Advancing in Cesium Retention: Application of Magnesium Phosphate Cement Composites

A serious risk that harms the safe use of water and affects aquatic ecosystems is water pollution. This occurs when the water's natural equilibrium is disrupted by an excessive amount of substances, both naturally occurring and as a byproduct of human activities, that have varied degrees of toxicity. Radiation from Cs isotopes, which are common components of radioactive waste and are known for their long half-lives (30 years), which are longer than the natural decay processes, is a major source of contamination. Adsorption is a commonly used technique for reducing this kind of contamination, and zeolite chabazite has been chosen as the best adsorbent for cesium in this particular situation. The purpose of this research is to investigate a composite material based on magnesium phosphate cement (MPC). Magnesium oxide (MgO), potassium dihydrogen phosphate (KH2PO4), and properly selected retarders are used to create the MPC. The optimal conditions for this composite material are investigated through the utilization of X-ray diffraction, scanning electron microscopy, BET surface area analysis, and atomic absorption spectroscopy. The principal aim is to enable innovations in the elimination of radioactive waste-contaminated water using effective cesium removal. The most promising results were obtained by using KH2PO4 as an acid, and MgO as a base, and aiming for an M/P ratio of two or four. Furthermore, we chose zeolite chabazite as a crucial component. The best adsorption abilities for Cs were found at Qads = 106.997 mg/g for S2 and Qads = 122.108 mg/g for S1. As a result, zeolite is an eco-friendly material that is a potential usage option, with many benefits, such as low prices, stability, and ease of regeneration and use.

Upscale Synthesis of Magnetic Mesoporous Silica Nanoparticles and Application to Metal Ion Separation: Nanosafety Evaluation

The synthesis of core-shell magnetic mesoporous nanoparticles (MMSNs) through a phase transfer process is usually performed at the 100-250 mg scale. At the gram scale, nanoparticles without cores or with multicore systems are observed. Iron oxide core nanoparticles (IO) were synthesized through a thermal decomposition procedure of α-FeO(OH) in oleic acid. A phase transfer from chloroform to water was then performed in order to wrap the IO nanoparticles with a mesoporous silica shell through the sol-gel procedure. MMSNs were then functionalized with DTPA (diethylenetriaminepentacetic acid) and used for the separation of metal ions. Their toxicity was evaluated. The phase transfer procedure was crucial to obtaining MMSNs on a large scale. Three synthesis parameters were rigorously controlled: temperature, time and glassware. The homogeneous dispersion of MMSNs on the gram scale was successfully obtained. After functionalization with DTPA, the MMSN-DTPAs were shown to have a strong affinity for Ni ions. Furthermore, toxicity was evaluated in cells, zebrafish and seahorse cell metabolic assays, and the nanoparticles were found to be nontoxic. We developed a method of preparing MMSNs at the gram scale. After functionalization with DTPA, the nanoparticles were efficient in metal ion removal and separation; furthermore, no toxicity was noticed up to 125 µg mL-1 in zebrafish.

Study of Modified Magnesium Phosphate Cement for Fluoride Removal

In this study, we used a novel composite material based on magnesium phosphate cement (MPC) to explore the retention of fluoride from used water. Dead-burned magnesium oxide (MgO), ammonium dihydrogen phosphate (NH4H2PO4), and a few retarders were used to create this particular substance. Several studies have corroborated the performance of using aluminum in the capture of fluoride. From this perspective, we attempted to reinforce our matrix with different quantities of aluminum, which increased the resistance of the composite in water. The optimal conditions that were obtained were evaluated and scrutinized using a range of techniques, including scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transforms infrared spectroscopy (FTIR), and Brunauer-Emmett-Teller (BET). The adsorbents demonstrated a powerful ability to remove fluoride from contaminated water and the defluoridation capacity was evaluated at 4.84 mg/g. Equilibrium modeling was carried out, and the experimental data were expressed in accordance with the Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich isotherms.

Dendritic Mesoporous Organosilica Nanoparticles with Photosensitizers for Cell Imaging, siRNA Delivery and Protein Loading

Dendritic mesoporous organosilica nanoparticles (DMON) are a new class of biodegradable nanoparticles suitable for biomolecule delivery. We studied the photochemical internalization (PCI) and photodynamic therapy (PDT) of DMON to investigate new ways for DMON to escape from the endosomes-lysosomes and deliver biomolecules into the cytoplasm of cells. We added photosensitizers in the framework of DMON and found that DMON were loaded with siRNA or FVIII factor protein. We made four formulations with four different photosensitizers. The photosensitizers allowed us to perform imaging of DMON in cancer cells, but the presence of the tetrasulfide bond in the framework of DMON quenched the formation of singlet oxygen. Fortunately, one formulation allowed us to efficiently deliver proapoptotic siRNA in MCF-7 cancer cells leading to 31% of cancer cell death, without irradiation. As for FVIII protein, it was loaded in two formulations with drug-loading capacities (DLC) up to 25%. In conclusion, DMON are versatile nanoparticles capable of loading siRNA and delivering it into cancer cells, and also loading FVIII protein with good DLC. Due to the presence of tetrasulfide, it was not possible to perform PDT or PCI.

