A systematic review of the biological mediators of fat taste and smell

Taste and smell play a key role in our ability to perceive foods. Overconsumption of highly palatable energy-dense foods can lead to increased caloric intake and obesity. Thus there is growing interest in the study of the biological mediators of fat taste and associated olfaction as potential targets for pharmacologic and nutritional interventions in the context of obesity and health. The number of studies examining mechanisms underlying fat taste and smell has grown rapidly in the last 5 years. Therefore, the purpose of this systematic review is to summarize emerging evidence examining the biological mechanisms of fat taste and smell. A literature search was conducted of studies published in English between 2014 and 2021 in adult humans and animal models. Database searches were conducted using PubMed, EMBASE, Scopus, and Web of Science for key terms including fat/lipid, taste, and olfaction. Initially, 4,062 articles were identified through database searches, and a total of 84 relevant articles met inclusion and exclusion criteria and are included in this review. Existing literature suggests that there are several proteins integral to fat chemosensation, including cluster of differentiation 36 (CD36) and G protein-coupled receptor 120 (GPR120). This systematic review will discuss these proteins and the signal transduction pathways involved in fat detection. We also review neural circuits, key brain regions, ingestive cues, postingestive signals, and genetic polymorphism that play a role in fat perception and consumption. Finally, we discuss the role of fat taste and smell in the context of eating behavior and obesity.

Vacuum insulation of the high energy negative ion source for fusion application

Vacuum insulation on a large size negative ion accelerator with multiple extraction apertures and acceleration grids for fusion application was experimentally examined and designed. In the experiment, vacuum insulation characteristics were investigated in the JT-60 negative ion source with >1000 apertures on the grid with the surface area of ∼2 m(2). The sustainable voltages varied with a square root of the gap lengths between the grids, and decreased with number of the apertures and with the surface area of the grids. Based on the obtained results, the JT-60SA (super advanced) negative ion source is designed to produce 22 A, 500 keV D(-) ion beams for 100 s.

Blood pressure control among diabetic hypertensives under cardiology follow-up at a regional hospital in rural Malaysia

Three hundred thirty-one consecutive patients presenting with hypertension to the outpatient medical clinic of Tengku Ampuan Afzan Hospital, Kuantan, Malaysia were screened and 150 patients with concurrent diabetes were enrolled into a cross-sectional study. The majority of patients were male (60.6%) with a mean age of 60.0 +/- 11.0 years. The mean systolic blood pressure (SBP) was 140.9 +/- 20.1 mmHg and the mean diastolic blood pressure (DBP) was 81.7 +/- 9.8 mmHg. Only 38.0% (57/150) of patients had blood pressures within recommended guidelines (130/80 mmHg). The mean blood pressure in this group was 123.7 +/- 8.5/76.4 +/- 5.6 mmHg. The majority of patients were on either 2 (41.3%) or 3 (31.3%) anti-hypertensives. Females had a significantly higher SBP 145.4 +/- 22.7 vs. 138.0 +/- 17.8 mmHg in males (p = 0.026). The level of blood pressure control in diabetics was unsatisfactory, especially in females and the elderly. A reassessment of priorities in the management of patients with concurrent hypertension and diabetes is therefore, urgently needed.

Development of rotating electrochemical detectors for capillary electrophoresis

A rotating disk electrode (RDE) has been evaluated and optimized for the detection of electroactive species separated by capillary electrophoresis (CE). With catechol as a working model, the limit of detection was estimated to be 0.3 microM, i.e., approximately 2.5-fold better than that of the stationary disk electrode (0.7 microM). Separation efficiency was significantly improved as exemplified by an increase of theoretical plates from 26,000 plates/m at 0 rpm to 67,000 plates/m at 500 rpm. Of particular importance was the capability of RDE to alleviate electrode passivation and electrical interference associated with high separation potential fields. Therefore, rotation amperometry was especially useful for analytes such as phenolic compounds that tended to rapidly foul the electrode surface. The RDE/ CE system was capable of separation and determination of pentachlorophenol in contaminated soils, and the result obtained agreed well with conventional liquid chromatography, an EPA recommended procedure.

[Analysis of urinary calculi in adults from the Moroccan Medium Atlas by Fourier transform infrared spectrophotometry]

OBJECTIVE

To determine the stone composition in adult patients from the medium Atlas of Morocco.

MATERIAL AND METHODS

A series of 183 calculi from adult patients (males: 123, females: 60) collected in medium Atlas of Morocco was analysed by Fourier Transform infrared spectroscopy. The stones were surgically removed (n = 168) or spontaneously passed (n = 15).

RESULTS

Kidney stones are encountered in 70.5% of calculi. The stones were twice frequent in males than in females (M/F = 2.10). Whewellite was the main component in 51.4% of the stones and 49.7% of the stone core, weddellite in only 7.1% of stones and 6.4% of the nuclei. Uric acid was predominant in 18% of stones and also 19.7% of nuclei, and carbapatite in 12.6% of stones and nuclei. All in all, whewellite was present in 77.6% of calculi and weddellite in 25.1%, carbapatite in 68.3% and PACC in 23.5%, struvite in 15.3%, uric acid in 20.8% and ammonium hydrogen urate in 14.2% of cases. Struvite stones were more frequent in females and uric acid calculi in males, in particular in patients aged more than 60 years old.

