An open-source, three-dimensional growth model of the mandible

The available reference data for the mandible and mandibular growth consists primarily of two-dimensional linear or angular measurements. The aim of this study was to create the first open-source, three-dimensional statistical shape model of the mandible that spans the complete growth period. Computed tomography scans of 678 mandibles from children and young adults between 0 and 22 years old were included in the model. The mandibles were segmented using a semi-automatic or automatic (artificial intelligence-based) segmentation method. Point correspondence among the samples was achieved by rigid registration, followed by non-rigid registration of a symmetrical template onto each sample. The registration process was validated with adequate results. Principal component analysis was used to gain insight in the variation within the dataset and to investigate age-related changes and sexual dimorphism. The presented growth model is accessible globally and free-of-charge for scientists, physicians and forensic investigators for any kind of purpose deemed suitable. The versatility of the model opens up new possibilities in the fields of oral and maxillofacial surgery, forensic sciences or biological anthropology. In clinical settings, the model may aid diagnostic decision-making, treatment planning and treatment evaluation.

Diagnostic accuracy of bone SPECT and SPECT/CT imaging in the diagnosis of unilateral condylar hyperplasia: A systematic review and meta-analysis

Imaging with bone scans plays an important role in the diagnostic path of patients with unilateral condylar hyperactivity or unilateral condylar hyperplasia (UCH). The aim of this study is to perform a systematic review of the diagnostic performance of the bone SPECT and SPECT/CT scan for the diagnosis of UCH. PubMed, SCOPUS and EMBASE were searched electronically to identify diagnostic accuracy studies that assessed the diagnostic value of bone SPECT and SPECT/CT for the diagnosis of UCH, Meta-analyses were performed with Metadisc 1.4 and 2.0. A total of 14 studies, with a total number of 887 patients, were included in the qualitative analysis and 11 studies qualified for meta-analyses. The pooled sensitivity and specificity for the SPECT scan were 0.814 (95 % CI: 0.639-0.915) and 0.774 (95 % CI: 0.655-0.861), for the SPECT/CT scan these were 0.818 (95 % CI: 0.749-0.874) and 0.901 (95 % CI: 0.840-0.945). The summary receiver operating characteristics of the SPECT scan showed an area under the curve of 0.847 (95 % CI: 0.722-0.972) and that of the SPECT/CT scan was 0.928 (95 % CI: 0.876-0.980). CONCLUSION: Both bone SPECT scan and SPECT/CT scan provide a high diagnostic accuracy for UCH. The added value of the SPECT/CT scan is questionable and given the potential disadvantages of the SPECT/CT scan, including the increased radiation dose and costs, the diagnostic modality of first choice in patients with UCH should be a SPECT scan.

A review and evaluation of orthodontic brackets, molar bands and orthodontic auxiliaries during orthognathic surgery: A prospective cohort study

OBJECTIVE

The primary aim of this study was to provide a review of the types and frequency of orthodontic brackets, molar bands and orthodontic auxiliaries used for patients undergoing orthognathic surgery. The secondary aim was to evaluate the risk of failure of these items during orthognathic surgery.

METHODS

From three Dutch hospitals, 124 adult patients were included in this prospective cohort study. Five independent researchers collected the data during surgery using a specifically created data extraction form. The type of surgery, surgeon, orthodontist and type of orthodontic bracket, molar band or auxiliary were noted for each tooth. To evaluate their failure risk, the following variables were noted: failure and site; and type and cause of failure.

RESULTS

Stainless-steel brackets were the most frequently (75.8%) used bracket type seen in patients undergoing orthognathic surgery. Ceramic brackets were seen in 24.2% of the cases and were only applied in the anterior region. Molar bands were present in 58.9% of the patients and mostly with bands on the first molars in combination with bonded tubes on the second molars. In 32.2% of all cases, one or more failures were noted. One-third of all failures were described as detachment of the molar tube on the most posterior molar. Kobayashi ligatures and powerpins showed the highest risk of failure (odds ratio [OR] 3.70, 95% confidence interval [CI] = 1.91-7.15). No significant difference in failure rate was found between stainless-steel brackets, molar bands (OR 0.34, 95% CI = 0.08-1.43) and ceramic brackets (OR 0.44, 95% CI = 0.14-1.45).

CONCLUSION

Stainless-steel brackets, ceramic brackets, molar bands and surgical hooks are suitable for orthognathic cases. Kobayashi ligatures and powerpins had a significantly higher risk of failure so are not recommended for temporary intraoperative maxillomandibular fixation (TIO-MMF).

Mineralization and thickness of the condylar cortex in skeletal remains of children's mandibles: A preliminary study

OBJECTIVE

To explore the relationship between the volumetric bone mineral density (vBMD), the thickness of the condylar cortex (Tcortex) and the hemimandibular volumes (Vhemimandible) of symmetrical and asymmetrical mandibles of children.

DESIGN

The data collection consisted of 92 archeological skeletal remains of children's mandibles between 1 and 12 years old. The mandibles were digitalized with a computed tomography (CT) scan, and three dimensional models were obtained. Vhemimandible was calculated using the optimal symmetry plane. The volumes were used to calculate the asymmetry index (AI). Mandibles with an AI of ≥ 3% (N = 9) and a sample of the most symmetrical mandibles (N = 9) were selected for this research. Three groups were created: a symmetrical, an asymmetrical and a pooled group. Micro-CT was used to measure the vBMD and Tcortex in four volumes of interest. The AI was calculated for these parameters as well.

RESULTS

Significant correlations were found between the vBMD and the Tcortex in the pooled group (P < .01) and between the AI of the vBMD and the AI of the Tcortex in the pooled (P < .01) and symmetrical group (P < .05). No significant correlations were found between the vBMD and the Vhemimandible and between the respective AIs. Between the Tcortex and the Vhemimandible a significant correlation was found in the pooled and asymmetrical group.

CONCLUSION

There is a relationship between the vBMD and the Tcortex. The correlations between the Tcortex and the Vhemimandible are insufficient to draw firm conclusions. A relationship between the vBMD and Vhemimandible was not confirmed in this study.

The Dutch Version of the Orthognathic Quality of Life Questionnaire (OQLQ-NL): Validation for Cleft Patients

OBJECTIVE

The aim of this study is to validate the Dutch version of the Orthognathic Quality of Life Questionnaire (OQLQ-NL) for cleft patients who received orthognathic surgery.

