Acromioclavicular Joint Lesions in Adolescents-A Systematic Review and Treatment Guidelines

True acromioclavicular joint (ACJ) injuries are rare in children and adolescents due to the strength of ligaments in this age group. However, a standardized management guideline for these injuries is currently lacking in the literature. This systematic review aims to provide an organized overview of associated injuries and propose a management algorithm for pediatric ACJ injuries. Using the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines, a systematic review was conducted. Two independent observers searched PubMed, Cochrane Central Register of Controlled Trials (CENTRAL), and Scopus databases for ACJ injuries in children and adolescents. The extracted data were analyzed (due to the limited number of publications and inhomogeneity of data, no formal statistical analysis was conducted), and cases were categorized based on injury frequency and pattern, leading to the formulation of a treatment algorithm. The risk of bias was assessed using the Joanna Briggs Institute (JBI) critical appraisal checklist. A total of 77 articles were identified, and 16 articles (4 case series and 12 case reports) met the inclusion criteria. This study included 37 cases in 36 patients (32 males, 4 females) with a mean age of 13 years (9-17 years). Six injury categories were described. Surgical management was performed in 27 ACJ injuries (25 open, 2 arthroscopic). Various surgical implants were used including K wires, polydioxanone sutures (PDS), screws, hook plates, suture anchors, and suture button devices. Most cases achieved good to excellent outcomes, except for one case of voluntary atraumatic dislocation of the ACJ. This systematic review provides the first comprehensive analysis of ACJ injury management in adolescents with open physis. It categorizes injury patterns and presents a treatment algorithm to enhance the understanding of these injuries. The review's findings contribute valuable insights for clinicians dealing with pediatric ACJ injuries.

Instabilities and Osteoarthritis of the Sternoclavicular Joint

Injury to the sternoclavicular joint (SCG) is very rare, accounting for 3% of shoulder injuries and < 1% of instabilities. Consequently, both the treatment of acute instabilities and their subsequent states (chronic instabilities/SCG arthrosis) are controversial. While treatment has so far been mostly conservative, in recent years there has been a trend towards surgical therapy.Considerable violence, such as that found in traffic accidents or contact sports, can tear the extremely stable ligaments between the medial clavicle and sternum. While anterior dislocation is easier to reduce in most cases, instability remains in up to 50% of cases. In most cases, posterior instability requires rapid reduction, particularly due to the anatomical proximity to important cardio-pulmonary structures. If this succeeds, the rate of persistent instabilities is low. For chronic instability, reconstruction/augmentation of the ligament apparatus with tendon grafts in the "Figure of 8 configuration" has proven to be the standard technique in recent years.

Iatrogenic instability of the acromioclavicular joint leads to ongoing impairment of shoulder function even following secondary surgical stabilization

PURPOSE

Iatrogenic instability of the acromioclavicular joint (ACJ) following distal clavicle excision (DCE) represents an infrequent pathology. Revision surgery to restore ACJ stability and alleviate concomitant pain is challenging due to altered anatomic relationships. The purpose of this study was to evaluate the used salvage techniques and postoperative functional and radiological outcomes in retrospectively identify patients with a painful ACJ following DCE. We hypothesized that iatrogenic instability leads to ongoing impairment of shoulder function despite secondary surgical stabilization.

METHODS

9 patients with a painful ACJ after DCE (6 men, 3 women, 43.3 ± 9.4 years) were followed up at a minimum of 36 months after revision surgery. Besides range of motion (ROM), strength and function were evaluated with validated evaluation tools including the Constant score and the DASH score (Disability of the Arm, Shoulder and Hand questionnaire), specific AC Score (SACS), Nottingham Clavicle Score (NCS), Taft score and Acromioclavicular Joint Instability Score (AJI). Additionally, postoperative X-rays were compared to the unaffected side, measuring the coracoclavicular (CC) and acromioclavicular (AC) distance.

RESULTS

At follow-up survey (55.8 ± 18.8 months) all patients but one demonstrated clinical ACJ stability after arthroscopically assisted anatomical ACJ reconstruction with an autologous hamstring graft. Reconstruction techniques were dependent on the direction of instability. The functional results demonstrated moderate shoulder and ACJ scores with a Constant Score of 77.3 ± 15.4, DASH-score of 51.2 ± 23.4, SACS 32.6 ± 23.8, NCS 77.8 ± 14.2, AJI 75 ± 14.7 points and Taft Score 7.6 ± 3.4 points. All patients stated they would undergo the revision surgery again. Mean postoperative CC-distance (8.3 ± 2.8 mm) did not differ significantly from the contralateral side (8.5 ± 1.6 mm) (p > 0,05). However, the mean AC distance was significantly greater with 16.5 ± 5.8 mm compared to the contralateral side (3.5 ± 1.9 mm) (p = 0.012).

CONCLUSION

Symptomatic iatrogenic ACJ instability following DCE is rare. Arthroscopically assisted revision surgery with an autologous hamstring graft improved ACJ stability in eight out of nine cases (88.9%). However, the functional scores showed ongoing impairment of shoulder function and a relatively high overall complication rate (33.3%). Therefore, this study underlines the importance of precise preoperative indication and planning and, especially, the preservation of ACJ stability when performing AC joint resection procedures.

LEVEL OF EVIDENCE

Case series, LEVEL IV.

[Injuries of the shoulder in winter sports]

Skiing as a sport has come a long way from the first competitive event in Norway in 1767 to about 200 million skiers today worldwide. With Germany alone recording around 8000 injuries annually, there is an increased need for awareness for winter-sport-related injuries and their management. According to the latest report by "Auswertungsstelle für Skiunfälle" (ASU, evaluation center for ski accidents), shoulder injuries alone account for more than 20% of injuries to all body regions (men 26.1% and women 13%). The most common injuries affecting the shoulder girdle are rotator cuff strains, glenohumeral dislocations, acromioclavicular dislocations and clavicle fractures. These injuries are primarily the result of four mechanisms: direct impact, axial load on an extended arm, resisted forced abduction of the arm, and external rotation forces resulting from a firmly planted ski pole in the grasp of a skier during a fall. In this article, we describe the three most common shoulder girdle injuries in winter sports along with their management and answer the most important questions for the athlete.

Off-track Hill-Sachs lesions predispose to recurrence after nonoperative management of first-time anterior shoulder dislocations

PURPOSE

The purpose of this study was to evaluate whether the presence of an off-track Hill-Sachs lesion has an impact on the recurrence rate after nonoperative management of first-time anterior shoulder dislocations.

METHODS

A retrospective cohort study was planned with a follow-up via questionnaire after a minimum of 24 months. Fifty four patients were included in the study (mean age: 29.5 years; 16 female, 38 male). All of these patients opted for primary nonoperative management after first-time traumatic anterior shoulder dislocation, in some cases even against the clinician's advice. The glenoid track and the Hill-Sachs interval were evaluated in the MRI scans. The clinical outcome was evaluated via a shoulder-specific questionnaire, ASES-Score and Constant Score. Further, patients were asked to report on recurrent dislocation (yes/no), time to recurrent dislocation, pain, feeling of instability and satisfaction with nonoperative management.

RESULTS

In 7 (13%) patients, an off-track Hill-Sachs lesion was present, while in 36 (67%) the lesion was on-track and 11 (20%) did not have a structural Hill-Sachs lesion at all. In total, 31 (57%) patients suffered recurrent dislocations. In the off-track group, all shoulders dislocated again (100%), while 21 (58%) in the on-track group and 3 (27%) in the no structural Hill--Sachs lesion group had a recurrent dislocation, p = 0.008. The mean age in the group with a recurrence was 23.7 ± 10.1 years, while those patients without recurrent dislocation were 37.4 ± 13.1 years old, p < 0.01. The risk for recurrence in patients under 30 years of age was higher than in those older than 30 years (OR = 12.66, p < 0.001). There were no significant differences between patients with on- and off-track lesions regarding patients' sex, height, weight and time to reduction and glenoid diameter. Off-track patients were younger than on-track patients (24.9 ± 7.3 years vs. 29.6 ± 13.6 years). However, this difference was not statistically significant.

