Biomechanical comparison of bone staple fixation methods with suture material for median sternotomy closure using 3D-printed bone models

AIM

To compare the biomechanical properties of three different sternal closure techniques in a 3D-printed bone model of a sternum from a 30-kg dog.

METHODS

Median sternotomy was performed on a total of 90 three-dimensional (3D) copies of a polycarbonate (PC) model of a sternum, generated from the CT images of the sternum of a 30-kg German Shepherd dog. Three different methods were used to repair the sternotomies: polydioxanone suture (group PDS, n = 30), stainless steel bone staples (group SS, n = 30), and nitinol bone staples (group NS, n = 30). Each repair method was tested by applying tensile force in one of three ways (longitudinally, laterally, or torsionally) resulting in a sample size of n = 10 for each repair method-loading combination. In all experiments, the loads at 1-mm and 2-mm gap formation, failure, and the displacement at the failure point were measured.

RESULTS

In lateral distraction and longitudinal shear tests, NS and SS staple repairs required application of significantly greater force than PDS across all displacement criteria (1 and 2 mm). NS exhibited significantly greater failure load than PDS. In torsion tests, NS required significantly greater application of force compared to SS or PDS at all displacement criteria (1 and 2 mm) and exhibited a greater failure load than PDS. In terms of displacement at failure point, PDS suture showed more displacement than SS or NS across all experiments (laterally, longitudinally, torsionally).

CONCLUSIONS

In this study, bone staples were mechanically superior to PDS suture in median sternotomy closure using 3D-printed bone model in terms of 1-mm, 2-mm displacement loads, and displacement at failure. NS had a higher failure load than PDS under lateral, longitudinal, and torsional distraction.

CLINICAL RELEVANCE

These study results imply that bone staples can be considered as an alternative surgical method for median sternotomy closure in dogs.

Fracture Liaison Service and Its Role in Secondary Fracture Prevention in Malaysia: A Scoping Review

Introduction

Fragility fractures, which occur after a low-trauma injury, increases with advancing age. Such fracture doubles the life-time risk of sustaining another fracture. This risk is highest in the immediate 18 months after the index fracture. However, most patients do not receive the appropriate risk assessment and intervention to reduce this risk. A coordinated model of care termed Fracture Liaison Service (FLS) has been reported to address this treatment gap.

Materials and methods

This scoping review aims to explore the potential role and delivery of FLS services in Malaysia. Scientific and non-scientific sources relevant to FLS were identified from electronic bibliographic databases, specialist journals and relevant websites. Findings were categorised into themes and presented narratively.

Results

FLS services remain concentrated in the Klang Valley. Even within FLS services, many do not have extensive coverage to risk assess all fracture patients. These services are multidisciplinary in nature where there are links between different departments, such as orthopaedics, osteoporosis expertise, bone densitometry, rehabilitation, falls services and primary care. FLS was able to increase the number of people undergoing fracture risk assessment and treatment. The importance of FLS was highlighted by local experts and stakeholders. Its implementation and delivery are supported by a number of national guidelines.

Conclusion

FLS is central to our national efforts to reduce the impending fragility fracture crisis in the coming years. Continued effort is needed to increase coverage within FLS services and across the country. Training, awareness of the problem, research, and policy change will support this endeavour.

Immune-Enhancing Effect of Sargassum horneri on Cyclophosphamide-Induced Immunosuppression in BALB/c Mice and Primary Cultured Splenocytes

Sargassum horneri (SH) is a seaweed that has several features that benefit health. In this study, we investigated the immune-enhancing effect of SH, focusing on the role of spleen-mediated immune functions. Chromatographic analysis of SH identified six types of monosaccharide contents, including mannose, rhamnose glucose, galactose xylose and fucose. SH increased cell proliferation of primary cultured naïve splenocytes treated with or without cyclophosphamide (CPA), an immunosuppression agent. SH also reversed the CPA-induced decrease in Th1 cytokines. In vivo investigation revealed that SH administration can increase the tissue weight of major immune organs, such as the spleen and thymus. A similar effect was observed in CPA-injected immunosuppressed BALB/c mice. SH treatment increased the weight of the spleen and thymus, blood immune cell count and Th1 cytokine expression. Additionally, the YAC-1-targeting activities of natural killer cells, which are important in innate immunity, were upregulated upon SH treatment. Overall, our study demonstrates the immune-enhancing effect of SH, suggesting its potential as a medicinal or therapeutic agent for pathologic conditions involving immunosuppression.

Characterization of the Interfacial Structures of Core/Shell CdSe/ZnS QDs

Core/shell quantum dots (QDs) have been extensively studied, yet their optical properties widely vary among studies. Such variation may arise from the variation in interfacial structures induced by the subtle difference in each synthetic procedure. Here, we studied the interfacial structures of CdSe/ZnS QDs using the time-of-flight medium energy ion-scattering spectroscopy (TOF-MEIS), which offers the radial elemental distributions as well as the overall elemental compositions of QDs. The TOF-MEIS spectra provided strong evidence for the existence of an alloyed layer at the interface between CdSe and ZnS in typical CdSe/ZnS QDs. On the basis of the emission and absorption spectra of QDs sampled during the synthesis, we conclude that such interfacial alloying is caused by the dissolution of CdSe seeds during the synthesis steps. Such a dissolution mechanism is further corroborated by the observation that the ligand environment of solvent (X or L type) leads to different shapes of interfaces.

Recovery from Cranial Nerve Symptoms after Flow Diversion without Coiling for Unruptured Very Large and Giant ICA Aneurysms

BACKGROUND AND PURPOSE

Cranial nerve symptoms, including visual impairment and ophthalmoplegia, are one of the most common presentations of very large and giant (≥15 mm) ICA aneurysms. In this study, we evaluated the treatment outcomes of flow diversion and conventional coiling in terms of recovery from cranial nerve symptoms and postoperative complications.

MATERIALS AND METHODS

Seventy-nine patients with unruptured ICA aneurysms of >15 mm who were treated with flow diversion or conventional coiling between December 2009 and December 2020 were retrospectively evaluated. We compared the radiologic and clinical outcomes, including recovery from cranial nerve symptoms, between the 2 groups.

RESULTS

Twenty-eight of 49 patients (57.1%) treated with flow diversion and 10 of 30 patients (33.3%) treated with conventional coiling initially presented with cranial nerve symptoms (P = .068). In the clinical follow-up, the symptom recovery rate was significantly higher in those treated with flow diversion (15 [50%] versus 3 [25%] with conventional coiling, P = .046). Multivariate logistic regression analysis demonstrated that flow diversion was significantly associated with symptom recovery (OR, 7.425; 95% CI, 1.091-50.546; P = .040). The overall postoperative complication rate was similar (flow diversion, 10 [20.4%]; conventional coiling, 6 [20.0%], P = .965), though fatal hemorrhagic complications occurred only in patients with intradurally located aneurysms treated with flow diversion (4 [8.2%] versus 0 [0.0%] with coiling, P = .108).