METHODS

To compare the OQLQ-NL with the CLEFT-Q, we used a convenience sample of thirty-two cleft patients. Using the Cronbach's alpha coefficient for multiple item scales, internal reliabilities of the OQLQ-NL were evaluated. The OQLQ-NL was repeated at a two-week interval and the intraclass correlation coefficient was calculated, to establish of the test-retest reliability. The construct validity of the OQLQ-NL was evaluated by using Spearman's correlation to test its correlation with the CLEFT-Q.

RESULTS

Thirty-two patients filled in the OQLQ-NL and CLEFT-Q. The OQLQ-NL had excellent results in internal reliability and test-retest reliability. The vast majority of the correlations between the domains and scales of the questionnaires were as expected. Data from this study and previous studies confirm the construct validity of the OQLQ-NL.

CONCLUSION

Our results suggest the OQLQ-NL is a valid and reliable instrument for measuring quality of life in cleft patients who have received orthognathic surgery in the Netherlands.

Interrater Reliability for Classifying Craniofacial Microsomia Severity: A Call for Objective Evaluation

OBJECTIVE

The severity of craniofacial microsomia (CFM) is generally classified using the Orbit, Mandible, Ear, Soft tissue, Nerve (OMENS) classification score. The global assessment of the Phenotypic Assessment Tool for Craniofacial Microsomia (PAT-CFM), is a pictorial modification of the OMENS classification. The aim of this study was to assess the interrater reliability of the PAT-CFM global assessment score.

DESIGN

In this prospective cohort study, three clinicians completed the global assessment form of the PAT-CFM. The mandible was classified based on orthopantomogram- and/or computed tomography images.

PARTICIPANTS

Consecutive patients with CFM or microtia.

Interrater agreement was calculated using the weighted Krippendorff alpha (α), with 95% confidence intervals (CI).

RESULTS

In total, 53 patients were included (106 hemifaces). The reliabilities of the main classification components ranged from high for the mandible (α = 0.904 [95% CI 0.860-0.948]) and ear (α = 0.958 [95% CI 0.934-0.983]) subscales, to tentative for the orbital summary score (α = 0.682 [0.542-0.821]), and nerve summary score (α = 0.782 [0.666-0.900]) subscales.

CONCLUSIONS

The reliability of the ear and radiographic mandible scales of the PAT-CFM global classification were high, while the orbit, facial nerve and soft tissue subscales may have limited reliability. Research focusing on radiographic severity scores for hypoplasia of the orbits and soft tissues, as well as objective measures for overall facial hypoplasia using non-ionizing forms of imaging for early classification, are warranted.

Assessment of Surgical Accuracy in Maxillomandibular Advancement Surgery for Obstructive Sleep Apnea: A Preliminary Analysis

This retrospective study aimed to: (1) investigate the surgical accuracy of maxillomandibular advancement (MMA) in obstructive sleep apnea (OSA) patients, with a specific focus on maxillary and mandibular advancement and counter-clockwise rotation and (2) investigate the correlation between the amount of achieved advancement and the reduction in the relative apnea hypopnea index (AHI). Sixteen patients, for whom a three-dimensional virtual surgical plan was generated preoperatively and a computed tomography scan (CT) or cone-beam computer tomography (CBCT) was acquired postoperatively, were included. The postoperative CT or CBCT was compared to the virtual surgical plan, and differences in the mandibular and maxillary advancement and counter-clockwise rotation were assessed. Maxillary and mandibular advancement (median 3.1 mm, p = 0.002 and 2.3 mm, p = 0.03, respectively) and counter-clockwise rotation (median 3.7°, p = 0.006 and 4.7°, p = 0.001, respectively) were notably less than intended. A significant correlation was found between the planned maxillary advancement and the difference between the planned and actual maxillary advancement (p = 0.048; adjusted R2 = 0.1979) and also between the planned counter-clockwise rotation and the difference between the planned and actual counter-clockwise rotation for the mandible (p = 0.012; adjusted R2 = 0.3261). Neither the maxilla-first nor the mandible-first surgical sequence proved to be superior in terms of the ability to achieve the intended movements (p > 0.45). Despite a significant reduction (p = 0.001) in the apnea hypopnea index (AHI) from a median of 62.6 events/h to 19.4 events/h following MMA, no relationship was found between the extent of maxillary or mandibular advancement and AHI improvement in this small cohort (p = 0.389 and p = 0.387, respectively). This study underlines the necessity for surgeons and future research projects to be aware of surgical inaccuracies in MMA procedures for OSA patients. Additionally, further research is required to investigate if sufficient advancement is an important factor associated with MMA treatment outcome.

Evaluating International Diagnostic, Screening, and Monitoring Practices for Craniofacial Microsomia and Microtia: A Survey Study

To (1) appraise current international classification and clinical management strategies for craniofacial microsomia (CFM) and microtia, and (2) to assess agreement with the European Reference Network "European Guideline Craniofacial Microsomia" recommendations on screening and monitoring.

This was a cross-sectional online survey study. The survey consisted of 44 questions on demographics, diagnostics and classification, obstructive sleep apnea, feeding difficulties, speech and language development, hearing, ocular abnormalities, visual development, orthodontic screening, genetic counselling, psychological wellbeing, and extracraniofacial anomalies.

Respondents were participants of 3 international cleft and craniofacial conferences, members of the American Cleft Palate and Craniofacial Association and members of the International Society for Auricular Reconstruction. Respondents were requested to complete 1 questionnaire per multidisciplinary team.

Fifty-seven responses were received from 30 countries (response rate ∼3%).The International Consortium for Health Outcomes Measurement diagnostic criteria were used by 86% of respondents, though 65% considered isolated microtia a mild form of CFM. The Orbit, Mandible, Ear, Facial Nerve and Soft Tissue classification system was used by 74% of respondents. Agreement with standardized screening and monitoring recommendations was between 61% and 97%. A majority of respondents agreed with screening for extracraniofacial anomalies (63%-68%) and with genetic counselling (81%).

This survey did not reveal consistent agreement on the diagnostic criteria for CFM. Respondents mostly supported management recommendations, but frequently disagreed with the standardization of care. Future studies could focus on working towards international consensus on diagnostic criteria, and exploring internationally feasible management strategies.

