Size and orientation of the lipid II headgroup as revealed by AFM imaging

In this study, we investigated the size and orientation of the bacterial Lipid II (L II) headgroup when the L II molecule is present in liquid-crystalline domains of DOPC in a supported DPPC bilayer. Using atomic force microscopy, we detected that L II causes the appearance of a 1.9 nm thick layer, situated over the DOPC headgroup region. With an increased scanning force, this layer can be penetrated by the AFM tip down to the level of the DOPC bilayer. Using different L II precursor molecules, we demonstrated that the detected layer consists of the headgroups of L II and that the MurNAc-pentapeptide unit of the headgroup is responsible for the measured 1.9 nm height of that layer. Monolayer experiments provided information about the in-plane dimensions of the L II headgroup. On the basis of these results and considerations of the molecular dimensions of L II headgroup constituents, we propose a model for the orientation of the L II headgroup in the membrane. In this model, the pentapeptide of the L II headgroup is rather extended and points away from the bilayer surface, which could be important for biological processes, in which L II is involved.

Effect of phospholipids and a transmembrane peptide on the stability of the cubic phase of monoolein: implication for protein crystallization from a cubic phase

The cubic phase of monoolein has successfully been used for crystallization of a number of membrane proteins. However, the mechanism of protein crystallization in the cubic phase is still unknown. It was hypothesized, that crystallization occurs at locally formed patches of bilayers. To get insight into the stability of the cubic phase, we investigated the effect of different phospholipids and a model transmembrane peptide on the lipid organization in mixed monoolein systems. Deuterium-labeled 1-oleoyl-rac-[(2)H(5)]-glycerol was used as a selective probe for (2)H NMR. The phase behavior of the phospholipids was followed by (31)P NMR. Upon incorporation of phosphatidylcholine, phosphatidylethanolamine, phosphatidylglycerol, or phosphatidic acid, the cubic phase of monoolein transformed into the L(alpha) or H(II) phase depending on the phase preference of the phospholipid and its concentration. The ability of phospholipids to destabilize the cubic phase was found to be dependent on the phospholipid packing properties. Electrostatic repulsion facilitated the cubic-to-L(alpha) transition. Incorporation of the transmembrane peptide KALP31 induced formation of the L(alpha) phase with tightly packed lipid molecules. In all cases when phase separation occurs, monoolein and phospholipid participate in both phases. The implications of these findings for protein crystallization are discussed.

The effect of protein stability on protein-monoglyceride interactions

We have previously shown that proteins such as beta-lactoglobulin and lysozyme insert into monoglyceride monolayers and are able to induce an L(beta) to coagel phase transition in monoglyceride bilayers. These studies gave a first indication that protein stability could be an important factor for these interactions. This study therefore aims at further investigating the potential role of protein stability on protein-monoglyceride interactions. To this end we studied the interaction of stable and destabilized alpha-lactalbumin with monostearoylglycerol. Our results show that protein stability is important for the insertion of proteins into a monostearoylglycerol monolayer, such that the lower the stability of the protein the better the protein inserts. In marked contrast to beta-lactoglobulin and lysozyme we found that destabilized alpha-lactalbumin does not induce the L(beta) to coagel phase transition in monoglyceride bilayers. We propose that this is due to an increased surface coverage by the protein which could result from the unfolding of the protein upon binding to the interface.

Thermotropic phase behavior of monoglyceride-dicetylphosphate dispersions and interactions with proteins: a (2)H and (31)P NMR study

The phase behavior of a 1-[(2)H(35)]-stearoyl-rac-glycerol ([(2)H(35)]-MSG)/dicetylphosphate (DCP) mixture and its interaction with beta-lactoglobulin and lysozyme were studied by (2)H and (31)P nuclear magnetic resonance (NMR). The behavior of the lipids was monitored by using deuterium-labeled [(2)H(35)]-MSG as a selective probe for (2)H NMR and DCP for (31)P NMR. Both (2)H and (31)P NMR spectra exhibit characteristic features representative of different phases. In the lamellar phases, (31)P NMR spectra of DCP are different from the spectra of natural phospholipids, which is attributable to differences in the intramolecular motions and the orientation of the shielding tensor of DCP compared with phospholipids. The presence of the negatively charged amphiphile DCP has a large effect on the phase behavior of [(2)H(35)]-MSG. At low temperature, the presence of DCP inhibits crystallization of the gel phase into the coagel. Upon increasing the temperature, the gel phase of [(2)H(35)]-MSG transforms in the liquid-crystalline lamellar phase. In the presence of DCP, the gel phase directly transforms into an isotropic phase. The negatively charged beta-lactoglobulin and the positively charged lysozyme completely neutralize the destabilizing effect of DCP on the monoglyceride liquid-crystalline phase and they even stabilize this phase. Without DCP the proteins do not seem to interact with the monoglyceride. These results suggest that interaction is facilitated by electrostatic interactions between the negatively charged DCP and positively charged residues in the proteins. In addition, the nonbilayer-forming DCP creates insertion sites for proteins in the bilayer.

Anionic lipids stimulate Sec-independent insertion of a membrane protein lacking charged amino acid side chains

We have investigated the influence of the different lipid classes of Escherichia coli on Sec-independent membrane protein insertion, using an assay in which a mutant of the single-spanning Pf3 coat protein is biosynthetically inserted into liposomes. It was found that phosphatidylethanolamine and other non-bilayer lipids do not have a significant effect on insertion. Surprisingly, the anionic lipids phosphatidylglycerol and cardiolipin stimulate N-terminal translocation of the protein, even though it has no charged amino acid side chains. This novel effect is general for anionic lipids and depends on the amount of charge on the lipid headgroup. Since the N-terminus of the protein is at least partially positively charged due to a helix dipole moment, apparently negatively charged lipids can stimulate translocation of slightly positively charged protein segments in a direction opposite to the positive-inside rule. A mechanism is proposed to explain these results.

Membrane-spanning peptides induce phospholipid flop: a model for phospholipid translocation across the inner membrane of E. coli

The mechanism by which phospholipids translocate (flop) across the E. coli inner membrane remains to be elucidated. We tested the hypothesis that the membrane-spanning domains of proteins catalyze phospholipid flop by their mere presence in the membrane. As a model, peptides mimicking the transmembrane stretches of proteins, with the amino acid sequence GXXL(AL)(n)XXA (with X = K, H, or W and n = 8 or 12), were incorporated in large unilamellar vesicles composed of E. coli phospholipids. Phospholipid flop was measured by assaying the increase in accessibility to dithionite of a 2,6-(7-nitro-2,1,3-benzoxadiazol-4-yl)aminocaproyl (C(6)NBD)-labeled phospholipid analogue, initially exclusively present in the inner leaflet of the vesicle membrane. Fast flop of C(6)NBD-phosphatidylglycerol (C(6)NBD-PG) was observed in vesicles in which GKKL(AL)(12)KKA was incorporated, with the apparent first-order flop rate constant (K(flop)) linearly increasing with peptide:phospholipid molar ratios, reaching a translocation half-time of approximately 10 min at a 1:250 peptide:phospholipid molar ratio at 25 degrees C. The peptides of the series GXXL(AL)(8)XXA also induced flop of C(6)NBD-PG, supporting the hypothesis that transmembrane parts of proteins mediate phospholipid translocation. In this series, K(flop) decreased in the order X = K > H > W, indicating that peptide-lipid interactions in the interfacial region of the membrane modulate the efficiency of a peptide to cause flop. For the peptides tested, flop of C(6)NBD-phosphatidylethanolamine (C(6)NBD-PE) was substantially slower than that of C(6)NBD-PG. In vesicles without peptide, flop was negligible both for C(6)NBD-PG and for C(6)NBD-PE. A model for peptide-induced flop is proposed, which takes into account the observed peptide and lipid specificity.

