Parametric investigation of W-EDM factors for machining AM60B conductive biomaterial

Wire-electrical discharge machining (W-EDM) is a precise and efficient non-traditional technology employed to cut intricate shapes in conductive biomaterials. These biomaterials are challenging to machine using traditional methods. This present study delves into the impact of various process parameters, namely discharge duration (Ddur), spark gap time (Stime), discharge voltage (Dvolt), and wire advance rate rate (Wadv). This research evaluates the impact of several factors on response variables, namely the machining rate (MR) and surface irregularity (SR), during the machining process of the AM60B magnesium alloy. The confirmation of the material used in the machining process is achieved via the utilisation of a scanning electron microscopy (SEM) image in conjunction with an energy dispersive spectroscopic (EDS) image. The experiment is designed as L9 orthogonal array by using Taguchi's approach, taking into account 4 factors with 3 levels. The objective of this experiment is to ascertain the most favourable values for machining parameters while working with AM60B magnesium alloy using brass wire. Through analysis of variance (ANOVA), the study confirms that wire advance rate (43.10%) is the most influencing parameter for machining rate and surface irregularity followed by spark gap time (33.91%) and discharge duration (11.48%). Additionally, The TOPSIS-CRITIC and the desirability approach were used in order to determine the optimum parameter combinations that provide the most favourable combined output. Confirmatory testing is used to evaluate the efficiency of the stated ideal conditions. The maximum improvement in Desirability approach is obtained at 4.56% and 4.193% for MR and SR respectively. The maximum improvement in TOPSIS approach is obtained at 1.77% and 2.78% for MR and SR respectively.

Effect of silicon carbide on kerf convergence and irregularity of the surface during abrasive water jet machining of fiber-metal hybrid composites

The traditional way to machine hybrid composites is hard because they tend to break, have a high retraction, have a high service temperature, and have an uneven surface irregularity. For high-strength fiber/metal composite constructions, alternative machining methods have drawn interest as a solution to these problems. Current research focuses on enhancing the Abrasive Water Jet Machining process by optimizing its variables using a composite material of epoxy reinforced with silicon carbide, stainless steel wire mesh, and Kevlar. The variables assessed are the Nozzle-to-substrate gap (S), the Abrasive discharge molding and different percentages of silicon carbide (SiC) filler (0%, 3%, and 6% by weight), three different types of hybrid laminates (H1, H2, and H3) were produced. The response surface method (RSM) was utilized in this learning, specifically on a central composite design, to calculate and optimize machining variables based on the Kerf convergence ratio (Kt) and Surface irregularity (Ra) as responses. According to the results, the traverse feed velocity, Abrasive discharge proportion, and Nozzle-to-substrate gap are the critical factors in determining Surface irregularity and Kerf convergence width (H1 laminate) for a fiber/metal laminate with 0%, 3% and 6% weight fraction. In the case of a 3% weight fraction H2 laminate, the traverse feed velocity was identified as the primary factor affecting the Kerf convergence ratio. In contrast, traverse feed velocity and Nozzle-to-substrate gap had the most significant influence on Surface irregularity. The findings also indicated that S, followed by Abrasive discharge proportion and traverse feed velocity, are the variables that have the most significant influence when cutting 6 wt% SiC filler particle fiber/metal laminate (H3 laminate). For Surface irregularity, the combination of traverse feed velocity and Nozzle-to-substrate gap had the most significant impact. To validate the optimization results, confirmatory tests was conducted, and the findings were very similar to the experimental values, indicating the accuracy and effectiveness of the optimization process. To better understand the manufacturing processes, a scanning electron microscope was used to examine the morphological features of the machined surfaces, such as delamination, fibre breakage, and fibre pull-out.

