Establishment of the mid-sagittal reference plane for three-dimensional assessment of facial asymmetry: a systematic review : Establishment of the mid-sagittal reference plane: a systematic review

OBJECTIVE

To systematically review the literature for mid-sagittal plane establishment approaches to identify the most effective method for constructing the mid-sagittal plane for the evaluation of facial asymmetry.

MATERIALS AND METHODS

Six electronic databases (PubMed, Medline (via Ovid), EMBASE (via Ovid), Cochrane Library, Web of Science, and Scopus) and grey literature were searched for the studies that computed the mid-sagittal reference plane three-dimensionally, using a combination of MeSH terms and keywords. The methodological quality and the level of evidence for the included studies were analyzed using QUADAS-2 and GRADE, respectively.

RESULTS

The preliminary search yielded 6746 records, of which 42 articles that met the predefined inclusion criteria were included in the final analysis. All the included articles reported the construction of the mid-sagittal reference plane (MSP) using varied methods. The risk of bias and concerns regarding the applicability of the included studies were judged to be 'low'. The level of evidence was determined to be 'low' for the effectiveness of the technique and 'moderate' for the ease of clinical applicability.

CONCLUSION

Despite methodological heterogeneity, this review substantiates the comparable efficacy of cephalometric and morphometric MSP construction methods. A fully automated morphometric MSP holds promise as a viable option for routine clinical use. Nevertheless, future prospective studies with an emphasis on the impact, accuracy, and clinical applicability of MSP construction techniques in cases of facial asymmetry are required.

CLINICAL RELEVANCE

The present review will assist clinicians in selecting the most suitable method for MSP construction, leading to improved treatment planning and ultimately more favorable treatment outcomes.

An innovative analysis of nasolabial dynamics of surgically managed adult patients with unilateral cleft lip and palate using 3D facial motion capture

AIM

To compare dynamic nasolabial movement between end-of-treatment cleft and a matched non-cleft group in adult patients.

MATERIALS AND METHODS

Thirteen treated adult participants with unilateral cleft lip and palate had images taken using a facial motion capture system performing a maximum smile. Seventeen landmarks were automatically tracked. For each landmark pair, on either side of the midline, changes in the x, y, and z directions were used to analyze the magnitude of displacement and path of motion. An asymmetry score was developed at rest, mid-smile, and maximum smile to assess the shape of the mouth and/or nose.

RESULTS

At maximum smile, displacement of right and left cheilion was clinically and statistically (p < 0.05) less in the cleft group. The lip asymmetry score was greater (p < 0.05) at each time point in the cleft group using the clinical midline. Using Procrustes superimposition, the differences were significant (p < 0.05) only at rest and mid-smile. The alar bases were displaced significantly less (p < 0.05) in the z direction in the cleft group. The asymmetry score of the alar base was significantly higher using the clinical midline than using Procrustes superimposition in patients with cleft conditions (p < 0.001). In the cleft group, at maximum smile, the right and left cristae philter moved significantly less (p < 0.05) in the x and z directions.

CONCLUSIONS

There was an increase in asymmetry score of the corners of the mouth and alar bases from rest to maximum smile. The lips were similar in shape but oriented differently in the faces of patients with cleft conditions than in individuals without those conditions.

Three-dimensional assessment of facial asymmetry in class III subjects, part 2: evaluating asymmetry index and asymmetry scores

OBJECTIVES

To evaluate the outcomes of corrective surgical treatment for craniofacial asymmetry using four different methods with the aim of developing the best technique for craniofacial asymmetry assessment.

MATERIALS AND METHODS

CBCT images of twenty-one class III subjects with surgically corrected craniofacial asymmetry and twenty-one matched controls were analyzed. Twenty-seven hard tissue landmarks were used to quantify asymmetry using the following methodologies: the asymmetry index (AI), asymmetry scores based on the clinically derived midline (CM), Procrustes analysis (PA), and modified Procrustes analysis (MPA).

RESULTS

Modified Procrustes analysis successfully identified pre-operative asymmetry and revealed severe asymmetry at the mandibular regions compared to controls, which was comparable to the asymmetry index and clinically derived midline methods, while Procrustes analysis masked the asymmetric characteristics. Likewise, when comparing the post-surgical outcomes, modified Procrustes analysis not only efficiently determined the changes evidencing decrease in facial asymmetry but also revealed significant residual asymmetry in the mandible, which was congruent with the asymmetry index and clinically derived midline methods but contradictory to the results shown by Procrustes analysis.

