A biomechanical comparison of subscapularis repair techniques in total shoulder arthroplasty: lesser tuberosity osteotomy versus subscapularis peel

Background

The subscapularis peel (SP) and the lesser tuberosity osteotomy (LTO) are 2 common exposure techniques for total shoulder arthroplasty. Although some biomechanical studies have suggested a higher resistance to failure with the LTO, clinical studies have demonstrated no difference in repair failure or tendon healing. We hypothesized that there would be no difference in biomechanically tested repair strength between our SP technique and the previously tested LTO technique.

Methods

Eleven cadaver shoulders were separated into 2 groups: 6 SPs and 5 LTOs. After initial loading for 3000 cycles, the specimens were incrementally loaded to 450 ± 50 N or catastrophic failure. Repair gapping was measured after cyclical loading, and fatigue life was analyzed after incremental loading.

Results

There was no significant difference in mean repair gapping between the SP (2.40 ± 0.36 mm; mean ± standard deviation) and the LTO groups (3.10 ± 2.93 mm; P = .57). There was also no difference in the mean number of cycles to failure (6894 ± 956 vs. 6018 ± 1179; P = .14) and mean load to failure (400 ± 79 N vs. 340 ± 91 N; P = .21) between the SP and LTO techniques. However, there was more variability in bead gapping in the LTO group (P < .01).

Conclusion

No significant differences were found in repair gapping, fatigue failure, and load to failure in comparing the SP and LTO repairs. However, the SP repair demonstrated significantly less variability in repair gapping. These findings suggest that initial fixation biomechanical properties between the 2 constructs are similar in vitro.

Effect of Arthroscopic Stabilization on In Vivo Glenohumeral Joint Motion and Clinical Outcomes in Patients With Anterior Instability

BACKGROUND

Glenohumeral joint (GHJ) dislocations are common, and the resulting shoulder instability is often treated with arthroscopic stabilization. These procedures result in favorable clinical outcomes, but abnormal GHJ motion may persist, which may place patients at risk for developing osteoarthritis. However, the effects of shoulder instability and arthroscopic stabilization on GHJ motion are not well understood.

HYPOTHESIS

GHJ motion is significantly influenced by anterior instability and arthroscopic stabilization, but postsurgical measures of GHJ motion are not different from those of control subjects.

STUDY DESIGN

Controlled laboratory study.

METHODS

In vivo GHJ motion was measured by applying a computed tomographic model-based tracking technique to biplane radiographic images acquired during an apprehension test in healthy control subjects (n = 11) and anterior instability patients (n = 11). Patients were tested before surgery and at 6 months after surgery. Control subjects were tested once. Shoulder strength, active range of motion (ROM), and the Western Ontario Shoulder Instability (WOSI) index were also measured.

RESULTS

Before surgery, the humerus of the instability patients during the apprehension test was located significantly more anteriorly on the glenoid (7.9% of glenoid width; 2.1 mm) compared with that of the controls (P = .03), but arthroscopic stabilization moved this joint contact location posteriorly on the glenoid (4.7% of glenoid width; 1.1 mm; P = .03). After surgery, GHJ excursion during the apprehension test was significantly lower (14.7% of glenoid width; 3.6 mm) compared with presurgical values (19.4% of glenoid width; 4.7 mm; P = .01) and with that of the controls (22.4% of glenoid width; 5.7 mm; P = .01). The external and internal rotation strength of patients was significantly lower than that of the controls before surgery (P < .05), but differences in strength did not persist after surgery (P > .17). External rotation ROM in patients was significantly lower than that in control subjects both before and after arthroscopic stabilization (P < .01). The WOSI score improved significantly, from 48.3 ± 13.1 presurgery to 86.3 ± 16.5 after surgery (P = .0002).

CONCLUSION

In patients with anterior instability, arthroscopic stabilization significantly improves measures of strength, ROM, and clinical outcome. However, GHJ excursion is not fully restored to levels seen in the control subjects.

