1
|
Multidisciplinary approach to a subgingivally fractured incisor tooth: A case report. J Dent Sci 2017; 12:190-194. [PMID: 30895047 PMCID: PMC6395251 DOI: 10.1016/j.jds.2012.09.019] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/30/2011] [Revised: 04/05/2011] [Indexed: 11/16/2022] Open
Abstract
This case report describes a multidisciplinary approach using orthodontic forced eruption to facilitate prosthetic restoration of a subgingivally fractured maxillary permanent central incisor. A 14-year-old male patient presented at the pediatric dental clinic due to unesthetic appareance and for management of a fractured maxillary right central incisor tooth. Intraoral examination revealed that the maxillary right central incisor had sustained a crown-root fracture with pulp exposure. We treated the tooth endodontically and performed orthodontic root extrusion with a modified Hawley appliance prior to prosthetic rehabilitation. Approximately 2-3 mm of extrusion of the tooth was obtained within 8 weeks. A fiber post was then inserted into the root canal, and final restoration was completed with an all-ceramic crown. Follow-up 18 months after treatment revealed good periodontal health, esthetics and normal function.
Collapse
|
2
|
Determining the localization of premolar zenith positions according to the gingival line. Niger J Clin Pract 2015; 18:273-5. [PMID: 25666006 DOI: 10.4103/1119-3077.151066] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/04/2022]
Abstract
BACKGROUND The gingival zenith (GZ) positions according to a reference line in the premolar (PM) area remain concern, especially for the clinicians in placing the gingival contours during surgery. OBJECTIVES The objectives of this study are to determine the maxillary PM GZ positions according to GZ line (GZL). MATERIALS AND METHODS A sample population of 63 patients with healthy gingival tissue was studied. The GZ was determined at the most apical point of the gingival marginal scallop. A horizontal-zenith line (ZL) was drawn connecting the GZ from the ipsilateral canine (C) and central incisor teeth. Reference lines were drawn, and bilateral measurements were taken in the respective stone casts in the PM area. RESULTS No statistically significant differences were found between bilateral first premolars (FPM) and second premolars (SPM). When considering ipsilateral FPM and SPM, statistically significant differences were found between them. For all PM teeth, the mean distance value of GZ to GZL was approximately 1.32 mm. CONCLUSIONS The present study results showed that GZs of FPM and SPM teeth for both left and right sight was coronally located according to ZL.
Collapse
|
3
|
Abstract
The aim of this technique report was to present a procedure for removal of a fractured implant abutment screw. Whatever the cause, when an abutment fracture has occurred, the fractured screw segment inside the implant must be removed. The methods used by the clinicians may include the use of an endo-explorer self-made screwdriver and the use of implant repair kit available for some implant systems. The advantage of the presented method is that it may be extended to other implant systems that do not have a special repair kit and also that the technique is simple and does not require special equipment.
Collapse
|
4
|
A technique to facilitate the fabrication of provisional restorations for ITI solid abutments. J ORAL IMPLANTOL 2012; 38:629-31. [PMID: 23072261 DOI: 10.1563/aaid-joi-d-09-00139] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/22/2022]
Abstract
The aim of this technique report was to present a procedure for the fabrication of provisional restorations for ITI solid abutments using impression caps in the laboratory with a number of advantages over intraoral techniques. There may be no need for cementation, and elimination of cementation may assist tissue healing.
