Iron oxide nanoparticles for treatment and diagnosis of chronic inflammatory diseases: A systematic review

Chronic inflammatory conditions are among the most prevalent diseases worldwide. Several debilitating diseases such as atherosclerosis, inflammatory bowel disease, rheumatoid arthritis, and Alzheimer's are linked to chronic inflammation. These conditions often develop into complex and fatal conditions, making early detection and treatment of chronic inflammation crucial. Current diagnostic methods show high variability and do not account for disease heterogeneity and disease-specific proinflammatory markers, often delaying the disease detection until later stages. Furthermore, existing treatment strategies, including high-dose anti-inflammatory and immunosuppressive drugs, have significant side effects and an increased risk of infections. In recent years, superparamagnetic iron oxide nanoparticles (SPIONs) have shown tremendous biomedical potential. SPIONs can function as imaging modalities for magnetic resonance imaging, and as therapeutic agents due to their magnetic hyperthermia capability. Furthermore, the surface functionalization of SPIONs allows the detection of specific disease biomarkers and targeted drug delivery. This systematic review explores the utility of SPIONs against chronic inflammatory disorders, focusing on their dual role as diagnostic and therapeutic agents. We extracted studies indexed in the Web of Science database from the last 10 years (2013-2023), and applied systematic inclusion criteria. This resulted in a final selection of 38 articles, which were analyzed for nanoparticle characteristics, targeted diseases, in vivo and in vitro models used, and the efficacy of the therapeutic or diagnostic modalities. The results revealed that ultrasmall SPIONs are excellent for imaging arterial and neuronal inflammation. Furthermore, novel therapies using SPIONs loaded with chemotherapeutic drugs show promise in the treatment of inflammatory diseases. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies Diagnostic Tools > In Vivo Nanodiagnostics and Imaging.

Synergistic stabilization of emulsion gel by nanoparticles and surfactant enables 3D printing of lipid-rich solid oral dosage forms

Pharmaceutical formulation of oral dosage forms is continuously challenged by the low solubility of new drug candidates. Pickering emulsions, emulsions stabilized with solid particles, are a promising alternative to surfactants for developing long-term stable emulsions that can be tailored for controlled release of lipophilic drugs. In this work, a non-emulsifying lipid-based formulation (LBF) loaded with fenofibrate was formulated into an oil-in-water (O/W) emulsion synergistically stabilized by stearic acid and silica (SiO2) nanoparticles. The emulsion had a droplet size of 341 nm with SiO2 particles partially covering the oil-water interface. In vitro lipid digestion was faster for the emulsion compared to the corresponding LBF due to the larger total surface area available for digestion. Cellulose biopolymers were added to the emulsion to produce a gel for semi-solid extrusion (SSE) 3D printing into tablets. The emulsion gel showed suitable rheological attributes for SSE, with a trend of higher viscosity, yield stress, and storage modulus (G'), compared to a conventional self-emulsifying lipid-based emulsion gel. The developed emulsion gel allows for a non-emulsifying LBF to be transformed into solid dosage forms for rapid lipid digestion and drug release of a poorly water-soluble drug in the small intestine.

Magnetoresponsive fluorescent core-shell nanoclusters for biomedical applications

Nowadays, superparamagnetic iron oxide nanoparticles (SPIONs) have a dominant role in many subfields of biomedicine. Owing to their peculiar properties, they can be employed for magnetic separation, drug delivery, diagnostics, and hyperthermia treatments. However, these magnetic nanoparticles (NPs) suffer from low unit magnetization due to size constraints (up to 20-30 nm) to exhibit superparamagnetic character. In this work, we have designed and synthesized superparamagnetic nanoclusters (SP-NCs) with diameters of up to 400 nm with high unit magnetization for enhanced loading capacity. These were synthesized with conventional or microwave-assisted solvothermal methods, in the presence of either of the two biomolecules (citrate or l-lysine) as the capping agent. Primary particle size, SP-NC size, surface chemistry, and the resultant magnetic properties were observed to be significantly influenced by the choice of synthesis route and capping agent. Selected SP-NCs were then coated with a fluorophore-doped silica shell to provide fluorescence properties, in the near-infrared spectrum region, while silica provided high chemical and colloidal stability. Heating efficiency studies were performed under alternating magnetic field on the synthesized SP-NCs, highlighting their potential in hyperthermia treatment. We envision that their enhanced magnetically-active content, fluorescence, magnetic property, and heating efficiency will pave the way to more effective uses in biomedical applications.