CONCLUSIONS

In terms of quantifying cranio-facial asymmetry, modified Procrustes analysis has evidenced to produce promising results that were comparable to the asymmetry index and the clinically derived midline, making it a more viable option for craniofacial asymmetry assessment.

CLINICAL RELEVANCE

Modified Procrustes analysis is proficient in evaluating cranio-facial asymmetry with more valid clinical representation and has potential applications in assessing asymmetry in a wide spectrum of patients, including syndromic patients.

The reliability of analytical reference lines for determining esthetically pleasing lip position: An assessment of consistency, sensitivity, and specificity

INTRODUCTION

This study aimed to identify a simple yet reliable soft-tissue parameter for the clinical determination of esthetic lip position by investigating the most consistent reference lines and assessing their sensitivity and specificity.

METHODS

A total of 5745 records from Chinese patients aged >18 years were screened. In part I of the study, lateral view photographs of 96 subjects (33 males, 63 females) with esthetic facial profiles were selected. The profile esthetics of each photograph was first scored by 52 dental students, followed by 97 laypeople on a 5-point attractiveness scale. For the top 25% of photographs with the highest score for each sex (8 males, 16 females), the consistency of 6 commonly used reference lines were assessed to determine the esthetic lip position. In part II of the study, lip positions relative to Steiner's (S) and Ricketts' (E) lines in the profile photographs of 86 patients (43 males, 43 females) deemed to have an esthetically unpleasing profile were compared with those in 86 Chinese movie star idols (43 males, 43 females).

RESULTS

In part I of the study, the S, E, and Burstone's (B) lines exhibited the lowest standard deviations for the upper and lower lips. B line was excluded from further analysis because of its higher mean absolute values, and S and E lines were used for the subjective assessment in part II of the study. In part II, the S line showed a sensitivity of 86.0% and 86.0% and a specificity of 81.4% and 83.7% for males and females, respectively. In contrast, the E line presented a sensitivity of 88.4% and 93.0% and a specificity of 79.1% and 74.4% for males and females, respectively.

CONCLUSIONS

S, E, and B lines were the most consistent soft-tissue parameters among both sexes; however, because of the smaller absolute values, the S line would be more convenient among the 3 for a quick clinical assessment of lip position. Moreover, the performance of both S and E lines was similar among both sexes, which supports using these lines in assessing the esthetic lip position.

Do parents of adolescent patients undergoing fixed appliance treatment recall more information using written material or an animated video? A randomized controlled trial

Objectives

This "2-arm parallel" trial investigated the recall of information pertinent to obtaining informed consent of parents of orthodontic patients using; either written material and verbal support or an animation.

Materials and methods

Parents of patients, aged 12-18 years, about to undergo fixed applaince treatment, were randomized to either receive information by leaflet or by watching an animation. The parents were asked a series of open-ended questions immediately and one year later. The outcome measure was the total median questionnaire score immediately (T₀) and one year later (T₁). A Mann Whitney U test was performed to test for differences between T₀ and T₁.

Results

31 parents were randomized into the leaflet group and 33 in to the animation group. The median leaflet group score was 81 (IQR = 27) at the time of consent (T₀) and 87 (IQR = 29) a year later (T₁), compared to a median score of 76 (IQR = 23) for the animation group at T₀ and 87 (IQR = 32) at T_1. Statistically, there was no difference in the questionnaire score at (T₀) (p = 0.567) and at (T₁) (p = 0.522). The average time spent with the clinician in the leaflet group was an additional 9 min in the animation group.

Conclusion

The use of a leaflet and verbal information or an animation are equivalent in providing information to the parents of orthodontic patients. The use of an animation reduces the clinical time needed to deliver the information.

The validity of using profile predictions for class III patients planned for bimaxillary orthognathic surgery

This study assessed whether preoperative class III patients could recreate their facial difference based on a profile photograph. Twenty class III pre-surgery bimaxillary orthognathic patients used CASSOS (SoftEnable Technology Ltd.) to manipulate a distorted soft tissue image of them until they felt it resembled their current soft tissue profile. Patients were able to move their upper lip and lower chin backward and forwards, as well as the lower chin up and down. Differences in the mean absolute distance between the patient-perceived position of the upper lip (Labrale superious) and chin (Pogonion) and the actual position of their upper lip and chin were measured on two occasions. Intra-patient reproducibility was found to be excellent (ICC 0.93 to 0.98). All differences were statistically significantly greater than 3mm, and would be clinically significant. Patients were better at re-creating their AP chin position rather than their AP upper lip and vertical chin positions. Approximately half of patients undergoing surgical correction of their class III skeletal pattern were unable to correctly identify their pre-surgical facial profile. Given the lack of awareness of their profile, this questions the validity of using profile planning for informed consent.