Facial deformation following treatment for pediatric head and neck rhabdomyosarcoma; the difference between treatment modalities. Results of a trans-Atlantic, multicenter cross-sectional cohort study

BACKGROUND

The four different local therapy strategies used for head and neck rhabdomyosarcoma (HNRMS) include proton therapy (PT), photon therapy (RT), surgery with radiotherapy (Paris-method), and surgery with brachytherapy (AMORE). Local control and survival is comparable; however, the impact of these different treatments on facial deformation is still poorly understood. This study aims to quantify facial deformation and investigates the differences in facial deformation between treatment modalities.

METHODS

Across four European and North American institutions, HNRMS survivors treated between 1990 and 2017, more than 2 years post treatment, had a 3D photograph taken. Using dense surface modeling, we computed facial signatures for each survivor to show facial deformation relative to 35 age-sex-ethnicity-matched controls. Additionally, we computed individual facial asymmetry.

FINDINGS

A total of 173 HNRMS survivors were included, survivors showed significantly reduced facial growth (p < .001) compared to healthy controls. Partitioned by tumor site, there was reduced facial growth in survivors with nonparameningeal primaries (p = .002), and parameningeal primaries (p ≤.001), but not for orbital primaries (p = .080) All patients were significantly more asymmetric than healthy controls, independent of treatment modality (p ≤ .001). There was significantly more facial deformation in orbital patients when comparing RT to AMORE (p = .046). In survivors with a parameningeal tumor, there was significantly less facial deformation in PT when compared to RT (p = .009) and Paris-method (p = .007).

INTERPRETATION

When selecting optimal treatment, musculoskeletal facial outcomes are an expected difference between treatment options. These anticipated differences are currently based on clinicians' bias, expertise, and experience. These data supplement clinician judgment with an objective analysis highlighting the impact of patient age and tumor site between existing treatment options.

The learning curve of transoral condylectomy; a retrospective analysis of 100 consecutive cases of unilateral condylar hyperplasia

In this study, 100 consecutive scheduled transoral condylectomies for unilateral condylar hyperplasia were included. The safety and surgical performances were assessed, using the operating time, conversion rate and complication rate. The conversion rate learning curve was evaluated with a learning curve cumulative summation (LC-CUSUM). The total conversion rate was 8.0%. The LC-CUSUM for conversion signaled at the 53th procedure, indicating sufficient evidence had accumulated that the surgeon had achieved competence. For procedures 54-100, the conversion rate was 4.0%. The operating time for the transoral condylectomy was 41.5 ± 15.3 min; when a conversion was necessary, the operating time was 101.4 ± 28.3 min (p < 0.05). The estimated operating time in the post-learning phase was 37 min, this was reached after approximately 47 procedures. There was 1 major complication of a permanent inferior alveolar nerve hypoesthesia. The complication rate was not significantly decreased after the learning curve. Within the limitations of the study, it seems that transoral condylectomy for UCH is a safe procedure with several advantages over the traditional preauricular approach. Surgeons starting this procedure should be aware of the potential complications and of the learning curve of approximately 53 procedures.

Influence of Surgeon Experience on Surgical Outcome of Maxillomandibular Advancement for Obstructive Sleep Apnea

The primary aim of this study was to assess the association between clinical efficacy outcomes (i.e., polysomnography (PSG) results) of maxillomandibular advancement (MMA) and surgeons' experience. The second aim was to assess the association between the occurrence of postoperative complications of MMA and surgeons' experiences. Patients treated with MMA for moderate to severe obstructive sleep apnea (OSA) were enrolled in this retrospective study. The patient population was divided into two groups based on two different surgeons performing MMA. The associations between surgeons' experience on the one hand and PSG results and postoperative complications on the other hand were investigated. A total of 75 patients were included. There was no significant difference in baseline characteristics between the two groups. The reductions in apnea-hypopnea index and oxygen desaturation index were both significantly greater in group-B than group-A (p = 0.015 and 0.002, respectively). The overall success rate after MMA was 64.0%. There was a negative correlation between surgeon experience and surgical success (odds ratio: 0.963 [0.93, 1.00], p = 0.031). No significant association was found between surgeon experience and surgical cure. Additionally, there was no significant association between surgeon experience and the occurrence of postoperative complications. Within the limitations of this study, it is concluded that surgeon experience may have little to no influence on the clinical efficacy and safety of MMA surgery in OSA patients.

Quality of Life After Orthognathic Surgery in Patients with Cleft: An Overview of Available Patient-Reported Outcome Measures

Measuring the impact of orthognathic surgery on quality of life is of significant importance in patients with cleft deformities. Standardized tools such as patient-reported outcome measures (PROMs) are needed to fully comprehend patients' needs and perceptions. Therefore, the availability of reliable, valid, and comprehensive questionnaires for patients is essential. The aim of this study is to identify PROMs measuring the impact of orthognathic surgery on quality of life in patients with cleft deformities and to evaluate the identified PROMs.

A systematic search of the literature was performed according to the preferred reporting items for systematic reviews and meta-analysis guidelines. All validated PROMs, regarding the impact of orthognathic surgery on quality of life in patients with cleft deformities, were identified and assessed according to the quality criteria proposed for measurement properties of health status questionnaires.

An electronic search yielded 577 articles. After a full-text review of 87 articles, 4 articles met the inclusion criteria, comprising 58 PROMs. Of these 58 PROMs, 1 PROM (the CLEFT-Q) has been validated to measure the impact of orthognathic surgery on patients with a facial cleft. Evaluation of methodological quality of the included articles and assessment of the measurement properties of the CLEFT-Q show that the CLEFT-Q scores relatively good for all available measurement properties, making it suitable for immediate use.

The CLEFT-Q was found to be the only valid instrument so far to measure the impact of orthognathic surgery on the quality of life in patients with cleft deformities.

Normal variation of mandibular asymmetry in children

OBJECTIVE

To explore the normal variation of asymmetry in mandibles of children in the age group of 1 to 12 years.

MATERIALS AND METHODS

The study group consisted of 92 cadaveric mandibles of children with a dental age of 1 to 12 years old in possession of ACTA (Academic Centre for Dentistry Amsterdam), Faculty of Dentistry, the Netherlands. 3D models of the mandibles were obtained from CT-scans and hemimandibular volumes of all mandibles were calculated. The condylar height, ramus height, mandibular body length and the gonial angle were bilaterally determined using a novel landmark-based method, and the degree of asymmetry was calculated.