Hyperthermia-Induced In Situ Drug Amorphization by Superparamagnetic Nanoparticles in Oral Dosage Forms

Superparamagnetic iron oxide nanoparticles (SPIONs) generate heat upon exposure to an alternating magnetic field (AMF), which has been studied for hyperthermia treatment and triggered drug release. This study introduces a novel application of magnetic hyperthermia to induce amorphization of a poorly aqueous soluble drug, celecoxib, in situ in tablets for oral administration. Poor aqueous solubility of many drug candidates is a major hurdle in oral drug development. A novel approach to overcome this challenge is in situ amorphization of crystalline drugs. This method facilitates amorphization by molecular dispersion of the drug in a polymeric network inside a tablet, circumventing the physical instability encountered during the manufacturing and storage of conventional amorphous solid dispersions. However, the current shortcomings of this approach include low drug loading, toxicity of excipients, and drug degradation. Here, doped SPIONs produced by flame spray pyrolysis are compacted with polyvinylpyrrolidone and celecoxib and exposed to an AMF in solid state. A design of experiments approach was used to investigate the effects of SPION composition (Zn_0.5Fe_2.5O₄ and Mn_0.5Fe_2.5O₄), doped SPION content (10-20 wt %), drug load (30-50 wt %), and duration of AMF (3-15 min) on the degree of drug amorphization. The degree of amorphization is strongly linked to the maximum tablet temperature achieved during the AMF exposure (r = 0.96), which depends on the SPION composition and content in the tablets. Complete amorphization is achieved with 20 wt % Mn_0.5Fe_2.5O₄ and 30 wt % celecoxib in the tablets that reached the maximum temperature of 165.2 °C after 15 min of AMF exposure. Furthermore, manganese ferrite exhibits no toxicity in human intestinal Caco-2 cell lines. The resulting maximum solubility of in situ amorphized celecoxib is 5 times higher than that of crystalline celecoxib in biorelevant intestinal fluid. This demonstrates the promising capability of SPIONs as enabling excipients to magnetically induce amorphization in situ in oral dosage forms.

Utilizing Laser Activation of Photothermal Plasmonic Nanoparticles to Induce On-Demand Drug Amorphization inside a Tablet

Poor aqueous drug solubility represents a major challenge in oral drug delivery. A novel approach to overcome this challenge is drug amorphization inside a tablet, that is, on-demand drug amorphization. The amorphous form is a thermodynamically instable, disordered solid-state with increased dissolution rate and solubility compared to its crystalline counterpart. During on-demand drug amorphization, the drug molecularly disperses into a polymer to form an amorphous solid at elevated temperatures inside a tablet. This study investigates, for the first time, the utilization of photothermal plasmonic nanoparticles for on-demand drug amorphization as a new pharmaceutical application. For this, near-IR photothermal plasmonic nanoparticles were tableted together with a crystalline drug (celecoxib) and a polymer (polyvinylpyrrolidone). The tablets were subjected to a near-IR laser at different intensities and durations to study the rate of drug amorphization under each condition. During laser irradiation, the plasmonic nanoparticles homogeneously heated the tablet. The temperature was directly related to the rate and degree of amorphization. Exposure times as low as 180 s at 1.12 W cm^-2 laser intensity with only 0.25 wt % plasmonic nanoparticles and up to 50 wt % drug load resulted in complete drug amorphization. Therefore, near-IR photothermal plasmonic nanoparticles are promising excipients for on-demand drug amorphization with laser irradiation.

Proteomics-Informed Identification of Luminal Targets For In Situ Diagnosis of Inflammatory Bowel Disease

Inflammatory bowel disease (IBD) is a chronic condition resulting in impaired intestinal homeostasis. Current practices for diagnosis of IBD are challenged by invasive, demanding procedures. We hypothesized that proteomics analysis could provide a powerful tool for identifying clinical biomarkers for non-invasive IBD diagnosis. Here, the global intestinal proteomes from commonly used in vitro and in vivo models of IBD were analyzed to identify apical and luminal proteins that can be targeted by orally delivered diagnostic agents. Global proteomics analysis revealed upregulated plasma membrane proteins in intestinal segments of proximal- and distal colon from dextran sulfate sodium-treated mice and also in inflamed human intestinal Caco-2 cells pretreated with pro-inflammatory agents. The upregulated colon proteins in mice were compared to the proteome of the healthy ileum, to ensure targeting of diagnostic agents to the inflamed colon. Promising target proteins for future investigations of non-invasive diagnosis of IBD were found in both systems and included Tgm2/TGM2, Icam1/ICAM1, Ceacam1/CEACAM1, and Anxa1/ANXA1. Ultimately, these findings will guide the selection of appropriate antibodies for surface functionalization of imaging agents aimed to target inflammatory biomarkers in situ.

