Non-Embedded Silver Nanowires/Antimony-Doped Tin Oxide/Polyethylenimine Transparent Electrode for Non-Fullerene Acceptor ITO-Free Inverted Organic Photovoltaics

Indium tin oxide (ITO)-free solution-processed transparent electrodes are an essential component for the low-cost fabrication of organic optoelectronic devices. High-performance silver nanowires (AgNWs) ITO-free inverted organic photovoltaics (OPVs) usually require a AgNWs-embedded process. A simple cost-effective roll-to-roll production process of inverted ITO-free OPVs with AgNWs as a bottom transparent electrode requires solution-based thick metal oxides as carrier-selective contacts. In this reported study, we show that a solution-processed antimony-doped tin oxide (ATO)/polyethylenimine (PEI) electron-selective contact incorporated on the top of non-embedded AgNWs provides a high-performance ITO-free bottom electrode for non-fullerene acceptor (NFA) inverted OPVs.

Synthesis of trisubstituted ureas by a multistep sequence utilizing recyclable magnetic reagents and scavengers

Unprecedented magnetic borohydride exchange (mBER), magnetic Wang aldehyde (mWang) and magnetic amine resins were prepared from highly magnetic polymer-coated cobalt or iron nanoparticles. Microwave irradiation was used to obtain excellent degrees of functionalization (>95 %) and loadings (up to 3.0 mmol  g(-1)) in short reaction times of 15 min or less. A small library of ureas and thioureas was synthesized by the exclusive application of these magnetic resins. As a first step, a reductive amination of aromatic and aliphatic aldehydes was carried out with mBER. The excess of primary amine needed to complete the reaction was subsequently scavenged selectively by mWang. Simple magnetic decantation from the resins resulted in secondary amines in good to excellent yields and purities. The used magnetic resins were efficiently regenerated and reused for the next run. In a second step, the secondary amines were converted to trisubstituted (thio)ureas in excellent yields and purities by stirring with an excess of iso(thio)cyanate, which was scavenged by addition of the magnetic amine resin after completion of the reaction. The whole reaction sequence is carried out without any purification apart from magnetic decantation; moreover, conventional magnetic stirring can be used as opposed to the vortexing required for polystyrene resins.

Persistence of engineered nanoparticles in a municipal solid-waste incineration plant

More than 100 million tonnes of municipal solid waste are incinerated worldwide every year. However, little is known about the fate of nanomaterials during incineration, even though the presence of engineered nanoparticles in waste is expected to grow. Here, we show that cerium oxide nanoparticles introduced into a full-scale waste incineration plant bind loosely to solid residues from the combustion process and can be efficiently removed from flue gas using current filter technology. The nanoparticles were introduced either directly onto the waste before incineration or into the gas stream exiting the furnace of an incinerator that processes 200,000 tonnes of waste per year. Nanoparticles that attached to the surface of the solid residues did not become a fixed part of the residues and did not demonstrate any physical or chemical changes. Our observations show that although it is possible to incinerate waste without releasing nanoparticles into the atmosphere, the residues to which they bind eventually end up in landfills or recovered raw materials, confirming that there is a clear environmental need to develop degradable nanoparticles.

Physical defect formation in few layer graphene-like carbon on metals: influence of temperature, acidity, and chemical functionalization

A systematical examination of the chemical stability of cobalt metal nanomagnets with a graphene-like carbon coating is used to study the otherwise rather elusive formation of nanometer-sized physical defects in few layer graphene as a result of acid treatments. We therefore first exposed the core-shell nanomaterial to well-controlled solutions of altering acidity and temperature. The release of cobalt into these solutions over time offered a simple tool to monitor the progress of particle degradation. The results suggested that the oxidative damage of the graphene-like coatings was the rate-limiting step during particle degradation since only fully intact or entirely emptied carbon shells were found after the experiments. If ionic noble metal species were additionally present in the acidic solutions, the noble metal was found to reduce on the surface of specific, defective particles. The altered electrochemical gradients across the carbon shells were however not found to lead to a faster release of cobalt from the particles. The suggested mechanistic insight was further confirmed by the covalent chemical functionalization of the particle surface with chemically inert aryl species, which leads to an additional thickening of the shells. This leads to reduced cobalt release rates as well as slower noble metal reduction rates depending on the augmentation of the shell thickness.