CONCLUSION

The presence of an off-track Hill-Sachs lesion leads to significantly higher recurrence rates compared to on-track or no structural Hill--Sachs lesions in patients with nonoperative management and should be considered when choosing the right treatment option. Therefore, surgical intervention should be considered in patients with off-track Hill-Sachs lesions.

LEVEL OF EVIDENCE

IV.

Prospective midterm results of a new convertible glenoid component in anatomic shoulder arthroplasty: a cohort study

PURPOSE

The purpose of our study was to evaluate the clinical and radiological results of a new anatomic convertible cementless glenoid component.

METHODS

Forty-eight patients with a mean age of 67.3 years were clinically and radiologically followed-up with a mean of 49 months. Indications for glenoid replacement were A2 glenoid wear in 21.7%, B1 glenoid wear in 28.3%, B2 glenoid wear in 28.3%, B3 glenoid wear in 13%, D glenoid wear in 2.2%, and glenoid component loosening in 6.5%.

RESULTS

The Constant-Murley score improved significantly (p < 0.0001) from 50% pre-OP to 103% post-OP. Patients with a B3 glenoid type according to Walch achieved a significant (p = 0.044) lower Constant-Murley Sscore post-OP compared to patients with a B1 glenoid type (88% vs 106%). The mean subluxation index changed significantly (p < 0.0001) from 0.54 pre-OP to 0.46 post-OP. At the metal-back bone interface an incomplete radiolucent line < 1 mm was observed in two cases (4.2%) and an incomplete radiolucent line < 2 mm was observed in another two cases (4.2%). PE dissociation occurred in two cases. No glenoid loosening was observed. The implant related revision rate was 4.2% (2 cases). All components (n = 612.5%) requiring conversion to reverse were converted without any further complications or loosening.

CONCLUSION

Good functional results can be achieved in cases with a B1 and a B2 glenoid after anatomic shoulder arthroplasty using the described metal back glenoid. A conversion from an anatomic to a reverse glenoid component were possible in all cases without any further complications. Conversion of the anatomic glenoid component to a reverse system alleviates revision surgery.

A classification for partial subscapularis tendon tears

PURPOSE

The aim of the study was to analyze partial subscapularis tendon (SSC) tears and provide a descriptive classification.

METHODS

The retrospective study included 50 patients with arthroscopically confirmed partial SSC tears. Internal rotation (IR) force measurements and IR ROM have been made and compared to the healthy contralateral side. Then the footprint of the SSC was routinely investigated by arthroscopy with standardized measurement of the bony footprint lesion. The partial tears were classified according to the mediolateral and craniocaudal extension of the rupture in the transverse and coronal plane, respectively.

RESULTS

Partial SSC tears could be classified into split lesions (type 1, n = 11) and 3 further groups depending on the mediolateral peeled-off length of the bony footprint (type 2: < 10 mm, n = 20; type 3: 10-15 mm, n = 10; type 4: > 15 mm, n = 9). Type 2-4 could be further divided depending on the craniocaudal peeled-off length of the bony footprint (group A: < 10 mm, group B: 10-15 mm, group C: > 15 mm). Significantly decreased IR strength was shown for types 2-4 (p < 0.05) but not for split lesions as compared to healthy side. Types 1-4 showed significant decreased active IR ROM and all except type 3 (n.s.) which showed decreased passive IR ROM compared to the healthy side (p < 0.05).

CONCLUSION

We present a novel classification for partial SSC tears for a more detailed and reproducible description. This can help to improve the current knowledge about the appropriate treatment. It could be shown that partial tears of the subscapularis can have an impact on IR strength and motion.

LEVEL OF EVIDENCE

III.

Lesions of the biceps pulley: a prospective study and classification update

Hypothesis

The purpose of the study was to investigate which anatomic structures are affected in a series of patients with pulley lesions and whether all lesions can be classified according to the Habermeyer classification.

Methods

One hundred consecutive patients with pulley lesions were prospectively studied. During arthroscopy, lesions of the superior glenohumeral ligament (SGHL), medial coracohumeral ligament (MCHL) and/or lateral coracohumeral ligament (LCHL), adjacent rotator cuff, and biceps (long head of the biceps) were recorded. All lesions were then classified according to the Habermeyer classification. The χ² test was used for statistical analysis.

Results

There were 3 lesions in group 1, 20 in group 2, 6 in group 3, and 35 in group 4 according to the Habermeyer classification. Thirty-six lesions were not classifiable because of an intact SGHL. A lateral pulley sling (LCHL) lesion was found in 95% of the patients, and a medial pulley sling (MCHL-SGHL) lesion was noted 64%. An isolated lesion of the MCHL and/or SGHL was present in 5%, and an isolated lesion of the LCHL was found in 36%. Combined medial-lateral sling lesions were correlated with complete subscapularis tears and biceps fraying.

Conclusion

The lateral pulley sling is more often affected than the medial sling. The SGHL is not always affected, and isolated lesions of the medial sling are rare. Lesions of both slings correlated with complete subscapularis tears and fraying of the long head of the biceps. An updated classification of direct pulley lesions is proposed: type 1, lesion of the medial pulley (MCHL and/or SGHL); type 2, lesion of the lateral pulley (LCHL); and type 3, lesion of the medial and lateral pulley slings. Concomitant lesions of the indirect pulley stabilizers can be mentioned additionally according to the well-known classifications.

The importance of biomechanical properties in revision acromioclavicular joint stabilization: a scoping review

PURPOSE

Treatment of failed primary reconstruction of the unstable acromioclavicular (AC) joint remains challenging for orthopaedic surgeons. When approaching revision cases, the reason for failure has to be precisely identified. The purpose of this manuscript was to perform a critical review of the literature regarding treatment options for failed AC joint stabilization techniques and to provide a treatment algorithm for salvage procedures.

METHODS

A thorough search included electronic databases for articles published up to April 15th, 2019. Inclusion criteria were set as (1) studies that reported on clinical outcomes following surgical or conservative treatment of AC joint dislocation; (2) studies reporting on failure or complications of primary treatment; (3) chronic instabilities caused by delayed or secondary treatment as well as (4) revision and salvage procedures.

RESULTS

The search strategy identified a total of 3269 citations. The final dataset comprised 84 studies published between 1954 and 2019. A total of 5605 patients (9.63% females) were involved with a mean age of 34.5 years. Overall, complication rates varied between 5 and 88.9% in patients with AC joint instability.

CONCLUSION

In the current literature, evidence for treatment of revision AC joint instability is still lacking, however, surgical treatment continues to evolve. The importance of failure analysis and clinically relevant algorithms were highlighted in this review. Adequately restoring native joint biomechanics is needed for ensuring an optimal healing environment that will translate into patient satisfaction and long-term stability.

LEVEL OF EVIDENCE

V.

The Diagnosis and Treatment of Acute Dislocation of the Acromioclavicular Joint

BACKGROUND

The acromioclavicular joint (ACJ) is one of the more common sites of shoulder girdle injury, accounting for 4-12% of all such injuries, with an incidence of 3-4 cases per 100 000 persons per year in the general population. Current topics of debate include the proper standard diagnostic evaluation, the indications for surgery, and the best operative method.

METHODS

This review is based on publications retrieved by a selective literature search.

RESULTS

Mechanical trauma of the ACG can tear the ligamentous apparatus that holds the acromion, clavicle, and coracoid process together. Different interventions are indicated depending on the nature of the injury. In recent years, the horizontal component of the instability has received more attention, in addition to its vertical component. Persistent instability can lead to chronic, painful limitation of shoulder function, particularly with respect to working above the head. Surgical stabilization is therefore recommended for high-grade instability of Rockwood types IV and V. Modern reconstruction techniques enable selective vertical and horizontal treatment of the instability and have been found superior to traditional methods, particularly in young athletes. Arthroscopic techniques are advantageous because they are less invasive, do not require removal of implanted material, and afford the opportunity to diagnose any accompanying lesions definitively and to treat them if necessary. Surgery for acute injuries should be performed within three weeks of the trauma. For chronic injuries, additional tendon augmentation is now considered standard treatment.

CONCLUSION

High-grade ACJ instability is a complex and significant injury of the shoulder girdle that can cause persistent pain and functional impairment. The state of the evidence regarding its optimal treatment is weak. Large-scale, prospective, randomized comparative studies are needed in order to define a clear standard of treatment.

