Comparative analysis of self-cure and dual cure-dental composites on their physico-mechanical behaviour

BACKGROUND

Clinical practitioners may have become familiar with the rapid transformation of dental composites. However, they may not scientifically understand the factors influencing the mechanical and physical properties. Scientific knowledge of filler-resin interaction can significantly improve clinical understanding of resin composites. Several independent studies have examined the mechanical and physico-mechanical properties of dental resin composites; however, no comprehensive study has examined the influence of fillers and resin materials on the physico-mechanical properties of both self-cure and dual-cure composites.

METHODS

This study performed investigations on the physico-mechanical behaviour of four commercially available dual-cure dental composites (Bioactive, Fill Up!, Surefil One, Cention N) and two commercially available self-cure dental composites (Stela Capsule and Stela Automix). Test specimens for flexural and compressive strength, microhardness, fracture toughness, and hydrolytic behaviour were prepared and tested as per respective standards. The data sets were statistically analysed using one-way ANOVA and Tukey's post-hoc comparison.

RESULTS

There was a substantial variation in flexural strength and modulus values in this study, ranging from 32.0 to 113.4 MPa and 2.36 to 12.07 GPa, respectively. Similarly, there were significant differences in compressive strength between the materials in this study, ranging from 119.3 to 223.5 MPa. The highest fracture toughness value was found to be 1.41 MPa.m0.5 , while the lowest value was 0.43 MPa.m0.5 . Variations in surface microhardness were significant (24.11-68.0 N/mm2 ), which correlated with the filler content. Water sorption and solubility demonstrated high variations among materials, with Surefil One exceeding ISO 4049 thresholds significantly.

CONCLUSIONS

A linear correlation can be established between surface microhardness (HV) and flexural and compressive moduli, as well as filler content (wt.%). However, both flexural and compressive strengths are impacted by the resin's constituent monomers and the resin-filler matrix's cross-linking capability. Additionally, factors such as filler size, shape, and the cross-linking ability of the resin-filler matrix play a crucial role in fracture toughness and the propagation of cracks within the restoration. Also, resin monomers and filler particle size affect the hydrolytic degradation characteristics of composites, which can also affect their mechanical properties. © 2023 Australian Dental Association.

Models of Protective Immunity against Schistosomes: Implications for Vaccine Development

After many decades of research, a schistosome vaccine still looks to be a distant prospect. These helminths can live in the human bloodstream for years, even decades, surrounded by and feeding on the components of the immune response they provoke. The original idea of a vaccine based on the killing of invading cercariae in the skin has proven to be illusory. There has also been a realisation that even if humans develop some protection against infection over a protracted period, it very likely involves IgE-mediated responses that cannot provide the basis for a vaccine. However, it has also become clear that both invasive migrating larvae and adult worms must expose proteins and release secretions into the host environment as part of their normal biological activities. The application of modern 'omics approaches means that we now have a much better idea of the identity of these potential immune targets. This review looks at three animal models in which acquired immunity has been demonstrated and asks whether the mechanisms might inform our vaccine strategies to achieve protection in model hosts and humans. Eliciting responses, either humoral or cellular, that can persist for many months is a challenge. Arming of the lungs with effector T cells, as occurs in mice exposed to the radiation-attenuated cercarial vaccine, is one avenue. Generating IgG antibody titres that reach levels at which they can exert sustained immune pressure to cause worm elimination, as occurs in rhesus macaques, is another. The induction of memory cell populations that can detect trickle invasions of larval stages remains to be explored. One promising approach is the analysis of protective antibodies using high-density peptide arrays of target proteins to identify reactive regions. These can be combined in multi-epitope constructs to immunise a host against many targets simultaneously and cheaply.

Survival of people with untreated TB: effects of time, geography and setting

BACKGROUND: An estimated 40% of people who developed TB in 2021 were not diagnosed or treated. Pre-chemotherapy era data are a rich resource on survival of people with untreated TB. We aimed to identify heterogeneities in these data to inform their more precise use.METHODS: We extracted survival data from pre-chemotherapy era papers reporting TB-specific mortality and/or natural recovery data. We used Bayesian parametric survival analysis to model the survival distribution, stratifying by geography (North America vs. Europe), time (pre-1930 vs. post-1930), and setting (sanitoria vs. non-sanitoria).RESULTS: We found 12 studies with TB-specific mortality data. Ten-year survival was 69% in North America (95% CI 54-81) and 36% in Europe (95% CI 10-71). Only 38% (95% CI 18-63) of non-sanitorium individuals survived to 10 years compared to 69% (95% CI 41-87) of sanitoria/hospitalized patients. There were no significant differences between people diagnosed pre-1930 and post-1930 (5-year survival pre-1930: 65%, 95% CI 44-88 vs. post-1930: 72%, 95% CI 41-94).CONCLUSIONS: Mortality and natural recovery risks vary substantially by location and setting. These heterogeneities need to be considered when using pre-chemotherapy data to make inferences about expected survival of people with undiagnosed TB.

