Advances on marine-derived natural radioprotection compounds: historic development and future perspective

Natural extracts and compounds from marine resources have gained intensive scientific and industry attention for radioprotective activities in the past ten years. However, the marine-derived radioprotectants have been studied against UV-rays, gamma (γ)-rays and X-rays for more than 30 years. This review aims to identify key marine-derived extracts/compounds and their modes of action studied for radioprotective activities from 1986 to 2019. A comprehensive survey was conducted to establish the trend in terms of the publications each year and the countries of origin. A total of 40 extracts and 34 natural compounds showing radioprotective activities against UV-rays, gamma (γ)-rays and X-rays were identified from a range of marine plants and animals. These extracts and compounds are broadly categorized into polysaccharides, phlorotannins, carotenoids and mycosporine-like amino acids (MAAs). Macroalgae and microalgae were found to be the dominant sources of polysaccharides, phlorotannins and carotenoids. MAAs were mainly identified in algae, sponges, sea cucumber and corals that showed significant UV-absorbing activities. A number of radioprotective mechanisms were shown by these compounds, predominantly free radicals scavenging, inhibition of apoptosis, UV-ray absorption and DNA damage-repair signaling pathways. While these bio-discoveries warrant further investigation and development of radioprotective therapeutics, however, the lack of clinical studies is a major obstacle to be tackled in the future.

Supplementary Information

The online version contains supplementary material available at 10.1007/s42995-021-00095-x.

Marine bioactives: from energy to nutrition

Microalgae have been evaluated as promising resource for biodiesel production, but algal biofuel production is not yet commercially viable, which reflects the high energy costs linked with cultivation, harvesting, and dewatering of algae. As crude oil processing declines, microalgae biorefineries are being considered for producing bioactives such as enzymes, proteins, omega-3 oils, pigments, recombinant products, and vitamins, to offset the costs of biofuel production. We believe that producing algal bioactives through advanced manufacturing pathways, encompassing a biorefinery approach, would be effective, profitable, and economical.

Release of encapsulated bioactives influenced by alginate viscosity under in-vitro gastrointestinal model

The physicochemical properties of alginate can affect the release profile of encapsulated bioactives, but this is poorly understood. The influence of alginate viscosity (low- A1, medium- A2 and high- A3) and molecular weight (kDa) on the release of encapsulated bioactives (seaweed and spirulina powder) was investigated in an in-vitro gastrointestinal (GSI) model. Beads encapsulated with A2 at 1% (w/v) have overall higher release of bioactives (protein, phlorotannins and antioxidants) but A3 at 0.5% (w/v) was able to release and absorb similar amount of bioactives with ~10% difference with A2. The relative release of protein, phlorotannins and antioxidant was 96%, 111% and 43% respectively from A2 in gastric digestion. In contrast, protein (165%) and phlorotannins (234%) release was highest from A3 in intestinal phase. These results establish the importance of physicochemical properties of the encapsulating matrix on water retention capacity and their interaction with bioactive material to release into the system.

Seaweed and seaweed-derived metabolites as prebiotics

Seaweeds and their bioactive compounds, particularly polysaccharides and phenolics can be regarded as great dietary supplements with gut health benefits and prebiotics. These components are resistant to digestion by enzymes present in the human gastrointestinal tract, also selectively stimulate the growth of beneficial gut bacteria and the production of fermentation products such as short chain fatty acids. Commonly, the health benefits of seaweed components are assessed by including them in an in vitro anaerobic fermentation system containing human fecal inocula that mimics the environment of the human large bowel. Regarding to the complex interactions between dietary components, gastrointestinal physiological processes, and gut microbiota are difficult to model in vitro. Consequently it is important to follow up the promising in vitro results with in vivo animal or human testing. The aim of this chapter is to have a comprehensive review on the application of seaweeds and seaweed-derived metabolites as prebiotics, and understand the trends, gaps and future directions of both scientific and industrial developments. This work contributes to develop and expand new platform of seaweed utilization for higher-value products, particularly to functional food and nutraceutical industries in order to serve the social demand for health awareness and support economic development.

Nano-immobilized cellulases for biomass processing with application in biofuel production

Several researches have focused on the enzymatic pretreatment of lignocellulose biomass to produce fermentable sugars that can lead to ethanol production thus facilitating pathways for sustainable biofuel production. Enzymes are fundamental to the pretreatment process, however, are required in larger quantities during pretreatment process thus influencing biofuel production cost. Immobilization of enzymes to a suitable support/matrix could enhance its stability, and reusability thus containing cost. This chapter focuses on developing an advanced technology for immobilizing enzymes to nanomaterials; variety of nanomaterials used for immobilization, nature of enzyme/protein nanomaterial interactions, methods of enzyme immobilization, and factors affecting mode of interaction for achieving hydrolysis of microcrystalline cellulose and natural cellulosic substrate. The binding of enzyme (94%) to a nanomaterial was established by spectroscopy techniques. The kinetics study, conducted at optimum pH (pH 4) and temperature (50°C for free and 60°C immobilized enzyme), exhibited improvement in immobilized enzyme properties. The immobilized enzyme retained up to 50% of its enzyme activity in five consecutive cycles. This chapter advocates the use of nano-immobilized enzymes in biomass hydrolysis for biofuel production.