Insufficient consensus regarding circle size and bone loss width using the ratio-"best fit circle"-method even with three-dimensional computed tomography

PURPOSE

Glenoid bone integrity is crucial for shoulder stability. The purpose of this study was to investigate a non-invasive method for quantifying bone loss regarding reliability and accuracy to detect glenoid bone deficiency in standard two-dimensional (2D) and three-dimensional (3D) computed tomography (CT) measurements at different time points. It was hypothesized that the diameter of the circle used would significantly differ between raters, rendering this method inaccurate and not allowing for an exact estimation of glenoid defect size.

METHODS

Fifty-two shoulder CTs from 26 patients (26 2D-CTs; 26 3D-CTs) with anterior glenoid bone defects were evaluated by 6 raters at time 0 (T0) and at least 3 weeks after (T1) to assess the glenoid bone defect using the ratio method ("best fit circle"). Inter- and intra-rater differences concerning circle dimensions (circle diameter), measured width of bone loss and calculated percentage of bone loss (length-width-ratio) were compared in 2D- versus 3D-CT scans. The intraclass coefficient (ICC) was used to determine the inter- and intra-rater agreement.

RESULTS

The mean circle diameter difference in 2D-CT was 2.0 ± 1.9 mm versus 1.8 ± 1.5 mm in 3D-CT, respectively (p < 0.01). Mean width of bone loss in 2D-CT was 1.9 ± 1.7 mm compared to 1.7 ± 1.5 mm in 3D-CT, respectively (p < 0.01). The mean difference of bone loss percentage was 5.1 ± 4.8% in 2D-CT and 4.8 ± 4.5% in 3D-CT (p < 0.01). No significant differences concerning circle diameter, bone loss width and bone loss percentage were detected comparing T0 and T1. Circle diameter, bone loss width and bone loss percentage measurements in 3D-CT were significantly smaller compared to 2D-CT at T0 and T1 (p < 0.01). Agreement (ICC) was fair to good for all indicators of circle diameter (range 0.76-0.83), bone loss width (range 0.76-0.86) and percentage of bone loss (range 0.85-0.91). Overall, 3D-CT showed superior agreement compared to 2D-CT.

CONCLUSION

The ratio method varies in all glenoid parameters and is not valid for consistently quantifying glenoid bone defects even in 3D computed tomography. This must be taken into consideration when determining proper surgical treatment. The degree of glenoid bone loss alone should not be used to decide for or against a bony procedure. Rather, it is more important to define a defect size as "critical" and to also take other patient-specific factors into consideration so that the best treatment option can be undertaken. Application of the "best fitting circle" is a source of error when using the ratio method; therefore, care should be taken when measuring the circle diameter.

LEVEL OF EVIDENCE

III.

[Operative treatment of stiff shoulder : Arthroscopic arthrolysis, mobilization under anesthesia and postoperative management]

The operative treatment of stiff shoulder using arthroscopically assisted arthrolysis is indicated in patients with persistent, symptomatic and therapy-resistant movement restrictions. Patients should be informed about relevant risks, supervised rehabilitation and possible recurrences. The surgical procedure provides a precise and controlled semicircular capsulotomy and is followed by an intensive rehabilitation program in order to minimize the risk of recurrences.

[Shoulder Osteoarthritis-pathogenesis, classification, diagnostics and treatment]

Primary osteoarthritis of the shoulder represents a destructive joint disease with associated synovitis, which in the first line seems to be genetically determined. Clinically, patients suffer from shoulder pain with progressive impairment of both active and passive range of motion. The diagnostics include a clinical examination, imaging by native radiography and magnetic resonance imaging (MRI) for assessment of the rotator cuff. Current classification systems consider the formation of humeral osteophytes, glenoid morphology and loss of humeral sphericity. Non-surgical measures include, apart from topical and oral analgesics, injection of corticosteroids and hyaluronic acid supported by physiotherapeutic measures. After failure of non-surgical therapeutic measures, arthroscopic joint-preserving arthroplasty in terms of the comprehensive arthroscopic management (CAM) procedure can be performed in young patients with early stage osteoarthritis, whereas in advanced stages endoprosthetic joint replacement is indicated.

Arthroscopic Coracoclavicular and Acromioclavicular Stabilization of Acute Acromioclavicular Joint Dislocation By Suspensory Fixation System

Arthroscopic stabilization of acute acromioclavicular joint dislocations using coracoclavicular suspension techniques has become more popular, but lack of horizontal stability is a major concern that furthermore affects the final outcome. We present an arthroscopic technique to stabilize acute acromioclavicular joint dislocations in both the vertical and horizontal planes, with better results than conventional coracoclavicular suspension techniques.

Sternoclavicular Joint Reconstruction Fracture Risk Is Reduced With Straight Drill Tunnels and Optimized With Tendon Graft Suture Augmentation

Background:

Despite the rare entity of sternoclavicular joint (SCJ) instability, a variety of different reconstruction techniques for SCJ dislocations have been described. A technique with oblique drilling has been proposed to reduce intraoperative risks.

Purpose:

To biomechanically investigate different cerclage reconstruction techniques and the benefit of additional reinforcement using suture tape.

Study Design:

Controlled laboratory study.

Methods:

Reconstructed artificial bone specimens were mounted on a mechanical testing machine. They were subjected to anterior and posterior translation, analyzing ultimate strength, displacement, stiffness, and elongation. For stage 1, different angulations of the drill tunnels through the sternum and clavicle were compared. Straight drill tunnels from anterior to posterior were compared with 45° oblique drill tunnels. For stage 2, three different materials for cerclage reconstruction were compared: (1) suture tape alone (FT group), (2) tendon graft alone (tendon group), and (3) tendon graft with suture tape augmentation (tendon+FT group).

Results:

For the FT group, in the anterior and posterior directions, straight drill holes resulted in a significantly higher load to failure (936.9 ± 122.5 N) compared with oblique ones (434.5 ± 20.2 N) (P < .0001). During cyclic testing, all specimens with straight drill holes survived the 5- to 550-N step, while all specimens with oblique ones failed during the 5- to 450-N step. Analyzing the graft material choice, the mean load to failure was 556.6 ± 174.3 N for the tendon group, 936.9 ± 122.5 N for the FT group, and 767.0 ± 110.7 N for the tendon+FT group (P = .089). The stiffness of the tendon+FT group was significantly lower than that of the FT group and significantly higher than that of the tendon group.

Conclusion:

Oblique tunnel placement during SCJ reconstruction, while reducing the intraoperative risk, results in decreased primary stability of the construct. Tendon graft reconstruction with suture tape augmentation leads to enhanced stability and optimizes biomechanical properties of the construct.

Clinical Relevance:

The surgical technique with straight drill holes has superior initial biomechanical properties and may likewise produce superior clinical outcomes in the treatment of SCJ instability. Suture tape augmentation can provide additional stability to reconstruction procedures.

Single versus double row suture anchor fixation for greater tuberosity fractures - a biomechanical study

BACKGROUND

Fractures of the humeral greater tuberosity (GT) are a frequent injury progressively treated with arthroscopic suture anchor repair. Yet, no biomechanical study has been performed comparing fixation strength of arthroscopic single- (SR) vs. double row (DR) fixation.

METHODS

Standardized fractures of the greater tuberosity were created in 12 fresh frozen proximal humeri. After random assignation to the SR or DR group the fixed humeri were tested applying cyclic loading to the supraspinatus and infraspinatus tendon. Load to failure and fragment displacement were assessed by means of an electrodynamic material testing machine using an optical tracking system.

RESULTS

Load to failure values were higher in the DR group (649 N; ±176) than in the SR group (490 N; ±145) however without statistical significance (p = .12). In greater tuberosity displacement of 3-5 mm surgical treatment is recommended. The fixing constructs in this study did not reach displacement landmarks of 3 or 5 mm before construct failure as shown in previous studies. Thus the applied traction force (N) at 1 mm displacement was analyzed. In the SR group the load at 1 mm displacement was 277 N; ±46 compared to 260 N; ±62 in the DR group (p = .65).

CONCLUSION

The results suggest that both techniques are viable options for refixation of greater tuberosity fractures.

LEVEL OF EVIDENCE

Laboratory study.