Collapse
|
5
|
Effects of different acids and etching times on the bond strength of glass fiber-reinforced composite root canal posts to composite core material. QUINTESSENCE INTERNATIONAL (BERLIN, GERMANY : 1985) 2012; 43:e1-e8. [PMID: 22259812] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 05/31/2023]
Abstract
OBJECTIVE To investigate the effects of different acids and etching times on the bond strength of glass fiber-reinforced composite (FRC) posts to composite core material. METHOD AND MATERIALS Twenty-six FRC posts (FRC Postec Plus) were randomly divided into 13 groups (each n = 2). One group received no surface treatment (control). The posts in the other groups were acid etched with 35% phosphoric acid and 5% and 9.6% hydrofluoric acid gel for four different etching times (30, 60, 120, and 180 seconds). A cylindric polytetrafluoroethylene mold was placed around the treated posts and filled with dual-cure composite core material (MultiCore Flow). All samples were light cured for 60 seconds. After 24 hours of water storage, the specimens were sectioned perpendicularly to the bonded interface under water cooling to obtain 2-mm post-and-core specimens. Eight specimens were made from each group. Push-out tests were performed at a crosshead speed of 0.5 mm/min using a universal testing machine. Data were analyzed by one-way ANOVA followed by the Tukey honestly significant difference test (alpha = .05). RESULTS The lowest bond strength was observed in the control group (12.51 megapascal [MPa]). No statistical significant difference was observed among group H5-120 (20.31 MPa), group H9-120 (20.55 MPa), or group P-180 (20.57 MPa) (P > .05). These groups demonstrated the highest bond strength values (P < .05). CONCLUSION For the FRC posts, all acid-etching procedures tested showed significantly increased bond strength when compared with the control group. Acid-etching with 5% hydrofluoric acid and 9.6% hydrofluoric acid for 2 minutes and with 35% phosphoric acid for 3 minutes (groups H5-120, H9-120, and P-180, respectively) demonstrated the highest bond strength values between the FRC post and composite core material. Although the bond strength was increased by prolonged acid etching, the microstructure of the FRC posts might have been damaged.
Collapse
|
6
|
Effects of air-polishing powders on color stability of composite resins. J Appl Oral Sci 2011; 19:505-10. [PMID: 21922122 PMCID: PMC3984198 DOI: 10.1590/s1678-77572011005000021] [Citation(s) in RCA: 12] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/24/2009] [Revised: 04/30/2010] [Accepted: 05/25/2010] [Indexed: 11/21/2022] Open
Abstract
OBJECTIVES The purpose of this study was to investigate the effect of different air-polishing powders on the color stability of different types of composite resin restorative materials. MATERIAL AND METHODS Thirty cylindrical specimens (15×2 mm) were prepared for each of 7 composite resin restorative materials. All specimens were polished with a series of aluminum oxide polishing discs (Sof-Lex). The prepared specimens of each composite resin were randomly divided into 3 groups of 10 specimens each, for control (Group-C) and two air-powder applications (Group-CP: Cavitron Prophy-Jet; Group-PS: Sirona ProSmile prophylaxis powder). A standard air-polishing unit (ProSmile Handly) was used. All specimens were air-powdered for 10 s at 4-bar pressure. The distance of the spray nosel from the specimens was approximately 10 mm and angulation of the nosel was 90°. Specimens were stored in 100 mL of coffee (Nescafe Classic) for 24 h at 37°C. Color measurement of all specimens was recorded before and after exposure to staining agent with a colorimeter (Minolta CR-300). Color differences (∆E*) between the 2 color measurements (baseline and after 24 h storage) were calculated. The data were analyzed with a 2-way ANOVA test, and mean values were compared by the Tukey HSD test (p<0.05). RESULTS According to the 2-way ANOVA results, composite resin restorative materials, air-polishing powders, and their interaction were statistically significant (p<0.05) For Aelite Aesthetic Enemal, Filtek Z250, Grandio, CeramX Mono, and Quixfil composite resin restorative materials, no significant difference was observed between Group-PS and Group-CP (p>.05) and these groups demonstrated the highest ∆E* values. For Filtek Silorane and IntenS, the highest ∆E* values were observed in Group-PS. The lowest ∆E* values for all composite resin groups were observed in Group-C. When comparing the 7 composite resin restorative materials, Aelite Aesthetic Enemal demonstrated significantly less ∆E* values than the other composite resins tested. The highest ∆E* values were observed in Quixfil. CONCLUSION Except for Quixfil, all control groups of composite resins that were polished Sof-Lex exhibited clinically acceptable ∆E values (<3.7). Air-polishing applications increased the color change for all composite resin restorative materials tested. Composite restorations may require re-polishing after air-polishing.
