Room-Temperature One-Pot Synthesis of pH-Responsive Pyridine-Functionalized Carbon Surfaces

Carbon surfaces (glassy carbon, graphite, and boron-doped diamond) were functionalized with layers composed of linked pyridinium and pyridine moieties using simple electrochemical reduction of trifluoroacetylpyridinium. The pyridinium species was generated in situ in solution by the reaction of trifluoroacetic anhydride and pyridine precursors and underwent electrochemical reduction at -1.97 V vs Fc/Fc⁺, as determined by cyclic voltammetry. The pyridine/pyridinium films were electrodeposited at room temperature, on a timescale of minutes, and were characterized using X-ray photoelectron spectroscopy. The as-prepared films have a net positive charge in aqueous solution at pH 9 and below due to the pyridinium content, confirmed by the electrochemical response of differently charged redox molecules at the functionalized surfaces. The positive charge can be enhanced further through protonation of the neutral pyridine component by controlling the solution pH. Moreover, the nitrogen-acetyl bond can be cleaved through base treatment to purposefully increase the neutral pyridine proportion of the film. This results in a surface that can be "switched" from functionally near neutral to a positive charge by treatment in basic and acidic solutions, respectively, through manipulation of the protonation state of the pyridine. The functionalization process demonstrated here is readily achievable at a fast timescale at room temperature and hence can allow for rapid screening of surface properties. Such functionalized surfaces present a means to test in isolation the specific catalytic performance of pyridinic groups toward key processes such as oxygen and CO₂ reduction.

In Situ Determination of pH at Nanostructured Carbon Electrodes Using IR Spectroscopy

Changes in pH at electrode surfaces can occur when redox reactions involving the production or consumption of protons take place. Many redox reactions of biological or analytical importance are proton-coupled, resulting in localized interfacial pH changes as the reaction proceeds. Other important electrochemical reactions, such as hydrogen and oxygen evolution reactions, can likewise result in pH changes near the electrode. However, it is very difficult to measure pH changes located within around 100 µm of the electrode surface. This paper describes the use of in situ attenuated total reflectance (ATR) infrared (IR) spectroscopy to determine the pH of different solutions directly at the electrode interface, while a potential is applied. Changes in the distinctive IR bands of solution phosphate species are used as an indicator of pH change, given that the protonation state of the phosphate ions is pH-dependent. We found that the pH at the surface of an electrode modified with carbon nanotubes can increase from 4.5 to 11 during the hydrogen evolution reaction, even in buffered solutions. The local pH change accompanying the hydroquinone-quinone redox reaction is also determined.

Investigations into the mechanism of copper-mediated Glaser-Hay couplings using electrochemical techniques

The mechanism of the copper mediated C-C bond forming reaction known as Glaser-Hay coupling (alkyne dimerization) has been investigated using electrochemical techniques. Applying an oxidative potential to a copper or copper-coated graphite electrode in the presence of the organic base DABCO results in the dimerization of phenylacetylene in good yield. Further mechanistic investigation has shown that this reaction medium results in the assembly of a dinuclear Cu(i) complex which, although previously reported, has never been shown to have catalytic properties for C-C bond formation. The complex is reminiscent of that proposed in the Bohlmann model for the Glaser-Hay reaction and as such lends weight to this proposed mechanism above the alternative proposed mononuclear catalytic cycle.

Models of the iron-only hydrogenase enzyme: structure, electrochemistry and catalytic activity of Fe2(CO)3(μ-dithiolate)(μ,κ1,κ2-triphos)

A series of Fe₂(triphos)(CO)₃(μ-dithiolate) complexes have been prepared and studied as models of the diiron centre in [FeFe]-hydrogenases.

Electrochemical synthesis of copper(i) acetylides via simultaneous copper ion and catalytic base electrogeneration for use in click chemistry

We report an efficient and sustainable electrochemical synthesis of copper(i) acetylides using simultaneous copper oxidation and Hofmann elimination of quaternary ammonium salts.