Glenoid deformity in the coronal plane correlates with humeral head changes in osteoarthritis: a radiographic analysis

BACKGROUND

A variety of measurements can be used to assess radiographic osteoarthritic changes of the shoulder. This study aimed to analyze the correlation between the radiographic humeral-sided Samilson and Prieto classification system and 3 different radiographic classifications describing the changes of the glenoid in the coronal plane.

METHODS

The study material included standardized radiographs of 50 patients with idiopathic osteoarthritis before anatomic shoulder replacement. On the basis of radiographic measurements, the cases were evaluated using the Samilson and Prieto grading system, angle β, inclination type, and critical shoulder angle by 2 independent observers.

RESULTS

Classification measurements showed an excellent agreement between observers. Our results showed that the humeral-sided Samilson and Prieto grading system had a statistically significant good correlation with angle β (observer 1, r = 0.74; observer 2, r = 0.77; P < .05) and a statistically significant excellent correlation with the inclination type of the glenoid (observer 1, r  = 0.86; observer 2, r = 0.8; P < .05). A poor correlation to the critical shoulder angle was observed (r = -0.14, r = 0.03; P > .05).

CONCLUSIONS

The grade of humeral-sided osteoarthritis according to Samilson and Prieto correlates with the glenoid-sided osteoarthritic changes of the glenoid in the coronal plane described by the angle β and by the inclination type of the glenoid. Higher glenoid-sided inclination is associated with higher grade of osteoarthritis in primary shoulder osteoarthritis.

Outcomes and complications following graft reconstruction for anterior sternoclavicular joint instability

PURPOSE

Publications describing tendon graft reconstruction for anterior sternoclavicular joint (SCJ) instability are rare and usually refer to small patient numbers. The aim of this study was to systematically review the literature regarding outcomes and complications following tendon graft reconstruction techniques for anterior SCJ instability.

METHODS

An online database was systematically searched to identify studies on graft reconstruction for anterior SCJ instability. Reported outcome scores were graded as excellent, good, fair and poor to summarize the study results. All reported complications were recorded.

RESULTS

Five articles with a total of 80 patients met the inclusion criteria. Reported outcomes were excellent in 10 %, good in 89 % and fair in 1 %. Recurrent instability was found in 10 % of the patients, and 5 % underwent revision surgery due to persistent impairment of shoulder function related to SCJ instability or osteoarthritis.

CONCLUSION

Surgical stabilization techniques for the SCJ using autologous tendon grafts have shown to be safe and reliable and make better patients' pain situation and shoulder function. However, a certain amount of impairment might persist, which needs to be discussed with patients. Severe complications were rare and revision rates were as low as 5 %. Therefore, graft reconstruction techniques should be considered for patients with chronic anterior SCJ instability after a course of failed conservative treatment. This study is valuable for clinicians in daily clinical practice when dealing with this difficult-to-treat pathology and can help surgeons to better predict the clinical outcomes and complications following SCJ graft reconstruction. It should, however, not lead to underestimation of the potential risks of the procedure.

LEVEL OF EVIDENCE

Systematic review, Level IV.

[Arthroscopically assisted techniques for treatment of acute and chronic acromioclavicular joint injuries]

Acute and chronic acromioclavicular (AC) joint dislocation is frequently encountered in the routine clinical practice. This injury can lead to significant impairment of shoulder girdle function. Therapy based on the severity of injury is recommended to re-establish correct shoulder function. The static radiographic Rockwood classification is used to define the degree of dislocation but the clinical aspects and functional x-ray imaging of horizontal AC joint instability should also be considered for selection of the appropriate procedure. Rockwood grades I and II injuries are treated non-operatively with early functional exercise. The approach for Rockwood grade III injuries should be individual and patient-specific, with non-surgical procedures for low functional requirement patients with a high risk for surgical interventions. For patients with high demands on shoulder function surgery is recommended. A detailed diagnostic assessment frequently reveals Rockwood grade III injuries to be type IV injuries. Rockwood types IV and V AC joint dislocations require surgery for sustained stability. Treatment of acute injuries is recommended within 1-3 weeks after trauma but there is no clear evidence of a cut-off for the presence of chronic injuries. Various surgical techniques have been described in the literature. This article presents an arthroscopically assisted technique that addresses both vertical and horizontal instability of the AC joint.

Arthroscopically Assisted Acromioclavicular and Coracoclavicular Ligament Reconstruction for Chronic Acromioclavicular Joint Instability

Acromioclavicular (AC) joint injuries are common injuries, especially in the young and active, male population. AC joint injuries account for 12% of all injuries of the shoulder girdle in the overall population. Although conservative treatment is recommended for Rockwood type I and type II injuries, there is controversial debate about optimal treatment for type III injuries. High-grade injuries are typically treated operatively to avoid painful sequelae. A vast number of different surgical methods have been described over the past few decades. Recent advances in arthroscopic surgery have enabled the shoulder surgeon to treat acute and chronic AC lesions arthroscopically assisted. Clinical studies have already shown good and reliable results. Although surgeons agree that a biological augmentation is required to minimize the risk of recurrent instability in chronic cases, a gold standard still needs to be defined. We present an arthroscopically assisted biological augmentation technique to reconstruct the AC and coracoclavicular ligaments, protected by a button-suture tape construct for chronic AC joint instability. The presented arthroscopic biological augmentation technique uses less and/or smaller drill holes in the clavicle and coracoid than previously described, thus reducing weakening of the bony structures. At the same time it enhances both horizontal and vertical stability.

Impact of rotator cuff surgery on postoperative sporting activity

INTRODUCTION

The aim of this study was to systematically review the literature for the impact of rotator cuff tear (RCT) surgery on postoperative sporting activity in professional and recreational athletes.

EVIDENCE ACQUISITION

To identify any published clinical study on return to sports data for athletes following rotator cuff surgery, a systematic search in literature was conducted. Inclusion criteria were partial and full-thickness rotator cuff tears and any open or arthroscopic RCT surgery in sports participating people. E-published and print journal articles with a Level of Evidence I, II, III and IV were acceptable. The review was based on using PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) Guidelines. Included studies were assessed for reporting quality by using the Coleman Methodology Score (CMS).

EVIDENCE SYNTHESIS

Twelve studies including 314 athletes met the inclusion criteria. From the 12 identified studies there were 10 studies with Level IV evidence with an average CMS of 45.2 (poor rating) and 2 studies with Level III evidence with an average CMS of 47 (poor rating). The mean time for returning to sports participation following RCT surgery was 8.3 months (4.8-10.7 months), 79% of all athletes returned to sports participation, therefrom 60.5% were able to return to their pre-injury level of competition. Forty-eight percent of the professional overhead athletes had reached their pre-injury level after RCT surgery. 20.3% participated at a lower level. Amongst professional overhead athletes, 54.5% were treated using arthroscopic debridement and 32.5% were treated using an arthroscopic repair technique. RTS rate to prior level of competition for arthroscopic debridement was 53.7% and 47.5% for arthroscopic repair. For recreational athletes RCT repair was reported for 62%. RTS rate to prior level of competition was 69.4% in this group of athletes. 38% were treated with an arthroscopic RCT repair. RTS rate to same level was 76% in this group. In contact athletes arthroscopic repair resulted in RTS rate of 91% to prior level of competition.

CONCLUSIONS

Approximately 50% of professional overhead athletes return to their prior level of competition after arthroscopic RCT surgery. Professional athletes underwent arthroscopic surgery more often compared to recreational athletes with a comparable RTS rate after either arthroscopic debridement or repair. Open repair of RCT is mainly used for recreational athletes and results in a RTS rate of 70% to same level of competition. Although there is a lack of high quality studies in recent literature regarding this topic this study shows that RCT surgery has a crucial impact on postoperative level of competition in professional and recreational athletes. The present study enables the sports physician to better understand and discuss the consequences of rotator cuff surgery with athletes in daily clinical practice.

Anatomic stemless shoulder arthroplasty and related outcomes: a systematic review

BACKGROUND

The latest generation of shoulder arthroplasty includes canal-sparing respectively stemless designs that have been developed to allow restoration of the glenohumeral center of rotation independently from the shaft, and to avoid stem-related complications. The stemless prosthesis design has also recently been introduced for use in reverse arthroplasty systems.

