Biological monitoring as a useful tool for the detection of a coal-tar contamination in bitumen-exposed workers

In our research project entitled "Chemical irritative and/or genotoxic effect of fumes of bitumen under high processing temperatures on the airways," 73 mastic asphalt workers exposed to fumes of bitumen and 49 construction nonexposed workers were analyzed and compared with respect to polycyclic aromatic hydrocarbons (PAHs) exposure and exposure-related health effects. In order to assess the internal exposure the monohydroxylated metabolites of pyrene, 1- hydroxypyrene (1-OHP), and phenanthrene, 1-, 2- and 9-, and 3- and 4-hydroxyphenanthrene (OHPH) were determined in pre- and post-shift urinary samples. Significantly higher concentrations 1-OHP and OHPH were detected in the post-shift urine samples of 7 mastic asphalt workers working on the same construction site compared to the reference workers and all other 66 mastic asphalt workers. The adjusted mean OHPH in the reference, 66 mastic worker, and 7 worker subgroups was 1022, 1544, and 12919 ng/g creatinine (crn) respectively, indicating a marked rise in the 7 worker subgroup. In addition, there was a more than 12-fold increase of PAH metabolites from pre- to post-shift in these 7 workers, whereas in the other mastic asphalt workers there was only a twofold rise in PAH-metabolite concentration between pre- and post-shift values. The analysis of a drilling core from the construction site of the seven workers led to the detection of the source for this marked PAH exposure during the working shift as being coal tar plates, which were, without knowledge of the workers and coordinators, the underground material of the mastic asphalt layer. The evaluation of the stationary workplace concentration showed enhanced levels of phenanthrene, pyrene, fluorene, anthracene, and acenaphthene during working shifts at the construction site of these seven workers. Our study shows that biological monitoring is also a useful tool for the detection of unrecognized sources with high PAH concentrations.

Application of liquid chromatography–mass spectrometry to biomonitoring of exposure to industrial chemicals

Recent advances on biomarker research are discussed, primarily relying on experience gained with technologies based on liquid chromatography-tandem mass spectrometry (LC-MS-MS). Determination of urinary metabolites of industrial chemicals (n-hexane, benzene, toluene, and styrene) in samples from occupationally exposed workers and controls was performed by LC-MS-MS with either electrospray (ESI) or atmospheric pressure chemical ionization (APCI), as appropriate. Both phase I and II metabolites (glucuronides, sulfates, and mercapturic acids) can be detected with little or no sample manipulation, thus allowing the identification of a number of artifacts and "new" metabolites. However, experimental evidence indicates the need for properly addressing the matrix effect, which is always associated with the analysis of biological samples. Both efficient sample preparation and the use of isotopically labeled internal standards seem to be necessary to develop validated quantitative methods.

Solid-phase microextraction of monocyclic aromatic amines from biological fluids

A solid-phase microextraction (SPME) protocol was developed for the quantitative analysis of monocyclic aromatic amines from biological fluids. The headspace SPME sampling technique was optimized for extraction and concentration of five target analytes (aniline, o-toluidine, 2-chloroaniline, 2,6-dimethylaniline, 2,4,6-trimethylaniline) from urine, blood, and milk. The temperature, pH, and ionic strength of the matrix sample were modified to allow maximum adsorption of the analytes onto the SPME fiber. This method is rapid yet sensitive and can be completed in 15 min on a 5-mL sample. SPME/GC/MS analysis yielded good reproducibility (RSD > 11%) for each analyte from urine, blood, and milk. Method detection limits for the various biological fluids were determined and ranged from 0.40 ppb for 2,4,6-trimethylaniline in urine to 7.7 ppb for aniline in blood. This SPME sampling protocol can be applied to the biomonitoring of monocyclic aromatic amines from occupational, environmental, and medical exposure.

Environmental and urinary reference values as markers of exposure to hydrocarbons in urban areas

A study using individual dosimetry to evaluate the daily inhaled dose of sixteen aromatic and aliphatic hydrocarbons in three groups of primary school children, living in three Italian towns with 50,000 inhabitants or less, (Treviglio-Lombardy; Poggibonsi-Tuscany; Valenza-Piedmont) is presented. The simultaneous use of two passive samplers (radial diffusion) for each child, for a 24 h period, determined both the indoor and indoor + outdoor environmental reference concentrations. We measured the urinary levels of benzene, toluene, ethylbenzene and xylenes for each child and hence determined the urinary reference values for BTEX. We also considered the possibility of using benzene in urine as a biomarker of environmental exposure of the general population to this xenobiotic. We evaluated how both the environmental and biological measures were influenced by the presence of smokers in the surveyed children's houses. For the group of children living in Poggibonsi, we considered the influence of the living area and the traffic density on environmental concentrations of benzene (indoor and indoor + outdoor).

