Valorization of hazardous waste cooking oil for the production of eco-friendly biodiesel using a low-cost bifunctional catalyst

Biodiesel is considered the prospective substitute for non-renewable fossil fuel-derived sources of energy. However, the high costs of feedstocks and catalysts inhibit its large-scale industrial implementation. From this perspective, the utilization of waste as the source for both catalyst synthesis and feedstock for biodiesel is a rare attempt. Waste rice husk was explored as a precursor to prepare rice husk char (RHC). Sulfonated RHC was employed as a bifunctional catalyst for the simultaneous esterification and transesterification of highly acidic waste cooking oil (WCO) to produce biodiesel. The sulfonation process coupled with ultrasonic irradiation proved to be an efficient technique to induce high acid density in the sulfonated catalyst. The prepared catalyst possessed a sulfonic density and total acid density of 4.18 and 7.58 mmol/g, respectively, and a surface area of 144 m²/g. A parametric optimization was conducted for the conversion of WCO into biodiesel using the response surface methodology. An optimal biodiesel yield of 96% was obtained under the conditions of methanol to oil ratio (13:1), reaction time (50 min), catalyst loading (3.5 wt%), and ultrasonic amplitude (56%). The prepared catalyst showed higher stability up to five cycles with biodiesel yield greater than 80%.

Valuable aramid/cellulose nanofibers derived from recycled resources for reinforcing carbon fiber/phenolic composites

The scale-up preparation of aramid nanofiber (ANF) and cellulose nanofiber (CNF), still faces serious challenges such as extreme production cost and lengthy preparation cycle. Herein, a feasible top-down strategy was proposed to achieve the efficient reclamation of waste resources, further realizing the large-scale production of high value-added nanofibers. The ANF/CNF as nanoscale building blocks and their reinforcement effects on the mechanical performances of carbon fiber/phenolic composites were investigated. Related strength and modulus of ANF/CNF-enhanced composites in the tensile, bending, shear and nano indentation tests, increased by 118.1% (tensile strength), 141.2% (tensile modulus), 142.2% (flexural strength), 354.4% (flexural modulus), 38.8% (shear strength) and 94.4% (elastic modulus), respectively. Our work offers a valuable reference in the fabrication of low-cost ANF/CNF derived from waste resources, which would facilitate the wide application of nanofibers in fabricating high-performance advanced functional materials.

Activated carbon derived from cherry flower biowaste with a self-doped heteroatom and large specific surface area for supercapacitor and sodium-ion battery applications

Herein, cherry flower waste-derived activated carbon (CFAC) with self-doped nitrogen is synthesized as a viable energy storage material for green and sustainable energy solutions. The activated carbon derived in this way is examined as an electric double-layer capacitance (EDLC)-type electrode material and sodium-ion battery (NIB) electrode material, and commendable performance is demonstrated for both of these energy storage applications. The specific surface area (SSA) and nitrogen content are observed to play a very delicate role in determining the charge storage ability of the CFAC, and the performance is optimized only by carefully balancing both of these properties. The optimized CFAC electrode supplied an excellent performance with a specific capacitance of 333.8 F g^-1 and capacity is maintained to more than 96% even after 38,000 charge-discharge cycles as an EDLC-type supercapacitor electrode material. Likewise, the CFAC/NIB also yielded remarkable performance with an average specific capacity of 150 mAh g^-1 and capacity retention of more than 84% after 200 charge-discharge cycles. Furthermore, an electrokinetic study was performed for both supercapacitor and NIB applications to identify the contribution from surface and diffusion type charge storage phenomena, consequently highlighting the role of the SSA and nitrogen content in the CFAC matrix.

Considering inorganic P binding in bio-based products improves prediction of their P fertiliser value

Prediction of the relative phosphorus (P) fertiliser value of bio-based fertiliser products is agronomically important, but previous attempts to develop prediction models have often failed due to the high chemical complexity of bio-based fertilisers and the limited number of products included in analyses. In this study, regression models for prediction were developed using independently produced data from 10 different studies on crop growth responses to P applied with bio-based fertiliser products, resulting in a dataset with 69 products. The 69 fertiliser products were organised into four sub-groups, based on the inorganic P compounds most likely to be present in each product. Within each product group, multiple regression was conducted using mineral fertiliser equivalents (MFE) as response variable and three potential explanatory variables derived from chemical analysis, all reflecting inorganic P binding in the fertiliser products: i) NaHCO₃-soluble P, ii) molar ratio of calcium (Ca):P and iii) molar ratio of aluminium + iron (Al + Fe):P. The best regression model fit was achieved for sewage sludges with Al-/Fe-bound P (n = 20; R² = 79.2%), followed by sewage sludges with Ca-bound P (n = 11; R² = 71.1%); fertiliser products with Ca-bound P (n = 29; R² = 58.2%); and thermally treated sewage sludge products (n = 9; R² = 44.9%). Even though external factors influencing P fertiliser values (e.g. fertiliser shape, application form, soil characteristics) differed between the underlying studies and were not considered, the suggested prediction models provide potential for more efficient P recycling in practice.