Influence of Pre-Incubation of Inoculum with Biochar on Anaerobic Digestion Performance

The application of biochar as an additive to enhance the anaerobic digestion (AD) of biomass has been extensively studied from various perspectives. This study reported, for the first time, the influence of biochar incubation in the inoculum on the anaerobic fermentation of glucose in a batch-type reactor over 20 days. Three groups of inoculum with the same characteristics were pre-mixed once with biochar for different durations: 21 days (D21), 10 days (D10), and 0 days (D0). The BC was mixed in the inoculum at a concentration of 8.0 g/L. The proportion of the inoculum and substrate was adjusted to an inoculum-to-substrate ratio of 2.0 based on the volatile solids. The results of the experiment revealed that D21 had the highest cumulative methane yield, of 348.98 mL, compared to 322.66, 290.05, and 25.15 mL obtained from D10, D0, and the control, respectively. Three models-modified Gompertz, first-order, and Autoregressive Integrated Moving Average (ARIMA)-were used to interpret the biomethane production. All models showed promising fitting of the cumulative biomethane production, as indicated by high R2 and low RMSE values. Among these models, the ARIMA model exhibited the closest fit to the actual data. The biomethane production rate, derived from the modified Gompertz Model, increased as the incubation period increased, with D21 yielding the highest rate of 31.13 mL/gVS. This study suggests that the application of biochar in the anaerobic fermentation of glucose, particularly considering the short incubation period, holds significant potential for improving the overall performance of anaerobic digestion.

Application of Antimicrobial Photodynamic Therapy for Inactivation of Acinetobacter baumannii Biofilms

Acinetobacter baumannii is a dangerous hospital pathogen primarily due to its ability to form biofilms on different abiotic and biotic surfaces. The present study investigated the effect of riboflavin- and chlorophyllin-based antimicrobial photodynamic therapy, performed with near-ultraviolet or blue light on the viability of bacterial cells in biofilms and their structural stability, also determining the extent of photoinduced generation of intracellular reactive oxygen species as well as the ability of A. baumannii to form biofilms after the treatment. The efficacy of antimicrobial photodynamic therapy was compared with that of light alone and the role of the photosensitizer type on the photosensitization mechanism was demonstrated. We found that the antibacterial effect of riboflavin-based antimicrobial photodynamic therapy depends on the ability of photoactivated riboflavin to generate intracellular reactive oxygen species but does not depend on the concentration of riboflavin and pre-incubation time before irradiation. Moreover, our results suggest a clear interconnection between the inactivation efficiency of chlorophyllin-based antimicrobial photodynamic therapy and the sensitivity of A. baumannii biofilms to used light. In summary, all the analyzed results suggest that riboflavin-based antimicrobial photodynamic therapy and chlorophyllin-based antimicrobial photodynamic therapy have the potential to be applied as an antibacterial treatment against A. baumannii biofilms or as a preventive measure against biofilm formation.

How to Improve Sensitivity of Sandwich Lateral Flow Immunoassay for Corpuscular Antigens on the Example of Potato Virus Y?

A simple approach was proposed to decrease the detection limit of sandwich lateral flow immunoassay (LFIA) by changing the conditions for binding between a polyvalent antigen and a conjugate of gold nanoparticles (GNPs) with antibodies. In this study, the potato virus Y (PVY) was used as the polyvalent antigen, which affects economically important plants in the Solanaceae family. The obtained polyclonal antibodies that are specific to PVY were characterized using a sandwich enzyme-linked immunosorbent assay (ELISA) and surface plasmon resonance (SPR). For LFIA, the antibodies were conjugated with GNPs with a diameter of 17.4 ± 1.0 nm. We conducted LFIAs using GNP conjugates in a dried state on the test strip and after pre-incubation with a sample. Pre-incubating the GNP conjugates and sample for 30 s was found to decrease the detection limit by 60-fold from 330 ng∙mL^-1 to 5.4 ng∙mL^-1 in comparison with conventional LFIA. The developed method was successfully tested for its ability to detect PVY in infected and uninfected potato leaves. The quantitative results of the proposed LFIA with pre-incubation were confirmed by ELISA, and resulted in a correlation coefficient of 0.891. The proposed approach is rapid, simple, and preserves the main advantages of LFIA as a non-laboratory diagnostic method.

