Additive Manufacturing of 3D Anatomical Models-Review of Processes, Materials and Applications

The methods of additive manufacturing of anatomical models are widely used in medical practice, including physician support, education and planning of treatment procedures. The aim of the review was to identify the area of additive manufacturing and the application of anatomical models, imitating both soft and hard tissue. The paper outlines the most commonly used methodologies, from medical imaging to obtaining a functional physical model. The materials used to imitate specific organs and tissues, and the related technologies used to produce, them are included. The study covers publications in English, published by the end of 2022 and included in the Scopus. The obtained results emphasise the growing popularity of the issue, especially in the areas related to the attempt to imitate soft tissues with the use of low-cost 3D printing and plastic casting techniques.

Towards engineering heart tissues from bioprinted cardiac spheroids

Currentin vivoandin vitromodels fail to accurately recapitulate the human heart microenvironment for biomedical applications. This study explores the use of cardiac spheroids (CSs) to biofabricate advancedin vitromodels of the human heart. CSs were created from human cardiac myocytes, fibroblasts and endothelial cells (ECs), mixed within optimal alginate/gelatin hydrogels and then bioprinted on a microelectrode plate for drug testing. Bioprinted CSs maintained their structure and viability for at least 30 d after printing. Vascular endothelial growth factor (VEGF) promoted EC branching from CSs within hydrogels. Alginate/gelatin-based hydrogels enabled spheroids fusion, which was further facilitated by addition of VEGF. Bioprinted CSs contracted spontaneously and under stimulation, allowing to record contractile and electrical signals on the microelectrode plates for industrial applications. Taken together, our findings indicate that bioprinted CSs can be used to biofabricate human heart tissues for long termin vitrotesting. This has the potential to be used to study biochemical, physiological and pharmacological features of human heart tissue.

Bacterial Receiver Prototype for Molecular Communication using Rhamnose Operon in a Microfluidic Environment

Bacterial populations are promising candidates for the development of the receiver and transmitter nanomachines for molecular communication (MC). A bacterial receiver is required to uptake the information molecules and produce the detectable molecules following a regulation mechanism. We have constructed a novel bacterial MC receiver using an inducible bacterial L-rhamnoseregulating operon. The proposed bacterial receiver produces green fluorescent protein (GFP) in response to the L-rhamnose information molecules following a quite fast regulation mechanism. To fabricate the receiver, the bacterial population has been transformed using a plasmid harboring L-rhamnose operon genes and gene expressing GFP in a microfluidic environment. We mathematically model the reception process of information molecules and characterize the model parameters by comparing the simulation results of the model in the employed microfluidic environment and the data obtained from the experimental setup. Based on the experimental results, the receiver is able to switch between different low and high concentrations. This work paves the way for the fabrication and modeling of any bacterial operon-based receiver with any proteins rather than GFP. Further, our experimental results indicate that the proposed bacterial receiver has a faster response to information molecules compared to the previous bacterial receiver based on the quorum sensing (QS) process.

A Comprehensive Review on Intracellular Delivery

Intracellular delivery is considered an indispensable process for various studies, ranging from medical applications (cell-based therapy) to fundamental (genome-editing) and industrial (biomanufacture) approaches. Conventional macroscale delivery systems critically suffer from such issues as low cell viability, cytotoxicity, and inconsistent material delivery, which have opened up an interest in the development of more efficient intracellular delivery systems. In line with the advances in microfluidics and nanotechnology, intracellular delivery based on micro- and nanoengineered platforms has progressed rapidly and held great promises owing to their unique features. These approaches have been advanced to introduce a smorgasbord of diverse cargoes into various cell types with the maximum efficiency and the highest precision. This review differentiates macro-, micro-, and nanoengineered approaches for intracellular delivery. The macroengineered delivery platforms are first summarized and then each method is categorized based on whether it employs a carrier- or membrane-disruption-mediated mechanism to load cargoes inside the cells. Second, particular emphasis is placed on the micro- and nanoengineered advances in the delivery of biomolecules inside the cells. Furthermore, the applications and challenges of the established and emerging delivery approaches are summarized. The topic is concluded by evaluating the future perspective of intracellular delivery toward the micro- and nanoengineered approaches.