Emulsions Stabilized by Chitosan-Modified Silica Nanoparticles: pH Control of Structure-Property Relations

In food-grade emulsions, particles with an appropriate surface modification can be used to replace surfactants and potentially enhance the stability of emulsions. During the life cycle of products based on such emulsions, they can be exposed to a broad range of pH conditions and hence it is crucial to understand how pH changes affect stability of emulsions stabilized by particles. Here, we report on a comprehensive study of the stability, microstructure, and macroscopic behavior of pH-controlled oil-in-water emulsions containing silica nanoparticles modified with chitosan, a food-grade polycation. We found that the modified colloidal particles used as stabilizers behave differently depending on the pH, resulting in unique emulsion structures at multiple length scales. Our findings are rationalized in terms of the different emulsion stabilization mechanisms involved, which are determined by the pH-dependent charges and interactions between the colloidal building blocks of the system. At pH 4, the silica particles are partially hydrophobized through chitosan modification, favoring their adsorption at the oil-water interface and the formation of Pickering emulsions. At pH 5.5, the particles become attractive and the emulsion is stabilized by a network of agglomerated particles formed between the droplets. Finally, chitosan aggregates form at pH 9 and these act as the emulsion stabilizers under alkaline conditions. These insights have important implications for the processing and use of particle-stabilized emulsions. On one hand, changes in pH can lead to undesired macroscopic phase separation or coalescence of oil droplets. On the other hand, the pH effect on emulsion behavior can be harnessed in industrial processing, either to tune their flow response by altering the pH between processing stages or to produce pH-responsive emulsions that enhance the functionality of the emulsified end products.

Robust identification of metabolic control for microbial l-methionine production following an easy-to-use puristic approach

The identification of promising metabolic engineering targets is a key issue in metabolic control analysis (MCA). Conventional approaches make intensive use of model-based studies, such as exploiting post-pulse metabolic dynamics after proper perturbation of the microbial system. Here, we present an easy-to-use, purely data-driven approach, defining pool efflux capacities (PEC) for identifying reactions that exert the highest flux control in linear pathways. Comparisons with linlog-based MCA and data-driven substrate elasticities (DDSE) showed that similar key control steps were identified using PEC. Using the example of l-methionine production with recombinant Escherichia coli, PEC consistently and robustly identified main flux controls using perturbation data after a non-labeled ¹²C-l-serine stimulus. Furthermore, the application of full-labeled ¹³C-l-serine stimuli yielded additional insights into stimulus propagation to l-methionine. PEC analysis performed on the ¹³C data set revealed the same targets as the ¹²C data set. Notably, the typical drawback of metabolome analysis, namely, the omnipresent leakage of metabolites, was excluded using the ¹³C PEC approach.

Pickering and Network Stabilization of Biocompatible Emulsions Using Chitosan-Modified Silica Nanoparticles

Edible solid particles constitute an attractive alternative to surfactants as stabilizers of food-grade emulsions for products requiring a long-term shelf life. Here, we report on a new approach to stabilize edible emulsions using silica nanoparticles modified by noncovalently bound chitosan oligomers. Electrostatic modification with chitosan increases the hydrophobicity of the silica nanoparticles and favors their adsorption at the oil-water interface. The interfacial adsorption of the chitosan-modified silica particles enables the preparation of oil-in-water emulsions with small droplet sizes of a few micrometers through high-pressure homogenization. This approach enables the stabilization of food-grade emulsions for more than 3 months. The emulsion structure and stability can be effectively tuned by controlling the extent of chitosan adsorption on the silica particles. Bulk and interfacial rheology are used to highlight the two stabilization mechanisms involved. Low chitosan concentration (1 wt % with respect to silica) leads to the formation of a viscoelastic film of particles adsorbed at the oil-water interface, enabling Pickering stabilization of the emulsion. By contrast, a network of agglomerated particles formed around the droplets is the predominant stabilization mechanism of the emulsions at higher chitosan content (5 wt % with respect to silica). These two pathways against droplet coalescence and coarsening open up different possibilities to engineer the long-term stabilization of emulsions for food applications.