Paternal stress alters synaptic density and expression of GAP-43, GRIN1, M1 and SYP genes in the hippocampus and cortex of offspring of stress-induced male rats

Adverse experiences during pregnancy have a negative impact on the neuronal structure and behavior of offspring, but the effects of a father's life events on the outcome of progeny are scarce. The present study is intended to investigate whether paternal stress affects the offspring brain structure, especially those regions concerned with learning and formation of memory, namely the hippocampus (HC) and prefrontal cortex (PFC), and also the expression of certain genes linked to learning and memory in the offspring. Induced stress to male rats by five stressors, one per day followed by allowing them to mate with the normal, unstressed female. Synaptophysin immunoreactivity was assessed in the tissue sections of the HC and PFC as well as expression of genes concerned with learning and memory was evaluated by RT-PCR in the progeny of stress-received males. The progeny of stressed rats had reduced antisynaptophysin immunoreactivity in the HC and PFC. The synaptic density in HC was less in the A-S (Offspring of male rats who received stress during adulthood) and PA-S (offspring of male rats who received stress during both adolescence and adulthood) than in P-S (offspring of male rats who received stress during adolescence) and C-C (offspring of control) groups. Similar results were observed even in the PFC. The results of post hoc tests proved that the HC and PFC of the progeny of stress-exposed rats exhibited considerably less synaptic density than control (P<0.05), and the levels of expression of GAP-43, GRIN1, M1, and SYP genes in HC and PFC were down-regulated. This study concludes that paternal adverse experiences can affect the offspring's synaptic plasticity and also the genes, which can regulate learning and formation of memory.

Influence of Alkaline-Earth-Metal Substitutions on the Bismuth Ruthenate Structure: Bi2-xA'xRu2O6O'1-y (A' = Mg, Ca, Sr)

Solid solutions with the formula of Bi_2-xA'_xRu₂O_7-y (A' = Mg, Ca, Sr; 0 ≤ x ≤ 0.2 for Mg, 0 ≤ x ≤ 1 for Ca, and 0 ≤ x ≤ 0.5 for Sr) have been synthesized and characterized. The crystal structures for these phases are found to be in the pyrochlore family, crystallizing in the cubic space group Fd3̅m with complex A/A' cation coordination environments. The Bi cation is found to be off-center from the ideal position because of a lone-pair distortion, while the positions of the substituted A' cations vary based on the size and ionicity. The neutron structure refinements reveal a similar propensity to off-center regarding Ca and Sr, while Mg features the largest static displacement of up to 0.48 Å. Interestingly, this is one of only two known pyrochlores with Mg²⁺ located in an 8-coordinated site. The average Ru oxidation state for each substitution is found to increase, and charge compensates for the lower divalent A' substitution. The solid solutions show temperature-independent resistance across the series with small changes in magnitude that scale with the amount of substitution, while displaying Pauli paramagnetic behavior throughout.

Local Moment Instability of Os in Honeycomb Li2.15Os0.85O3

Compounds with honeycomb structures occupied by strong spin orbit coupled (SOC) moments are considered to be candidate Kitaev quantum spin liquids. Here we present the first example of Os on a honeycomb structure, Li_2.15(3)Os_0.85(3)O₃ (C2/c, a = 5.09 Å, b = 8.81 Å, c = 9.83 Å, β = 99.3°). Neutron diffraction shows large site disorder in the honeycomb layer and X-ray absorption spectroscopy indicates a valence state of Os (4.7 ± 0.2), consistent with the nominal concentration. We observe a transport band gap of Δ = 243 ± 23 meV, a large van Vleck susceptibility, and an effective moment of 0.85 μ_B, much lower than expected from 70% Os(+5). No evidence of long range order is found above 0.10 K but a spin glass-like peak in ac-susceptibility is observed at 0.5 K. The specific heat displays an impurity spin contribution in addition to a power law ∝T^(0.63±0.06). Applied density functional theory (DFT) leads to a reduced moment, suggesting incipient itineracy of the valence electrons, and finding evidence that Li over stoichiometry leads to Os(4+)−Os(5+) mixed valence. This local picture is discussed in light of the site disorder and a possible underlying quantum spin liquid state.

