Autologous point-of-care stromal vascular fraction transplantation in dogs with advanced osteoarthritis of the knee and hip joints

OBJECTIVE

The aim of the study was to assess lameness in dogs with advanced osteoarthritis of the hip and knee joints after a single autologous point-of-care transplantation of the Stromal Vascular Fraction (SVF) into the affected joint.

MATERIALS AND METHODS

During a minilaparotomy, 10 g of falciform fat was removed from each patient for each joint to be treated. A modern and time-saving procedure (ARC TM System, InGeneron GmbH, Houston, USA) was used for the in-house preparation of the SVF, so that the isolated cells could be applied to the respective joint within 2 h after fat removal. In total, five knee joints of five patients and seven hip joints of four patients were treated.

RESULTS

Improvement in lameness according to owner questionnaires was seen in 3 of 5 patients with knee joint arthritis and 2 of 4 patients with hip joint arthritis. Based on gait analysis, only one dog with gonarthrosis and one dog with coxarthrosis showed improvement up to a maximum of 3 months after surgery.

CONCLUSION

This is the first case series on the treatment of osteoarthrosis of the knee or hip joint using point-of-care transplantation of the SVF. In individual cases, this method may represent a therapeutic approach for the treatment in dogs with advanced cox- or gonarthrosis, although only a short-term effect can be expected, which calls into question the effort and costs involved.

Improving the Technology of Primary Purification of the Safflower Oil Using Secondary Products of Processing on a Biological Basis

Safflower oil is a very valuable product for the body and human health. It is rich in macro- and microelements, vitamins and minerals, and also has antioxidant properties. The primary purification of safflower oil is an important stage of its production and directly affects the quality of the final product and its storage ability. Purifying safflower oil using a combination of filtration and sedimentation processes in an experimental cone-shaped centrifuge is a new direction in its processing. The purpose of this study was to determine the effects of flax fiber as a filter material for safflower oil. The Akmai variety of the safflower was tested. The results showed that the quality indicators of safflower oil before and after filtration through flax fiber are different. The amount of unsaturated fatty acids such as oleic (18.31 ± 0.874%) and cis-linoleic acid (82.52 ± 1.854%) increased, as well as the content of arginine (2.1), tyrosine (0.57), methionine (0.4), cystine (2.5), tryptophan (2.6), and other amino acids (in oil g per 100 g of protein). The increase in the total amount of phenols (322.12 ± 6 mgEAG/kg of oil) was observed, which directly caused the higher antioxidant activity (42.65 ± 8%) of the safflower oil. These results demonstrate that flax fiber can enrich safflower oil. To find the optimal conditions for safflower oil centrifugation in a cone-shaped sedimentary-filtering centrifuge, the thickness of the flax fiber and the distance between the inner and outer perforated filter rotor were tested. It was found that the optimal and effective thickness of the flax fiber is 1.5 × 107 nm, while the thickness of the sediment is 0.5 × 107 nm.

PRPCalc2: An App for Platelet-Rich Plasma Preparation

Platelet-rich plasma (PRP), an inexpensive yet powerful treatment modality, is widely used but poorly understood. Three areas of unmet need are the ability to compare results using differing centrifuges and methods; translating a study result into a specific practice; and estimating yield and dosage without the benefit of an in-office hematology analyzer. PRPCalc2 is a set of software tools that facilitates these goals. The app consists of software tools that (1) calculate the appropriate radius for centrifugation, (2) calculate the correct revolutions per minute (RPM) for the centrifuge, (3) calculate the mean yield for the method and its confidence interval, and (4) calculate platelet dosage. Using these tools, a practitioner with any centrifuge can create and validate their own PRP preparation method and then use it to create a standardized PRP.

