Real-Time Ozone Sensor Based on Selective Oxidation of Methylene Blue in Mesoporous Silica Films

Sensitive and selective personal exposure monitors are needed to assess ozone (O₃) concentrations in the workplace atmosphere in real time for the analysis and prevention of health risks. Here, a cumulative gas sensor using visible spectroscopy for real-time O₃ determination is described. The sensing chip is a mesoporous silica thin film deposited on transparent glass and impregnated with methylene blue (MB). The sensor is reproducible, stable for at least 50 days, sensitive to 10 ppb O₃ (one-tenth of the occupational exposure limit value in France, Swiss, Canada, U.K., Japan, and the USA) with a measurement range tested up to 500 ppb, and insensitive to NO₂ and to large variation in relative humidity. A model and its derivative as a function of time are proposed to convert in real time the sensor response to concentrations, and an excellent correlation was obtained between those data and reference O₃ concentrations. This sensor is based on a relatively cheap sensing material and a robust detection system, and its analytical performance makes it suitable for monitoring real-time O₃ concentrations in workplaces to promote a safer environment for workers.

Magnetoelastic Effects in Doubly Clamped Electroplated Co77Fe23 Microbeam Resonators

Magnetostrictive Co77Fe23 films are fully suspended to produce free-standing, clamped-clamped, microbeam resonators. A negative or positive shift in the resonant frequency is observed for magnetic fields applied parallel or perpendicular to the length of the beam, respectively, confirming the magnetoelastic nature of the shift. Notably, the resonance shifts linearly with higher-bias fields oriented perpendicular to the beam's length. Domain imaging elucidates the distinction in the reversal processes along the easy and hard axes. Together, these results suggest that through modification of the magnetic anisotropy, the frequency shift and angular dependence can be tuned, producing highly magnetic-field-sensitive resonators.

Sampling and Analysis of Bitumen Fumes: Comparison of German and French Methods to Determine a Conversion Formula

Bitumen is classed as possibly carcinogenic to humans according to the International Agency for Research on Cancer. Data on individual exposure to bitumen fumes is therefore required to highlight the exposing situations and develop methods to prevent them. The Institute for Occupational Safety and Health of the German Social Accident Insurance (IFA) and the French National Research and Safety Institute for the Prevention of Occupational Accidents and Diseases (INRS) have both developed methods to measure individual exposure. The objective of this study was to determine a conversion factor to allow interconversion of data acquired by the two methods. To develop this conversion factor, comparative laboratory and workplace tests were performed according to both the IFA method (No. 6305) and the INRS method (MetroPol M-2). The amounts of organic material collected on the filters and XAD-2 beds were compared. The results revealed differences between the sampling and analytical methods that could be linked to sampler design, extraction solvent, and the detection method used. The total quantification returned by the two methods-the sum of the masses quantified on filter and XAD-2 bed for each sampler-were correlated in both controlled and real-life tests. A conversion equation was therefore determined, based on field tests: CIFA = 1.76 CINRS ± 0.39 (R2 = 0.99) that is applicable to total quantification data. This formula can be applied to data acquired by the two institutes to increase the number of data points available on exposure to bitumen fumes in various conditions, and thus increase the statistical power of studies into occupational prevention.

Alternatives for Benzene in the Extraction of Bitumen Fume from Exposure Sample Media

Benzene is frequently used to extract collected bitumen fumes from personal sampler substrates. However, this solvent is particularly dangerous because of its carcinogenicity (group 1 of the International Agency for Research on Cancer classification). Therefore, to prevent the exposure of laboratory technicians to benzene during the fume extraction step from samplers, a compromise had to be found to identify a less toxic solvent with the same extraction capacity. To compare the extraction capacities of selected solvents, bitumen fumes were generated in the laboratory from three different batches of road surfacing bitumen collected on dedicated bitumen fume samplers. The samplers were then extracted by benzene and the solvents tested. Of 11 selected solvents less toxic than benzene and used in studies on bitumen and bitumen fume analyses, n-hexane and n-heptane were identified as alternatives to benzene. In particular, the results demonstrated that n-heptane was the best candidate solvent for benzene replacement, due to its extraction efficiency comparable to benzene for the three bitumen fumes tested and its low toxicity, which is highly compatible with benzene replacement.

Scanning capacitance microscopy registration of buried atomic-precision donor devices

We show that a scanning capacitance microscope (SCM) can image buried delta-doped donor nanostructures fabricated in Si via a recently developed atomic-precision scanning tunneling microscopy (STM) lithography technique. A critical challenge in completing atomic-precision nanoelectronic devices is to accurately align mesoscopic metal contacts to the STM defined nanostructures. Utilizing the SCMs ability to image buried dopant nanostructures, we have developed a technique by which we are able to position metal electrodes on the surface to form contacts to underlying STM fabricated donor nanostructures with a measured accuracy of 300 nm. Low temperature (T = 4 K) transport measurements confirm successful placement of the contacts to the donor nanostructures.

