1
|
Demulsification of Pickering Emulsions by Chemical Dissolution of Stabilizers. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2024. [PMID: 38787896 DOI: 10.1021/acs.langmuir.4c00514] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/26/2024]
Abstract
Demulsification of particle-stabilized oil-in-water emulsions is crucial in diverse fields such as treatment of produce water, recovery of valuable products of Pickering emulsion catalysis, and so on. In this work, we investigated a facile method for destabilizing emulsions by dissolving stabilizer particles by the introduction of acid or base. Nanoellipsoidal hematite-stabilized decane-in-water emulsions are destabilized by dissolving hematite with oxalic or hydrochloric acid in situ. Time required for complete demulsification decreased as the acid concentration is increased. The demulsification time is typically on the order of a few hours for the chosen protocol. Similarly, the silica-stabilized decane-water emulsion is demulsified by the addition of aqueous sodium hydroxide. Demulsification kinetics is presented as the temporal change of the emulsion volume with time. Emulsion volume decreases in two stages: an initial slow decrease followed by an exponential decrease. Scanning electron microscopy analysis shows that the stabilizing particles are completely dissolved and recrystallized as salts of respective kinds. An estimate of the desorption free energy suggests that particle size should be reduced to a few nanometers for inducing destabilization. This work describes a facile method to destabilize oil-in-water emulsion, and it can be generalized to any other particle-stabilized emulsions by choosing appropriate chemical reagent for dissolution.
Collapse
|
2
|
A systematic review on enhancement strategies in biochar-based remediation of polycyclic aromatic hydrocarbons. CHEMOSPHERE 2024; 355:141796. [PMID: 38537711 DOI: 10.1016/j.chemosphere.2024.141796] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/20/2023] [Revised: 12/25/2023] [Accepted: 03/23/2024] [Indexed: 04/07/2024]
Abstract
Polycyclic aromatic hydrocarbons (PAHs) are pervasive ecological pollutants produced essentially during the inadequate burning of organic materials. PAHs are a group of different organic compounds that are made out of various aromatic rings. PAHs pose a serious risk to humans and aquatic ecosystems because of their mutagenic and carcinogenic properties. In this way, there is a critical prerequisite to utilizing successful remediation strategies and methods to limit the dangerous effect of these pollutants on the ecosystem. Biochar has believed of intriguing properties such as simple manufacturing operations and more affordable and more productive materials. Biochar is a sustainable carbonaceous material that has an enormous surface area with bountiful functional groups and pore structure, which has huge potential for the remediation of toxic pollutants. This review emphasizes the occurrence, development, and fate of toxic PAHs in the environment. In the present review, the properties and role of biochar in the removal of PAHs were illustrated, and the influencing factors and an efficient key mechanism of biochar for the remediation of PAHs were discussed in detail. Various surface modification methods can be utilized to improve the biochar properties with the magnetization process; the advancements of modified biochar are pointed out in this review. Finally, the constraints and prospects for the large-scale application of biochar in the remediation of toxic pollutants are highlighted.
Collapse
|
3
|
Current strategies on bioremediation of personal care products and detergents: Sustainability and life cycle assessment. CHEMOSPHERE 2024; 354:141698. [PMID: 38490608 DOI: 10.1016/j.chemosphere.2024.141698] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/05/2023] [Revised: 02/12/2024] [Accepted: 03/11/2024] [Indexed: 03/17/2024]
Abstract
The increased use of personal care products and detergents in modern society has raised concerns about their potential adverse effects on the environment. These products contain various chemical compounds that can persist in water bodies, leading to water pollution and ecological disturbances. Bioremediation has emerged as a promising approach to address these challenges, utilizing the natural capabilities of microorganisms to degrade or remove these contaminants. This review examines the current strategies employed in the bioremediation of personal care products and detergents, with a specific focus on their sustainability and environmental impact. This bioremediation is essential for environmental rejuvenation, as it uses living organisms to detergents and other daily used products. Its distinctiveness stems from sustainable, nature-centric ways that provide eco-friendly solutions for pollution eradication and nurturing a healthy planet, all while avoiding copying. Explores the use of microbial consortia, enzyme-based treatments, and novel biotechnological approaches in the context of environmental remediation. Additionally, the ecological implications and long-term sustainability of these strategies are assessed. Understanding the strengths and limitations of these bioremediation techniques is essential for developing effective and environmentally friendly solutions to mitigate the impact of personal care products and detergents on ecosystems.
