Tailoring the aluminum nanocrystal surface oxide for all-aluminum-based antenna-reactor plasmonic photocatalysts

Aluminum nanocrystals (AlNCs) are of increasing interest as sustainable, earth-abundant nanoparticles for visible wavelength plasmonics and as versatile nanoantennas for energy-efficient plasmonic photocatalysis. Here, we show that annealing AlNCs under various gases and thermal conditions induces substantial, systematic changes in their surface oxide, modifying crystalline phase, surface morphology, density, and defect type and concentration. Tailoring the surface oxide properties enables AlNCs to function as all-aluminum-based antenna-reactor plasmonic photocatalysts, with the modified surface oxides providing varying reactivities and selectivities for several chemical reactions.

Cool carriers: triplet diffusion dominates upconversion yield

Perovskites have gained popularity both as the active material in photovoltaics and as bulk triplet sensitizers for solid-state triplet-triplet annihilation upconversion (TTA-UC). Prior to widespread implementation into commercial photovoltaics, an in-depth understanding of the environmental influences on device performance is required. To this point, the temperature-dependent structure-function properties of TTA-UC within methylammonium formamidinium lead triiodide (MAFA)/rubrene UC devices are explored. A strong temperature dependence of the underlying UC dynamics is observed, where the maximum UC efficiency is achieved at 170 K, reflecting the competition between triplet diffusion length, diffusion rate, and triplet-triplet encounter events. A combination of spectroscopic and structural methods and theoretical modelling illustrates that despite the significantly increased carrier lifetime of the perovskite at low temperatures, the TTA-UC dynamics are not governed by the underlying sensitizer properties but rather limited by the underlying triplet diffusion.

Electrocatalytic activity and surface oxide reconstruction of bimetallic iron-cobalt nanocarbide electrocatalysts for the oxygen evolution reaction

For renewable energy technology to become ubiquitous, it is imperative to develop efficient oxygen evolution reaction (OER) electrocatalysts, which is challenging due to the kinetically and thermodynamically unfavorable OER mechanism. Transition metal carbides (TMCs) have recently been investigated as desirable OER pre-catalysts, but the ability to tune electrocatalytic performance of bimetallic catalysts and understand their transformation under electrochemical oxidation requires further study. In an effort to understand the tunable TMC material properties for enhancing electrocatalytic activity, we synthesized bimetallic FeCo nanocarbides with a complex mixture of FeCo carbide crystal phases. The synthesized FeCo nanocarbides were tuned by percent proportion Fe (i.e. % Fe), and analysis revealed a non-linear dependence of OER electrocatalytic activity on % Fe, with a minimum overpotential of 0.42 V (15-20% Fe) in alkaline conditions. In an effort to understand the effects of Fe composition on electrocatalytic performance of FeCo nanocarbides, we assessed the structural phase and electronic state of the carbides. Although we did not identify a single activity descriptor for tuning activity for FeCo nanocarbides, we found that surface reconstruction of the carbide surface to oxide during water oxidation plays a pivotal role in defining electrocatalytic activity over time. We observed that a rapid increase of the (FexCo1-x)2O4 phase on the carbide surface correlated with lower electrocatalytic activity (i.e. higher overpotential). We have demonstrated that the electrochemical performance of carbides under harsh alkaline conditions has the potential to be fine-tuned via Fe incorporation and with control, or suppression, of the growth of the oxide phase.

Influence of Al2O3 Overlayers on Intermolecular Interactions between Metal Oxide Bound Molecules

Intermolecular interactions on inorganic substrates can have a critical impact on the electrochemical and photophysical properties of the materials and subsequent performance in hybrid electronics. Critical to the intentional formation or inhibition of these processes is controlling interactions between molecules on a surface. In this report, we investigated the impact of surface loading and atomic-layer-deposited Al₂O₃ overlayers on the intermolecular interactions of a ZrO₂-bound anthracene derivative as probed by the photophysical properties of the interface. While surface loading density had no impact on the absorption spectra of the films, there was an increase in excimer features with surface loading as observed by both emission and transient absorption. The addition of ALD overlayers of Al₂O₃ resulted in a decrease in excimer formation, but the emission and transient absorption spectra were still dominated by excimer features. These results suggest that ALD may provide a post-surface loading means of influencing such intermolecular interactions.