CLINICAL RELEVANCE

Although arthroscopic stabilization satisfactorily restores most clinical outcome measures, GHJ excursion and external rotation ROM remain compromised compared with healthy control subjects and may contribute to the development of osteoarthritis in patients with anterior instability.

Differences in glenohumeral joint morphology between patients with anterior shoulder instability and healthy, uninjured volunteers

BACKGROUND

Traumatic glenohumeral joint (GHJ) dislocations are common, resulting in significant shoulder disability and pain. Previous research indicates that bony morphology is associated with an increased risk of injury in other joints (eg, the knee), but the extent to which bony morphology is associated with traumatic GHJ dislocation is unknown. This study assessed GHJ morphology in patients with anterior GHJ instability and in a control population of healthy volunteers.

METHODS

Bilateral computed tomography scans were used to measure GHJ morphology in both shoulders of 11 patients with instability and 11 control subjects. Specific outcome measures included the glenoid radius of curvature (ROC) in the anterior/posterior (A/P) and superior/inferior (S/I) directions, humeral head ROC, A/P and S/I conformity index, and A/P and S/I stability angle.

RESULTS

Compared with the control subjects, the glenoid of the instability the injured shoulder in patients with instability was flatter (ie, higher ROC) in the A/P (P = .001) and S/I (P = .01) directions and this finding was also true for uninjured, contralateral shoulder (A/P: P = .01, S/I: P = .03). No differences in GHJ morphology were detected between the instability patients' injured and contralateral shoulders (P > .07). Similarly, no differences in GHJ morphology were detected between the control subjects' dominant and nondominant shoulders (P > .51).

CONCLUSIONS

There are significant differences in GHJ morphology between healthy control subjects and both shoulders (injured and uninjured, contralateral) of patients diagnosed with anterior instability after GHJ dislocation. These findings are important clinically because they suggest that glenoid morphology may influence the risk of GHJ dislocation.

Dynamic in-vivo assessment of navicular drop while running in barefoot, minimalist, and motion control footwear conditions

Running-related injuries are common and previous research has suggested that the magnitude and/or rate of pronation may contribute to the development of these injuries. Accurately and directly measuring pronation can be challenging, and therefore previous research has often relied on navicular drop (under both static and dynamic conditions) as an indirect assessment of pronation. The objectives of this study were to use dynamic, biplane X-ray imaging to assess the effects of three footwear conditions (barefoot, minimalist shoes, motion control shoes) on the magnitude and rate of navicular drop during running, and to determine the association between static and dynamic measures of navicular drop. Twelve healthy distance runners participated in this study. The magnitude and rate of navicular drop were determined by tracking the 3D position of the navicular from biplane radiographic images acquired at 60Hz during the stance phase of overground running. Static assessments of navicular drop and foot posture were also recorded in each subject. Footwear condition was not found to have a significant effect on the magnitude of navicular drop (p=0.22), but motion control shoes had a slower navicular drop rate than running barefoot (p=0.05) or in minimalist shoes (p=0.05). In an exploratory analysis, static assessments of navicular drop and foot posture were found to be poor predictors of dynamic navicular drop in all footwear conditions (p>0.18).

Exercise protocol induces muscle, tendon, and bone adaptations in the rat shoulder

BACKGROUND

a rat model of supraspinatus overuse has suggested mechanisms governing tendon degeneration; however, delineating which changes are pathologic or simply physiologic adaptations to increased loading remains a question. The objective of this study was to develop and characterize a rat exercise model that induces systemic and local shoulder adaptations without mechanical injury to the supraspinatus tendon.

METHODS

exercise rats completed a treadmill training protocol for 12 weeks. Body, fat pad, and heart weights were determined. Supraspinatus tendon collagen content, cross-sectional area, and mechanical properties were measured. Supraspinatus muscle cross-sectional area, weight, and the expression of mitochondrial oxidative phosphorylation (OXPHOS) proteins were measured. Humeri were analyzed with μCT and mechanically tested.