Spatial Distribution Characteristics of Microbial Mineralization in Saturated Sand Centrifuge Shaking Table Test

Calcium carbonate induced by microorganisms can quickly fill and cement sand particles, thereby effectively reducing the potential for the liquefaction of sand. This process could represent a new green approach to the liquefaction treatment of saturated sand and has good prospects for application. However, owing to the diversity of microbial activities and the heterogenous spatiotemporal distribution of bacterial nutrient seepage in sandy soil foundations, the resultant complex distribution of calcium carbonate deposition in a sandy soil foundation can lead to differences in solidification strength and improvement effect. To understand the influence of earthquake action on the liquefaction resistance of saturated sand treated by microorganisms, and to evaluate the effect of microbial technology on sand liquefaction prevention under dynamic load, this study simulated the dynamic stress conditions of saturated sand under shear waves, using the world's first centrifuge shaking table (R500B), which realizes horizontal and vertical two-way vibration. On the basis of spatial heterogeneity of microbial mineralization after centrifuge shaking table tests, the effect of microbial strengthening on liquefied sand was analyzed, and the spatial distribution of calcium carbonate mineralization was examined. The results showed that the distribution of microorganisms in the solidified soil exhibited obvious spatial heterogeneity with a significant edge effect. Although microbial mineralization effectively improved the liquefaction resistance of saturated sand, a sudden change in the process of calcium carbonate deposition altered the cementation of the sand with depth. Moreover, the curing strength had obvious complexity and uncertainty that directly affected the shear stiffness of the soil under dynamic load, and this constitutes one of the reasons for the degradation of shear stiffness of sand during liquefaction. The derived conclusions could be used as a reference for engineering applications of microbial treatment of a liquefiable sandy soil foundation.

Relationship between Atomic Force Microscopy and Centrifugation Measurements for Dust Fractions Implicated in Solar Panel Soiling

This work tests the reliability of a simple, rapid centrifugal technique to estimate the removal force necessary to detach common airborne particles from the surface of a photovoltaic panel. Previously, we have used atomic force microscopy (AFM) to obtain the surface-particle adhesion force for different pollutant types that generally contribute to panel soiling. To overcome the limitations of AFM, the same particles were studied as a population using an ultracentrifuge. Detachment was quantified at speeds between 1000 and 10,000 rpm, both as individual particle counts and as projected surface area coverage. The force of centrifugal detachment for each particle type followed a similar trend as the adhesion force given by AFM. Organic and carbon-based materials needed higher centrifugal speeds to be removed, suggesting a stronger attachment to the surface. However, the technique also highlighted the importance of particle diameter, aggregates, and individual particle characteristics, which should be considered when predicting the probability of detachment. We have identified the relationship between AFM-derived adhesion and centrifugal detachment forces using model particle fractions of materials commonly found to soil solar panels, demonstrating the utility in using the more easily applied to centrifugal method to obtain information that can be calibrated to direct measurements of the force of particle attachment. This technique could be applied effectively in further studies on the influence of dust composition on long-term soiling and its reversibility.

Effects of an impermeable layer on pore pressure response to tsunami-like inundation

Tsunami hazards have been observed to cause soil instability resulting in substantial damage to coastal infrastructure. Studying this problem is difficult owing to tsunamis’ transient, non-uniform and large loading characteristics. To create realistic tsunami conditions in a laboratory environment, we control the body force using a centrifuge facility. With an apparatus specifically designed to mimic tsunami inundation in a scaled-down model, we examine the effects of an embedded impermeable layer on soil instability: the impermeable layer represents a man-made pavement, a building foundation, a clay layer and alike. The results reveal that the effective vertical soil stress is substantially reduced at the underside of the impermeable layer. During the sudden runup flow, this instability is caused by a combination of temporal dislocation of soil grains and an increase in pore pressure under the impermeable layer. The instability during the drawdown phase is caused by the development of excess pore-pressure gradients, and the presence of the impermeable layer substantially enhances the pressure gradients leading to greater soil instability. The laboratory results demonstrate that the presence of an impermeable layer plays an important role in weakening the soil resistance under tsunami-like rapid runup and drawdown processes.

Ionic Liquids Separating Rubber Latex from Guayule

Danger to rubber trees (Hevea brasiliensis) from South American leaf blight fungus imperils the world’s source of natural latex for essential rubber products. Avoiding latex allergies also requires a non-Hevea latex source. The present methods for removing latex entrapped in the individual cells of guayule plants require environmentally hazardous chemicals. This study proposes a new method for latex extraction from guayule using various ionic liquids (ILs) to dissolve cell walls and release latex, as substantiated by Fourier transform infrared spectroscopy (FTIR) data.

