A Practical Approach Toward Highly Reproducible and High-Quality Perovskite Films Based on an Aging Treatment

Solution processing of hybrid perovskite semiconductors is a highly promising approach for the fabrication of cost-effective electronic and optoelectronic devices. However, challenges with this approach lie in overcoming the controllability of the perovskite film morphology and the reproducibility of device efficiencies. Here, a facile and practical aging treatment (AT) strategy is reported to modulate the perovskite crystal growth to produce sufficiently high-quality perovskite thin films with improved homogeneity and full-coverage morphology. The resulting AT-films exhibit fewer defects, faster charge carrier transfer/extraction, and suppressed non-radiative recombination compared with reference. The AT-devices achieve a noticeable improvement in the reproducibility, operational stability, and photovoltaic performance of devices, with the average efficiency increased by 16%. It also demonstrates the feasibility and scalability of AT strategy in optimizing the film morphology and device performance for other perovskite components including MAPbI3 , (MAPbBr3 )15 (FAPbI3 )85 , and Cs0.05 (MAPbBr3 )0.17 (FAPbI3 )0.83 . This method opens an effective avenue to improve the quality of perovskite films and photovoltaic devices in a scalable and reproducible manner.

Imaging Light-Induced Migration of Dislocations in Halide Perovskites with 3D Nanoscale Strain Mapping

In recent years, halide perovskite materials have been used to make high-performance solar cells and light-emitting devices. However, material defects still limit device performance and stability. Here, synchrotron-based Bragg coherent diffraction imaging is used to visualize nanoscale strain fields, such as those local to defects, in halide perovskite microcrystals. Significant strain heterogeneity within MAPbBr3 (MA = CH3 NH3 + ) crystals is found in spite of their high optoelectronic quality, and both 〈100〉 and 〈110〉 edge dislocations are identified through analysis of their local strain fields. By imaging these defects and strain fields in situ under continuous illumination, dramatic light-induced dislocation migration across hundreds of nanometers is uncovered. Further, by selectively studying crystals that are damaged by the X-ray beam, large dislocation densities and increased nanoscale strains are correlated with material degradation and substantially altered optoelectronic properties assessed using photoluminescence microscopy measurements. These results demonstrate the dynamic nature of extended defects and strain in halide perovskites, which will have important consequences for device performance and operational stability.

Tuning the energy transfer in Ruddlesden-Popper perovskites phases through isopropylammonium addition - towards efficient blue emitters

Here we demonstrate blue LEDs with a peak wavelength of 481 nm, with outstanding colour purity of up to 88% (CIE coordinates (0.1092, 0.1738)), an external quantum yield of 5.2% and a luminance of 8260 cd m^-2. These devices are based on quasi-2D PEA₂(Cs_0.75MA_0.25)Pb₂Br₇, which is cast from solutions containing isopropylammonium (iPAm). iPAm as additive assist in supressing the formation of bulk-like phases, as pointed out by both photophysical and structural characterization. Additionally, the study of the excitation dynamics demonstrates a hindering of the energy transfer to domains of lower energy that generally undermines the performance and emission characteristics of blue-emitting LEDs based on quasi-2D perovskites. The achieved narrow distribution of quantum well sizes and the hindered energy transfer result in a thin film photoluminescence quantum yield exceeding 60%. Our work demonstrates the great potential to tailor the composition and the structure of thin films based on Ruddlesden-Popper phases to boost performance of optoelectronic devices - specifically blue perovskite LEDs.

Tunable Multiband Halide Perovskite Tandem Photodetectors with Switchable Response

Photodetectors with multiple spectral response bands have shown promise to improve imaging and communications through the switchable detection of different photon energies. However, demonstrations to date have been limited to only two bands and lack capability for fast switching in situ. Here, we exploit the band gap tunability and capability of all-perovskite tandem solar cells to demonstrate a new device concept realizing four spectral bands of response from a single multijunction device, with fast, optically controlled switching between the bands. The response to monochromatic light is highly selective and narrowband without the need for additional filters and switches to broader response bands on applying bias light. Sensitive photodetection above 6 × 10¹¹ Jones is demonstrated in all modes, with rapid switching response times of <250 ns. We demonstrate proof of principle on how the manipulation of the modular multiband detector response through light conditions enables diverse applications in optical communications with secure encryption.