Imaging domains in model membranes with atomic force microscopy

Lateral segregation in biomembranes can lead to the formation of biologically functional domains. This paper reviews atomic force microscopy studies on domain formation in model membranes, with special emphasis on transbilayer asymmetry, and on lateral domains induced by lipid-lipid interactions or by peptide-lipid interactions.

Membrane activity of the peptide antibiotic clavanin and the importance of its glycine residues

The peptide antibiotic clavanin A (VFQFLGKIIHHVGNFVHGFSHVF-NH(2)) is rich in histidine and glycine residues. In this study the antimicrobial activity and membrane activity of wild-type clavanin A and seven Gly --> Ala mutants thereof were investigated. Clavanin A effectively killed the test microorganism Micrococcus flavus and permeabilized its cytoplasmic membrane in the micromolar concentration range, suggesting that the membrane is the target for this molecule. Consistent with this suggestion, it was observed that clavanin A efficiently inserted into different phospholipid monolayers mainly via hydrophobic interactions. Bilayer permeabilization was observed for both low and high molecular mass fluorophores enclosed in unilamellar vesicles and occurred at the same concentration as the antimicrobial activity. It is therefore suggested that the loss of barrier function does not involve specific receptors in the target membrane. Circular dichroism spectroscopy indicated that under membrane mimicking conditions a random coil --> helical transition was induced for all clavanin derivatives tested. Observed differences in peptide-membrane interaction and biological activity between the various clavanin derivatives demonstrated the functional importance of Gly at the positions 6 and 13. These two glycines may act as flexible hinges that facilitate the hydrophobic N-terminal end of clavanin to deeply insert into the bilayer. On the contrary, no such role is evident for Gly 18, as its substitution by Ala actually stimulated membrane interaction and biological activity. This study suggests that the combined hydrophobicity, overall state of charge, and conformational flexibility of the peptide determine the (membrane) activity of clavanin A and its Gly --> Ala mutants.

Effect of nonbilayer lipids on membrane binding and insertion of the catalytic domain of leader peptidase

Biological membranes contain a substantial amount of "nonbilayer lipids", which have a tendency to form nonlamellar phases. In this study the hypothesis was tested that the presence of nonbilayer lipids in a membrane, due to their overall small headgroup, results in a lower packing density in the headgroup region, which might facilitate the interfacial insertion of proteins. Using the catalytic domain of leader peptidase (delta2-75) from Escherichia coli as a model protein, we studied the lipid class dependence of its insertion and binding. In both lipid monolayers and vesicles, the membrane binding of (catalytically active) delta2-75 was much higher for the nonbilayer lipid DOPE compared to the bilayer lipid DOPC. For the nonbilayer lipids DOG and MGDG a similar effect was observed as for DOPE, strongly suggesting that no specific interactions are involved but that the small headgroups create hydrophobic interfacial insertion sites. On the basis of the results of the monolayer experiments, calculations were performed to estimate the space between the lipid headgroups accessible to the protein. We estimate a maximal size of the insertion sites of 15 +/- 7 A2/lipid molecule for DOPE, relative to DOPC. The size of the insertion sites decreases with an increase in headgroup size. These results show that nonbilayer lipids stimulate the membrane insertion of delta2-75 and support the idea that such lipids create insertion sites by reducing the packing density at the membrane-water interface. It is suggested that PE in the bacterial membrane facilitates membrane insertion of the catalytic domain of leader peptidase, allowing the protein to reach the cleavage site in preproteins.

Visualizing detergent resistant domains in model membranes with atomic force microscopy

Evidence is accumulating that in cell membranes microdomains exist, also referred to as rafts or detergent resistant membranes. In this study, atomic force microscopy is used to study supported lipid bilayers, consisting of a fluid phosphatidylcholine, sphingomyelin and cholesterol. Domains were visualized of which the morphology and size depended on the cholesterol concentration. The presence of cholesterol was found to induce bilayer coupling. At 30 mol% cholesterol, a change in percolation phase was observed, and at 50 mol%, when both fluid lipids and solid lipids are saturated with cholesterol, phase separation was still observed. In addition, we were able to directly visualize the resistance of domains against non-ionic detergent.

The N-terminal portion of the preToc75 transit peptide interacts with membrane lipids and inhibits binding and import of precursor proteins into isolated chloroplasts

Toc75 is an outer envelope membrane protein of chloroplasts. It is unusual among the outer membrane proteins in that its precursor form has a bipartite transit peptide. The N-terminal portion of the Toc75 transit peptide is sufficient to target the protein to the stromal space of chloroplasts. We prepared a 45 amino-acid peptide containing the stromal targeting domain of the Toc75 transit peptide in Escherichia coli, using the intein-mediated system, and purified it by reverse-phase HPLC. Its identity was confirmed by N-terminal amino-acid sequencing and matrix assisted laser desorption ionization mass spectrometry. In monolayer experiments, the peptide inserted into the chloroplastic membrane lipids sulfoquinovosyl diacylglycerol and phosphatidylglycerol and into a nonchloroplastic lipid phosphatidylethanolamine. However, it did not insert into other chloroplastic lipids, such as mono- and digalactosyl diacylglycerol, and phosphatidylcholine. Furthermore, the peptide significantly inhibited binding of radiolabeled precursors of Toc75 and the small subunit of ribulose-1,5-bisphosphate carboxylase/oxygenase to intact chloroplasts as effectively as did a bacterially produced precursor of the small subunit of 1,5-bisphosphate carboxylase/oxygenase. The peptide also inhibited import of radiolabeled precursors into isolated chloroplasts, however, to a lesser extent than did nonlabeled precursor of the small subunit of 1,5-bisphosphate carboxylase/oxygenase.

Biophysical characterization of the influence of salt on tetrameric SecB

SecB is a tetrameric chaperone, with a monomeric molecular mass of 17 kDa, that is involved in protein translocation in Escherichia coli. It has been hypothesized that SecB undergoes a conformational change as a function of the salt concentration. To gain more insight into the salt-dependent behavior of SecB, we studied the protein in solution by dynamic light scattering, size exclusion chromatography, analytical ultracentrifugation, and small angle neutron scattering. The results clearly demonstrate the large influence of the salt concentration on the behavior of SecB. At high salt concentration, SecB is a non-spherical protein with a radius of gyration of 3.4 nm. At low salt concentration the hydrodynamic radius of the protein is apparently decreased, whereas the ratio of the frictional coefficients is increased. The protein solution behaves in a non-ideal way at low salt concentrations, as was shown by the analytical ultracentrifugation data and a pronounced interparticle effect observed by small angle neutron scattering. A possible explanation is a change in surface charge distribution dependent on the salt concentration in the solvent. We summarize our data in a model for the salt-dependent conformation of tetrameric SecB.