METHODS

We systematically reviewed the literature for studies of currently available canal-sparing respectively stemless shoulder arthroplasty systems. From the identified series, we recorded the indications, outcome measures, and humeral-sided complications.

RESULTS

We identified 11 studies of canal-sparing respectively stemless anatomic shoulder arthroplasty implants, published between 2010 and 2016. These studies included 929 cases, and had a mean follow-up of 26 months (range, 6 to 72 months). The rates of humeral component-related complications ranged between 0 and 7.9 %. The studies reported only a few isolated cases of complications of the humeral component. Some arthroplasty systems are associated with radiological changes, but without any clinical relevance.

CONCLUSIONS

All of the published studies of canal-sparing respectively stemless shoulder arthroplasty reported promising clinical and radiological outcomes in short to midterm follow-up. Long-term studies are needed to demonstrate the long-term value of these kind of implants.

Return-to-activity after anatomical reconstruction of acute high-grade acromioclavicular separation

Background

To evaluate return-to-activity (RtA) after anatomical reconstruction of acute high-grade acromioclavicular joint (ACJ) separation.

Methods

A total of 42 patients with anatomical reconstruction of acute high-grade ACJ-separation (Rockwood Type V) were surveyed to determine RtA at a mean 31 months follow-up (f-u). Sports disciplines, intensity, level of competition, participation in overhead and/or contact sports, as well as activity scales (DASH-Sport-Module, Tegner Activity Scale) were evaluated. Functional outcome evaluation included Constant score and QuickDASH.

Results

All patients (42/42) participated in sporting activities at f-u. Neither participation in overhead/contact sports, nor level of activity declined significantly (n.s.). 62 % (n = 26) of patients reported subjective sports specific ACJ integrity to be at least the same as prior to the trauma. Sporting intensity (hours/week: 7.3 h to 5.4 h, p = .004) and level of competition (p = .02) were reduced. If activity changed, in 50 % other reasons but clinical symptoms/impairment were named for modified behavior. QuickDASH (mean 6, range 0–54, SD 11) and DASH-Sport-Module (mean 6, range 0–56, SD 13) revealed only minor disabilities at f-u. Over time Constant score improved significant to an excellent score (mean 94, range 86–100, SD 4; p < .001). Functional outcome was not correlated with RtA (n.s.).

Conclusion

All patients participated in sporting activities after anatomical reconstruction of high-grade (Rockwood Type V) ACJ-separation. With a high functional outcome there was no significant change in activity level (Tegner) and participation in overhead and/or contact sports observed. There was no correlation between functional outcome and RtA. Limiting, there were alterations in time spent for sporting activities and level of competition observed. But in 50 % those were not related to ACJ symptoms/impairment. Unrelated to successful re-established integrity and function of the ACJ it should be considered that patients decided not return-to-activity but are very content with the procedure.

Clinical outcomes after autograft reconstruction for sternoclavicular joint instability

BACKGROUND

Instability of the sternoclavicular (SC) joint is a rare condition. However, in some cases, SC joint instability may lead to persistent pain and impairment of shoulder function that requires surgical management. This study evaluated clinical outcomes after SC joint reconstruction with hamstring tendon autograft in patients with SC joint instability.

METHODS

From December 2010 to January 2014, 21 reconstructions of the SC joint with hamstring tendon autograft were performed. Outcomes data were prospectively collected and retrospectively reviewed. Data analyzed included American Shoulder and Elbow Surgeons score, Quick Disability of the Arm, Shoulder and Hand, physical component of the Short Form 12, and Single Assessment Numeric Evaluation scores. Pain with activities of daily living, work, and sleep were separately analyzed along with painless use of arm for activities. Patients were also questioned regarding postoperative satisfaction.

RESULTS

Nine women and 10 men (2 bilaterals), with a mean age of 30 years (range, 15-56 years), were monitored for a mean of 2 years (range, 12-36 months) postoperatively. Mean American Shoulder and Elbow Surgeons, Quick Disability of the Arm, Shoulder and Hand, and Single Assessment Numeric Evaluation scores significantly improved (P < .001). Pain scores also improved over preoperative baselines, including pain with activities of daily living, work, and sleep (P < .001). Median satisfaction at final follow-up was 8.5 (range, 7-10). There were no intraoperative or postoperative complications and no cases of recurrent instability.

CONCLUSION

Free hamstring tendon autograft reconstruction for SC joint instability resulted in significantly improved clinical outcomes with high patient satisfaction and no intraoperative or postoperative complications.

Effect of three remplissage techniques on tendon coverage and shoulder kinematics: a navigated robotic biomechanical study

BACKGROUND

In addition to Bankart repair engaging Hill-Sachs defects in glenohumeral instability have been treated successfully with remplissage procedure. The purpose of this study was to compare three remplissage techniques regarding (I) ability of preventing Hill-Sachs defect from engaging, (II) influence on glenohumeral rotational torque, and (III) resulting tendon coverage over the Hill-Sachs defect.

METHODS

Standardized engaging Hill-Sachs defects and Bankart lesions were created in n = 7 fresh frozen human shoulder specimens. Besides Bankart repair three remplissage techniques (T) with double anchor position in the valley of the defect zone were studied: T1, knots tied over anchors; T2, knots tied between anchors (double-pulley); T3, knotless anchors with a suture tape. A parallel position-orientation and force-moment controlled navigated roboticsystem was used to compare prevention of Hill-Sachs defect engagement and torque [Nm]. Pressure sensitive film was used to study area of infraspinatus tendon coverage over Hill-Sachs defect [%].

RESULTS

All remplissage techniques prevented engagement of the Hill-Sachs defect without showing any construct failures. Regarding humeral torque there were significant impairments observed between intact conditions and the three investigated repair techniques in 60° abduction and ≥30° external rotation (p < .04). There was no significant difference in torque between intervention groups (n.s.). With a mean coverage of 26.8 % over the defect zone the knotless suture tape technique (T3) significantly improved area of soft tissue coverage compared to the other techniques (p = .03).

CONCLUSION

All remplissage techniques prevented engagement of the Hill Sachs defect. With high abduction and external rotation ≥30° all techniques showed significant higher humeral torque compared to the intact specimens, while there was not one technique superior over the others. The suture tape technique conferred the largest and most effective area of tendon coverage over the Hill-Sachs defect zone. Long-term success of the remplissage procedure can possibly be enhanced by increasing the interface area of tendon coverage over the Hill-Sachs defect. Clinical studies will be necessary to proof potential benefits for clinical outcome.

Double intramedullary cortical button versus suture anchors for distal biceps tendon repair: a biomechanical comparison

PURPOSE

The aim of this biomechanical in vitro study was to compare the novel technique of double intramedullary cortical button (DICB) fixation with the well-established method of suture anchor (SA) fixation for distal biceps tendon repair.

METHODS

A matched-pair analysis (24 human cadaveric radii) was performed with respect to cyclic loadings and failure strengths. Twelve specimens per group were cyclically loaded for 1,000 cycles at 1.5 Hz from 5 to 50 N and from 5 to 100 N, respectively. The tendon-bone displacement was optically analysed using the Image J Software (National Institute of Health). Afterwards, all specimens were pulled to failure. Maximum load to failure and mode of failure were recorded.

RESULTS

All DICB constructs passed the cyclic loading test, whereas 4 of the 12 specimens within the SA group failed by anchor pull-out. Cyclic loading showed a mean tendon-bone displacement of 0.6 ± 1.4 mm for the DICB group and 1.4 ± 1.4 mm for the SA group (n.s.) after 1,000 cycles with 50 N, and a mean displacement of 2.1 ± 2.4 mm for the DICB group and 3.5 ± 3.7 mm for the SA group (n.s.) after 1,000 cycles with 100 N. Load to failure testing showed a mean failure load of 312 ± 76 N and a stiffness of 67.1 ± 11.7 N/mm for the DICB technique. The mean load to failure for the SA repair was 200 ± 120 N (n.s.) and the stiffness was 55.9 ± 21.3 N/mm (n.s.).

CONCLUSIONS

The novel technique of DICB fixation showed small tendon-bone displacement during cyclic testing and reliable fixation strength to the bone in load to failure. Moreover, all DICB constructs passed cyclic loadings without failure. Based on the current findings, a more aggressive postoperative rehabilitation may be allowed for the DICB repair in clinical use.

