Enhanced oil-water emulsion separation through coalescence filtration utilizing milkweed fiber: a sustainable paradigm

Over the past few years, the environment and public safety have suffered due to the detrimental effects of oily industrial effluents. Natural fibers have gained popularity for their affordability, reusability, and effectiveness in separating oil from oily wastewater. Milkweed fibers were characterized using FTIR (Fourier transform infrared spectroscopy), SEM (scanning electron microscopy), and contact angle techniques. With four porosities (0.90, 0.92, 0.95, and 0.98), deep bed coalescence filters were built at three different filter bed heights (10 mm, 20 mm, and 30 mm). Using milkweed coalescence filtering technology, a novel oil separation method is described along with a method to calculate oil film thickness following emulsified oily water saturation. By combining a bed height of 30 mm and a porosity of 0.98, a maximum oil separation of 99.73% and an optimized D50 droplet ratio were achieved. Throughout a prolonged operational period lasting 250 min, the filter bed, possessing a depth of 30 mm and a porosity of 98%, exhibited no discernible fouling indications. Following five cycles, the milkweed filter bed measuring 30 mm in depth and featuring a porosity of 98% displayed an impressive oil separation efficiency of 91.5%. This study found that using a milkweed deep bed filter, coalescence filtering effectively removes oil from oily effluent. Furthermore, milkweed is a natural and biodegradable fiber that is easy to dispose of after use and does not harm the environment.

Oil separation from oil in water emulsion by coalescence filtration using kapok fibre

In this study, the stable emulsion of engine oil in water of concentration 10% was prepared using a non-ionic surfactant. Kapok fibres were used as filter beds to separate oil from the oil-water emulsion. The surface morphology of fibres was investigated using Scanning Electron Microscope (SEM) analysis and chemical bond analysis of fibres done using Fourier transform infrared (FTIR). Kapok filter beds were prepared with three different bed heights 10, 20 and 30 mm each with four different porosities 0.90, 0.92, 0.95 and 0.98 for preparing the coalescence filter. The oil-water emulsion (influent) was pumped into the filtration column and the coalesced oil droplets, water, as well as un-coalesced oil droplets, especially the finer oil droplets, were collected as effluent. Oil separation efficiency was evaluated in terms of change in droplet size (D50) and oil concentration from influent to effluent. With increasing porosity and bed height, apart from porosity of 0.92, the separation efficiency increases. Increasing the bed heights at lower porosities does not improve the efficiency of the process. A combination of 0.98 porosity and a bed height of 30 mm provided the highest filtration performance in terms of oil separation efficiency and D50 droplet ratio. At 0.98 porosity, increasing the bed height from 10 mm to 30 mm resulted in a D50 droplet ratio of 0.25-0.14, representing a significant decrease in droplet size in the effluent and therefore an increase in oil separation efficiency from 91.3% to 99.63%.

Extracellular protease expression in Microsporum gypseum complex, its regulation and keratinolytic potential

Two soil isolates of Microsporum gypseum were studied for the production of extracellular proteases. Both the strains secreted protease on glucose-gelatin medium. The enzyme activity peaked on day 15 at 28 °C. Asparagine repressed protease yield. Sugars caused catabolite repression of protease formation. Protease activities of both the isolates were significantly affected by incubation period, culture media and carbohydrates used. Both the strains grew on the skin bait and caused a gravimetrically measurable loss of the substrate. Despite less pronounced differences in the keratinase levels, great variations occurred in the amount of keratin degraded by two isolates. Keratinase production as well as loss in substrate mass was better in glucose-lacking flasks than those containing the sugar. Although the rate of keratin degradation was independent of enzyme production, statistically positive correlations were recorded between loss in substrate mass: yielded dry mycelial weight and substrate degradation: keratinase levels.

Optimization of an extracellular protease of Chrysosporium keratinophilum and its potential in bioremediation of keratinic wastes

Chrysosporium keratinophilum IMI 338142 isolated from a waste site containing organopollutants was studied for its ability to produce extracellular proteases on glucose-gelatin medium. Fungus was observed to be a potent producer of such enzymes. Enzyme secretion was best at 15 days of incubation period at pH 8 and temperature 40 degrees C. Asparagine was repressive to protease expression. No relationship existed between the enzyme yield and increase in biomass. Exogenous sugars suppressed enzyme production in the descending order as follows: glucose > arabinose > maltose > mannose > fructose. The enzyme released showed the ability to decompose two keratin substrates tested. Buffalo skin was the most actively degraded substrate when exogenous glucose was absent. Presence of glucose suppressed both enzyme production and degradation of keratin. However, the rate of keratin degradation was independent of enzyme production.

Exocellular proteases of Malbranchea gypsea and their role in keratin deterioration

Malbranchea gypsea IMI 338,168 isolated from the soils of Keoladeo National Park, Bharatpur was studied for its ability to produce exocellular proteases on glucose-gelatin medium at pH 7; 28 degrees C. The fungus was observed to be a potent producer of such enzymes. Protease production was optimal at 15 days of incubation. Asparagine was repressive to protease expression. No relationship existed between the amount of enzyme production and increase in biomass. Exogenous sugars suppressed enzyme production in descending order as follows: glucose > mannose > maltose > arabinose > fructose. The enzymes expressed showed the ability to degrade three keratinous substrates tested. Buffalo skin was the most actively degraded substrate when exogenous glucose was present, and was also the most resistant to degradation in the absence of glucose. The rate of keratin deterioration was independent of enzyme activity. Production of protease enzymes especially keratinases is ecologically important in a place like a National Park because such enzymes degrade keratinous detritus derived from mammals and birds. Accumulation of such materials can be a cause of pollution and can provide a breeding spot for various types of pathogens.

Characterization of an extracellular keratinase of Trichophyton simii and its role in keratin degradation

The ability of Trichophyton simii HN 50, isolated from the Ghana Bird Sanctuary, Bharatpur, India, to produce extracellular keratinase was studied. Enzyme was produced on a keratin salt broth medium at pH7 and a temperature of 28 +/- 1 degree C. Enzyme secretion was best at 15 days of incubation. Asparagine and keratin were repressive to enzyme yield in comparison to gelatin. No relationship was observed between enzyme release and biomass sugars suppressed keratinase production in descending order as follows: glucose > mannose > maltose > arabinose > fructose. The enzyme showed ability to degrade all of the 3 keratin substrates. Buffalo skin was best degraded in the absence of glucose while chicken feathers were the least degraded in its presence.

Antimycotic effects of some antibiotics on the growth of some dermatophytes and other keratin degrading fungi

Four antibiotics have been tested against the growth of some dermatophytes and keratin degrading fungi. A gradual decrease in growth was observed with increase in concentration of all antibiotics. All, but griseofulvin observed to inhibit > 50% mycelial weight even at a lower concentration of 50 ppm. Azole derivatives were most toxic to the growth of M. gypseum at all concentrations, whereas, to that of C. tropicum at above 100 ppm. Mycostatin was the most toxic antibiotic to the growth of M. gypsea at all concentrations.