[Effects of storage temperature and time on the contents of different nitrogen forms in fresh soil samples.]

Soil nitrogen forms and contents are of great importance in ecological studies. The storage methods of soil samples have great effects on the accuracy of determination of nitrogen contents. We aimed to select a reasonable storage method for soil samples with forest soil of Castanopsis faberi fore-st at Wanmulin Nature Reserve in Jian'ou City as an example. The contents of soil ammonium, nitrate, total nitrogen, soluble organic nitrogen, amino acid nitrogen and microbial biomass nitrogen were measured in soil samples under the storage conditions of different temperature (at 25, 4 and -20 ℃) and different times (0, 7 and 30 days). The nitrogen contents during the process of cultivating under the room temperature after being frozen were also measured. The results showed that the contents of all nitrogen forms except for amino acid nitrogen were increased in the soil samples that stored at the room temperature for seven days. There were no significant differences between the contents of all the tested nitrogen forms in the refrigerated or frozen samples and the fresh soil samples. The changes of nitrogen content in soil samples at refrigerated and frozen storage were more stable than those at room temperature storage. The low temperature storage could stimulate soil mineralization. Hence, after stored for 30 days, contents of all the tested nitrogen forms in the refri-gerated and frozen storage soil samples were significantly higher than those in the fresh samples except for the soluble organic nitrogen, whereas there was no significant difference between the refrigerated and frozen storage methods. Therefore, fresh samples should be promptly processed when taken back to the laboratory. If the samples needed to storage, it should not be stored more than half a month. If the samples need a longer storage time, it must be placed in lower temperature (at -40 or -80 ℃). Pre-incubation treatment was required when the low temperature storage soil sample was subjected to an experiment. In the process of pre-incubation, the contents of all the tested nitrogen form in soil samples gradually approached the level of fresh soil sample with the increases of incubation time except for that of nitrate which decreased firstly and then increased rapidly. After incubation for about one week, the nitrogen content of soil sample returned to the level that was close to that of the fresh soil. In combination with studies previously reported, soil samples collected from field and air dried samples needed a pre-incubation for 5-14 days, and the pre-incubation time for the cold storage sample should not be less than one week.

The micro-Ames test: A direct comparison of the performance and sensitivities of the standard and 24-well plate versions of the bacterial mutation test

"Ames" bacterial mutation tests are widely performed for evaluation and registration of new materials including industrial chemicals, agrochemicals, medical devices, pharmaceuticals, pharmaceutical impurities and other materials. Tests are used to predict their potential long-term adverse health effects (including carcinogenicity). Given their importance, pre-screening 'miniaturized' versions have been developed which allow higher throughput and use less test material, including the widely-employed 24-well micro-Ames (µAmes) test which uses 20 times less material. However, little quantitative information has been published on the methodology or sensitivity of this system. We describe methods and results used in direct comparisons of the sensitivity of micro and standard systems using the same cultures, formulations, etc. Initial testing utilized the plate incorporation method and, later, the pre-incubation method. In a subsequent phase of testing, a four-way direct comparison was made between the pre-incubation and plate incorporation methods in both systems using some direct-acting mutagens. Tests used only those strain/S9/chemical combinations where a response was expected. Historical control results accumulated during testing are also presented. Spontaneous and induced revertant colony counts for the µAmes system were consistently proportionate and approximately 1/20th those for the standard Ames test. Sensitivities of the two systems were found to be nearly identical in almost all cases for a wide variety of weak and strong inorganic and organic mutagens. Standardized procedures and increased reliability of the estimate of the background revertant frequency in the µAmes system means that the two systems give equivalent results and are expected to be highly predictive of one another. Environ. Mol. Mutagen. 57:687-705, 2016. © 2016 Wiley Periodicals, Inc.