CONCLUSIONS

Flow diversion without coiling for very large and giant ICA aneurysms yielded a higher rate of recovery from cranial nerve symptoms, but it may be related to an increased hemorrhagic complication rate, especially for intradurally located aneurysms.

Immunoglobulin D Multiple Myeloma with a “Hidden” Lambda Light Chain

Introduction/Objective

In rare cases, the conventional immunofixation gel electrophoresis technique fails to detect the light chain of an M-protein. We report a case of immunoglobulin (Ig) D multiple myeloma with a hidden lambda (λ) light chain.

Methods/Case Report

Capillary electrophoresis (CE) (Sebia CAPILLARYS 2) was used to detect and quantify M- proteins in serum specimens. Immunosubtraction (IS) on the CAPILLARYS 2 systems was used to identify the classes of M-proteins. Conventional gel immunofixation electrophoresis (IFE) was performed, using monospecific antisera for IgD, IgE, kappa (κ) or λ in the Sebia HYDRASYS system, and IgG, IgA, IgM, κ or λ in the Helena SPIFE3000 system. Beta-mercaptoethanol (BME) with Fluidil were used as reduction agents.

Results (if a Case Study enter NA)

Results of serum CE showed two abnormal peaks in beta 2 and gamma regions, suspected to be positive for M-proteins. IS results showed subtraction for λ light chain only in both peaks, suggesting two monoclonal λ light chains. In contrary, no monoclonal λ light chain was detected in gamma region by IFE (Sebia). Epitope masking in the folded monoclonal protein was suspected to cause the “hidden λ light chain” and was further investigated by two laboratory approaches. IFE performed on the Helena SPIFE3000 system found two λ bands in beta 2 and gamma regions, which was consistent with the results from IS. The treatment of BME with Fluidil helped unmasking the hidden epitope and revealed the λ band in gamma region on IFE (Sebia).

Conclusion

The medical laboratories should be aware of the described scenario. The failure to detect light chains of certain intact M-proteins is most likely due to the structurally inaccessibility of light chains. It is recommended that treatment with reduction agents or use of an alternative methodology or IS might be helpful for investigating suspected heavy chain only cases, due to the limitation of conventional methodology.

The Variations of Insulin-like Growth Factor 1 Measured between Siemens Immulite, DiaSorin Liaison and IDS iSYS

Introduction/Objective

Insulin-like Growth Factor 1 (IGF-1) is a biomarker for the evaluation of growth hormone activity in the hypothalamic-pituitary axis. The current most common methodology for IGF-1 measurement is automated immunometric assays. In this study, we compared the IGF-1 on Siemens Immulite 2000, DiaSorin Liaison XL and IDS iSYS.

Methods/Case Report

Residual 30-110 serum specimens were randomly selected from routine hospital orders. IGF- 1 was measured on these three platforms and compared with Passing-Bablok regression. Bias was evaluated using the Bland-Altman method.

Results (if a Case Study enter NA)

Weighted Deming regression analysis showed approximately 80% and 56% positive bias on IDS iSYS and DiaSorin Liaison, compared with Siemens Immulite (iSYS=1.81*Immulite-117.65, r=0.91; Liaison=1.56*Immulite-4.58, r=0.98). There was approximately 8% positive bias on Liaison, compared with iSYS (Liaison=1.08*iSYS+0.56, r=0.99). The Passing-Bablok regression analysis revealed approximately 67% and 54% positive bias (iSYS=1.67*Immulite-75, r=0.91; Liaison=1.54*Immulite-3.44, r=0.91). Approximately 8% positive bias on Liaison was observed, compared with iSYS (Liaison=1.08*iSYS+5.65, r=0.99). The Bland-Altman plot showed the agreement between iSYS and Immulite IGF-1 was on average 129.6±123.3 ng/mL, 98.6±148.8 ng/mL between Liaison and Immulite and 37.0±46.5 ng/mL between Liaison and iSYS.

Conclusion

Immunoassays rely on the specificity of antibodies. There are wide variations between different immunoassay platforms for IGF-1 measurement. The standardization of IGF-1 assay is lack. It would be a challenge for clinicians to monitor IGF-1 or treat the patients with pituitary disorders, when switching to another platform. The potential impact of the variations in IGF-1 measurement between different immunoassay platforms should be aware.

Development of the Asia Pacific Consortium on Osteoporosis (APCO) Framework: clinical standards of care for the screening, diagnosis, and management of osteoporosis in the Asia-Pacific region

Guidelines for doctors managing osteoporosis in the Asia-Pacific region vary widely. We compared 18 guidelines for similarities and differences in five key areas. We then used a structured consensus process to develop clinical standards of care for the diagnosis and management of osteoporosis and for improving the quality of care.

PURPOSE

Minimum clinical standards for assessment and management of osteoporosis are needed in the Asia-Pacific (AP) region to inform clinical practice guidelines (CPGs) and to improve osteoporosis care. We present the framework of these clinical standards and describe its development.

METHODS

We conducted a structured comparative analysis of existing CPGs in the AP region using a "5IQ" model (identification, investigation, information, intervention, integration, and quality). One-hundred data elements were extracted from each guideline. We then employed a four-round Delphi consensus process to structure the framework, identify key components of guidance, and develop clinical care standards.

RESULTS

Eighteen guidelines were included. The 5IQ analysis demonstrated marked heterogeneity, notably in guidance on risk factors, the use of biochemical markers, self-care information for patients, indications for osteoporosis treatment, use of fracture risk assessment tools, and protocols for monitoring treatment. There was minimal guidance on long-term management plans or on strategies and systems for clinical quality improvement. Twenty-nine APCO members participated in the Delphi process, resulting in consensus on 16 clinical standards, with levels of attainment defined for those on identification and investigation of fragility fractures, vertebral fracture assessment, and inclusion of quality metrics in guidelines.

CONCLUSION

The 5IQ analysis confirmed previous anecdotal observations of marked heterogeneity of osteoporosis clinical guidelines in the AP region. The Framework provides practical, clear, and feasible recommendations for osteoporosis care and can be adapted for use in other such vastly diverse regions. Implementation of the standards is expected to significantly lessen the global burden of osteoporosis.

