Effective Charge Collection of Electron Transport Layers for High-Performance Quantum Dot Infrared Solar Cells

Infrared (IR) solar cells, capable of converting low-energy IR photons to electron-hole pairs, are promising optoelectronic devices by broadening the utilization range of the solar spectrum to the short-wavelength IR region. The emerging PbS colloidal quantum dot (QD) IR solar cells attract much attention due to their tunable band gaps in the IR region, potential multiple exciton generation, and facile solution processing. In PbS QD solar cells, ZnO is commonly utilized as an electron transport layer (ETL) to establish a depleted heterostructure with a QD photoactive layer. However, band gap shrinkage of large PbS QDs makes it necessary to tailor the behaviors of the ZnO ETL for efficient carrier extraction in the devices. Herein, the characteristics of ZnO ETL are efficiently and flexibly tailored to match the QD layer by handily adjusting the postannealing process of ZnO ETL. With a suitable temperature, the well-matched energy level alignment and suppressed trap states are simultaneously achieved in the ZnO ETL, effectively reducing the nonradiative recombination and accelerating the electron injection from the QD layer to ETL. As a consequence, a high-performance PbS QD photovoltaic device with power conversion efficiencies (PCEs) of 10.09% and 1.37% is obtained under AM 1.5 and 1100 nm filtered solar illumination, demonstrating a simple and effective approach for achieving high-performance IR photoelectric devices.

Matching Charge Extraction Contact for Infrared PbS Colloidal Quantum Dot Solar Cells

Infrared solar cells (IRSCs) can supplement silicon or perovskite SCs to broaden the utilization of the solar spectrum. As an ideal infrared photovoltaic material, PbS colloidal quantum dots (CQDs) with tunable bandgaps can make good use of solar energy, especially the infrared region. However, as the QD size increases, the energy level shrinking and surface facet evolution makes us reconsider the matching charge extraction contacts and the QD passivation strategy. Herein, different to the traditional sol-gel ZnO layer, energy-level aligned ZnO thin film from a magnetron sputtering method is adopted for electron extraction. In addition, a modified hybrid ligand recipe is developed for the facet passivation of large size QDs. As a result, the champion IRSC delivers an open circuit voltage of 0.49 V and a power conversion efficiency (PCE) of 10.47% under AM1.5 full-spectrum illumination, and the certified PCE is over 10%. Especially the 1100 nm filtered efficiency achieves 1.23%. The obtained devices also show high storage stability. The present matched electron extraction and QD passivation strategies are expected to highly booster the IR conversion yield and promote the fast development of new conception QD optoelectronics.

Efficiently Passivated PbSe Quantum Dot Solids for Infrared Photovoltaics

Infrared (IR) solar cells are promising devices for significantly improving the power conversion efficiency of common solar cells by harvesting the low-energy IR photons. PbSe quantum dots (QDs) are superior IR photon absorbing materials due to their strong quantum confinement and thus strong interdot electronic coupling. However, the high chemical activity of PbSe QDs leads to etching and poor passivation in ligand exchange, resulting in a high trap-state density and a high open circuit voltage (V_OC) deficit. Here we develop a hybrid ligand co-passivation strategy to simultaneously passivate the Pb and Se sites; that is, halide anions passivate the Pb sites and Cd cations passivate the Se sites. The cation and anion hybrid passivation substantially improves the quality of PbSe QD solids, giving rise to an excellent trap-state control and prolonged carrier lifetime. A high V_OC and a high short circuit current density (J_SC) are achieved simultaneously in the IR QD solar cells based on this hybrid ligand treatment. Finally, a IR-PCE of 1.31% under the 1100-nm-filtered solar illumination is achieved in the PbSe QD solar cells, which is the highest IR-PCE for PbSe QD IR solar cells at present. Additionally, the PbSe QD devices show a high external quantum efficiency of 80% at ∼1295 nm.

A Facet-Specific Quantum Dot Passivation Strategy for Colloid Management and Efficient Infrared Photovoltaics

Colloidal nanocrystals combine size- and facet-dependent properties with solution processing. They offer thus a compelling suite of materials for technological applications. Their size- and facet-tunable features are studied in synthesis; however, to exploit their features in optoelectronic devices, it will be essential to translate control over size and facets from the colloid all the way to the film. Larger-diameter colloidal quantum dots (CQDs) offer the attractive possibility of harvesting infrared (IR) solar energy beyond absorption of silicon photovoltaics. These CQDs exhibit facets (nonpolar (100)) undisplayed in small-diameter CQDs; and the materials chemistry of smaller nanocrystals fails consequently to translate to materials for the short-wavelength IR regime. A new colloidal management strategy targeting the passivation of both (100) and (111) facets is demonstrated using distinct choices of cations and anions. The approach leads to narrow-bandgap CQDs with impressive colloidal stability and photoluminescence quantum yield. Photophysical studies confirm a reduction both in Stokes shift (≈47 meV) and Urbach tail (≈29 meV). This approach provides a ≈50% increase in the power conversion efficiency of IR photovoltaics compared to controls, and a ≈70% external quantum efficiency at their excitonic peak.