Aggregation of magnetic nanoparticles functionalized with trans-resveratrol in aqueous solution

In the framework of a protein-ligand-fishing strategy to identify proteins that bind to trans-resveratrol, a natural phenolic compound with pharmacological benefits, we have developed magnetic nanoparticles covalently linked to trans-resveratrol through three different derivatives and examined their aggregation behavior in aqueous solution. The monodispersed magnetic core (18 nm diameter) with its mesoporous silica shell (93 nm diameter) exhibited a notable superparamagnetic behavior useful for magnetic bioseparation. The hydrodynamic diameter, deduced from dynamic light scattering analysis, of the nanoparticle increased from 100 to 800 nm when the aqueous buffer changed from pH 10.0-3.0. A size polydispersion occurred from pH 7.0-3.0. In parallel, the value of the extinction cross section increased according to a negative power law of the UV wavelength. This was mainly due to light scattering by mesoporous silica, whereas the absorbance cross section remained very low in the 230-400 nm domain. The three types of resveratrol-grafted magnetic nanoparticles exhibited similar scattering properties, but their absorbance spectrum was consistent with the presence of trans-resveratrol. Their functionalization increased their negative zeta potential when pH increased from 3.0 to 10.0. The mesoporous nanoparticles were monodispersed in alkaline conditions, where their anionic surface strongly repulsed each other but aggregated progressively under van der Waals forces and hydrogen bonding when negative zeta potential decreased. The characterized results of nanoparticle behavior in aqueous solution provide critical insight for further study of nanoparticles with proteins in biological environment.

Antioxidant Efficacy and "In Vivo" Safety of a Bentonite/Vitamin C Hybrid

L-ascorbic acid (LAA), commonly known as vitamin C, is an excellent and recognized antioxidant molecule used in pharmaceutical and cosmetic formulations. Several strategies have been developed in order to preserve its chemical stability, connected with its antioxidant power, but there is little research regarding the employment of natural clays as LAA host. A safe bentonite (Bent)-which was verified by in vivo ophthalmic irritability and acute dermal toxicity assays-was used as carrier of LAA. The supramolecular complex between LAA and clay may constitute an excellent alternative, since the molecule integrity does not seem to be affected, at least from the point of view of its antioxidant capacity. The Bent/LAA hybrid was prepared and characterized through ultraviolet (UV) spectroscopy, X-ray diffraction (XRD), infrared (IR) spectroscopy, thermogravimetric analysis (TG/DTG) and zeta potential measurements. Photostability and antioxidant capacity tests were also performed. The LAA incorporation into Bent clay was demonstrated, as well as the drug stability due to the Bent photoprotective effect onto the LAA molecule. Moreover, the antioxidant capacity of the drug in the Bent/LAA composite was confirmed.

Synthesis and Characterization of New Composite Materials Based on Magnesium Phosphate Cement for Fluoride Retention

In this research work, new composite materials based on magnesium phosphate cement (MPC) were developed to evaluate the retention of fluorine from wastewater. This material was prepared with dead burned magnesia oxide (MgO), ammonium dihydrogen phosphate (NH₄H₂PO₄), and some retarding agents. We chose to synthesize with hydrogen peroxide instead of water; alumina and zeolite were also added to the cement. The obtained optimal conditions were studied and analyzed by X-ray diffraction (XRD) and scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), BET, and thermogravimetric analysis (TGA). The adsorbents showed a strong ability to remove fluoride from contaminated water, and the best defluoridation capacity was evaluated as 2.21 mg/g for the H₂O₂ cement. Equilibrium modeling was performed, and the experimental data were presented according to the isotherms of Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich.

Zirconium-Based Metal Organic Frameworks for the Capture of Carbon Dioxide and Ethanol Vapour. A Comparative Study

This paper reports on the comparison of three zirconium-based metal organic frameworks (MOFs) for the capture of carbon dioxide and ethanol vapour at ambient conditions. In terms of efficiency, two parameters were evaluated by experimental and modeling means, namely the nature of the ligands and the size of the cavities. We demonstrated that amongst three Zr-based MOFs, MIP-202 has the highest affinity for CO2 (-50 kJ·mol-1 at low coverage against around -20 kJ·mol-1 for MOF-801 and Muc Zr MOF), which could be related to the presence of amino functions borne by its aspartic acid ligands as well as the presence of extra-framework anions. On the other side, regardless of the ligand size, these three materials were able to adsorb similar amounts of carbon dioxide at 1 atm (between 2 and 2.5 µmol·m-2 at 298 K). These experimental findings were consistent with modeling studies, despite chemisorption effects, which could not be taken into consideration by classical Monte Carlo simulations. Ethanol adsorption confirmed these results, higher enthalpies being found at low coverage for the three materials because of stronger van der Waals interactions. Two distinct sorption processes were proposed in the case of MIP-202 to explain the shape of the enthalpic profiles.

