1
|
Spicher MT, Schwaminger SP, von der Haar-Leistl D, Peralta MM, Mikacevic G, Wagner FE, Berensmeier S. Pilot-scale co-precipitation synthesis of a novel active ingredient made of ultrasmall iron (oxyhydr)oxide nanoparticles for the treatment of hyperphosphatemia. RSC Adv 2024; 14:16117-16127. [PMID: 38769965 PMCID: PMC11103348 DOI: 10.1039/d4ra02719a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/11/2024] [Accepted: 05/03/2024] [Indexed: 05/22/2024] Open
Abstract
Due to its simplicity, co-precipitation is the most commonly used method for producing iron (oxyhydr)oxide nanoparticles. However, it is reported to be sensitive to changes in process parameters, which complicates scale-up and is why only volumes up to 1.2 L have been described in the literature. This study aims to demonstrate the scale-up of a co-precipitation synthesis to 100 L using the example of a new phosphate-binding active ingredient based on iron (oxyhydr)oxide. The synthesis was shown to be very robust to changes in synthesis parameters and stirrer geometries. The in vitro phosphate-binding efficacy and the yield were maintained in all five scales tested. Only the content of the components in the nanoparticles varied slightly. However, Mössbauer spectroscopy, dynamic light scattering (DLS), and attenuated total reflection Fourier transform infrared spectroscopy (FT-IR) revealed no evidence of structural changes, but a reduction in the size of the iron (oxyhydr)oxide cores and the total core-shell nanoparticle sizes. Overall, this study has successfully demonstrated that ultrasmall iron (oxyhydr)oxide nanoparticles can be produced on a pilot scale by co-precipitation with a yield of >40 g L-1.
Collapse
Affiliation(s)
- Magdalena Teresa Spicher
- Fraunhofer Institute for Process Engineering and Packaging (IVV) Giggenhauser Str. 35 85354 Freising Germany +49 8161 491459
- Chair of Bioseparation Engineering, School of Engineering and Design, Technical University of Munich Boltzmannstraße 15 85748 Garching Germany
| | - Sebastian Patrick Schwaminger
- Chair of Bioseparation Engineering, School of Engineering and Design, Technical University of Munich Boltzmannstraße 15 85748 Garching Germany
- Division of Medicinal Chemistry, Otto Loewi Research Center, Medical University of Graz Neue Stiftingtalstraße 6 8010 Graz Austria
- BioTechMed-Graz Austria
| | - Daniela von der Haar-Leistl
- Fraunhofer Institute for Process Engineering and Packaging (IVV) Giggenhauser Str. 35 85354 Freising Germany +49 8161 491459
| | - Marian Montiel Peralta
- Fraunhofer Institute for Process Engineering and Packaging (IVV) Giggenhauser Str. 35 85354 Freising Germany +49 8161 491459
| | - Georgina Mikacevic
- Fraunhofer Institute for Process Engineering and Packaging (IVV) Giggenhauser Str. 35 85354 Freising Germany +49 8161 491459
| | - Friedrich Ernst Wagner
- Department of Physics, Technical University of Munich James-Franck-Straße 1 85748 Garching Germany
| | - Sonja Berensmeier
- Chair of Bioseparation Engineering, School of Engineering and Design, Technical University of Munich Boltzmannstraße 15 85748 Garching Germany
| |
Collapse
|
2
|
Zimmermann I, Kaveh-Baghbaderani Y, Eilts F, Kohn N, Fraga-García P, Berensmeier S. Direct Affinity Ligand Immobilization onto Bare Iron Oxide Nanoparticles Enables Efficient Magnetic Separation of Antibodies. ACS Appl Bio Mater 2024. [PMID: 38740514 DOI: 10.1021/acsabm.4c00280] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/16/2024]
Abstract
Magnetic separation is a promising alternative to chromatography for enhancing the downstream processing (DSP) of monoclonal antibodies (mAbs). However, there is a lack of efficient magnetic particles for successful application. Aiming to fill this gap, we demonstrate the suitability of bare iron oxide nanoparticles (BION) with physical site-directed immobilization of an engineered Protein A affinity ligand (rSpA) as an innovative magnetic material. The rSpA ligand contains a short peptide tag that enables the direct and stable immobilization onto the uncoated BION surface without commonly required laborious particle activation. The resulting BION@rSpA have beneficial characteristics outperforming conventional Protein A-functionalized magnetic particles: a simple, fast, low-cost synthesis, a particle size in the nanometer range with a large effective specific surface area enabling large immunoglobulin G (IgG) binding capacity, and a high magnetophoretic velocity advantageous for fast processing. We further show rapid interactions of IgG with the easily accessible rSpA ligands. The binding of IgG to BION@rSpA is thereby highly selective and not impeded by impurity molecules in perfusion cell culture supernatant. Regarding the subsequent acidic IgG elution from BION@rSpA@IgG, we observed a hampering pH increase caused by the protonation of large iron oxide surfaces after concentrating the particles in 100 mM sodium acetate buffer. However, the pH can be stabilized by adding 50 mM glycine to the elution buffer, resulting in recoveries above 85% even at high particle concentrations. Our work shows that BION@rSpA enable efficient magnetic mAb separation and could help to overcome emerging bottlenecks in DSP.