Sensitivity of single membrane-spanning alpha-helical peptides to hydrophobic mismatch with a lipid bilayer: effects on backbone structure, orientation, and extent of membrane incorporation

The extent of matching of membrane hydrophobic thickness with the hydrophobic length of transmembrane protein segments potentially constitutes a major director of membrane organization. Therefore, the extent of mismatch that can be compensated, and the types of membrane rearrangements that result, can provide valuable insight into membrane functionality. In the present study, a large family of synthetic peptides and lipids is used to investigate a range of mismatch situations. Peptide conformation, orientation, and extent of incorporation are assessed by infrared spectroscopy, tryptophan fluorescence, circular dichroism, and sucrose gradient centrifugation. It is shown that peptide backbone structure is not significantly affected by mismatch, even when the extent of mismatch is large. Instead, this study demonstrates that for tryptophan-flanked peptides the dominant response of a membrane to large mismatch is that the extent of incorporation is reduced, when the peptide is both too short and too long. With increasing mismatch, a smaller fraction of peptide is incorporated into the lipid bilayer, and a larger fraction is present in extramembranous aggregates. Relatively long peptides that remain incorporated in the bilayer have a small tilt angle with respect to the membrane normal. The observed effects depend on the nature of the flanking residues: long tryptophan-flanked peptides do not associate well with thin bilayers, while equisized lysine-flanked peptides associate completely, thus supporting the notion that tryptophan and lysine interact differently with membrane-water interfaces. The different properties that aromatic and charged flanking residues impart on transmembrane protein segments are discussed in relation to protein incorporation in biological systems.

The specificity of monoglyceride-protein interactions and mechanism of the protein induced L(beta) to coagel phase transition

This study aims at gaining insight into the specificity and molecular mechanism of monoglyceride-protein interactions. We used beta-lactoglobulin (beta-LG) and lysozyme as model proteins and both monostearoylglycerol and monopalmitoylglycerol as defined gel phase monoglycerides. The monoglycerides were used in different combinations with the two negatively charged amphiphiles dicetylphosphate and distearylphosphate. The interactions were characterized using the monolayer technique, isothermal titration calorimetry, (2)H-nuclear magnetic resonance (NMR) using deuterium labelled monoglycerides and freeze fracture electron microscopy (EM). Our results show that lysozyme inserts efficiently into all monolayers tested, including pure monoglyceride layers. The insertion of beta-LG depends on the lipid composition of the monolayer and is promoted when the acylchains of the negatively charged amphiphile are shorter than that of the monoglyceride. The binding parameters found for the interaction of beta-LG and lysozyme with monoglyceride bilayers were generally similar. Moreover, in all cases a large exothermic binding enthalpy was observed which was found to depend on the nature of the monoglycerides but not of the proteins. (2)H-NMR and freeze fracture EM showed that this large enthalpy results from a protein mediated catalysis of the monoglyceride L(beta) to coagel phase transition. The mechanism of this phase transition consists of two steps, an initial protein mediated vesicle aggregation step which is followed by stacking and probably fusion of the bilayers.

Specific binding of nisin to the peptidoglycan precursor lipid II combines pore formation and inhibition of cell wall biosynthesis for potent antibiotic activity

Unlike numerous pore-forming amphiphilic peptide antibiotics, the lantibiotic nisin is active in nanomolar concentrations, which results from its ability to use the lipid-bound cell wall precursor lipid II as a docking molecule for subsequent pore formation. Here we use genetically engineered nisin variants to identify the structural requirements for the interaction of the peptide with lipid II. Mutations affecting the conformation of the N-terminal part of nisin comprising rings A through C, e.g. [S3T]nisin, led to reduced binding and increased the peptide concentration necessary for pore formation. The binding constant for the S3T mutant was 0.043 x 10(7) m(-1) compared with 2 x 10(7) m(-1) for the wild-type peptide, and the minimum concentration for pore formation increased from the 1 nm to the 50 nm range. In contrast, peptides mutated in the flexible hinge region, e.g. [DeltaN20/DeltaM21]nisin, were completely inactive in the pore formation assay, but were reduced to some extent in their in vivo activity. We found the remaining in vivo activity to result from the unaltered capacity of the mutated peptide to bind to lipid II and thus to inhibit its incorporation into the peptidoglycan network. Therefore, through interaction with the membrane-bound cell wall precursor lipid II, nisin inhibits peptidoglycan synthesis and forms highly specific pores. The combination of two killing mechanisms in one molecule potentiates antibiotic activity and results in nanomolar MIC values, a strategy that may well be worth considering for the construction of novel antibiotics.

Lipid organization and dynamics of the monostearoylglycerol-water system. A 2H NMR study

Deuterium labeled monostearoylglycerols with fully ([2H(35)]-MSG) and selectively ([11-(2)H(2)]-MSG) deuterated chains have been synthesized and used as a probe for 2H NMR. At low temperature monoglyceride-water systems form the coagel or crystalline phase, which transforms with increasing temperature subsequently into the gel, liquid crystalline and cubic phase. The 2H NMR spectra exhibit characteristic features representative of these phases. The gel phase is metastable and gradually transforms into the coagel at temperatures below 40 degrees C. The undercooled cubic phase transforms into the liquid crystalline phase during days. In the liquid crystalline phase, the chain order profile indicates an increase of the chain flexibility towards the methyl group. In the liquid crystalline phase, bilayers spontaneously align in a magnetic field with their normal perpendicular to the field. The results demonstrate that 2H NMR can serve as a convenient tool to study both structure and dynamics of different monoglyceride-water phases.

The high affinity ATP binding site modulates the SecA-precursor interaction

SecA is the central component of the protein-translocation machinery of Escherichia coli. It is able to interact with the precursor protein, the chaperone SecB, the integral membrane protein complex SecYEG, acidic phospholipids and its own mRNA. We studied the interaction between prePhoE and SecA by using a site-specific photocrosslinking strategy. We found that SecA is able to interact with both the signal sequence and the mature domain of prePhoE. Furthermore, this interaction was dependent on the type of nucleotide bound. SecA in the ADP-bound conformation was unable to crosslink with the precursor, whereas the ATP-bound conformation was active in precursor crosslinking. The SecA-precursor interaction was maintained in the presence of E. coli phospholipids but was loosened by the presence of phosphatidylglycerol bilayers. Examining SecA ATP binding site mutants demonstrated that ATP hydrolysis at the N-terminal high affinity binding site is responsible for the changed interaction with the preprotein.

Dynamin is membrane-active: lipid insertion is induced by phosphoinositides and phosphatidic acid

Dynamin is a large GTPase involved in the regulation of membrane constriction and fission during receptor-mediated endocytosis. Dynamin contains a pleckstrin-homology domain which is essential for endocytosis and which binds to anionic phospholipids. Here, we show for the first time that dynamin is a membrane-active molecule capable of penetrating into the acyl chain region of membrane lipids. Lipid penetration is strongly stimulated by phosphatidic acid (PA), phosphatidylinositol 4-phosphate, and phosphatidylinositol 4, 5-bisphosphate. Though binding is more efficient in the presence of the phosphoinositides, a much larger part of the dynamin molecule penetrates into PA-containing mixed-lipid systems. Thus, local lipid metabolism will dramatically influence dynamin-lipid interactions, and dynamin-lipid interactions are likely to play an important role in dynamin-dependent endocytosis. Our data suggest that dynamin is directly involved in membrane destabilization, a prerequisite to membrane fission.