Collapse
|
4
|
Progress in environmental monitoring and mitigation strategies for herbicides and insecticides: A comprehensive review. CHEMOSPHERE 2024; 352:141421. [PMID: 38360415 DOI: 10.1016/j.chemosphere.2024.141421] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/24/2023] [Revised: 01/24/2024] [Accepted: 02/07/2024] [Indexed: 02/17/2024]
Abstract
Herbicides and insecticides are pervasively applied in agricultural sector to increase the yield by controlling or eliminating bug vermin and weeds. Although, resistance development occurs, direct and indirect impact on human health and ecosystem is clearly visible. Normally, herbicides and pesticides are water soluble in nature; accordingly, it is hard to decrease their deadliness and to dis-appear them from the environment. They are profoundly specific, and considered as poisonous to various peoples in agricultural and industrial work places. In order to substantially reduce the harmful impacts, it is crucial to thoroughly examine the detection and mitigation measures for these compounds. The primary objective of this paper is to provide an overview of various herbicide and pesticide detection techniques and associated remedial techniques. A short summary on occurrence and harmful effects of herbicides/insecticides on ecosystem has been included to the study. The conventional and advanced, rapid techniques for the detection of insecticides and herbicides were described in detail. A detailed overview on several mitigation strategies including advanced oxidation, adsorption, electrochemical process, and bioremediation as well as the mechanism behind the strategic approaches to reduce the effects of growing pesticide pollution has been emphasized. Regardless of the detection techniques and mitigation strategies, the recent advances employed, obstacles, and perspectives have been discussed in detail.
Collapse
|
5
|
Recent insights into mechanism of modified bio-adsorbents for the remediation of environmental pollutants. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2023; 339:122720. [PMID: 37839681 DOI: 10.1016/j.envpol.2023.122720] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/18/2023] [Revised: 10/01/2023] [Accepted: 10/08/2023] [Indexed: 10/17/2023]
Abstract
Rapid industrialization has exacerbated the hazard to health and the environment. Wide spectrums of contaminants pose numerous risks, necessitating their disposal and treatment. There is a need for further remediation methods since pollutant residues cannot be entirely eradicated by traditional treatment techniques. Bio-adsorbents are gaining popularity due to their eco-friendly approach, broad applicability, and improved functional and surface characteristics. Adsorbents that have been modified have improved qualities that aid in their adsorptive nature. Adsorption, ion exchange, chelation, surface precipitation, microbial uptake, physical entrapment, biodegradation, redox reactions, and electrostatic interactions are some of the processes that participate in the removal mechanism of biosorbents. These processes can vary depending on the particular biosorbent and the type of pollutants being targeted. The systematic review focuses on the many modification approaches used to remove environmental contaminants. Different modification or activation strategies can be used depending on the type of bio-adsorbent and pollutant to be remediated. Physical activation procedures such as ultrasonication and pyrolysis are more commonly used to modify bio-adsorbents. Ultrasonication process improves the adsorption efficiency by 15-25%. Acid and alkali modified procedures are the most effective chemical activation strategies for adsorbent modification for pollution removal. Chemical modification increases the removal to around 95-99%. The biological technique involving microbial culture is an emerging field that needs to be investigated further for pollutant removal. A short evaluation of modified adsorbents with multi-pollutant adsorption capability that have been better eliminated throughout the adsorption process has been provided.
Collapse
|
6
|
Oil-in-Water Emulsions Stabilized by Hydrophilic Homopolymers. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2023; 39:13430-13440. [PMID: 37699434 DOI: 10.1021/acs.langmuir.3c00798] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/14/2023]
Abstract
Most of the polymeric emulsifiers have diblock and triblock copolymer architecture containing hydrophilic and hydrophobic domains. In this work, we show that hydrophilic homopolymers can be effective stabilizers of oil-in-water emulsions. Using polyethelyne oxide and poly(vinylpyrrolidone) as model hydrophilic homopolymers and n-decane and n-hexane as model nonpolar phases, we show that high-molecular weight polymers can stabilize emulsions over 24 h beyond a threshold concentration. We highlight the role of the molecular weight and concentration of the polymer in the stability of emulsions through kinetic measurements of emulsion volume, microscopic analysis, interfacial tension, and dilational rheology. We explain the mechanism of stabilization to stem from buoyancy-driven creaming of emulsion drops and film drainage and dilational elasticity of the interface in relation to the molecular weights and concentrations of polymers. This study demonstrates that water-soluble homopolymers can stabilize oil-in-water emulsions and open avenues for the use of eco-friendly biopolymers, which are inherently hydrophilic, as an alternative to synthetic emulsifiers.