Collapse
Affiliation(s)
- Ines Zimmermann
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany
| | - Yasmin Kaveh-Baghbaderani
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany
| | - Friederike Eilts
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany
| | - Nadja Kohn
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany
| | - Paula Fraga-García
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany
| | - Sonja Berensmeier
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany
- Munich Institute of Integrated Materials, Energy and Process Engineering, Technical University of Munich, Lichtenbergstraße 4a, 85748 Garching, Germany
| |
Collapse
|
3
|
Wittmann L, Eigenfeld M, Büchner K, Meiler J, Habisch H, Madl T, Kerpes R, Becker T, Berensmeier S, Schwaminger SP. Millifluidic magnetophoresis-based chip for age-specific fractionation: evaluating the impact of age on metabolomics and gene expression in yeast. Lab Chip 2024. [PMID: 38739033 DOI: 10.1039/d4lc00185k] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/14/2024]
Abstract
A novel millifluidic process introduces age-based fractionation of S. pastorianus var. carlsbergensis yeast culture through magnetophoresis. Saccharomyces yeast is a model organism for aging research used in various industries. Traditional age-based cell separation methods were labor-intensive, but techniques like magnetic labeling have eased the process by being non-invasive and scalable. Our approach introduces an age-specific fractionation using a 3D-printed millfluidic chip in a two-step process, ensuring efficient cell deflection in the magnetic field and counteracting magnetic induced convection. Among various channel designs, the pinch-shaped channel proved most effective for age differentiation based on magnetically labeled bud scar numbers. Metabolomic analyses revealed changes in certain amino acids and increased NAD+ levels, suggesting metabolic shifts in aging cells. Gene expression studies further underlined these age-related metabolic changes. This innovative platform offers a high-throughput, non-invasive method for age-specific yeast cell fractionation, with potential applications in industries ranging from food and beverages to pharmaceuticals.
Collapse
Affiliation(s)
- L Wittmann
- TUM School of Engineering and Design, Chair of Bioseparation Engineering, Technical University of Munich, Boltzmannstr. 15, 85748 Garching, Germany.
| | - M Eigenfeld
- TUM School of Life Science, Chair of Brewing and Beverage Technology, Technical University of Munich, Weihenstephaner Steig 20, 85354 Freising, Germany.
- Otto-Loewi Research Center, Division of Medicinal Chemistry, Medical University of Graz, Neue Stiftingtalstr. 6, 8010 Graz, Austria
| | - K Büchner
- TUM School of Life Science, Chair of Brewing and Beverage Technology, Technical University of Munich, Weihenstephaner Steig 20, 85354 Freising, Germany.
| | - J Meiler
- TUM School of Engineering and Design, Chair of Bioseparation Engineering, Technical University of Munich, Boltzmannstr. 15, 85748 Garching, Germany.
| | - H Habisch
- Otto-Loewi Research Center, Division of Medicinal Chemistry, Medical University of Graz, Neue Stiftingtalstr. 6, 8010 Graz, Austria
| | - T Madl
- Otto-Loewi Research Center, Division of Medicinal Chemistry, Medical University of Graz, Neue Stiftingtalstr. 6, 8010 Graz, Austria
- BioTechMed-Graz, Mozartgasse 12/II, 8010 Graz, Austria.
| | - R Kerpes
- TUM School of Life Science, Chair of Brewing and Beverage Technology, Technical University of Munich, Weihenstephaner Steig 20, 85354 Freising, Germany.
| | - T Becker
- Otto-Loewi Research Center, Division of Medicinal Chemistry, Medical University of Graz, Neue Stiftingtalstr. 6, 8010 Graz, Austria
- Munich Institute of Integrated Materials, Energy and Process Engineering, Technical University of Munich, Lichtenberstr. 4a, 85748 Garching, Germany
| | - S Berensmeier
- TUM School of Engineering and Design, Chair of Bioseparation Engineering, Technical University of Munich, Boltzmannstr. 15, 85748 Garching, Germany.