Characterisation of new intracellular membranes in Escherichia coli accompanying large scale over-production of the b subunit of F(1)F(o) ATP synthase

Recombinant membrane proteins in Escherichia coli are either expressed at relatively low level in the cytoplasmic membrane or they accumulate as inclusion bodies. Here, we report that the abundant over-production of subunit b of E. coli F(1)F(o) ATP synthase in the mutant host strains E. coli C41(DE3) and C43(DE3) is accompanied by the proliferation of intracellular membranes without formation of inclusion bodies. Maximal levels of proliferation of intracellular membranes were observed in C43(DE3) cells over-producing subunit b. The new proliferated membranes contained all the over-expressed protein and could be recovered by a single centrifugation step. Recombinant subunit b represented up to 80% of the protein content of the membranes. The lipid:protein ratios and phospholipid compositions of the intracellular membranes differ from those of bacterial cytoplasmic membranes, and they are particularly rich in cardiolipin.

Efficient membrane assembly of the KcsA potassium channel in Escherichia coli requires the protonmotive force

Very little is known about the biogenesis and assembly of oligomeric membrane proteins. In this study, the biogenesis of KcsA, a prokaryotic homotetrameric potassium channel, is investigated. Using in vivo pulse-chase experiments, both the monomeric and tetrameric form could be identified. The conversion of monomers into a tetramer is found to be a highly efficient process that occurs in the Escherichia coli inner membrane. KcsA does not require ATP hydrolysis by SecA for insertion or tetramerization. The presence of the proton-motive force (pmf) is not necessary for transmembrane insertion of KcsA; however, the pmf proved to be essential for the efficiency of oligomerization. From in vivo and in vitro experiments it is concluded that the electrical component, deltapsi, is the main determinant for this effect. These results demonstrate a new role of the pmf in membrane protein biogenesis.

Binding of Nisin Z to bilayer vesicles as determined with isothermal titration calorimetry

Nisin Z, a 34-residue lantibiotic, is secreted by some lactic acid bacteria and exerts its antibacterial activity against various Gram-positive bacteria by permeabilizing the cell membrane. It is a cationic amphiphilic peptide with several unusual dehydro residues and thioether-bridged lanthionines. Isothermal titration calorimetry was used to provide a quantitative thermodynamic description for nisin Z adsorption to and penetration into negatively charged and neutral lipid bilayers. The binding of the cationic peptide (electric charge z approximately 3.8) to anionic membranes was found to be dominated by electrostatic forces which could be described with the Gouy-Chapman theory. For biologically relevant conditions with a membrane surface potential of -40 mV, the peptide concentration near the membrane surface increases by about 2-3 orders of magnitude compared to the bulk concentration. The binding step proper, i.e., the transition from the lipid-water interface into the membrane, is almost exclusively driven by the high surface concentration. Binding can be described by a partition equilibrium of the form X(b) = KC(M) = KC(p,f) exp(-z(p)psi(0)F(0)/RT), where C(M) is the peptide surface concentration, C(p,f) the bulk concentration, and psi(0) the membrane surface potential. The intrinsic partition coefficient (K = 1.8 M(-)(1)) is remarkably small, indicating a correspondingly small hydrophobic energy contribution to the binding process. The electrostatic model was confirmed with nisin Z mutants in which valine-32 was replaced with either lysine (V32K) or glutamate (V32E), increasing or decreasing the electric charge by 1 unit. The extent of peptide binding increased for V32K and decreased for V32E as predicted by the electrostatic theory. In contrast, electrostatic effects were almost negligible for the binding of nisin Z to neutral membranes. However, the binding isotherms were characterized by a distinctly larger intrinsic binding constant K(0) of approximately 540 M(-)(1) and an enhanced hydrophobic free energy of binding. The binding of nisin Z to sonicated lipid vesicles is exothermic with a DeltaH degrees of ca. -9 and -3.4 kcal/mol for charged and neutral membranes, respectively.

Structure, dynamics, and insertion of a chloroplast targeting peptide in mixed micelles

Nuclear-encoded, chloroplast-destined proteins are synthesized with transit sequences that contain all information to get them inside the organelle. Different proteins are imported via a general protein import machinery, but their transit sequences do not share amino acid homology. It has been suggested that interactions between transit sequence and chloroplast envelope membrane lipids give rise to recognizable, structural motifs. In this study a detailed investigation of the structural, dynamical, and topological features of an isolated transit peptide associated with mixed micelles is described. The structure of the preferredoxin transit peptide in these micelles was studied by circular dichroism (CD) and multidimensional NMR techniques. CD experiments indicated that the peptide, which is unstructured in aqueous solution, obtained helical structure in the presence of the micelles. By NMR it is shown that the micelles introduced ill-defined helical structures in the transit peptide. Heteronuclear relaxation experiments showed that the whole peptide backbone is very flexible. The least dynamic segments are two N- and C-terminal helical regions flanking an unstructured proline-rich amino acid stretch. Finally, the insertion of the peptide backbone in the hydrophobic interior of the micelle was investigated by use of hydrophobic spin-labels. The combined data result in a model of the transit peptide structure, backbone dynamics, and insertion upon its interaction with mixed micelles.

Further analysis of the involvement of the envelope anion channel PIRAC in chloroplast protein import

The ability of preferredoxin to inactivate a 50-pS anion channel of the chloroplast inner membrane in the presence of an energy source was investigated using single-channel recordings. It was found that preferredoxin cannot inactivate the channel when GTP is the only energy source present. From this it is concluded that the precursor has to interact with the, translocon of the inner membrane of chloroplasts (Tic) complex to be able to inactivate the 50-pS anion channel. The ability of two mutants of preferredoxin with deletions in their transit sequence to inactivate the channel was also tested. Both mutants have been shown to have a similar binding affinity for the chloroplast envelope, but only one is able to fully translocate. The mutants were both able to inactivate the channel in a similar manner. From this it is concluded that full translocation is not necessary for the inactivation of the channel. It is also shown that preferredoxin is capable of inactivating the 50-pS anion channel in the chloroplast-attached configuration as was previously found in the inside-out configuration. From this it is concluded that stromal factors do not influence the protein-import-induced inactivation of the 50-pS anion channel of the chloroplast inner membrane. Finally the effect of the anion channel blocker 4, 4'-diisothiocyanostilbene-2,2'-disulfonate (DIDS) on the channel activity and on protein import was investigated. It was found that DIDS blocked the channel. Furthermore the addition of the channel blocker reduces the efficiency of import to 52%. This leads to the conclusion that correct functioning of the channel is important for protein import.

Analysis of the role of interfacial tryptophan residues in controlling the topology of membrane proteins

Tryptophans have a high affinity for the membrane-water interface and have been suggested to play a role in determining the topology of membrane proteins. We investigated this potential role experimentally, using mutants of the single-spanning Pf3 coat protein, whose transmembrane topologies are sensitive to small changes in amino acid sequence. Mutants were constructed with varying numbers of tryptophans flanking the transmembrane region and translocation was assessed by an in vitro translation/translocation system. Translocation into Escherichia coli inner membrane vesicles could take place under a variety of experimental conditions, with co- or posttranslational assays and proton motive force-dependent or -independent mutants. It was found that translocation can even occur in pure lipid vesicles, under which conditions the tryptophans must directly interact with the lipids. However, under all these conditions tryptophans neither inhibited nor stimulated translocation, demonstrating that they do not affect topology and suggesting that this may be universal for tryptophans in membrane proteins. In contrast, we could demonstrate that lysines clearly prefer to stay on the cis-side of the membrane, in agreement with the positive-inside rule. A statistical analysis focusing on interfacially localized residues showed that in single-spanning membrane proteins lysines are indeed located on the inside, while tryptophans are preferentially localized at the outer interface. Since our experimental results show that the latter is not due to a topology-determining role, we propose instead that tryptophans fulfill a functional role as interfacially anchoring residues on the trans-side of the membrane.