Informatics to Improve Medical Care of a Nation

At the Thirtieth World Health Assembly in 1977 the Member States of the World Health Organization endorsed the policy of developing their health care systems through the primary health care approach. The present paper is concerned with the application of certain significant features of informatics for the development and improvement of health care management in different countries.

HBeAg levels at week 24 predict response to 8 years of tenofovir in HBeAg-positive chronic hepatitis B patients

BACKGROUND

Hepatitis B e antigen (HBeAg) seroconversion is a treatment endpoint for HBeAg-positive CHB, and a necessary precursor to HBsAg loss. Biomarkers that predict serological outcomes would be useful.

AIM

To evaluate the utility of measuring HBeAg levels for predicting HBeAg seroconversion and HBsAg loss under long-term tenofovir (TDF) therapy.

METHODS

A total of 266 patients were enrolled into a phase III study of TDF vs adefovir (ADV) for 48 weeks in HBeAg-positive patients, followed by open-label TDF up to 384 weeks. Serum HBeAg levels were measured for subjects with samples available at both baseline and week 24 of treatment (n = 200). Analysis compared subjects who achieved HBeAg seroconversion by week 384 vs no HBeAg seroconversion.

RESULTS

HBeAg seroconversion rate was 52% by week 384. Time to HBeAg seroconversion was 80 weeks (IQR: 36-162). HBeAg decline at week 24 was associated with HBeAg seroconversion (1.63 vs 0.90 log₁₀ PEIU/mL, P = .002). The optimal threshold for identifying HBeAg seroconversion was HBeAg decline ≥2.2 log₁₀ PEIU/mL at week 24, with HBeAg seroconversion achieved by 76% of patients, compared to 44% if HBeAg decline <2.2 log₁₀ (P < .0001). HBeAg decline ≥2.2 log₁₀ PEIU/mL at week 24 was associated with HBsAg loss in genotype A or D patients (38% vs 15%, P = .03). Precore/basal core promotor variants were associated with lower baseline HBeAg levels, but not HBeAg seroconversion.

CONCLUSION

Decline in HBeAg levels by week 24 was associated with HBeAg seroconversion and HBsAg loss in HBeAg-positive chronic hepatitis B patients treated with long-term TDF.

Sofosbuvir plus ribavirin in treatment-naïve patients with chronic hepatitis C virus genotype 1 or 3 infection in India

Until 2014, pegylated interferon plus ribavirin was the recommended standard of care for the treatment of chronic hepatitis C virus (HCV) infection in India. This open-label phase 3b study, conducted across 14 sites in India between 31 March 2014 and 30 November 2015, evaluated the efficacy and safety of sofosbuvir plus ribavirin therapy among treatment-naïve patients with chronic genotype 1 or 3 HCV infection. A total of 117 patients with genotype 1 or 3 HCV infection were randomized 1:1 to receive sofosbuvir 400 mg and weight-based ribavirin (1000 or 1200 mg) daily for 16 or 24 weeks. Among those with genotype 1 infection, the primary efficacy endpoint of sustained virologic response at 12 weeks post-treatment (SVR12) was reported in 90% (95% confidence intervals [CI], 73-98) and 96% (95% CI, 82-100) of patients following 16 and 24 weeks of treatment, respectively. For patients with genotype 3 infection, SVR12 rates were 100% (95% CI, 88-100) and 93% (95% CI, 78-99) after 16 and 24 weeks of therapy, respectively. Adverse events, most of which were mild or moderate in severity, occurred in 69% and 57% of patients receiving 16 and 24 weeks of treatment, respectively. The most common treatment-emergent adverse events were asthenia, headache and cough. Only one patient in the 24-week group discontinued treatment with sofosbuvir during this study. Overall, sofosbuvir plus ribavirin therapy achieved SVR12 rates ≥90% and was well tolerated among treatment-naïve patients with chronic genotype 1 or 3 HCV infection in India.

trans-4,4'-Dihydroxystilbene (DHS) protects PC12 cells from oxidative damage but induces reactive oxygen species-mediated apoptosis in SHSY-5Y cell line