Enrichment of Cellulosic Waste Hemp (Cannabis sativa) Hurd into Non-Toxic Microfibres

In this study a largely available lignocellulose feedstock hemp (Cannabis sativa), obtained as an industrial waste, was used for cellulose extraction. The extraction of cellulose microfibres from hemp biomass was conducted by alkaline treatment and an acidification process. The extracted cellulose microfibres were characterised using Fourier-transformed infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and X-ray diffraction (XRD). The viability of the study was determined by growing human fibroblasts on the preparation which resulted in being non-toxic; indicating its potential in preparing biological scaffolds. Upon enzymatic hydrolysis of the cellulose microfibre using cellulase from Trichoderma reesei, a maximum of 909 mg/g of reducing sugars were obtained, which endorses its suitability for biofuel production.

Omega-3 fatty acid production from enzyme saccharified hemp hydrolysate using a novel marine thraustochytrid strain

In this work, a newly isolated marine thraustochytrid strain, Schizochytrium sp. DT3, was used for omega-3 fatty acid production by growing on lignocellulose biomass obtained from local hemp hurd (Cannabis sativa) biomass. Prior to enzymatic hydrolysis, hemp was pretreated with sodium hydroxide to open the biomass structure for the production of sugar hydrolysate. The thraustochytrid strain was able to grow on the sugar hydrolysate and accumulated polyunsaturated fatty acids (PUFAs). At the lowest carbon concentration of 2%, the PUFAs productivity was 71% in glucose and 59% in the sugars hydrolysate, as a percentage of total fatty acids. Saturated fatty acids (SFAs) levels were highest at about 49% of TFA using 6% glucose as the carbon source. SFAs of 41% were produced using 2% of SH. This study demonstrates that SH produced from lignocellulose biomass is a potentially useful carbon source for the production of omega-3 fatty acids in thraustochytrids, as demonstrated using the new strain, Schizochytrium sp. DT3.

Suitability of magnetic nanoparticle immobilised cellulases in enhancing enzymatic saccharification of pretreated hemp biomass

BACKGROUND

Previous research focused on pretreatment of biomass, production of fermentable sugars and their consumption to produce ethanol. The main goal of the work was to economise the production process cost of fermentable sugars. Therefore, the objective of the present work was to investigate enzyme hydrolysis of microcrystalline cellulose and hemp hurds (natural cellulosic substrate) using free and immobilised enzymes. Cellulase from Trichoderma reesei was immobilised on an activated magnetic support by covalent binding and its activity was compared with that of the free enzyme to hydrolyse microcrystalline cellulose and hemp hurds on the basis of thermostability and reusability.

RESULTS

Up to 94% protein binding was achieved during immobilisation of cellulase on nanoparticles. Successful binding was confirmed using Fourier transform infrared spectroscopy (FTIR). The free and immobilised enzymes exhibited identical pH optima (pH 4.0) and differing temperature optima at 50°C and 60°C, respectively. The K M values obtained for the free and immobilised enzymes were 0.87 mg/mL and 2.6 mg/mL respectively. The immobilised enzyme retained 50% enzyme activity up to five cycles, with thermostability at 80°C superior to that of the free enzyme. Optimum hydrolysis of carboxymethyl cellulose (CMC) with free and immobilised enzymes was 88% and 81%, respectively. With pretreated hemp hurd biomass (HHB), the free and immobilised enzymes resulted in maximum hydrolysis in 48 h of 89% and 93%, respectively.

CONCLUSION

The current work demonstrated the advantages delivered by immobilised enzymes by minimising the consumption of cellulase during substrate hydrolysis and making the production process of fermentable sugars economical and feasible. The activity of cellulase improved as a result of the immobilisation, which provided a better stability at higher temperatures. The immobilised enzyme provided an advantage over the free enzyme through the reusability and longer storage stability properties that were gained as a result of the immobilisation.

The developmental profile

We describe the Developmental Profile and the development of the instrument, the theory on which it is based, and the manner in which information is collected, interpreted, and used in clinical practice. We present the results of the psychometric research that has been performed to date. Finally, we examine the extent to which this method is in accordance with recent insights within the field of personality diagnostics.

The developmental profile: preliminary results on interrater reliability and construct validity

This study presents the preliminary results of research into the interrater reliability and construct validity of the Developmental Profile (DP). In the DP a number of developmental lines, such as Object-Relations, Self-Images, and Problem-Solving Capacities, are assessed and classified according to the level of functioning. A total of 108 profiles were assessed, drawn from three different categories of patients. The weighted kappa values for interrater reliability were sufficient. On the adaptive level, but also on the maladaptive levels Symbiosis and Resistance, significant differences were found between psychiatric patients, "normal controls" (dental patients) and somatic patients. No differences were recorded between the latter two groups. The conclusion is that the DP is a promising instrument, of which the reliability and validity has to be further investigated in order to contribute to scientific support for psychodynamic theory formation.

Cardiovascular and neuroendocrine responses during acute stress induced by different types of dental treatment

Patients demonstrate a physiological stress response during dental checkups and treatment. Local anesthesia and tooth extraction activate the adrenal cortex to produce cortisol. Changes in adrenaline or noradrenaline concentrations have been reported in plasma and urine after drilling and filling or extraction, and anticipation of a dental checkup increases blood pressure. Both diastolic and systolic blood pressure rise still further during restorative treatment without local anaesthesia and during extraction. In a study by the same authors, no significant changes in blood pressure were observed during restorative treatment with local anaesthesia, which suggests that the pain experienced by the patient contributes to the rise in blood pressure. Dentists must be aware that this increased blood pressure may induce cardiovascular complications during dental therapy.