Primary tissues may affect estimates of cavitation resistance in ferns

Different methods of measuring cavitation resistance in fern petioles lead to variable results, particularly with respect to the P₅₀ metric. We hypothesised that the fern dictyostele structure affects air entry into the xylem, and therefore impacts the shape of the vulnerability curve. Our study examined this variation by comparing vulnerability curves constructed on petioles collected from evergreen and deciduous ferns in the field, with curves generated using the standard centrifuge, air-injection and bench-top dehydration methods. Additional experiments complemented the vulnerability curves to better understand how anatomy shapes estimates of cavitation resistance. Centrifugation and radial air injection generated acceptable vulnerability curves for the deciduous species, but overestimated drought resistance in the two evergreen ferns. In these hardy plants, axial air injection and bench-top dehydration produced results that most closely aligned with observations in nature. Additional experiments revealed that the dictyostele anatomy impedes air entry into the xylem during spinning and radial air injection. Each method produced acceptable vulnerability curves, depending on the species being tested. Therefore, we stress the importance of validating the curves with in situ measures of water potential and, if possible, hydraulic data to generate realistic results with any of the methods currently available.

Short-term Response of Serum Cartilage Oligomeric Matrix Protein to Different Types of Impact Loading Under Normal and Artificial Gravity

Microgravity during long-term space flights induces degeneration of articular cartilage. Artificial gravity through centrifugation combined with exercise has been suggested as a potential countermeasure for musculoskeletal degeneration. The purpose of this study was to investigate the effect of different types of impact loading under normal and artificial gravity conditions on serum concentrations of cartilage oligomeric matrix protein (COMP), a biomarker of cartilage metabolism. Fifteen healthy male adults (26 ± 4 years, 181 ± 4 cm, 77 ± 6 kg) performed four different 30-min impact loading protocols on four experimental days: jumping with artificial gravity elicited by centrifugation in a short-arm centrifuge (AGJ), jumping with artificial gravity generated by low-pressure cylinders in a sledge jump system (SJS), vertical jumping under Earth gravity (EGJ), and running under Earth gravity (RUN). Five blood samples per protocol were taken: 30 min before, immediately before, immediately after, 30 min after, and 60 min after impact loading. Serum COMP concentrations were analyzed in these samples. During the impact exercises, ground reaction forces were recorded. Peak ground reaction forces were significantly different between the three jumping protocols (p < 0.001), increasing from AGJ (14 N/kg) to SJS (22 N/kg) to EGJ (29 N/kg) but were similar in RUN (22 N/kg) compared to SJS. The serum COMP concentration was increased (p < 0.001) immediately after all loading protocols, and then decreased (p < 0.001) at 30 min post-exercise compared to immediately after the exercise. Jumping and running under Earth gravity (EGJ and RUN) resulted in a significantly higher (p < 0.05) increase of serum COMP levels 30 min after impact loading compared to the impact loading under artificial gravity (RUN +30%, EGJ +20%, AGJ +17%, and SJS +13% compared to baseline). In conclusion, both the amplitude and the number of the impacts contribute to inducing higher COMP responses and are therefore likely important factors affecting cartilage metabolism. RUN had the largest effect on serum COMP concentration, presumably due to the high number of impacts, which was 10 times higher than for the jump modalities. Future studies should aim at establishing a dose-response relationship for different types of exercise using comparable amounts of impacts.

Effect of novel short-arm human centrifugation-induced gravitational gradients upon cardiovascular responses, cerebral perfusion and g-tolerance

KEY POINTS

The aim of this study was to determine the effect of rotational axis position (RAP and thus g-gradient) during short-arm human centrifugation (SAHC) upon cardiovascular responses, cerebral perfusion and g-tolerance. In 10 male and 10 female participants, 10 min passive SAHC runs were performed with the RAP above the head (P1), at the apex of the head (P2), or at heart level (P3), with foot-level Gz at 1.0 g, 1.7 g and 2.4 g. We hypothesized that movement of the RAP from above the head (the conventional position) towards the heart might reduce central hypovolaemia, limit cardiovascular responses, aid cerebral perfusion, and thus promote g-tolerance. Moving the RAP footward towards the heart decreased the cerebral tissue saturation index, calf circumference and heart rate responses to SAHC, thereby promoting g-tolerance. Our results also suggest that RAP, and thus g-gradient, warrants further investigation as it may support use as a holistic spaceflight countermeasure.