Three-dimensional assessment of facial asymmetry in Class III subjects. Part 1: a retrospective study evaluating postsurgical outcomes

OBJECTIVE

The present study aimed to determine the site and severity of maxillomandibular asymmetry before and after orthognathic surgery in asymmetric patients.

MATERIALS AND METHODS

Presurgery and postsurgery cone beam computed tomography (CBCT) data of 21 facial asymmetry patients (7 males and 14 females, mean age: 23.0 ± 3.36 years) with soft tissue chin deviation ≥ 3 mm who had undergone bimaxillary surgery were evaluated. Seven midline and twenty bilateral hard tissue landmarks were identified for the evaluation of facial asymmetry and outcomes were assessed against age- and gender-matched control subjects.

RESULTS

In the asymmetry group, bilateral landmarks exhibited significant deviation in the mandible and midface regions. Before surgery, asymmetry was more severe at the mandibular midline and sites close to it, in the asymmetry group. Bimaxillary surgery proved to be highly effective, with a significant correction of the menton to a clinically normal value (2.90 mm, p < 0.001). After surgery, significant residual asymmetry was observed at the mental foramen (p = 0.001) in the R-L direction. Moreover, significant asymmetry persisted at the sigmoid notch (p = 0.001) in the S-I direction.

CONCLUSIONS

Mandibular midline landmarks and chin peripheral regions contribute significantly to overall facial asymmetry characteristics. Despite significant correction after bimaxillary surgery, asymmetry persisted at several sites, thereby requiring secondary correction. Comprehensive 3D presurgical planning is central for asymmetry correction in a single surgery.

CLINICAL RELEVANCE

The present study specifies the location of residual asymmetry sites and advocates the correction of those sites during initial surgery.

A comparative assessment of information recall and comprehension between conventional leaflets and an animated video in adolescent patients undergoing fixed orthodontic treatment: A single-center, randomized controlled trial

INTRODUCTION

The objective of this 2-arm parallel trial was to investigate the recall and comprehension of the information of orthodontic patients undergoing fixed orthodontic treatment using either the verbal explanation supported with the British Orthodontic Society (BOS) leaflet or 3-dimensional (3D) animated content.

METHODS

Patients aged 12-18 years, with no relevant medical history or learning and reading difficulties, who were to undergo orthodontic treatment, were randomized to receive information about fixed orthodontic treatment, using either verbal explanation supported with the BOS leaflet or 3D animated content on the basis of the BOS leaflet. Randomization was performed by block randomization; block size of 4 was used, from which 6 blocks with 6 different sequences (AABB, ABBA, ABAB, BBAA, BAAB, BABA). The blinded author asked patients a series of open-ended questions. The primary outcome measure was the total score of the questions. An independent 2 sample t test was conducted to determine if there was a statistical difference in total questions score between the conventional method (verbal and leaflet) and the 3D animation at the time of consent taking (T0) and again 1 year later (T1). The secondary outcome measure was the time spent by the clinician delivering the information to the patient.

RESULTS

Thirty-two patients were randomized into each group. After 1 year, 1 patient was lost in each group. At the time of consent, the conventional group scored 79.1 ± 18.4 compared with 76.4 ± 12.8 for the 3D animation group with no statistically significant difference (95% confidence interval, -11.0 to 5.3), (P = 0.492). One year later, again, there was no statistically significant difference (P = 0.639) between the conventional group (75.6 ± 12.3) and the 3D animation group (74.4 ± 9.0) (95% confidence interval, -7.0 to 4.4). The average exposure time to the educational intervention in the conventional group was 8.5 minutes more than the 3D animation group.

CONCLUSIONS

The use of 3D animation or verbal and leaflet information is relatively equivalent in transferring knowledge to the orthodontic patient. The use of a 3D animated video reduces the clinician time needed in the clinic to deliver information to the patients and also allows multiple views and better suits the younger generation. Patients undergoing short- or long-term orthodontic treatment do not recall root damage as a risk of orthodontic treatment, which requires special attention from the orthodontist to reinforce this information.