Synthesis of triethoxysilylated cyclen derivatives, grafting on magnetic mesoporous silica nanoparticles and application to metal ion adsorption

The synthesis through click chemistry of triethoxysilylated cyclen derivative-based ligands is described. Different methods were used such as the copper catalyzed Huisgen's reaction, or thiol–ene reaction for the functionalization of the cyclen scaffold with azidopropyltriethoxysilane or mercaptopropyltriethoxysilane, respectively. These ligands were then grafted on magnetic mesoporous silica nanoparticles (MMSN) for extraction and separation of Ni(ii) and Co(ii) metal ions from model solutions. The bare and ligand-modified MMSN materials revealed high adsorption capacity (1.0–2.13 mmol g⁻¹) and quick adsorption kinetics, achieving over 80% of the total capacity in 1–2 hours.

The adsorption of metal ions through ligand-functionalized magnetic mesoporous silica nanoparticles is described.

Nanodiamonds for bioapplications, recent developments

The world of biomedical research is in constant evolution, requiring more and more conditions and norms through pre-clinic and clinic studies. Nanodiamonds (NDs) with exceptional optical, thermal and mechanical properties emerged on the global scientific scene and recently gained more attention in biomedicine and bioanalysis fields. Many problematics have been deliberated to better understand their in vitro and in vivo efficiency and compatibility. Light was shed on their synthesis, modification and purification steps, as well as particle size and surface properties in order to find the most suitable operating conditions. In this review, we present the latest advances of NDs use in bioapplications. A large variety of subjects including anticancer and antimicrobial systems, wound healing and tissue engineering management tools, but also bioimaging and labeling probes are tackled. The key information resulting from these recent works were evidenced to make an overview of the potential features of NDs, with a special look on emerging therapeutic and diagnosis combinations.

Preparation and Characterization of Novel Mixed Periodic Mesoporous Organosilica Nanoparticles

We report herein the preparation of mixed periodic mesoporous organosilica nanoparticles (E-Pn 75/25 and 90/10 PMO NPs) by sol-gel co-condensation of E-1,2-bis(triethoxysilyl)ethylene ((E)-BTSE or E) with previously synthesized disilylated tert-butyl 3,5-dialkoxybenzoates bearing either sulfide (precursor P1) or carbamate (precursor P2) functionalities in the linker. The syntheses were performed with cetyltrimethylammonium bromide (CTAB) as template in the presence of sodium hydroxide in water at 80 °C. The nanomaterials have been characterized by Transmission Electron Microscopy (TEM), nitrogen-sorption measurements (BET), Dynamic Light Scattering (DLS), zeta-potential, Thermogravimetric Analysis (TGA), FTIR, 13C CP MAS NMR and small angle X-ray diffraction (p-XRD). All the nanomaterials were obtained as mesoporous rodlike-shape nanoparticles. Remarkably, E-Pn 90/10 PMO NPs presented high specific surface areas ranging from 700 to 970 m2g-1, comparable or even higher than pure E PMO nanorods. Moreover, XRD analyses showed an organized porosity for E-P1 90/10 PMO NPs typical for a hexagonal 2D symmetry. The other materials showed a worm-like mesoporosity.

Periodic Mesoporous Organosilica Nanoparticles with BOC Group, towards HIFU Responsive Agents

Periodic Mesoporous Organosilica Nanoparticles (PMONPs) are nanoparticles of high interest for nanomedicine applications. These nanoparticles are not composed of silica (SiO2). They belong to hybrid organic-inorganic systems. We considered using these nanoparticles for CO2 release as a contrast agent for High Intensity Focused Ultrasounds (HIFU). Three molecules (P1-P3) possessing two to four triethoxysilyl groups were synthesized through click chemistry. These molecules possess a tert-butoxycarbonyl (BOC) group whose cleavage in water at 90-100 °C releases CO2. Bis(triethoxysilyl)ethylene E was mixed with the molecules Pn (or not for P3) at a proportion of 90/10 to 75/25, and the polymerization triggered by the sol-gel procedure led to PMONPs. PMONPs were characterized by different techniques, and nanorods of 200-300 nm were obtained. These nanorods were porous at a proportion of 90/10, but non-porous at 75/25. Alternatively, molecules P3 alone led to mesoporous nanoparticles of 100 nm diameter. The BOC group was stable, but it was cleaved at pH 1 in boiling water. Molecules possessing a BOC group were successfully used for the preparation of nanoparticles for CO2 release. The BOC group was stable and we did not observe release of CO2 under HIFU at lysosomal pH of 5.5. The pH needed to be adjusted to 1 in boiling water to cleave the BOC group. Nevertheless, the concept is interesting for HIFU theranostic agents.