The Origin of Broad Emission in ⟨100⟩ Two-Dimensional Perovskites: Extrinsic vs Intrinsic Processes

2D metal halide perovskites can show narrow and broad emission bands (BEs), and the latter's origin is hotly debated. A widespread opinion assigns BEs to the recombination of intrinsic self-trapped excitons (STEs), whereas recent studies indicate they can have an extrinsic defect-related origin. Here, we carry out a combined experimental-computational study into the microscopic origin of BEs for a series of prototypical phenylethylammonium-based 2D perovskites, comprising different metals (Pb, Sn) and halides (I, Br, Cl). Photoluminescence spectroscopy reveals that all of the compounds exhibit BEs. Where not observable at room temperature, the BE signature emerges upon cooling. By means of DFT calculations, we demonstrate that emission from halide vacancies is compatible with the experimentally observed features. Emission from STEs may only contribute to the BE in the wide-band-gap Br- and Cl-based compounds. Our work paves the way toward a complete understanding of broad emission bands in halide perovskites that will facilitate the fabrication of efficient narrow and white light emitting devices.

Efficient vertical charge transport in polycrystalline halide perovskites revealed by four-dimensional tracking of charge carriers

Fast diffusion of charge carriers is crucial for efficient charge collection in perovskite solar cells. While lateral transient photoluminescence microscopies have been popularly used to characterize charge diffusion in perovskites, there exists a discrepancy between low diffusion coefficients measured and near-unity charge collection efficiencies achieved in practical solar cells. Here, we reveal hidden microscopic dynamics in halide perovskites through four-dimensional (directions x, y and z and time t) tracking of charge carriers by characterizing out-of-plane diffusion of charge carriers. By combining this approach with confocal microscopy, we discover a strong local heterogeneity of vertical charge diffusivities in a three-dimensional perovskite film, arising from the difference between intragrain and intergrain diffusion. We visualize that most charge carriers are efficiently transported through the direct intragrain pathways or via indirect detours through nearby areas with fast diffusion. The observed anisotropy and heterogeneity of charge carrier diffusion in perovskites rationalize their high performance as shown in real devices. Our work also foresees that further control of polycrystal growth will enable solar cells with micrometres-thick perovskites to achieve both long optical path length and efficient charge collection simultaneously.

Taking a closer look - how the microstructure of Dion-Jacobson perovskites governs their photophysics

Scarce information is available on the thin film morphology of Dion-Jacobson halide perovskites. However, the microstructure can have a profound impact on a material's photophysics and its potential for optoelectronic applications. The microscopic mechanisms at play in the prototypical 1,4-phenylenedimethanammonium lead iodide (PDMAPbI₄) Dion-Jacobson compound are here elucidated through a combination of hyperspectral photoluminescence and Raman spectro-microscopy supported by x-ray diffraction. In concert, these techniques allow for a detailed analysis of local composition and microstructure. PDMAPbI₄ thin films are shown to be phase-pure and to form micron-sized crystallites with a dominant out-of-plane stacking and strong in-plane rotational disorder. Sample topography, localised defects, and a strong impact of temperature-variation create a complex and heterogeneous picture of the luminescence that cannot be captured by a simplified bulk-semiconductor picture. Our study highlights the power of optical microscopy techniques used in combination, and underlines the danger of conceptual oversimplification when analysing the photophysics of perovskite thin films.