- Munich Institute of Integrated Materials, Energy and Process Engineering, Technical University of Munich, Lichtenberstr. 4a, 85748 Garching, Germany
| | - S P Schwaminger
- TUM School of Engineering and Design, Chair of Bioseparation Engineering, Technical University of Munich, Boltzmannstr. 15, 85748 Garching, Germany.
- Otto-Loewi Research Center, Division of Medicinal Chemistry, Medical University of Graz, Neue Stiftingtalstr. 6, 8010 Graz, Austria
- BioTechMed-Graz, Mozartgasse 12/II, 8010 Graz, Austria.
| |
Collapse
|
4
|
Röcker D, Dietmann K, Nägler L, Su X, Fraga-García P, Schwaminger SP, Berensmeier S. Design and characterization of an electrochemically-modulated membrane chromatography device. J Chromatogr A 2024; 1718:464733. [PMID: 38364620 DOI: 10.1016/j.chroma.2024.464733] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/15/2023] [Revised: 02/07/2024] [Accepted: 02/09/2024] [Indexed: 02/18/2024]
Abstract
Membrane separations offer a compelling alternative to traditional chromatographic methods by overcoming mass transport limitations. We introduce an additional degree of freedom in modulating membrane chromatography by using metalized membranes in a potential-driven process. Investigating the impact of a gold coating on membrane characteristics, the sputtered gold layer enhances the surface conductivity with stable electrochemical behavior. However, this comes at the expense of reduced permeability, wettability, and static binding capacity (∼ 474 µg g-1 of maleic acid). The designed device displayed a homogenous flow distribution, and the membrane electrodes exhibit predominantly capacitive behavior during potential application. Modulating the electrical potential during the adsorption and desorption phase strongly influenced the binding and elution behavior of anion-exchange membranes. Switching potentials between ±1.0 V vs. Ag/AgCl induces desorption, confirming the process principle. Elution efficiency reaches up to 58 % at -1.0 V vs. Ag/AgCl in the desorption phase without any alteration of the mobile phase. Increasing the potential perturbation ranging from +1.0 V to -1.0 V vs. Ag/AgCl resulted in reduced peak width and improved elution behavior, demonstrating the feasibility of electrochemically-modulated membrane chromatography. The developed process has great potential as a gentle and sustainable separation step in the biotechnological and chemical industry.
Collapse
Affiliation(s)
- Dennis Röcker
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Boltzmannstraße 15, Garching 85748, Germany; Munich Institute for Integrated Materials, Energy and Process Engineering, Technical University of Munich, Lichtenbergstraße 4a, Garching 85748, Germany
| | - Katharina Dietmann
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Boltzmannstraße 15, Garching 85748, Germany
| | - Larissa Nägler
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Boltzmannstraße 15, Garching 85748, Germany
| | - Xiao Su
- Department of Chemical and Biomolecular Engineering, University of Illinois Urbana-Champaign, Urbana, IL 61801, United States
| | - Paula Fraga-García
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Boltzmannstraße 15, Garching 85748, Germany
| | - Sebastian P Schwaminger
- Division of Medicinal Chemistry, Otto-Loewi Research Center, Medical University of Graz, Neue Stiftingtalstraße 6, Graz 8010, Austria; BioTechMed-Graz, Mozartgasse 12/II, Graz 8010, Austria.
| | - Sonja Berensmeier
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Boltzmannstraße 15, Garching 85748, Germany; Munich Institute for Integrated Materials, Energy and Process Engineering, Technical University of Munich, Lichtenbergstraße 4a, Garching 85748, Germany.