Biomechanical evaluation of knotless anterior and posterior Bankart repairs

PURPOSE

The value of modern tape-like suture materials and the influence of the number of anchors inserted for arthroscopic Bankart repairs compared to the intact state have yet to be investigated. It was hypothesised: (1) suture-tape repairs will show higher biomechanical strength than common suture repairs, (2) four anchors will be stronger than three, and (3) the strength of the native capsulolabral complex will be greater than repairs.

METHODS

Six matched-paired cadaveric shoulders received Bankart lesions/reconstructions and three underwent intact state testing. Anteroinferior repairs compared suture and suture-tape repairs using three anchors, while posteroinferior repairs compared three and four suture anchors using common sutures. An established testing protocol was run for biomechanical testing.

RESULTS

There was no significant difference in the maximum loads, loads at 2 mm displacement, stiffness or energy between repair groups or between repairs and the intact state (n.s.). However, failure modes were different: 16/24 (66.7%) of the repair groups showed glenoid labrum detachment compared to 2/12 (16.7%) within the intact state group (P = 0.012).

CONCLUSIONS

While biomechanical parameters of repairs and intact states showed equivalence, failure-mode analysis reaffirms previous findings that capsulolabrum complex refixation is weaker than the native attachment. Therefore, in daily clinical practice, type of suture is secondary and insertion of a fourth anchor will be unlikely to add strength but may confer additional risk and cost.

[Surgical stabilization of acute/chronic sternoclavicular instability with autologous gracilis tendon graft]

SURGICAL OBJECTIVE

Restoration of joint stability and unimpaired, painless shoulder function

INDICATIONS

Chronic and recurrent painful instabilities of the sternoclavicular (SC) joint. Locked posterior instability.

CONTRAINDICATIONS

A lack of autologous tendon grafts due to harvesting of all hamstring grafts during prior surgical procedures and general contraindications for surgery/anesthesia.

SURGICAL TECHNIQUE

Joint stability is restored by a gracilis tendon allograft passed through two drill holes in the sternum and the medial clavicle using a figure-of-eight configuration.

POSTOPERATIVE MANAGEMENT

Immobilization in a sling for 6 weeks with passive motion exercises followed by 6 weeks of active mobilization without weight-bearing. After 12 weeks, continuous remobilization with increasing weight-bearing.

RESULTS

SC joint reconstruction using an autologous tendon graft in a figure-of-eight configuration can significantly improve shoulder function and pain relief. However, some impairment of shoulder function or persistent complaints may occur, which must be discussed with the patient in the preoperative setting.

Instability and degenerative arthritis of the sternoclavicular joint: a current concepts review

BACKGROUND

Injuries to the sternoclavicular (SC) joint typically occur with high-energy mechanisms such as those obtained in automobile accidents or contact sports. Many disorders of the SC joint can be treated nonoperatively. However, surgical treatment may be indicated for locked posterior dislocations; symptomatic, chronic instability; or persistent, painful osteoarthritis that fails nonoperative therapy.

PURPOSE

To provide an updated review on the current diagnosis and management of instability and degenerative arthritis of the SC joint.

STUDY DESIGN

Current concepts review.

METHODS

A preliminary PubMed database search using the terms sternoclavicular instability, dislocation, arthritis, resection, and stabilization was performed in August 2012. All anatomic and biomechanical studies, review articles, case reports, case series, and technique papers that were relevant to the topic were included.

RESULTS

The search identified 929 articles, 321 of which, after screening of the titles and abstracts, were considered potentially relevant to this study. Of the 321 articles, 30 were anatomic or imaging studies, 2 were biomechanical studies, 69 were review papers, 189 were case series or reports, and 31 were technique papers. The majority of these studies were classified as evidence level 4, with a few scattered level 3 studies. Because the level of evidence obtained from this search was not adequate for systematic review (or meta-analysis), a current concepts review of the diagnosis and management of SC joint instability and degenerative arthritis is presented.

CONCLUSION

Injuries to the SC joint are uncommon. Recognition and classification of these injuries are critical to proper management, thus minimizing potential long-term sequelae such as posttraumatic arthritis and recurrent instability. Although nonoperative therapy is the modality of choice in anterior dislocations, posterior dislocations require special attention because of the presence of vulnerable posterior hilar structures. Surgical management of chronic instability and degenerative arthritis of the SC joint includes resection arthroplasty of the medial clavicle with or without reconstruction of the sternoclavicular ligaments with graft material. Although resection is typically performed open, an arthroscopic technique is described that theoretically decreases operating and recovery times while also decreasing the risk of iatrogenic injury. Currently, when reconstruction is needed for stability, a figure-of-8 graft reconstruction is the recommended method based on biomechanical data and small clinical series.

[Tibial plateau fractures in alpine skiing--return to the slopes or career end?]

BACKGROUND

Fractures of the tibial plateau are among the most severe injuries of the knee joint and are often the result of sports accidents, especially skiing accidents.

PATIENTS/MATERIALS AND METHODS

Between January 2003 and March 2009, a total of 37 skiers with tibial plateau fractures were treated operatively at Klinikum rechts der Isar, Munich (level I trauma center); 28 patients with a minimum follow-up of 24 months were included in this study. Sporting activity was determined at the time of injury and at the time of survey at an average follow-up of 49.0 months postoperatively.

RESULTS

At the time of the survey, 92.9% of all patients were engaged in sports; only 12 of the 28 patients returned to skiing. Of the competitive athletes (n = 5 at time of injury) no patient returned to competition. The number of different sporting activities declined significantly from 6.4 before the injury to 4.6 after the injury. The activity duration per week, being 5.0 hours at the time of injury, declined to 4.4 hours, although the difference is statistically not significant. The Lysholm score, 97.5 points before accident, illustrated a significant decline to 84.4 points. Activity levels according to the Tegner scale declined significantly from 6.1 to 4.7 after the tibial plateau fracture.

CONCLUSION

The majority of patients could not return to their previous level of activity. For patients playing competitive sports, the tibial plateau fracture can be a career ender. Overall, 92.9% of the patients returned to sports, but we noticed a post-injury shift toward activities with less impact. Only 12 of the 28 (42.9%) skiers with tibial plateau fractures returned to skiing.

Normal curvature of glenoid surface can be restored when performing an inlay osteochondral allograft: an anatomic computed tomographic comparison

PURPOSE

The purpose of this study was to quantitatively measure the morphology of the glenoid and to assess feasibility of using the medial tibial plateau surface as a donor for osteoarticular allograft reconstruction of the glenoid.

METHODS

Using computed tomography (CT), 10 tibias and 10 scapular models from our database (5 males and 5 females in each group) were randomly selected. Commercial software (Mimics, Materialize, Inc., Plymouth, MI) was used to extract the bone contours from the CT images and to reconstruct the 3-dimensional (3D) geometry of the scapula and tibia. By utilizing the software Creo Elements/Pro 5.0 (Parametric Technology Corp., Needham, MA), mean length and width of both the glenoid and medial tibial plateau were calculated. Radius of curvature was then measured in each 3D CT model at three intermediate segment points that were established within the length line at 25, 50, and 75 percent from superior to inferior in the glenoid and from posterior to anterior in the medial tibial plateau. Statistical analysis was performed and determined to be significant for P < 0.05.

RESULTS

The mean (± SD) radius of curvature values at the established 25, 50, and 75 percent segments of the glenoid were 47.4 ± 17.5 mm, 51.2 ± 12.4 mm, and 45.9 ± 17.0 mm, respectively. For the medial tibial plateau, the radius of curvature at 25, 50, and 75 percent were 43.5 ± 9.7 mm, 37.4 ± 14.3 mm and 52.3 ± 21.5 mm, respectively. Values of the glenoid length were 34.0 ± 2.9 mm, and width values were 24.4 ± 2.3 mm. For the medial tibial plateau, the length was 42.6 ± 2.7 mm, and the width was 23.3 ± 4.3 mm. There was no statistical difference in the radius of curvature and dimensional surface area between the glenoid and medial tibial plateau surfaces.

