A proof-of-principle for decontamination of transplantation kidney through UV-C exposition of the perfusate solution

Kidney transplantation is a common yet highly demanding medical procedure worldwide, enhancing the quality of life for patients with chronic kidney disease. Despite its prevalence, the procedure faces a shortage of available organs, partly due to contamination by microorganisms, leading to significant organ disposal. This study proposes utilizing photonic techniques associated with organ support machines to prevent patient contamination during kidney transplantation. We implemented a decontamination system using ultraviolet-C (UV-C) irradiation on the preservation solution circulating through pigs' kidneys between harvest and implant. UV-C irradiation, alone or combined with ultrasound (US) and Ps80 detergent during ex-vivo swine organ perfusion in a Lifeport® Kidney Transporter machine, aimed to reduce microbiological load in both fluid and organ. Results show rapid fluid decontamination compared to microorganism release from the organ, with notable retention. By including Ps80 detergent at 0.5% during UV-C irradiation 3 log10 (CFU mL-1) of Staphylococcus aureus bacteria previously retained in the organ were successfully removed, indicating the technique's feasibility and effectiveness.

Evaluation of Antimicrobial Photodynamic Therapy against Streptococcus mutans Biofilm in situ

AIM

This study investigated the effect of antimicrobial photo-dynamic therapy (aPDT) over Streptococcus mutans biofilm.

MATERIALS AND METHODS

Eighteen (n = 18) patients were selected and one palatine device with dental blocks was used. The biofilm was treated by curcumin and Photogem® with a LED and the effect was analyzed by CFU/ml.

RESULTS

Although, statistical analysis showed significant reductions for aPDT mainly with Photogem® (p = 0.02), these were low.

CONCLUSION

The results suggest a low antimicrobial effect of aPDT over S. mutans biofilm. Some parameters used need to be improved.

CLINICAL SIGNIFICANCE

This technique can be a promising in Dentistry.

Effects of low-level laser therapy on the proliferation and apoptosis of gingival fibroblasts treated with zoledronic acid

Low-level laser therapy (LLLT) has been indicated as an adjuvant therapy for bisphosphonate-induced osteonecrosis. However, the effects of LLLT on bisphosphonate-treated cells are not yet clear. This study evaluated the effects of LLLT on the proliferation and apoptosis of gingival fibroblasts treated with zoledronic acid (ZA). Cells were exposed to ZA at 5μM for 48h. Irradiation was performed using a laser diode prototype (LaserTABLE, InGaAsP; 780nm±3nm, 25mW) at 0.5 or 3J/cm(2), three times every 24h. Cell proliferation and apoptosis were evaluated by fluorescence microscopy. Data were analyzed by Mann-Whitney test at the 5% level of significance. ZA decreased cell proliferation to 47.62% (interquartile range (IQR) 23.80-57.14%; P=0.007) and increased apoptosis of gingival fibroblasts to 27.7% (IQR 20.9-33.4%; P=0.0001). LLLT increased cell proliferation compared with non-irradiated cells, at 0.5J/cm(2) (57.14%, IQR 57.14-71.43%; P=0.003) and at 3J/cm(2) (76.19%, IQR 61.90-76.19%; P=0.0001), but did not increase cell proliferation in ZA-treated cells. Irradiated fibroblasts presented lower apoptosis rates than the ZA-treated cells, but apoptosis was no different in ZA-treated cells compared to those that were ZA-treated and also irradiated.

Phototherapy during treadmill training improves quadriceps performance in postmenopausal women

OBJECTIVE

To evaluate the effects of infrared-light-emitting diode (LED) during treadmill training on functional performance.

METHODS

Thirty postmenopausal women aged 50-60 years were randomly assigned to one of three groups and successfully completed the full study. The three groups were: (1) the LED group, which performed treadmill training associated with phototherapy (n = 10); (2) the exercise group, which carried out treadmill training only (n = 10); and (3) the sedentary group, which neither performed physical training nor underwent phototherapy (n = 10). Training was performed over a period of 6 months, twice a week for 45 min per session at 85-90% of maximal heart rate, which was obtained during progressive exercise testing. The irradiation parameters were 100 mW, 39 mW/cm(2) and 108 J/cm(2) for 45 min. Quadriceps performance was measured during isokinetic exercise testing at 60°/s and 300°/s.