ABSTRACT

Artificial gravity (AG) through short-arm human centrifugation (SAHC) has been proposed as a holistic spaceflight countermeasure. Movement of the rotational axis position (RAP) from above the head towards the heart may reduce central hypovolaemia, aid cerebral perfusion, and thus promote g-tolerance. This study determined the effect of RAP upon cardiovascular responses, peripheral blood displacement (i.e. central hypovolaemia), cerebral perfusion and g-tolerance, and their inter-relationships. Twenty (10 male) healthy participants (26.2 ± 4.0 years) underwent nine (following a familiarization run) randomized 10 min passive SAHC runs with RAP set above the head (P1), at the apex of the head (P2), or at heart level (P3) with foot-level Gz at 1.0 g, 1.7 g and 2.4 g. Cerebral tissue saturation index (cTSI, cerebral perfusion surrogate), calf circumference (CC, central hypovolaemia), heart rate (HR) and digital heart-level mean arterial blood pressure (MAP) were continuously recorded, in addition to incidence of pre-syncopal symptoms (PSS). ΔCC and ΔHR increases were attenuated from P1 to P3 (ΔCC: 5.46 ± 0.54 mm to 2.23 ± 0.42 mm; ΔHR: 50 ± 4 bpm to 8 ± 2 bpm, P < 0.05). In addition, ΔcTSI decrements were also attenuated (ΔcTSI: -2.85 ± 0.48% to -0.95 ± 0.34%, P < 0.05) and PSS incidence lower in P3 than P1 (P < 0.05). A positive linear relationship was observed between ΔCC and ΔHR with increasing +Gz, and a negative relationship between ΔCC and ΔcTSI, both independent of RAP. Our data suggest that movement of RAP towards the heart (reduced g-gradient), independent of foot-level Gz, leads to improved g-tolerance. Further investigations are required to assess the effect of differential baroreceptor feedback (i.e. aortic-carotid g-gradient).

A Simple and Fast Manual Centrifuge to Spin Solutions in 96-Well PCR Plates

A simple and fast manual centrifuge was developed to spin down solutions in 96-well polymerase chain reaction (PCR) plates. A commercially available salad spinner was utilized for this purpose. Acceleration and deceleration of the centrifuge were faster than those of a conventional electric centrifuge using 96-well PCR plates. Solutions in a 96-well PCR plate settled quickly after centrifuging for only 3 s. This lightweight centrifuge can be stored under a laboratory bench or on a shelf and can be put on the bench only when required, whereas the electric centrifuge is immobile due to its weight and the requirement of electric cables. This simple centrifuge is inexpensive, requires minimal effort for making, and can be used anywhere.

Study of particle resuspension from dusty surfaces using a centrifugal method

Particle resuspension has been recognized as a secondary source of indoor air pollution by many field studies. However, some laboratory studies showed that the air velocities or force fields required to resuspend aerosol particles are very high that rarely occurred in indoor environments. In fact, the surfaces used in these studies were treated to ensure cleanliness, but in reality, dusty surfaces are ubiquitous in our daily life. This work aims to investigate the effect of dust on a surface on resuspension of a coarse particle (polyethylene) by a centrifugal method. Dusty surfaces with different loadings were made by gravitational settling of Arizona test dust on a clean poly(methyl methacrylate) substrate inside a deposition chamber. The resuspension of dust particles was first investigated, and it was found that dust particles were resuspended by two stages with different rates of resuspension. For the resuspension of the particles on the dusty surface, the remaining fraction of the polyethylene particles decreased with increasing force field and dust loading. Dust could greatly reduce the adhesion of the particles from one to two orders of magnitude depending on loadings. This gives an explanation to the discrepancy between the field and the laboratory studies.

