Electronic Spin Alignment within Homologous NiS2/NiSe2 Heterostructures to Promote Sulfur Redox Kinetics in Lithium-Sulfur Batteries

The catalytic activation of the Li-S reaction is fundamental to maximize the capacity and stability of Li-S batteries (LSBs). Current research on Li-S catalysts mainly focuses on optimizing the energy levels to promote adsorption and catalytic conversion, while frequently overlooking the electronic spin state influence on charge transfer and orbital interactions. Here, hollow NiS2/NiSe2 heterostructures encapsulated in a nitrogen-doped carbon matrix (NiS2/NiSe2@NC) are synthesized and used as a catalytic additive in sulfur cathodes. The NiS2/NiSe2 heterostructure promotes the spin splitting of the 3d orbital, driving the Ni3+ transformation from low to high spin. This high spin configuration raises the electronic energy level and activates the electronic state. This accelerates the charge transfer and optimizes the adsorption energy, lowering the reaction energy barrier of the polysulfides conversion. Benefiting from these characteristics, LSBs based on NiS2/NiSe2@NC/S cathodes exhibit high initial capacity (1458 mAh·g⁻1 at 0.1C), excellent rate capability (572 mAh·g⁻1 at 5C), and stable cycling with an average capacity decay rate of only 0.025% per cycle at 1C during 500 cycles. Even at high sulfur loadings (6.2 mg·cm⁻2), high initial capacities of 1173 mAh·g⁻1 (7.27 mAh·cm⁻2) are measured at 0.1C, and 1058 mAh·g⁻1 is retained after 300 cycles.

Extrinsic Pseudocapacitive NiSe/rGO/g-C3N4 Nanocomposite for High-Performance Hybrid Supercapacitors

Battery-type materials with ultrahigh energy density show great potential for hybrid supercapacitors (HSCs). In this work, we have developed a nickel selenide (NiSe)/reduced graphene oxide (rGO)/graphitic carbon nitride (g-C3N4) ternary composite as a promising positive electrode for hybrid supercapacitors (HSCs). The extended π-conjugated planar layers of g-C3N4 promote strong interconnectivity with rGO, which further enhances surface area, surface free energy, and efficient electron/ionic path. Additionally, it establishes clear ion diffusion pathways, serving as ion reservoirs during charge and discharge and facilitating efficient redox reactions. As a result, the NiSe/g-C3N4/rGO nanocomposite electrode displayed a specific capacity of 412.6 mA h g-1 at 1 A g-1. Later, the HSC device was assembled using the nanocomposite as the positive electrode and activated carbon as the negative electrode, which delivered an energy density of 65.2 Wh kg-1 at a power density of 750 W kg-1. Notably, the HSC device maintained excellent cyclic stability, preserving 93.3% of its initial performance and Coulombic efficiency of 86.6% for 10,000 charge-discharge cycles at 5 A g-1. These findings underscore the potential utility of NiSe/g-C3N4/rGO as a versatile and effective electrode material for the strategic development of HSC devices.

Selective Adsorption Behavior Modulation on Nickel Selenide by Heteroatom Implantation and Heterointerface Construction Achieves Efficient Co-production of H2 and Formate

Glycerol-assisted hybrid water electrolysis is a potential strategy to achieve energy-efficient hydrogen production. However, the design of an efficient catalyst for the specific reaction is still a key challenge, which suffers from the barrier of regulating the adsorption characteristics of distinctive intermediates in different reactions. Herein, a novel rationale that achieves selective adsorption behavior modulation for self-supported nickel selenide electrode by heteroatom implantation and heterointerface construction through electrodeposition is developed, which can realize nichetargeting optimization on hydrogen evolution reaction (HER) and glycerol oxidation reaction (GOR), respectively. Specifically, the prepared Mo-doped Ni3 Se2 electrode exhibits superior catalytic activity for HER, while the NiSe-Ni3 Se2 electrode exhibits high Faradaic efficiency (FE) towards formate production for GOR. A two-electrode electrolyzer exhibits superb activity that only needs an ultralow cell voltage of 1.40 V to achieve 40 mA cm-2 with a high FE (97%) for formate production. Theoretical calculation unravels that the introduction of molybdenum contributes to the deviation of the d-band center of Ni3 Se2 from the Fermi level, which is conducive to hydrogen desorption. Meanwhile, the construction of the heterojunction induces the distortion of the surface structure of nickel selenide, which exposes highly active nickel sites for glycerol adsorption, thus contributing to the excellent electrocatalytic performance.