RESULTS

exercise decreased fat pad mass. Supraspinatus muscle hypertrophied and had increased OXPHOS proteins. Humerus trabecular bone had increased anisotropic orientation, and cortical bone showed increased bone and tissue mineral density. Importantly, the supraspinatus tendon did not have diminished mechanical properties, indicating that this protocol was not injurious to the tendon.

CONCLUSION

this study establishes the first rat exercise protocol that induces adaptations in the shoulder. Future research can use this as a comparison model to study how the supraspinatus tendon adapts to loading and undergoes degeneration with overuse.

Associations among shoulder strength, glenohumeral joint motion, and clinical outcome after rotator cuff repair

Rotator cuff tears are a common condition causing pain and disability, but the relationships among clinical measures of shoulder function and measures of glenohumeral joint (GHJ) function are not well known. In the study reported here, dynamic in vivo GHJ motion was measured during abduction from biplane radiographs in 22 rotator cuff repair (RCR) patients and 36 control subjects. Isometric shoulder strength was measured and clinical outcomes were assessed using the Western Ontario Rotator Cuff (WORC) Index. Associations among WORC, GHJ motion, and several shoulder strength ratios were assessed with linear regression. An association was detected between higher ER/ABD (external rotation/coronal-plane abduction) strength ratio and a humerus positioned more inferiorly relative to the glenoid in control subjects and RCR patients. Higher ER/ABD strength ratio was also associated with better clinical outcome in RCR patients. These findings suggest a relationship between ER/ABD strength ratio and a more centrally located average superior/inferior contact center in RCR patients and control subjects. The ER/ABD strength ratio can be easily measured in a clinical setting and therefore can be used in larger studies to investigate its relation to clinical outcomes over time or perhaps to predict superior migration of the humeral head.

In vivo shoulder function after surgical repair of a torn rotator cuff: glenohumeral joint mechanics, shoulder strength, clinical outcomes, and their interaction

BACKGROUND

Surgical repair of a torn rotator cuff is based on the belief that repairing the tear is necessary to restore normal glenohumeral joint (GHJ) mechanics and achieve a satisfactory clinical outcome.

HYPOTHESIS

Dynamic joint function is not completely restored by rotator cuff repair, thus compromising shoulder function and potentially leading to long-term disability.

STUDY DESIGN

Controlled laboratory study and Case series; Level of evidence, 4.

METHODS

Twenty-one rotator cuff patients and 35 control participants enrolled in the study. Biplane radiographic images were acquired bilaterally from each patient during coronal-plane abduction. Rotator cuff patients were tested at 3, 12, and 24 months after repair of a supraspinatus tendon tear. Control participants were tested once. Glenohumeral joint kinematics and joint contact patterns were accurately determined from the biplane radiographic images. Isometric shoulder strength and patient-reported outcomes were measured at each time point. Ultrasound imaging assessed rotator cuff integrity at 24 months after surgery.

RESULTS

Twenty of 21 rotator cuff repairs appeared intact at 24 months after surgery. The humerus of the patients' repaired shoulder was positioned more superiorly on the glenoid than both the patients' contralateral shoulder and the dominant shoulder of control participants. Patient-reported outcomes improved significantly over time. Shoulder strength also increased over time, although strength deficits persisted at 24 months for most patients. Changes over time in GHJ mechanics were not detected for either the rotator cuff patients' repaired or contralateral shoulders. Clinical outcome was associated with shoulder strength but not GHJ mechanics.

CONCLUSION

Surgical repair of an isolated supraspinatus tear may be sufficient to keep the torn rotator cuff intact and achieve satisfactory patient-reported outcomes, but GHJ mechanics and shoulder strength are not fully restored with current repair techniques.