The mannose 6-phosphate receptor targeted with porphyrin-based periodic mesoporous organosilica nanoparticles for rhabdomyosarcoma theranostics

Periodic mesoporous organosilica nanoparticles targeted to the mannose 6-phosphate receptor for rhabdomyosarcoma photodynamic therapy using a pulsed laser.

Encapsulation of Upconversion Nanoparticles in Periodic Mesoporous Organosilicas

(1) Background: Nanomedicine has recently emerged as a promising field, particularly for cancer theranostics. In this context, nanoparticles designed for imaging and therapeutic applications are of interest. We, therefore, studied the encapsulation of upconverting nanoparticles in mesoporous organosilica nanoparticles. Indeed, mesoporous organosilica nanoparticles have been shown to be very efficient for drug delivery, and upconverting nanoparticles are interesting for near-infrared and X-ray computed tomography imaging, depending on the matrix used. (2) Methods: Two different upconverting-based nanoparticles were synthesized with Yb3+-Er3+ as the upconverting system and NaYF4 or BaLuF5 as the matrix. The encapsulation of these nanoparticles was studied through the sol-gel procedure with bis(triethoxysilyl)ethylene and bis(triethoxysilyl)ethane in the presence of CTAB. (3) Results: with bis(triethoxysilyl)ethylene, BaLuF5: Yb3+-Er3+, nanoparticles were not encapsulated, but anchored on the surface of the obtained mesoporous nanorods BaLuF5: Yb3+-Er3+@Ethylene. With bis(triethoxysilyl)ethane, BaLuF5: Yb3+-Er3+ and NaYF4: Yb3+-Er3+nanoparticles were encapsulated in the mesoporous cubic structure leading to BaLuF5: Yb3+-Er3+@Ethane and NaYF4: Yb3+-Er3+@Ethane, respectively. (4) Conclusions: upconversion nanoparticles were located on the surface of mesoporous nanorods obtained by hydrolysis polycondensation of bis(triethoxysilyl)ethylene, whereas encapsulation occurred with bis(triethoxysilyl)ethane. The later nanoparticles NaYF4: Yb3+-Er3+@Ethane or BaLuF5: Yb3+-Er3+@Ethane were promising for applications with cancer cell imaging or X-ray-computed tomography respectively.

Microwave-assisted hydrothermal synthesis of manganate nanoflowers for selective retention of strontium

An alternative microwave-assisted hydrothermal route for the preparation of manganate nanoflowers under basic conditions has been proposed in view of potential uses in selective retention of strontium from multicomponent aqueous streams. Based on the combination of such characterization techniques as Scanning and Transmission Electronic Microscopy, X-ray photoelectron spectroscopy, and X-ray Diffraction, as well as taking advantage of the computer-aided structure simulation, homogeneous nanoflower morphology possessing a layered structure and K⁺ compensating cations was evidenced as corresponding to the KMn₄O₈ chemical formula. The nanoflower sample was subsequently tested for the selective adsorption of strontium and cesium by measuring the individual adsorption isotherms from single-solute and multicomponent aqueous solutions. The material appeared selective towards strontium against cesium even in multicomponent solutions provided that the concentration of calcium remained low. This difference in the retention selectivity was rationalized based on the Density Functional Theory (DFT) calculations of the energy of adsorption and direct calorimetry measurements of the enthalpy of displacement for the individual cations.

Large Pore Mesoporous Silica and Organosilica Nanoparticles for Pepstatin A Delivery in Breast Cancer Cells

(1) Background: Nanomedicine has recently emerged as a new area of research, particularly to fight cancer. In this field, we were interested in the vectorization of pepstatin A, a peptide which does not cross cell membranes, but which is a potent inhibitor of cathepsin D, an aspartic protease particularly overexpressed in breast cancer. (2) Methods: We studied two kinds of nanoparticles. For pepstatin A delivery, mesoporous silica nanoparticles with large pores (LPMSNs) and hollow organosilica nanoparticles (HOSNPs) obtained through the sol⁻gel procedure were used. The nanoparticles were loaded with pepstatin A, and then the nanoparticles were incubated with cancer cells. (3) Results: LPMSNs were monodisperse with 100 nm diameter. HOSNPs were more polydisperse with diameters below 100 nm. Good loading capacities were obtained for both types of nanoparticles. The nanoparticles were endocytosed in cancer cells, and HOSNPs led to the best results for cancer cell killing. (4) Conclusions: Mesoporous silica-based nanoparticles with large pores or cavities are promising for nanomedicine applications with peptides.