Selective Ethylene Glycol Oxidation to Formate on Nickel Selenide with Simultaneous Evolution of Hydrogen

There is an urgent need for cost-effective strategies to produce hydrogen from renewable net-zero carbon sources using renewable energies. In this context, the electrochemical hydrogen evolution reaction can be boosted by replacing the oxygen evolution reaction with the oxidation of small organic molecules, such as ethylene glycol (EG). EG is a particularly interesting organic liquid with two hydroxyl groups that can be transformed into a variety of C1 and C2 chemicals, depending on the catalyst and reaction conditions. Here, a catalyst is demonstrated for the selective EG oxidation reaction (EGOR) to formate on nickel selenide. The catalyst nanoparticle (NP) morphology and crystallographic phase are tuned to maximize its performance. The optimized NiS electrocatalyst requires just 1.395 V to drive a current density of 50 mA cm^-2 in 1 m potassium hydroxide (KOH) and 1 m EG. A combination of in situ electrochemical infrared absorption spectroscopy (IRAS) to monitor the electrocatalytic process and ex situ analysis of the electrolyte composition shows the main EGOR product is formate, with a Faradaic efficiency above 80%. Additionally, C2 chemicals such as glycolate and oxalate are detected and quantified as minor products. Density functional theory (DFT) calculations of the reaction process show the glycol-to-oxalate pathway to be favored via the glycolate formation, where the CC bond is broken and further electro-oxidized to formate.

Mechanochemical Synthesis of Nickel Mono- and Diselenide: Characterization and Electrical and Optical Properties

Nickel mono- (NiSe) and diselenide (NiSe₂) were produced from stoichiometric mixtures of powdered Ni and Se precursors by the one-step, undemanding mechanochemical reactions. The process was carried out by high-energy milling for 30 and 120 min in a planetary ball mill. The kinetics of the reactions were documented, and the products were studied in terms of their crystal structure, morphology, electrical, and optical properties. X-ray powder diffraction confirmed that NiSe has hexagonal and NiSe₂ cubic crystal structure with an average crystallite size of 10.5 nm for NiSe and 13.3 nm for NiSe₂. Their physical properties were characterized by the specific surface area measurements and particle size distribution analysis. Transmission electron microscopy showed that the prepared materials contain nanoparticles of irregular shape, which are agglomerated into clusters of about 1-2 μm in diameter. The first original values of electrical conductivity, resistivity, and sheet resistance of nickel selenides synthesized by milling were measured. The obtained bandgap energy values determined using UV-Vis spectroscopy confirmed their potential use in photovoltaics. Photoluminescence spectroscopy revealed weak luminescence activity of the materials. Such synthesis of nickel selenides can easily be carried out on a large scale by milling in an industrial mill, as was verified earlier for copper selenide synthesis.

Dual-Doping and Synergism toward High-Performance Seawater Electrolysis

Hydrogen (H₂ ) production from direct seawater electrolysis is an economically appealing yet fundamentally and technically challenging approach to harvest clean energy. The current seawater electrolysis technology is significantly hindered by the poor stability and low selectivity of the oxygen evolution reaction (OER) due to the competition with chlorine evolution reaction in practical application. Herein, iron and phosphor dual-doped nickel selenide nanoporous films (Fe,P-NiSe₂ NFs) are rationally designed as bifunctional catalysts for high-efficiency direct seawater electrolysis. The doping of Fe cation increases the selectivity and Faraday efficiency (FE) of the OER. While the doping of P anions improves the electronic conductivity and prevents the dissolution of selenide by forming a passivation layer containing P-O species. The Fe-dopant is identified as the primary active site for the hydrogen evolution reaction, and meanwhile, stimulates the adjacent Ni atoms as active centers for the OER. The experimental analyses and theoretical calculations provide an insightful understanding of the roles of dual-dopants in boosting seawater electrolysis. As a result, a current density of 0.8 A cm^-2 is archived at 1.8 V with high OER selectivity and long-term stability for over 200 h, which surpasses the benchmarking platinum-group-metals-free electrolyzers.