Collapse
|
7
|
A biotechnological roadmap for decarbonization systems combined into bioenergy production: Prelude of environmental life-cycle assessment. CHEMOSPHERE 2023; 329:138670. [PMID: 37054843 DOI: 10.1016/j.chemosphere.2023.138670] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/10/2022] [Revised: 03/30/2023] [Accepted: 04/10/2023] [Indexed: 05/03/2023]
Abstract
Decarbonization has become a critical issue in recent years due to rising energy demands and diminishing oil resources. Decarbonization systems based on biotechnology have proven to be a cost-effective and environmentally benign technique of lowering carbon emissions. Bioenergy generation is an environmentally friendly technique for mitigating climate change in the energy industry, and it is predicted to play an important role in lowering global carbon emissions. This review essentially provides a new perspective on the unique biotechnological approaches and strategies based decarbonization pathways. Furthermore, the application of genetically engineered microbes in CO2 biomitigation and energy generation is particularly emphasized. The production of biohydrogen and biomethane via anaerobic digestion techniques has been highlighted in the perspective. In this review, role of microorganisms in bioconversion of CO2 into different types of bioproducts such as biochemical, biopolymers, biosolvents and biosurfactant was summarized. The current analysis, which includes an in-depth discussion of a biotechnology-based roadmap for the bioeconomy, provides a clear picture of sustainability, forthcoming challenges, and perspectives.
Collapse
|
8
|
Biodegradation of oil-contaminated aqueous ecosystem using an immobilized fungi biomass and kinetic study. ENVIRONMENTAL RESEARCH 2023; 220:115252. [PMID: 36632883 DOI: 10.1016/j.envres.2023.115252] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/30/2022] [Revised: 12/22/2022] [Accepted: 01/07/2023] [Indexed: 06/17/2023]
Abstract
Remediation of environmental oil pollution with the usage of fungal organisms has proven to be a successful cleanup bioremediation method for organic contaminants. To investigate the breakdown of oil pollutants in water environments, biosurfactant-producing fungi have been isolated from oil-polluted soil samples. 16s rRNA sequencing technique was performed to identify the fungal organism and phylogenetic tree has been constructed. A variety of biosurfactant screening tests have demonstrated the better biosurfactant producing ability of fungi. The emulsion's stability, which is essential for the biodegradation process, was indicated by the emulsification index of 68.48% and emulsification activity of 1.3. In the isolated biosurfactant, important functional groups such as amino groups, lipids, and sugars were found according to thin layer chromatography analysis with a maximum retention value of 0.85. A maximum oil degradation of around 64% was observed with immobilized beads within 12 days. The half-life, and degradation removal rate constant of 20.21 days and 0.03 day-1, respectively, have been determined by the degradation kinetic analysis. GCMS analysis confirmed the highly degraded hydrocarbons such as nonanoic acid and pyrrolidine. The immobilized fungi exhibit better oil biodegradability in aqueous solutions.
Collapse
|
9
|
Light-induced destabilisation of oil-in-water emulsions using light-active bolaform surfactants. SOFT MATTER 2023; 19:199-207. [PMID: 36503968 DOI: 10.1039/d2sm01207c] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
External stimuli-induced destabilisation of oil-in-water emulsions is of both fundamental and technological importance. In this work we synthesize light-active bolaform-type surfactants (LABSs) and show the preparation of decane-in-water emulsions over a range of surfactant and salt concentrations. Under ultraviolet (UV) illumination, LABSs undergo trans to cis isomerization affecting their interfacial activity. Therefore when stable emulsions stabilized by LABSs are exposed to UV light, they undergo partial destabilization. To induce interfacial flow, a small amount of volatile solvent (methanol, ethanol, tetrahydrofuran, etc.) is added at the emulsification stage and in this case complete phase separation is observed. This study demonstrates a facile route to induce destabilization of surfactant-stabilized emulsions using benign solvents and minimal use of energy (UV light) and this method could be of importance in wastewater treatment, enhanced oil recovery, protein separation, etc. where emulsion destabilization is desired.
Collapse
|
10
|
Sustainable production of biohydrogen from algae biomass: Critical review on pretreatment methods, mechanism and challenges. BIORESOURCE TECHNOLOGY 2022; 366:128187. [PMID: 36309177 DOI: 10.1016/j.biortech.2022.128187] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/23/2022] [Revised: 10/18/2022] [Accepted: 10/19/2022] [Indexed: 06/16/2023]
Abstract
The production of chemicals and energy from sustainable biomass with an important objective decreasing carbon impressions has recently become one of the key areas of attention. Algae biomass have been recognized and researched as a potential renewable biomass of biohydrogen production attributed to their limited multiplying time, fast growing qualities and ability of lipid accumulation. This review additionally envelops various key perspectives such as composition and properties of algae biomass and pretreatment strategies such as physical, chemical and biological methods adopted for the algae biomass. This review is mainly focused on pretreatment strategies which have been developed to enhance biohydrogen production. The present review deals with methods and mechanism, enzymes involved and factors influencing on biohydrogen production which help to grasp various bottlenecks, challenges and constraints. Finally, the significant progressions and economical perspective on improving biohydrogen yield because of the expansion of co-substrates and the current trends are examined.