Design and Synthesis of Kekulè and Non-Kekulè Diradicaloids via the Radical Periannulation Strategy: The Power of Seven Clar's Sextets

This work introduces an approach to uncoupling electrons via maximum utilization of localized aromatic units, i.e., the Clar's π-sextets. To illustrate the utility of this concept to the design of Kekulé diradicaloids, we have synthesized a tridecacyclic polyaromatic system where a gain of five Clar's sextets in the open-shell form overcomes electron pairing and leads to the emergence of a high degree of diradical character. According to unrestricted symmetry-broken UCAM-B3LYP calculations, the singlet diradical character in this core system is characterized by the y₀ value of 0.98 (y₀ = 0 for a closed-shell molecule, y₀ = 1 for pure diradical). The efficiency of the new design strategy was evaluated by comparing the Kekulé system with an isomeric non-Kekulé diradical of identical size, i.e., a system where the radical centers cannot couple via resonance. The calculated singlet-triplet gap, i.e., the ΔE_ST values, in both of these systems approaches zero: -0.3 kcal/mol for the Kekulé and +0.2 kcal/mol for the non-Kekulé diradicaloids. The target isomeric Kekulé and non-Kekulé systems were assembled using a sequence of radical periannulations, cross-coupling, and C-H activation. The diradicals are kinetically stabilized by six tert-butyl substituents and (triisopropylsilyl)acetylene groups. Both molecules are NMR-inactive but electron paramagnetic resonance (EPR)-active at room temperature. Cyclic voltammetry revealed quasi-reversible oxidation and reduction processes, consistent with the presence of two nearly degenerate partially occupied molecular orbitals. The experimentally measured ΔE_ST value of -0.14 kcal/mol confirms that K is, indeed, a nearly perfect singlet diradical.

A Single Source, Scalable Route for Direct Isolation of Earth-Abundant Nanometal Carbide Water-Splitting Electrocatalysts

Single-phase M_xCs (M = Fe, Co, and Ni) were prepared by solvothermal conversion of Prussian blue single source precursors. The single source precursor is prepared in water, and the conversion process is carried out in alkylamines at reaction temperatures above 200 °C. The reaction is scalable using a commercial source of Fe-PB. High-resolution transmission electron microscopy, X-ray photoelectron microscopy, and powder X-ray diffraction confirm that carbides have thin oxide termination but lack graphitic surfaces. Electrocatalytic activity reveals that Fe₃C and Co₂C are oxygen evolution reaction electrocatalysts, while Ni₃C is a bifunctional [OER and hydrogen evolution reaction (HER)] electrocatalyst.

Effective Mass for Holes in Paramagnetic, Plasmonic Cu5FeS4 Semiconductor Nanocrystals

The impact of a magneto-structural phase transition on the carrier effective mass in Cu5FeS4 plasmonic semiconductor nanocrystals was examined using Magnetic Circular Dichroism (MCD). Through MCD, the sample was confirmed as p-type from variable temperature studies from 1.8 - 75 K. Magnetic field dependent behavior is observed, showing an asymptotic behavior at high field with an m ∗ value 5.98 m ∗ ∕ m e at 10 T and 2.73 m ∗ ∕ m e at 2 T. Experimentally obtained results are holistically compared to SQUID magnetization data and DFT results, highlighting a dependency on vacancy driven polaronic coupling, magnetocrystalline anisotropy, and plasmon coupling of the magnetic field all contributing to an overall decrease in the hole mean free path dependent on the magnetic field applied to Cu5FeS4.

Controlled Synthesis and Exploration of CuxFeS4 Bornite Nanocrystals

Plasmonic semiconductor nanocrystals (NCs) are a new and exciting class of materials that enable higher control of their localized surface plasmon resonance (LSPR) than metallic counterparts. Additionally, earth-abundant and non-toxic materials such as copper iron sulfides are gaining interest as alternatives to heavy metal-based semiconductor materials. Colloidal bornite (Cu₅FeS₄) is an interesting but underexplored example of a heavy metal-free plasmonic semiconductor. This report details the hot-injection synthesis of bornite yielding NCs ranging from 2.7 to 6.1 nm in diameter with stoichiometric control of the copper and iron content. The absorbance spectra of bornite NCs with different Cu:Fe ratios change at different rates as the particles oxidize and develop LSPR in the near-infrared region. X-ray photoelectron spectroscopy results indicate that oxidation produces sulfates rather than metal oxides as well as a decrease in the iron content within the NCs. Additionally, increasing iron content leads to decreases in carrier density and effective mass of the carrier, as determined by the Drude model. This controlled synthesis, combined with a further understanding of the relationship between the particle structure and optical properties, will enable the continued development and application of these fascinating heavy metal-free plasmonic semiconductor nanoparticles.