Crystal structure refinements of stoichiometric Ni3Se2 and NiSe

Single crystals of Ni₃Se₂ (trinickel diselenide) and NiSe (nickel selenide) with stoichiometric chemical compositions were grown in evacuated silica-glass tubes. The chemical compositions of the single crystals of Ni₃Se₂ and NiSe were determined by scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM/EDS). The crystal structures of Ni₃Se₂ [rhombohedral, space group R32, a = 6.02813 (13), c = 7.24883 (16) Å, Z = 3] and NiSe [hexagonal, space group P6₃/mmc, a = 3.66147 (10), c = 5.35766 (16) Å, Z = 2] were analyzed by single-crystal X-ray diffraction and refined to yield R values of 0.020 and 0.018 for 117 and 85 unique reflections, respectively, with F_o > 4σ(F_o). R32 is a Sohncke type of space group where enantiomeric structures can exist; the single-domain structure obtained by the refinement was confirmed to be correct by a Flack parameter of -0.05 (2). The existence of Ni-Ni bonds was confirmed in both compounds, in addition to the Ni-Se bonds. The value of the atomic displacement parameter (mean-square displacement) of each atom in NiSe was larger than that in Ni₃Se₂. The larger amplitude of the atoms in NiSe corresponds to longer Ni-Se and Ni-Ni bond lengths in NiSe than in Ni₃Se₂. The Debye temperatures, θ_D, estimated from observed mean-square displacements for Ni and Se in Ni₃Se₂, were 322 and 298 K, respectively, while those for Ni and Se in NiSe were 246 and 241 K, respectively. The existence of large cavities in the structure and the weak bonding force are likely responsible for the brittle and soft nature of the NiSe crystal.

Ni(OH)2 Nanoflakes Supported on 3D Ni3 Se2 Nanowire Array as Highly Efficient Electrodes for Asymmetric Supercapacitor and Ni/MH Battery

Porous Ni(OH)₂ nanoflakes are directly grown on the surface of nickel foam supported Ni₃ Se₂ nanowire arrays using an in situ growth procedure to form 3D Ni₃ Se₂ @Ni(OH)₂ hybrid material. Owing to good conductivity of Ni₃ Se₂ , high specific capacitance of Ni(OH)₂ and its unique architecture, the obtained Ni₃ Se₂ @Ni(OH)₂ exhibits a high specific capacitance of 1689 µAh cm^-2 (281.5 mAh g^-1 ) at a discharge current of 3 mA cm^-2 and a superior rate capability. Both the high energy density of 59.47 Wh kg^-1 at a power density of 100.54 W kg^-1 and remarkable cycling stability with only a 16.4% capacity loss after 10 000 cycles are demonstrated in an asymmetric supercapacitor cell comprising Ni₃ Se₂ @Ni(OH)₂ as a positive electrode and activated carbon as a negative electrode. Furthermore, the cell achieved a high energy density of 50.9 Wh L^-1 at a power density of 83.62 W L^-1 in combination with an extraordinary coulombic efficiency of 97% and an energy efficiency of 88.36% at 5 mA cm^-2 when activated carbon is replaced by metal hydride from a commercial NiMH battery. Excellent electrochemical performance indicates that Ni₃ Se₂ @Ni(OH)₂ composite can become a promising electrode material for energy storage applications.