REGISTRATION

This trial was not registered.

PROTOCOL

The protocol was not published before trial commencement.

Accuracy of capturing oncology facial defects with multimodal image fusion versus laser scanning

STATEMENT OF PROBLEM

Fabrication of conventional facial prostheses is a labor-intensive process which traditionally requires an impression of the facial defect and surrounding tissues. Inaccuracies occur during the facial moulage because of soft-tissue compression, the patient's reflex movements, or the lack of support for the impression material. A variety of 3D imaging techniques have been introduced during the production of facial prostheses. However, the accuracy of the different imaging techniques has not been evaluated sufficiently in this clinical context.

PURPOSE

The purpose of this in vitro study was to compare the difference in accuracy of capturing oncology facial defects with multimodal image fusion and laser scanning against a cone beam computed tomography (CBCT) reference scan.

MATERIAL AND METHODS

Ten gypsum casts of oncology facial defects were acquired. To produce reference models, a 3D volumetric scan was obtained using a CBCT scanner and converted into surface data using open-source medical segmentation software. This model was cropped to produce a CBCT mask using an open-source system for editing meshes. The multimodal image fusion model was created using stereophotogrammetry to capture the external facial features and a custom optical structured light scanner to record the defect. The gypsum casts were also scanned using a commercial 3D laser scanner to create the laser-scanned model. Analysis of the best fit of each experimental model to the CBCT mask was performed in MeshLab. The unsigned mean distance was used to measure the absolute deviation of each model from the CBCT mask. A paired-samples t test was conducted to compare the mean global deviation of the 2 imaging modalities from the CBCT masks (α=.05).

RESULTS

A statistically significant difference was found in the mean global deviation between the multimodal imaging model (220 ±50 μm) and the laser-scanned model (170 ±70 μm); (t(9)=2.56, P=.031). The color error maps illustrated that the greatest error was located at sites distant to the prosthesis margins.

CONCLUSIONS

The laser-scanned models were more accurate; however, the mean difference of 50 μm is unlikely to be clinically significant. The laser scanner had limited viewing angles and a longer scan time which may limit its transferability to maxillofacial practice.

An in-vitro study to assess the feasibility, validity and precision of capturing oncology facial defects with multimodal image fusion

AIM

Assess the feasibility, validity and precision of multimodal image fusion to capture oncology facial defects based on plaster casts.

METHODS

Ten casts of oncology facial defects were acquired. To create gold standard models, a 3D volumetric scan of each cast was obtained with a cone beam computed tomography (CBCT) scanner (NewTomVG). This was converted into surface data using open-source medical segmentation software and cropped to produce a CBCT mask using an open-source system for editing meshes. For the experimental model, the external facial features were captured using stereophotogrammetry (DI4D) and the defect was recorded with a custom optical structured light scanner. The two meshes were aligned, merged and resurfaced using MeshLab to produce a fused model. Analysis was performed in MeshLab on the best fit of the fused model to the CBCT mask. The unsigned mean distance was used to measure the absolute deviation of each model from the CBCT mask. To assess the precision of the technique, the process of producing the fused model was repeated to create five models each for the casts representing the best, middle and worst results.

RESULTS

Global mean deviation was 0.22 mm (standard deviation 0.05 mm). The precision of the method appeared to be acceptable although there was variability in the location of the error for the worst cast.

CONCLUSION

This method for merging two independent scans to produce a fused model shows strong potential as an accurate and repeatable method of capturing facial defects. Further research is required to explore its clinical use.

Accuracy of three-dimensional soft tissue predictions in orthognathic surgery after Le Fort I advancement osteotomies

Prediction of postoperative facial appearance after orthognathic surgery can be used for communication, managing patients' expectations,avoiding postoperative dissatisfaction and exploring different treatment options. We have assessed the accuracy of 3dMD Vultus in predicting the final 3-dimensional soft tissue facial morphology after Le Fort I advancement osteotomy. We retrospectively studied 13 patients who were treated with a Le Fort I advancement osteotomy alone. We used routine cone-beam computed tomographic (CT) images taken immediately before and a minimum of 6 months after operation, and 3dMD Vultus to virtually reposition the preoperative maxilla and mandible in their post operative positions to generate a prediction of what the soft tissue would look like. Segmented anatomical areas of the predicted mesh were then compared with the actual soft tissue. The means of the absolute distance between the 90th percentile of the mesh points for each region were calculated, and a one-sample Student's t test was used to calculate if the difference differed significantly from 3 mm.The differences in the mean absolute distances between the actual soft tissue and the prediction were significantly below 3 mm for all segmented anatomical areas (p < 0.001), and ranged from 0.65 mm (chin) to 1.17 mm (upper lip). 3dMD Vultus produces clinically satisfactory 3-dimensional facial soft tissue predictions after Le Fort I advancement osteotomy. The mass-spring model for prediction seems to be able to predict the position of the lip and chin, but its ability to predict nasal and paranasal areas could be improved.