Potential Application of Centrifuges to Protect the CNS in Space and on Earth

OBJECTIVE

Centrifuges are the principal means of generating physiological hypergravity and have been used for many medical purposes, including the therapy of psychiatric diseases and evaluation of vestibular system in the pilots. In particular, modern centrifuges have evolved into mechanically sophisticated precision instruments compared to primitive ones in old times, indicating that centrifuges might possess great potential in modern medicine. Indeed, studies are in progress to apply centrifuges to musculoskeletal degenerative diseases, such as osteoporosis and sarcopenia. Given that the agingrelated diseases are manifested under microgravity conditions, including astronauts and the bed-ridden elderly, it is reasonable to speculate that centrifuge-induced hypergravity may counteract the progression of these diseases. Such a view may also be important for neurodegenerative diseases for which the radical treatments are yet to be established. Therefore, the main objective of this paper is to discuss a potential therapeutic use of centrifuges for protection against the central nervous system (CNS) disorders, both in space and on Earth. Mechanistically hypergravity may exert stimulatory effects on preconditioning, chaperone expression, synapse plasticity, and growth and differentiation in the nervous system. Furthermore, hypergravity may suppress the progress of type II diabetes mellitus (T2DM), leading to inhibition of T2DM-triggered CNS disorders, including neurodegenerative diseases, ischemia and depression.

CONCLUSION

Moreover, it is possible that hypergravity may counteract the neurodegeneration in hippocampus induced by the microgravity conditions and psychiatric diseases. Collectively, further investigations are warranted to demonstrate that centrifuge-induced hypergravity may be beneficial for the therapy of the CNS disorders.

Understanding and modeling retention of mammalian cells in fluidized bed centrifuges

Within the last decade, fully disposable centrifuge technologies, fluidized-bed centrifuges (FBC), have been introduced to the biologics industry. The FBC has found a niche in cell therapy where it is used to collect, concentrate, and then wash mammalian cell product while continuously discarding centrate. The goal of this research was to determine optimum FBC conditions for recovery of live cells, and to develop a mathematical model that can assist with process scaleup. Cell losses can occur during bed formation via flow channels within the bed. Experimental results with the kSep400 centrifuge indicate that, for a given volume processed: the bed height (a bed compactness indicator) is affected by RPM and flowrate, and dead cells are selectively removed during operation. To explain these results, two modeling approaches were used: (i) equating the centrifugal and inertial forces on the cells (i.e., a force balance model or FBM) and (ii) a two-phase computational fluid dynamics (CFD) model to predict liquid flow patterns and cell retention in the bowl. Both models predicted bed height vs. time reasonably well, though the CFD model proved more accurate. The flow patterns predicted by CFD indicate a Coriolis-driven flow that enhances uniformity of cells in the bed and may lead to cell losses in the outflow over time. The CFD-predicted loss of viable cells and selective removal of the dead cells generally agreed with experimental trends, but did over-predict dead cell loss by up to 3-fold for some of the conditions. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:1520-1530, 2016.

Spinning Liquid Marble and Its Dual Applications as Microcentrifuge and Miniature Localized Viscometer

Liquid marble offers an attractive droplet manipulation approach by isolating microdroplet in a nonstick encapsulating shell formed via the spontaneous coating of hydrophobic particles onto the liquid surface. While liquid marble prepared using magnetic nanoparticles enables precise spatiotemporal actuation of microdroplets, these manipulations are generally limited to simple and linear spatial maneuver of microdroplets. Herein, we demonstrate the unique and three-dimensional spinning of microliter-sized liquid marble (LM) and its subsequent dual applications as (1) the world's smallest centrifuge and (2) a miniature and localized viscometer. Our LM is responsive to an applied rotating magnetic field, with its spinning speed programmable between 0 and 1300 rpm. This spinning generates an unprecedented centrifugal force of >2g in a LM of ∼1 mm radius. Such centrifugal force facilitates an outward and radial hydrodynamic flow in the enclosed microdroplet, enabling LM to serve as a microcentrifuge for the sedimentation of nanoparticles with >85% separation efficiency. Furthermore, we apply spinning LM as an ultrasensitive spin-to-viscosity transducer to quantify the viscosity of the external suspended liquid in the relative viscosity (η/ηwater) range of 1-70 using ≤1 mL liquid sample. Collectively, the ensemble of benefits offered by spinning LM creates enormous opportunities in the development of multifunctional micromagneto-mechanical devices as promising surface-sensitive microsensor, miniature centrifugal pump, and even microreactor with directed heat and mass transfer mechanism.