Blindness increases the risk for hip fracture and vertebral fracture but not the risk for distal radius fracture: a longitudinal follow-up study using a national sample cohort

The risks for hip fracture and vertebral fracture, but not the risk for distal radius fracture, were significantly higher in the blindness group than in the control group with a maximum 12-year follow-up.

PURPOSE

To evaluate the influence of visual impairment on the risk for osteoporotic fractures at common sites: hip, thoracic/lumbar vertebra, and distal radius.

METHODS

This longitudinal follow-up study used a database of a national sample cohort from 2002 to 2013 provided by the Korean National Health Insurance Service. Of a total of 1,125,691 subjects, 3918 patients with visual impairment and age ≥ 50 years were enrolled in a 1:4 ratio; 15,672 control participants were matched for age, sex, income, and region of residence. Stratified Cox proportional-hazards models were used to evaluate the crude and adjusted (for steroid medication, rheumatoid arthritis, depression, osteoporosis, diabetes mellitus, and stroke history) hazard ratios (HRs) for each fracture site. Fracture diagnoses were based on the ICD-10 codes: hip fracture (S720, S721, S722), vertebral fracture (S220, S320), and distal radius fracture (S525).

RESULTS

The HRs for hip and vertebral fracture were significantly higher in the blindness group (adjusted HR = 2.46, p < 0.001 for hip fracture; adjusted HR = 1.42, p = 0.020 for thoracic/lumbar vertebral fracture) than in the matched control group. However, the HR for distal radius fracture was not higher in the blindness group. The HRs for all three fracture sites were not significantly higher in the non-blindness visual impairment group after adjustment.

CONCLUSION

The risks for hip fracture and vertebral fracture were significantly higher in the blindness group. However, the risk for distal radius fracture was not related to visual impairment including blindness.

The Current and Future Challenges of Hip Fracture Management in Malaysia

By 2050, it is predicted that six million hip fractures will occur each year of which the majority will happen in Asia. Malaysia is not spared from this predicted rise and its rate of increase will be one of the highest in this region. Much of this is driven by our unprecedented growth in the number of older people. Characteristics of individuals with hip fractures in Malaysia mirror what has been reported in other countries. They will be older multimorbid people who were already at risk of falls and fractures. Outcomes were poor with at least a quarter do not survive beyond 12 months and in those that do survive have limitation in their mobility and activities of daily living. Reviewing how these fractures are managed and incorporating new models of care, such as orthogeriatric care, could address these poor outcomes. Experts have warned of the devastating impact of hip fracture in Malaysia and that prompt action is urgently required. Despite that, there remains no national agenda to highlight the need to improve musculoskeletal health in the country.

Lifetime and diffusion distance of singlet oxygen in air under everyday atmospheric conditions

Singlet oxygen is a toxic chemical but powerful oxidant, exploited in many chemical and biological applications. However, the lifetime of singlet oxygen in air under atmospheric conditions is yet to be known. This has limited safe usage of singlet oxygen in air, despite being a strong antimicrobial agent with the unique property of relaxing to breathable oxygen after serving its purpose. Here, we solve this long-standing problem by combining experimental and theoretical research efforts; we generate singlet oxygen using a photosensitizer at a local source and monitor the time-dependent extent of singlet oxygen reaction with probe molecules at a detector, precisely controlling the detector distance from the source. To explain our experimental results, we employ a theoretical model that fully accounts for singlet oxygen diffusion, radiative and nonradiative relaxations, and the bimolecular reaction with probe molecules at the detector. For all cases investigated, our model, with only two adjustable parameters, provides an excellent quantitative explanation of the experiment. From this analysis, we extract the lifetime of singlet oxygen in the air to be 2.80 s at 23 °C under 1 atm, during which time singlet oxygen diffuses about 0.992 cm. The correctness of this estimation is confirmed by a simple mean-first-passage time analysis of the maximum distance singlet oxygen can reach from the source. We also confirm the sterilization effects of singlet oxygen for distances up to 0.6-0.8 cm, depending on the bacteria strain in question, between the bacteria and the singlet oxygen source.

Secondary prevention of fragility fractures in Asia Pacific: an educational initiative

The Asia -Pacific Bone Academy (APBA) Fracture Liaison Service (FLS) Focus Group educational initiative has stimulated activity across the Asia -Pacific region with the intention of supporting widespread implementation of new FLS. In 2017, the APBA FLS Focus Group developed a suite of tools to support implementation of FLS across the Asia-Pacific region as a component of a multi-faceted educational initiative. This article puts this initiative into context with a narrative review describing the burden of fragility fractures in the region, the current secondary fracture prevention care gap and a summary of emerging best practice. The results of a survey to evaluate the impact of the APBA educational initiative is presented, in addition to commentary on recent activities intended to improve the care of individuals who sustain fragility fractures across the Asia -Pacific. A FLS Toolbox for Asia-Pacific was developed which included the following sections:1. The burden of fragility fractures in the Asia-Pacific region.2. A summary of evidence for FLS in the Asia-Pacific.3. A generic, fully referenced FLS business plan template.4. Potential cost savings accrued by each country, based on a country-specific FLS Benefits Calculator.5. How to start and expand FLS programmes in the Asia-Pacific context.6. A step-by-step guide to setting up FLS in countries in the Asia-Pacific region.7. Other practical tools to support FLS establishment.8. FLS online resources and publications.The FLS Toolbox was provided as a resource to support FLS workshops immediately following the 5th Scientific Meeting of the Asian Federation of Osteoporosis Societies (AFOS) held in Kuala Lumpur in October 2017. The FLS workshops addressed three key themes:• The FLS business case.• Planning the FLS patient pathway.• The role of the FLS coordinator in fragility fracture care management.A follow-up survey of 142 FLS workshop participants was conducted in August-September 2018. The survey included questions regarding how FLS were developed, funded, the scope of service provision and the support provided by the educational initiative. Almost one-third (30.3%) of FLS workshop participants completed the survey. Survey responses were reported for those who had established a FLS at the time the survey was conducted and, separately, for those who had not established a FLS. Findings for those who had established a FLS included:• 78.3% of respondents established a multidisciplinary team to develop the business case for their FLS.• 87.0% of respondents stated that a multidisciplinary team was established to design the patient pathway for their FLS.• 26.1% of respondents stated that their FLS has sustainable funding.• The primary source of funding for FLS was from public hospitals (83.3%) as compared with private hospitals (16.7%).Most hospitals that had not established a FLS at the time the survey was conducted were either in the process of setting-up a FLS (47%) or had plans in place to establish a FLS for which approval is being sought (29%). The primary barrier to establishing a new FLS was lack of sustainable funding. The APBA FLS Focus Group educational initiative has stimulated activity across the Asia-Pacific region with the intention of supporting widespread implementation of new FLS. A second edition of the FLS Toolbox is in development which is intended to complement ongoing efforts throughout the region to expedite widespread implementation of FLS.