Magnitude and reproducibility of forces generated by clinicians during laceback placement

OBJECTIVE

To determine the magnitude and reproducibility of forces generated by clinicians during laceback placement using a force-measuring typodont.

SETTING

An in vitro investigation.

MATERIALS AND METHODS

An in vitro typodont model was developed, which incorporated strain gauges attached to a personal computer to allow measurement of the force generated on application of lacebacks. Ten operators were instructed to place lacebacks five times, on two separate occasions (T1 and T2). Inter-operator and intra-operator forces produced at T1 and T2 were compared.

MAIN OUTCOME MEASURES

Forces generated by laceback placement.

RESULTS

The forces generated by clinicians ranged from 0 to 11.1 N. There were significant differences in the mean forces generated by the different operators (P < 0.001), with differences between time points not being consistent across all operators (P < 0.001). Some operators were more consistent than others in the forces generated.

CONCLUSION

In vitro, there was a large inter-operator variation in the forces produced during laceback placement. With the in vitro model used in this study, few operators applied similar forces when placing lacebacks on two separate occasions.

Immediate effects of rapid maxillary expansion on the naso-maxillary facial soft tissue using 3D stereophotogrammetry

BACKGROUND

Rapid maxillary expansion (RME) is used to expand the narrow maxilla. Dental and skeletal affects have previously been reported but few studies have reported on the overlying soft tissue changes. This study reports on the immediate effects of RME on the naso-maxillary facial soft tissue using 3D stereophotogrammetry.

METHODS

Fourteen patients requiring upper arch expansion using RME as part of their full comprehensive orthodontic plan were recruited. Cone beam CT scans and stereophotogrammetry images were taken for each patient; pre-RME activation (T0) and immediately post-RME expansion (T1). Based on twenty-three landmarks, 13 linear and 3 angular measurements were made from each of the stereophotogrammetry images. A linear measurement at ANS was taken from each CBCT image. Using a Wilcoxon signed rank test, the pre-RME and post-RME measurements were compared.

RESULTS

The mean separation of the anterior nasal spine was 3.8 mm ± 1.2 mm. The largest median increase was in nasal base width (1.6 mm), which was statistically significant (p = 0.001). Changes in the nasal dorsum height, nasal tip protrusion, philtrum width, and upper lip length were not statistically significant (p < 0.05). No significant differences were observed in the nostril linear measurements, expect for columella width (p = 0.009). Naso-labial angle decreased but was not statistically significant (p = 0.276). The only statically significant angular change was an increase in the nasal tip displacement angle (p = 0.001).

CONCLUSION

Rapid maxillary expansion produces subtle changes in the naso-maxillary soft tissue complex. There is an increase in nasal base width, retraction and flattening of the nasal tip. These changes are small, less than 2 mm and variable between patients.

How accurate are rapid prototyped (RP) final orthognathic surgical wafers? A pilot study

Computer packages have been introduced to simulate the movements of the jaw in three dimensions to facilitate planning of treatment. After final 3-dimensional virtual planning, a rapid prototype wafer can be manufactured and used in theatre. Our aim was to assess the accuracy of rapid prototyping of virtual wafers derived from laser scanned dental models using CAD/CAM software. Upper and lower plaster models from 10 orthognathic patients, the articulated models, and the conventional wafers were scanned. The virtual wafers were made from CAD/CAM software, and printed on a stereolithographic printer. We also scanned the articulated models with rapid prototype wafers in place. The validity of the final rapid prototype wafer was measured by the accuracy with which upper and lower models related to one another. The absolute mean error of the rapid prototype wafer when aligned with the dental models was 0.94 (0.09) mm. The absolute distance of the 2 models articulated by conventional and rapid prototype wafers ranged from 0.04 - 1.73mm. The rapid prototype wafers were able to orientate the upper and lower dental models with an absolute mean error of 0.94 (0.09) mm, but it ranged from 0.04-1.73mm.