Collapse
|
7
|
Effects of different surface treatments on the color stability of various dental porcelains. J Dent Sci 2011. [DOI: 10.1016/j.jds.2011.03.001] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022] Open
|
8
|
Alternative treatment procedure in the case of fractured abutment of adhesive bridge: a clinical report. J ESTHET RESTOR DENT 2011; 23:89-95. [PMID: 21477033 DOI: 10.1111/j.1708-8240.2011.00404.x] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/27/2022]
Abstract
UNLABELLED In this case report, an alternative approach was presented for treatment of coronal fracture including pulp of maxillary central incisor, one of the abutments of an adhesive bridge, by using fiber post and tooth's own fractured component. The patient was referred to our clinic with the complaint of pain from the upper right central incisor and mobility of the adhesive bridge in maxillary anterior segment. It was realized that, the upper right central incisor, one of the abutments of the adhesive bridge, had been fractured at middle thirds of the crown including the pulp chamber. After dismounting the adhesive bridge and completion of the root canal treatment, a fiber post was placed into the fractured tooth. The fractured component, adherent to adhesive bridge retainer, was concorded to the fiber post. The whole structure was cemented with adhesive resin. A 1-mm-wide groove was made along the fracture line and restored with composite resin. The patient was evaluated clinically and radiographically at 12 and 30 months after the treatment. CLINICAL SIGNIFICANCE Adhesive cementation of fractured component by supporting the remaining tooth structure with a fiber post is an inexpensive and conservative treatment alternative when the fractured component is compatible with the remaining tooth structure in cases of tooth fractures including the pulp chamber at anterior segment.
Collapse
|
9
|
Abstract
Objective The purpose of this study was to evaluate the effects of different polishing
techniques on the surface roughness of dental porcelains. Material and Methods Fifty-five cylindirical specimens (15x2 mm) were prepared for each feldspathic
(Vita VMK 95, Ceramco III) and low-fusing dental porcelain (Matchmaker).
Fifty-five specimens of machinable feldspathic porcelain blocks (Vitablocs Mark
II), (12x14x18 mm) were cut into 2-mm-thick slices (12x14 mm) with low speed saw.
The prepared specimens were divided into 11 groups (n=5) representing different
polishing techniques including control ((C) no surface treatment), glaze (G) and
other 9 groups that were finished and polished with polishing discs (Sof-Lex)
(Sl), two porcelain polishing kits (NTI (Pk), Dialite II (Di)), a diamond
polishing paste (Sparkle) (Sp), a zirconium silicate based cleaning and polishing
prophy paste (Zircate) (Zr), an aluminum oxide polishing paste (Prisma Gloss)
(Pg), and combinations of them. The surface roughness of all groups was measured
with a profilometer. The data were analyzed with a 2-way analysis of variance, and
the mean values were compared by the Tukey Honestly Significant Difference test
(α=0.05). Results For all porcelain material groups, the lowest Ra values were observed in Group Gl,
Group Sl, Group Pk, and Group Di, which were not significantly different from each
other (p>0.05).When comparing the 4 different porcelain materials, the
machinable feldspathic porcelain block group (Mark II) demonstrated statistically
significantly less Ra values than the other porcelain materials tested
(p<0.05). No significant difference was observed between the VMK 95 and Ceramco
III porcelain groups (p=0.919), also these groups demonstrated the highest Ra
values. Conclusion Subjected to surface roughness, the surfaces obtained with polishing and/or
cleaning-prophy paste materials used alone were rougher compared to the surfaces
finished using Sof-lex, Dialite, and NTI polishing kit. Polishing kits and discs
were found more effective than the polishing pastes used alone or combined use
with Sof-lex discs, thus improving surface smoothness.