RESULTS

No relationship was found between dental age and asymmetry of the studied parameters (P < .05). The highest degree of asymmetry was found in the ramus height, whereas the gonial angle presented the lowest degree of asymmetry. A positive correlation was found between the asymmetry of the hemimandibular volume vs the height of the ramus (P < .05) and the length of the mandibular body (P < .05). An inverse correlation was found between the asymmetry of the ramus height vs the condylar height (P < .05), mandibular body length (P < .05) and gonial angle (P < .05).

CONCLUSIONS

Mandibular asymmetries in children did occur (9.8% of the included mandibles presented with a relevant overall asymmetry of ≥3%) and were unrelated to age. The different segments of the mandible seem to compensate for each other, in order to maintain a functional equilibrium.

Diagnostic performance of SPECT-CT imaging in unilateral condylar hyperplasia

Nuclear imaging plays an important role in the diagnostic path of patients with unilateral condylar hyperplasia (UCH). The purpose of this study was to determine the performance of single-photon emission computed tomography-computed tomography (SPECT-CT) in a large group of patients with suspected UCH. This study prospectively included 156 patients with a clinical presentation of progressive mandibular asymmetry. All patients underwent ^99 mTc-HDP SPECT-CT and extensive baseline and follow-up documentation. The relative activity of the ipsilateral condyle in relation to the contralateral condyle was calculated for both the mean and maximum count, and the diagnostic accuracy of different cut-off values was determined. The area under the receiver operating characteristic curve of the SPECT-CT scan was 0.892 for the mean count and 0.873 for the maximum count. The optimal cut-off of> 8% (SPECT-CT mean count) resulted in a sensitivity of 87.0% and a specificity of 88.6%. SPECT-CT showed good diagnostic performance in UCH; however the benefit of the CT scan is questionable and the potential disadvantages have to be weighed against the benefits when compared to standard SPECT scanning. When using SPECT-CT in the diagnostic path in UCH, a mean value cut-off of>8% for the relative activity between the condyles is most accurate.

[The 3D-printed surgical guides used during genioplasty]

Genioplasty is a seemingly simple procedure performed to correct the bony chin. The results of the procedure are, however, strongly correlated with the experience of the surgeon. 3D-printed surgical guides could act as a transfer modality to translate the preoperative planning directly into the achieved result. Prospective studies evaluating the usefulness of the 3D-printed surgical guides have not yet been carried out and consensus regarding the best design is lacking. In order to become more familiar with working with surgical guides, a genioplasty using 3D-printed surgical guides was performed. The postoperative analysis of the achieved result showed minor differences compared to preoperative planning. Surgical guides have the potential to improve the accuracy and predictability of genioplasty. The design should be further refined and the added value of the guides should be confirmed by means of prospective research.

Critical appraisal of patient-specific implants for secondary post-traumatic orbital reconstruction

In orbital reconstruction, a patient-specific implant (PSI) may provide accurate reconstruction in complex cases, since the design can be tailored to the anatomy. Several design options may be embedded, for ease of positioning and precision of reconstruction. This study describes a cohort of 22 patients treated for secondary orbital reconstruction with a PSI; one patient received two PSI. The preoperative clinical characteristics and implant design options used are presented. When compared to preoperative characteristics, the postoperative clinical outcomes showed significant improvements in terms of enophthalmos (P < 0.001), diplopia (P < 0.001), and hypoglobus (P = 0.002). The implant position in all previous reconstructions was considered inadequate. Quantitative analysis after PSI reconstruction showed accurate positioning of the implant, with small median and 90th percentile deviations (roll: median 1.3°, 90th percentile 4.6°; pitch: median 1.4°, 90th percentile 3.9°; yaw: median 1.0°, 90th percentile 4.4°; translation: median 1.4 mm, 90th percentile 2.7 mm). Rim support proved to be a significant predictor of roll and rim extension for yaw. No significant relationship between design options or PSI position and clinical outcomes could be established. The results of this study show the benefits of PSI for the clinical outcomes in a large cohort of secondary post-traumatic orbital reconstructions.

Power chains as an alternative to steel-wire ligatures in temporary maxillomandibular fixation: a pilot study

The aim of this study was to compare two techniques for temporary intraoperative maxillomandibular fixation (TIO-MMF) during orthognathic surgery: steel-wire ligatures versus power chains. Patients undergoing orthognathic surgery between October 2019 and March 2020 were included in a prospective cross-sectional study conducted in three participating hospitals. Data were collected using a standardized measurement form. A total of 44 patients were included, in whom TIO-MMF was applied 79 times. A statistically significant difference in intraoperative loss of stability of the segment relationship was found between steel-wire ligatures (11.4%) and power chains (0%). The mean application time of TIO-MMF differed significantly between steel-wire ligatures (99 seconds) and power chains (157 seconds) (P < 0.001). There was no statistical difference in occurrence of adverse events between the two techniques. This study found that the application of TIO-MMF with power chains is more stable compared to steel-wire ligatures. Steel-wire ligatures were significantly faster to apply, although the absolute difference (less than 1 minute) was small. Other possible advantages of the proposed technique are discussed. The results of this study suggest that power chains for the application of TIO-MMF in orthognathic surgery are a valuable alternative to steel-wire ligatures.

Pre-autotransplantation alveolar process augmentation and premolar autotransplantation as a treatment method for single tooth replacement in adolescents

The treatment of young patients with missing teeth and an atrophied alveolar process after trauma or agenesis of a tooth can be challenging. The aim of this study was to evaluate autotransplantation of a premolar after pre-autotransplantation alveolar process augmentation (PAPA) as a treatment option for these patients. A retrospective cohort study was implemented to analyse the PAPA procedure and subsequent autotransplantation procedure. Alveolar process augmentation was performed using different types of autologous bone grafts. Subsequent autotransplantation of one or more premolars was performed approximately 4 months later. Nine patients with a mean age of 12 years were included. Twelve premolars were transplanted after a PAPA procedure: seven in the maxillary incisor region, four in the mandibular premolar region, and one in the mandibular incisor region. Initially all transplanted teeth functioned well. However, one mandibular premolar that was transplanted in the maxillary incisor region was lost because of resorption after 6 years of follow-up. The other 11 transplanted teeth functioned well. The mean follow-up was 6 years (range 3-13 years). The results showed that autotransplantation can be facilitated by PAPA with a high chance of success. It can therefore be a valuable addition to other existing treatment options.