Insight into the Nature of Iron Sulfide Surfaces During the Electrochemical Hydrogen Evolution and CO2 Reduction Reactions

Greigite and other iron sulfides are potential, cheap, earth-abundant electrocatalysts for the hydrogen evolution reaction (HER), yet little is known about the underlying surface chemistry. Structural and chemical changes to a greigite (Fe₃S₄)-modified electrode were determined at -0.6 V versus standard hydrogen electrode (SHE) at pH 7, under conditions of the HER. In situ X-ray absorption spectroscopy was employed at the Fe K-edge to show that iron-sulfur linkages were replaced by iron-oxygen units under these conditions. The resulting material was determined as 60% greigite and 40% iron hydroxide (goethite) with a proposed core-shell structure. A large increase in pH at the electrode surface (to pH 12) is caused by the generation of OH^- as a product of the HER. Under these conditions, iron sulfide materials are thermodynamically unstable with respect to the hydroxide. In situ infrared spectroscopy of the solution near the electrode interface confirmed changes in the phosphate ion speciation consistent with a change in pH from 7 to 12 when -0.6 V versus SHE is applied. Saturation of the solution with CO₂ resulted in the inhibition of the hydroxide formation, potentially due to surface adsorption of HCO₃^-. This study shows that the true nature of the greigite electrode under conditions of the HER is a core-shell greigite-hydroxide material and emphasizes the importance of in situ investigation of the catalyst under operation to develop true and accurate mechanistic models.

Electrochemical Fouling of Dopamine and Recovery of Carbon Electrodes

A significant problem with implantable sensors is electrode fouling, which has been proposed as the main reason for biosensor failures in vivo. Electrochemical fouling is typical for dopamine (DA) as its oxidation products are very reactive and the resulting polydopamine has a robust adhesion capability to virtually all types of surfaces. The degree of DA fouling of different carbon electrodes with different terminations was determined using cyclic voltammetry (CV) and scanning electrochemical microscopy (SECM) approach curves and imaging. The rate of electron transfer kinetics at the fouled electrode surface was determined from SECM approach curves, allowing a comparison of insulating film thickness for the different terminations. SECM imaging allowed the determination of different morphologies, such as continuous layers or islands, of insulating material. We show that heterogeneous modification of carbon electrodes with carboxyl-amine functionalities offers protection against formation of an insulating polydopamine layer, while retaining the ability to detect DA. The benefits of the heterogeneous termination are proposed to be due to the electrostatic repulsion between amino-functionalities and DA. Furthermore, we show that the conductivity of the surfaces as well as the response toward DA was recovered close to the original performance level after cleaning the surfaces for 10-20 cycles in H₂SO₄ on all materials but pyrolytic carbon (PyC). The recovery capacity of the PyC electrode was lower, possibly due to stronger adsorption of DA on the surface.

Copper complexes with dissymmetrically substituted bis(thiosemicarbazone) ligands as a basis for PET radiopharmaceuticals: control of redox potential and lipophilicity

Copper(ii) bis(thiosemicarbazone) derivatives have been used extensively in positron emission tomography (PET) to image hypoxia and blood flow and to radiolabel cells for cell tracking. These applications depend on control of redox potentials and lipophilicity of the bis(thiosemicarbazone) complexes, which can be adjusted by altering peripheral ligand substituents. This paper reports the synthesis of a library of new dissymmetrically substituted bis(thiosemicarbazone) ligands by controlling the condensation reactions between dicarbonyl compounds and 4-substituted-3-thiosemicarbazides or using acetal protection. Copper complexes of the new ligands have been prepared by reaction with copper acetate or via transmetallation of the corresponding zinc complexes, which are convenient precursors for the rapid synthesis of radio-copper complexes. Well-defined structure-activity relationships linking ligand alkylation patterns with redox potential and lipophilicity of the complexes are reported.

In situ spectroscopic monitoring of CO2 reduction at copper oxide electrode

Copper oxide modified electrodes were investigated as a function of applied electrode potential using in situ infrared spectroscopy and ex situ Raman and X-ray photoelectron spectroscopy. In deoxygenated KHCO₃ electrolyte bicarbonate and carbonate species were found to adsorb to the electrode during reduction and the CuO was reduced to Cu(i) or Cu(0) species. Carbonate was incorporated into the structure and the CuO starting material was not regenerated on cycling to positive potentials. In contrast, in CO₂ saturated KHCO₃ solution, surface adsorption of bicarbonate and carbonate was not observed and adsorption of a carbonato-species was observed with in situ infrared spectroscopy. This species is believed to be activated, bent CO₂. On cycling to negative potentials, larger reduction currents were observed in the presence of CO₂; however, less of the charge could be attributed to the reduction of CuO. In the presence of CO₂ CuO underwent reduction to Cu₂O and potentially Cu, with no incorporation of carbonate. Under these conditions the CuO starting material could be regenerated by cycling to positive potentials.