Collapse
|
10
|
Pulpal blood flow changes in abutment teeth of removable partial dentures. Bosn J Basic Med Sci 2009; 9:296-300. [PMID: 20001995 DOI: 10.17305/bjbms.2009.2782] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022] Open
Abstract
The purpose of this study was to investigate the effect of tooth supported (TSD) and tooth-tissue supported (TTSD) removable partial denture wearing on pulpal blood flow (PBF) of the abutment teeth by using Laser Doppler Flowmeter (LDF). Measurements were carried out on 60 teeth of 28 patients (28 teeth and 12 patients of TTSD group, 32 teeth and 16 patients of TSD group) who had not worn any type of removable partial dentures before, had no systemic problems and were non smokers. PBF values were recorded by LDF before insertion (day 0) and after insertion of dentures at day 1, day 7 and day 30. Statistical analysis was performed by student t test and covariance analyses of repeated measurements. In the group TTSD, the mean values of PBF decreased statistically significantly at day 1 after insertion when compared with PBF values before insertion (p<0,01). There was no statistically significant difference among PBF mean values on 1st, 7th and 30th day. However, in the group TSD, there was no statistically significant difference among PBF mean values before insertion and on 1st, 7th and 30th day. In other words, PBF mean values in group TSD continued without changing statistically significant on 1st, 7th and 30th day.TTSD wearing may show negative effect on the abutment teeth due to decreasing basal PBF.
Collapse
|
11
|
Effect of filler ratio in adhesive systems on the shear bond strength of resin composite to porcelains. Oper Dent 2009; 34:299-305. [PMID: 19544819 DOI: 10.2341/08-88] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
This in vitro study evaluated the effect of six different adhesive systems on the shear bond strength of resin composite to feldspathic and low-fusing porcelains. Sixty porcelain blocks were prepared for each low-fusing (Matchmaker) and feldspathic (MVK95) porcelain specimen. After surface preparation, the porcelain specimens were divided into six groups (n = 10) for different adhesive systems (Adper Prompt L-Pop, QuadrantUnil Bond, Te-Econom, PQ1, One-StepPlus and Prime&Bond NT). After adhesive application, a universal resin composite (FiltekZ250) was condensed on the specimens. The prepared specimens were then stored in distilled water at 37 degrees C for 24 hours, then all the samples were thermal cycled 1000 times between 5 degrees C and 55 degrees C. Shear testing was performed on a universal test machine using a crosshead speed of 0.5 mm/minute. The statistical analysis of the bond strength data included two-way ANOVA. Then, the means were compared by Tukey HSD test (alpha = 0.05). The lowest bond strength was observed in Adper Prompt L-Pop. No statistically significant difference was observed between One-Step Plus and Prime&Bond NT. The highest bond strength was observed in PQ1. When low-fusing or feldspathic porcelain restorations are repaired with resin composite, self-etching adhesive systems may not be indicated. If maximum bond strength is the goal in porcelain resin bonding, adhesive systems that have a high filler ratio should be used.