Measurement of R(D) and R(D^{*}) with a Semileptonic Tagging Method

The experimental results on the ratios of branching fractions R(D)=B(B[over ¯]→Dτ^{-}ν[over ¯]_{τ})/B(B[over ¯]→Dℓ^{-}ν[over ¯]_{ℓ}) and R(D^{*})=B(B[over ¯]→D^{*}τ^{-}ν[over ¯]_{τ})/B(B[over ¯]→D^{*}ℓ^{-}ν[over ¯]_{ℓ}), where ℓ denotes an electron or a muon, show a long-standing discrepancy with the standard model predictions, and might hint at a violation of lepton flavor universality. We report a new simultaneous measurement of R(D) and R(D^{*}), based on a data sample containing 772×10^{6}  BB[over ¯] events recorded at the ϒ(4S) resonance with the Belle detector at the KEKB e^{+}e^{-} collider. In this analysis the tag-side B meson is reconstructed in a semileptonic decay mode and the signal-side τ is reconstructed in a purely leptonic decay. The measured values are R(D)=0.307±0.037±0.016 and R(D^{*})=0.283±0.018±0.014, where the first uncertainties are statistical and the second are systematic. These results are in agreement with the standard model predictions within 0.2, 1.1, and 0.8 standard deviations for R(D), R(D^{*}), and their combination, respectively. This work constitutes the most precise measurements of R(D) and R(D^{*}) performed to date as well as the first result for R(D) based on a semileptonic tagging method.

Correction to: Algorithm for the management of patients at low, high and very high risk of osteoporotic fractures

The article 'Algorithm for the management of patients at low, high and very high risk of osteoporotic fractures',written by J. A. Kanis, was originally published Online First without Open Access. After publication in volume [#], issue [#] and page [#-#], the author decided to opt for Open Choice and to make the article an Open Access publication.

Surgical treatment of nasolabial cysts in a single institute

OBJECTIVES

To analyse the results of treatment for nasolabial cysts according to whether an intraoral sublabial or endoscopic transnasal approach was used, and to determine the recent surgical trend in our hospital.

METHODS

Twenty-four patients with a histopathologically and radiologically confirmed nasolabial cyst between January 2010 and December 2017 were enrolled in this study.

RESULTS

Nasolabial cysts were predominant in females (91.7 per cent) and on the left side (54.2 per cent). Treatment involved an intraoral sublabial approach in 12 cases (48.0 per cent) and a transnasal endoscopic approach in 13 cases (52.0 per cent). In 13 cases (52.0 per cent) surgery was performed under local anaesthesia, while in 12 cases (48.0 per cent) it was conducted under general anaesthesia. The most common post-operative complications were numbness of the upper lip or teeth (n = 9, 36.0 per cent). Only one patient (4.0 per cent), who underwent a transnasal endoscopic approach, experienced a reoccurrence.

CONCLUSION

Surgical resection through an intraoral sublabial or transnasal endoscopic approach is the best treatment for a nasolabial cyst, showing very good results and a low recurrence rate. The recent surgical trend in our hospital is to treat nasolabial cysts using a transnasal endoscopic approach under local anaesthesia.

Algorithm for the management of patients at low, high and very high risk of osteoporotic fractures

Guidance is provided in an international setting on the assessment and specific treatment of postmenopausal women at low, high and very high risk of fragility fractures.

INTRODUCTION

The International Osteoporosis Foundation and European Society for Clinical and Economic Aspects of Osteoporosis and Osteoarthritis published guidance for the diagnosis and management of osteoporosis in 2019. This manuscript seeks to apply this in an international setting, taking additional account of further categorisation of increased risk of fracture, which may inform choice of therapeutic approach.

METHODS

Clinical perspective and updated literature search.

RESULTS

The following areas are reviewed: categorisation of fracture risk and general pharmacological management of osteoporosis.

CONCLUSIONS

A platform is provided on which specific guidelines can be developed for national use to characterise fracture risk and direct interventions.

Unique Luminescence of Hexagonal Dominant Colloidal Copper Indium Sulphide Quantum Dots in Dispersed Solutions

Luminescent hexagonal dominant copper indium sulphide (h-dominant CIS) quantum dots (QDs) by precursor-injection of mixed metal-dialkyldithiocarbamate precursors. Owing to the different reactivity of the precursors, this method allowed the CIS QDs to grow while retaining the crystallinity of the hexagonal nucleus. The photoluminescence (PL) spectra exhibited dual emission (600–700 nm red emission and 700–800 nm NIR emission) resulting from the combined contributions of the hexagonal (wurtzite) h-CIS and tetragonal (chalcopyrite) t-CIS QDs, i.e. the NIR and red emissions were due to the h-CIS QDs and coexisting t-CIS QDs (weight ratio of h-CIS/t-CIS ~ 10), respectively. The PL intensities of the h-CIS as well as t-CIS QDs were enhanced by post-synthetic heat treatment; the t-CIS QDs were particularly sensitive to the heat treatment. By separating h-CIS and t-CIS successfully, it was demonstrated that this phenomenon was not affected by size and composition but by the donor-acceptor pair states and defect concentration originating from their crystal structure. The h-dominant CIS QDs in this work provide a new technique to control the optical property of Cu-In-S ternary NCs.

Outcomes of treatment of mammary analogue secretory carcinoma of the parotid gland

Mammary analogue secretory carcinoma (MASC) of the salivary gland is a newly-described, rare, malignant tumour. Few patients present with MASC of the parotid gland, so the exact characteristics, outcomes of treatment, and prognosis are unknown. The aim of this study was to analyse the clinical features and outcomes of treatment of MASC of the parotid gland in patients being treated at a single hospital. Five patients with histopathologically-confirmed MASC of the parotid gland between January 2015 and August 2018 were retrospectively enrolled. In all cases preoperative fine-needle aspiration cytology had failed to provide an accurate diagnosis. All patients underwent a macroscopically complete oncological resection. Two patients had postoperative radiotherapy (RT). On immunohistochemical examination all tumours stained for S-100 and mammaglobin but not for DOG1. There were no regional recurrences or distant metastases in any of the patients at their last follow-up. We obtained good results for patients with MASC of the parotid gland with surgical treatment and postoperative RT.

Dental implant and fungus ball in the ethmoid sinus

Dental migration into the ethmoid sinus is extremely rare. Furthermore, it is very unusual that a displaced dental implant is associated with a concomitant fungus ball in the ethmoid sinus. Herein, we report an unusual case of the coexistence of a dental implant and fungus ball in the ethmoid sinus. It appears that this condition has not been reported previously.

