Large-scale cranial window for in vivo mouse brain imaging utilizing fluoropolymer nanosheet and light-curable resin

Two-photon microscopy enables in vivo imaging of neuronal activity in mammalian brains at high resolution. However, two-photon imaging tools for stable, long-term, and simultaneous study of multiple brain regions in same mice are lacking. Here, we propose a method to create large cranial windows covering such as the whole parietal cortex and cerebellum in mice using fluoropolymer nanosheets covered with light-curable resin (termed the 'Nanosheet Incorporated into light-curable REsin' or NIRE method). NIRE method can produce cranial windows conforming the curved cortical and cerebellar surfaces, without motion artifacts in awake mice, and maintain transparency for >5 months. In addition, we demonstrate that NIRE method can be used for in vivo two-photon imaging of neuronal ensembles, individual neurons and subcellular structures such as dendritic spines. The NIRE method can facilitate in vivo large-scale analysis of heretofore inaccessible neural processes, such as the neuroplastic changes associated with maturation, learning and neural pathogenesis.

Highly sensitive label-free biosensor: graphene/CaF2 multilayer for gas, cancer, virus, and diabetes detection with enhanced quality factor and figure of merit

One of the primary goals for the researchers is to create a high-quality sensor with a simple structure because of the urgent requirement to identify biomolecules at low concentrations to diagnose diseases and detect hazardous chemicals for health early on. Recently graphene has attracted much interest in the field of improved biosensors. Meanwhile, graphene with new materials such as CaF2 has been widely used to improve the applications of graphene-based sensors. Using the fantastic features of the graphene/CaF2 multilayer, this article proposes an improvement sensor in the sensitivity (S), the figure of merit (FOM), and the quality factor (Q). The proposed sensor is based on the five-layers graphene/dielectric grating integrated with a Fabry-Perot cavity. By tuning graphene chemical potential (µc), due to the semi-metal features of graphene, the surface plasmon resonance (SPR) waves excited at the graphene/dielectric boundaries. Due to the vertical polarization of the source to the gratings and the symmetry of the electric field, both corners of the grating act as electric dipoles, and this causes the propagation of plasmonic waves on the graphene surface to propagate towards each other. Finally, it causes Fabry-Perot (FP) interference on the surface of graphene in the proposed structure's active medium (the area where the sample is located). In this article, using the inherent nature of FP interference and its S to the environment's refractive index (RI), by changing a minimal amount in the RI of the sample, the resonance wavelength (interferometer order) shifts sharply. The proposed design can detect and sense some cancers, such as Adrenal Gland Cancer, Blood Cancer, Breast Cancer I, Breast Cancer II, Cervical Cancer, and skin cancer precisely. By optimizing the structure, we can achieve an S as high as 9000 nm/RIU and a FOM of about 52.14 for the first resonance order (M1). Likewise, the remarkable S of 38,000 nm/RIU and the FOM of 81 have been obtained for the second mode (M2). In addition, the proposed label-free SPR sensor can detect changes in the concentration of various materials, including gases and biomolecules, hemoglobin, breast cancer, diabetes, leukemia, and most alloys, with an accuracy of 0.001. The proposed sensor can sense urine concentration with a maximum S of 8500 nm/RIU and cancers with high S in the 6000 nm/RIU range to 7000 nm/RIU. Also, four viruses, such as M13 bacteriophage, HIV type one, Herpes simplex type 1, and influenza, have been investigated, showing Maximum S (for second resonance mode of λR(M2) of 8000 nm/RIU (λR(M2) = 11.2 µm), 12,000 nm/RIU (λR(M2) = 10.73 µm), 38,000 nm/RIU (λR(M2) = 11.78 µm), and 12,000 nm/RIU (λR(M2) = 10.6 µm), respectively, and the obtained S for first resonance mode (λR(M1)) for mentioned viruses are 4740 nm/RIU (λR(M1) = 8.7 µm), 8010 nm/RIU (λR(M1) = 8.44 µm), 8100 nm/RIU (λR(M1) = 10.15 µm), and 9000 (λR(M1) = 8.36 µm), respectively.

Bio-inspired antimicrobial surfaces fabricated by glancing angle deposition

This paper describes the fabrication of cicada-wing-inspired antimicrobial surfaces using Glancing Angle Deposition (GLAD). From the study of an annual cicada (Neotibicen Canicularis, also known as dog-day cicada) in North America, it is found that the cicada wing surfaces are composed of unique three-dimensional (3D) nanofeature arrays, which grant them extraordinary properties including antimicrobial (antifouling) and antireflective. However, the morphology of these 3D nanostructures imposes challenges in artificially synthesizing the structures by utilizing and scaling up the template area from nature. From the perspective of circumventing the difficulties of creating 3D nanofeature arrays with top-down nanofabrication techniques, this paper introduces a nanofabrication process that combines bottom-up steps: self-assembled nanospheres are used as the bases of the features, while sub-100 nm pillars are grown on top of the bases by GLAD. Scanning electron micrographs show the resemblance of the synthesized cicada wing mimicry samples to the actual cicada wings, both quantitatively and qualitatively. The synthetic mimicry samples are hydrophobic with a water contact angle of 125˚. Finally, the antimicrobial properties of the mimicries are validated by showing flat growth curves of Escherichia coli (E. coli) and by direct observation under scanning electron microscopy (SEM). The process is potentially suitable for large-area antimicrobial applications in food and biomedical industries.