RESULTS

Peak torque did not differ amongst the groups. However, the results showed significantly higher values of power and total work for the LED group (∆ = 21 ± 6 W and ∆ = 634 ± 156 J, p < 0.05) when compared to both the exercise group (∆ = 13 ± 10 W and = 410 ± 270 J) and the sedentary group (∆ = 10 ± 9 W and ∆ = 357 ± 327 J). Fatigue was also significantly lower in the LED group (∆ = -7 ± 4%, p < 0.05) compared to both the exercise group (∆ = 3 ± 8%) and the sedentary group (∆ = -2 ± 6%).

CONCLUSIONS

Infrared-LED during treadmill training may improve quadriceps power and reduce peripheral fatigue in postmenopausal women.

Long-term follow-up of topical 5-aminolaevulinic acid photodynamic therapy diode laser single session for non-melanoma skin cancer

Photodynamic therapy (PDT) is based on the association of a light source and light sensitive agents in order to cause the selective death of tumor cells. To evaluate topical 5-aminolaevulinic acid (5-ALA) and diode laser photodynamic single session therapy single session for non-melanoma skin cancer (NMSC), a long-term follow-up was performed. Nineteen Bowen's disease (BD) and 15 basal cell carcinoma (BCC) lesions were submitted to 6-h topical and occlusive 20% 5-ALA plus DMSO and EDTA, and later were exposed to 630 nm diode laser, 100 or 300 J cm(-2) dose. At 3 months tumor-free rate was 91.2% (31/34) whereas at 60 months, 57.7% (15/26), slightly higher in BCC (63.6%; 7/11). The relation between the reduction of the clinical response and the increase of tumor dimension observed at 18 months was lost at 60 months. The sBCC recurrence was earlier compared to the nBCC one. ALA-PDT offered important advantages: it is minimally invasive, an option for patients under risk of surgical complications; clinical feasibility; treatment of multiple lesions in only one session or lesions in poor healing sites and superior esthetical results. However, the recurrence rate increase after ALA-PDT diode laser single session can be observed at long-term follow-up, and the repetitive sessions, an additional advantage of the method, is strongly recommended. The clinical response and recurrence time seem to be related to the laser light dose and NMSC types/sub-types, thickness and dimension, which must be considered for the choice of the ALA-PDT.

Renal ischemia in rats: mitochondria function and laser autofluorescence

Ischemia-reperfusion injury is the major cause of organ dysfunction or even nonfunction following transplantation. It can attenuate the long-term survival of transplanted organs. To evaluate the severity of renal ischemia injury determined by histology, we applied laser- (442 nm and 532 nm) induced fluorescence (LIF), mitochondria respiration, and membrane swelling to evaluate 28 Wistar rats that underwent left kidney warm ischemia for 20, 40, 60, or 80 minutes. LIF performed before ischemia (control) was repeated at 20, 40, 60, and 80 minutes thereafter. We harvested left kidney tissue samples immediately after LIF determination for histology and mitochondrial analyses: state 3 and 4 respiration, respiration control rate (RCR), and membrane swelling. The association of optic spectroscopy with histological damage showed: LIF, 442 nm (r2 = 0.39, P < .001) and 532 nm, (r2 = 0.18, P = .003); reflecting laser/fluorescence-induced, 442 nm (r2 = 0.20, P = .002) and 532 nm (r2 = 0.004, P = .67). The associations between mitochondria function and tissue damage were: state 3 respiration (r2 = 0.43, P = .0004), state 4 respiration (r2 = 0.03, P = 0.38), RCR (r2 = 0.28, P = .007), and membrane swelling (r2 = 0.02, P = .43). The intensity of fluorescence emitted by tissue excited by laser, especially at a wave length of 442 nm, was determined in real time. Mitochondrial state 3 respiration and respiratory control ratio also exhibited good correlations with the grade of ischemic tissue damage.

The use of light-emitting diodes to stimulate mitochondrial function and liver regeneration of partially hepatectomized rats