C-band PAM-4 signal transmission using soft-output MLSE and LDPC code

We propose a DSP scheme with soft-output maximum likelihood sequence equalizer (sMLSE) and low-overhead (8.51%) low density parity check (LDPC) code for C-band PAM-4 transmission. In order to apply LDPC code in conjunction with MLSE, the conventional hard-output MLSE is modified to have a soft-output value by using the Max-log BCJR algorithm. The feasibility of this approach is experimentally investigated in a 56 Gb/s C-band PAM-4 system. In order to investigate the advantages of the proposed scheme, we compare the performance of the sMLSE-LDPC code to that of MLSE-RS code. Relatively, additional OSNR gain of 0.6 dB ~2.1 dB is achieved. The variation of the relative OSNR gain depends on the burst errors, which originate from the power fading effect. By using an interleaver that spreads burst errors in time, one can see that the relative OSNR gain is improved as 1.6 dB ~2.1 dB. Using the proposed scheme with the interleaver, one can see that the 30 km transmission of 56 Gb/s PAM-4 in the C-band was experimentally demonstrated.

A quantum dot-silica composite as an efficient spectral converter in a luminescent down-shifting layer of organic photovoltaic devices

The power conversion efficiency of organic photovoltaic (OPV) devices with a luminescent down-shifting layer was enhanced by 8.9% compared to pristine OPV devices.

Case reports of atrial and pericardial rupture from blunt cardiac trauma

Background

Blunt cardiac trauma is diagnosed in less than 10% of trauma patients and covers the range of severity from clinically insignificant myocardial contusions to lethal multi-chamber cardiac rupture. The most common mechanisms of injury include: motor vehicle collisions (MVC), pedestrians struck by motor vehicles and falls from significant heights. A severe complication from blunt cardiac trauma is cardiac chamber rupture with pericardial tear. It is an exceedingly rare diagnosis. A retrospective review identified only 0.002% of all trauma patients presented with this condition. Most patients with atrial rupture do not survive transport to the hospital and upon arrival diagnosis remains difficult.

Case presentation

We present two cases of atrial and pericardial rupture. The first case is a 33-year-old female involved in a MVC, who presented unresponsive, hypotensive and tachycardic. A left sided hemothorax was diagnosed and a chest tube placed with 1200 mL of bloody output. The patient was taken to the OR emergently. Intraoperatively, a laceration in the right pericardium and a 3 cm defect in the anterior, right atrium were identified. Despite measures to control hemorrhage and resuscitate the patient, the patient did not survive.

The second case is a 58-year-old male involved in a high-speed MVC. Similar to the first case, the patient presented unresponsive, hypotensive and tachycardic with a left sided hemothorax. A chest tube was placed with 900 mL of bloody output. Based on the output and ongoing resuscitation requirements, the patient was taken to the OR. Intraoperatively, a 15 cm anterior pericardial laceration was identified. Through the defect, there was brisk bleeding from a 1 cm laceration on the left atrial appendage. The injury was debrided and repaired using a running 3–0 polypropylene suture over a Satinsky clamp. The patient eventually recovered and was discharged home.

Conclusions

We present two cases of uncontained atrial and pericardial rupture from blunt cardiac trauma. Contained ruptures with an intact pericardium present as a cardiac tamponade while uncontained ruptures present with hemomediastinum or hemothorax. A high degree of suspicion is required to rapidly diagnose and perform the cardiorrhaphy to offer the best chance at survival.

Germinated Waxy Black Rice Ameliorates Hyperglycemia and Dyslipidemia in Streptozotocin-Induced Diabetic Rats

This study aimed to examine the anti-diabetic effect of germinated waxy black rice (GWBR) using streptozotocin (STZ)-induced diabetic rats. In the diabetic rats, GWBR supplementation for 8 weeks reduced plasma blood glucose concentrations, improved glucose clearance and prevented diabetes-induced weight loss. Rats with STZ-induced diabetes who received GWBR supplementation exhibited decreased expression of sodium-dependent glucose transporter 1 (SGLT1) and glucose transporter (GLUT) 2 genes and proteins in the small intestine via decreases in hepatocyte nuclear factor (HNF)-1α, HNF-1β, and HNF-4α, transcriptional factors that are involved in the regulation of SGLT1 and GLUT2, compared with the rats with STZ-induced diabetes that did not receive GWBR supplements. GWBR supplementation also enhanced the expression of GLUT4 and the genes and proteins involved in GLUT4 translocation, such as insulin receptor (IR) and insulin receptor substrate 1 (IRS1), and increased the phosphorylation of phosphoinositide 3-kinase (PI3K) and protein kinase B (PKB, Akt) proteins in skeletal muscle. GWBR further increased glycogen synthase (GS) 1 by decreasing glycogen synthase kinase (GSK)-3β in skeletal muscle. Interestingly, GWBR recovered STZ-impaired pancreatic β-cells, resulting in increased insulin synthesis and secretion. In addition, GWBR reduced serum triglyceride, total cholesterol, low-density lipoprotein cholesterol, aspartate transferase and alanine transferase concentrations and increased high-density lipoprotein cholesterol concentrations. Taken together, these findings suggest that GWBR could be a candidate for improving the diabetic condition by regulating glucose uptake in the intestine and muscle and regulating the secretion of insulin from the pancreas.

Effect of Rice Bran and Wheat Fibers on Microbiological and Physicochemical Properties of Fermented Sausages during Ripening and Storage

This study investigated the effect of rice bran fiber (RBF) and wheat fibers (WF) on microbiological and physicochemical properties of fermented sausages during ripening and storage. The experimental design included three treatments: Control, no addition; RBF, 1.5%; and WF, 1.5%. During the ripening periods, the addition of dietary fibers rapidly decreased pH and maintained high water activity values of fermented sausages (p<0.05). Lactic acid bacteria were more prevalent in fermented sausages with rice bran fiber than control and sausages with added wheat fiber. During cold storage, lower pH was observed in sausages with dietary fibers (p<0.05), and the water activity and color values were reduced as the storage period lengthened. Fermented sausages containing dietary fibers were higher in lactic acid bacteria counts, volatile basic nitrogen and 2-thiobarbituric acid reactive substance values compared to the control (p<0.05). The results indicate that, the addition of dietary fibers in the fermented sausages promotes the growth of lactic bacteria and fermentation, and suggests that development of functional fermented sausages is possible.