From enabling technologies to medicinal mechanochemistry: an eco-friendly access to hydantoin-based active pharmaceutical ingredients

The sustainable preparation of hydantoin-based Active Pharmaceutical Ingredients (APIs) using modern non-conventional activation methods, including mechanochemistry is herein described.

Phthalocyanine-based mesoporous organosilica nanoparticles: NIR photodynamic efficiency and siRNA photochemical internalization

Mesoporous organosilica nanoparticles (PHT-PMO) have been prepared from an octa-triethoxysilylated Zn phthalocyanine precursor and showed powerful NIR photodynamic efficiency and siRNA photochemical internalization.

Biosafety of Mesoporous Silica Nanoparticles

Careful analysis of any new nanomedicine device or disposal should be undertaken to comprehensively characterize the new product before application, so that any unintended side effect is minimized. Because of the increasing number of nanotechnology-based drugs, we can anticipate that regulatory authorities might adapt the approval process for nanomedicine products due to safety concerns, e.g., request a more rigorous testing of the potential toxicity of nanoparticles (NPs). Currently, the use of mesoporous silica nanoparticles (MSN) as drug delivery systems is challenged by a lack of data on the toxicological profile of coated or non-coated MSN. In this context, we have carried out an extensive study documenting the influence of different functionalized MSN on the cellular internalization and in vivo behaviour. In this article, a synthesis of these works is reviewed and the perspectives are drawn. The use of magnetic MSN (Fe3O4@MSN) allows an efficient separation of coated NPs from cell cultures with a simple magnet, leading to results regarding corona formation without experimental bias. Our interest is focused on the mechanism of interaction with model membranes, the adsorption of proteins in biological fluids, the quantification of uptake, and the effect of such NPs on the transcriptomic profile of hepatic cells that are known to be readily concerned by NPs' uptake in vivo, especially in the case of an intravenous injection.

Recent developments in nanostructured inorganic materials for sorption of cesium and strontium: Synthesis and shaping, sorption capacity, mechanisms, and selectivity-A review

Liquid wastes containing non-ferrous heavy metal ions and some radionuclides, ¹³⁷Cs and ⁹⁰Sr in particular, represent one of the most dangerous sources of environmental contamination. The remediation of wastewater containing such pollutants continue to be among the biggest challenges of Sustainable Development and Environmental Safety. Sorption-based technologies have proven their efficiency also in reducing the radionuclide content in aqueous streams to low-level residual activity, with the concomitant decrease in the amount of ultimate solid waste generated. Although sorption of cesium and strontium by resins, clays, and zeolites has been investigated intensively and even used in real applications, there is still considerable scope for improvement in terms of retention capacity and selectivity. Recent progress in design and preparation of nanostructured inorganic materials has attracted growing interest based on the potential for improving the retention performance when coupling such functionalities as ion exchange capacity, structural flexibility that may result in steric retention effects, as well as the propensity to interact specifically with the target metal cations. Titanate, vanadate, and tungsten based materials, manganese oxides, hexacyanoferrates, metal sulfides, ammonium molybdophosphates, or hydroxyapatite, characterized by various structures and morphologies, are reviewed with the emphasis being put on synthesis and shaping of such materials, their structure in relationship with the capacity and selectivity of trapping cesium and strontium from either single or multi-component aqueous solutions, as well as the possible retention mechanism. The potential candidates for remediation uses are selected with regard to their sorption capacity and distribution coefficient towards target cations, and also the pH window for an optimum cation capture.

Porphyrin- or phthalocyanine-bridged silsesquioxane nanoparticles for two-photon photodynamic therapy or photoacoustic imaging

Porphyrin- or phthalocyanine-bridged silsesquioxane nanoparticles (BSPOR and BSPHT) were prepared. Their endocytosis in MCF-7 cancer cells was shown with two-photon excited fluorescence (TPEF) imaging. With two-photon excited photodynamic therapy (TPE-PDT), BSPOR was more phototoxic than BSPHT, which in contrast displayed a very high signal for photoacoustic imaging in mice.