Controlled self-assembly of plant proteins into high-performance multifunctional nanostructured films

The abundance of plant-derived proteins, as well as their biodegradability and low environmental impact make them attractive polymeric feedstocks for next-generation functional materials to replace current petroleum-based systems. However, efforts to generate functional materials from plant-based proteins in a scalable manner have been hampered by the lack of efficient methods to induce and control their micro and nanoscale structure, key requirements for achieving advantageous material properties and tailoring their functionality. Here, we demonstrate a scalable approach for generating mechanically robust plant-based films on a metre-scale through controlled nanometre-scale self-assembly of water-insoluble plant proteins. The films produced using this method exhibit high optical transmittance, as well as robust mechanical properties comparable to engineering plastics. Furthermore, we demonstrate the ability to impart nano- and microscale patterning into such films through templating, leading to the formation of hydrophobic surfaces as well as structural colour by controlling the size of the patterned features.

Nucleobases thin films deposited on nanostructured transparent conductive electrodes for optoelectronic applications

Environmentally-friendly bio-organic materials have become the centre of recent developments in organic electronics, while a suitable interfacial modification is a prerequisite for future applications. In the context of researches on low cost and biodegradable resource for optoelectronics applications, the influence of a 2D nanostructured transparent conductive electrode on the morphological, structural, optical and electrical properties of nucleobases (adenine, guanine, cytosine, thymine and uracil) thin films obtained by thermal evaporation was analysed. The 2D array of nanostructures has been developed in a polymeric layer on glass substrate using a high throughput and low cost technique, UV-Nanoimprint Lithography. The indium tin oxide electrode was grown on both nanostructured and flat substrate and the properties of the heterostructures built on these two types of electrodes were analysed by comparison. We report that the organic-electrode interface modification by nano-patterning affects both the optical (transmission and emission) properties by multiple reflections on the walls of nanostructures and the electrical properties by the effect on the organic/electrode contact area and charge carrier pathway through electrodes. These results encourage the potential application of the nucleobases thin films deposited on nanostructured conductive electrode in green optoelectronic devices.

Formation of the hollow nanopillar arrays through the laser-induced transformation of TiO2 nanotubes

In the following article, we present a simple, two-step method of creating spaced, hollow nanopillars, from the titania nanotube arrays via pulsed laser-treatment. Due to the high ordering of the structure, the prepared material exhibits photonic properties, which has been shown to increase the overall photoefficiency. The optical and morphological changes in the titania nanotubes after pulsed laser-treatment with 532, 355, and 266 nm wavelengths in the 10-50 mJ/cm2 fluence range are studied. The investigation reveals, that by using appropriate wavelength and energy, the number of surface defects, geometrical features, or both can be tailored.

On-chip protein separation with single-molecule resolution

Accurate identification of both abundant and rare proteins hinges on the development of single-protein sensing methods. Given the immense variation in protein expression levels in a cell, separation of proteins by weight would improve protein classification strategies. Upstream separation facilitates sample binning into smaller groups while also preventing sensor overflow, as may be caused by highly abundant proteins in cell lysates or clinical samples. Here, we scale a bulk analysis method for protein separation, sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), to the single-molecule level using single-photon sensitive widefield imaging. Single-molecule sensing of the electrokinetically moving proteins is achieved by in situ polymerization of the PAGE in a low-profile fluidic channel having a depth of only ~ 0.6 µm. The polyacrylamide gel restricts the Brownian kinetics of the proteins, while the low-profile channel ensures that they remain in focus during imaging, allowing video-rate monitoring of single-protein migration. Calibration of the device involves separating a set of Atto647N-covalently labeled recombinant proteins in the size range of 14-70 kDa, yielding an exponential dependence of the proteins' molecular weights on the measured mobilities, as expected. Subsequently, we demonstrate the ability of our fluidic device to separate and image thousands of proteins directly extracted from a human cancer cell line. Using single-particle image analysis methods, we created detailed profiles of the separation kinetics of lysine and cysteine -labeled proteins. Downstream coupling of the device to single-protein identification sensors may provide superior protein classification and improve our ability to analyze complex biological and medical protein samples.

Scalable fabrication of sub-10 nm polymer nanopores for DNA analysis

We present the first fabrication of sub-10 nm nanopores in freestanding polymer membranes via a simple, cost-effective, high-throughput but deterministic fabrication method. Nanopores in the range of 10 nm were initially produced via a single-step nanoimprinting process, which was further reduced to sub-10 nm pores via a post-NIL polymer reflow process. The low shrinkage rate of 2.7 nm/min obtained under the conditions used for the reflow process was the key to achieving sub-10 nm pores with a controllable pore size. The fabricated SU-8 nanopore membranes were successfully employed for transient current measurements during the translocation of DNA molecules through the nanopores.