Nanodiamonds on tetrahedral amorphous carbon significantly enhance dopamine detection and cell viability

We hypothesize that by using integrated carbon nanostructures on tetrahedral amorphous carbon (ta-C), it is possible to take the performance and characteristics of these bioelectrodes to a completely new level. The integrated carbon electrodes were realized by combining nanodiamonds (NDs) with ta-C thin films coated on Ti-coated Si-substrates. NDs were functionalized with mixture of carboxyl and amine groups ND_andante or amine ND_amine, carboxyl ND_vox or hydroxyl groups ND_H and drop-casted or spray-coated onto substrate. By utilizing these novel structures we show that (i) the detection limit for dopamine can be improved by two orders of magnitude [from 10µM to 50nM] in comparison to ta-C thin film electrodes and (ii) the coating method significantly affects electrochemical properties of NDs and (iii) the ND coatings selectively promote cell viability. ND_andante and ND_H showed most promising electrochemical properties. The viability of human mesenchymal stem cells and osteoblastic SaOS-2 cells was increased on all ND surfaces, whereas the viability of mouse neural stem cells and rat neuroblastic cells was improved on ND_andante and ND_H and reduced on ND_amine and ND_vox. The viability of C6 cells remained unchanged, indicating that these surfaces will not cause excess gliosis. In summary, we demonstrated here that by using functionalized NDs on ta-C thin films we can significantly improve sensitivity towards dopamine as well as selectively promote cell viability. Thus, these novel carbon nanostructures provide an interesting concept for development of various in vivo targeted sensor solutions.

CO2 capture and electrochemical conversion using superbasic [P66614][124Triz]

The ionic liquid trihexyltetradecylphosphonium 1,2,4-triazolide, [P66614][124Triz], has been shown to chemisorb CO2 through equimolar binding of the carbon dioxide with the 1,2,4-triazolide anion. This leads to a possible new, low energy pathway for the electrochemical reduction of carbon dioxide to formate and syngas at low overpotentials, utilizing this reactive ionic liquid media. Herein, an electrochemical investigation of water and carbon dioxide addition to the [P66614][124Triz] on gold and platinum working electrodes is reported. Electrolysis measurements have been performed using CO2 saturated [P66614][124Triz] based solutions at -0.9 V and -1.9 V on gold and platinum electrodes. The effects of the electrode material on the formation of formate and syngas using these solutions are presented and discussed.

Reduction of Carbon Dioxide to Formate at Low Overpotential Using a Superbase Ionic Liquid

A new low-energy pathway is reported for the electrochemical reduction of CO2 to formate and syngas at low overpotentials, utilizing a reactive ionic liquid as the solvent. The superbasic tetraalkyl phosphonium ionic liquid [P66614][124Triz] is able to chemisorb CO2 through equimolar binding of CO2 with the 1,2,4-triazole anion. This chemisorbed CO2 can be reduced at silver electrodes at overpotentials as low as 0.17 V, forming formate. In contrast, physically absorbed CO2 within the same ionic liquid or in ionic liquids where chemisorption is impossible (such as [P66614][NTf2]) undergoes reduction at significantly increased overpotentials, producing only CO as the product.

Electrocatalytic proton reduction catalysed by the low-valent tetrairon-oxo cluster [Fe4(CO)10(κ2-dppn)(μ4-O)]2− [dppn = 1,1′-bis(diphenylphosphino)naphthalene]

[Fe₄(CO)₁₀(κ²-dppn)(μ₄-O)]²⁻ reduces protons and DFT calculations support the sequential formation of hydride and dihydrogen ligands at the unique iron centre.

Surface redox chemistry and mechanochemistry of insulating polystyrene nanospheres

Voltammetric response of electrode-immobilised polystyrene nanoparticles depends on prior mechanical agitation of polystyrene surface.

Hydrogenase biomimetics: Fe2(CO)4(μ-dppf)(μ-pdt) (dppf = 1,1'-bis(diphenylphosphino)ferrocene) both a proton-reduction and hydrogen oxidation catalyst

Fe2(CO)4(μ-dppf)(μ-pdt) catalyses the conversion of protons and electrons into hydrogen and also the reverse reaction thus mimicing both types of binuclear hydrogenase enzymes.