Biocompatibility assessment of functionalized magnetic mesoporous silica nanoparticles in human HepaRG cells

Magnetic mesoporous silica nanoparticles (M-MSNs) are a promising class of nanoparticles for drug delivery. However, a deep understanding of the toxicological mechanisms of action of these nanocarriers is essential, especially in the liver. The potential toxicity on HepaRG cells of pristine, pegylated (PEG), and lipid (DMPC) M-MSNs were compared. Based on MTT assay and real-time cell impedance, none of these NPs presented an extensive toxicity on hepatic cells. However, we observed by transmission electron microscopy (TEM) that the DMPC and pristine M-MSNs were greatly internalized. In comparison, PEG M-MSNs showed a slower cellular uptake. Whole gene expression profiling revealed the M-MSNs molecular modes of action in a time- and dose-dependent manner. The lowest dose tested (1.6 µg/cm²) induced no molecular effect and was defined as 'No Observed Transcriptional Effect level.' The dose 16 µg/cm² revealed nascent but transient effects. At the highest dose (80 µg/cm²), adverse effects have clearly arisen and increased over time. The limit of biocompatibility for HepaRG cells could be set at 16 µg/cm² for these NPs. Thanks to a comparative pathway-driven analysis, we highlighted the sequence of events that leads to the disruption of hepatobiliary system, elicited by the three types of M-MSNs, at the highest dose. The Adverse Outcome Pathway of hepatic cholestasis was implicated. Toxicogenomics applied to cell cultures is an effective tool to characterize and compare the modes of action of many substances. We propose this strategy as an asset for upstream selection of the safest nanocarriers in the framework of regulation for nanobiosafety.

Biocompatible Periodic Mesoporous Ionosilica Nanoparticles with Ammonium Walls: Application to Drug Delivery

Periodic mesoporous ionosilica nanoparticles with ammonium walls were synthesized exclusively from a trisilylated ammonium precursor. The nanoparticles display a uniform particle size, together with a high specific surface area and an ordered hexagonal pore architecture. Completely biocompatible in vitro and in vivo, the nanoparticles are efficiently endocytosed by RAW 264.7 macrophages and used as carrier vehicles for anionic drugs. Diclofenac-loaded ionosilica nanoparticles are very efficient in inhibiting lipopolysaccharides-induced inflammation.

The species origin of the serum in the culture medium influences the in vitro toxicity of silica nanoparticles to HepG2 cells

The formation of a protein corona around nanoparticles can influence their toxicity, triggering cellular responses that may be totally different from those elicited by pristine nanoparticles. The main objective of this study was to investigate whether the species origin of the serum proteins forming the corona influences the in vitro toxicity assessment of silica nanoparticles. Coronas were preformed around nanoparticles before cell exposures by incubation in fetal bovine (FBS) or human (HS) serum. The compositions of these protein coronas were assessed by nano-LC MS/MS. The effects of these protein-coated nanoparticles on HepG2 cells were monitored using real-time cell impedance technology. The nanoparticle coronas formed in human or fetal bovine serum comprised many homologous proteins. Using human compared with fetal bovine serum, nanoparticle toxicity in HepG2 cells decreased by 4-fold and 1.5-fold, when used at 50 and 10μg/mL, respectively. It is likely that "markers of self" are present in the serum and are recognized by human cell receptors. Preforming a corona with human serum seems to be more appropriate for in vitro toxicity testing of potential nanocarriers using human cells. In vitro cytotoxicity assays must reflect in vivo conditions as closely as possible to provide solid and useful results.

Biological Fate of Fe₃O₄ Core-Shell Mesoporous Silica Nanoparticles Depending on Particle Surface Chemistry

The biological fate of nanoparticles (NPs) for biomedical applications is highly dependent of their size and charge, their aggregation state and their surface chemistry. The chemical composition of the NPs surface influences their stability in biological fluids, their interaction with proteins, and their attraction to the cell membranes. In this work, core-shell magnetic mesoporous silica nanoparticles (Fe₃O₄@MSN), that are considered as potential theranostic candidates, are coated with polyethylene glycol (PEG) or 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) lipid bilayer. Their biological fate is studied in comparison to the native NPs. The physicochemical properties of these three types of NPs and their suspension behavior in different media are investigated. The attraction to a membrane model is also evaluated using a supported lipid bilayer. The surface composition of NPs strongly influences their dispersion in biological fluids mimics, protein binding and their interaction with cell membrane. While none of these types of NPs is found to be toxic on mice four days after intravenous injection of a dose of 40 mg kg-1 of NPs, their surface coating nature influences the in vivo biodistribution. Importantly, NP coated with DMPC exhibit a strong accumulation in liver and a very low accumulation in lung in comparison with nude or PEG ones.

Experimental separation steps influence the protein content of corona around mesoporous silica nanoparticles

In order to direct nanocarriers to their targets efficiently, we have to understand the interactions occurring at the nano-bio interface between nanocarriers and human proteins, which forms the layer called the corona. However, experiments aiming to identify and quantify the proteins in the corona, especially critical steps in the separation of nanoparticles from biological media may affect the corona composition. Here, we used nano-LC MS/MS to compare the protein corona contents obtained after using two different separation methods. We showed that applying centrifugation versus magnetization to isolate nanoparticles surrounded by a corona resulted in protein loss and a reshuffling of their respective abundances.