Visualization of highly ordered striated domains induced by transmembrane peptides in supported phosphatidylcholine bilayers

We used atomic force microscopy (AFM) to study the lateral organization of transmembrane TmAW(2)(LA)(n)W(2)Etn peptides (WALP peptides) incorporated in phospholipid bilayers. These well-studied model peptides consist of a hydrophobic alanine-leucine stretch of variable length, flanked on each side by two tryptophans. They were incorporated in saturated phosphatidylcholine (PC) vesicles, which were deposited on a solid substrate via the vesicle fusion method, yielding hydrated gel-state supported bilayers. At low concentrations (1 mol %) WALP peptides induced primarily line-type depressions in the bilayer. In addition, striated lateral domains were observed, which increased in amount and size (from 25 nm up to 10 microm) upon increasing peptide concentration. At high peptide concentration (10 mol %), the bilayer consisted mainly of striated domains. The striated domains consist of line-type depressions and elevations with a repeat distance of 8 nm, which form an extremely ordered, predominantly hexagonal pattern. Overall, this pattern was independent of the length of the peptides (19-27 amino acids) and the length of the lipid acyl chains (16-18 carbon atoms). The striated domains could be pushed down reversibly by the AFM tip and are thermodynamically stable. This is the first direct visualization of alpha-helical transmembrane peptide-lipid domains in a bilayer. We propose that these striated domains consist of arrays of WALP peptides and fluidlike PC molecules, which appear as low lines. The presence of the peptides perturbs the bilayer organization, resulting in a decrease in the tilt of the lipids between the peptide arrays. These lipids therefore appear as high lines.

The effect of peptide/lipid hydrophobic mismatch on the phase behavior of model membranes mimicking the lipid composition in Escherichia coli membranes

The effect of hydrophobic peptides on the lipid phase behavior of an aqueous dispersion of dioleoylphosphatidylethanolamine and dioleoylphosphatidylglycerol (7:3 molar ratio) was studied by (31)P NMR spectroscopy. The peptides (WALPn peptides, where n is the total number of amino acid residues) are designed as models for transmembrane parts of integral membrane proteins and consist of a hydrophobic sequence of alternating leucines and alanines, of variable length, that is flanked on both ends by tryptophans. The pure lipid dispersion was shown to undergo a lamellar-to-isotropic phase transition at approximately 60 degrees C. Small-angle x-ray scattering showed that at a lower water content a cubic phase belonging to the space group Pn3m is formed, suggesting also that the isotropic phase in the lipid dispersion represents a cubic liquid crystalline phase. It was found that the WALP peptides very efficiently promote formation of nonlamellar phases in this lipid system. At a peptide-to-lipid (P/L) molar ratio of 1:1000, the shortest peptide used, WALP16, lowered the lamellar-to-isotropic phase transition by approximately 15 degrees C. This effect was less for longer peptides. For all of the WALP peptides used, an increase in peptide concentration led to a further lowering of the phase transition temperature. At the highest P/L ratio (1:25) studied, WALP16 induced a reversed hexagonal liquid crystalline (H(II)) phase, while the longer peptides still promoted the formation of an isotropic phase. Peptides with a hydrophobic length larger than the bilayer thickness were found to be unable to inhibit formation of the isotropic phase. The results are discussed in terms of mismatch between the hydrophobic length of the peptide and the hydrophobic thickness of the lipid bilayer and its consequences for lipid-protein interactions in membranes.

The phosphatidylcholine to phosphatidylethanolamine ratio of Saccharomyces cerevisiae varies with the growth phase

This study compares the effect of the growth phase on the phospholipid composition and the activity of several phospholipid biosynthetic enzymes in a wild-type yeast grown in fermentable (glucose) and non-fermentable (lactate) semi-synthetic and complete synthetic media. Several distinct differences as well as similarities were found. The cellular phosphatidylcholine: phosphatidylethanolamine (PC:PE) ratio was found to vary with the growth phase, with increases in PC levels at the expense of PE during the transition to stationary phase. The variation was most pronounced in semi-synthetic lactate medium, which is routinely used for the isolation of mitochondria, where the PC:PE ratio changed from 0.9 to 2.2 during this transition. Similar growth phase-dependent changes in PC and PE content were observed in isolated organelles such as mitochondria, mitochondria-associated membranes and microsomes. Phosphatidylinositol (PI) levels were much higher in cells grown on lactate compared to cells grown on glucose (20% vs. 5-10%). Irrespective of the medium, PI levels increased upon entering stationary phase. The activities of the phospholipid biosynthetic enzymes phosphatidylserine synthase and the phospholipid-N-methyltransferases were found to be maximal at the end of logarithmic growth and to decrease upon entering stationary phase in all media. Cells grown on lactate displayed a significantly higher phospholipid:protein ratio than cells grown on glucose. The results are discussed in terms of regulation of phospholipid biosynthesis and membrane biogenesis in response to growth phase and carbon source.

Anionic phospholipids are involved in membrane association of FtsY and stimulate its GTPase activity

FtsY, the Escherichia coli homologue of the eukaryotic signal recognition particle (SRP) receptor alpha-subunit, is located in both the cytoplasm and inner membrane. It has been proposed that FtsY has a direct targeting function, but the mechanism of its association with the membrane is unclear. FtsY is composed of two hydrophilic domains: a highly charged N-terminal domain (the A-domain) and a C-terminal GTP-binding domain (the NG-domain). FtsY does not contain any hydrophobic sequence that might explain its affinity for the inner membrane, and a membrane-anchoring protein has not been detected. In this study, we provide evidence that FtsY interacts directly with E.coli phospholipids, with a preference for anionic phospholipids. The interaction involves at least two lipid-binding sites, one of which is present in the NG-domain. Lipid association induced a conformational change in FtsY and greatly enhanced its GTPase activity. We propose that lipid binding of FtsY is important for the regulation of SRP-mediated protein targeting.

Engineering a disulfide bond and free thiols in the lantibiotic nisin Z

The antimicrobial peptide nisin contains the uncommon amino acid residues lanthionine and methyl-lanthionine, which are post-translationally formed from Ser, Thr and Cys residues. To investigate the importance of these uncommon residues for nisin activity, a mutant was designed in which Thr13 was replaced by a Cys residue, which prevents the formation of the thioether bond of ring C. Instead, Cys13 couples with Cys19 via an intramolecular disulfide bridge, a bond that is very unusual in lantibiotics. NMR analysis of this mutant showed a structure very similar to that of wild-type nisin, except for the configuration of ring C. The modification was accompanied by a dramatic reduction in antimicrobial activity to less than 1% of wild-type activity, indicating that the lanthionine of ring C is very important for this activity. The nisin Z mutants S5C and M17C were also isolated and characterized; they are the first lantibiotics known that contain an additional Cys residue that is not involved in bridge formation but is present as a free thiol. Secretion of these peptides by the lactococcal producer cells, as well as their antimicrobial activity, was found to be strongly dependent on a reducing environment. Their ability to permeabilize lipid vesicles was not thiol-dependent. Labeling of M17C nisin Z with iodoacetamide abolished the thiol-dependence of the peptide. These results show that the presence of a reactive Cys residue in nisin has a strong effect on the antimicrobial properties of the peptide, which is probably the result of interaction of these residues with thiol groups on the outside of bacterial cells.