Highly scalable production of uniformly-coated superparamagnetic nanoparticles for triggered drug release from alginate hydrogels

Large-scale production of SiO₂-coated Fe₂O₃nanoparticles facilitates their incorporation in stimuli-responsive superparamagnetic alginate hydrogel structures with efficient hyperthermia performance and enhanced triggered drug release.

Flow-through cross-polarized imaging as a new tool to overcome the analytical sensitivity challenges of a low-dose crystalline compound in a lipid matrix

Assessing the physical state of a low-dose active compound in a solid lipid or polymer matrix is analytically challenging, especially if the matrix exhibits some crystallinity. The aim of this study was first to compare the ability of current methods to detect the presence of a crystalline model compound in lipid matrices. Subsequently, a new technique was introduced and evaluated because of sensitivity issues that were encountered with current methods. The new technique is a flow-through version of cross-polarized imaging in transmission mode. The tested lipid-based solid dispersions (SDs) consisted of β-carotene (BC) as a model compound, and of Gelucire 50/13 or Geleol mono- and diglycerides as lipid matrices. The solid dispersions were analyzed by (hyper) differential scanning calorimetry (DSC), X-ray powder diffraction (XRPD), and microscopic techniques including atomic force microscopy (AFM). DSC and XRPD could analyze crystalline BC at concentrations as low as 3% (w/w) in the formulations. However, with microscopic techniques crystalline particles were detected at significantly lower concentrations of even 0.5% (w/w) BC. A flow-through cross-polarized imaging technique was introduced that combines the advantage of analyzing a larger sample size with high sensitivity of microscopy. Crystals were detected easily in samples containing even less than 0.2% (w/w) BC. Moreover, the new tool enabled approximation of the kinetic BC solubility in the crystalline lipid matrices. As a conclusion, the flow-through cross-polarized imaging technique has the potential to become an indispensable tool for characterizing low-dose crystalline compounds in a lipid or polymer matrix of solid dispersions.

Nanosilver on nanostructured silica: Antibacterial activity and Ag surface area

Nanosilver is one of the first nanomaterials to be closely monitored by regulatory agencies worldwide motivating research to better understand the relationship between Ag characteristics and antibacterial activity. Nanosilver immobilized on nanostructured silica facilitates such investigations as the SiO₂ support hinders the growth of nanosilver during its synthesis and, most importantly, its flocculation in bacterial suspensions. Here, such composite Ag/silica nanoparticles were made by flame spray pyrolysis of appropriate solutions of Ag-acetate or Ag-nitrate and hexamethyldisiloxane or tetraethylorthosilicate in ethanol, propanol, diethylene glucolmonobutyl ether, acetonitrile or ethylhexanoic acid. The effect of solution composition on nanosilver characteristics and antibacterial activity against the Gram negative Escherichia coli was investigated by monitoring their recombinantly synthesized green fluorescent protein. Suspensions with identical Ag mass concentration exhibited drastically different antibacterial activity pointing out that the nanosilver surface area concentration rather than its mass or molar or number concentration determine best its antibacterial activity. Nanosilver made from Ag-acetate showed a unimodal size distribution, while that made from inexpensive Ag-nitrate exhibited a bimodal one. Regardless of precursor composition or nanosilver size distribution, the antibacterial activity of nanosilver was correlated best with its surface area concentration in solution.

Hybrid, silica-coated, Janus-like plasmonic-magnetic nanoparticles

Hybrid plasmonic-magnetic nanoparticles possess properties that are attractive in bioimaging, targeted drug delivery, in vivo diagnosis and therapy. The stability and toxicity, however, of such nanoparticles challenge their safe use today. Here, biocompatible, SiO₂-coated, Janus-like Ag/Fe₂O₃ nanoparticles are prepared by one-step, scalable flame aerosol technology. A nanothin SiO₂ shell around these multifunctional nanoparticles leaves intact their morphology, magnetic and plasmonic properties but minimizes the release of toxic Ag⁺ ions from the nanosilver surface and its direct contact with live cells. Furthermore, this silica shell hinders flocculation and allows for easy dispersion of such nanoparticles in aqueous and biological buffer (PBS) solutions without any extra functionalization step. As a result, these hybrid particles exhibited no cytotoxicity during bioimaging and remained stable in suspension with no signs of agglomeration and sedimentation or settling. Their performance as biomarkers was explored by selectively binding them with live tagged Raji and HeLa cells enabling their detection under dark-filed illumination. Therefore, these SiO₂-coated Ag/Fe₂O₃ nanoparticles do not exhibit the limiting physical properties of each individual component but retain their desired functionalities facilitating thus, the safe use of such hybrid nanoparticles in bio-applications.