The clinical application of three-dimensional motion capture (4D): a novel approach to quantify the dynamics of facial animations

The aim of this pilot study was to evaluate the feasibility of measuring the change in magnitude, speed, and motion similarity of facial animations in head and neck oncology patients, before and after lip split mandibulotomy. Seven subjects (four males, three females) aged 42-80 years were recruited. The subjects were asked to perform four facial animations (maximal smile, lip purse, cheek puff, and grimace) from rest to maximal position. The animations were captured using a Di4D motion capture system, which recorded 60 frames/s. Nine facial soft tissue landmarks were manually digitized on the first frame of the three-dimensional image of each animation by the same operator and were tracked automatically for the sequential frames. The intra-operator digitization error was within 0.4mm. Lip purse and maximal smile animations showed the least amount of change in magnitude (0.2mm) following surgery; speed difference was least for smile animation (-0.1mm/s). Motion similarity was found to be highest for lip purse animation (0.78). This pilot study confirmed that surgery did influence the dynamics of facial animations, and the Di4D capture system can be regarded as a feasible objective tool for assessing the impact of surgical interventions on facial soft tissue movements.

The novel use of three-dimensional surface models to quantify and visualise the immediate changes of the mid-facial skeleton following rapid maxillary expansion

BACKGROUND

The transverse skeletal effects of rapid maxillary expansion (RME) have previously been assessed using cone-beam CT (CBCT). However, to date the majority of studies assess the changes based on two-dimensional slice images, which under utilises the three-dimensional (3D) data captured. This study optimizes the volumetric CBCT data by generating 3D rendered surface models to quantity and visualize the immediate 3D changes of the mid-facial bone surfaces following RME.

METHODS

The sample consisted of 14 patients who required RME prior to fixed appliances. Pre-treatment (T0) and immediate post expansion (T1) CBCT images were taken. Following superimposition the mid face was divided into six anatomical regions. A one-sample t-test was used to determine if the differences between the two surfaces were significantly ≥0.5 mm.

FINDINGS

All regions showed a change following RME ≥ 0.5 mm. The maxillary and nasal bones showed 2.3 mm and 2.4 mm expansion respectively, followed by the zygomatic bones (1.4 mm), 2 cases showing asymmetric expansion.

CONCLUSIONS

The use of 3D surface rendered models allows quantification and visualisation of 3D changes in the mid-facial skeleton at anatomical sites distant of RME activation. Following activation there can be a pan mid-facial expansion, including not only the maxilla but also the nasal lateral bones and zygomas. The response was highly variable and asymmetric expansion can occur.

Three-dimensional image fusion across PET+MRI modalities based on the approach of characteristic coregistration

BACKGROUND AND AIMS

Because there is no complete three-dimensional (3D) hybrid detector integrated PET+MRI internationally, this study aims to investigate a registration approach for a two-dimensional (2D) hybrid based on characteristic localization to achieve a 3D fusion from the images of PET and MRI as a whole.

METHODS

A cubic-oriented scheme of "9-point and 3-plane" for a coregistration design was verified to be geometrically practical. Through 3D reconstruction and virtual dissection, human internal feature points were sorted to combine with preselected external feature points for matching process. By following the procedure of feature extraction and image mapping, the processes of "picking points to form planes" and "picking planes for segmentation" were executed. Eventually, the image fusion was implemented at the real-time workstation Mimics based on auto-fuse techniques called "information exchange" and "signal overlay".

RESULTS

A complementary 3D image across PET+MRI modalities, which simultaneously present metabolic activities and anatomic structures, was created with a detectable rate of 56%. This is equivalent to the detectable rate of PET+CT or MRI+CT with no statistically significant difference, and it facilitates a 3D vision that is not yet functional for 2D hybrid imaging.

CONCLUSIONS

This cross-modality fusion is doubtless an essential complement for the existing toolkit of a 2D hybrid device. Thus, it would potentially improve the efficiency of diagnosis and therapy for oncology.

Clinical significance of creative 3D-image fusion across multimodalities [PET+CT+MR] based on characteristic coregistration

OBJECTIVE

To investigate a registration approach for 2-dimension (2D) based on characteristic localization to achieve 3-dimension (3D) fusion from images of PET, CT and MR one by one.