Crystals of acetylated SecB diffract to 2.3-A resolution

The molecular chaperone SecB is part of the protein translocation pathway in Escherichia coli. SecB was purified from an overproducing strain and crystallized, resulting in crystals diffracting to 2.3-A resolution. The analysis of electrospray ionization mass spectra of dissolved crystals of SecB indicated that we have crystallized an acetylated form of SecB. Sequence analysis suggests that the protein is fully acetylated at its N-terminus in vivo, indicating that potential deacetylation is artificially introduced by purification methods. The high degree of acetylation that we observed might account for the fact that the crystals obtained as described in this study diffract to higher resolution than those in previously reported trials.

Use of the cell wall precursor lipid II by a pore-forming peptide antibiotic

Resistance to antibiotics is increasing in some groups of clinically important pathogens. For instance, high vancomycin resistance has emerged in enterococci. Promising alternative antibiotics are the peptide antibiotics, abundant in host defense systems, which kill their targets by permeabilizing the plasma membrane. These peptides generally do not act via specific receptors and are active in the micromolar range. Here it is shown that vancomycin and the antibacterial peptide nisin Z use the same target: the membrane-anchored cell wall precursor Lipid II. Nisin combines high affinity for Lipid II with its pore-forming ability, thus causing the peptide to be highly active (in the nanomolar range).

The lantibiotic nisin, a special case or not?

Nisin is a 34-residue-long peptide belonging to the group A lantibiotics with antimicrobial activity against Gram-positive bacteria. The presence of dehydrated residues and lanthionine rings (thioether bonds) in nisin, imposing structural restrains on the peptide, make it an interesting case for studying the mode of action. In addition, the relatively high activity (nM range) of nisin against Gram-positive bacteria indicates that nisin may be a special case in the large family of pore-forming peptides antibiotics. In this review, we attempted to dissect the mode of action of nisin concentrating on studies that used model membranes or biological membranes. The picture that emerges suggests that in model membrane systems, composed of only phospholipids, nisin behaves similar to the antimicrobial peptide magainin, albeit with an activity that is much lower as compared to its activity towards biological membranes. This difference can be contributed to a missing factor which nisin needs for its high activity. Novel results have identified the factor as Lipid II, a precursor in the bacterial cell wall synthesis. The special high affinity interaction of nisin with Lipid II resulting in high activity and the active role of Lipid II in the pore-formation process make nisin a special case.

Expression, isolation, and characterization of a chloroplast targeting peptide

For the first time a method is described in which an N-terminal targeting peptide is isolated from Escherichia coli. After overexpression, purification, and cleavage of a fusion protein the protease-sensitive transit peptide from the chloroplast precursor protein preferredoxin could be isolated by HPLC. It was characterized by N-terminal amino acid sequencing and electrospray mass spectrometry. Its functionality was suggested by in vitro import competition experiments with isolated pea chloroplasts, in which the isolated peptide inhibited the import of radioactively labeled preferredoxin. Results from import competition experiments performed with a transit peptide deletion mutant suggested that the four extreme C-terminal amino acids lack information to interact with the chloroplast import machinery.

Transbilayer movement of phosphatidylcholine in the mitochondrial outer membrane of Saccharomyces cerevisiae is rapid and bidirectional

The process of transmembrane movement of phosphatidylcholine (PC) across the outer membrane of mitochondria was investigated in vitro in mitochondrial outer membrane vesicles (OMV) from the yeast Saccharomyces cerevisiae. Phosphatidylcholine-transfer protein (PC-TP) was used to extract radiolabeled PC from OMV, with small unilamellar vesicles serving as acceptor system. Endogenously radiolabeled PC synthesized either via the CDP-choline pathway or via methylation of phosphatidylethanolamine can be extracted completely from the OMV with a t(1/2) of 1 min or less at 30 degrees C. The size of the pool of PC in OMV available for exchange by PC-TP is not affected by pretreatment of the OMV with proteinase K or sulfhydryl reagents. In the reverse experiment where radiolabeled PC was introduced into the OMV, similar characteristics for the exchange were found. The accessibility of labeled PC to externally added phospholipase A(2) was used as a measure for its transmembrane distribution. It was found that PC is not exclusively located in the outer leaflet of the OMV. Only 30-35% can be degraded in intact OMV by phospholipase A(2), irrespective of whether the PC is introduced by PC-TP or endogenously synthesized via either of the pathways of biosynthesis. The results demonstrate the occurrence of rapid bidirectional transbilayer movement of both endogenous and in vitro introduced PC in OMV. Furthermore, there appears to be no preference for mitochondrial import of PC synthesized by either of the pathways in vivo.

Blistering of langmuir-blodgett bilayers containing anionic phospholipids as observed by atomic force microscopy

Asymmetric bilayers of different phospholipid compositions have been prepared by the Langmuir-Blodgett (L-B) method, and imaged by atomic force microscopy (AFM). Such bilayers can function as a model for biological membranes. The first leaflet consisted of zwitterionic phospholipids phosphatidylcholine (PC) or phosphatidylethanolamine (PE). The second leaflet consisted of the anionic phospholipid phosphatidylglycerol (PG), in either the condensed or liquid phase or, for comparison, of PC. Different bilayers showed different morphology. In all bilayers defects in the form of holes were present. In some bilayers with a first leaflet consisting of PC, polygonal line-shaped defects were observed, whereas when the first leaflet consisted of PE, mainly round defects were seen. Not only the shape, but also the amount of defects varied, depending on the condition and the composition of the second leaflet. In most of the PG-containing systems the defects were surrounded by elevations, which reversibly disappeared in the presence of divalent cations. This is the first time that such elevations have been observed on phospholipid bilayers. We propose that they are induced by phospholipid exchange between the two leaflets around the defects, leading to the presence of negatively charged phospholipids in the first leaflet. Because the substrate is also negatively charged, the bilayer around the edges is repelled and lifted up. Since it was found that the elevations are indeed detached from the substrate, we refer to this effect as bilayer blistering.

Interaction mode specific reorganization of gel phase monoglyceride bilayers by beta-lactoglobulin

The interaction between beta-lactoglobulin and sonicated aqueous dispersions of the gel phase forming monoglyceride monostearoylglycerol were studied using isothermal titration calorimetry, direct binding experiments, differential scanning calorimetry, leakage of a fluorescent dye and solid-state (31)P- and (2)H-NMR. In the absence of a charged amphiphile, monostearoylglycerol forms a precipitate. Under these conditions, no interaction with beta-lactoglobulin was observed. In the presence of the negatively charged amphiphile dicetylphosphate, the gel phase monostearoylglycerol formed stable and closed, probably unilamellar, vesicles with an average diameter of 465 nm. beta-Lactoglobulin interacts with these bilayer structures at pH 4, where the protein is positively charged, as well as at pH 7 where the protein is negatively charged. Under both conditions of pH, the binding affinity of beta-lactoglobulin is in the micromolar range as observed with ITC and the direct binding assay. At pH 4, two binding modes were found, one of which is determined with ITC while the direct binding assay determines the net result of both. The first binding mode is observed with ITC and is characterized by a large binding enthalpy, a decreased enthalpy of the MSG L(beta) to L(alpha) phase transition and leakage of a fluorescent dye. These characteristics are explained by a beta-lactoglobulin induced partial L(beta) to coagel phase transition that results from a specific electrostatic interaction between the protein and the charged amphiphile. This explanation is confirmed by solid-state (2)H-NMR using 1-monostearoylglycerol with a fully deuterated acyl chain. Upon interaction with beta-lactoglobulin, the isotropic signal in the (2)H-NMR spectrum of the monostearoylglycerol-dicetylphosphate mixture partially transforms into a broad anisotropic signal which could be assigned to coagel formation. The second binding mode probably results from an aspecific electrostatic attraction between the negatively charged bilayer and the positively charged protein and causes the precipitation of the dispersion. At pH 7, only the first binding mode is observed.