The biostimulating effect of laser radiation has been observed in many areas of Medicine. However, there are still several questions to be answered, among them the importance of light coherence in the stimulatory process. In the present study, we used light-emitting diodes (LED) to promote the stimulation of liver regeneration after partial hepatectomy in rats. Fourteen male Wistar rats weighing 200-250 g were submitted to partial hepatectomy (70%) followed by LED light irradiation (630 nm) of the remaining part of the liver at two doses, i.e., 10 (N = 7) and 140 (N = 7) J/cm(2). A group irradiated with laser, 590 nm (N = 7, 15 J/cm(2)) was performed for the study of proliferating cell nuclear antigen-labeling index. Data are reported as mean +/- SEM. Statistical comparisons of the groups were performed by analysis of variance for parametric measurements followed by the Bonferroni post-test, with the level of significance set at P < 0.05. Respiratory mitochondrial activity was increased in the irradiated groups (states 3 and 4; P < 0.05), with better results for the group exposed to the lower LED dose (10 J/cm(2)). The proliferating cell nuclear antigen-labeling index, by immunohistochemical staining, was similar for both LED-exposed groups (P > 0.05) and higher than for the control group (P < 0.05). The cell proliferation index obtained with LED and laser were similar (P > 0.05). In conclusion, the present results suggest that LED irradiation promotes biological stimulatory effects during the early stage of liver regeneration and that LED is as effective as laser light, independent of the coherence, divergence and cromaticity.

Comparison of Fluorescence Detection of Carious Dentin for Different Excitation Wavelengths

This study compared the fluorescence spectra obtained at three laser excitation wavelengths from intact enamel, sound dentin and carious dentin. Results were analyzed using a figure of merit (ratio of backscattered peak to maximum fluorescence amplitude). The results showed that the best excitation wavelengths for caries detection, which offered the greatest contrast between sound and carious tissue, were 442 and 632 nm. A discussion of the results between these two ends of the visible spectrum is provided. The results confirmed the choice of red light as a good excitation source for fluorescence detection of caries.

Pharmacokinetics of Photogem using fluorescence monitoring in Wistar rats

In this study we investigated the pharmacokinetics of a hematoporphyrin derivative (Photogem) in Wistar rats using the fluorescence spectroscopy to evaluate the drug distribution in liver, kidney and skin tissues. The detection system is composed of a 532 nm exciting laser, a Y-type catheter for light delivery and collection, a monochromator and a computer for data acquisition. The analysis of the fluorescence spectra was based on the intensity of porphyrin emission bands from specific tissues of the investigated organ. A simple transport model is proposed to determine the accumulation and elimination times for each type of investigated tissue. The obtained results show the viability of the fluorescence spectroscopic technique for the drug concentration monitoring in different target tissues and related pharmacokinetics. These effects should be considered before any in vivo study of Photodynamic Therapy using Photogem.

Spectral response for laser enhancement in hepatic regeneration for hepatectomized rats

BACKGROUND AND OBJECTIVES

The low intensity laser therapy (LILT) has been widely used in all medical fields due to its therapeutic effects in reparative process, pain relief, and biostimulation. Even though there is a therapeutic window of wavelengths for clinical application, little has been done concerning the frequency spectrum response to biological effects. In this work, we investigate the dependence of different wavelengths irradiation in the enhancement of the tissue regeneration after partial hepatectomy in Wistar rats.

STUDY DESIGN/MATERIALS AND METHODS

The proliferating cell nuclear antigen (PCNA) labeling index and the respiratory control (oxygen consumption in extracted mitochondria) were the tests used to evaluate the liver regeneration after laser irradiation with different wavelengths.

RESULTS AND CONCLUSIONS

The results show a correlated spectral response that can be explained based on the combined effect of light penetration on biological tissues and the biomolecular excitation efficiency for each wavelength used.

Hardness evaluation of a dental composite polymerized with experimental LED-based devices

OBJECTIVE

The main goal of this study was the hardness evaluation of a composite resin cured by five LED (Light Emitting Diodes) based devices and a comparison with a conventional curing unit. The hardness test was used to compare the efficacy of both types of light source.

METHODS

The LED-based devices were made employing an array of LEDs (Nichia Chem. Ind., Japan) emitting light peaked at 470nm. Composite resin (Z100, shade A3) was cured for 20, 40, 60, 120 and 180s with each LED-based device and for 40s with the halogen lamp. The composite samples were prepared with 0.35, 1.25 and 1.8mm of thickness. Five samples of each set of parameters were done. The hardness evaluation was performed at the non-illuminate surface with three indentations for each sample.

RESULTS

All the samples cured by the LED-based devices showed inferior hardness values when compared with the halogen lamp at the typical curing time (40s). The L6 (device composed of six LEDs) was the most efficient one of the LED-based devices. Its obtained irradiance was 79mW/cm(2), whereas the halogen lamp irradiance was of 475mW/cm(2). For the L6 device here presented, longer exposure times or a thinner resin layer are required to achieve reasonable hardness values.