Polyphenols can exert both, antioxidant and pro-oxidant properties, depending on cell types as well as their concentrations. Hence, it was of interest to examine if the naturally occurring resveratrol analog, trans-4,4'-dihydroxystilbene (DHS) also exert both these activities in a biphasic or cell-specific manner. In this study, we established the cytoprotective action of DHS against hydrogen peroxide (H2O2)-induced apoptotic death of the PC12 cells. DHS reduced mitochondrial membrane permeabilization and deactivated reactive oxygen species (ROS)-mediated caspase-3 activation in the H2O2-treated PC12 cells. However, it induced apoptosis in the human neuroblastoma SHSY-5Y cell line by destabilizing mitochondrial membrane, augmenting ROS and activating caspapse-3. DHS showed better activity than resveratrol in both the chosen models.

From Serendipity to Rational Design: Tuning the Blue Trigonal Bipyramidal Mn3+ Chromophore to Violet and Purple through Application of Chemical Pressure

We recently reported that an allowed d-d transition of trigonal bipyramidal (TBP) Mn³⁺ is responsible for the bright blue color in the YIn_1-xMn_xO₃ solid solution. The crystal field splitting between a'(d_z²) and e'(d_x²-y², d_xy) energy levels is very sensitive to the apical Mn-O distance. We therefore applied chemical pressure to compress the apical Mn-O distance in YIn_1-xMn_xO₃, move the allowed d-d transition to higher energy, and thereby tune the color from blue to violet/purple. This was accomplished by substituting smaller cations such as Ti⁴⁺/Zn²⁺ and Al³⁺ onto the TBP In/Mn site, which yielded novel violet/purple phases. The general formula is YIn_1-x-2y-zMn_xTi_yZn_yAl_zO₃ (x = 0.005-0.2, y = 0.1-0.4, and z ≤ 0.1), where the color darkens with the increasing amount of Mn. Higher y or small additions of Al provide a more reddish hue to the resulting purple colors. Substituting other rare earth cations for Y has little impact on color. Crystal structure analysis by neutron powder diffraction confirms a shorter apical Mn-O distance compared with that in the blue YIn_1-xMn_xO₃. Magnetic susceptibility measurements verify the 3+ oxidation state for Mn. Diffuse reflection spectra were obtained over the wavelength region 200-2500 nm. All samples show excellent near-infrared reflectance comparable to that of commercial TiO₂, making them ideal for cool pigment applications such as energy efficient roofs of buildings and cars where reducing solar heat to save energy is desired. In a comparison with commercial purple pigments, such as Co₃(PO₄)₂, our pigments are much more thermally stable and chemically inert, and are neither toxic nor carcinogenic.

Influence of Structural Disorder on Hollandites A(x)Ru4O8 (A(+) = K, Rb, Rb(1-x)Na(x))

Structural disorder can play an important role in the electrical properties of correlated materials. In this work we examine the average and local disorder in hollandites A(x)Ru4O8 (A(+) = K, Rb, Rb(1-x)Na(x)) through neutron total scattering techniques. Samples with A(+) = Rb, Rb(1-x)Na(x) exhibit the largest amount of local disorder as evidenced by higher atomic displacement parameters, and as a result, a weakened temperature dependence of the resistivity is observed upon cooling as compared to K(x)Ru4O8. All samples exhibit anisotropic resistivity that is dominated by metallic conductivity at lower temperatures, and this is corroborated by Pauli paramagnetic behavior throughout the measured temperature regime.