Application of Environmental Scanning Electron Microscope-Nanomanipulation System on Spheroplast Yeast Cells Surface Observation

The preparation and observations of spheroplast W303 cells are described with Environmental Scanning Electron Microscope (ESEM). The spheroplasting conversion was successfully confirmed qualitatively, by the evaluation of the morphological change between the normal W303 cells and the spheroplast W303 cells, and quantitatively, by determining the spheroplast conversion percentage based on the OD₈₀₀ absorbance data. From the optical microscope observations as expected, the normal cells had an oval shape whereas spheroplast cells resemble a spherical shape. This was also confirmed under four different mediums, that is, yeast peptone-dextrose (YPD), sterile water, sorbitol-EDTA-sodium citrate buffer (SCE), and sorbitol-Tris-Hcl-CaCl₂ (CaS). It was also observed that the SCE and CaS mediums had a higher number of spheroplast cells as compared to the YPD and sterile water mediums. The OD₈₀₀ absorbance data also showed that the whole W303 cells were fully converted to the spheroplast cells after about 15 minutes. The observations of the normal and the spheroplast W303 cells were then performed under an environmental scanning electron microscope (ESEM). The normal cells showed a smooth cell surface whereas the spheroplast cells had a bleb-like surface after the loss of its integrity when removing the cell wall.

Finite Element Analysis of Single Cell Stiffness Measurements Using PZT-Integrated Buckling Nanoneedles

This paper proposes a new technique for real-time single cell stiffness measurement using lead zirconate titanate (PZT)-integrated buckling nanoneedles. The PZT and the buckling part of the nanoneedle have been modelled and validated using the ABAQUS software. The two parts are integrated together to function as a single unit. After calibration, the stiffness, Young’s modulus, Poisson’s ratio and sensitivity of the PZT-integrated buckling nanoneedle have been determined to be 0.7100 N·m⁻¹, 123.4700 GPa, 0.3000 and 0.0693 V·m·N⁻¹, respectively. Three Saccharomyces cerevisiae cells have been modelled and validated based on compression tests. The average global stiffness and Young’s modulus of the cells are determined to be 10.8867 ± 0.0094 N·m⁻¹ and 110.7033 ± 0.0081 MPa, respectively. The nanoneedle and the cell have been assembled to measure the local stiffness of the single Saccharomyces cerevisiae cells The local stiffness, Young’s modulus and PZT output voltage of the three different size Saccharomyces cerevisiae have been determined at different environmental conditions. We investigated that, at low temperature the stiffness value is low to adapt to the change in the environmental condition. As a result, Saccharomyces cerevisiae becomes vulnerable to viral and bacterial attacks. Therefore, the proposed technique will serve as a quick and accurate process to diagnose diseases at early stage in a cell for effective treatment.

Effect of Acetylcysteine on Experimental Corneal Wounds in Dogs

The effects of 3, 10 and 20% concentrations of acetylcysteine on experimental corneal wound healing in dogs were evaluated. Experimental corneal wounds were induced surgically, up to the depth of the anterior third of the stroma, in both eyes of 18 dogs. One of the eyes was treated topically with 0.9% NaCl solution three times a day. The contralateral eye was treated topically with acetylcysteine (3, 10 and 20% concentrations) in each of 6 cases separately. Corneal wounds were measured by fluorescein staining every day. The mean time of healing in the 3% group was significantly different from control eyes (6.17 +/- 1.94 days). It was 7.19 +/- 0.75 days in the 20% group and 7 +/- 2 days in the 10% group. The last two groups were not significantly different from the controls (9.67 +/- 3.01 days and 8.17 +/- 3.60 days, respectively).

Varied prevalence of Borna disease virus infection in Arabic, thoroughbred and their cross-bred horses in Iran

Borna disease virus (BDV) naturally infects horses and sheep and induces progressive poliomeningoencephalomyelitis. Here, BDV recombinant proteins of the first open reading frame (ORF-I; coding for p40 nucleoprotein) and the second ORF-II (coding for p24 polymerase cofactor) were immunoblotted with plasma derived from 72 healthy (28 Arabic, 17 thoroughbred and 27 cross-bred) race horses at Tehran in Iran to detect anti-BDV antibodies. In addition, their peripheral blood mononuclear cells (PBMCs) were also examined for BDV RNA by a nested reverse transcriptase-polymerase chain reaction (RT-PCR) at ORF-II. The prevalence of BDV antibodies and/or RNA was 41.2% in Arabic, 23.5% in thoroughbred, and 33.3% in cross-bred horses, but only 17.9, 5.9, and 11.1% of them, respectively, showed positive signals for both BDV antibodies and RNA. Especially, cross-bred horses showed a higher prevalence for BDV RNA, which was detected only in females. In addition, significantly higher prevalence for BDV RNA was observed in Arabic males and thoroughbred females. The BDV prevalence did not increase with aging of the horse. Sequencing at the region of BDV derived from Iranian horses revealed a slight difference from those of Japanese horse- and European horse-derived BDVs even in the amino acid residues, although those in the three groups of Iranian horses were quite similar. Thus, the varied prevalence of BDV was observed with the horse strain or sex in Iranian horses, although BDV sequences were very similar among all three groups in Iran compared with those derived from other countries.