Collapse
|
12
|
Effects of polishing procedures on color stability of composite resins. J Appl Oral Sci 2009; 17:108-12. [PMID: 19274395 PMCID: PMC4327586 DOI: 10.1590/s1678-77572009000200007] [Citation(s) in RCA: 43] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/18/2008] [Accepted: 09/12/2008] [Indexed: 11/22/2022] Open
Abstract
The purpose of this study was to investigate the effect of different polishing methods on color stability of posterior, universal and nanohybrid composite resin restorative materials upon exposure to a staining agent. Twenty-five specimens were prepared for each of 5 different composite resins (Filtek Z250, Filtek P60, Quadrant LC, Grandio and Filtek Supreme). Specimens were divided into 5 groups and different polishing procedures, including polishing discs (Pd), polishing discs then diamond polishing paste (PdP), polishing discs then a liquid polishing system (Biscover) (PdB), and combinations of these (PdPB) were used. Unpolished specimens served as the control (C). The specimens were stored for 48 h in a coffee solution. The color of all specimens was measured before and after exposure with a colorimeter, and total color change ∆E*) were calculated. The data were analyzed with a two-way ANOVA and the means were compared by Tukey HSD test (α=0.05). The lowest color difference was observed in the groups PdP and C, while the highest color difference was observed in PdPB, and PdB. When comparing the five different restorative materials, no significant difference was observed between FiltekP60 and FiltekZ250, and these materials demonstrated significantly less color change than Quadrant LC and the nanohybrid materials (Grandio, Filtek Supreme). The posterior (Filtek P60) and universal (Filtek Z250) composite resin restorative materials, which do not contain tetraethyleneglycol dimethacrylate (TEGDMA), were found to be less stainable than the nanohybrid (Grandio, Filtek Supreme) and universal (Quadrant LC) composite resins, which contain TEGDMA. The use of diamond polishing paste after polishing with polishing discs significantly decreased staining when compared to the groups that used polishing discs alone, for all restorative materials tested. The highest color change values were obtained for the specimens that were polished with the Biscover liquid polish system (PdB and PdPB groups).
Collapse
|
13
|
Abstract
The purpose of this study was to evaluate the discoloration of two nanohybrids, two microhybrids, and a posterior composite resin restorative material upon exposure to different drinks--namely tea, cola, coffee, red wine, and water. The colors of all specimens before and after storage in the solutions were measured by a colorimeter based on CIE Lab system, and the color differences thereby calculated. Data were analyzed by two-way analysis of variance (ANOVA) and Tukey's HSD test. According to ANOVA, the restorative material, staining agent, and their interaction were found to play a statistically significant role (P = 0.0001) in color change. Among the staining agents, water consistently showed the lowest deltaE* value for all materials, whereas red wine showed the highest deltaE* value. In other words, for all the materials tested, their color change in staining agents ranked in this increasing order: water < cola < tea < coffee < red wine. In terms of comparison among the five restorative materials, Filtek P60 and Z250 were observed to manifest less color change than the nanohybrids and Quadrant LC.
Collapse
|
14
|
Bacterial penetration after obturation with four different root canal sealers. J Endod 2006; 32:890-3. [PMID: 16934636 DOI: 10.1016/j.joen.2006.04.002] [Citation(s) in RCA: 16] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/16/2006] [Revised: 04/06/2006] [Accepted: 04/07/2006] [Indexed: 10/24/2022]
Abstract
The aim of this study was to compare bacterial penetration after obturation with lateral compaction technique using four different root canal sealers. This study was performed on 100 teeth including negative control (n = 10), positive control (n = 10), and experimental groups (n = 80). 80 teeth were randomly divided into five groups of 20 teeth each and obturated with AH 26 (A), AH Plus (AP), Sealapex (S), Ketac-Endo (K) root canal sealers. Evaluation was carried out for 60 days. After 30 days of comparing the bacterial penetration values, total penetration was observed in 85% of the Group AP, and group K, 80% of the group S, and 75% of the group A. According to the results of chi(2) test, there was no statistically significant difference observed between any groups (p > 0.05). After 60 days of comparing the bacterial penetration values, total penetration was observed in 100% of the group AP, group K, and group S and 95% of the group A. It may be concluded that under the conditions of this study, there was no difference in the bacterial penetration of the four root canal sealers tested at 30 and 60 days.
Collapse
|
15
|
Color stability of resin composites after immersion in different drinks. Dent Mater J 2006; 25:371-6. [PMID: 16916243] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/11/2023]
Abstract
The purpose of this study was to evaluate the discoloration of two nanohybrids, two microhybrids, and a posterior composite resin restorative material upon exposure to different drinks--namely tea, cola, coffee, red wine, and water. The colors of all specimens before and after storage in the solutions were measured by a colorimeter based on CIE Lab system, and the color differences thereby calculated. Data were analyzed by two-way analysis of variance (ANOVA) and Tukey's HSD test. According to ANOVA, the restorative material, staining agent, and their interaction were found to play a statistically significant role (P = 0.0001) in color change. Among the staining agents, water consistently showed the lowest deltaE* value for all materials, whereas red wine showed the highest deltaE* value. In other words, for all the materials tested, their color change in staining agents ranked in this increasing order: water < cola < tea < coffee < red wine. In terms of comparison among the five restorative materials, Filtek P60 and Z250 were observed to manifest less color change than the nanohybrids and Quadrant LC.