Compositional Variation in FAPb1-xSnxI3 and Its Impact on the Electronic Structure: A Combined Density Functional Theory and Experimental Study

Given their comparatively narrow band gap, mixed Pb-Sn iodide perovskites are interesting candidates for bottom cells in all-perovskite tandems or single junction solar cells, and their luminescence around 900 nm offers great potential for near-infrared optoelectronics. Here, we investigate mixed FAPb_1-xSn_xI₃ offering the first accurate determination of the crystal structure over a temperature range from 293 to 100 K. We demonstrate that all compositions exhibit a cubic structure at room temperature and undergo at least two transitions to lower symmetry tetragonal phases upon cooling. Using density functional theory (DFT) calculations based on these structures, we subsequently reveal that the main impact on the band gap bowing is the different energy of the s and p orbital levels derived from Pb and Sn. In addition, this energy mismatch results in strongly composition-dependent luminescence characteristics. Whereas neat and Sn-rich compounds exhibit bright and narrow emission with a clean band gap, Sn-poor compounds intrinsically suffer from increased carrier recombination mediated by in-gap states, as evidenced by the appearance of pronounced low-energy photoluminescence upon cooling. This study is the first to link experimentally determined structures of FAPb_1-xSn_xI₃ with the electronic properties, and we demonstrate that optoelectronic applications based on Pb-Sn iodide compounds should employ Sn-rich compositions.

Molecular Doping Directed by a Neutral Radical

Molecular doping makes possible tunable electronic properties of organic semiconductors, yet a lack of control of the doping process narrows its scope for advancing organic electronics. Here, we demonstrate that the molecular doping process can be improved by introducing a neutral radical molecule, namely nitroxyl radical (2,2,6,6-teramethylpiperidin-i-yl) oxyl (TEMPO). Fullerene derivatives are used as the host and 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazoles (DMBI-H) as the n-type dopant. TEMPO can abstract a hydrogen atom from DMBI-H and transform the latter into a much stronger reducing agent DMBI•, which efficiently dopes the fullerene derivative to yield an electrical conductivity of 4.4 S cm-1. However, without TEMPO, the fullerene derivative is only weakly doped likely by a hydride transfer following by an inefficient electron transfer. This work unambiguously identifies the doping pathway in fullerene derivative/DMBI-H systems in the presence of TEMPO as the transfer of a hydrogen atom accompanied by electron transfer. In the absence of TEMPO, the doping process inevitably leads to the formation of less symmetrical hydrogenated fullerene derivative anions or radicals, which adversely affect the molecular packing. By adding TEMPO we can exclude the formation of such species and, thus, improve charge transport. In addition, a lower temperature is sufficient to meet an efficient doping process in the presence of TEMPO. Thereby, we provide an extra control of the doping process, enabling enhanced thermoelectric performance at a low processing temperature.

On the Colloidal Stability of PbS Quantum Dots Capped with Methylammonium Lead Iodide Ligands

Phase-transfer exchange of pristine organic ligands for inorganic ones is essential for the integration of colloidal quantum dots (CQDs) in optoelectronic devices. This method results in a colloidal dispersion (ink) which can be directly deposited by various solution-processable techniques to fabricate conductive films. For PbS CQDs capped with methylammonium lead iodide ligands (MAPbI₃), the most commonly employed solvent is butylamine, which enables only a short-term (hours) colloidal stability and thus brings concerns on the possibility of manufacturing CQD devices on a large scale in a reproducible manner. In this work, we studied the stability of alternative inks in two highly polar solvents which impart long-term colloidal stability of CQDs: propylene carbonate (PC) and 2,6-difluoropyridine (DFP). The aging and the loss of the ink's stability were monitored with optical, structural, and transport measurements. With these solvents, PbS CQDs capped with MAPbI₃ ligands retain colloidal stability for more than 20 months, both in dilute and concentrated dispersions. After 17 months of ink storage, transistors with a maximum linear mobility for electrons of 8.5 × 10^-3 cm²/V s are fabricated; this value is 17% of the one obtained with fresh solutions. Our results show that both PC- and DFP-based PbS CQD inks offer the needed shelf life to allow for the development of a CQD device technology.