Bioinspired Hydrogenase Models: The Mixed-Valence Triiron Complex [Fe3(CO)7(μ-edt)2] and Phosphine Derivatives [Fe3(CO)7-x (PPh3) x (μ-edt)2] (x = 1, 2) and [Fe3(CO)5(κ2-diphosphine)(μ-edt)2] as Proton Reduction Catalysts

The mixed-valence triiron complexes [Fe3(CO)7-x (PPh3) x (μ-edt)2] (x = 0-2; edt = SCH2CH2S) and [Fe3(CO)5(κ2-diphosphine)(μ-edt)2] (diphosphine = dppv, dppe, dppb, dppn) have been prepared and structurally characterized. All adopt an anti arrangement of the dithiolate bridges, and PPh3 substitution occurs at the apical positions of the outer iron atoms, while the diphosphine complexes exist only in the dibasal form in both the solid state and solution. The carbonyl on the central iron atom is semibridging, and this leads to a rotated structure between the bridged diiron center. IR studies reveal that all complexes are inert to protonation by HBF4·Et2O, but addition of acid to the pentacarbonyl complexes results in one-electron oxidation to yield the moderately stable cations [Fe3(CO)5(PPh3)2(μ-edt)2]+ and [Fe3(CO)5(κ2-diphosphine)(μ-edt)2]+, species which also result upon oxidation by [Cp2Fe][PF6]. The electrochemistry of the formally Fe(I)-Fe(II)-Fe(I) complexes has been investigated. Each undergoes a quasi-reversible oxidation, the potential of which is sensitive to phosphine substitution, generally occurring between 0.15 and 0.50 V, although [Fe3(CO)5(PPh3)2(μ-edt)2] is oxidized at -0.05 V. Reduction of all complexes is irreversible and is again sensitive to phosphine substitution, varying between -1.47 V for [Fe3(CO)7(μ-edt)2] and around -1.7 V for phosphine-substituted complexes. In their one-electron-reduced states, all complexes are catalysts for the reduction of protons to hydrogen, the catalytic overpotential being increased upon successive phosphine substitution. In comparison to the diiron complex [Fe2(CO)6(μ-edt)], [Fe3(CO)7(μ-edt)2] catalyzes proton reduction at 0.36 V less negative potentials. Electronic structure calculations have been carried out in order to fully elucidate the nature of the oxidation and reduction processes. In all complexes, the HOMO comprises an iron-iron bonding orbital localized between the two iron atoms not ligated by the semibridging carbonyl, while the LUMO is highly delocalized in nature and is antibonding between both pairs of iron atoms but also contains an antibonding dithiolate interaction.

Nanodiamond surface redox chemistry: influence of physicochemical properties on catalytic processes

Modification of an electrode with an immobilised layer of nanodiamond is found to significantly enhance the recorded currents for reversible oxidation of ferrocene methanol (FcMeOH). Current enhancement is related to nanodiamond diameter, with enhancement increasing in the order 1000 nm < 250 nm < 100 nm < 10 nm < 5 nm. We attribute the current enhancement to two catalytic processes: i) electron transfer between the solution redox species and redox-active groups on the nanodiamond surface; ii) electron transfer mediated by FcMeOH⁺ adsorbed onto the nanodiamond surface. The first process is pH dependent as it depends on nanodiamond surface functionalities for which electron transfer is coupled to proton transfer. The adsorption-mediated process is observed most readily at slow scan rates and is due to self-exchange between adsorbed FcMeOH⁺ and FcMeOH in solution. FcMeOH⁺ has a strong electrostatic affinity for the nanodiamond surface, as confirmed by in situ infrared (IR) experiments.

Electrochemical characterisation of graphene nanoflakes with functionalised edges

Graphene nanoflakes (GNF) of diameter ca. 30 nm and edge-terminated with carboxylic acid (COOH) or amide functionalities were characterised electrochemically after drop-coating onto a boron-doped diamond (BDD) electrode. In the presence of the outer-sphere redox probe ferrocenemethanol there was no discernible difference in electrochemical response between the clean BDD and GNF-modified electrodes. When ferricyanide or hydroquinone were used as redox probes there was a marked difference in response at the electrode modified with COOH-terminated GNF in comparison to the unmodified BDD and amide-terminated GNF electrode. The response of the COOH-terminated GNF electrode was highly pH dependent, with the most dramatic differences in response noted at pH < 8. This pH range coincides with partial protonation of the carboxylic acid groups as determined by titration. The acid edge groups occupy a range of bonding environments and are observed to undergo deprotonation over a pH range ca. 3.7 to 8.3. The protonation state of the GNF influences the oxidation mechanism of hydroquinone and in particular the number of solution protons involved in the reaction mechanism. The voltammetric response of ferricyanide is very inhibited by the presence of COOH-terminated GNF at pH < 8, especially in low ionic strength solution. While the protonation state of the GNF is clearly a major factor in the observed response, the exact role of the acid group in the redox process has not been firmly established. It may be that the ferricyanide species is unstable in the solution environment surrounding the GNF, where dynamic protonation equilibria are at play, perhaps through disruption to ion pairing.