Collapse
|
16
|
The evaluation of vertical heights of maxillary and mandibular bones and the location of anatomic landmarks in panoramic radiographs of edentulous patients for implant dentistry. J Oral Rehabil 2006; 32:741-6. [PMID: 16159352 DOI: 10.1111/j.1365-2842.2005.01499.x] [Citation(s) in RCA: 42] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
The purpose of this study was to determine variations in the vertical height measurements in the edentulous maxilla and mandible, and to assess positions of the maxillary sinus, mandibular foramen, and the mandibular canal, which are important for implant length selection and planning using panoramic radiographs. The study sample included 346 edentulous alveolar ridges of 90 men and 83 women. Sixty-three dentate patients' panoramic radiographs were used for location of the first premolar and molar area. Panoramic radiographs were made with a Siemens Orthophos panoramic machine which had been standardized previously. All radiographs were made using a standardized manner by the same technician. Fourteen sites were measured on every panoramic radiograph whenever possible, eight sites in the maxilla and six sites in the mandible. Correlation analyses were performed between age groups and all measurements to determine if age is significant as a covariate. In order to examine the effect of gender the statistical analysis of differences between men and women was performed with Student t-test. The 5% significance level was used for statistical significancy. The height of the maxilla and the mandible in the anterior, first premolar, and first molar regions were significantly greater in men than in women. A majority of the most inferior border of the maxillary sinuses was located anterior to the first molar area (premolar regions) both in men (48.9%) and women (55.4%). Although, there was no statistically significant difference between edentulous men and women for the vertical distances from the mental foramen to the alveolar crest, and horizontal distances from mental foramen to midline, there were statistically significant differences between edentulous men and edentulous women for the vertical distances from the upper border of the mandibular canal to the alveolar crest in the first molar area. Mental foramens were located at the crest of the ridge in 7.2% of the edentulous women, and 6.7% of the edentulous men. The results of this study may guide clinicians to make primer decision of implant insertion area for implant supported prosthesis in edentulous patients.
Collapse
|
17
|
Color stability of provisional restorations. PRACTICAL PROCEDURES & AESTHETIC DENTISTRY : PPAD 2006; 18:103-4. [PMID: 16642793] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 05/08/2023]
|
18
|
Effect of acid etching time and a self-etching adhesive on the shear bond strength of composite resin to porcelain. THE JOURNAL OF ADHESIVE DENTISTRY 2006; 8:21-5. [PMID: 16536340] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 05/07/2023]
Abstract
UNLABELLED PURPOSE The purpose of this study was to evaluate the effect of different acid etching times with 9.6% hydrofluoric acid gel and two adhesive systems on shear bond strengths of resin composite to porcelain. MATERIALS AND METHODS Ninety-eight 7 x 7 x 2 mm feldspathic porcelain blocks (VMK 95, Vita) were prepared. The specimens were divided into 7 groups: 1 control (no surface treatment) and 6 groups acid etched with 9.6% hydrofluoric acid gel for different etching times, including 30 s, 30+30 s, 60 s, 60+60 s, 120 s, and 180 s. Each of the etching time groups was divided into two bonding agent (Single Bond, AdheSE) subgroups (n = 7). Microhybrid composite (Filtek Z250) was condensed using a teflon mold and light polymerized for 20 s on the porcelain specimens. The prepared specimens were then stored in distilled water at 37 degrees C for 24 h before mechanical testing. Shear testing of all groups was performed on a universal testing machine (Lloyd LRX) at a crosshead speed of 0.5 mm/min. The bond strength data were analyzed