CLINICAL RELEVANCE

The study suggests that current surgical repair techniques may be effective for reducing pain but have not yet been optimized for restoring long-term shoulder function.

Decreased loading after rotator cuff tears leads to improved biceps tendon properties in a rat model

BACKGROUND

The purpose of this study was to elucidate the mechanism of biceps tendon changes after rotator cuff tears. We hypothesized that increased loading on the biceps tendon after rotator cuff tears will result in further detrimental changes whereas decreased loading will result in increased organization and more normal tendon composition. In addition, we hypothesized that changes with altered loading will begin at the proximal insertion into bone and progress along the tendon length at later time points.

MATERIALS AND METHODS

Supraspinatus and infraspinatus tendon detachments in rats were followed by various loading protocols at various time points. Regional changes in cellularity, cell shape, collagen organization, and matrix proteins of the long head of the biceps tendon were determined by histologic measures and immunohistochemistry.

RESULTS

Increased loading after detachments resulted in more disorganized collagen after only 1 week and compositional changes by 4 weeks. By 8 weeks, decreased loading resulted in increased organization, decreased cellularity, a more elongated cell shape, and more normal tendon composition. Organizational changes with increased loading began in the intra-articular space and progressed along the tendon length with time.

CONCLUSIONS

Combined with previous findings of decreased mechanics with increased loading, these results show that increased compressive loading away from the proximal insertion into bone is a mechanism for biceps tendon pathology in the presence of rotator cuff tears. The striking improvements with decreased loading further support increased loading as a mechanism for biceps tendon pathology because removal of this load led to improvements in tendon histology, organization, and composition.

Biceps tendon properties worsen initially but improve over time following rotator cuff tears in a rat model

Damage to the biceps tendon is often seen in conjunction with rotator cuff tears. However, controversy exists regarding its role in the shoulder and its optimal treatment. A previous study determined that biceps tendons were detrimentally affected in the presence of rotator cuff tears in the rat model and this damage worsened over time. However, whether this damage progresses at later time points to provide a chronic model is unknown. The objective of this study was to determine the changes in the biceps tendon in the presence of a cuff tear over time. Our hypothesis was that histological, compositional, organizational, and mechanical properties would worsen with time. We detached the supraspinatus and infraspinatus tendons of 48 rats and evaluated these properties at 1, 4, 8, and 16 weeks postdetachment. Properties worsened through 8 weeks, but improved between 8 and 16 weeks. We therefore conclude that biceps tendon changes in this model are not truly chronic. Additionally, it has been shown that infraspinatus properties in this model return to normal by 16 weeks, when biceps properties improve, indicating that earlier repair of one or more of the rotator cuff tendons may lead to resolved pathology of the long head of the biceps tendon.

The effect of altered loading following rotator cuff tears in a rat model on the regional mechanical properties of the long head of the biceps tendon

Biceps tendon pathology is a common clinical problem often seen in conjunction with rotator cuff tears. A previous study found detrimental changes to biceps tendons in the presence of rotator cuff tears in a rat model. Therefore, the objective of this study was to utilize this model along with models of altered loading to investigate the effect of altered loading on the initiation of these detrimental changes. We created supraspinatus and infraspinatus rotator cuff tears in the rat and followed these tears with either increased or decreased loading. Mechanical properties were determined along the length of the biceps tendon 4 and 8 weeks following injury. At the insertion site, stiffness increased with decreased loading, while detrimental changes were seen with increased loading 4 weeks following detachments. Increased loading resulted in decreased mechanical properties along the entire tendon length at both time points. Decreased loading resulted in both increased and decreased tendon properties at different regions of the tendon at 4 weeks, but by 8 weeks, there were no differences between decreased loading and detachment alone. We could not conclude where changes begin in the tendon with altered loading, but did demonstrate that regional differences exist. These results support that there is an effect of altered loading, as decreased loading resulted in variable changes at 4 weeks that were no different from detachment alone by 8 weeks, and increased loading resulted in detrimental properties along the entire length at both 4 and 8 weeks.