The timeline of corona formation around silica nanocarriers highlights the role of the protein interactome

Magnetic mesoporous silica nanoparticles (M-MSNs) represent promising targeting tools for theranostics. Engineering the interaction of nanoparticles (NPs) with biological systems requires an understanding of protein corona formation around the nanoparticles as this drives the biological fate of nanocarriers. We investigated the behavior of proteins in contact with M-MSNs by high-throughput comparative proteomics, using human and bovine sera as biological fluids, in order to assess the adsorption dynamics of proteins in these media. Using system biology tools, and especially protein-protein interaction databases, we demonstrated how the protein network builds up within the corona over the course of the experiment. Based on these results, we introduce and discuss the role of the "corona interactome" as an important factor influencing protein corona evolution. The concept of the "corona interactome" is an original methodology which could be generalized to all NP candidates. Based on this, pre-coating nanocarriers with specific proteins presenting minimal interactions with opsonins might provide them with properties such as stealth.

Accordion-shaped10B nanostructures by sonication-assisted direct oxidation pathway for neutron sensors

Boron nanomaterials prepared by direct oxidation of a Li_xB alloy display unusual morphology and good efficiency in neutron detection.

Functionalized Mesoporous Silica Nanoparticle with Antioxidants as a New Carrier That Generates Lower Oxidative Stress Impact on Cells

Mesoporous silica nanoparticles (MSNs) were covalently coated with antioxidant molecules, namely, caffeic acid (MSN-CAF) or rutin (MSN-RUT), in order to diminish the impact of oxidative stress induced after transfection into cells, thus generating safer carriers used for either drug delivery or other applications. Two cellular models involved in the entry of NPs in the body were used for this purpose: the intestinal Caco-2 and the epidermal HaCaT cell lines. Rutin gave the best results in terms of antioxidant capacities preservation during coupling procedures, cellular toxicity alleviation, and decrease of ROS level after 24 h incubation of cells with grafted nanoparticles. These protective effects of rutin were found more pronounced in HaCaT than in Caco-2 cells, indicating some cellular specificity toward defense against oxidative stress. In order to gain more insight about the Nrf2 response, a stable transfected HaCaT cell line bearing repeats of the antioxidant response element (ARE) in front of a luciferase reporter gene was generated. In this cell line, both tBHQ and quercetin (Nrf2 agonists), but not rutin, were able to induce, in a dose-dependent fashion, the luciferase response. Interestingly, at high concentration, MSN-RUT was able to induce a strong Nrf2 protective response in HaCaT cells, accompanied by a comparable induction of HO-1 mRNA. The level of these responses was again less important in Caco-2 cells. To conclude, in keratinocyte cell line, the coupling of rutin to silica nanoparticles was beneficial in term of ROS reduction, cellular viability, and protective effects mediated through the activation of the Nrf2 antioxidant pathway.

Synthesis, decoration, and cellular effects of magnetic mesoporous silica nanoparticles

Synthesis of magnetic core@shell nanoparticles with different coatings and the study of their uptake by cells.

One-pot construction of multipodal hybrid periodic mesoporous organosilica nanoparticles with crystal-like architectures

The design of hybrid multipodal PMO (mp-PMO) nanoparticles with crystal-like architectures elaborated in a one-pot, two-step process, involving the preparation of a benzene-based spherical PMO core followed by the formation of ethylene-based rod-shaped PMO pods on these cores is described.

Influence of the synthetic method on the properties of two-photon-sensitive mesoporous silica nanoparticles

The two-photon properties of MSN were studied as a function of the synthetiic method.

Microwave-ultrasound simultaneous irradiation: a hybrid technology applied to ring closing metathesis

Glycerol micelles were suitable nanoreactors for ring-closing metathesis reaction activated by a hybrid microwave-ultrasound reactor. Nine different Ru-catalysts were investigated.

Improved gene transfer with histidine-functionalized mesoporous silica nanoparticles

Mesoporous silica nanoparticles (MSN) were functionalized with aminopropyltriethoxysilane (MSN-NH2) then L-histidine (MSN-His) for pDNA delivery in cells and in vivo. The complexation of pDNA with MSN-NH2 and MSN-His was first studied with gel shift assay. pDNA complexed with MSN-His was better protected from DNase degradation than with MSN-NH2. An improvement of the transfection efficiency in cells was observed with MSN-His/pDNA compared to MSN-NH2/pDNA, which could be explained by a better internalization of MSN-His. The improvement of the transfection efficiency with MSN-His was also observed for gene transfer in Achilles tendons in vivo.