Magnetic switching of optical reflectivity in nanomagnet/micromirror suspensions: colloid displays as a potential alternative to liquid crystal displays

Two-particle colloids containing nanomagnets and microscale mirrors can be prepared from iron oxide nanoparticles, microscale metal flakes and high-density liquids stabilizing the mirror suspension against sedimentation by matching the constituent's density. The free Brownian rotation of the micromirrors can be magnetically controlled through an anisotropic change in impulse transport arising from impacts of the magnetic nanoparticles onto the anisotropic flakes. The resulting rapid mirror orientation allows large changes in light transmission and switchable optical reflectivity. The preparation of a passive display was conceptually demonstrated through colloid confinement in a planar cavity over an array of individually addressable solenoids and resulted in 4 x 4 digit displays with a reaction time of less than 100 ms.

FESCC survey on accreditation and post-graduate training in clinical chemistry in European countries. Federation of European Societies of Clinical Chemistry

Promotion of the professional growth and development of specialists in the field of clinical chemistry in European countries, and harmonisation of quality assessment and accreditation procedures are listed among the main goals and activities of Federation of European Societies of Clinical Chemistry (FESCC), according to its 1999-2000 strategic plan. The European countries that are members of the European Union are in the process of establishing the "European Register for Clinical Chemists", based on minimum standards of education, training and experience as defined by the European Communities Confederation of Clinical Chemists (EC4). Many other European countries would like to adapt their system of professional education to this model. Data on post-graduate training in EC4 FESCC members have already been gathered in 1998. However, at the present time, there is no detailed knowledge of pre- and post-graduate professional education of specialists in clinical chemistry in the non-EC4 European countries. FESCC launched a survey in July 1998 in order to gather this information with the hope to start a database about existing systems. All FESCC members received the same questionnaire on accreditation (seven questions) and non-EC4 FESCC members received an additional questionnaire with 11 questions related to post-graduate training in clinical chemistry. The response rate of the 35 FESCC member countries was 93% from the 15 EC4 members (14 responses/15 countries) and 80% from the 20-non-EC4 (16 responses/20 countries). The heterogeneity of the data on post-graduate training in clinical chemistry indicates that a great effort will be needed before harmonisation is reached. These results, however, will provide an interesting basis for further discussion and promotion of post-graduate training in clinical chemistry. The data provided on accreditation show that the total number of accredited laboratories was relatively low in EC4 countries and even lower in non-EC4 members. It was not surprising to see that the number of accredited laboratories was the highest in the two countries which started accreditation the earliest (i.e. Sweden and UK, 1992). This situation, however, is changing at a fast rate in most countries and the number of the accredited sites is expected to increase rapidly in the next few years.

Rapid detection of Candida albicans in clinical samples by DNA amplification of common regions from C. albicans-secreted aspartic proteinase genes

Laboratory diagnosis based on genomic amplification methods such as PCR may provide an alternative and more sensitive method than conventional culture for the early detection of deep-seated candidiasis, an increasing cause of morbidity and mortality among immunocompromised patients. A novel method of DNA extraction from clinical samples based on treatment with proteinase K and isolation of DNA on a silica membrane was developed. The targets used for DNA amplification were the Candida albicans-secreted aspartic proteinase (SAP) genes, a multiple-gene family of at least seven members in C. albicans. A single pair of primers was designed in order to detect six of these SAP genes and, subsequently, to increase the sensitivity of the test. Detection of the PCR product by enzyme-linked immunosorbent assay was found to be as sensitive as Southern blotting with an SAP-labeled probe. The sensitivity of the assay was 1 cell/ml from serially diluted Candida cultures and 1 to 4 cells/ml from seeded blood specimens. The sensitivity and specificity of the present assay were tested in a retrospective study performed blindly with 156 clinical samples and were 100 and 98%, respectively, compared with the results of culture. For the subset of blood culture samples (n = 124), the sensitivity and the specificity were 100%. The two false-positive PCR samples came from patients treated with azole antifungal agents, indicating that PCR was probably able to detect damaged organisms that could not be recovered by culture.

Laboratories in the new Swiss health care system

The objectives of the health reforms introduced in 1994 include universal coverage and cost containment. With these reforms, a new uniform for schedule and standards for laboratories have been introduced. The impact of these reforms is yet to be realized. It is predicted that with the imposition of new standards, many laboratories based in physicians' offices will disappear. Standards will also require more scientists and physicians trained in laboratory medicine.