Exercise following a short immobilization period is detrimental to tendon properties and joint mechanics in a rat rotator cuff injury model

Rotator cuff tears are a common clinical problem that can result in pain and disability. Previous studies in a rat model showed enhanced tendon to bone healing with postoperative immobilization. The objective of this study was to determine the effect of postimmobilization activity level on insertion site properties and joint mechanics in a rat model. Our hypothesis was that exercise following a short period of immobilization will cause detrimental changes in insertion site properties compared to cage activity following the same period of immobilization, but that passive shoulder mechanics will not be affected. We detached and repaired the supraspinatus tendon of 22 Sprague-Dawley rats, and the injured shoulder was immobilized postoperatively for 2 weeks. Following immobilization, rats were prescribed cage activity or exercise for 12 weeks. Passive shoulder mechanics were determined, and following euthanasia, tendon cross-sectional area and mechanical properties were measured. Exercise following immobilization resulted in significant decreases compared to cage activity in range of motion, tendon stiffness, modulus, percent relaxation, and several parameters from both a structurally based elastic model and a quasi-linear viscoelastic model. Therefore, we conclude that after a short period of immobilization, increased activity is detrimental to both tendon mechanical properties and shoulder joint mechanics, presumably due to increased scar production.

The effect of postoperative passive motion on rotator cuff healing in a rat model

BACKGROUND

Surgical repairs of torn rotator cuff tendons frequently fail. Immobilization has been shown to improve tissue mechanical properties in an animal model of rotator cuff repair, and passive motion has been shown to improve joint mechanics in animal models of flexor tendon repair. Our objective was to determine if daily passive motion would improve joint mechanics in comparison with continuous immobilization in a rat rotator cuff repair model. We hypothesized that daily passive motion would result in improved passive shoulder joint mechanics in comparison with continuous immobilization initially and that there would be no differences in passive joint mechanics or insertion site mechanical properties after four weeks of remobilization.

METHODS

A supraspinatus injury was created and was surgically repaired in sixty-five Sprague-Dawley rats. Rats were separated into three postoperative groups (continuous immobilization, passive motion protocol 1, and passive motion protocol 2) for two weeks before all underwent a remobilization protocol for four weeks. Serial measurements of passive shoulder mechanics (internal and external range of motion and joint stiffness) were made before surgery and at two and six weeks after surgery. After the animals were killed, collagen organization and mechanical properties of the tendon-to-bone insertion site were determined.

RESULTS

Total range of motion for both passive motion groups (49% and 45% of the pre-injury values) was less than that for the continuous immobilization group (59% of the pre-injury value) at two weeks and remained significantly less following four weeks of remobilization exercise. Joint stiffness at two weeks was increased for both passive motion groups in comparison with the continuous immobilization group. At both two and six weeks after repair, internal range of motion was significantly decreased whereas external range of motion was not. There were no differences between the groups in terms of collagen organization or mechanical properties.

CONCLUSIONS

In this model, immediate postoperative passive motion was found to be detrimental to passive shoulder mechanics. We speculate that passive motion results in increased scar formation in the subacromial space, thereby resulting in decreased range of motion and increased joint stiffness. Passive motion had no effect on collagen organization or tendon mechanical properties measured six weeks after surgery.

Mechanical properties of the long-head of the biceps tendon are altered in the presence of rotator cuff tears in a rat model