Structure and Properties of Ir-Containing Oxides with Large Spin-Orbit Coupling: Ba2In(2-x)Ir(x)O(5+δ)

In this work, the solid solution series Ba2In(2-x)Ir(x)O5+δ (x = 0-1.4, 2) was synthesized, and its structural, magnetic, and charge-transport properties were measured. With increasing Ir content, three transitions in the room-temperature structure were observed: orthorhombic to tetragonal to cubic to a monoclinic distortion of a hexagonal BaTiO3 structure. Neutron diffraction shows Ba2In(1.6)Ir(0.4)O5.4 to be cubic and Ba2InIrO6 to be monoclinic, the latter contrary to previously published X-ray diffraction refinements. Magnetization measurements show Curie-Weiss behavior for x = 0.2-0.6, which arises from nearly 50:50 ratio of Ir(V) and Ir(VI). To our knowledge, this is the first time Ir(VI) has been stabilized with standard solid-state methods under ambient conditions. The electrical resistivity measurements show all the compounds studied are semiconducting and that resistivity decreases with increasing Ir content, suggesting the proximity to a metal-insulator transition. A sign reversal in the high-temperature Seebeck coefficient is observed indicating both electron and hole charge transport.

Therapeutic management of botulism in dairy cattle

AIM

To report the successful recovery of few dairy cattle from botulism in response to a modified therapeutic strategy.

MATERIALS AND METHODS

Seventy four naturally-occurring clinical cases of bovine botulism encountered during the period of 2012-2014 which were confirmed by mouse lethality test became material for this study. Affected animals were made into three groups based on the treatment modifications made during the course of study.

RESULTS AND DISCUSSION

With the modified therapeutic regimen, 17 animals recovered after 7-10 days of treatment. Clinical recovery took 2-30 days. Animals which were not given intravenous fluid and calcium recovered uneventfully. Cattle which were already treated with intravenous fluids, calcium borogluconate, and antibiotics did not recover. They were either died or slaughtered for salvage.

CONCLUSION

In cattle with botulism, administration of Vitamin AD3E and activated charcoal aid the clinical recovery. Besides, strictly avoiding anti-clostridial antibiotics, fluid therapy, and calcium therapy may facilitate the clinical recovery. Upon fluid administration, the pulmonary congestion existed in the ailing cattle might have worsened the anoxia. Administration of antibiotics like penicillin, aminoglycosides, and tetracyclines further worsen the neuronal paralysis by increasing the availability of botulinum neurotoxin. Cattle in early botulism have fair chances of recovery with the modified therapy.

Growth differentiation factor-15 encodes a novel microRNA 3189 that functions as a potent regulator of cell death

According to the latest version of miRBase, approximately 30% of microRNAs (miRNAs) are unique to primates, but the physiological function of the vast majority remains unknown. In this study, we identified miR-3189 as a novel, p53-regulated, primate-specific miRNA embedded in the intron of the p53-target gene GDF15. Antagonizing miR-3189 increased proliferation and sensitized cells to DNA damage-induced apoptosis, suggesting a tumor suppressor function for endogenous miR-3189. Identification of genome-wide miR-3189 targets revealed that miR-3189 directly inhibits the expression of a large number of genes involved in cell cycle control and cell survival. In addition, miR-3189 downregulated the expression of multiple p53 inhibitors resulting in elevated p53 levels and upregulation of several p53 targets including p21 (CDKN1A), GADD45A and the miR-3189 host gene GDF15, suggesting miR-3189 auto-regulation. Surprisingly, miR-3189 overexpression in p53-/- cells upregulated a subset of p53-targets including GDF15, GADD45A, and NOXA, but not CDKN1A. Consistent with these results, overexpression of miR-3189 potently induced apoptosis and inhibited tumorigenicity in vivo in a p53-independent manner. Collectively, our study identified miR-3189 as a novel, primate-specific miRNA whose effects are mediated by both p53-dependent and p53-independent mechanisms. miR-3189 may, therefore, represent a novel tool that can be utilized therapeutically to induce a potent proapoptotic effect even in p53-deficient tumors.

Cemented or cementless THA in patients over 80 years with fracture neck of femur: a prospective comparative trial

BACKGROUND

Total hip arthroplasty is associated with a better long term outcome and lesser reoperation rates in the elderly but the risk of complications are believed to be higher in very elderly patients. The study aims to compare the short-term results of cemented and cementless total hip arthroplasty (THA) in active patients >80 years of age with femoral neck fractures.