Redox transformations at nanodiamond surfaces revealed by in situ infrared spectroscopy

Attenuated total reflectance infrared spectroscopy is used to monitor nanodiamond surface group transformations in the presence of aqueous IrCl(6)(2-). Electron transfer between the nanoparticle surface and the solution redox species results in oxidation of ∼8.5% of surface alcohol groups, with concomitant formation of unsaturated ketone or quinone-like moieties.

Bio-inspired hydrogenase models: mixed-valence triion complexes as proton reduction catalysts

Mixed-valence triiron complexes Fe(3)(CO)(7-x)(PPh(3))(x)(μ-edt)(2) (x = 0-2) have been prepared and are shown to act as proton reduction catalysts. Catalysis takes place via an ECEC mechanism with a reduced overpotential of ca. 0.45 V for Fe(3)(CO)(7)(μ-edt)(2) as compared to the corresponding diiron complex.

Free radical facilitated damage of ungual keratin

Thioglycolic acid (TA) and urea hydrogen peroxide (urea H(2)O(2)) are thought to disrupt alpha-keratin disulfide links in the nail. However, optimal clinical use of these agents to improve the treatment of nail disorders is currently hindered by a lack of fundamental data to support their mechanism of action. The aim of this study was to investigate how the redox environment of ungual keratin, when manipulated by TA and urea H(2)O(2), influenced the properties of the nail barrier. Potentiometric and voltammetric measurements demonstrated that urea H(2)O(2) obeyed the Nernst equation for a proton coupled one-electron transfer redox process while TA underwent a series of redox reactions that was complicated by electrode adsorption and dimer formation. The functional studies demonstrated that nail permeability, measured through TBF penetration (38.51+/-10.94 microg/cm(2)/h) and nail swelling (244.10+/-14.99% weight increase), was greatest when relatively low concentrations of the thiolate ion were present in the applied solution. Limiting the thiolate ion to low levels in the solution retards thiolate dimerisation and generates thiyl free radicals. It appeared that this free radical generation was fundamental in facilitating the redox-mediated keratin disruption of the ungual membrane.

Focused ion beam fabrication of boron-doped diamond ultramicroelectrodes

The fabrication of ultramicroelectrodes (UMEs) for analytical electrochemical applications has been explored, using boron-doped diamond as the active electrode material in an insulating coating formed by deposition of electrophoretic paint. Because of the rough nature of the diamond film, the property of such coatings that is normally exploited in the fabrication of UMEs, namely the tendency to retract automatically from sharp protrusions, cannot be used in the present instance. Instead focused ion beam (FIB) sputtering was employed to controllably produce UMEs with well-defined geometry, critical dimension of a few micrometers, and very thin insulating coatings. If the FIB machining is carried out at normal incidence to the diamond electrode surface, significant ion beam damage reduces the yield of successful electrodes. However, if a parallel machining geometry is employed, high yields of ultramicroelectrodes with a flat disk geometry can be obtained very reliably. The electrochemical properties of diamond UMEs are characterized. They show much lower background currents than the equivalent Pt or carbon fiber electrodes but more varied electrochemical response than macroscopic diamond electrodes.

Diamond at the nanoscale: applications of diamond nanoparticles from cellular biomarkers to quantum computing

Although nanocrystalline diamond powders have been produced in industrial quantities, mainly by detonation synthesis, for many decades their use in applications other than traditional polishing and grinding have been limited, until recently. This paper presents the wide-ranging applications of nanodiamond particles to date and discusses future research directions in this field. Owing to the recent commercial availability of these powders and the present interest in nanotechnology, one can predict a huge increase in research with these materials in the very near future. However, to fully exploit these materials, fundamental as well as applied research is required to understand the transition between bulk and surface properties as the size of particles decreases.