Direct Measurement of the Selective Microwave-Induced Heating of Agglomerates of Dipolar Molecules: The Origin of and Parameters Controlling a Microwave Specific Superheating Effect

Agglomerates of polar molecules in nonpolar solvents are selectively heated by microwave radiation. The magnitude of the selective heating was directly measured by using the temperature dependence of the intensities of the Stokes and anti-Stokes bands in the Raman spectra of p-nitroanisole (pNA) and mesitylene. Under dynamic heating conditions, a large apparent temperature difference (ΔT) of over 100 °C was observed between the polar pNA solute and the nonpolar mesitylene solvent. This represents the first direct measurement of the selective microwave heating process. The magnitude of the selective microwave heating was affected by the properties of the agglomerated pNA. As the concentration of the pNA increases, the magnitude of the selective heating of the pNA was observed to decrease. This is explained by the tendency of the pNA dipoles to orient in an antiparallel fashion in the aggregates as measured by the Kirkwood g value, which decreased with increasing concentration. This effect reduces the net dipole moment of the agglomerates, which decreases the microwave absorption. After the radiation was terminated, the effective temperature of the dipolar molecules returned slowly to that of the medium. The slow heat transfer was modeled successfully by treating the solutions as a biphasic solvent/solute system. Based on modeling and the fact that the agglomerate can be heated above the boiling temperature of the solvent, an insulating layer of solvent vapor is suggested to form around the heated agglomerate, slowing convective heat transfer out of the agglomerate. This is an effect unique to microwave heating.

Microwave Synthesis and Magnetocaloric Effect in AlFe2B2

A promising magnetic refrigerant, AlFe₂B₂, has been prepared for the first time by microwave (MW) melting of a mixture of constituent elements. For comparison, samples of AlFe₂B₂ have been also prepared by arc-melting, traditionally used for the synthesis of this material, and by induction (RF) melting, which was used in the very first report on the synthesis of AlFe₂B₂. Although an excess of Al has to be used to suppress the formation of ferromagnetic FeB, the other byproduct, Al₁₃Fe₄, is easily removed by acid treatment, affording phase-pure samples of AlFe₂B₂. Our analysis indicates that the equimolar Fe/B ratio typically used for the preparation of AlFe₂B₂ might not provide the best synthetic conditions, as it does not account for the full reaction stoichiometry. Furthermore, we find that the initial Al/Fe loading ratio strongly influences magnetic properties of the sample, as judged by the range of ferromagnetic ordering temperatures (T_C = 280-293 K) observed in our experiments. The T_C value increases with the decrease in the Al/Fe ratio, due to the change in the Al/Fe antisite disorder. The use of the same Al/Fe loading ratio in the arc-, RF-, and MW-melting experiments leads to samples with a more consistent T_C of 286-287 K and similar values of the magnetocaloric effect.

Dielectric Properties for Nanocomposites Comparing Commercial and Synthetic Ni- and Fe3O4-Loaded Polystyrene

Nanomaterial-loaded thermoplastics are attractive for applications in adaptive printing methods, as the physical properties of the printed materials are dependent on the nanomaterial type and degree of dispersion. This study compares the dispersion and the impact on the dielectric properties of two common nanoparticles, nickel and iron oxide, loaded into polystyrene. Comparisons between commercial and synthetically prepared samples indicate that well-passivated synthetically prepared nanomaterials are dispersed and minimize the impact on the dielectric properties of the host polymer by limiting particle-particle contacts. Commercial samples were observed to phase-segregate, leading to the loss of the low-k performance of polystyrene. The change in the real and imaginary dielectric was systematically studied in two earth abundant nanoparticles at the concentration between 0 and 13 vol % (0-50 wt %). By varying the volume percentage of fillers in the matrix, it is shown that one can increase the magnetic properties of the materials while minimizing unwanted contributions to the dielectric constant and dielectric loss. The well-dispersed nanoparticle systems were successfully modeled through the Looyenga dielectric theory, thus giving one a predictive ability for the dielectric properties. The current experimental work coupled with modeling could facilitate future material choices and guide design rules for printable polymer composite systems.

Synthesis of Highly Uniform Nickel Multipods with Tunable Aspect Ratio by Microwave Power Control

As the importance of anisotropic nanostructures and the role of surfaces continues to rise in applications including catalysis, magneto-optics, and electromagnetic interference shielding, there is a need for efficient and economical synthesis routes for such nanostructures. The article describes the application of cycled microwave power for the rapid synthesis of highly branched pure-phase face-centered cubic crystalline nickel multipod nanostructures with >99% multipod population. By controlling the power delivery to the reaction mixture through cycling, superior control is achieved over the growth kinetics of the metallic nanostructures, allowing formation of multipods consisting of arms with different aspect ratios. The multipod structures are formed under ambient conditions in a simple reaction system composed of nickel acetylacetonate (Ni(acac)₂), oleylamine (OAm), and oleic acid (OAc) in a matter of minutes by selective heating at the (111) overgrowth corners on Ni nanoseeds. The selective heating at the corners leads to accelerated autocatalytic growth along the ⟨111⟩ direction through a "lightning rod" effect. The length is proprtional to the length and number of microwave (MW)-on cycles, whereas the core size is controlled by continuous MW power delivery. The roles of heating mode (cycling versus variable power versus convective heating) during synthesis of the materials is explored, allowing a mechanism into how cycled microwave energy may allow fast multipod evolution to be proposed.