METHOD

A cubic oriented scheme of"9-point & 3-plane" for co-registration design was verified to be geometrically practical. After acquisiting DICOM data of PET/CT/MR (directed by radiotracer 18F-FDG etc.), through 3D reconstruction and virtual dissection, human internal feature points were sorted to combine with preselected external feature points for matching process. By following the procedure of feature extraction and image mapping, "picking points to form planes" and "picking planes for segmentation" were executed. Eventually, image fusion was implemented at real-time workstation mimics based on auto-fuse techniques so called "information exchange" and "signal overlay".

RESULT

The 2D and 3D images fused across modalities of [CT+MR], [PET+MR], [PET+CT] and [PET+CT+MR] were tested on data of patients suffered from tumors. Complementary 2D/3D images simultaneously presenting metabolic activities and anatomic structures were created with detectable-rate of 70%, 56%, 54% (or 98%) and 44% with no significant difference for each in statistics.

CONCLUSION

Currently, based on the condition that there is no complete hybrid detector integrated of triple-module [PET+CT+MR] internationally, this sort of multiple modality fusion is doubtlessly an essential complement for the existing function of single modality imaging.

The validity of a computer-assisted simulation system for orthognathic surgery (CASSOS) for planning the surgical correction of class III skeletal deformities: single-jaw versus bimaxillary surgery

The aim of this study was to assess the accuracy of the two-dimensional profile prediction produced by the computer-assisted simulation system for orthognathic surgery (CASSOS), for the correction of class III facial deformities. Correction was by maxillary advancement (n=17) or bimaxillary surgery (n=16). The mean age was 24 years (range 18-42). The surgical and dental movements obtained from the postoperative cephalogram were used to produce a CASSOS profile prediction, which was compared with the soft-tissue profile. The prediction was superimposed onto the postoperative radiograph, and a coordinate system was used to measure linear differences. For the maxillary advancement group there were statistical differences for three horizontal landmarks: superior labial sulcus (p=0.017), labrale superious (p=0.038) and labiomental fold (p=0.014). In the bimaxillary group only the landmark vertical labrale superious (p=0.002) showed a statistical difference. Generally, CASSOS produced useful profile predictions for maxillary advancement surgery or bimaxillary surgery for Class III patients, although there was considerable individual variation. The main areas of inaccuracy were the lips. The major difference between the two types of surgery was that most of the errors in the maxillary surgery group were in the horizontal direction, whilst for the bimaxillary surgery the errors were mainly in the vertical direction.

Skeletal stability after correction of maxillary hypoplasia by the Glasgow extra-oral distraction (GED) device

Maxillary distraction osteogenesis delivers excellent results, particularly in patients with clefts. In the past, devices such as the conventional facemask and the rigid external distraction device have been used to correct maxillary hypoplasia after a Le Fort I osteotomy. We describe a new device, the Glasgow extra-oral distraction device. The extent of skeletal and dental stability of corrections achieved in 10 patients with maxillary hypoplasia associated with clefts was satisfactory. This device costs little, can be produced in developing countries, and provides effective treatment for severe secondary deformity associated with clefts.

Preliminary assessment of skeletal stability after sagittal split mandibular advancement using a bioresorbable fixation system

We studied skeletal stability during the first year after mandibular advancement and fixation with bioresorbable self-reinforced poly-L-lactide (SR-PLLA) screws in 11 patients by cephalometric measurements. We compared these with a cohort of 11 patients, in whom titanium screws were used for fixation. We found no significant difference between the two groups in the median preoperative cephalometric values and the median changes after operation. There was also no significant difference between the two groups regarding the median extent of relapse 1-year after operation. We conclude that bioresorbable SR-PLLA screws are comparable to metallic screws for fixation of bone after sagittal split mandibular advancement.

Investigations into the use of an ultrasonic chisel to cut bone. Part 2: Cutting ability

OBJECTIVES

Ultrasound may offer a possible alternative to rotary instruments for removing bone. This study was undertaken to analyse in vitro the various factors that influence the cutting of bone by an ultrasonic chisel.

STUDY DESIGN

A block of bovine femur was moved in a longitudinal direction under a stationary ultrasonic chisel. The force and depth of the cut was recorded for cutting rates of 28-112 mm/min and with increasing rake angles of 0 to +20 degrees. The pressure exerted by the chisel was recorded for different cutting rates.