Semiconductor gas sensors: dry synthesis and application

Since the development of the first chemoresistive metal oxide based gas sensors, transducers with innovative properties have been prepared by a variety of wet- and dry-deposition methods. Among these, direct assembly of nanostructured films from the gas phase promises simple fabrication and control and with the appropriate synthesis and deposition methods nm to μm thick films, can be prepared. Dense structures are achieved by tuning chemical or vapor deposition methods whereas particulate films are obtained by deposition of airborne, mono- or polydisperse, aggregated or agglomerated nanoparticles. Innovative materials in non-equilibrium or sub-stoichiometric states are captured by rapid cooling during their synthesis. This Review presents some of the most common chemical and vapor-deposition methods for the synthesis of semiconductor metal oxide based detectors for chemical gas sensors. In addition, the synthesis of highly porous films by novel aerosol methods is discussed. A direct comparison of structural and chemical properties with sensing performance is given.

Non-toxic dry-coated nanosilver for plasmonic biosensors

The plasmonic properties of noble metals facilitate their use for in-vivo bio-applications such as targeted drug delivery and cancer cell therapy. Nanosilver is best suited for such applications as it has the lowest plasmonic losses among all such materials in the UV-visible spectrum. Its toxicity, however, can destroy surrounding healthy tissues and thus, hinders its safe use. Here, that toxicity against a model biological system (Escherichia coli) is "cured" or blocked by coating nanosilver hermetically with a about 2 nm thin SiO₂ layer in one-step by a scalable flame aerosol method followed by swirl injection of a silica precursor vapor (hexamethyldisiloxane) without reducing the plasmonic performance of the enclosed or encapsulated silver nanoparticles (20 - 40 nm in diameter as determined by X-ray diffraction and microscopy). This creates the opportunity to safely use powerful nanosilver for intracellular bio-applications. The label-free biosensing and surface bio-functionalization of these ready-to-use, non-toxic (benign) Ag nanoparticles is presented by measuring the adsorption of bovine serum albumin (BSA) in a model sensing experiment. Furthermore, the silica coating around nanosilver prevents its agglomeration or flocculation (as determined by thermal annealing, optical absorption spectroscopy and microscopy) and thus, enhances its biosensitivity, including bioimaging as determined by dark field illumination.

Iron from nanocompounds containing iron and zinc is highly bioavailable in rats without tissue accumulation

Effective iron fortification of foods is difficult, because water-soluble compounds that are well absorbed, such as ferrous sulphate (FeSO(4)), often cause unacceptable changes in the colour or taste of foods. Poorly water-soluble compounds, on the other hand, cause fewer sensory changes, but are not well absorbed. Here, we show that poorly water-soluble nanosized Fe and Fe/Zn compounds (specific surface area approximately 190 m(2) g(-1)) made by scalable flame aerosol technology have in vivo iron bioavailability in rats comparable to FeSO(4) and cause less colour change in reactive food matrices than conventional iron fortificants. The addition of Zn to FePO(4) and Mg to Fe/Zn oxide increases Fe absorption from the compounds, and doping with Mg also improves their colour. After feeding rats with nanostructured iron-containing compounds, no stainable Fe was detected in their gut wall, gut-associated lymphatics or other tissues, suggesting no adverse effects. Nanosizing of poorly water-soluble Fe compounds sharply increases their absorption and nutritional value.