A Gold Nanoparticle Bio-Optical Transponder to Dynamically Monitor Intracellular pH

A pH-sensitive bio-optical transponder (pH-BOT) capable of simultaneously reporting the timing of intracellular DNA cargo release from a gold nanoparticle (AuNP) and the evolving intracellular pH (pH i) during endosomal maturation is demonstrated. The pH-BOT is designed with a triple-dye-labeled duplex DNA appended to a 6.6 nm AuNP, utilizing pH-responsive fluorescein paired with DyLight405 as a surface energy transfer (SET) coupled dye pair to ratiometrically report the pH at and after cargo release. A non-SET-coupled dye, DyLight 700, is used to provide dynamic tracking throughout the experiment. The pH-BOT beacon of the cargo uptake, release, and processing was visualized using live-cell confocal fluorescent microscopy in Chinese hamster ovary cells, and it was observed that while maturation of endosomes carrying pH-BOT is slowed significantly, the pH-BOT is distributed throughout the endolysosomal system while remaining at pH ∼6. This observed decoupling of endosomal maturation from acidification lends support to those models that propose that pH alone is not sufficient to explain endosomal maturation and may enable greater insight into our understanding of the fundamental processes of biology.

Microwave Enhancement of Autocatalytic Growth of Nanometals

The desire for designing efficient synthetic methods that lead to industrially important nanomaterials has led a desire to more fully understand the mechanism of growth and how modern synthetic techniques can be employed. Microwave (MW) synthesis is one such technique that has attracted attention as a green, sustainable method. The reports of enhancement of formation rates and improved quality for MW driven reactions are intriguing, but the lack of understanding of the reaction mechanism and how coupling to the MW field leads to these observations is concerning. In this manuscript, the growth of a metal nanoparticles (NPs) in a microwave cavity is spectroscopically analyzed and compared with the classical autocatalytic method of NP growth to elucidate the underpinnings for the observed enhanced growth behavior for metal NPs prepared in a MW field. The study illustrates that microwave synthesis of nickel and gold NPs below saturation conditions follows the Finke-Watzky mechanism of nucleation and growth. The enhancement of the reaction arises from the size-dependent increase in MW absorption cross section for the metal NPs. For Ni, the presence of oxides is considered via theoretical computations and compared to dielectric measurements of isolated nickel NPs. The study definitively shows that MW growth can be modeled by an autocatalytic mechanism that directly leads to the observed enhanced rates and improved quality widely reported in the nanomaterial community when MW irradiation is employed.

Triangulating Nucleic Acid Conformations Using Multicolor Surface Energy Transfer

Optical ruler methods employing multiple fluorescent labels offer great potential for correlating distances among several sites, but are generally limited to interlabel distances under 10 nm and suffer from complications due to spectral overlap. Here we demonstrate a multicolor surface energy transfer (McSET) technique able to triangulate multiple points on a biopolymer, allowing for analysis of global structure in complex biomolecules. McSET couples the competitive energy transfer pathways of Förster Resonance Energy Transfer (FRET) with gold-nanoparticle mediated Surface Energy Transfer (SET) in order to correlate systematically labeled points on the structure at distances greater than 10 nm and with reduced spectral overlap. To demonstrate the McSET method, the structures of a linear B-DNA and a more complex folded RNA ribozyme were analyzed within the McSET mathematical framework. The improved multicolor optical ruler method takes advantage of the broad spectral range and distances achievable when using a gold nanoparticle as the lowest energy acceptor. The ability to report distance information simultaneously across multiple length scales, short-range (10-50 Å), mid-range (50-150 Å), and long-range (150-350 Å), distinguishes this approach from other multicolor energy transfer methods.

