Pressure-Based Immunoassays with Versatile Electronic Sensors for Carcinoembryonic Antigen Detection

Pressure-based immunoassays have been studied for point-of-care testing for which increasing the sensitivity is still a challenge. In this study, we described an enhanced pressure-based immunoassay with a versatile electronic sensor for the sensitive biological analysis. The versatile electronic sensor had multifunctional sensing capabilities with temperature and pressure recording. Magnetic bead-modified capture antibody and platinum nanoparticle-labeled detection antibody were used as the biorecognition element of the target carcinoembryonic antigen (CEA) (as a model analyte) and would form a sandwich-type immune complex with CEA. After simple magnetic separation, this complex was transferred into the detection chamber, which contained both hydrogen peroxide (H₂O₂) and 3,3',5,5'-tetramethylbenzidine (TMB). With the catalytic ability of PtNPs, the "H₂O₂-TMB-PtNPs" system was catalyzed to generate a large amount of oxygen (O₂) and photothermal agent of oxidizer TMB (ox-TMB). Meanwhile, in a sealed chamber, further irradiation with an 808 nm near-infrared laser led to a triple-step signal amplification strategy of pressure increase, temperature increase, and gas thermal expansion to receive a strong electrical signal through the electronic sensor in real time. Thus, the amplified electrical signal from the electronic sensor could reveal the target concentration. In addition, we also verified that the synergistic system with two physical quantities had a lower limit of detection and a wider detection range compared to the detection system with a single physical quantity. In general, this immunoassay not only helped in exploring an effective signal amplification pathway but also offered an opportunity for the development of versatile electronic sensors in point-of-care settings.

Platinum Nanozyme-Triggered Pressure-Based Immunoassay Using a Three-Dimensional Polypyrrole Foam-Based Flexible Pressure Sensor

This work describes a novel and portable pressure-based point-of-care (POC) testing strategy for the sensitive and rapid detection of carcinoembryonic antigen (CEA) via a flexible pressure sensor constructed by three-dimensional (3D) polypyrrole (PPy) foam. Initially, platinum nanoparticles (PtNPs) were conjugated to the detection antibodies, which were used to form sandwich-type immunocomplexes with targets and capture antibodies in the reaction cell. Then, the carried PtNPs catalyzed the dissociation of hydrogen peroxide (H₂O₂) for the generation of oxygen (O₂) in a sealed device, translating the biomolecule recognition event into gas pressure. With the increase of pressure, a flexible pressure sensor with 3D polypyrrole foam as the sensing layer was used to sensitively monitor the pressure variations in this system. Thus, the concentration of the target could be quantitatively determined by the pressure response. Under optimal conditions, the pressure-based immunosensor showed good sensing performance for CEA in the dynamic working range from 0.2 to 60 ng/mL with a detection limit of 0.13 ng/mL. The reproducibility, specificity, and accuracy compared with commercial enzyme-linked immunosorbent assay (ELISA) kit were also acceptable. Therefore, this work provides a promising approach for developing portable and sensitive POC testing in the future.

Saw-Toothed Microstructure-Based Flexible Pressure Sensor as the Signal Readout for Point-of-Care Immunoassay

A saw-toothed microstructure-based flexible pressure sensor was designed as the signal readout for point-of-care (POC) immunoassay of carcinoembryonic antigen (CEA). In this portable POC bioassay, the sandwich-type immunoreaction was first carried out to capture the target on a microplate, which simultaneously introduced the platinum nanoparticles (PtNPs). Upon adding hydrogen peroxide (H₂O₂), the pressure as the bridge between the molecular recognition event and detectable signal was increasing rapidly, resulting from the decomposition of H₂O₂ accelerated by PtNPs. Meanwhile, a flexible pressure sensor was fabricated with high sensitivity; the ability of the pressure response was dramatically improved by adopting the saw-toothed microstructure. By coupling with the pressure sensor, the pressure change could be monitored in real time to achieve the portable detection of CEA. Under the optimum conditions, the proposed pressure-based bioassay presented good sensing performance within 0.1-40 ng/mL at a detection limit of 87 pg/mL. The reproducibility, precision, and accuracy provided by the method were also studied and satisfied.