Artificial gravity as a countermeasure for mitigating physiological deconditioning during long-duration space missions

In spite of the experience gained in human space flight since Yuri Gagarin’s historical flight in 1961, there has yet to be identified a completely effective countermeasure for mitigating the effects of weightlessness on humans. Were astronauts to embark upon a journey to Mars today, the 6-month exposure to weightlessness en route would leave them considerably debilitated, even with the implementation of the suite of piece-meal countermeasures currently employed. Continuous or intermittent exposure to simulated gravitational states on board the spacecraft while traveling to and from Mars, also known as artificial gravity, has the potential for enhancing adaptation to Mars gravity and re-adaptation to Earth gravity. Many physiological functions are adversely affected by the weightless environment of spaceflight because they are calibrated for normal, Earth’s gravity. Hence, the concept of artificial gravity is to provide a broad-spectrum replacement for the gravitational forces that naturally occur on the Earth’s surface, thereby avoiding the physiological deconditioning that takes place in weightlessness. Because researchers have long been concerned by the adverse sensorimotor effects that occur in weightlessness as well as in rotating environments, additional study of the complex interactions among sensorimotor and other physiological systems in rotating environments must be undertaken both on Earth and in space before artificial gravity can be implemented.

Root resistance to cavitation is accurately measured using a centrifuge technique

Plants transport water under negative pressure and this makes their xylem vulnerable to cavitation. Among plant organs, root xylem is often highly vulnerable to cavitation due to water stress. The use of centrifuge methods to study organs, such as roots, that have long vessels are hypothesized to produce erroneous estimates of cavitation resistance due to the presence of open vessels through measured samples. The assumption that roots have long vessels may be premature since data for root vessel length are sparse; moreover, recent studies have not supported the existence of a long-vessel artifact for stems when a standard centrifuge technique was used. We examined resistance to cavitation estimated using a standard centrifuge technique and compared these values with native embolism measurements for roots of seven woody species grown in a common garden. For one species we also measured vulnerability using single-vessel air injection. We found excellent agreement between root native embolism and the levels of embolism measured using a centrifuge technique, and with air-seeding estimates from single-vessel injection. Estimates of cavitation resistance measured from centrifuge curves were biologically meaningful and were correlated with field minimum water potentials, vessel diameter (VD), maximum xylem-specific conductivity (Ksmax) and vessel length. Roots did not have unusually long vessels compared with stems; moreover, root vessel length was not correlated to VD or to the vessel length of stems. These results suggest that root cavitation resistance can be accurately and efficiently measured using a standard centrifuge method and that roots are highly vulnerable to cavitation. The role of root cavitation resistance in determining drought tolerance of woody species deserves further study, particularly in the context of climate change.

Whole-motion model of perception during forward- and backward-facing centrifuge runs

Illusory perceptions of motion and orientation arise during human centrifuge runs without vision. Asymmetries have been found between acceleration and deceleration, and between forward-facing and backward-facing runs. Perceived roll tilt has been studied extensively during upright fixed-carriage centrifuge runs, and other components have been studied to a lesser extent. Certain, but not all, perceptual asymmetries in acceleration-vs-deceleration and forward-vs-backward motion can be explained by existing analyses. The immediate acceleration-deceleration roll-tilt asymmetry can be explained by the three-dimensional physics of the external stimulus; in addition, longer-term data has been modeled in a standard way using physiological time constants. However, the standard modeling approach is shown in the present research to predict forward-vs-backward-facing symmetry in perceived roll tilt, contradicting experimental data, and to predict perceived sideways motion, rather than forward or backward motion, around a curve. The present work develops a different whole-motion-based model taking into account the three-dimensional form of perceived motion and orientation. This model predicts perceived forward or backward motion around a curve, and predicts additional asymmetries such as the forward-backward difference in roll tilt. This model is based upon many of the same principles as the standard model, but includes an additional concept of familiarity of motions as a whole.