Versatile heavy metals removal via magnetic mesoporous nanocontainers

Versatile heavy metal ions removal is performed via iron oxide core mesoporous silica shell nanocontainers functionalized with diethylene triamine pentaacetic acid.

Poly(ethylene glycol)-based ionic liquids: properties and uses as alternative solvents in organic synthesis and catalysis

PEG-based ionic liquids are a new appealing group of solvents making the link between two distinct but very similar fluids: ionic liquids and poly(ethylene glycol)s. They find applications across a range of innumerable disciplines in science, technology, and engineering. In the last years, the possibility to use these as alternative solvents for organic synthesis and catalysis has been increasingly explored. This Review highlights strategies for their synthesis, their physical properties (critical point, glass transition temperature, density, rheological properties), and their application in reactions catalyzed by metals (such as Pd, Cu, W, or Rh) or as organic solvent (for example for multicomponent reactions, organocatalysis, CO2 transformation) with special emphasis on their toxicity, environmental impact, and biodegradability. These aspects, very often neglected, need to be considered in addition to the green criteria usually considered to establish ecofriendly processes.

Synthesis of novel multi-cationic PEG-based ionic liquids

The syntheses of ten novel mono-, di- or tri-cationic poly(ethylene glycol)-based ionic liquids (IL_PEGs), incorporating tetra-substituted ammonium cations, are described.

Two-photon-triggered drug delivery in cancer cells using nanoimpellers

A therapy of cancer cells: Two-photon-triggered camptothecin delivery with nanoimpellers was studied in MCF-7 breast cancer cells. A fluorophore with a high two-photon absorption cross-section was first incorporated in the nanoimpellers. Fluorescence resonance energy transfer (FRET) from the fluorophore to the azobenzene moiety was demonstrated.

In vitro lipid peroxidation of intestinal bile salt-based nanoemulsions: potential role of antioxidants

Over the last decades, oxidative stress has been described as a deleterious phenomenon contributing to numerous noncommunicable diseases such as cardiovascular disease, diabetes, and cancers. As many authors ascribed the healthy effect of fruit and vegetable consumption mainly to their antioxidant contents, it has been hypothesized that their protection could occur from the gut. Therefore, the aim of this study was to develop an original and physiological model of nanoemulsions to study lipid peroxidation within the intestine and to assess the properties of potential antioxidants in this setting. Several nanoemulsions were compared in terms of physical characteristics and reactivity to 2,2'-azobis-(2-amidinopropane) hydrochloride (AAPH)-induced oxidation. Formulations included different types of lipids, a detergent (a conjugated bile salt or sodium dodecyl sulfate) and, finally, lipophilic antioxidants. Hemin and myoglobin were also tested as relevant potential oxidants. Fatty acid (FA) peroxidation was monitored by gas chromatography while malondialdehyde and antioxidant contents were measured by HPLC. Investigated nanoemulsions were composed of spherical or cylindrical mixed micelles, the latter being the least resistant to oxidation. In the experimental conditions, AAPH was the only efficient oxidant. Alpha-tocopherol and lutein significantly slowed FA degradation from 4 to 1 μM, respectively. On the contrary, beta-carotene did not show any protective capacity at 4 μM. In conclusion, the tested nanoemulsions were appropriate to assess antioxidant capacity during the intestinal phase of digestion.

One step synthesis of gold-loaded radial mesoporous silica nanospheres and supported lipid bilayer functionalization: towards bio-multifunctional sensors

A simple synthetic route is developed to achieve gold functionalized radial mesoporous silica nanoparticles (Au-MsNP) synthesized by a one step procedure fully compatible with basic conditions required for the preparation of monodispersed nanospheres. In a second step, Au-MsNP particles have been coated with phospholipid bilayers in order to design an advanced biofunctional platform with the gold metallic nanoparticles previously grown into the pore channels and responsible for a plasmonic activity relevant for biosensing. The size of Au-MsNP is checked by dynamic light scattering while zeta potential measurements reflect their surface charge. The particle morphology is characterized by transmission and scanning electron microscopy and the Si/Au ratios are obtained from energy dispersive X-ray analysis. The textural properties of Au-MsNP, specific surface area and pore size, are determined from N(2) adsorption. The supported bilayers are achieved from vesicles of different phospholipids incubated with Au-MsNP particles. The coating efficiency is investigated by zeta potential and cryo- transmission electron microscopy. The plasmonic activities of bare Au-MsNP particles and coated lipid bilayer Au-MsNP platform are evidenced for two model systems: direct adsorption of bovine serum albumin and molecular recognition events between avidin molecules and biotin receptors integrated in the supported lipid bilayer.