Cryopreservation of embryonic stem cell-derived multicellular neural aggregates labeled with micron-sized particles of iron oxide for magnetic resonance imaging

Magnetic resonance imaging (MRI) provides an effective approach to track labeled pluripotent stem cell (PSC)-derived neural progenitor cells (NPCs) for neurological disorder treatments after cell labeling with a contrast agent, such as an iron oxide derivative. Cryopreservation of pre-labeled neural cells, especially in three-dimensional (3D) structure, can provide a uniform cell population and preserve the stem cell niche for the subsequent applications. In this study, the effects of cryopreservation on PSC-derived multicellular NPC aggregates labeled with micron-sized particles of iron oxide (MPIO) were investigated. These NPC aggregates were labeled prior to cryopreservation because labeling thawed cells can be limited by inefficient intracellular uptake, variations in labeling efficiency, and increased culture time before use, minimizing their translation to clinical settings. The results indicated that intracellular MPIO incorporation was retained after cryopreservation (70-80% labeling efficiency), and MPIO labeling had little adverse effects on cell recovery, proliferation, cytotoxicity and neural lineage commitment post-cryopreservation. MRI analysis showed comparable detectability for the MPIO-labeled cells before and after cryopreservation indicated by T2 and T2* relaxation rates. Cryopreserving MPIO-labeled 3D multicellular NPC aggregates can be applied in in vivo cell tracking studies and lead to more rapid translation from preservation to clinical implementation.

Plasmid transfection in mammalian cells spatiotemporally tracked by a gold nanoparticle

Recent advances in cell transfection have suggested that delivery of a gene on a gold nanoparticle (AuNP) can enhance transfection efficiency. The mechanism of transfection is poorly understood, particularly when the gene is appended to a AuNP, as expression of the desired exogenous protein is dependent not only on the efficiency of the gene being taken into the cell but also on efficient endosomal escape and cellular processing of the nucleic acid. Design of a multicolor surface energy transfer (McSET) molecular beacon by independently dye labeling a linearized plasmid and short duplex DNA (sdDNA) appended to a AuNP allows spatiotemporal profiling of the transfection events, providing insight into package uptake, disassembly, and final plasmid expression. Delivery of the AuNP construct encapsulated in Lipofectamine2000 is monitored in Chinese hamster ovary cells using live-cell confocal microscopy. The McSET beacon signals the location and timing of the AuNP release and endosomal escape events for the plasmid and the sdDNA discretely, which are correlated with plasmid transcription by fluorescent protein expression within the cell. It is observed that delivery of the construct leads to endosomal release of the plasmid and sdDNA from the AuNP surface at different rates, prior to endosomal escape. Slow cytosolic diffusion of the nucleic acids is believed to be the limiting step for transfection, impacting the time-dependent expression of protein. The overall protein expression yield is enhanced when delivered on a AuNP, possibly due to better endosomal escape or lower degradation prior to endosomal escape.

Specific effects in microwave chemistry explored through reactor vessel design, theory, and spectroscopy

The interaction of microwave photons is directly measured using dielectric spectroscopy and heating rates for improved understanding of MW chemistry.

A gold nanoparticle pentapeptide: gene fusion to induce therapeutic gene expression in mesenchymal stem cells

Mesenchymal stem cells (MSC) have been identified as having great potential as autologous cell therapeutics to treat traumatic brain injury and spinal injury as well as neuronal and cardiac ischemic events. All future clinical applications of MSC cell therapies must allow the MSC to be harvested, transfected, and induced to express a desired protein or selection of proteins to have medical benefit. For the full potential of MSC cell therapy to be realized, it is desirable to systematically alter the protein expression of therapeutically beneficial biomolecules in harvested MSC cells with high fidelity in a single transfection event. We have developed a delivery platform on the basis of the use of a solid gold nanoparticle that has been surface modified to produce a fusion containing a zwitterionic, pentapeptide designed from Bax inhibiting peptide (Ku70) to enhance cellular uptake and a linearized expression vector to induce enhanced expression of brain-derived neurotrophic factor (BDNF) in rat-derived MSCs. Ku70 is observed to effect >80% transfection following a single treatment of femur bone marrow isolated rat MSCs with efficiencies for the delivery of a 6.6 kbp gene on either a Au nanoparticle (NP) or CdSe/ZnS quantum dot (QD). Gene expression is observed within 4 d by optical measurements, and secretion is observed within 10 d by Western Blot analysis. The combination of being able to selectively engineer the NP, to colocalize biological agents, and to enhance the stability of those agents has provided the strong impetus to utilize this novel class of materials to engineer primary MSCs.