METHODS

Sixty-two consecutive patients underwent THA during the study period (cemented--31 and cementless--31). The mean age was 84 years (81-94 years). Patients in both groups were comparable in their preoperative variables. Functional and radiological assessments were carried out using validated outcome measures. Complications were recorded.

RESULTS

Fifty-one patients were available for final analysis after accounting for deaths and cases lost in follow-up. Of the 51 patients, 25 (49%) regained their pre-injury mobility status and 36 (70%) were community ambulant. Cementless THA was associated with significantly less surgical time, blood loss, transfusion rates and hospital stay. The overall mortality rates, complications, functional and radiological results were similar in both groups though the number of deaths in the perioperative period was significantly high in patients undergoing cemented THA.

CONCLUSION

Satisfactory improvement in function with low reoperation rates can be achieved irrespective of the technique used. Complication rates are higher when compared to younger patients undergoing the procedure. Risks and benefits should be carefully assessed and explained before subjecting these patients to THA.

Quinoline Alkaloids. Synthesis of Khaplofoline, Ribalinine, and Flindersine

Reaction of 4-hydroxy-3-prenylquinolin-2(1 H)one (5 a) with iodine and silver acetate gave a iodopyranoquinoline (6 a), which was then converted into the alkaloids khaplofoline (1) and ribalinine (2). Reaction of 5a with iodine and mercuric oxide afforded a mixture of 6a and its angular isomer 7 a; the coversion of latter into flindersine (10) is described.

Posttraumatic Intrahepatic Bilioma

Blunt injury abdomen causing biliary injury is rare in children. Collection of bile within or outside the liver after biliary injury is called bilioma. CT scan images of late presenting intra-hepatic bilioma are shown.

A mutant p53/let-7i-axis-regulated gene network drives cell migration, invasion and metastasis

Most p53 mutations in human cancers are missense mutations resulting in a full-length mutant p53 protein. Besides losing tumor suppressor activity, some hotspot p53 mutants gain oncogenic functions. This effect is mediated in part, through gene expression changes due to inhibition of p63 and p73 by mutant p53 at their target gene promoters. Here, we report that the tumor suppressor microRNA let-7i is downregulated by mutant p53 in multiple cell lines expressing endogenous mutant p53. In breast cancer patients, significantly decreased let-7i levels were associated with missense mutations in p53. Chromatin immunoprecipitation and promoter luciferase assays established let-7i as a transcriptional target of mutant p53 through p63. Introduction of let-7i to mutant p53 cells significantly inhibited migration, invasion and metastasis by repressing a network of oncogenes including E2F5, LIN28B, MYC and NRAS. Our findings demonstrate that repression of let-7i expression by mutant p53 has a key role in enhancing migration, invasion and metastasis.

Hydroxyapatite catalyzed aldol condensation: synthesis, spectral linearity, antimicrobial and insect antifeedant activities of some 2,5-dimethyl-3-furyl chalcones

A series of 2,5-dimethyl-3-furyl chalcones [2E-1-(2,5-dimethyl-3-furyl)-3-(substituted phenyl)-2-propen-1-ones] have been synthesized by Hydrotalcite catalyzed aldol condensation between 3-acetyl-2,5-dimethylfuron and substituted benzaldehydes. Yields of chalcones are more than 80%. These chalcones were characterized by their physical constants and spectral data. The group frequencies of infrared ν(cm(-1)) of CO s-cis and s-trans, CH in-plane and out of plane, CH=CH out of plane, C=C out of plane modes, NMR chemical shifts δ(ppm) of Hα, Hβ, CO, Cα and Cβ of these chalcones were correlated with Hammett substituent constants, F and R parameters using single and multi-regression analyses. From the results of statistical analyses, the effects of substituents on the group frequencies are explained. Antibacterial, antifungal and insect antifeedant activities of these chalcones have been studied.

Undulating layers in a new rhodate network: structure of Bi(1.4)CuORh5O10

A new rhodate, Bi(1.4)CuRh(5)O(11), with an hitherto unknown channel structure containing undulating layers of RhO(6) octahedra sharing corners and edges has been discovered and its structure refined from single crystal X-ray diffraction data. The channels contain Bi(3+), Cu(2+), and some O strongly bound to Cu. The Cu coordination is distorted square planar. Mixed Rh(3+)/Rh(4+) valency leads to significant electrical conductivity.