Collapse
|
11
|
Review on biopolymers and composites - Evolving material as adsorbents in removal of environmental pollutants. ENVIRONMENTAL RESEARCH 2022; 212:113114. [PMID: 35331699 DOI: 10.1016/j.envres.2022.113114] [Citation(s) in RCA: 42] [Impact Index Per Article: 21.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/30/2021] [Revised: 03/03/2022] [Accepted: 03/10/2022] [Indexed: 06/14/2023]
Abstract
The presence of pollutants and toxic contaminants in water sources makes it unfit to run through. Though various conventional techniques are on deck, development of new technologies are vital for wastewater treatment and recycling. Polymers have been intensively utilized recently in many industries owing to their unique characteristics. Biopolymers resembles natural alternative to synthetic polymers that can be prepared by linking the monomeric units covalently. Despite the obvious advantages of biopolymers, few reviews have been conducted. This review focuses on biopolymers and composites as suitable adsorbent material for removing pollutants present in environment. The classification of biopolymers and their composites based on the sources, methods of preparation and their potential applications are discussed in detail. Biopolymers have the potentiality of substituting conventional adsorbents due to its unique characteristics. Biopolymer based membranes and effective methods of utilization of biopolymers as suitable adsorbent materials are also briefly elaborated. The mechanism of biopolymers and their membrane-based adsorption has been briefly reviewed. In addition, the methods of regeneration and reuse of used biopolymer based adsorbents are highlighted. The comprehensive content on fate of biopolymer after adsorption is given in brief. Finally, this review concludes the future investigations in recent trends in application of biopolymer in various fields in view of eco-friendly and economic perspectives.
Collapse
|
12
|
Sustainable strategy on microbial fuel cell to treat the wastewater for the production of green energy. CHEMOSPHERE 2022; 290:133295. [PMID: 34914952 DOI: 10.1016/j.chemosphere.2021.133295] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/19/2021] [Revised: 12/07/2021] [Accepted: 12/11/2021] [Indexed: 06/14/2023]
Abstract
Microbial fuel cell (MFC) is one of the promising alternative energy systems where the catalytic conversion of chemical energy into electrical energy takes places with the help of microorganisms. The basic configuration of MFC consists of three major components such as electrodes (anode and cathode), catalyst (microorganism) and proton transport/exchange membrane (PEM). MFC classified into four types based on the substrate utilized for the catalytic energy conversion process such as Liquid-phase MFC, Solid-phase MFC, Plant-MFC and Algae-MFC. The core performance of MFC is organic substrate oxidation and electron transfer. Microorganisms and electrodes are the key factors that decide the efficiency of MFC system for electricity generation. Microorganism catalysis degradation of organic matters and assist the electron transfer to anode surface, the conductivity of anode material decides the rate of electron transport to cathode through external circuit where electrons are reduced with hydrogen and form water with oxygen. Not limited to electricity generation, MFC also has diverse applications in different sectors including wastewater treatment, biofuel (biohydrogen) production and used as biosensor for detection of biological oxygen demand (BOD) of wastewater and different contaminants concentration in water. This review explains different types of MFC systems and their core performance towards energy conversion and waste management. Also provides an insight on different factors that significantly affect the MFC performance and different aspects of application of MFC systems in various sectors. The challenges of MFC system design, operations and implementation in pilot scale level and the direction for future research are also described in the present review.
Collapse
|
13
|
Recent advances and sustainable development of biofuels production from lignocellulosic biomass. BIORESOURCE TECHNOLOGY 2022; 344:126203. [PMID: 34710606 DOI: 10.1016/j.biortech.2021.126203] [Citation(s) in RCA: 48] [Impact Index Per Article: 24.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/26/2021] [Revised: 10/16/2021] [Accepted: 10/20/2021] [Indexed: 06/13/2023]
Abstract
Many countries in the world are facing the demand for non-renewable fossil fuels because of overpopulation and economic boom. To reduce environmental pollution and zero carbon emission, the conversion of biomass into biofuels has paid better attention and is considered to be an innovative approach. A diverse raw material has been utilized as feedstock for the production of biofuel, depending on the availability of biomass, cost-effectiveness, and their geographic location. Among the different raw materials, lignocellulosic biomass has fascinated many researchers around the world. The current review discovers the potential application of lignocellulosic biomass for the production of biofuels. Various pretreatment methods have been widely used to increase the hydrolysis rate and accessibility of biomass. This review highlights recent advances in pretreatment methodologies for the enhanced production of biofuels. Detailed descriptions of the mechanism of biomass processing pathway, optimization, and modeling study have been discussed.