Surgical instrument to improve implant positioning in orbital reconstruction: a feasibility study

Adequate positioning of an orbital implant during orbital reconstruction surgery is essential for restoration of the pre-traumatised anatomy, but visual appraisal of its position is limited by the keyhole access and protruding soft tissues. A positioning instrument that attaches to the implant was designed to provide feedback outside the orbit. The goal of this study was to evaluate the accuracy of placement with the instrument and compare it with the accuracy of placement by visual appraisal. Ten orbits in five human cadaver heads were reconstructed twice: once using visual appraisal and once using the instrument workflow. No significant improvement was found for the roll (5.8° vs 3.4°, respectively, p=0.16), pitch (2.1° vs 1.5°, p=0.56), or translation (2.9 mm vs 3.3 mm, p=0.77), but the yaw was significantly reduced if the instrument workflow was used (15.3° vs 2.9°, p=0.02). The workflow is associated with low costs and low logistical demands, and may prevent outliers in implant positioning in a clinical setting when intraoperative navigation or patient-specific implants are not available.

Mirror-image unilateral condylar hyperplasia in monozygotic twins

Unilateral condylar hyperplasia (UCH) is an abnormal growth process that results in the development of mandibular asymmetry. The aetiopathogenesis of this entity is still unclear. Various factors including hormonal influences, intrauterine factors, trauma, infection, and genetics have been speculated to lead to the development of UCH. In genetic epidemiology, twins have been a valuable resource for investigating the genetic basis of complex traits and diseases. We present a case of mirror-image UCH in a pair of monozygotic twins, providing evidence of a possible genetic link for this mandibular growth disorder. The concordance in the monozygotic twins appears to be reflected by the precise mirror-image presentation of the congenital dentofacial anomalies. Further twin studies would be useful in clarifying the contributions of genetic and environmental factors to the presence and development of UCH.

Molecular basis of unilateral condylar hyperplasia?

Unilateral condylar hyperplasia (UCH) causes progressive asymmetry of the mandible. The aetiology of this growth disorder is unknown. A two-centre prospective study was established, and 10 consecutive adult UCH patients scheduled for high condylectomy were included. The resected condylar tissue was divided into two parts, one for regular histopathology and one for DNA extraction. A panel of eight selected overgrowth genes (AKT1, AKT3, MTOR, PIK3CA, PIK3R2, PTEN, TSC1, TSC2) were sequenced using next-generation sequencing, with coverage of a minimum 500 times in order to be able to detect low-grade mosaicisms. Subsequently, untargeted whole exome sequencing (WES) was performed to detect variants in other genes present in three or more patients. No mutation was detected in any of the overgrowth genes, and untargeted exome sequencing failed to detect any definitively causative variant in any other gene. Ten genes had a rare variant in three or more patients, but these cannot be designated as causative without additional functional studies. The hypothesis that the cause in at least some patients with UCH is a somatic mutation in a gene that controls cell growth could not be confirmed in this study.

Unilateral condylar hyperplasia in hemifacial hyperplasia, is there genetic proof of overgrowth?

Hemifacial hyperplasia (HFH) is characterized by an increase in volume of all affected tissues of half of the face. It is present at birth, subsequently grows proportionally, and stops growing before adulthood. Unilateral condylar hyperplasia (UCH) consists of progressive asymmetric growth of the mandible and develops typically in early adulthood. Both disorders have an unknown aetiology. The overgrowth limited to one body part suggests somatic mosaicism, as this has been found in other similar localized overgrowth disorders. Often this includes a variant in a gene in the (PIK3CA)/PI3K/(PTEN)/AKT1/mTOR pathway. Here we report the case of an HFH patient with asymmetry present at birth, in whom a progressive growth pattern similar to UCH subsequently occurred, causing marked mandibular asymmetry. A condylectomy was successfully performed to stop the progressive growth. Somatic mosaicism for a mutation in PIK3CA was detected in the condylar tissue. This finding might indicate that both HFH and UCH can be caused by variants in genes in the (PIK3CA)/PI3K/(PTEN)/AKT1/mTOR pathway, similar to other disorders that result in asymmetrical bodily overgrowth.

Implant-oriented navigation in orbital reconstruction part II: preclinical cadaver study

In orbital reconstruction, the acquired position of an orbital implant can be evaluated with the aid of intraoperative navigation. Feedback of the navigation system is only obtained after positioning of the implant: the implant's position is not tracked in real time during positioning. The surgeon has to interpret the navigation feedback and translate it to desired adjustments of the implant's position. In a previous study, a real-time implant-oriented navigation approach was introduced and the system's accuracy was evaluated. In this study, this real-time navigation approach was compared to a marker-based navigation approach in a preclinical set-up. Ten cadavers (20 orbital defects) were reconstructed twice, by two surgeons (total: 80 reconstructions). Implant positioning was significantly improved in the real-time implant-oriented approach in terms of roll (2.0° vs. 3.2°, P=0.03), yaw (2.2° vs. 3.4°, P=0.01) and translation (1.3mm vs. 1.8mm, P=0.005). Duration of the real-time navigation procedure was reduced (median 4.5 min vs. 7.5 min). Subjective appreciation of the navigation technique was higher for real-time implant-oriented navigation (mean 7.5 vs. 9.0). Real-time implant-oriented navigation feedback provides real-time, intuitive feedback to the surgeon, which leads to improved implant positioning and shortens duration of the navigation procedure.

Factors related to failure of autologous cranial reconstructions after decompressive craniectomy

PURPOSE

Cranioplasty is customary after decompressive craniectomy. Many different materials have been developed and used for this procedure. The ideal material does not yet exist, while complication rates in cranioplasties remain high. This study aimed to determine factors related to autologous bone flap failure.

MATERIALS AND METHODS

In this two-center retrospective cohort study, 276 patients underwent autologous bone cranioplasty after initial decompressive craniectomy between 2004 and 2014. Medical records were reviewed regarding patient characteristics and factors potentially related to bone flap failure. Data were analyzed using univariable and multivariable regression analysis.