Standardisation of defined approaches for skin sensitisation testing to support regulatory use and international adoption: position of the International Cooperation on Alternative Test Methods

Skin sensitisation is the regulatory endpoint that has been at the centre of concerted efforts to replace animal testing in recent years, as demonstrated by the Organisation for Economic Co-operation and Development (OECD) adoption of five non-animal methods addressing mechanisms under the first three key events of the skin sensitisation adverse outcome pathway. Nevertheless, the currently adopted methods, when used in isolation, are not sufficient to fulfil regulatory requirements on the skin sensitisation potential and potency of chemicals comparable to that provided by the regulatory animal tests. For this reason, a number of defined approaches integrating data from these methods with other relevant information have been proposed and documented by the OECD. With the aim to further enhance regulatory consideration and adoption of defined approaches, the European Union Reference Laboratory for Alternatives to Animal testing in collaboration with the International Cooperation on Alternative Test Methods hosted, on 4-5 October 2016, a workshop on the international regulatory applicability and acceptance of alternative non-animal approaches, i.e., defined approaches, to skin sensitisation assessment of chemicals used in a variety of sectors. The workshop convened representatives from more than 20 regulatory authorities from the European Union, United States, Canada, Japan, South Korea, Brazil and China. There was a general consensus among the workshop participants that to maximise global regulatory acceptance of data generated with defined approaches, international harmonisation and standardisation are needed. Potential assessment criteria were defined for a systematic evaluation of existing defined approaches that would facilitate their translation into international standards, e.g., into a performance-based Test Guideline. Informed by the discussions at the workshop, the ICATM members propose practical ways to further promote the regulatory use and facilitate adoption of defined approaches for skin sensitisation assessments.

Synthesis of pH stable, blue light-emitting diode-excited, fluorescent silica nanoparticles and effects on cell behavior

To date, delivery of light-emitting diode (LED)-activated compounds to cells and tissue remains a challenge. Silica-based materials possess good biocompatibility and have advantages of control of size and shape. Fluorescent silica nanoparticles (NPs) have been synthesized and used for applications such as cell tracking and tumor identification. Here, we report the synthesis and optimization of fluorescent silica NPs, which incorporate a naphthalimide dye with triethoxysilanes that are excited by the blue LED wavelength (LEDex NPs). The NPs can be imaged in the 420-470 nm wavelength, demonstrate a high quantum yield, are stable in a range of pH, and are taken into the cells. Therefore, these NPs represent a novel imaging technology for biomedical applications.

Altering surface fluctuations by blending tethered and untethered chains

"Partially tethering" a thin film of a polymer melt by covalently attaching to the substrate a fraction of the chains in an unentangled melt dramatically increases the relaxation time of the surface height fluctuations. This phenomenon is observed even when the film thickness, h, is 20 times the unperturbed chain radius, R_g,tethered, of the tethered chains, indicating that partial tethering is more influential than any physical attraction with the substrate. Furthermore, a partially tethered layer of a low average molecular weight of 5k showed much slower surface fluctuations than did a reference layer of pure untethered chains of much greater molecular weight (48k), so the partial tethering effect is stronger than the effects of entanglement and increase in glass transition temperature, T_g, with molecular weight. Partial tethering offers a means of tailoring these fluctuations which influence wetting, adhesion, and tribology of the surface.

Surface Coating of Gradient Alloy Quantum Dots with Oxide Layer in White-Light-Emitting Diodes for Display Backlights

Recently, quantum dots (QDs) have been successfully developed as efficient color converters for light-emitting diodes (LEDs) display due to excellent optical properties of QDs. Herein, we demonstrate a new approach to form metal oxide layers (or metal oxide coating) on the exterior surface of gradient alloy QDs (the most advanced chemical architecture QDs developed thus far wherein the lattice parameter from the core to shell is changing in a gradient fashion) in order to improve the photochemical stability and photoluminescence efficiency. The resulting CdO-treated QDs are incorporated into polymer matrix films to fabricate a backlight unit as a part of display panel wherein CdO-treated gradient alloy QDs are utilized as color converters upon the blue-LED excitation. The fabricated 9.7 in. iPad 2 tablet liquid crystal display panel exhibited an excellent uniformity in terms of CIE chromaticity, luminance, and bright variation and superb durability test results (maintenance of ca. 110% brightness compared to initial value even after 3 weeks of operation).

Meat Quality and Storage Characteristics of Pork Loin Marinated in Grape Pomace

This study investigated the meat quality and storage characteristics of pork loin marinated in grape pomace powder during different storage periods. The experimental design included six treatments : pork loin containing only 100% water (Control, C); pork loin containing a combination of 20% grape pomace and 80% water (T1); pork loin containing a combination of 40% grape pomace and 60% water (T2); pork loin containing a combination of 0.5% grape pomace powder and 95.5% water (T3); pork loin containing a combination of 1.0% grape pomace powder and 99.0% water (T4); and pork loin containing a combination of 2.0% grape pomace powder and 98.0% water (T5). The pork loins aged by grape pomace and grape pomace powder showed decreased crude protein, crude fat, crude ash, pH, redness, and yellowness values; however, their moisture, lightness, and shear force increased significantly. During cold storage, marination with grape pomace and grape pomace powder reduced the 2-thiobarbituric acid value, volatile basic nitrogen value, and total microbial count in pork loin. Thus, marination with grape pomace and grape pomace powder improved the meat quality and storage characteristics, and could be used to improve storage stability of pork loin.

Correlation of insulin-like growth factor 1 and osteoarthritic cartilage degradation: a spontaneous osteoarthritis in guinea-pig

OBJECTIVE

The pathogenesis of osteoarthritis centers on the imbalance between catabolic and anabolic processes in cartilage metabolism. Insulin growth factor 1 (IGF-1) has been shown to have anabolic effects in cartilage in vitro. This study aim to determine whether IGF-1 on cartilage is associated with loss of chondrocyte and extracellular matrix breakdown using the Hartley guinea pig model.

MATERIALS AND METHODS

Cartilage from the medial and lateral tibial plateau of 6-month and 12-month old Hartley guinea pigs were used for this study. Histological analysis was performed with hematoxylin-eosin (HE) and toluidine blue staining. Safranin-O staining was used to quantify proteoglycan (PG) loss and the extent of cartilage damage by Modified Mankin score. Distribution of IGF-1 was demonstrated with in situ hybridization techniques. IGF-1 mRNA levels were assessed using Real-time PCR.

RESULTS

Histological loss of chondrocytes, and cartilage matrix and decreased IGF-1 distribution were demonstrated in a temporal and spatial manner. Compared to the 6-month old samples, the 12-month specimens had significantly cartilage degeneration and less cartilage matrix and PGs staining. Decreased level of IGF-1 was also observed in the 12-month samples. These observations were more pronounced in the medial tibial plateau when compared to the lateral plateau.