Collapse
|
14
|
A review on recent advancements in recovery of valuable and toxic metals from e-waste using bioleaching approach. CHEMOSPHERE 2022; 287:132230. [PMID: 34826922 DOI: 10.1016/j.chemosphere.2021.132230] [Citation(s) in RCA: 27] [Impact Index Per Article: 13.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/03/2021] [Revised: 08/30/2021] [Accepted: 09/08/2021] [Indexed: 05/15/2023]
Abstract
This review is intent on the environmental pollution generated from printed circuit boards and the methods employed to retrieve valuable and hazardous metals present in the e-wastes. Printed circuit boards are the key components in the electronic devices and considered as huge e-pollutants in polluting our surroundings and the environment as a whole. Composing of toxic heavy metals, it causes serious health effects to the plants, animals and humans in the environment. A number of chemical, biological and physical approaches were carried out to recover the precious metals and to remove the hazardous metals from the environment. Chemical leaching is one of the conventional PCBs recycling methods which was carried out by using different organic solvents and chemicals. Need of high cost for execution, generation of secondary wastes in the conventional methods, forces to discover the advanced recycling methods such as hydrometallurgical, bio-metallurgical and bioleaching processes to retrieve the valuable metals generate through e-wastes. Among them, bioleaching process gain extra priority due to its higher efficiency of metal recovery from printed circuit boards. There are different classes of microorganisms have been utilized for precious metal recovery from the PCBs through bioleaching process such as chemolithoautotrophy, heterotrophy and different fungal species including Aspergillus sp. and Penicillium sp. The current status and scope for further studies in printed circuit boards recycling are discussed in this review.
Collapse
|
15
|
Biohydrogen from organic wastes as a clean and environment-friendly energy source: Production pathways, feedstock types, and future prospects. BIORESOURCE TECHNOLOGY 2021; 342:126021. [PMID: 34600315 DOI: 10.1016/j.biortech.2021.126021] [Citation(s) in RCA: 22] [Impact Index Per Article: 7.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/03/2021] [Revised: 09/20/2021] [Accepted: 09/21/2021] [Indexed: 06/13/2023]
Abstract
Microbial fermentation of organic matter under anaerobic conditions is currently the prominent pathway for biohydrogen production. Organic matter present in waste residues is regarded as an economic feedstock for biohydrogen production by dark and photo fermentative bacteria. Agricultural residues, fruit wastes, vegetable wastes, industrial wastewaters, and other livestock residues are some of the organic wastes most commonly used for biohydrogen production due to their higher organic content and biodegradability. Appropriate pretreatments are required to enhance the performance of biohydrogen from complex organic wastes. Biohydrogen production could also be enhanced by optimizing operation conditions and the addition of essential nutrients and nanoparticles. This review describes the pathways of biohydrogen production, discusses the effect of organic waste sources used and microbes involved on biohydrogen production, along with addressing the key parameters, advantages, and difficulties in each biohydrogen production pathway.
Collapse
|
16
|
Sequestration of toxic Pb(II) ions using ultrasonic modified agro waste: Adsorption mechanism and modelling study. CHEMOSPHERE 2021; 285:131502. [PMID: 34329150 DOI: 10.1016/j.chemosphere.2021.131502] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/18/2021] [Revised: 07/02/2021] [Accepted: 07/07/2021] [Indexed: 06/13/2023]
Abstract
Treating the effluents from industries by using biological and agricultural wastes is an emerging field of research. In this study, three different biosorbents are prepared from tamarind seeds such as; raw, sulphuric acid-modified and ultrasonic-assisted surface-modified tamarind seed powder has been utilized to expel the Pb (II) ions from synthetic solution. The surface characteristics of the newly synthesized raw and surface modified agro-waste biomass were studied by FTIR and SEM. An experimental study was carried out to investigate the effect of different parameters on adsorption of Pb(II) ions using raw, sulphuric acid-modified and ultrasonic-assisted surface-modified tamarind seeds. The maximum Pb(II) ions adsorption was found at pH - 6.0, temperature - 303 K, biosorbent dosage - 3.5 g/L and contact time - 60 min for raw tamarind seeds and 30 min for sulphuric acid-modified and ultrasonic-assisted surface-modified tamarind seeds. The adsorption mechanism was described by Langmuir isotherm and pseudo-first order kinetic model. Among the three biosorbents, ultrasonic-assisted surface-modified tamarind seeds show higher adsorption capacity (18.86 mg/g) of Pb(II) ions removal from the synthetic solution. The thermodynamic study declared that the present Pb(II) ions adsorption onto the prepared biosorbents was spontaneous, exothermic and followed physical adsorption process. Results have shown that tamarind seed was found to be the best adsorbent in the expulsion of Pb(II) ions from the wastewater environment.