Rapid detection and identification of Candida albicans and Torulopsis (Candida) glabrata in clinical specimens by species-specific nested PCR amplification of a cytochrome P-450 lanosterol-alpha-demethylase (L1A1) gene fragment

PCR of a Candida albicans cytochrome P-450 lanosterol-alpha-demethylase (P450-L1A1) gene segment is a rapid and sensitive method of detection in clinical specimens. This enzyme is a target for azole antifungal action. In order to directly detect and identify the clinically most important species of Candida, we cloned and sequenced 1.3-kbp fragments of the cytochrome P450-L1A1 genes from Torulopsis (Candida) glabrata and from Candida krusei. These segments were compared with the published sequences from C. albicans and Candida tropicalis. Amplimers for gene sequences highly conserved throughout the fungal kingdom were first used; positive PCR results were obtained for C. albicans, T. glabrata, C. krusei, Candida parapsilosis, C. tropicalis, Cryptococcus neoformans, and Trichosporon beigelii DNA extracts. Primers were then selected for a highly variable region of the gene, allowing the species-specific detection from purified DNA of C. albicans, T. glabrata, C. krusei, and C. tropicalis. The assay sensitivity as tested for C. albicans in seeded clinical specimens such as blood, peritoneal fluid, or urine was 10 to 20 cells per 0.1 ml. Compared with results obtained by culture, the sensitivity, specificity, and efficiency of the species-specific nested PCR tested with 80 clinical specimens were 71, 95, and 83% for C. albicans and 100, 97, and 98% for T. glabrata, respectively.

Detection of surgical pathogens by in vitro DNA amplification. Part I. Rapid identification of Candida albicans by in vitro amplification of a fungus-specific gene

The management of candidemia and disseminated candidiasis depends on rapid, unambiguous identification of Candida. Such identification is retarded by the slow growth of Candida from clinical specimens. Administration of effective but potentially toxic antifungal therapy is often withheld pending identification. To circumvent this slow growth and thus to expedite diagnosis and therapy, the polymerase chain reaction (PCR) was used to amplify a segment of fungal DNA coding for the cytochrome P450L1A1 (lanosterol-14 alpha-demethylase) in vitro. The technique provides unambiguous evidence of C. albicans in as few as 6 hours with a detection threshold of 10 organisms in a 100 mu specimen. Clinical specimens of urine (n = 4), sputum (n = 6), wound fluid (n = 1, and blood (n = 2) were collected from patients, and C. albicans was conventionally documented at these sites; in each case, PCR was confirmed. Of 17 additional specimens that were culture negative, PCR suggested the presence of yeast in two of the specimens. PCR-based detection of surgical pathogens may have broad application in rapid screening for the presence of organisms either indigenous to a particular surgical intensive care unit or peculiar to selected patient populations.

Potentiation of the antagonistic effect of ACTH11-24 on steroidogenesis by synthesis of covalent dimeric conjugates

Covalent dimerization of the adrenocorticotropin fragment ACTH11-24 increases its antagonistic potency on the ACTH-induced steroidogenesis in isolated bovine fasciculata/reticularis cells by 3 orders of magnitude when the C-termini are linked via a 10 A long spacer. This strong potentiation, probably mediated by cross-linking of the receptors, was shown to be dependent on the point of attachment of the monomeric fragment to the spacer, thus providing information about the position of the binding site in the hormonal segment and about the distance of the receptors on the cell surface.

Establishing the psychiatric liaison nurse role: collaboration with the nurse administrator

By helping patients, families, the hospital staff deal with the emotional effects of illness, the psychiatric liaison nurse plays a significant role in patients' healing. Since this type of role may be new to the organization, the psychiatric nurse and the nursing administrator must work in tandem to ensure successful role development and entry into the hospital system, both of which are crucial to the effectiveness of the liaison nurse. In our clinical experience, these issues need careful consideration and attention by both nurse administrators and psychiatric liaison nurses. We have attempted to provide practical considerations for facilitating the success of a psychiatric liaison nurse in the hospital system and justifying the value of this role.