Domain structure and lipid interaction of recombinant yeast Tim44

Tim44 is an essential component of the machinery that mediates the translocation of nuclear-encoded proteins across the mitochondrial inner membrane. It functions as a membrane anchor for the ATP-driven protein import motor whose other subunits are the mitochondrial 70-kDa heat-shock protein (mhsp70) and its nucleotide exchange factor, mGrpE. To understand how this motor is anchored to the inner membrane, we have overexpressed Tim44 in Escherichia coli and studied the properties of the pure protein and its interaction with model lipid membranes. Limited proteolysis and analytical ultracentrifugation indicate that Tim44 is an elongated monomer with a stably folded C-terminal domain. The protein binds strongly to liposomes composed of phosphatidylcholine and cardiolipin but only weakly to liposomes containing phosphatidylcholine alone. Studies with phospholipid monolayers suggest that Tim44 binds to phospholipids of the mitochondrial inner membrane both by electrostatic interactions and by penetrating the polar head group region.

Different membrane anchoring positions of tryptophan and lysine in synthetic transmembrane alpha-helical peptides

Specific interactions of membrane proteins with the membrane interfacial region potentially define protein position with respect to the lipid environment. We investigated the proposed roles of tryptophan and lysine side chains as "anchoring" residues of transmembrane proteins. Model systems were employed, consisting of phosphatidylcholine lipids and hydrophobic alpha-helical peptides, flanked either by tryptophans or lysines. Peptides were incorporated in bilayers of different thickness, and effects on lipid structure were analyzed. Induction of nonbilayer phases and also increases in bilayer thickness were observed that could be explained by a tendency of Trp as well as Lys residues to maintain interactions with the interfacial region. However, effects of the two peptides were remarkably different, indicating affinities of Trp and Lys for different sites at the interface. Our data support a model in which the Trp side chain has a specific affinity for a well defined site near the lipid carbonyl region, while the lysine side chain prefers to be located closer to the aqueous phase, near the lipid phosphate group. The information obtained in this study may further our understanding of the architecture of transmembrane proteins and may prove useful for refining prediction methods for transmembrane segments.

Delta psi stimulates membrane translocation of the C-terminal part of a signal sequence

For several proteins in Escherichia coli it has been shown that the protonmotive force (pmf) dependence of translocation can be varied with the signal sequence composition, suggesting an effect of the pmf on the signal sequence. To test this possibility, we analyzed the effect of the membrane potential on translocation of the signal sequence. For this purpose, a precursor peptide was used (SP+7), corresponding to the signal sequence of PhoE with the first seven amino acids of the mature part that can be processed by purified leader peptidase. Translocation was studied in pure lipid vesicles containing leader peptidase, with its active site inside the vesicles. In the presence of a positive inside Delta psi, the amount of processing of SP+7 was significantly higher than without a Delta psi, indicating that the translocation of the cleavage region is stimulated by Delta psi. Replacement of the helix-breaking glycine residue at position -10 in the signal sequence for a leucine abolished the effect of Delta psi on the translocation of the cleavage region. It is concluded that Delta psi directly acts on the wild type signal sequence by stimulating the translocation of its C terminus. We propose that Delta psi acts on the signal sequence by stretching it into a transmembrane orientation.

The structural flexibility of the preferredoxin transit peptide

In order to obtain insight into the structural flexibility of chloroplast targeting sequences, the Silene pratensis preferredoxin transit peptide was studied by circular dichroism and nuclear magnetic resonance spectroscopy. In water, the peptide is unstructured, with a minor propensity towards helix formation from Val-9 to Ser-12 and from Gly-30 to Ser-40. In 50% (v/v) trifluoroethanol, structurally independent N- and C-terminal helices are stabilized. The N-terminal helix appears to be amphipathic, with hydrophobic and hydroxylated amino acids on opposite sides. The C-terminal helix comprises amino acids Met-29-Gly-50 and is destabilized at Gly-39. No ordered tertiary structure was observed. The results are discussed in terms of protein import into chloroplasts, in which the possible interactions between the transit peptide and lipids are emphasized.

Isolation and characterization of highly purified mitochondrial outer membranes of the yeast Saccharomyces cerevisiae (method)

Mitochondrial outer membrane vesicles (OMV) from the yeast Saccharomyces cerevisiae were prepared by osmotic swelling and mechanical disruption of mitochondria that had been isolated at pH 6.0 and purified by density gradient centrifugation. The OMV were obtained in a yield of 1% (protein/protein) with respect to the mitochondria. The OMV were shown to be essentially free of mitochondrial inner membrane protein markers, while contamination with endoplasmic reticulum was around 5% (protein-based). The very low phosphatidylserine synthase activity present in the OMV preparation indicated that contamination with mitochondria-associated membranes (MAM) was negligible. The resistance of the outer membrane protein Tom40 to digestion by trypsin demonstrated the sealed nature and right-side out orientation of the OMV. Analysis of the phospholipid composition revealed that the contents of phosphatidylcholine and phosphatidylinositol are higher and the content of phosphatidylethanolamine is lower in the mitochondrial outer membrane as compared to whole mitochondria. Cardiolipin is largely depleted in the OMV.

An investigation into the lipid interactions of peptides corresponding to the C-terminal anchoring domains of Escherichia coli penicillin-binding proteins 4, 5 and 6

The Escherichia coli low molecular mass penicillin-binding proteins PBP4, PBP5 and PBP6 are DD-peptidases involved in murein biosynthesis. It has been suggested that these proteins may be anchored to the periplasmic face of the inner membrane via their C termini. Here, peptide homologues (P4, P5 and P6) of the PBP4, PBP5 and PBP5 C-terminal regions have been used to investigate potential protein-lipid interactions involved in this anchoring mechanism. Surface pressure changes observed for the interactions of P5 and P6 with a range of monolayers indicated that the peptides are membrane interactive and that the interactions proceeded via predominantly hydrophobic forces with only minor requirements for anionic lipid. In contrast, P4 interactions with monolayers appeared to proceed via predominantly electrostatic forces with a major requirement for anionic lipid. The lipid interactions of all three peptides were generally enhanced by low pH and for P5 and P6 were in the range of 10-15 mN m-1 whereas for P4 interactions they were in the range of 3-7 mN m-1. CD analysis implied the presence of alpha-helical structure in P5 and P6 and molecular area determinations implied that P4 may also possess helical architecture in the presence of dioleoylphosphatidylglycerol monolayers. Overall, our results support the view that C-terminal amphiphilic alpha-helices are involved in the membrane anchoring of PBP5 and PBP6 and suggest that a similar mechanism could contribute to PBP4-membrane anchoring. Furthermore, we have speculated that the presence of cationic residues in the hydrophilic face of these alpha-helices may help facilitate membrane interaction.