RESULTS

Independent factors related to overall bone flap failure were: duration of hospitalization after decompressive craniectomy [OR: 1.012 (95%CI: 1.003-1.022); p = 0.012], time interval between decompressive craniectomy and cranioplasty [OR: 1.018 (95%CI: 1.004-1.032); p = 0.013], and follow-up duration [OR: 1.034 (95%CI: 1.020-1.047); p < 0.001]. In patients with bone flap infection, neoplasm as initial diagnosis occurred significantly more often (29.2% vs. 7.8%; RD 21.3%; 95%CI 8.4 -38.3%; NNH 5; 95%CI 3 -12) and duration of hospitalization after decompressive craniectomy tended to be longer (means 54 vs. 28 days, MD 26.2 days, 95%CI -8.6 to 60.9 days). Patients with bone flap resorption were significantly younger (35 vs. 43 years, MD 7.7 years, 95%CI 0.8-14.6 years) and their cranial defect size tended to be wider than in patients without bone flap resorption (mean circumference 39 vs. 37 cm; MD 2.4 cm, 95% CI -0.43-5.2 cm) and follow-up duration was significantly longer (44 vs. 14 months, MD 29 months, 95%CI 17-42 months).

CONCLUSION

A neoplasm as initial diagnosis, longer hospitalization after decompressive craniectomy, larger time interval between decompressive craniectomy and cranioplasty, and longer follow-up duration are associated with a higher risk of failure of autologous bone flaps for cranioplasty. Patients with these risk factors may be better served with an early recovery program after decompressive surgery or an alloplastic material for cranioplasty.

The use of cranial resection templates with 3D virtual planning and PEEK patient-specific implants: A 3 year follow-up

PURPOSE

The aim of this study was to evaluate the accuracy of resection templates in cranioplasties in order to facilitate a one-stage resection and cranial reconstruction.

PATIENTS AND METHODS

In three cases, cranial resections were combined with direct reconstructions using the principles of computer-aided design, manufacturing, and surgery. The precision of the resection template was evaluated through a distance map, comparing the planned and final result.

RESULTS

The mean absolute difference between the planned and actual reconstructed contour was less than 1.0 mm. After 3 years, no clinical signs of infection or rejection of the implants were present. The computed tomography scans showed no irregularities, and the aesthetic results remained satisfactory.

CONCLUSION

One-stage resection and cranial reconstruction using a resection template, control template, and a prefabricated patient-specific implant of poly(ether-ether-ketone) (PEEK) proved to be a viable and safe method.

Should Virtual Mirroring Be Used in the Preoperative Planning of an Orbital Reconstruction?

PURPOSE

Mirroring has been used as a diagnostic tool in orbital wall fractures for many years, but limited research is available proving the assumed symmetry of orbits. The purpose of this study was to evaluate volume and contour differences between orbital cavities in healthy humans.

MATERIALS AND METHODS

In this cross-sectional study, the left and right orbital cavities of a consecutive sample of patients' computed tomograms were measured. Inclusion criteria were patients with no sign of orbital or sinus pathology or fracture. Outcome variables were differences in volume and contour. Descriptive statistics and Student paired t test were used for data analysis of orbital volume and distance maps were used for analysis of orbital contour.

RESULTS

The sample was composed of 100 patients with a mean age of 57; 50% were men. The total mean orbital volume was 27.53 ± 3.11 mL. Mean difference between cavities was 0.44 ± 0.31 mL or 1.59% (standard deviation [SD], 1.10%). The orbital contour showed high similarity, with an absolute mean left-versus-right difference of 0.82 mm (SD, 0.23 mm).

CONCLUSION

The authors hypothesize that the measured differences between right and left orbital volumes and contours are clinically minor. In consequence, the use of mirroring tools as part of preoperative planning in orbital reconstruction is legitimate with the aim of simulating the pre-traumatized anatomy.

Natural variation of the zygomaticomaxillary complex symmetry in normal individuals

OBJECTIVE

The study aim was to investigate variations in the symmetry of the zygomaticomaxillary complex (ZMC) in normal individuals.

METHOD

Computed tomography datasets of 200 individuals without facial fractures were analyzed using a validated three-dimensional analysis technique. The absolute average distance (AD) and 90th percentile distance (NPD) were calculated, representing respectively the overall and maximum symmetry between bilateral ZMCs.

RESULTS

The mean AD and NPD of the total study group was 0.9 ± 0.3 mm (95% CI 0.3-2.3) and 1.7 ± 0.5 mm (95% CI 0.5-3.9), respectively. The mean AD and NPD in males were 1.0 ± 0.3 mm (95% CI 0.28-2.34) and 1.9 ± 0.5 mm (95% CI 0.5-3.9) versus 0.8 ± 0.3 mm (95% CI 0.4-1.7) and 1.6 ± 0.5 mm (95% CI 0.8-2.9), respectively, for females. A statistically significant difference between male and female was found for both AD and NPD (p < 0.01). The male population <40 years had a mean AD and NPD of 1.0 ± 0.3 mm and 1.8 ± 0.5 mm, which was not statistically significant when compared with males >40 years.

CONCLUSION

The naturally occurring anatomic variation in ZMC symmetry described in this study is proposed as a benchmark for evaluating the amount of preoperative displacement and postoperative reduction of ZMC in trauma cases.

Bad splits in bilateral sagittal split osteotomy: systematic review and meta-analysis of reported risk factors

An unfavourable and unanticipated pattern of the bilateral sagittal split osteotomy (BSSO) is generally referred to as a 'bad split'. Patient factors predictive of a bad split reported in the literature are controversial. Suggested risk factors are reviewed in this article. A systematic review was undertaken, yielding a total of 30 studies published between 1971 and 2015 reporting the incidence of bad split and patient age, and/or surgical technique employed, and/or the presence of third molars. These included 22 retrospective cohort studies, six prospective cohort studies, one matched-pair analysis, and one case series. Spearman's rank correlation showed a statistically significant but weak correlation between increasing average age and increasing occurrence of bad splits in 18 studies (ρ=0.229; P<0.01). No comparative studies were found that assessed the incidence of bad split among the different splitting techniques. A meta-analysis pooling the effect sizes of seven cohort studies showed no significant difference in the incidence of bad split between cohorts of patients with third molars present and concomitantly removed during surgery, and patients in whom third molars were removed at least 6 months preoperatively (odds ratio 1.16, 95% confidence interval 0.73-1.85, Z=0.64, P=0.52). In summary, there is no robust evidence to date to show that any risk factor influences the incidence of bad split.