Isolation and separation of toad bladder epithelial cells

The epithelium of the urinary bladder of Bufo marinus is composed of 5 cell types, i.e., granular (Gr), mitochondria-rich (MR) and goblet (G) cells which face the urinary lumen, microfilament-rich (MFR) and undifferentiated cells (Un) located basally. The epithelium was dissociated by collagenase and EGTA treatment. Fractionation of dispersed cells by isopycnic centrifugation on dense serum albumin solutions yielded 4 fractions: (i) a very light fraction (p approximately equal to 1.025) enriched in MR and MFR cells; (ii) a light fraction (p approximately equal to 1.045) enriched in vacuolated Gr cells; (iii) a heavy fraction (p approximately equal to 1.065) composed essentially of aggregated Gr cells, and (iv) a pellet (p approximately equal to 1.085) enriched in G and undifferentiated cells. Recoveries were based on cell counts and DNA measurements. DNA content per cell was 13.2 pg +/- 0.9 (n = 37). From 1 g fresh tissue, 62 +/- 5 x 10(6) (n = 10) cells were recovered before isopycnic centrifugation of which about 70% excluded Trypan blue. After centrifugation, 90 to 95% of the cells excluded the vital dye and approximately 3(9) x 10(6) cells were recovered from the gradient. Cell metabolism in each fraction was estimated by oxygen consumption measurements in absence or presence of ouabain, acetazolamide, and dinitrophenol. The consumption measurements in absence or presence of ouabain, acetazolamide, and dinitrophenol. The consumption was threefold higher in the very light and light fractions when compared to the heavy and pellet fractions. Ouabain sensitive oxygen consumption (QO2) represented 12 to 35% of the total O2 consumption depending on the cell fraction, and acetazolamide sensitive QO2 varied from -0.8% in the heavy fractions to 20% in the lighter fractions. DNP increased QO2 in all fractions by 20 to 50%. Finally, the cells were able to reaggregate and form junctional complexes upon addition of calcium to the medium.

Microfilament-rich cells in the toad bladder epithelium

Basal cells of the bladder epithelium of Bufo marinus have been found heterogenous and consist of microfilament-rich cells (MFR-cell) and undifferentiated cells (Un-cell). The MFR-cell, which represents approximately 20% of the epithelial cell population, lies between the epithelial layer lining the urinary space and the basement membrane; it extends under several epithelial cells by processes of varying widths and lengths which contact, via desmosomes, other MFR-cells, as well as cells in the superficial layer, i.e., granular and mitochondria-rich cells. The cytoplasm of MFR-cell is filled with intermediate filaments arranged in bundles which run parallel to the plane of the epithelium and no dense granules, typical of granular cells, have been detected. Strong immunofluorescence for actin is associated with cells which occupy the same basal position as MFR-cells. Undifferentiated cells have no contact via desmosomes with adjacent cells and their cytoplasm is filled with free ribosomes; they lack bundles of intermediate filaments and possess no specialized organelles. After a 4-hr pulse of 3H-thymidine, 1.5% of epithelial cells incorporate thymidine into nuclear DNA, out of which 3/4 are basally and 1/4 are apically located. Identification of cell types by electron microscopy reveals that approximately 10% of undifferentiated basal cells are labeled, whereas less than 0.1% of granular cells and no MFR-cells incorporate 3H-thymidine into DNA. When dissociated from the epithelium and separated by isopycnic centrifugation, MFR-cells possess a mean buoyant density of approximately 1.025, cosediment with mitochondria-rich cells and exhibit a strong immunofluorescence for actin. The function of MFR-cells remains unknown; however, they may play a role in cell coupling and responses to hormonal and physical factors.

Thyroxine and Na+ transport in toad: role in transition from poikilo- to homeothermy

The effects of thyroxine (T4) on Na+ transport, oxygen consumption (QO2), and Na+-K+-ATPase activity were studied in the urinary bladder and liver of the toad Bufo marinus. In the bladder, T4 in vitro (10(-8) to 10(-6) M) had no significant effect on these parameters during 15 h of incubation. When injected intraperitoneally (approximately 20 microgram/(kg body wt.day) for 6 days), T4 lowered base-line, short-circuit current by 62% (P less than 0.0025) and potential difference by 37% (P less than 0.001), increasing tissue resistance by 40% (P less than 0.02). T4 depressed QO2/DNA (-25%, P less than 0.05) with no significant effect on Na+-K+-ATPase activity. In liver, T4 increased the recovery per cell DNA of mitochondrial proteins by 32% (P less than 0.025), corresponding to an increased QO2 (stage IV) of isolated mitochondria per cell DNA (+54%, P less than 0.01). There was no significant effect on Na+-K+-ATPase activity. These results suggest that, unlike its function in the rat, T4 in the toad does not regulate cellular thermogenesis by inducing Na+-K+-ATPase. This major difference could account at least in part for the transition from poikilothermy to homeothermy. In addition, T4 has a distinct inhibitory effect on Na+ transport in the urinary bladder, which suggests an antagonism to the action of aldosterone.