Pore formation by nisin involves translocation of its C-terminal part across the membrane

Nisin is an amphiphilic peptide with a strong antimicrobial activity against various Gram-positive bacteria. Its activity results from permeabilization of bacterial membranes, causing efflux of cytoplasmic compounds. To get information on the molecular mechanism of membrane permeabilization, a mutant of nisin Z containing the C-terminal extension Asp-(His)6 was produced. The biological and anionic lipid-dependent membrane activity of this peptide was very similar to that of nisin Z. Analysis of the pH dependence of model membrane interactions with the elongated peptide indicated the importance of electrostatic interactions of the C-terminus with the target membrane for membrane permeabilization. Most importantly, the membrane topology of the C-terminus of the molecule could be determined by trypsin digestion experiments, in which trypsin was encapsulated in the lumen of large unilamellar vesicles. The results show that the C-terminal part of the peptide translocates across model membranes. The pH and anionic lipid dependence of translocation closely paralleled the results of membrane permeabilization studies. Binding of nickel ions to the histidines blocked translocation of the C-terminus and concomitantly resulted in a 4-fold reduced capacity to induce K+ leakage. The results demonstrate for the first time that pore formation of nisin involves translocation of the C-terminal region of the molecule across the membrane.

Fructans interact strongly with model membranes

Bacterial fructans with a high degree of polymerisation cause a very large increase in surface pressure of lipid monolayers at the air-water interface with a broad range of lipids, including phosphatidylethanolamine and several types of phosphatidylcholines. The surface active effect of fructans contrasts strongly with the maximal effects observed for trehalose, sucrose and glucose under comparable conditions (20 and 0.6 mN/m for fructans and the other sugars, respectively). The results demonstrate a profound and specific membrane interaction of the fructans which is probably very different from the effect of the smaller carbohydrates. The fructan concentrations used in this study are within the physiological range observed in fructan-accumulating plants. The suggested water-stress protective effect of fructans may be induced by membrane-fructan interaction which prevent lipid condensation and phase transitions to take place.

Translocase-bound SecA is largely shielded from the phospholipid acyl chains

Protein translocation in Escherichia coli is mediated by the SecA ATPase bound to the SecYEG membrane protein complex. SecA translocation ATPase activity as well as protein translocation is dependent on the presence of negatively charged lipids. By using a phospholipid with an acyl chain linked photoactivatable group, the lipid accessibility of SecA bound at the translocase was explored. SecA bound to lipid vesicles containing negatively charged lipids was found to be readily accessible for labeling by the photoactivatable phospholipid. The presence of an excess amount of SecYEG complex resulted in a remarkable reduction in the amount of lipid-accessible SecA irrespective of the nucleotide-bound form of SecA. These data demonstrate that the SecYEG-bound SecA is largely shielded from the phospholipid acyl chains and suggest the presence of two distinct pools of membrane-bound SecA that differ in the degree of lipid association.

Rapid transmembrane movement of newly synthesized phosphatidylethanolamine across the inner membrane of Escherichia coli

For the first time the transmembrane movement of an endogenously synthesized phospholipid across the inner membrane of E. coli is reported. [14C]phosphatidylethanolamine (PE) was biosynthetically introduced into inner membrane vesicles from the PE-deficient strain AD93, by reconstitution with the enzyme phosphatidylserine (PS) synthetase. Upon addition of wild type cell lysate containing PS synthetase, and the metabolic substrates CTP and [14C]serine to inside-out vesicles from AD93, [14C]PS was synthesized, which was for the most part converted into [14C]PE. [14C]PE was introduced in right-side out vesicles by enclosing PS synthetase and CTP in the vesicle lumen and adding [14C]serine. The newly synthesized [14C]PE immediately equilibrated over both membrane leaflets (t1/2 less than one min), as determined by its accessibility toward the amino-reactive chemical fluorescamine. In both inside- out and right-side out vesicles, a 35-65% distribution was found of the newly synthesized PE over the cytoplasmic and periplasmic leaflet, respectively. The transport process of PE was not influenced by the presence of ATP or the proton motive force in inside out vesicles. Pretreatment of both types of vesicles with sulfhydryl reagents, or of right-side out vesicles with proteinase K, did not affect the rate and extent of the transmembrane distribution of the newly synthesized PE.

Phosphatidylethanolamine mediates insertion of the catalytic domain of leader peptidase in membranes

Leader peptidase is an integral membrane protein of E. coli and it catalyses the removal of most signal peptides from translocated precursor proteins. In this study it is shown that when the transmembrane anchors are removed in vivo, the remaining catalytic domain can bind to inner and outer membranes of E. coli. Furthermore, the purified catalytic domain binds to inner membrane vesicles and vesicles composed of purified inner membrane lipids with comparable efficiency. It is shown that the interaction is caused by penetration of a part of the catalytic domain between the lipids. Penetration is mediated by phosphatidylethanolamine, the most abundant lipid in E. coli, and does not seem to depend on electrostatic interactions. A hydrophobic segment around the catalytically important residue serine 90 is required for the interaction with membranes.

The orientation of nisin in membranes

Nisin is a 34 residue long peptide belonging to the group A lantibiotics with antimicrobial activity against Gram-positive bacteria. The antimicrobial activity is based on pore formation in the cytoplasmic membrane of target organisms. The mechanism which leads to pore formation remains to be clarified. We studied the orientation of nisin via site-directed tryptophan fluorescence spectroscopy. Therefore, we engineered three nisin Z variants with unique tryptophan residues at positions 1, 17, and 32, respectively. The activity of the tryptophan mutants against Gram-positive bacteria and in model membrane systems composed of DOPC or DOPG was established to be similar to that of wild type nisin Z. The tryptophan fluorescence emission maximum showed an increasing blue-shift upon interaction with vesicles containing increased amounts of DOPG, with the largest effect for the 1W peptide. Studies with the aqueous quencher acrylamide showed that all tryptophans became inaccessible from the aqueous phase in the presence of negatively charged lipids in the vesicles. From these results it is concluded that anionic lipids mediate insertion of the tryptophan residues in at least three positions of the molecule into the lipid bilayer. The depth of insertion of the tryptophan residues was determined via quenching of the tryptophan fluorescence by spin-labeled lipids. The results showed that the depth of insertion was dependent on the amount of negatively charged lipids. In membranes containing 50% DOPG, the distances from the bilayer center were determined to be 15.7, 15.0, and 18.4 A for the tryptophan at position 1, 17, and 32, respectively. In membranes containing 90% DOPG, these distances were calculated to be 10.8, 11.5, and 13.1 A, respectively. These results suggest an overall parallel average orientation of nisin in the membrane, with respect to the membrane surface, with the N-terminus more deeply inserted than the C-terminus. These data were used to model the orientation of nisin in the membrane.

Lipid polymorphism and biomembrane function

In recent years, several major developments have taken place in the biology, physical chemistry and technology of polymorphism of membrane lipids. These include the identification of polymorphic regulation of membrane lipid composition in Escherichia coli, the importance of nonbilayer lipids for protein functioning, the special packing properties of bilayers containing these lipids, and the crystallization of a membrane protein out of three dimensional bilayer networks (lipid cubic phases). These exciting developments bring us closer to understanding the paradox of the lipid bilayer structure of biomembranes and the molecular basis of membrane protein structure and function.