CONCLUSION

The 3D CT-based anatomic study found that there is a statistically similar relationship in the radius of curvature of the glenoid and the medial tibial plateau surface. This concept may allow the medial tibial plateau to be used as a donor for osteoarticular allograft reconstruction of the glenoid, especially in young patients where previous studies have demonstrated that the success rate in shoulder replacements is not as good as in older patients.

Functional results following titanium elastic-stable intramedullary nailing (ESIN) of mid-shaft clavicle fractures

INTRODUCTION While plate fixation remains the gold standard for surgical treatment for displaced mid-shaft clavicle fractures (DMCF), intramedullary fixation has emerged as a promising alternative. However, due to its more demanding technique and depending on the fracture's nature, an open reduction can be necessary. Aim of this study was to compare the outcome of open reduction versus closed reduction of DMCF using ESIN. PATIENTS AND METHODS Titanium Elastic Nail (TEN) were used to treat 40 patients undergoing minimally invasive ESIN between December 2006 and July 2009. A total of 19 patients were treated with a closed reduction and 21 patients required open reduction. RESULTS Open reduction increases operative time and fluoroscopy time significantly versus closed reduction (open 80.8 ± 35.9 min; closed 30.5 ± 8.5 min). No significant differences were found regarding strength measurement (75.7 ± 22.0 N in the closed group and 74.2 ± 26.0 N in the open group), DASH score (5.1 ± 6.5 closed group vs. 5.8 ± 7.3 open group) and Constant score (87.4 ± 9 points closed group vs. 85.3 ± 7.2 points open group). No major complications were observed. CONCLUSION There was no significant difference comparing patients who were treated with an open versus a closed technique. If appropriately indicated we believe that using ESIN is an adequate and successful operative technique for DMCF. There were no significant differences in shoulder function after either procedure.

Complications after anatomic fixation and reconstruction of the coracoclavicular ligaments

BACKGROUND

Reconstruction of the disrupted acromioclavicular (AC) joint has historically resulted in high complication rates. As a result, there has been a move toward anatomic coracoclavicular (CC) ligament fixation and reconstruction, owing to its numerous biomechanical advantages and perceived clinical advantages.

PURPOSE

To report and analyze the unique complications associated with these anatomic CC ligament procedures using either cortical fixation buttons (CFBs) or tendon grafts (TGs) and to evaluate the effect that these complications have on patient outcomes.

STUDY DESIGN

Case series; Level of evidence, 4.

METHODS

From January 2006 until May 2011, a total of 59 primary anatomic CC ligament procedures were performed using either CFBs or TGs. Demographic, surgical, subjective (including the American Shoulder and Elbow Surgeons [ASES], quick Disabilities of the Arm, Shoulder and Hand [QuickDASH], Short Form-12 [SF-12], and Single Assessment Numeric Evaluation [SANE] scores), and radiographic data along with surgical complications were prospectively collected and retrospectively analyzed. Construct survivorship, defined as the maintenance of reduction of the AC joint, was calculated using the Kaplan-Meier method at 12- and 24-month intervals.

RESULTS

Surgical treatment for AC joint dislocations was performed in 3 women (4 shoulders) and 52 men (55 shoulders) with a mean age of 43.6 years (range, 18-71 years); 13 shoulders (22.0%) underwent fixation using the CFB technique, and 46 shoulders (78.0%) underwent reconstruction using the TG technique. The overall complication rate was 27.1% (16/59) in this study. There were 3 complications (23.1%) in the CFB group, including 1 coracoid fracture and 2 cases of hardware failure resulting in a loss of reduction. There were 13 complications (28.2%) in the TG group, including 4 graft ruptures, 2 clavicle fractures, 1 case of hardware failure, 1 hypertrophic distal clavicle, 2 cases of hardware pain, 1 suture granuloma, 1 case of adhesive capsulitis, and 1 case of axillary neuropathy. Twelve- and 24-month construct survivorship was calculated to be 86.2% and 83.2%, respectively. Of the 43 shoulders that did not have a complication, mean ASES scores significantly improved from 57.5 (range, 0-97) to 91 (range, 63-100) (P < .001), and mean SF-12 physical component summary scores significantly improved from 45 (range, 25-58) to 56 (range, 43-65.8) (P < .001) after a mean 2.4-year follow-up (range, 1.0-5.7 years). There were no significant differences in outcomes between those that did and did not experience a complication, with the exception that those with complications had significantly decreased median patient satisfaction compared with those without complications (3.5 vs 9, respectively; P = .049).

CONCLUSION

Anatomic procedures to treat disrupted CC ligaments using either CFBs or TGs resulted in an overall complication rate of 27.1% (16/59). Construct survivorship was calculated to be 86.2% at 12 months and 83.2% at 24 months. Good to excellent outcomes could only be reported in those patients who did not have a complication.

CT-based quantitative assessment of the surface size and en-face position of the coracoid block post-Latarjet procedure

BACKGROUND

The success of shoulder stabilization with the Latarjet procedure might depend on the size of the bone graft and the positioning of the coracoid at the glenoid. The aim of this study was to quantitatively assess the surface of the coracoid bone graft and to assess its positioning in the en-face view.

METHOD

A series of 21 patients (17 men, 4 women, 26.1 ± 6.8 years-9 right, 12 left shoulders) were prospectively included and followed up with CT scans between December 2010 and April 2012 at an average of 2.4 ± 0.7 months postoperatively. The retrospective analysis of the CT scans was performed with Osirix™ software. The coracoid surface was measured (cm(2)) in the sagittal plane. The positioning in relation to the center of the circumscribed circle of the glenoid was determined in the en-face clock face view of the glenoid.

RESULTS

The grafts had a mean surface of 1.61 ± 0.51 cm(2) (mean ± standard deviation). The coracoid grafts were located between 01:05 hours (32.5°) and 05:33 hours (166.6°). Mean positioning was 02:00 hours (59.8° ± 16.1°) to 04:26 hours (133.0° ± 16.9°). The extent of the grafts was 73.2° ± 14.3°.

DISCUSSION

The positioning of the coracoid graft on the clock face of the glenoid is situated in the decisive zone of 02:30-04:20 hours. The mean surface of the graft is smaller than expected from anatomical studies, but restores in defect situations bone stock in the potential defect areas at the anterior glenoid rim.

LEVEL OF EVIDENCE

Level IV, prospective case series, treatment study.

Modified arthroscopic McLaughlin procedure for treatment of posterior instability of the shoulder with an associated reverse Hill-Sachs lesion

Traumatic posterior shoulder dislocations are often accompanied by an impression fracture on the anterior surface of the humeral head known as a "reverse Hill-Sachs lesion". This bony defect can engage on the posterior glenoid rim and subsequently lead to recurrent instability and progressive joint destruction. We describe a new modified arthroscopic McLaughlin procedure, which allows for filling of the bony defect with the subscapularis tendon and subsequently prevents recurrence of posterior instability. This technique creates a double-mattress suture providing a large footprint for the subscapularis and a broader surface area to allow for effective tendon to bone healing. Furthermore, it obviates the need for detaching the subscapularis tendon and avoids the morbidity potentially associated with open procedures. Level of evidence V.

Biomechanical comparison of intramedullary cortical button fixation and interference screw technique for subpectoral biceps tenodesis

PURPOSE

The purpose of this study was to biomechanically evaluate a new technique of intramedullary cortical button fixation for subpectoral biceps tenodesis and to compare it with the interference screw technique.

METHODS

We compared intramedullary unicortical button fixation (BicepsButton; Arthrex, Naples, FL) with interference screw fixation (Bio-Tenodesis screw; Arthrex) for subpectoral biceps tenodesis using 10 pairs of human cadaveric shoulders and ovine superficial digital flexor tendons. After computed tomography analysis, the specimens were mounted in a testing machine. Cyclic loading was performed (preload, 5 N; 5 to 70 N at 1.5 Hz for 500 cycles), recording the displacement of the tendon. Load to failure and stiffness were subsequently evaluated with a load-to-failure test (1 mm/s).