Molecular engineering of organic semiconductors enables noble metal-comparable SERS enhancement and sensitivity

Nanostructured molecular semiconductor films are promising Surface-Enhanced Raman Spectroscopy (SERS) platforms for both fundamental and technological research. Here, we report that a nanostructured film of the small molecule DFP-4T, consisting of a fully π-conjugated diperfluorophenyl-substituted quaterthiophene structure, demonstrates a very large Raman enhancement factor (>105) and a low limit of detection (10-9 M) for the methylene blue probe molecule. This data is comparable to those reported for the best inorganic semiconductor- and even intrinsic plasmonic metal-based SERS platforms. Photoluminescence spectroscopy and computational analysis suggest that both charge-transfer energy and effective molecular interactions, leading to a small but non-zero oscillator strength in the charge-transfer state between the organic semiconductor film and the analyte molecule, are required to achieve large SERS enhancement factors and high molecular sensitivities in these systems. Our results provide not only a considerable experimental advancement in organic SERS figure-of-merits but also a guidance for the molecular design of more sensitive SERS systems.

Electroluminescence Generation in PbS Quantum Dot Light-Emitting Field-Effect Transistors with Solid-State Gating

The application of light-emitting field-effect transistors (LEFET) is an elegant way of combining electrical switching and light emission in a single device architecture instead of two. This allows for a higher degree of miniaturization and integration in future optoelectronic applications. Here, we report on a LEFET based on lead sulfide quantum dots processed from solution. Our device shows state-of-the-art electronic behavior and emits near-infrared photons with a quantum yield exceeding 1% when cooled. We furthermore show how LEFETs can be used to simultaneously characterize the optical and electrical material properties on the same device and use this benefit to investigate the charge transport through the quantum dot film.

Excited-State Interaction of Semiconducting Single-Walled Carbon Nanotubes with Their Wrapping Polymers

We employ photoluminescence and pump-probe spectroscopy on films of semiconducting single-walled carbon nanotubes (CNTs) of different chirality wrapped with either a wide band gap polyfluorene derivative (PF12) or a polythiophene with narrower gap (P3DDT) to elucidate the excited states' interplay between the two materials. Excitation above the polymer band gap gives way to an ultrafast electron transfer from both polymers toward the CNTs. By monitoring the hole polaron on the polymer via its mid infrared signature, we show that also illumination below the polymer band gap leads to the formation of this fingerprint and infer that holes are also transferred toward the polymer. As this contradicts the standard way of discussing the involved energy levels, we propose that polymer-wrapped CNTs should be considered as a single hybrid system, exhibiting states shared between the two components. This proposition is validated through quantum chemical calculations that show hybridization of the first excited states, especially for the thiophene-CNT sample.

Polarons in Narrow Band Gap Polymers Probed over the Entire Infrared Range: A Joint Experimental and Theoretical Investigation

We investigate the photoinduced absorption (PIA) spectra of the prototypical donor-acceptor polymer [2,6-(4,4-bis(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b']dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)] (C-PCPDTBT) and its silicon bridged variant Si-PCPDTBT over a spectral range from 0.07 to 1.5 eV. Comparison between time-dependent density functional theory simulations of the electronic and vibrational transitions of singlet excitons, triplet excitons, polarons, and bipolarons with the experimental results proves that the observed features are due to positive polarons delocalized on the polymer chains. We find that the more crystalline Si-bridged variant gives rise to a red-shift in the transition energies, especially in the mid-infrared (MIR) spectral range and furthermore observe that the pristine polymers' responses depend on the excitation energy. Blending with PCBM, on the other hand, leads to excitation-independent PIA spectra. By computing the response properties of molecular aggregates, we show that polarons are delocalized in not only the intra- but also the interchain direction, leading to intermolecular transitions which correspond well to experimental absorption features at the lowest energies.