RESULTS

When the cutting rate increases there is a corresponding increase in the downward force which is followed by a decrease in the force at rates greater than 56 mm/min. The depth of the cut increases up to a rate of 56 mm/min after which it decreases. Both the longitudinal and downward forces do not change when the rake angle changes from 0 to +10 degrees. The downward force decreases when the rake angle increases from +10 to +20 degrees.

CONCLUSIONS

The bone is cut slowly with the ultrasonic chisel, but this would assist in precision. Where such an instrument is used for cutting bone the clinicians should be aware that both low forces and cutting rates are required, and the instrument should be held at a low rake angle.

Investigations into the use of an ultrasonic chisel to cut bone. Part 1: Forces applied by clinicians

OBJECTIVES

To measure in vitro the direction and force of applied loads applied by clinicians when using both a conventional slow surgical handpiece (CH) and an ultrasonic chisel (USC) for cutting bone.

STUDY DESIGN

Five clinicians were asked to cut bovine bone using either an USC or a CH. The bone was placed on a force measurement system that could measure both longitudinal and downward loads. The rate of cut was calculated over a fixed time-period and the depth of cut measured using a penetratometer.

RESULTS

The magnitude of the longitudinal forces generated varied between 1.48 and 3.22 N (USC) and 0.04 and 4.56 N (CH). The CH had a pulling force directed towards the operator. Both instruments produced a similar range of downward forces although there was intra- and inter-operator variability. The rate of cut varied in a similar manner, however, the CH produced a significantly greater depth of cut (p < 0.05).

CONCLUSIONS

The force measurement system demonstrated differences in the way clinicians used the USC and CH instruments to cut bone. Of the two cutting methods investigated, the rotary bur is more efficient than the ultrasonic chisel. An ultrasonic chisel does cut bone in a different manner from a conventional bur and clinicians may require training before using it clinically.

Acoustic microstreaming: detection and measurement around ultrasonic scalers

BACKGROUND

Acoustic microstreaming (AMS) may be useful to the clinician when using the ultrasonic scaler to remove particulate matter from the teeth. The aim of this study was to detect and measure the effects of AMS produced by ultrasonic scalers.

METHODS

For the study, an ultrasonic generator was selected with 4 differently shaped scaling tip inserts (TFI-3, TFI-9, TFI-1, and P-12). A plaque substitute (0.2 mm thick soft cream cheese) was coated onto a microscope slide and immersed in water. The ultrasonic scaler tip was placed in the water and orientated either perpendicular or parallel to the slide. The instrument was operated both contacting the slide under a load of 0.3 N and non-contacting at various distances from the slide surface. This was repeated with the tip parallel to the slide. The area of medium removed was quantified by digital image analysis.

RESULTS

It was found that AMS removed the plaque substitute from around the tip. The TFI-9 insert significantly removed more material with increasing displacement amplitude (P <0.05). Significantly larger areas of plaque substitute were removed when the tips of the TFI-3, TFI-9, and P-12 inserts were orientated perpendicularly to the slide compared to the parallel orientation (P <0.05). Of the 4 inserts used, the TFI-9 insert removed the most material while the straight tip produced no apparent removal. Removal by AMS required the presence of a water medium and such forces were found to decrease with distance from the scaling tip. No plaque substitute removal was seen at a distance of 7 mm for the TFI-9 insert at 37.5 microm displacement with the tip orientation parallel to the slide.

CONCLUSIONS

It is concluded that AMS occurs around ultrasonic scalers and this depends on the displacement amplitude, tip orientation, and presence of a water medium. AMS may play a role in disruption of subgingival biofilms associated with periodontal disease.

An in vitro evaluation of electric toothbrushes

Four commercially available electric toothbrushes (Sonicare, Braun Electric Toothbrush, Interplak, and Blend-a-Dent) were assessed both for their operating characteristics and their ability to remove a "food debris" medium. The Sonicare and Blend-a-Dent have a lateral vibratory action, while the Interplak and Braun produce a rotary movement of the brush head. The vibratory action of the Sonicare was susceptible to loading. All devices produced both stable-pulsating cavitation and acoustic microstreaming that was demonstrated in vitro using a suspension of particles in water. Their effectiveness in removing a food debris medium was assessed with and without water. Three of the brushes (Sonicare, Braun, and Blend-a-Dent) were similar in their ability to remove the plaque, and all were superior to the Interplak; its streaming forces removed no food debris. The results indicated that the Blend-a-Dent was the most effective brush design in vitro, although the differences between Blend-a-Dent and Sonicare were not statistically significant.