Rotator cuff tears are disabling conditions that result in changes in joint loading and functional deficiencies. Clinically, damage to the long-head of the biceps tendon has been found in conjunction with rotator cuff tears, and this damage is thought to increase with increasing tear size. Despite its importance, controversy exists regarding the optimal treatment for the biceps. An animal model of this condition would allow for controlled studies to investigate the etiology of this problem and potential treatment strategies. We created rotator cuff tears in the rat model by detaching single (supraspinatus) and multiple (supraspinatus + infraspinatus or supraspinatus + subscapularis) rotator cuff tendons and measured the mechanical properties along the length of the long-head of the biceps tendon 4 and 8 weeks following injury. Cross-sectional area of the biceps was increased in the presence of a single rotator cuff tendon tear (by approximately 150%), with a greater increase in the presence of a multiple rotator cuff tendon tear (by up to 220%). Modulus values decreased as much as 43 and 56% with one and two tendon tears, respectively. Also, multiple tendon tear conditions involving the infraspinatus in addition to the supraspinatus affected the biceps tendon more than those involving the subscapularis and supraspinatus. Finally, biceps tendon mechanical properties worsened over time in multiple rotator cuff tendon tears. Therefore, the rat model correlates well with clinical findings of biceps tendon pathology in the presence of rotator cuff tears, and can be used to evaluate etiology and treatment modalities.

After rotator cuff repair, stiffness--but not the loss in range of motion--increased transiently for immobilized shoulders in a rat model

Although rotator cuff repair is often successful at relieving pain, the repaired insertion site frequently fails. Mechanical properties of the repair improved when the shoulder was immobilized in an animal model, but joint stiffness and range of motion were not evaluated. The objective of this study was to measure rotational mechanics before and after shoulders were immobilized after cuff injury and repair, not immobilized after cuff injury and repair, and immobilized without injury and repair. Humeral rotation was significantly less 4 and 8 weeks after injury and repair but did not decrease significantly when the injured and repaired shoulder was immobilized. Rotational stiffness increased significantly 4 and 8 weeks after injury and repair and was significantly greater at 4, but not 8, weeks when the injured and repaired shoulders were immobilized. This study demonstrated that the increase in joint stiffness caused by immobilizing an injured and repaired shoulder was transient and, therefore, does not outweigh the long-term benefits of immobilization on improved tendon to bone healing.

Method for improved accuracy in endogenous urea recovery marker calibrations for microdialysis in tumors

INTRODUCTION

Urea has been proposed as an endogenous recovery marker for microdialysis for absolute concentration calculations of analytes in microdialysis samples. Previously we demonstrated a linear relationship between urea concentrations in a rat mammary carcinoma and that in plasma, validating its use as a recovery marker for that particular tumor. In this paper, we have extended the validation to two other tumor lines, thereby providing confidence that the calibration is constant across tumor types. To improve the accuracy in the determination of the plasma/tumor urea relationship from no net flux calibrations, we extended the range of the calibration by adding exogenous urea to tumor bearing animals. This method enabled more accurate calculations of absolute recovery from plasma and dialysate urea concentrations. We confirm that by using this method the calibration is valid across three different tumor lines. The existence of a common calibration between tumors provides rationale for using plasma urea as a recovery marker for clinical trials. The existence of a common calibration between tumor types bypasses the need to perform time consuming calibrations for each patient. This makes the procedure much more practical for clinical studies.

METHODS

The no net flux technique was used to determine the plasma vs. tumor urea relationship for the R3230Ac mammary carcinoma, 9 L glioma, and a fibrosarcoma (FSa), grown in Fischer 344 rats. Plasma urea was stably increased beyond the normally occurring concentration for some of the data points by subcutaneous bolus administration to extend the range of data for the no net flux calibration.

RESULTS

Urea recovery was unaffected by plasma urea concentration and was consistent with other reported values. The relationship between plasma and tumor urea was fit by a line, and linear regressions of the data with the extended plasma urea range had better R2 values than we reported previously. Statistical comparison of the regressions suggests that within reasonable uncertainty limits, they are the same for the different tumor types.

DISCUSSION

Increasing the plasma urea concentration range for no net flux calibrations of urea as an endogenous recovery marker in tumors resulted in more accurate determination of the plasma/tumor urea relationship. A single linear regression may describe the relationship between plasma and tumor urea concentration across tumor lines for a given set of microdialysis parameters.