Orthorhombic NiSe2 Nanocrystals on Si Nanowires for Efficient Photoelectrochemical Water Splitting

Photocatalytic water splitting is a vital technology for clean renewable energy. Despite enormous progress, the search for earth-abundant photocatalysts with long-term stability and high catalytic activity is still an important issue. We report three possible polymorphs of nickel selenide (orthorhombic phase NiSe₂, cubic phase NiSe₂, and hexagonal phase NiSe) as bifunctional catalysts for water-splitting photoelectrochemical (PEC) cells. Photocathodes or photoanodes were fabricated by depositing the nickel selenide nanocrystals (NCs) onto p- or n-type Si nanowire arrays. Detailed structural analysis reveals that compared to the other two types, the orthorhombic NiSe₂ NCs are more metallic and form less surface oxides. As a result, the orthorhombic NiSe₂ NCs significantly enhanced the performance of water-splitting PEC cells by increasing the photocurrents and shifting the onset potentials. The high photocurrent is ascribed to the excellent catalytic activity toward water splitting, resulting in a low charge-transfer resistance. The onset potential shift can be determined by the shift of the flat-band potential. A large band bending occurs at the electrolyte interface, so that photoelectrons or photoholes are efficiently generated to accelerate the photocatalytic reaction at the active sites of orthorhombic NiSe₂. The remarkable bifunctional photocatalytic activity of orthorhombic NiSe₂ promises efficient PEC water splitting.

Ni0.85Se@MoSe2 Nanosheet Arrays as the Electrode for High-Performance Supercapacitors

In this study, we report novel Ni_0.85Se@MoSe₂ nanosheet arrays prepared by a facile one-step hydrothermal method through nickel (Ni) foam as Ni precursor and the framework of MoSe₂. Owing to the unique interconnection and hierarchical porous nanosheet array architecture, the Ni_0.85Se@MoSe₂ nanosheet arrays exhibit a high specific capacitance of 774 F g^-1 at the current density of 1 A g^-1, which is almost 2 times higher than that (401 F g^-1) of the Ni_0.85Se matrix and about 7 times greater than that (113 F g^-1) of the MoSe₂ nanoparticles. Moreover, we report an asymmetric supercapacitor (ASC), which is fabricated by using the Ni_0.85Se@MoSe₂ nanosheet arrays as the positive electrode and the graphene nanosheets (GNS) as the negative electrode, with aqueous KOH as the electrolyte. The Ni_0.85Se@MoSe₂//GNS ASC possesses an output voltage of 1.6 V, an energy density of 25.5 Wh kg^-1 at a power density of 420 W kg^-1, and a cycling stability of 88% capacitance retention after 5000 cycles. These results indicate that the Ni_0.85Se@MoSe₂ nanosheet arrays are a good electrode for supercapacitors.

One-Pot Solvothermal in Situ Growth of 1D Single-Crystalline NiSe on Ni Foil as Efficient and Stable Transparent Conductive Oxide Free Counter Electrodes for Dye-Sensitized Solar Cells

One-dimensional single-crystal nanostructural nickel selenides were successfully in situ grown on metal nickel foils by two simple one-step solvothermal methods, which formed NiSe/Ni counter electrodes (CEs) for dye-sensitized solar cells (DSSCs). The nickel foil acted as the nickel source in the reaction process, a supporting substrate, and an electron transport "speedway". Electrochemical testing indicated that the top 1D single-crystal NiSe exhibited prominent electrocatalytic activity for I₃^- reduction. Due to the metallic conductivity of Ni substrate and the outstanding electrocatalytic activity of single-crystal NiSe, the DSSC based on a NiSe/Ni CE exhibited higher fill factor (FF) and larger short-circuit current density (J_sc) than the DSSC based on Pt/FTO CE. The corresponding power conversion efficiency (6.75%) outperformed that of the latter (6.18%). Moreover, the NiSe/Ni CEs also showed excellent electrochemical stability in the I^-/I₃^- redox electrolyte. These findings indicated that single-crystal NiSe in situ grown on Ni substrate was a potential candidate to replace Pt/TCO as a cheap and highly efficient counter electrode of DSSC.