Quantitative Assessment of Orbital Implant Position--A Proof of Concept

Introduction

In orbital reconstruction, the optimal location of a predefined implant can be planned preoperatively. Surgical results can be assessed intraoperatively or postoperatively. A novel method for quantifying orbital implant position is introduced. The method measures predictability of implant placement: transformation parameters between planned and resulting implant position are quantified.

Methods

The method was tested on 3 human specimen heads. Computed Tomography scans were acquired at baseline with intact orbits (t0), after creation of the defect (t1) and postoperatively after reconstruction of the defect using a preformed implant (t2). Prior to reconstruction, the optimal implant position was planned on the t0 and t1 scans. Postoperatively, the planned and realized implant position were compared. The t0 and t2 scans were fused using iPlan software and the resulting implant was segmented in the fused t2 scan. An implant reference frame was created (Orbital Implant Positioning Frame); the planned implant was transformed to the reference position using an Iterative Closest Point approach. The segmentation of the resulting implant was also registered on the reference position, yielding rotational (pitch, yaw, roll) as well as translational parameters of implant position.

Results

Measurement with the Orbital Implant Positioning Frame proved feasible on all three specimen. The positional outcome provided more thorough and accurate insight in resulting implant position than could be gathered from distance measurements alone. Observer-related errors were abolished from the process, since the method is largely automatic.

Conclusion

A novel method of quantifying surgical outcome in orbital reconstructive surgery was presented. The presented Orbital Implant Positioning Frame assessed all parameters involved in implant displacement. The method proved to be viable on three human specimen heads. Clinically, the method could provide direct feedback intraoperatively and could improve postoperative evaluation of orbital reconstructive surgery.

Bad splits in bilateral sagittal split osteotomy: systematic review of fracture patterns

An unfavourable and unanticipated pattern of the mandibular sagittal split osteotomy is generally referred to as a 'bad split'. Few restorative techniques to manage the situation have been described. In this article, a classification of reported bad split pattern types is proposed and appropriate salvage procedures to manage the different types of undesired fracture are presented. A systematic review was undertaken, yielding a total of 33 studies published between 1971 and 2015. These reported a total of 458 cases of bad splits among 19,527 sagittal ramus osteotomies in 10,271 patients. The total reported incidence of bad split was 2.3% of sagittal splits. The most frequently encountered were buccal plate fractures of the proximal segment (types 1A-F) and lingual fractures of the distal segment (types 2A and 2B). Coronoid fractures (type 3) and condylar neck fractures (type 4) have seldom been reported. The various types of bad split may require different salvage approaches.

Predictability in orbital reconstruction. A human cadaver study, part III: Implant-oriented navigation for optimized reconstruction

Navigation-assisted orbital reconstruction remains a challenge, because the surgeon focuses on a two-dimensional multiplanar view in relation to the preoperative planning. This study explored the addition of navigation markers in the implant design for three-dimensional (3D) orientation of the actual implant position relative to the preoperative planning for more fail-safe and consistent results. Pre-injury computed tomography (CT) was performed for 10 orbits in human cadavers, and complex orbital fractures (Class III/IV) were created. The orbits were reconstructed using preformed orbital mesh through a transconjunctival approach under image-guided navigation and navigation by referencing orientating markers in the implant design. Ideal implant positions were planned using preoperative CT scans. Implant placement accuracy was evaluated by comparing the planned and realized implant positions. Significantly better translation (3.53 mm vs. 1.44 mm, p = 0.001) and rotation (pitch: -1.7° vs. -2.2°, P = 0.52; yaw: 10.9° vs. 5.9°, P = 0.02; roll: -2.2° vs. -0.5°, P = 0.16) of the placed implant relative to the planned position were obtained by implant-oriented navigation. Navigation-assisted surgery can be improved by using navigational markers on the orbital implant for orientation, resulting in fail-safe reconstruction of complex orbital defects and consistent implant positioning.

Predictability in orbital reconstruction: A human cadaver study. Part I: Endoscopic-assisted orbital reconstruction

In the treatment of orbital defects, surgeon errors may lead to incorrect positioning of orbital implants and, consequently, poor clinical outcomes. Endoscopy can provide additional visualization of the orbit through the transantral approach. We aimed to evaluate whether endoscopic guidance during orbital reconstruction facilitates optimal implant placement and can serve as a convenient alternative for navigation and intra-operative imaging. Ten human cadaveric heads were subjected to thin-slice computed tomography (CT). Complex orbital fractures (Class III/IV) were created in all eligible orbits (n = 19), which were then reconstructed using the conventional transconjunctival approach with or without endoscopic guidance. The ideal implant location was digitally determined using pre-operative CT images, and the accuracy of implant placement was evaluated by comparing the planned implant location with the postoperative location. There were no statistically significant differences (p > 0.05) in the degree of implant dislocation (translation and rotation) between the transconjunctival orbital reconstruction and the endoscopic-assisted orbital reconstruction groups. Endoscopic-assisted orbital reconstruction may facilitate the visualization of orbital defects and is particularly useful for training purposes; however, it offers no additional benefits in terms of accurate implant positioning during the anatomical reconstruction of complex orbital defects.

Predictability in orbital reconstruction: A human cadaver study. Part II: Navigation-assisted orbital reconstruction

Preformed orbital reconstruction plates are useful for treating orbital defects. However, intraoperative errors can lead to misplaced implants and poor outcomes. Navigation-assisted surgery may help optimize orbital reconstruction. We aimed to explore whether navigation-assisted surgery is more predictable than traditional orbital reconstruction for optimal implant placement. Pre-injury computed tomography scans were obtained for 10 cadaver heads (20 orbits). Complex orbital fractures (Class III-IV) were created in all orbits, which were reconstructed using a transconjunctival approach with and without navigation. The best possible fit of the stereolithographic file of a preformed orbital mesh plate was used as the optimal position for reconstruction. The accuracy of the implant positions was evaluated using iPlan software. The consistency of orbital reconstruction was lower in the traditional reconstructions than in the navigation group in the parameters of translation and rotation. Implant position also differed significantly in the parameters of translation (p = 0.002) and rotation (pitch: p = 0.77; yaw: p < 0.001; roll: p = 0.001). Compared with traditional orbital reconstruction, navigation-assisted reconstruction provides more predictable anatomical reconstruction of complex orbital defects and significantly improves orbital implant position.

