatial changes in groundwater quality, maps were separated into two different time intervals, 1992–2005 and 2006–2019. We found that groundwater contamination resulted primarily from the mobilization of the contaminant from anthropogenic activities such as chemical fertilizers, oil and gas developments. Overall, groundwater quality decreased during the study period from 1992 to 2019 as population and urban growth began to develop in the Permian Basin. This study contributes on understanding of the response of groundwater quality associated with environmental change in the Permian Basin. Therefore, this research provides important information for groundwater managements in developing plans for the use of water resource in the future.

Temporal variation in groundwater quality in the Permian Basin of Texas, a region of increasing unconventional oil and gas development

The recent expansion of natural gas and oil extraction using unconventional oil and gas development (UD) practices such as horizontal drilling and hydraulic fracturing has raised questions about the potential for environmental impacts. Prior research has focused on evaluations of air and water quality in particular regions without explicitly considering temporal variation; thus, little is known about the potential effects of UD activity on the environment over longer periods of time. Here, we present an assessment of private well water quality in an area of increasing UD activity over a period of 13months. We analyzed samples from 42 private water wells located in three contiguous counties on the Eastern Shelf of the Permian Basin in Texas. This area has experienced a rise in UD activity in the last few years, and we analyzed samples in four separate time points to assess variation in groundwater quality over time as UD activities increased. We monitored general water quality parameters as well as several compounds used in UD activities. We found that some constituents remained stable over time, but others experienced significant variation over the period of study. Notable findings include significant changes in total organic carbon and pH along with ephemeral detections of ethanol, bromide, and dichloromethane after the initial sampling phase. These data provide insight into the potentially transient nature of compounds associated with groundwater contamination in areas experiencing UD activity.

Volatile-organic molecular characterization of shale-oil produced water from the Permian Basin

Growth in unconventional oil and gas has spurred concerns on environmental impact and interest in beneficial uses of produced water (PW), especially in arid regions such as the Permian Basin, the largest U.S. tight-oil producer. To evaluate environmental impact, treatment, and reuse potential, there is a need to characterize the compositional variability of PW. Although hydraulic fracturing has caused a significant increase in shale-oil production, there are no high-resolution organic composition data for the shale-oil PW from the Permian Basin or other shale-oil plays (Eagle Ford, Bakken, etc.). PW was collected from shale-oil wells in the Midland sub-basin of the Permian Basin. Molecular characterization was conducted using high-resolution solid phase micro extraction gas chromatography time-of-flight mass spectrometry. Approximately 1400 compounds were identified, and 327 compounds had a >70% library match. PW contained alkane, cyclohexane, cyclopentane, BTEX (benzene, toluene, ethylbenzene, and xylene), alkyl benzenes, propyl-benzene, and naphthalene. PW also contained heteroatomic compounds containing nitrogen, oxygen, and sulfur. 3D van Krevelen and double bond equivalence versus carbon number analyses were used to evaluate molecular variability. Source composition, as well as solubility, controlled the distribution of volatile compounds found in shale-oil PW. The salinity also increased with depth, ranging from 105 to 162 g/L total dissolved solids. These data fill a gap for shale-oil PW composition, the associated petroleomics plots provide a fingerprinting framework, and the results for the Permian shale-oil PW suggest that partial treatment of suspended solids and organics would support some beneficial uses such as onsite reuse and bio-energy production.