Emergence of Deep Traps in Long-Term Thermally Stressed CH3NH3PbI3 Perovskite Revealed by Thermally Stimulated Currents

Defect states are known to trigger trap-assisted nonradiative recombination, restricting the performance of perovskite solar cells (PSCs). Here, we investigate the trap states in long-term thermally stressed methylammonium lead iodide (MAPbI₃) perovskite thin films over 500 h at 85 °C employing thermally stimulated current measurements. A prominent deep trap level was detected with an activation energy of ∼0.459 eV in MAPbI₃ without being thermally stressed. Interestingly, upon the application of thermal stress, an additional deep trap level of activation energy ∼0.414 eV emerges and grows with thermal stress duration. After 500 h of thermal stress, the trap density was ∼10¹⁶ cm^-3. The trend of open-circuit voltage loss was in line with the trap density variation with thermal stress time, which elucidates the enhanced nonradiative recombination through these trap states. This work opens a path to understanding the mechanism behind long-term thermal instability and further inspires the development of strategies to minimize trap formation in PSCs.

Thermal Stability and Cation Composition of Hybrid Organic-Inorganic Perovskites

One of the great challenges of hybrid organic-inorganic perovskite photovoltaics is the material's stability at elevated temperatures. Over the past years, significant progress has been achieved in the field by compositional engineering of perovskite semiconductors, e.g., using multiple-cation perovskites. However, given the large variety of device architectures and nonstandardized measurement protocols, a conclusive comparison of the intrinsic thermal stability of different perovskite compositions is missing. In this work, we systematically investigate the role of cation composition on the thermal stability of perovskite thin films. The cations in focus of this study are methylammonium (MA), formamidinium (FA), cesium, and the most common mixtures thereof. We compare the thermal degradation of these perovskite thin films in terms of decomposition, optical losses, and optoelectronic changes when stressed at 85 °C for a prolonged time. Finally, we demonstrate the effect of thermal stress on perovskite thin films with respect to their performance in solar cells. We show that all investigated perovskite thin films show signs of degradation under thermal stress, though the decomposition is more pronounced in methylammonium-based perovskite thin films, whereas the stoichiometry in methylammonium-free formamidinium lead iodide (FAPbI₃) and formamidinium cesium lead iodide (FACsPbI₃) thin films is much more stable. We identify compositions of formamidinium and cesium to result in the most stable perovskite compositions with respect to thermal stress, demonstrating remarkable stability with no decline in power conversion efficiency when stressed at 85 °C for 1000 h. Thereby, our study contributes to the ongoing quest of identifying the most stable perovskite compositions for commercial application.

Nanostructured front electrodes for perovskite/c-Si tandem photovoltaics

The rise in the power conversion efficiency (PCE) of perovskite solar cells has triggered enormous interest in perovskite-based tandem photovoltaics. One key challenge is to achieve high transmission of low energy photons into the bottom cell. Here, nanostructured front electrodes for 4-terminal perovskite/crystalline-silicon (perovskite/c-Si) tandem solar cells are developed by conformal deposition of indium tin oxide (ITO) on self-assembled polystyrene nanopillars. The nanostructured ITO is optimized for reduced reflection and increased transmission with a tradeoff in increased sheet resistance. In the optimum case, the nanostructured ITO electrodes enhance the transmittance by ∼7% (relative) compared to planar references. Perovskite/c-Si tandem devices with nanostructured ITO exhibit enhanced short-circuit current density (2.9 mA/cm² absolute) and PCE (1.7% absolute) in the bottom c-Si solar cell compared to the reference. The improved light in-coupling is more pronounced for elevated angle of incidence. Energy yield enhancement up to ∼10% (relative) is achieved for perovskite/c-Si tandem architecture with the nanostructured ITO electrodes. It is also shown that these nanostructured ITO electrodes are also compatible with various other perovskite-based tandem architectures and bear the potential to improve the PCE up to 27.0%.

Spectral Dependence of Degradation under Ultraviolet Light in Perovskite Solar Cells

Perovskite solar cells (PSCs) demonstrate excellent power conversion efficiencies (PCEs) but face severe stability challenges. One key degradation mechanism is exposure to ultraviolet (UV) light. However, the impact of different UV bands is not yet well established. Here, we systematically study the stability of PSCs on the basis of a methylammonium lead iodide (CH₃NH₃PbI₃) absorber exposed to (i) 310-317 (UV-B range) and (ii) 360-380 nm (UV-A range), under accelerated conditions. We demonstrate that the investigated UV-B band is detrimental to the stability of PSCs, resulting in PCE degradation by more than 50% after an exposure period >1700 sun-hours. This finding is valid for architectures with a range of electron transport layers, including SnO₂, compact-TiO₂, electron-beam TiO₂, and nanoparticle-TiO₂. We also show that photodegradation is apparent for high, as well as for low illumination intensities of UV-B light, but not for illumination with UV-A wavelengths. Finally, we show that degradation of PSCs is preventable at the cost of a small fraction of photocurrent by using UV-filtering or luminescent downshifting layers.

Temperature Variation-Induced Performance Decline of Perovskite Solar Cells

This paper reports on the impact of outdoor temperature variations on the performance of organo metal halide perovskite solar cells (PSCs). It shows that the open-circuit voltage ( V_OC) of a PSC decreases linearly with increasing temperature. Interestingly, in contrast to these expected trends, the current density ( J_SC) of PSCs is found to decline strongly below 20% of the initial value upon cycling the temperatures from 10 to 60 °C and back. This decline in the current density is driven by an increasing series resistance and is caused by the fast temperature variations as it is not apparent for solar cells exposed to constant temperatures of the same range. The effect is fully reversible when the devices are kept illuminated at an open circuit for several hours. Given these observations, an explanation that ascribes the temperature variation-induced performance decline to ion accumulation at the contacts of the solar cell because of temperature variation-induced changes of the built-in field of the PSC is proposed. The effect might be a major obstacle for perovskite photovoltaics because the devices exposed to real outdoor temperature profiles over 4 h showed a performance decline of >15% when operated at a maximum power point.