Hardness Development in Resin Composite Core Materials

PURPOSE

To investigate the hardness characteristics of 13 contemporary resin core materials.

MATERIALS AND METHODS

Specimens (n = 12) were fabricated using stainless steel molds with top surfaces of dual-cure products photopolymerized while additional groups were allowed to self-cure. Twelve Knoop hardness indentations 500 microns apart were obtained of photopolymerized top and bottom sample surfaces as well as the self-cured sample surface with the mean recorded as the representative sample hardness. Testing was completed at 10 minutes, 1 hour, and 24 hours. In addition, hardness values were compared to that obtained from polished coronal dentin samples. Mean data between groups were analyzed with Kruskal-Wallis/Dunn's, within groups with repeated measures ANOVA/Tukey's.

RESULTS

Hardness results were material dependent. All but two products demonstrated a 0.8 bottom/top Knoop hardness ratio at 10 minutes. Product's self-cure cure reaction did not attain hardness similarity with any photopolymerized top surfaces and while some materials were found to have similar dentin hardness to resin top surface ratio similarity, only one product had hardness equal to or greater than that of dentin during any time period.

CONCLUSIONS

Under this study's conditions, hardness development was material dependent and all but two products demonstrated adequate hardness-derived degree of cure assessment at 10 minutes after preparation. Self-cured samples demonstrated hardness increase; however, no self-cured material achieved hardness similarity to photopolymerized top surfaces. None of the materials achieved hardness similarity to dentin and only one product demonstrated hardness greater than that of dentin.

Tertiary Amine and Tooth Mineral Hydroxyapatite Facilely Trigger Self-cure of 10-MDP Based Adhesives

The present work aims to investigate if a novel self-cure system, mediated by tertiary amine ethyl 4-(dimethylamino)-benzoate (4E) and tooth mineral hydroxyapatite (HAp), would trigger polymerization of model adhesives based on a popular self-etch monomer, 10- methacryloyloxydecyl dihydrogen phosphate (10-MDP). The effect of 4E and HAp contents on degree of conversion (DC), polymerization rate (Rp), and induction period (IP) was investigated. The occurrence of such self-cure phenomenon in adhesives that underwent prior inadequate light cure was also evaluated. Model self-etch adhesives were prepared by using a monomer mixture of 10-MDP with 2-hydroxyethyl methacrylate at1:1 wt. ratio. 4E (0.3-1.3 wt%), and HAp (0.5-2 wt%) were added to the mixture. Benzoylperoxide and N,N-dihydroxyethyl-p-toluidine were used as conventional chemical-cure system, and trimethylbenzoyl-diphenylphosphine oxide as light-curing photoinitiator. The polymerization processes and mechanical properties of model adhesives were evaluated by real time ATR/FT-IR and nanoindentation, respectively. The 4E- HAp system successfully triggered self-cure of 10-MDP based model adhesives. DC, Rp and IP were apparently affected by both 4E and HAp contents. DC of self-cure of the model adhesives was much higher than that of the conventional chemical-cure system. 4E-HAp initiated self-cure further boosted DC to ~100% regardless of prior light exposure, and significantly improved elastic modulus and hardness, thus provided a novel polymerization method to effectively salvage curing of the adhesives after inadequate light-cure.

S. mansoni Trapping in Lungs Contributes to Resistance to Reinfection

Worm transplantation studies show that physiological and reproductive status of the worm is influenced by the microenvironment of the host and critical for vaccine design. Worm migration studies in rats with ⁷⁵Se-methionine labeled cercariae demonstrated that resistance to reinfection (R/R) requires a host immune response resulting in worm death. In permissive hosts, inflammation due to anti eggs immunity leads to host death, whereas in non-permissive hosts this is not the case due to reduced egg burdens. Eggs-induced pathology and inflammatory debris resulting from immune attack on worms are important for vaccine design. Protective immune responses are perhaps induced when naïve hosts are vaccinated with either schistosome-derived molecules or attenuated cercariae as suggested by the induction of protective anti-parasite antibodies and monoclonals. However, these immunological strategies rarely produce 85–90% R/R as is achievable by portal-caval shunting. Alternatively, induction of anti-schistosoma immunity may induce portacaval shunting, seems highly unlikely although not yet tested. Differential screening with sera from twice-infected rats, protective (F2x) from Fisher vs. non-protective (W2x) from Wistar–Furth rats, was used to identify candidate vaccine antigens.