Thyroid hormone-aldosterone interaction on Na+ transport in toad bladder

Repeated administration of thyroxine (T4) in vivo (2 microgram/100 g body wt for 6 days) lowered by 2.3 times (P less than 0.025, df = 18) the basal rate of Na+ transport measured by the short-circuit current (SCC) in vitro in the urinary bladder of the toad (Bufo marinus). This difference was not accounted for by a change in the plasma aldosterone concentration. Moreover the response of the SCC to aldosterone in vitro was markedly inhibited in bladders from T4-treated animals (P less than 0.001, df = 18). These findings raised the possibility of a direct interaction between thyroid hormone and aldosterone in the target cell. The effects of L-triiodothyronine (T3) and aldosterone were examined in vitro. T3 alone (60 nM) had no significant effect on the base-line SCC (deltamuA = -14 +/- 11 (SE) muA per hemibladder; P greater than 0.3, n = 10). By contrast, T3 (60 nM) inhibited the response of the SCC to aldosterone from 6 to 8 h after its addition (deltamuA = -98 +/- 19 muA per hemibladder; P less than 0.001, n = 10). The inhibition by T3 was present at 6 nM (P less than 0.01, n = 10) and became not significant at 0.6 nM. T3 had no significant effect on base-line or aldosterone-stimulated H+ transport. Thyroid hormone might therefore regulate the late response of the SCC to aldosterone at the level of its target cell.

Effects of 3'deoxyadenosine and actinomycin D on RNA synthesis in toad bladder: analysis of response to aldosterone

Previous studies have shown that aldosterone increases transepithelial active Na+ transport after a latent period of about 60 min and incorporation of 3H-uridine into polyadenylated RNA (poly(A)(+)RNA) (putatively poly(A)(+)mRNA) as early as 30 min after aldosterone addition. To assess the physiological importance of this pathway, the effects of 3'deoxyadenosine and actinomycin D were compared in studies on the urinary bladder of the toad Bufo marinus. 3'deoxyadenosine (30 microgram/ml) only partially, though significantly, inhibited the aldosterone-dependent increase in Na+ transport measured as short-circuit current (scc). The incorporation of 3H-uridine into poly(A) (+)RNA was inhibited by 70 to 80%. In contrast, Actinomycin D (2 microgram/ml) totally inhibited the aldosterone-dependent increase in scc, and the incorporation of 3H-uridine into poly(A)(+)RNA by 68 to 75%. 3'deoxyadenosine or actinomycin D alone had no significant effects on baseline scc, while inhibiting poly(A)(+)RNA to the same extent. The differential effects of deoxyadenosine and actinomycin on aldosterone-dpendent Na+ transport may be related to their different sites of action on RNA synthesis: both drugs inhibited, to a similar extent, cytoplasmic poly(A)(+)mRNA: however, 3'deoxyadenosine, in contrast to Actinomycin D, failed to inhibit poly(A)(-)RNA, sedimenting between 4S and 18S (putatively poly(A)(-)mRNA). We conclude that the mineralocorticoid action of aldosterone during the first three hours depends on the synthesis of both poly(A)(+)mRNA and poly(A)(-)mRNA.

Kinetics of Na+ uptake and transcellular transit by the pancreas

22Na uptake into strips of rabbit pancreas was measured for up to 10 min. The uptake curve was characterized by the presence of two plateaus separated by an inflexion point; a first "plateau" or an approximation of steady-state uptake was observed between 1 and 3 min; betwen 3 and 4 min the slope of the uptake curve increased again, finally decreasing to a new and higher steady-state uptake between 4 and 6 min. The data suggest that the first part of the uptake curve (from 0 to 3 min) represents uptake into most if not all cells, and the second part (from 3 to 10 min) represents the sum of "quasi" steady-state cellular uptake and of the equilibration of the ductal compartment in series with the cells. In this model a substantial delay (2.5-3.25 min) elapses between the filling of cellular and ductal compartments which is apparently of intracellular origin, implying restricted Na+ diffusion within the cytoplasm and an intracellular Na+ gradient. If this model is correct, then the mean transit time for Na+ across the whole organ should be approximately 3-4 min and be primarily the result of transcellular transit. The mean transit time for Na+ across the whole organ in vitro was measured and found to be 3.5 min on the average. The step that accounts for most of this time appears to be the transepithelial transit of Na+.