RESULTS

Cyclic loading showed a displacement of 11.3 ± 2.8 mm for intramedullary cortical button fixation and 9 ± 1.7 mm for interference screw fixation (P = .112). All specimens within the cortical button group passed the cyclic loading test, whereas 3 of 10 specimens within the interference screw group failed by tendon slippage at the screw-tendon-bone interface after a mean of 252 cycles (P = .221). Load-to-failure testing showed a mean load to failure of 218.8 ± 40 N and stiffness of 27.2 ± 7.2 N/mm for the intramedullary cortical button technique. For the interference screw, the mean load to failure was 212.1 ± 28.3 N (P = .625) and stiffness was 40.4 ± 13 N/mm (P = .056).

CONCLUSIONS

We could not find any major differences in load to failure when comparing the tested techniques for subpectoral biceps tenodesis. Intramedullary cortical button fixation showed no failure during cyclic testing. However, we found a 30% failure rate (3 of 10) for the interference screw fixation.

CLINICAL RELEVANCE

Intramedullary cortical button fixation provides an alternative technique for subpectoral biceps tenodesis with comparable and, during cyclic loading, even superior biomechanical properties to interference screw fixation.

Treatment for unstable distal clavicle fractures (Neer 2) with locking T-plate and additional PDS cerclage

PURPOSE

The purpose of the current study was to assess the clinical and radiological results after locking T-plate osteosynthesis with coracoclavicular augmentation of unstable and displaced distal clavicle fractures (Neer type 2).

METHODS

Thirty patients, treated between January 2007 and January 2010 were followed up after a median follow-up time of 12.2 months (range 4.7-37.2). The Constant and DASH scores were used to evaluate the clinical outcome, and anterior-posterior and 30° cephalic view radiographs were performed to assess the bony healing.

RESULTS

In all patients, the fracture healing was achieved within the first 10 weeks after surgery. All patients regained good or excellent shoulder function and returned to previous occupation and activity levels. The mean Constant and DASH scores were 92.3 points and 6.2 points, respectively. We did not observe any severe intra- or post-operative complication within the time of follow-up.

CONCLUSION

The presented technique turned out to be a reliable method providing good results without showing severe complications.

LEVEL OF EVIDENCE

Case series, Level IV.

The "bony Bankart bridge" technique for restoration of anterior shoulder stability

BACKGROUND

Bony deficiency of the anteroinferior glenoid rim can cause recurrent glenohumeral instability. To address this problem, bony reconstruction is recommended in patients with glenoid bone loss more than 20% to 25%. Recent advances in shoulder surgery techniques allow for the arthroscopic reconstruction of glenoid bone defects to restore stability.

HYPOTHESIS

The all-arthroscopic "bony Bankart bridge" (BBB) technique for bony anterior glenohumeral instability can restore shoulder stability and provide good shoulder function as well as improve patient satisfaction for these difficult-to-treat cases.

STUDY DESIGN

Case series; Level of evidence, 4.

METHODS

A consecutive series of 15 patients with bony anterior shoulder instability were treated using the arthroscopic BBB technique. All patients were assessed with the Disabilities of the Arm, Shoulder and Hand-short version (QuickDASH), American Shoulder and Elbow Surgeons (ASES) score, and Short Form-12 (SF-12) preoperatively and at final evaluation. In addition, a specific questionnaire evaluated patient satisfaction and possible complications.

RESULTS

Two women and 13 men were included in the study, with an average age of 44 years (range, 24-70 years). The average glenoid bone loss was 29% (range, 17%-49%). The mean duration of follow-up was 2.7 years (range, 2.0-4.4 years). At that time, the mean ASES score had improved from 81 (range, 50-98) to 98 (range, 88-100) (P = .133). Although this change was not statistically significant because of low patient numbers, the amount of improvement was almost 3 times the minimal clinically important difference of 6.4 points as reported in previous studies. The mean SF-12 (physical component) improved from 46.8 to 56.2 at final follow-up (P = .015). The mean QuickDASH score at final follow-up was 2.8 (range, 0-15.9), and the mean Single Assessment Numeric Evaluation score was 99 (range, 95-100). There were 14 (93%) stable shoulders and 1 (7%) failure with redislocation from a fall. Median patient satisfaction at final follow-up was 10 (range, 7-10) out of 10.

CONCLUSION

The arthroscopic BBB technique for anterior instability with glenoid rim fracture successfully restores shoulder stability with a high median patient satisfaction (10/10) and a very low complication rate.

Acromioclavicular joint separations

Acromioclavicular (AC) joint separations are common injuries of the shoulder girdle, especially in the young and active population. Typically the mechanism of this injury is a direct force against the lateral aspect of the adducted shoulder, the magnitude of which affects injury severity. While low-grade injuries are frequently managed successfully using non-surgical measures, high-grade injuries frequently warrant surgical intervention to minimize pain and maximize shoulder function. Factors such as duration of injury and activity level should also be taken into account in an effort to individualize each patient's treatment. A number of surgical techniques have been introduced to manage symptomatic, high-grade injuries. The purpose of this article is to review the important anatomy, biomechanical background, and clinical management of this entity.

Safe surgical technique: cement-augmented pedicle screw instrumentation and balloon-guided kyphoplasty for a lumbar burst fracture in a 97-year-old patient

Background

During the last few years, an increasing number of unstable thoracolumbar fractures, especially in elderly patients, has been treated by dorsal instrumentation combined with a balloon kyphoplasty. This combination provides additional stabilization to the anterior spinal column without any need for a second ventral approach.

Case presentation

We report the case of a 97-year-old male patient with a lumbar burst fracture (type A3-1.1 according to the AO Classification) who presented prolonged neurological deficits of the lower limbs - grade C according to the modified Frankel/ASIA score. After a posterior realignment of the fractured vertebra with an internal screw fixation and after an augmentation with non-absorbable cement in combination with a balloon kyphoplasty, the patient regained his mobility without any neurological restrictions.

Conclusion

Especially in older patients, the presented technique of PMMA-augmented pedicle screw instrumentation combined with balloon-assisted kyphoplasty could be an option to address unstable vertebral fractures in “a minor-invasive way”. The standard procedure of a two-step dorsoventral approach could be reduced to a one-step procedure.

Return to sports activity after tibial plateau fractures: 89 cases with minimum 24-month follow-up

BACKGROUND

Tibial plateau fractures requiring surgery are severe injuries. For professionals, amateurs, and recreational athletes, tibial plateau fractures might affect leisure and professional life.

HYPOTHESIS

Athletic patients will be affected in their sporting activity after a tibial plateau fracture. Despite a long rehabilitation time and program, physical activity will change to low-impact sports.

STUDY DESIGN

Case series; Level of evidence, 4.

METHODS

A total of 89 consecutive patients (age range, 14-76 years) were included in the study and were surveyed by a questionnaire. Inclusion criteria were surgical treatment of tibial plateau fractures between 2003 and 2009 with a minimum follow-up of 24 months. The sporting activity was determined at the time of injury, 1 year postoperatively, and at the time of the survey at an average of 52.8 months postoperatively. The clinical evaluation included the Lysholm score, the Tegner activity scale, the activity rating scale (ARS), and a visual analog scale (VAS) for pain perception. Fractures were classified and analyzed using both the Arbeitsgemeinschaft für Osteosynthesefragen (AO) and the Schatzker classifications.

RESULTS

At the time of injury, 88.8% of all patients were engaged in sports compared with 62.9% 1 year postoperatively and 73.0% at the time of the survey. Of the professional or competitive athletes (n = 11 at the time of injury), only 2 returned to competition at the time of the survey. The number of different sporting activities declined from 4.9 at the time of injury to 3.6 at the time of the survey (P < .001). The sports frequency and the activity duration per week, being 2.8 sessions and 4.5 hours at the time of injury, respectively, declined to 2.4 sessions and 3.8 hours (P < .001 and P = .007, respectively) at the time of the survey, respectively. The Lysholm score (98.7 points before accident) and the VAS for pain perception (0.2 before accident) illustrated significant declines to 76.6 points for the Lysholm score and 2.6 for the VAS (P < .001 and P < .001, respectively) at the time of the survey. The high-energy traumas, Schatzker IV to VI, had significant worse results in the clinical scores compared with the low-energy traumas (Lysholm, P < .001; Tegner, P = .027).

CONCLUSION

The majority of patients could not return to their previous level of activity, and for patients playing competitive sports, this injury can be a career ender. Overall, we noticed a postinjury shift toward activities with less impact. However, at the time of the survey, 73% of all patients were engaged in sports.