Developing a new simplified method to determine diffusive uptake rates of volatile organic compounds in workplaces based on a fractional factorial designs approach

Exposure to organic vapors in the workplace is a source of occupational risk. Admissible exposure levels are tightly regulated and must be closely monitored. However, the complexity and slowness of the existing complete protocols to determine diffusive uptake rates through passive sampling have limited the use of this tool despite obvious advantages. In this study, we experimentally validate two simplified protocols to determine diffusive uptake rates with passive sampling. The proposed 2(6-3) and 2(6-2) fractional factorial designs were validated for toluene sampling using a (Gas Adsorbent Badge for Individual Exposure) GABIE-activated charcoal sampler in a controlled atmosphere. The uptake rate for this sampler had been determined previously using a full protocol. The uptake rates for all three protocols were similar, indicating that the proposed new designs can be substituted for classical full protocols. After validation of our protocols, uptake rates for new substances used as fuel additives (methyl and ethyl tert-butyl ethers, MTBE and ETBE) were determined on the same sampler using the 2(6-2) design. In these experiments, temperature appears to have a non-negligible influence on the uptake rates measured for these compounds. With some precautions of usage (ambient temperature below a determined limit temperature or at least exposure time ≥4 h) and storage (storage temperature = 4°C) of the sampler, the experimental diffusive uptake rates determined by this method can be used with good confidence. Field experiments confirmed the experimental results, showing good agreement between active and passive sampling using the experimentally determined uptake rates.

The association between demolition activity and children's blood lead levels

Urban renewal efforts are a priority for many American cities. As efforts to reconstitute urban centers increase, the demolition of old, deteriorated structures has accelerated. Recent studies have identified demolitions as a potential source of environmental lead exposure. We conducted a study examining the relationship between demolition activity and blood lead levels of children residing in neighborhoods where demolition activity occurred. A retrospective cohort study was conducted in St. Louis City, Missouri. The study period was January 1, 2002 to December 31, 2002. Data were obtained from the Missouri Childhood Lead Poisoning Prevention Program's (CLPPP) lead surveillance system and St. Louis Demolition Permit Database. Children were considered exposed to a demolition if they had a blood lead test within 45 days of any demolition on a census block. Exposure was classified as both a dichotomous (yes/no) and a categorical (none/one/multiple) variable and was analyzed separately. Linear regression models were developed to determine effects of demolitions on blood lead levels. A total of 1196 children 6-72 months of age living in 395 census blocks were included. 314 (26.3%) were exposed and 882 (73.7%) were unexposed to a demolition. In an adjusted model, exposure to multiple demolitions was found to have significant effects on children blood lead levels (coefficient=0.281; 95% CI=0.069, 0.493; P-value=0.010). Age of the child, race, and age of housing where children's resided were also significant predictors. This study suggests that multiple demolitions within a census block may significantly increase children's blood lead levels. The findings may be useful to municipal planners in older cities where demolitions are being used as an urban renewal tool.

Prise en charge des hématomes post-traumatiques isolés de la surrénale

We report three cases of isolated adrenal haematoma diagnosed at admission to the Emergency Department. Post-traumatic adrenal haematoma have been observed in 2% of patients with abdominal injury and can be life threatening in cases of bilateral haemorrhage with risk of acute adrenocortical insufficiency. Diagnosis remains difficult due to absence of clinical and biological specific parameters. Therefore, abdominal CT examination should be the gold standard in management of abdominal trauma patients.

[Prevention of cardiovascular diseases by an antihypertensive program in the elderly, a cohort study]

INTRODUCTION

We started on year 2000 a Complex Intervention Program addressed at hypertension control among our patients.

AIM

To compare the risk of cardiovascular events and of dying in hypertensive patients under Program care.

METHOD

We started follow-up of a cohort of 1922 patients over 65 years in August 2000. Hipertension diagnosis was ascertained if patient reported to be hypertensive, or was under anti hypertensive treatment or if he/she had two blood pressure measurements = 140/90 mm Hg. Cardiovascular events were considered to be admissions due to coronary disease, cardiac insufficiency or stroke. Incidence is reported by 100 person years follow-up. Relative risks between hypertensive and normotensive patients were calculated and Cox regresión was used to adjust for potential confounders. We compared time to first cardiovascular event and to death with Log Rank Test.

RESULTS

Fourty eight point three percent of patients were hypertensive and differed from normotensive patients as to age (79 (5) years vs. 77 (5) p < 0.001), proportion of diabetic patients (16.1% vs. 7.6% p < 0.001). Mean follow-up time was 28 months. Mortality RR was 1.04 (95% CI 0.69-1.58). As to incidence of cardiovascular events it was 1.86 in normotensive vs. 3.02 (RR 1.62 95% CI 1.09-2.42). When adjusted by age, sex, smoking, dislipemia and diabetes, OR was 1.3 (95% CI 0.86-1.98).

CONCLUSIONS

Hypertension did not increase the risk in cardiovascular events among our hypertensive patients at 2.3 years follow-up.