with two-way ANOVA. The means were compared using the Tukey HSD test (alpha = 0.05). RESULTS Acid etching time and bonding agent statistically significantly influenced bond strength (p < 0.05). In the Single Bond group, the bond strengths between group 0 (10.48 MPa) and Group 30 (11.17 MPa) did not differ significantly, with these groups exhibiting the lowest bond strength values. The highest bond strength in Single Bond group was observed in group 120 (15.07 MPa) and group 60+60 (15.42 MPa), which did not differ significantly from each other. In the AdheSE group, the bond strengths of group 0 (9.33 MPa) and group 30 (9.49 MPa) did not differ significantly, and these groups exhibited the lowest bond strength values. The highest bond strengths in the AdheSE subgroup were observed in group 120 (14.84 MPa) and group 60+60 (14.96 MPa), which were not significantly different. Comparing the two different adhesive systems, Single Bond exhibited higher bond strength values than did the self-etching adhesive AdheSE. CONCLUSIONS Acid etching of porcelain with 9.6% hydrofluoric acid gel for 120 s provided adequate bond strength for composite repair with a microhybrid composite. When a porcelain restoration is repaired with composite, Single Bond adhesive should be preferred to the AdheSE self-etching adhesive system.
Collapse
|
19
|
Prosthodontic and endodontic management of a patient with skeletal class III malocclusion: a clinical report. INT J PROSTHODONT 2005; 18:163-4. [PMID: 15889667] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/02/2023]
|
20
|
Evaluation of 24-hour shear bond strength of resin composite to porcelain according to surface treatment. INT J PROSTHODONT 2005; 18:156-60. [PMID: 15889665] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/02/2023]
Abstract
PURPOSE The purpose of the present in vitro study was to examine shear bond strengths of resin composite to porcelain according to surface treatment. MATERIALS AND METHODS One hundred eight feldspathic porcelain blocks were prepared. Specimens were divided into nine surface treatment groups: sandblasting with 50- or 110-microm Al2O3, acid etching with hydrofluoric acid, applying silane agent, and combinations of these treatments. Microhybrid resin composite was condensed and light cured for 40 seconds on the porcelain specimens, which were then stored in distilled water at 37 degrees C for 24 hours before mechanical testing. RESULTS The bond strengths were significantly different according to one-way ANOVA. The lowest bond strength was observed in the silane group (4.09 MPa); the highest bond strengths were observed with acid etching + silane (11.97 MPa) and sandblasting with 50-microm Al2O3 + acid etching + silane (12.34 MPa) (no significant difference between groups). CONCLUSION Acid etching with 9.6% hydrofluoric acid gel or sandblasting with 50- or 110-microm Al2O3 particles alone did not provide adequate bond strength. Silane agent was effective in increasing the shear bond strength of resin composite to porcelain after sandblasting or acid etching. Porcelain treatment with a combination of 50-microm Al2O3 air abrasion, 9.6% hydrofluoric acid, and silane agent provided higher bond strengths than treatment with any of these procedures alone.
Collapse
|
21
|
Prosthetic treatment of a patient with facioscapulohumeral muscular dystrophy: A clinical report. J Prosthet Dent 2003. [DOI: 10.1016/s0022-3913(03)00469-4] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
|
22
|
Prosthetic treatment of a patient with facioscapulohumeral muscular dystrophy: a clinical report. J Prosthet Dent 2003; 90:321-4. [PMID: 14564285 DOI: 10.1016/s0022391303004694] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/27/2023]
Abstract
Facioscapulohumeral muscular dystrophy syndrome (FSHD) is a rare hereditary myopathy characterized by muscle atrophy and weakness, particularly in the face and upper arms. Patients may also exhibit dental malocclusions. This article presents the prosthodontic treatment for an 18-year old male with FSHD.
Collapse
|