Collapse
|
17
|
Adsorptive removal of Pb(II) ions onto surface modified adsorbents derived from Cassia fistula seeds: Optimization and modelling study. CHEMOSPHERE 2021; 283:131276. [PMID: 34182625 DOI: 10.1016/j.chemosphere.2021.131276] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/30/2021] [Revised: 06/09/2021] [Accepted: 06/15/2021] [Indexed: 06/13/2023]
Abstract
Cassia fistula seeds has been utilized for the abstraction of Pb(II) ions from the aqueous environment. Raw Cassia fistula seeds (RCF) and three different surface modified (physically treated - PMCF and chemically treated - HMCF and SMCF) adsorbent material were taken for investigation. The adsorption properties of these materials and their contact amongst the Pb(II) ion and sorbent materials were characterized by FTIR and SEM analysis. The parameters influencing the adsorption capacity of varied adsorbents were evaluated: maximum solution pH for Pb(II) is 5.0; interactive time is 30 min; dosage is 8.0 g/L for RCF, 4.0 g/L for HMCF, 2.5 g/L for PMCF and 1.0 g/L for SMCF. The modelling study reveals that Freundlich isotherm and Pseudo first order kinetics fits well and the utmost adsorption measurements for the varied adsorbents were found to be 13.22, 28.28, 48.66 and 129.3 mg/g, respectively.
Collapse
|
18
|
A review on catalytic-enzyme degradation of toxic environmental pollutants: Microbial enzymes. JOURNAL OF HAZARDOUS MATERIALS 2021; 419:126451. [PMID: 34174628 DOI: 10.1016/j.jhazmat.2021.126451] [Citation(s) in RCA: 75] [Impact Index Per Article: 25.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/01/2021] [Revised: 06/14/2021] [Accepted: 06/18/2021] [Indexed: 05/17/2023]
Abstract
Industrialization and other human anthropogenic activities cause serious threats to the environment. The toxic pollutants can cause detrimental diseases on diverse living beings in their respective ecosystems. Bioremediation is one of the efficient remediation methods in which the toxic pollutants are removed from the environment by the application of microorganisms or their biologically active products (enzymes). Typically, the microorganisms in the environment produce various enzymes to immobilize and degrade the toxic environmental pollutants by utilizing them as a substrate for their growth and development. Both the bacterial and fungal enzymes can degrade the toxic pollutants present in the environment and convert them into non-toxic forms through their catalytic reaction mechanism. Hydrolases, oxidoreductases, dehalogenases, oxygenases and transferases are the major classes of microbial enzymes responsible for the degradation of most of the toxic pollutants in the environment. Recently, there are different immobilizations and genetic engineering techniques have been developed to enhance enzyme efficiency and diminish the process cost for pollutant removal. This review focused on enzymatic removal of toxic pollutants such as heavy metals, dyes, plastics and pesticides in the environment. Current trends and further expansion for efficient removal of toxic pollutants through enzymatic degradation are also reviewed in detail.
Collapse
|
19
|
Effective water/wastewater treatment methodologies for toxic pollutants removal: Processes and applications towards sustainable development. CHEMOSPHERE 2021; 280:130595. [PMID: 33940449 DOI: 10.1016/j.chemosphere.2021.130595] [Citation(s) in RCA: 132] [Impact Index Per Article: 44.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/26/2020] [Revised: 04/09/2021] [Accepted: 04/12/2021] [Indexed: 05/16/2023]
Abstract
Release of pollutants due to inflating anthropogenic activities has a conspicuous effect on the environment. As water is uniquely vulnerable to pollution, water pollution control has received a considerable attention among the most critical environmental challenges. Diverse sources such as heavy metals, dyes, pathogenic and organic compounds lead to deterioration in water quality. Demand for the pollutant free water has created a greater concern in water treatment technologies. The pollutants can be mitigated through physical, chemical and biological methodologies thereby alleviating the health and environmental effects caused. Diverse technologies for wastewater treatment with an accentuation on pre-treatment of feedstock and post treatment are concisely summed up. Pollutants present in the water can be removed by processes some of which include filtration, reverse osmosis, degasification, sedimentation, flocculation, precipitation and adsorption. Membrane separation and adsorption methodologies utilized to control water pollution and are found to be more effective than conventional methods and established recovery processes. This audit relatively features different methodologies that show remarkable power of eliminating pollutants from wastewater. This review describes recent research development on wastewater treatment and its respective benefits/applications in field scale were discussed. Finally, the difficulties in the enhancement of treatment methodologies for pragmatic commercial application are recognized and the future viewpoints are introduced.