Controversies in orbital reconstruction--I. Defect-driven orbital reconstruction: a systematic review

In the 1980s, computed tomography was introduced as an imaging modality for diagnosing orbital fractures. Since then, new light has been shed on the field of orbital fracture management. Currently, most surgeons are likely to repair orbital fractures based on clinical findings and particularly on data obtained from computed tomography scans. However, an important but unresolved issue is the fracture size, which dictates the extent and type of reconstruction. In other fields of trauma surgery, an increasing body of evidence is stressing the importance of complexity-based treatment models. The aim of this study was to systematically review all articles on orbital reconstruction, with a focus on the indication for surgery and the defect size and location, in order to identify the reconstruction methods that show the best results for the different types of orbital fractures.

[Psychological aspects of orthognathic surgery]

Corrective jaw surgery, for patients with malocclusion and dysgnathia, is primarily performed to rehabilitate oral functions. However, the patients' motivation for orthognathic surgery often seems to be influenced as well by the desire for aesthetic correction of a facial anomaly. Preoperative screening for psychiatric problems such as body dysmorphic disorder is requisite. The majority of orthognathic patients experience a negative influence of their appearance on their psychosocial well-being. In addition, the hope for aesthetic improvement is not seldom an important incentive for visiting an oral and maxillofacial surgeon. In the literature, in addition to a positive effect of corrective jaw surgery on the patient's perceived appearance, an associated improvement in quality of life is described. Correction of a disharmonious face is at least as important to patients as oral function recovery.

Quantification of 18F-Fluoride Kinetics: Evaluation of Simplified Methods

(18)F-fluoride PET is a promising noninvasive method for measuring bone metabolism and bone blood flow. The purpose of this study was to assess the performance of various clinically useful simplified methods by comparing them with full kinetic analysis. In addition, the validity of deriving bone blood flow from K1 of (18)F-fluoride was investigated using (15)O-H2O as a reference.

METHODS

Twenty-two adults (mean age ± SD, 44.8 ± 25.2 y), including 16 patients scheduled for bone surgery and 6 healthy volunteers, were studied. All patients underwent dynamic (15)O-H2O and (18)F-fluoride scans before surgery. Ten of these patients had serial PET measurements before and at 2 time points after local bone surgery. During all PET scans, arterial blood was monitored continuously. (18)F-fluoride data were analyzed using nonlinear regression (NLR) and several simplified methods (Patlak and standardized uptake value [SUV]). SUV was evaluated for different time intervals after injection and after normalizing to body weight, lean body mass, and body surface area, and simplified measurements were compared with NLR results. In addition, changes in SUV and Patlak-derived fluoride influx rate (Ki) after surgery were compared with corresponding changes in NLR-derived Ki. Finally, (18)F-fluoride K1 was compared with bone blood flow derived from (15)O-H2O data, using the standard single-tissue-compartment model.

RESULTS

K1 of (18)F-fluoride correlated with measured blood flow, but the correlation coefficient was relatively low (r = 0.35, P < 0.001). NLR resulted in a mean Ki of 0.0160 ± 0.0122, whereas Patlak analysis, for the interval 10-60 min after injection, resulted in an almost-identical mean Ki of 0.0161 ± 0.0117. The Patlak-derived Ki, for 10-60 min after injection, showed a high correlation with the NLR-derived Ki (r = 0.976). The highest correlation between Ki and lean body mass-normalized SUV was found for the interval 50-60 min (r = 0.958). Finally, changes in SUV correlated significantly with those in Ki (r = 0.97).

CONCLUSION

The present data support the use of both Patlak and SUV for assessing fluoride kinetics in humans. However, (18)F-fluoride PET has only limited accuracy in monitoring bone blood flow.

[Interceptive treatment of maxillary hypoplasia with the use of bone anchors. A review of the literature]

A Class III malocclusion is mainly caused by a hypoplastic maxilla and therefore the treatment is principally aimed at stimulating the growth of the maxilla. Disadvantages of conventional treatment methods are that treatment effects are mainly dentoalveolar rather than skeletal and that there is often an increase in the height of the lowerface. Moreover, patients are not always cooperative about wearing extra-oral appliances. Because of these disadvantages, a new treatment approach has been developed which makes use of skeletal anchoring. In this new technique, called 'bone anchored maxillary protraction, bone anchors are placed on both sides of the maxilla and the mandibula, onto which Class III elastics are attached. The literature shows that good results have been achieved with this method. Disadvantages of this method are that the placement of the bone anchors requires a surgical procedure and that complications, like the loosening or breaking of the anchors, can occur.

Unilateral condylar hyperplasia: a 3-dimensional quantification of asymmetry

Purpose

Objective quantifications of facial asymmetry in patients with Unilateral Condylar Hyperplasia (UCH) have not yet been described in literature. The aim of this study was to objectively quantify soft-tissue asymmetry in patients with UCH and to compare the findings with a control group using a new method.

Material and Methods

Thirty 3D photographs of patients diagnosed with UCH were compared with 30 3D photographs of healthy controls. As UCH presents particularly in the mandible, a new method was used to isolate the lower part of the face to evaluate asymmetry of this part separately. The new method was validated by two observers using 3D photographs of five patients and five controls.

Results

A significant difference (0.79 mm) between patients and controls whole face asymmetry was found. Intra- and inter-observer differences of 0.011 mm (−0.034–0.011) and 0.017 mm (−0.007–0.042) respectively were found. These differences are irrelevant in clinical practice.

Conclusion

After objective quantification, a significant difference was identified in soft-tissue asymmetry between patients with UCH and controls. The method used to isolate mandibular asymmetry was found to be valid and a suitable tool to evaluate facial asymmetry.

[Unilateral condylar hyperactivity]

Unilateral condylar hyperactivity is a growth disorder which is characterised by a progressive asymmetry in the mandibula and in some cases also secondarily in the maxilla. Various forms are hemimandibular hyperplasia, hemimandibular elongation and a hybridform. In deciding on a plan of treatment, it is important to determine whether there is a question of continuous and/or excessive condylar activity, possibly with the help of a skeletal scintigraphy.