Rationally manipulating aptamer binding affinities in a stem-loop molecular beacon

Single-stranded DNA sequences that are highly specific for a target ligand are called aptamers. While the incorporation of aptamer sequences into stem-loop molecular beacons has become an essential tool in optical biosensors, the design principles that determine the magnitude of binding affinity and its relationship to placement of the aptamer sequence in the stem-loop architecture are not well defined. By controlled placement of the aptamer along the loop region of the molecular beacon, it is observed that the binding affinity can be tuned over 4 orders of magnitude (1.3 nM – 203 μM) for the Huizenga and Szostak ATP DNA aptamer sequence. It is observed that the K_d is enhanced for the fully exposed sequence, with reduced binding affinity when the aptamer is part of the stem region of the beacon. Analysis of the ΔG values indicate a clear correlation between the aptamer hybridized length in the stem and its observed K_d. The use of a nanometal surface energy transfer probe method for monitoring ATP binding to the aptamer sequence allows the observation of negative cooperativity between the two ATP binding events. Maintenance of the high binding affinity of this ATP aptamer and the observation of two separate K_d’s for ATP binding indicate NSET as an effective, nonmanipulative, optical method for tracking biomolecular changes.

Ultra-sensitive chip-based photonic temperature sensor using ring resonator structures

Resistance thermometry provides a time-tested method for taking temperature measurements. However, fundamental limits to resistance-based approaches has produced considerable interest in developing photonic temperature sensors to leverage advances in frequency metrology and to achieve greater mechanical and environmental stability. Here we show that silicon-based optical ring resonator devices can resolve temperature differences of 1 mK using the traditional wavelength scanning methodology. An even lower noise floor of 80 μK for measuring temperature difference is achieved in the side-of-fringe, constant power mode measurement.

Fluorescent THF-based fructose analogue exhibits fructose-dependent uptake

Recent publications suggest that high dietary fructose might play a significant role in cancer metabolism and can exacerbate a number of aspects of metabolic syndrome. Addressing the role that fructose plays in human health is a controversial question and requires a detailed understanding of many factors including the mechanism of fructose transport into healthy and diseased cells. Fructose transport into cells is thought to be largely mediated by the passive hexose transporters Glut2 and Glut5. To date, no probes that can be selectively transported by one of these enzymes but not by the other have been identified. The data presented here indicate that, in MCF-7 cells, a 1-amino-2,5-anhydro-D-mannitol-based fluorescent NBDM probe is transported twice as efficiently as fructose and that this takes place with the aid of Glut5. Its Glut5 specificity and differential uptake in cancer cells and in normal cells suggest this NBDM probe as a potentially useful tool for cross-cell-line correlation of Glut5 transport activity.

Bimodal gold nanoparticle therapeutics for manipulating exogenous and endogenous protein levels in mammalian cells

A new advance in cell transfection protocol using a bimodal nanoparticle agent to selectively manipulate protein expression levels within mammalian cells is demonstrated. The nanoparticle based transfection approach functions by controlled release of gene regulatory elements from a 6 nm AuNP (gold nanoparticle) surface. The endosomal release of the regulatory elements from the nanoparticle surface results in endogenous protein knockdown simultaneously with exogenous protein expression for the first 48 h. The use of fluorescent proteins as the endogenous and exogenous signals for protein expression enables the efficiency of codelivery of siRNA (small interfering RNA) for GFP (green fluorescent protein) knockdown and a dsRed-express linearized plasmid for induction to be optically analyzed in CRL-2794, a human kidney cell line expressing an unstable green fluorescent protein. Delivery of the bimodal nanoparticle in cationic liposomes results in 20% GFP knockdown within 24 h of delivery and continues exhibiting knockdown for up to 48 h for the bimodal agent. Simultaneous dsRed expression is observed to initiate within the same time frame with expression levels reaching 34% after 25 days although cells have divided approximately 20 times, implying daughter cell transfection has occurred. Fluorescence cell sorting results in a stable colony, as demonstrated by Western blot analysis. The simultaneous delivery of siRNA and linearized plasmid DNA on the surface of a single nanocrystal provides a unique method for definitive genetic control within a single cell and leads to a very efficient cell transfection protocol.

Ligand-mediated modification of the electronic structure of CdSe quantum dots

X-ray absorption spectroscopy and ab initio modeling of the experimental spectra have been used to investigate the effects of surface passivation on the unoccupied electronic states of CdSe quantum dots (QDs). Significant differences are observed in the unoccupied electronic structure of the CdSe QDs, which are shown to arise from variations in specific ligand-surface bonding interactions.