Collapse
|
20
|
Mixed biosorbent of agro waste and bacterial biomass for the separation of Pb(II) ions from water system. CHEMOSPHERE 2021; 277:130236. [PMID: 33770696 DOI: 10.1016/j.chemosphere.2021.130236] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/20/2020] [Revised: 03/03/2021] [Accepted: 03/07/2021] [Indexed: 06/12/2023]
Abstract
Adsorption of Pb(II) ions in aqueous systems by newly developed mixed biomass has been explored. Mixed biomass was prepared from agro-waste (raw Banyan tree bark, RBTB) and bacterial biomass (Pannonibacter phragmitetus). Chemical modification by sulphuric acid treatment of raw banyan tree bark (SMBTB) was accomplished for the effective separation of toxic Pb(II) ions from the aquatic system. FTIR, SEM and EDX analysis was utilized to deduce sorption characteristics of mixed biomass. Pb(II) ions maximal removal has occurred at pH-6.0, lead (II) ions concentration-25 mg/L, time and mixed biomass dosage (60 min and 3.5 g/L for RBTB - Pannonibacter phragmitetus; 30 min and 1.5 g/L for SMBTB - Pannonibacter phragmitetus) and temperature (30 °C). Data from equilibrium isotherm and kinetic analysis was best suited to the Langmuir model and pseudo-first-order kinetics. The spontaneous and exothermic nature of Pb(II) ions removal was described by thermodynamic parameters. The mixed biomass proved to be an effective and potential mixed biosorbent for toxic lead removal from solutions.
Collapse
|
21
|
Modeling analysis on the effective elimination of toxic pollutant from aquatic environment using pyrolysis assisted palmyra palm male inflorescence. ENVIRONMENTAL RESEARCH 2021; 197:111146. [PMID: 33865816 DOI: 10.1016/j.envres.2021.111146] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/13/2021] [Revised: 03/26/2021] [Accepted: 03/29/2021] [Indexed: 06/12/2023]
Abstract
In this study adsorption of Cd(II) ions using the pyrolysis assisted Palmyra palm male inflorescence (PAPMI) was systematically examined. A batch adsorption study was carried out to determine the type of interactions and removal efficiency which is based on the surface property of PAPMI. The diverse parameters which affect the adsorption performance of PAPMI for Cd(II) ion removal were optimized: biosorbent dose - 1.25 g/L, pH - 6.0, temperature - 303 K, initial cadmium ions concentration - 50 mg/L and contact time - 40 min. Pseudo-first order kinetics and Langmuir isotherm models were more suitable to describe the adsorption kinetics and isotherm, respectively. Therefore, modeling studies portrayed the present Cd(II) ions adsorption on PAPMI as monolayer adsorption occurs on the homogeneous surface and follows the physisorption mechanism. The maximum adsorption capacity of the synthesized PAPMI was examined as 233.2 mg/g from the equilibrium isotherm investigation. Based on the calculated thermodynamic parameters (ΔGo, ΔHo and ΔSo) values, the present Cd(II) ions adsorption on PAPMI was explicated as feasible, and exothermic. The outcome proposed that Palmyra palm male inflorescence can be a suitable adsorbent for expulsion of Cd(II) ions from aqueous environment. In the interim, the utilization of pyrolysis assisted is a viable and fast uptake innovation for the removal of heavy metals from water environment.
Collapse
|
22
|
Simultaneous removal of Cu(II) and reactive green 6 dye from wastewater using immobilized mixed fungal biomass and its recovery. CHEMOSPHERE 2021; 271:129519. [PMID: 33460887 DOI: 10.1016/j.chemosphere.2020.129519] [Citation(s) in RCA: 31] [Impact Index Per Article: 10.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/18/2020] [Revised: 12/24/2020] [Accepted: 12/28/2020] [Indexed: 06/12/2023]
Abstract
Immobilized fungal biomass (Aspergillus niger and Aspergillus flavus) was prepared and analysed for the simultaneous removal of Cu(II) ion and Reactive Green 6 dye from aqueous phase. Different characterization analysis was utilized to exploit the adsorption characteristics of fungal biomass. Batch biosorption tests, performed to investigate the factors influencing biosorption process inferred optimal values of 25 mg/L of adsorbate with equilibrium time of 60 min, 2.5 g of immobilized fungal biomass, temperature of 303 K and pH of 5.0 for the maximal removal of pollutants. The obtained experimental data was utilized to evaluate the kinetic, thermodynamic and equilibrium models. Langmuir isotherm model has higher correlation coefficient [Cu(II) ion = 0.8625 and RG 6 dye = 0.8575] with small values of errors (RMSE = 3.746 and SSE = 56.12 for Cu(II) ion; RMSE = 4.872 and SSE = 11.87 for RG 6 dye). Kinetic studies performed to evaluate the adsorption rate mechanism of this present study indicated that pseudo-first order and pseudo-second order kinetics to be most fitting model for removal of Cu(II) ions and Reactive green dye respectively. Thermodynamic analysis inferred the spontaneous, random, and exothermic nature of the biosorption process based on ΔGo, ΔHo, and ΔSo values respectively. The prepared biomass can be an alternative for the elimination of toxic pollutants from wastewater.