Structural studies and electrical properties of Cs/Al/Te/O phases with the pyrochlore structure

A series of polycrystalline and single crystal cesium aluminum tellurates with the pyrochlore structure have been prepared and characterized. The variations in cell edge for the Cs/Al/Te/O phases range from 10.06 Å for the Al rich limit to 10.14 Å for the Te rich limit. Rietveld structural analyses based on both X-ray and neutron diffraction data were performed on 5 different compositions. Single crystals of 3 compositions were prepared and studied by X-ray diffraction. The anharmonic component of the thermal motion for Cs was small but became significant on replacing Cs with Rb. A maximum in the electrical conductivity of about 0.1 S/cm is found in the middle of this range close to the ideal composition of CsAl(1/3)Te(5/3)O(6). The conductivity is attributed to filled Te 5s states associated with Te(4+) lying just below the conduction band based on empty Te 5s states associated with Te(6+). The relatively large Te(4+) ion is compressed by the lattice, and as this compression increases the filled 5s states approach the conduction band and thereby increases conductivity.

Silver nanoparticles embedded polymer sorbent for preconcentration of uranium from bio-aggressive aqueous media

Adsorptive sorbent for bio-aggressive natural aqueous media like seawater was developed by one pot simultaneous synthesis of silver nanoparticles (Ag nps) and poly(ethylene glycol methacrylate phosphate) (PEGMP) by UV-initiator induced photo-polymerization. The photo-polymerization was carried out by irradiating N,N'-dimethylformamide (DMF) solution containing appropriate amounts of the functional monomer (ethylene glycol methacrylate phosphate), UV initiator (α,α'-dimethoxy-α-phenyl acetophenone), and Ag(+) ions with 365 nm UV light in a multilamps photoreactor. To increase mechanical strength, nano-composite sorbent (Ag@PEGMP) was also reinforced with thermally bonded non-woven poly(propylene) fibrous sheet. Transmission electron microscopy (TEM) of the nano-composite sorbent showed uniform distribution of spherical Ag nanoparticles with particles size ranging from 3 to 6 nm. The maximum amount of Ag(0) that could be anchored in the form of nanoparticles were 5±1 and 10±1 wt.% in self-supported PEGMP and poly(propylene) reinforced PEGMP matrices, respectively. Ag@PEGMP sorbent was found to be stable under ambient conditions for a period of six months. Ag@PEGMP composite sorbent did not exhibit growth at all after incubation with pre-grown Escherichia coli cells, and showed non-adherence of this bacteria to the composite. This indicated that composite sorbent has the bio-resistivity due to bacterial repulsion and bactericidal properties of Ag nanoparticles embedded in the PEGMP. Sorption of U(VI) in PEGMP and Ag@PEGMP nano-composite sorbents from well-stirred seawater was studied to explore the possibility of using it for uranium preconcentration from bio-aggressive aqueous streams. The nano-composite sorbent was used to preconcentrate U(VI) from a process aqueous waste stream.

Mn3+ in trigonal bipyramidal coordination: a new blue chromophore

We show that trivalent manganese, Mn(3+), imparts an intense blue color to oxides when it is introduced at dilution in trigonal bipyramidal coordination. Our optical measurements and first-principles density functional theory calculations indicate that the blue color results from an intense absorption in the red/green region. This absorption is due in turn to a symmetry-allowed optical transition between the valence-band maximum, composed of Mn 3d(x(2)-y(2),xy) states strongly hybridized with O 2p(x,y) states, and the narrow Mn 3d(z(2))-based conduction-band minimum. We begin by demonstrating and explaining the effect using a well-defined prototype system: the hexagonal YMnO(3)-YInO(3) solid solution. We then show that the behavior is a general feature of diluted Mn(3+) in this coordination environment.