CONCLUSIONS

The decreased level of IGF-1 may play a critical role for maintaining the balance between catabolic and anabolic processes in cartilage metabolism during the development of osteoarthritis. Thus, the increase of IGF-1 may be applicable to developing OA therapy.

Genetic diversity and population structure analysis in Perilla frutescens from Northern areas of China based on simple sequence repeats

In this study, 21 simple sequence repeat (SSR) markers were used to evaluate the genetic diversity and population structure among 77 Perilla accessions from high-latitude and middle-latitude areas of China. Ninety-five alleles were identified with an average of 4.52 alleles per locus. The average polymorphic information content (PIC) and genetic diversity values were 0.346 and 0.372, respectively. The level of genetic diversity and PIC value for cultivated accessions of Perilla frutescens var. frutescens from middle-latitude areas were higher than accessions from high-latitude areas. Based on the dendrogram of unweighted pair group method with arithmetic mean (UPGMA), all accessions were classified into four major groups with a genetic similarity of 46%. All accessions of the cultivated var. frutescens were discriminated from the cultivated P. frutescens var. crispa. Furthermore, most accessions of the cultivated var. frutescens collected in high-latitude and middle-latitude areas were distinguished depending on their geographical location. However, the geographical locations of several accessions of the cultivated var. frutescens have no relation with their positions in the UPGMA dendrogram and population structure. This result implies that the diffusion of accessions of the cultivated Perilla crop in the northern areas of China might be through multiple routes. On the population structure analysis, 77 Perilla accessions were divided into Group I, Group II, and an admixed group based on a membership probability threshold of 0.8. Finally, the findings in this study can provide useful theoretical knowledge for further study on the population structure and genetic diversity of Perilla and benefit for Perilla crop breeding and germplasm conservation.

Cigarette smoke impaired maturation of ovarian follicles and normal growth of uterus inner wall of female wild-type and hypertensive rats

Cigarette smoke (CS) is well known to be very harmful to human body functions such as fertility, reproduction, and development. CS is considered to more affect patients with hypertension (HT). To estimate the effect of CS associated with female rat's fertility, we examined the histopathological characteristics of the uterus and ovary which were obtained from the female rats exposed to smoke of the standard cigarette (3R4F) for 4 weeks (10h a week) according to the OECD guidelines. The female wild-type Wistar Kyoto (WK) rats (WTR) and spontaneously hypertensive WK rats (SHR) were used to compare the effect of CS on healthy and hypertensive rats. After CS exposure, we manufactured tissue slides from uterine and ovarian samples and evaluated the maturation of follicles of ovary and cell proliferation in the uterus by H&E staining and immunohistochemistry (IHC). In IHC analysis on ovarian tissues, the expression of proliferating cell nuclear antigen (PCNA) and the number of follicles were decreased by CS exposure. On the contrary, PCNA expression and cell proliferation in the uterine inner layers were increased by CS exposure. The protein expression of C/EBP homologous protein (CHOP), an endoplasmic reticulum (ER)-stress marker, and BAX, a pro-apoptotic protein, was decreased by CS exposure. This phenomenon was more exacerbated in SHR rats than in WTR rats. Taken together, acute exposure to CS induced the decreased maturation of ovarian follicles and abnormal over-growth of uterine inner wall, leading to a harmful effect on female rat's normal function. In addition, this harmful effect of CS may be displayed more seriously in rats with HT.

Prevalence of Traumatic Findings on Routine MRI in a Large Cohort of Professional Fighters

BACKGROUND AND PURPOSE

Previous studies investigating MR imaging abnormalities among fighters have had small sample sizes. This investigation assessed a large number of fighters using the same conventional sequences on the same scanner.

MATERIALS AND METHODS

Conventional 3T MR imaging was used to assess 499 fighters (boxers, mixed martial artists, and martial artists) and 62 controls for nonspecific WM changes, cerebral microhemorrhage, cavum septum pellucidum, and cavum vergae. The lengths of the cavum septum pellucidum and cavum vergae and the ratio of cavum septum pellucidum to the septum pellucidum lengths were assessed.

RESULTS

The prevalence of nonspecific WM changes was similar between groups. Fighters had a prevalence of cerebral microhemorrhage (4.2% versus 0% for controls, P = .152). Fighters had a higher prevalence of cavum septum pellucidum versus controls (53.1% versus 17.7%, P < .001) and cavum vergae versus controls (14.4% versus 0%, P < .001). The lengths of the cavum septum pellucidum plus the cavum vergae (P < .001), cavum septum pellucidum (P = .025), and cavum septum pellucidum to the septum pellucidum length ratio (P = .009) were higher in fighters than in controls. The number of fights slightly correlated with cavum septum pellucidum plus cavum vergae length (R = 0.306, P < .001) and cavum septum pellucidum length (R = 0.278, P < .001). When fighters were subdivided into boxers, mixed martial artists, and martial artists, results were similar to those in the whole-group analysis.

CONCLUSIONS

This study assessed MR imaging findings in a large cohort demonstrating a significantly increased prevalence of cavum septum pellucidum among fighters. Although cerebral microhemorrhages were higher in fighters than in controls, this finding was not statistically significant, possibly partially due to underpowering of the study.

Effect of Calcium Lactate on Physico-Chemical Characteristics of Shank Bone Extract

This study was conducted to develop calcium-fortified shank bone extract (SBE) and to determine the effect of adding calcium lactate on physico-chemical characteristics of SBE during cold storage. The following five experiment groups were used: Control (0%, no addition), T1 (0.05% calcium lactate), T2 (0.1% calcium lactate), T3 (0.5% calcium lactate), and T4 (1% calcium lactate). When the concentration of calcium lactate added to the SBE was increased, the pH, redness, and yellowness values were significantly reduced, whereas the salinity, sugar content, and turbidity of SBE were significantly increased. Sensory parameters such as aroma, flavor, and overall acceptability in the control, T1, and T2 had similar scores. The TBARS values of SBE was significantly increased when 1% of calcium lactate was added, and the VBN values of SBE with calcium lactate at day 7 were higher than that of control (p<0.05). However, the addition of calcium lactate showed an inhibition effect on the growth of total microbial counts in SBE until 4 d of storage. The calcium content of SBE was increased by the addition of calcium lactate in a dose-dependently manner. The proper addition level of calcium lactate in the SBE was determined to be 0.1%.