Collapse
|
23
|
Ultrasonic assisted agro waste biomass for rapid removal of Cd(II) ions from aquatic environment: Mechanism and modelling analysis. CHEMOSPHERE 2021; 271:129484. [PMID: 33422931 DOI: 10.1016/j.chemosphere.2020.129484] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/24/2020] [Revised: 12/21/2020] [Accepted: 12/26/2020] [Indexed: 06/12/2023]
Abstract
In this research, dragon fruit peel, an agro-waste was used to prepare the new adsorbent for the removal of Cd(II) ions from the aquatic environment. The characterization techniques of SEM, FTIR and EDX for the prepared materials have been studied. The influential parameters for Cd(II) ions were experimented and identified the probable conditions for the maximum adsorption of Cd(II) ions. The investigations on isotherms, kinetics, and thermodynamics for Cd(II) ions removal were examined. Adsorption isotherm data was well discussed with Langmuir model based on the obtained good correlation coefficient and error values. Moreover, it follows the pseudo-first-order and exothermic process. The values of monolayer adsorption capacity of surface-modified dragon fruit peel (SMDFP) and ultrasonic-assisted dragon fruit peel (UADFP) was determined to be 7.469 and 24.76 mg/g at an equilibrium condition, respectively. This study exposed that ultrasonic-assisted dragon fruit peel can be a suitable adsorbent for Cd(II) ions removal from the water environment.
Collapse
|
24
|
A review on biosynthesis of metal nanoparticles and its environmental applications. CHEMOSPHERE 2021; 264:128580. [PMID: 33059285 DOI: 10.1016/j.chemosphere.2020.128580] [Citation(s) in RCA: 107] [Impact Index Per Article: 35.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/09/2020] [Revised: 10/01/2020] [Accepted: 10/05/2020] [Indexed: 05/02/2023]
Abstract
Nanotechnology has become one of the emerging multi-disciplinary fields receiving universal attention and playing a substantial role in agriculture, environment and pharmacology. In spite of various techniques employed for nanoparticle synthesis such as laser ablation, mechanical milling, spinning and chemical deposition, usage of hazardous chemicals and expensiveness of the process makes it unsuitable for the continuous production. Hence the necessity of sustainable, economic and environment friendly approach development have increased in recent years. Microbial synthesis of nanoparticles connecting microbiology and nanotechnology is one of the green techniques employed for sustainable production. Gold, silver and other metal nanoparticles like platinum, palladium, molybdenum nanoparticles biosynthesis by bacteria, fungi, yeast and algae have been reported in the present review. On account of microbial rich community, several microbes have been explored for the production of nanoparticles. Nanoparticles are also employed for environmental remediation processes such as pollutant removal and detection of contaminants. Lack of monodispersity and prolonged duration of synthesis are the limitations of bio-synthesis process which can be overcome by optimization of methods of microbial cultivation and its extraction techniques. The current review describes the different microbes involved in the synthesis of nanoparticles and its environmental applications.
Collapse
|
25
|
Antibacterial Activity of Alkaloids, Flavonoids, Saponins and Tannins Mediated Green Synthesised Silver Nanoparticles Against Pseudomonas aeruginosa and Bacillus subtilis. J CLUST SCI 2019. [DOI: 10.1007/s10876-019-01547-2] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/27/2022]
|
26
|
Sanitation: a call on resources for promoting urban child health. Indian Pediatr 2005; 42:1199-206. [PMID: 16424556] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/06/2023]
Abstract
Poor sanitation is known to increase the risk of morbidity and mortality from diarrhea among children. Several studies have found a high correlation between childhood morbidity and availability of sanitation services. It has been estimated that 1.7 million deaths each year, or 3.1 percent of all deaths are attributable to inadequate access to water, sanitation and hygiene. The urgency for sanitation in the urban environment stems from the fact that the urban poor live in crowded slums and informal settlements where sanitation facilities are particularly important for children's health and personal dignity. Demand for sanitation services has remained low, as livelihood priorities have been more pressing. There is a pressing need to get Governments and society to recognize the appalling toll created by poor sanitary conditions in urban poor settlements. Serious efforts should be made to develop local, national and international campaigns which promote convergence among programs aimed at urban health infrastructure, community development and education; motivate people to demand and maintain better sanitation; and place sanitation to the forefront of development and political dialogue.
Collapse
|