CONCLUSION

As observed in most countries, calcium oxalate was the most frequent major component of the stones (58.5%). Uric acid stones were more frequent (18%) than reported in Western countries, thus suggesting that particular dietary habits are involved in stone formation. The relatively high occurrence of struvite stones (8%) could be a marker of an insufficient early detection and treatment of chronic urinary tract infection.

In-line coupling capillary electrochromatography with amperometric detection for analysis of explosive compounds

Amperometric detection at a bare gold electrode has been in-line coupled with capillary electrochromatography (CEC) for analysis of nitroaromatic and nitroamine explosives in contaminated soils and ground water. The CEC column packed with 3 microm C18 particles performed best using a mobile phase containing 70-80% methanol, 30 or 20% water, 5 mM sodium dodecyl sulfate (SDS) and 10mM 2-(N-morpholino)ethanesulfonic acid (MES). In contrast, the separation column packed with 1.5 km C18 particles exhibited the best separation when only 30% methanol was added to a mobile phase containing 70% water, 7 mM SDS, and 10 mM MES. The detection, based on electrochemical reduction of the explosives (-0.7 or -1 V vs. Ag/AgCl, depending upon the level of methanol in the mobile phase), was compatible with such mobile phases. The detection limits for 13 explosives ranged from 100 to 200 ppb, i.e., about twofold better than those obtained with electrokinetic chromatography (EKC)/amperometric detection. From an operational viewpoint, exhaustive column conditioning was a prerequisite and care should be taken to prevent bubble formation and current breakdown during the course of separation. The CEC column equipped with amperometric detection successfully measured explosives in ground water and extracts prepared from contaminated soils and the results obtained agreed well with those of the U.S. Environmental protection Agency (EPA) method.

Nonaqueous capillary electrophoresis equipped with amperometric detection for analysis of chlorinated phenolic compounds

Nonaqueous capillary electrophoresis (NACE) equipped with amperometric detection has been developed for separation and detection of an 11-member model mixture of chlorinated phenolic compounds. With triacetyl-beta-cyclodextrin (TACD) as a novel selectivity selector, acetonitrile proved to be an excellent solvent for this water-insoluble cyclodextrin derivative. Resolution of the analytes was achieved by using an optimized acetonitrile medium consisting of 500 mM acetic acid, 10 mM sodium acetate, 12 mM TACD and 50 mM tetrabutylammonium perchlorate. Separation of analytes was attributed to differential electrostatic and/or inductive interactions of the analytes with the TACD/TBA+ complex and charged tetrabutylammonium phases. A simple end-column amperometric detector (Pt vs. Ag/AgCl, poised at +1.6 V) in conjunction with NACE was used to analyze chlorophenols. Amperometric detection of such target compounds in acetonitrile-based media offers high sensitivity and alleviates electrode fouling compared to aqueous buffers. The detection limits obtained, ranging from 30 nM to 500 nM, are 3-8-fold lower than those obtained with aqueous buffers.

Determination of explosives in soil and ground water by liquid chromatography-amperometric detection

Electrochemical reduction of trinitrotoluene (TNT) and several nitroaromatics has been exploited toward the development of an amperometric detector for liquid chromatography (LC). Up to a ten-fold increase in sensitivity was accomplished for the explosives using amperometric detection instead of conventional UV measurement. A working glassy carbon electrode (poised at -0.80 V vs. Ag/AgCl) offered a detection limit of 9, 44 and 550 nM for trinitrobenzene, TNT and 1,4-dinitrobenzene, respectively. Separation of eleven TNT-related compounds in a mixture was achieved within 15 min using a C18 column and a mobile phase consisting of acetonitrile-50 mM phosphate buffer pH 5 (1:2, v/v) and 18 mM sodium dodecylsulfate. The LC-amperometric detection system was applicable for analyzing soil extracts and ground water and the results obtained agreed well with that of the US Environmental Protection Agency recommended procedure. Extension to analysis of HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine) and RDX (hexahydro-1,3,5-trinitro-1,3,5-triazine) was accomplished with a silver working electrode instead of a glassy carbon electrode installed in a thin channel cell.

Utilization of TiO2 deposited on glass plates for removal of metals from aqueous wastes

Glass plates coated with TiO2 were used in a photocatalytic process to collect mercury, lead, copper and cadmium from aqueous solutions containing individual metals and mixtures. Stripping voltammetry, verified to achieve 1-10 ppb detection limits, was used to show that individual metals at concentrations of 1000 to 5200 ppb were reduced to undetectable levels in 3 to 55 min. Capillary electrophoresis (CE) with 8-hydroxyquinoline-5-sulfonic acid as complexing agent was used when appropriate, since it could quantitate all four metals under study in one run although it was less sensitive. It was demonstrated that 100 mL solutions containing 10 ppm of each of the four metals could be treated with a 10 cm2 TiO2-coated plate to leave undetectable metal concentrations in one hour. Stripping voltammetry using carbon electrodes coated with mercury films was estimated to generate daily about 1.1 L of aqueous waste containing 0.1 ppm of each metal. The results indicate the feasibility of assembling an apparatus capable of treating the waste generated by stripping voltammetry to render the latter suitable for routine on-site analyses without environmental concern. Data were also obtained to show the effectiveness in treating silver containing solutions, indicating suitability of the photocatalytic process in treating photographic processing wastes.