Alloy formation at the tetrapod core/arm interface

The nature of the interfacial structure between the core and the arms of a tetrapod quantum dot (QD) formed during the heteroepitaxial growth of a ZnS arm onto a CdSe core is not well understood but can be analyzed through the use of high-frequency electron paramagnetic resonance (HF-EPR) spectroscopy. The spectroscopic resolution at high frequency allows the presence of unique crystal fields reflecting interfacial alloying to be analyzed by incorporating Mn(II) ions as a dopant into the QD to act as an intentional EPR active spectroscopic probe. In addition, the HF-EPR can spectroscopically observe the presence of ion vacancies that are anticipated to form at the heteroepitaxial interface to accommodate structural mismatch. The HF-EPR spectra for Mn(II) are extremely sensitive to perturbations of the microenvironment due to changes in the crystal field. The HF-EPR spectra of Mn(II) in a CdSe (core)/ZnS (arm) tetrapod exhibiting wurtzite symmetry for both core and interface of the tetrapod provide clear evidence of heteroalloying at the core-arm interface and formation of intrinsic dislocations at grain boundaries. The formation of the interfacial alloy and grain boundaries reflects short-range ion migration at the heteroepitaxial layer to reduce strain energy due to the 12% lattice mismatch between the wurtzite lattices of CdSe and ZnS.

Quantum phase transition from superparamagnetic to quantum superparamagnetic state in ultrasmall Cd(1-x)Cr(II)(x)Se quantum dots?

Despite a long history of success in formation of transition-metal-doped quantum dots (QDs), the origin of magnetism in diluted magnetic semiconductors (DMSs) is yet a controversial issue. Cr(II)-doped II-VI DMSs are half-metallic, resulting in high-temperature ferromagnetism. The magnetic properties reflect a strong p-d exchange interaction between the spin-up Cr(II) t(2g) level and the Se 4p. In this study, ultrasmall (~3.1 nm) Cr(II)-doped CdSe DMSQDs are shown to exhibit room-temperature ferromagnetism, as expected from theoretical arguments. Surprisingly, a low-temperature phase transition is observed at 20 K that is believed to reflect the onset of long-range ordering of the single-domain DMSQD.

Quantum Dot-Organic Oligomer Nanostructures: Electronic Excitation Migration and Optical Memory Design

Energy, in the form of an electronic excitation, can be directed within an inorganicorganic composite of semiconductor quantum dots and organic oligomers by manipulating the structural conformations of the organic component or the size of the inorganic component. Continuous-wave and time-resolved photoluminescence studies indicate that weak electromagnetic resonant coupling between discrete intra-chain and inter-chain excitations of the oligomer and quantum dot excitations can be used to produce a potentially useful optical display material. Thin film blends demonstrate a thermally-induced luminescence-detected chainmelting phenomenon that has the potential for writable optical memory.

Intracellular bimodal nanoparticles based on quantum dots for high-field MRI at 21.1 T

Multimodal, biocompatible contrast agents for high magnetic field applications represent a new class of nanomaterials with significant potential for tracking of fluorescence and MR in vitro and vivo. Optimized for high-field MR applications-including biomedical imaging at 21.1 T, the highest magnetic field available for MRI-these nanoparticles capitalize on the improved performance of chelated Dy(3+) with increasing magnetic field coupled to a noncytotoxic Indium Phosphide/Zinc Sulfide (InP/ZnS) quantum dot that provides fluorescence detection, MR responsiveness, and payload delivery. By surface modifying the quantum dot with a cell-penetrating peptide sequence coupled to an MR contrast agent, the bimodal nanomaterial functions as a self-transfecting high-field MR/optical contrast agent for nonspecific intracellular labeling. Fluorescent images confirm sequestration in perinuclear vesicles of labeled cells, with no apparent cytotoxicity. These techniques can be extended to impart cell selectivity or act as a delivery vehicle for genetic or pharmaceutical interventions.

Involvement of the LSPR spectral overlap for energy transfer between a dye and Au nanoparticle

Nanometal surface energy transfer (NSET) is a molecular ruler technique that has been utilized to optically probe long distances in biomolecular structures. We investigate the useful spectral range of donor dyes and the importance of overlap between the localized surface plasmon resonance (LSPR) and the donor photoluminescence (520-780 nm) and provide a comprehensive study of the R(0) values for the NSET processes from dyes to 2 nm Au NP (gold nanoparticle). The distance-dependent quenching results provide experimental evidence that the efficiency curve slope, R(0) value, and distance of quenching is best modeled as a surface-mediated NSET process analogous to the predictions of Persson-Lang and Chance-Prock-Silbey (CPS). The results show that the LSPR plays a very important role in the observed quenching of excited-state donors at the surface of the nanometal, and the correlation to the NSET model allows a compilation of the necessary biophysical constants for application within the toolbox of biophysics.