Redox properties of undoped 5 nm diamond nanoparticles

This paper demonstrates the promoting effects of 5 nm undoped detonation diamond nanoparticles on redox reactions in solution. An enhancement in faradaic current for the redox couples Ru(NH(3))(6)(3+/2+) and Fe(CN)(6)(4-/3-) was observed for a gold electrode modified with a drop-coated layer of nanodiamond (ND), in comparison to the bare gold electrode. The ND layer was also found to promote oxygen reduction. Surface modification of the ND powders by heating in air or in a hydrogen flow resulted in oxygenated and hydrogenated forms of the ND, respectively. Oxygenated ND was found to exhibit the greatest electrochemical activity and hydrogenated ND the least. Differential pulse voltammetry of electrode-immobilised ND layers in the absence of solution redox species revealed oxidation and reduction peaks that could be attributed to direct electron transfer (ET) reactions of the ND particles themselves. It is hypothesised that ND consists of an insulating sp(3) diamond core with a surface that has significant delocalised pi character due to unsatisfied surface atoms and C[double bond, length as m-dash]O bond formation. At the nanoscale surface properties of the particles dominate over those of the bulk, allowing ET to occur between these essentially insulating particles and a redox species in solution or an underlying electrode. We speculate that reversible reduction of the ND may occur via electron injection into available surface states at well-defined reduction potentials and allow the ND particles to act as a source and sink of electrons for the promotion of solution redox reactions.

Fabrication of Boron-Doped Diamond Ultramicroelectrodes for Use in Scanning Electrochemical Microscopy Experiments

Boron-doped diamond (BDD) ultramicroelectrode (UME) tips were fabricated by the growth of BDD films by chemical vapor deposition onto sharpened tungsten wires. Both nanocrystalline and microcrystalline forms of diamond coatings were examined. The diamond-coated wires were selectively insulated with nail varnish, electrophoretic paint, or fast-setting epoxy to form UME tips of critical dimensions of 1-25 microm. The geometry of the exposed electrode area was disk or hemispherical in most cases. Cyclic voltammetry and chronoamperometry were used to assess exposed electrode area and integrity of the insulation. BDD UMEs were used to obtain SECM approach curves to an insulating and a conducting substrate, which were fitted to the theory appropriate for the observed tip geometry. The tips were used to obtain SECM images of immobilized respiring E. coli, illustrating the suitability of BDD UMEs for electrochemical imaging in biological media.

Using scanning electrochemical microscopy (SECM) to measure the electron-transfer kinetics of cytochrome c immobilized on a COOH-terminated alkanethiol monolayer on a gold electrode

Cytochrome c was electrostatically immobilized onto a COOH-terminated alkanethiol self-assembled monolayer (SAM) on a gold electrode at ionic strengths of less than 40 mM. Scanning electrochemical microscopy (SECM) was used to simultaneously measure the electron transfer (ET) kinetics of the bimolecular ET between a solution-based redox mediator and the immobilized protein and the tunneling ET between the protein and the underlying gold electrode. Approach curves were recorded with ferrocyanide as a mediator at different coverages of cytochrome c and at different substrate potentials, allowing the measurement of k(BI) = 2 x 10(8) mol(-1) cm3 s(-1) for the bimolecular ET and k degrees = 15 s(-1) for the tunneling ET. The kinetics of ET was also found to depend on the immobilization conditions of cytochrome c: covalent attachment gave slightly slower tunneling ET values, and a mixed CH3/COOH-terminated ML gave faster tunneling ET rates. This is consistent with previous studies and is believed to be related to the degree of mobility of cyt c in its binding configuration and its orientation with respect to the underlying electrode surface.

Interaction of Silver(I) Ions with the Respiratory Chain of Escherichia coli: An Electrochemical and Scanning Electrochemical Microscopy Study of the Antimicrobial Mechanism of Micromolar Ag+

Electrochemical techniques were used to study the behavior of Escherichia coli on the addition of <or=10 microM AgNO(3). Respiration in the presence of glucose was measured using a Clark ultramicroelectrode to determine the oxygen concentration as a function of time. The rate of respiration increased initially upon the addition of silver(I) because of the uncoupling of the respiratory chain, followed by cessation of respiration. The toxicity of 1 microM AgNO(3), as determined by the time until respiration ceased, increased in the absence of glucose and in the presence of K(+). The uptake of 1 microM Ag(+), measured from the stripping peak height of Ag electrodeposited on a 25 microm Pt ultramicroelectrode, showed a fastest uptake in the presence of glucose, although glucose was not required for uptake. Efflux of Ag(+) from cells was also detected in the presence of glucose. Scanning electrochemical microscopy (SECM) was used to follow the uptake of 1 microM Ag(+) by living and dead E. coli immobilized on a glass slide coated with poly-l-lysine. Ferricyanide was used as an alternative electron acceptor to oxygen to probe the site of inhibition of Ag(+) in the respiratory chain.