Highly efficient Blue-Emitting CdSe-derived Core/Shell Gradient Alloy Quantum Dots with Improved Photoluminescent Quantum Yield and Enhanced Photostability

Highly efficient blue-emitting CdSe-derived core/shell gradient alloy quantum dots (CSGA QDs) with photoluminescence quantum yield (PL QY) of ca. 90% have been synthesized through a facile "one-pot" approach. CdSe nuclei are initially formed as core and gradient alloy shells such as CdSe_xS_1-x/ZnSe_yS_1-y simultaneously encapsulate the preformed CdSe core in an energy-gradient fashion eventually followed by coating with ZnS shells due to the faster precursor reaction kinetics of Cd and Se compared to analog of Zn and S. During the formation of core/shell structure, red-shifting of absorption/emission peaks followed by blue-shifting of analogues were observed due to the intradiffusion of sulfur anion to CdSe luminescent center. In this gradient architecture, interfacial lattice strain can be effectively alleviated, and thus high PL QY (ca. 90%) and enhanced photochemical stability can be achieved. The synthesized blue-emitting gradient alloy QDs with superior optical properties tunable in the range of 450-490 nm can be used for highly efficient blue-emitters and potentially applicable for the fabrication of white-light LEDs.

Gas-Phase Conformations and N-Glycosidic Bond Stabilities of Sodium Cationized 2'-Deoxyguanosine and Guanosine: Sodium Cations Preferentially Bind to the Guanine Residue

2'-Deoxyguanosine (dGuo) and guanosine (Guo) are fundamental building blocks of DNA and RNA nucleic acids. In order to understand the effects of sodium cationization on the gas-phase conformations and stabilities of dGuo and Guo, infrared multiple photon dissociation (IRMPD) action spectroscopy experiments and complementary electronic structure calculations are performed. The measured IRMPD spectra of [dGuo+Na]⁺ and [Guo+Na]⁺ are compared to calculated IR spectra predicted for the stable low-energy structures computed for these species to determine the most favorable sodium cation binding sites, identify the structures populated in the experiments, and elucidate the influence of the 2'-hydroxyl substituent on the structures and IRMPD spectral features. These results are compared with those from a previous IRMPD study of the protonated guanine nucleosides to elucidate the differences between sodium cationization and protonation on structure. Energy-resolved collision-induced dissociation (ER-CID) experiments and survival yield analyses of protonated and sodium cationized dGuo and Guo are performed to compare the effects of these cations toward activating the N-glycosidic bonds of these nucleosides. For both [dGuo+Na]⁺ and [Guo+Na]⁺, the gas-phase structures populated in the experiments are found to involve bidentate binding of the sodium cation to the O6 and N7 atoms of guanine, forming a 5-membered chelation ring, with guanine found in both anti and syn orientations and C2'-endo (²T₃ or ³T₂) puckering of the sugar. The ER-CID results, IRMPD yields and the computed C1'-N9 bond lengths indicate that sodium cationization activates the N-glycosidic bond less effectively than protonation for both dGuo and Guo. The 2'-hydroxyl substituent of Guo is found to impact the preferred structures very little except that it enables a 2'OH···3'OH hydrogen bond to be formed, and stabilizes the N-glycosidic bond relative to that of dGuo in both the sodium cationized and protonated complexes.

Sclerosing mucoepidermoid carcinoma of the sublingual gland

INTRODUCTION

Sclerosing mucoepidermoid carcinoma of the salivary gland is a rare subtype of mucoepidermoid carcinoma. The most common site of sclerosing mucoepidermoid carcinoma of the salivary glands is the parotid gland, followed by the submandibular gland, and the minor salivary glands.

OBSERVATION

Here we report the first case of sclerosing mucoepidermoid carcinoma of the sublingual gland.

DISCUSSION

Clinicians should consider sclerosing mucoepidermoid carcinoma in the differential diagnosis of salivary gland neoplasm. Surgical excision with clear margins seems to be a sufficient initial treatment option for sclerosing mucoepidermoid carcinoma of the salivary gland.

Rickettsia parkeri and "Candidatus Rickettsia andeanae" in Questing Amblyomma maculatum (Acari: Ixodidae) From Mississippi

Amblyomma maculatum Koch (Acari: Ixodidae), the primary vector for Rickettsia parkeri, may also be infected with a rickettsia of unknown pathogenicity, "Candidatus Rickettsia andeanae." Infection rates with these rickettsiae vary geographically, and coinfected ticks have been reported. In this study, infection rates of R. parkeri and "Ca. R. andeanae" were evaluated, and rickettsial DNA levels quantified, in 335 questing adult A. maculatum collected in 2013 (n = 95), 2014 (n = 139), and 2015 (n = 101) from Oktibbeha County, MS. Overall infection rates of R. parkeri and "Ca. R. andeanae" were 28.7% and 9.3%, respectively, with three additional A. maculatum (0.9%) coinfected. While R. parkeri-infected ticks were detected all three years (34.7% in 2013; 13.7% in 2014; 43.6% in 2015), "Ca. R. andeanae" was not detected in 2013, and was detected at rates of 10.8% in 2014, and 15.8% in 2015. Interestingly, rickettsial DNA levels in singly-infected ticks were significantly lower in "Ca. R. andeanae"-infected ticks compared to R. parkeri-infected ticks (P < 0.0001). Thus, both infection rates and rickettsial DNA levels were higher for R. parkeri than "Ca. R. andeanae." Infection rates of R. parkeri were also higher, and "Ca. R. andeanae" lower, here compared to A. maculatum reported previously in Kansas and Oklahoma. As we continue to monitor infection rates and levels, we anticipate that understanding temporal changes will improve our awareness of human risk for spotted fever rickettsioses. Further, these data may lead to additional studies to evaluate potential interactions among sympatric Rickettsia species in A. maculatum at the population level.

Deformation mechanisms to ameliorate the mechanical properties of novel TRIP/TWIP Co-Cr-Mo-(Cu) ultrafine eutectic alloys

In the present study, the microstructural evolution and the modulation of the mechanical properties have been investigated for a Co-Cr-Mo (CCM) ternary eutectic alloy by addition of a small amount of copper (0.5 and 1 at.%). The microstructural observations reveal a distinct dissimilarity in the eutectic structure such as a broken lamellar structure and a well-aligned lamellar structure and an increasing volume fraction of Co lamellae as increasing amount of copper addition. This microstructural evolution leads to improved plasticity from 1% to 10% without the typical tradeoff between the overall strength and compressive plasticity. Moreover, investigation of the fractured samples indicates that the CCMCu alloy exhibits higher plastic deformability and combinatorial mechanisms for improved plastic behavior. The improved plasticity of CCMCu alloys originates from several deformation mechanisms; i) slip, ii) deformation twinning, iii) strain-induced transformation and iv) shear banding. These results reveal that the mechanical properties of eutectic alloys in the Co-Cr-Mo system can be ameliorated by micro-alloying such as Cu addition.