SIGNIFICANCE

Besides the difference of irradiance when compared with halogen lamps, LED-based devices show to be a promising alternative curing instrument. Further development in instrumentation may result in devices even more efficient than conventional lamps.

A comparative study of nanosecond and picosecond laser ablation in enamel: morphological aspects

OBJECTIVE

We have investigated and compared the main morphological features of human enamel tissue under Nd:YAG nanosecond and picosecond laser ablation.

BACKGROUND DATA

The use of ultrashort laser pulses on teeth ablation is an alternative to avoid overheating and presents the advantage of minimizing the volume of damaged material during laser ablation. Comparison of the morphology obtained in laser ablation using nanosecond and picosecond laser pulses is a way to investigate the advantages of ultrashort laser pulses for ablation.

METHODS

Trains of pulses with picosecond duration from a Q-switched and mode-locked Nd:YAG laser and pulses with nanosecond duration from a Q-switched Nd:YAG laser, both operating at 15 Hz kept at the same average power, were focused in human sound molars for 30 sec. Drilled holes with different morphological characteristics were observed using several laser intensity regimes. Enamel surfaces were examined using a scanning electron microscope (SEM) and their morphological characteristics compared.

RESULTS

An interesting contrast between the morphology of the enamel when treated with different level of laser power and pulse duration was observed. Picosecond pulses promote a better-defined material removal with a minimum intermediate region, whereas nanosecond pulses at the equivalent average power level cause a large intermediate modified region between ablated and normal tissue, as well as a complete superficial modification of the existent original structure.

CONCLUSION

Our results show an important correlation between the surface morphology and the pulse width of the lasers, suggesting advantages toward the use of ultrashort laser pulses in dentistry.

Human teeth exposed to argon laser irradiation: determination of power-time-temperature working conditions

OBJECTIVE

This study was conducted to establish the operating parameters of the argon laser without thermal damage to the pulp tissue for clinical applications.

SUMMARY BACKGROUND DATA

Previous studies have mainly compared the temperature modifications of the pulp chamber in a very limited situation, where a complete view of the thermal history cannot be obtained nor even extrapolated to new applications.

METHODS

We used samples of molar and premolar tooth where a class V cavity was prepared and illuminated with an argon laser at different power levels, fixing the exposition area for all cases. Situations including open cavity and teeth restoration were analyzed. High-precision thermistors were placed in four different positions, one of which was inside the pulp chamber. The temperature evolution was monitored continuously by an interfaced computer during all laser exposure. Special attention was paid to the intrapulpal temperature variation because it is considered the most vulnerable thermal region. The temperature time evolution allowed the determination of the operating conditions (power-time-temperature variation) in which the use of the argon laser causes no pulpal damage. As a function of temperature variation, we divided the whole parameter space (power-time-temperature) into zones and the optimum zone of operation was determined.

CONCLUSIONS

We created a diagram called power-time-temperature (PTT) where zones of temperature increased under laser irradiation allow the verification of which condition is safe for clinical laser application. The results have a broad use when this type of analysis is applicable.

Characterization of enamel and dentin response to Nd:YAG picosecond laser ablation

OBJECTIVE

We investigated the main characteristics of human dental tissue under Nd:YAG picosecond laser ablation.

SUMMARY BACKGROUND DATA

The use of ultrashort laser pulses for teeth ablation prevents overheating and is an alternative for mechanical material removal; it also minimizes the volume of damaged material.

METHODS

Laser pulses of picosecond at 15 Hz repetition rates from a Q-switched and mode-locked Nd:YAG laser were focused on sound human molars for 30 seconds. Variation of light intensity in the pulse train allowed us to obtain drilled holes with different characteristics. Enamel and dentin surfaces were examined by optical and scanning electron microscope (SEM). The samples consisted of three sound human molars. The ablation rate was determined after taking an average of all samples.

RESULTS

Images from the SEM showed an interesting contrast between the morphology of the ablated enamel and dentin regions. In enamel, the ablated region appears to be more superficial than in dentin. The dentin fragility normally causes cracks that originate in the ablated region. The ablation rates in both enamel and dentin demonstrate a saturation behavior as the laser intensity increases. Furthermore, the ablation rate in dentin is about eight times greater than in enamel for the same laser fluence.

CONCLUSION

Our results show an important correlation between the surface morphology and the pulsed laser fluence, which is compatible to the ablation mechanisms presented when ultrashort laser pulses are used.