APC and beta-catenin in alveolar soft part sarcoma (ASPS)--immunohistochemical and molecular genetic analysis

Apart from its role in cell-adhesion, beta-catenin is regarded as an oncoprotein, the cytoplasmic level of which is regulated by APC as a tumor suppressor protein. Changes of chromosome 5q, the region that includes the APC-gene, are known to be important in the pathogenesis of fibromatosis; however, little is known about the significance of APC and beta-catenin in other mesenchymal tumors. Therefore, we used immunohistochemistry and DNA-analysis to investigate four cases of alveolar soft-part sarcoma (ASPS) as a mesenchymal tumor with a distinct histologic appearance. In three cases of ASPS the APC-gene product was found to have strong nuclear expression and only faint cytoplasmic staining. Beta-catenin showed a partly membranous, partly strong intracytoplasmic expression. No gene mutations for APC and beta-catenin were detected in any of the four cases. These investigations suggest that, apart from their function in carcinogenesis and fibromatoses, APC and beta-catenin play a role in the pathogenesis of soft tissue tumors such as ASPS. The significance of a striking nuclear accumulation of non-mutated, virtually functionally active APC-tumor suppressor protein has not yet been investigated. A nuclear function of APC in ASPS in down-regulating nuclear transcription processes linked to overexpression of beta-catenin, as is known in colorectal carcinogenesis, may be hypothesized.

Targets of activated steroid hormone receptors: basal transcription factors and receptor interacting proteins

Steroid hormone receptors constitute a family of inducible transcription factors that mediate the multi-fold effects of steroids on development, reproduction, proliferation, and cellular homeostasis. Activation through the binding of the cognate hormone enables the receptors to bind with high affinity to specific response elements in the promoters of target genes, resulting in stimulation or repression of transcription. While protein-protein interactions were early postulated to play an important role in the mechanism through which steroid hormone receptors exert their effects on transcription initiation, recent research has revealed a number of potential targets within the basal transcription machinery. Moreover, aided by the development of protein-protein interaction screening techniques, a rapidly increasing number of factors has been identified which associate with hormonally activated receptors and may be involved in the transactivation process. This review summarizes the basal transcription factors and cofactors which are targeted by steroid hormone receptors, describes their structure and properties, and discusses possible mechanisms.

Synergistic enhancement of PRB-mediated RU486 and R5020 agonist activities through cyclic adenosine 3',5'-monophosphate represents a delayed primary response

Activators of protein kinase A have been shown to affect the transactivation potential of progestins and antiprogestins. To analyze the mechanisms and factors involved, we have created HeLa and CV1 cell clones stably expressing isoform B of progesterone receptor. In the HeLa cell background, the progesterone antagonist RU486 significantly induces progesterone-regulatable reporter genes, and this agonistic effect is synergistically enhanced by elevating cAMP or through overexpression of protein kinase A catalytic subunit. In contrast, in CV1 cells containing functional progesterone receptors no agonist activity of RU486 could be detected, suggesting the involvement of cell specifically expressed factors. In a PR(B)-positive HeLa cell clone containing stably integrated copies of a thymidine kinase-luciferase reporter gene with two progesterone response elements, we observed a complete loss of RU486 antagonist potential upon cotreatment with cAMP for 25 h while partial antagonist potential was maintained in a 5-h experiment. This result shows that, particularly in the presence of protein kinase A activators, the duration of hormone treatment is a crucial parameter in the evaluation of antagonist properties of antiprogestins. A detailed analysis of the kinetics of the hormone effects on transcription revealed that the onset of cAMP/RU486 synergism is delayed relative to the responses induced by RU486 or R5020 alone. Moreover, partial inhibition of protein synthesis by cycloheximide completely abolished cAMP/RU486 synergism while R5020 and RU486 responses were not inhibited. Together, these data indicate that cAMP/RU486 synergism is a delayed primary response requiring the intermediate induction of an essential factor.