The detection of specific biomolecular interactions with micro-Hall magnetic sensors

The detection of reagent-free specific biomolecular interactions through sensing of nanoscopic magnetic labels provides one of the most promising routes to biosensing with solid-state devices. In particular, Hall sensors based on semiconductor heterostructures have shown exceptional magnetic moment sensitivity over a large dynamic field range suitable for magnetic biosensing using superparamagnetic labels. Here we demonstrate the capability of such micro-Hall sensors to detect specific molecular binding using biotin-streptavidin as a model system. We apply dip-pen nanolithography to selectively biotinylate the active areas of InAs micro-Hall devices with nanoscale precision. Specific binding of complementarily functionalized streptavidin-coated superparamagnetic beads to the Hall crosses occurs via molecular recognition, and magnetic detection of the assembled beads is achieved at room temperature using phase sensitive micro-Hall magnetometry. The experiment constitutes the first unambiguous demonstration of magnetic detection of specific biomolecular interactions with semiconductor micro-Hall sensors, and the selective molecular functionalization and resulting localized bead assembly demonstrate the possibility of multiplexed sensing of multiple target molecules using a single device with an array of micro-Hall sensors.

C-lysine conjugates: pH-controlled light-activated reagents for efficient double-stranded DNA cleavage with implications for cancer therapy

Double-stranded DNA cleavage of light-activated lysine conjugates is strongly enhanced at the slightly acidic pH (<7) suitable for selective targeting of cancer cells. This enhancement stems from the presence of two amino groups of different basicities. The first amino group plays an auxiliary role by enhancing solubility and affinity to DNA, whereas the second amino group, which is positioned next to the light-activated DNA cleaver, undergoes protonation at the desired pH threshold. This protonation results in two synergetic effects which account for the increased DNA-cleaving ability at the lower pH. First, lysine conjugates show tighter binding to DNA at the lower pH, which is consistent with the anticipated higher degree of interaction between two positively charged ammonium groups with the negatively charged phosphate backbone of DNA. Second, the unproductive pathway which quenches the excited state of the photocleaver through intramolecular electron transfer is eliminated once the donor amino group next to the chromophore is protonated. Experiments in the presence of traps for diffusing radicals show that reactive oxygen species do not contribute significantly to the mechanism of DNA cleavage at the lower pH, which is indicative of tighter binding to DNA under these conditions. This feature is valuable not only because many solid tumors are hypoxic but also because cleavage which does not depend on diffusing species is more localized and efficient. Sequence-selectivity experiments suggest combination of PET and base alkylation as the chemical basis for the observed DNA damage. The utility of these molecules for phototherapy of cancer is confirmed by the drastic increase in toxicity of five conjugates against cancer cell lines upon photoactivation.

Microcapsules with three orthogonal reactive sites

Polymeric microcapsules containing reactive sites on the shell surface and two orthogonally reactive polymers encapsulated within the interior are selectively labeled. The capsules provide three spatially separate and differentially reactive sites. Confocal fluorescence microscopy is used to characterize the distribution of labels. Polymers encapsulated are distributed homogeneously within the core and do not interact with the shell even when oppositely charged.

Tracking spatial disorder in an optical ruler by time-resolved NSET

For biomolecular applications, potential interactions between newly developed dye molecules and the biomolecule of interest can dramatically influence the accuracy of optical ruler techniques. By utilizing nanometal surface energy transfer (NSET), an optical technique is developed that allows the nature of interactions between dyes and a biomolecule, namely DNA, to be directly assessed. To demonstrate the method, interactions between well-known molecular dyes based on carboxyfluorescein (FAM, noninteracting) and Cy5 (known intercalator) with DNA is probed. The results demonstrate that FAM exhibits no interactions with the DNA backbone and is adequately represented as a solvent exposed dye, while the commonly used near-IR dye Cy5 exhibits two discrete interactions that depend on the site of appendage and the length of the linker arm. The exact population and nature of Cy5 interaction with the DNA indicates a 37% ratio of intercalation for the internal C(6), a 42% ratio for an internal C(3) spacer length, and no evidence of interaction for terminal labeling. The results allow quantitative assignment of the site occupation of donors to be analyzed providing a powerful set of information for use of dyes in FRET based optical ruler technologies without the need of single molecule methods or the assumption of an averaged site occupation for the donor.

Microwave induced in-situ active ion etching of growing InP nanocrystals

High quantum yield (47%) InP nanocrystals can be prepared without the need for post HF treatment by combining microwave methodologies with the presence of a fluorinated ionic liquid. Growing the InP nanocrystals in the presence of the ionic liquid 1-hexyl-3-methyl-imidazolium tetrafluoroborate (hmim BF4) allows in situ etching to be achieved. The optimization of the PL QY is achieved by balancing growth and etching rates in the reaction.