Determination of low level exposure to volatile aromatic hydrocarbons and genotoxic effects in workers at a styrene plant

OBJECTIVES

Low exposures to volatile aromatic hydrocarbons and cytogenetic effects in peripheral white blood cells were determined in 25 healthy workers employed in different areas of a styrene production plant in the former German Democratic Republic. The results were compared with 25 healthy unexposed controls (matched for age and sex) employed in the same company.

METHODS

The concentrations of aromatic hydrocarbons determined from active air sampling in all areas of the factory (styrene: 73-3540 micrograms/m3 (< 0.01-0.83 ppm); ethylbenzene 365-2340 micrograms/m3 (0.08-0.53 ppm); benzene 73-3540 micrograms/m3 ( < 0.02-1.11 ppm); toluene 54-2960 micrograms/m3 (0.01-0.78 ppm); xylenes 12-94 micrograms/m3 ( < 0.01-0.02 ppm)) were considerably lower than in the pump house ( > 4000 micrograms/m3 styrene, ethylbenzene, benzene, and toluene; > 500 micrograms/m3 xylenes), which was only intermittently occupied for short periods. Passive personal monitoring, biomonitoring of exhaled air and metabolites (mandelic, phenylglyoxylic, trans, trans-muconic, hippuric, o-, m- and p-methylhippuric acids, and phenol) in urine samples collected before and after an eight hour working shift was used to assess individual exposure. Questionnaires and examination of company records showed that the historical exposure was far higher than that measured. Genotoxic monitoring was performed by nuclease P1-enhanced 32P-postlabelling of DNA adducts in peripheral blood monocytes, and DNA single strand breaks, sister chromatid exchange, and micronuclei in lymphocytes. The content of kinetochores in the micronuclei was determined by immunofluorescence with specific antibodies from the serum of CREST patients.

RESULTS

No genotoxic effects related to exposure were detected by DNA adducts or DNA single strand breaks and sister chromatid exchange. The only effect related to exposure was an increase in kinetochore positive micronuclei in peripheral lymphocytes; the frequency of total micronuclei in peripheral lymphocytes did not change. Smoking was confirmed by measurement of plasma cotinine, and no confounding effect was found on any of the cytogenetic variables.

CONCLUSIONS

Low occupational exposure to styrene, benzene, and ethylbenzene did not induce alterations of genotoxicological variables except kinetochore positive micronuclei. This is the first reported use of the CREST technique for an in vivo study in occupational toxicology, which thus could serve as a valuable and sensitive technique for toxicogenic monitoring.

Determination of aromatic hydrocarbons and their metabolites in human blood and urine

Methods for the biological monitoring of aromatic hydrocarbons and their metabolites in the human blood and urine are reviewed. For the determination of the unchanged aromatic hydrocarbon in blood, gas chromatographic head-space analysis is recommended. The metabolites can be monitored by photometric, thin-layer chromatographic, high-performance liquid chromatographic and gas chromatographic methods. For the assessment of health risks caused by aromatic hydrocarbons, reference values and occupational limit values, expressed as biological tolerance values and biological exposure indices, have to be considered.

Detection and identification of volatile substances by headspace capillary gas chromatography to aid the diagnosis of acute poisoning

Headspace gas chromatography with split flame-ionization-electron-capture detection is a simple method of screening for a wide range of volatile substances in biological fluids. A 60 m x 0.53 mm i.d. thick-film (5 microns) fused-silica capillary coated with SPB-1 (Supelchem) with split flame-ionization-electron-capture detection provides a valuable alternative to packed columns in this work. Most commonly abused compounds, including many with very low boiling-points such as bromochlorodifluoromethane (BCF), butane, dimethyl ether, FC 11, FC 12, isobutane and propane, can be retained and differentiated at an initial column temperature of 40 degrees C followed by programming to 200 degrees C. The total analysis time is 26 min. Retention and detector response data were generated for 244 compounds. Good peak shapes are obtained for polar analytes such as ethanol and injections of up to 0.30 cm3 of headspace can be performed with no discernable loss of efficiency. The sensitivity is thus at least as good as that attainable with packed columns. Of the commonly encountered compounds, only isobutane-methanol and paraldehyde-toluene are at all difficult to differentiate. Quantitative measurements can be performed either isothermally or by using the temperature programme.