Continuous surface functionalization of flame-made TiO2 nanoparticles

Hydrophilic TiO(2) particles made in a flame aerosol reactor were converted in situ to hydrophobic ones by silylation of their surface hydroxyl groups. So the freshly formed titania aerosol was mixed with a fine spray of octyltriethoxysilane (OTES) in water/ethanol solution and functionalized continuously at high temperature. The extent of functionalization and structure of that surface layer were assessed by thermogravimetric analysis (TGA) coupled to mass spectroscopy (MS), differential scanning calorimetry (DSC), Fourier transform infrared (FTIR), and Raman spectroscopy. Product particles were characterized also by transmission electron microscopy (TEM), X-ray diffraction, and nitrogen adsorption. The influence of titania specific surface area (SSA) and OTES solution concentration on the functional group surface density was investigated. The titanium dioxide surface was covered with functional groups (up to 2.9 wt %) that were thermally stable up to 300 degrees C in air at an average density of 2 OTES/nm(2). Such surface-functionalized particle suspensions in 2-ethylhexanoic acid and xylene were stable over several weeks. In contrast, as-prepared hydrophilic TiO(2) precipitated within days in these solvents.

Development and optimization of iron- and zinc-containing nanostructured powders for nutritional applications

Reducing the size of low-solubility iron (Fe)-containing compounds to nanoscale has the potential to improve their bioavailability. Because Fe and zinc (Zn) deficiencies often coexist in populations, combined Fe/Zn-containing nanostructured compounds may be useful for nutritional applications. Such compounds are developed here and their solubility in dilute acid, a reliable indicator of iron bioavailability in humans, and sensory qualities in sensitive food matrices are investigated. Phosphates and oxides of Fe and atomically mixed Fe/Zn-containing (primarily ZnFe2O4) nanostructured powders were produced by flame spray pyrolysis (FSP). Chemical composition and surface area were systematically controlled by varying precursor concentration and feed rate during powder synthesis to increase solubility to the level of ferrous sulfate at maximum Fe and Zn content. Solubility of the nanostructured compounds was dependent on their particle size and crystallinity. The new nanostructured powders produced minimal color changes when added to dairy products containing chocolate or fruit compared to the changes produced when ferrous sulfate or ferrous fumarate were added to these foods. Flame-made Fe- and Fe/Zn-containing nanostructured powders have solubilities comparable to ferrous and Zn sulfate but may produce fewer color changes when added to difficult-to-fortify foods. Thus, these powders are promising for food fortification and other nutritional applications.

In situ coating of flame-made TiO2 particles with nanothin SiO2 films

Rutile TiO2 particles made by flame spray pyrolysis (FSP) were coated in a single step with SiO2 layers in an enclosed flame reactor. This in situ particle coating was accomplished by a hollow ring delivering hexamethyldisiloxane (HMDSO) vapor (precursor to SiO2) through multiple jets in swirl cross-flow to Al-doped nanostructured rutile TiO2 aerosol freshly made by FSP of a solution of titanium tetraisopropoxide and aluminum sec-butoxide in xylene. The as-prepared powders were characterized by (scanning) transmission electron microscopy (STEM and TEM), energy dispersive X-ray analysis, X-ray diffraction, nitrogen adsorption, electrophoretic mobility, DC plasma optical emission (DCP-OES), and Fourier transform infrared (FT-IR) spectroscopy. The coating quality was assessed further by the photocatalytic oxidation of isopropyl alcohol to acetone. The effect of HMDSO injection point and vapor concentration on product particle morphology was investigated. The titania particles were uniformly SiO2-coated with controlled and uniform thickness at a production rate of about 30 g h(-1) and exhibited limited, if any, photoactivity. In contrast, spraying and combusting equivalent mixtures of the above Si/Al/Ti precursors in the above reactor (without delivering HMDSO through the hollow ring) resulted in particles segregated in amorphous (SiO2) and crystalline (TiO2) domains which exhibited high photocatalytic activity.

High-pressure liquid dispersion and fragmentation of flame-made silica agglomerates

The influence of primary particle diameter and the degree of agglomeration of flame-made silica agglomerate suspensions in aqueous solutions is studied by high-pressure dispersion (up to 1500 bar) through a nozzle with a 125 microm inner diameter. These particles were produced (4-15 g/h) by oxidation of hexamethyldisiloxane (HMDSO) in a coflow diffusion flame reactor. Their average primary particle size (10-50 nm) and degree of agglomeration were controlled by varying the oxygen and precursor flow rates. The particles were characterized by nitrogen adsorption, electron microscopy, and small-angle X-ray scattering. Hydrodynamic stresses break up soft agglomerates and yield hard agglomerate sizes in the range of 100-180 nm, as characterized by dynamic light scattering. Soft agglomerates exhibited decreasing light scattering diameters with increasing dispersion pressure, while hard agglomerates were insensitive.