| |
Collapse
|
5
|
Steegmüller T, Kratky T, Gollwitzer L, Schwaminger SP, Berensmeier S. Development of a New Affinity Gold Polymer Membrane with Immobilized Protein A. Membranes (Basel) 2024; 14:31. [PMID: 38392658 PMCID: PMC10890041 DOI: 10.3390/membranes14020031] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/21/2023] [Revised: 01/08/2024] [Accepted: 01/19/2024] [Indexed: 02/24/2024]
Abstract
New and highly selective stationary phases for affinity membrane chromatography have the potential to significantly enhance the efficiency and specificity of therapeutic protein purification by reduced mass transfer limitations. This work developed and compared different immobilization strategies for recombinant Protein A ligands to a gold-sputtered polymer membrane for antibody separation in terms of functionalization and immobilization success, protein load, and stability. Successful, functionalization was validated via X-ray photoelectron spectroscopy (XPS). Here, a recombinant Protein A ligand was coupled by N-hydroxysuccinimide (NHS)/N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide (EDC) chemistry to carboxy-functionalized, gold-sputtered membranes. We achieved a binding capacity of up to 104 ± 17 mg of the protein ligand per gram of the gold-sputtered membrane. The developed membranes were able to successfully capture and release the monoclonal antibody (mAb) Trastuzumab, as well as antibodies from fresh frozen human blood plasma in both static and dynamic setups. Therefore, they demonstrated successful functionalization and immobilization strategies. The antibody load was tested using bicinchoninic acid (BCA), ultraviolet-visible spectroscopy (UV-vis) measurements, and sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The outcome is a fully functional affinity membrane that can be implemented in a variety of different antibody purification processes, eliminating the need for creating individualized strategies for modifying the surface to suit different substrates or conditions.
Collapse
Affiliation(s)
- Tobias Steegmüller
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany
| | - Tim Kratky
- Associate Professorship Physical Chemistry with Focus on Catalysis, TUM School of Natural Sciences, Technical University of Munich, Lichtenbergstraße 4, 85748 Garching, Germany
| | - Lena Gollwitzer
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany
| | - Sebastian Patrick Schwaminger
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany
- Division of Medicinal Chemistry, Otto-Loewi Research Center, Medical University of Graz, Neue Stiftingtalstraße 6, 8010 Graz, Austria
- BioTechMed-Graz, Mozartgasse 12, 8010 Graz, Austria
| | - Sonja Berensmeier
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany
- Munich Institute of Integrated Materials, Energy and Process Engineering, Technical University of Munich, Lichtenbergstraße 4a, 85748 Garching, Germany
| |
Collapse
|
6
|
Turrina C, Cookman J, Bellan R, Song J, Paar M, Dankers PYW, Berensmeier S, Schwaminger SP. Iron Oxide Nanoparticles with Supramolecular Ureido-Pyrimidinone Coating for Antimicrobial Peptide Delivery. Int J Mol Sci 2023; 24:14649. [PMID: 37834098 PMCID: PMC10573039 DOI: 10.3390/ijms241914649] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/03/2023] [Revised: 09/15/2023] [Accepted: 09/16/2023] [Indexed: 10/15/2023] Open
Abstract
Antimicrobial peptides (AMPs) can kill bacteria by disrupting their cytoplasmic membrane, which reduces the tendency of antibacterial resistance compared to conventional antibiotics. Their possible toxicity to human cells, however, limits their applicability. The combination of magnetically controlled drug delivery and supramolecular engineering can help to reduce the dosage of AMPs, control the delivery, and improve their cytocompatibility. Lasioglossin III (LL) is a natural AMP form bee venom that is highly antimicrobial. Here, superparamagnetic iron oxide nanoparticles (IONs) with a supramolecular ureido-pyrimidinone (UPy) coating were investigated as a drug carrier for LL for a controlled delivery to a specific target. Binding to IONs can improve the antimicrobial activity of the peptide. Different transmission electron microscopy (TEM) techniques showed that the particles have a crystalline iron oxide core with a UPy shell and UPy fibers. Cytocompatibility and internalization experiments were carried out with two different cell types, phagocytic and nonphagocytic cells. The drug carrier system showed good cytocompatibility (>70%) with human kidney cells (HK-2) and concentration-dependent toxicity to macrophagic cells (THP-1). The particles were internalized by both cell types, giving them the potential for effective delivery of AMPs into mammalian cells. By self-assembly, the UPy-coated nanoparticles can bind UPy-functionalized LL (UPy-LL) highly efficiently (99%), leading to a drug loading of 0.68 g g-1. The binding of UPy-LL on the supramolecular nanoparticle system increased its antimicrobial activity against E. coli (MIC 3.53 µM to 1.77 µM) and improved its cytocompatible dosage for HK-2 cells from 5.40 µM to 10.6 µM. The system showed higher cytotoxicity (5.4 µM) to the macrophages. The high drug loading, efficient binding, enhanced antimicrobial behavior, and reduced cytotoxicity makes ION@UPy-NH2 an interesting drug carrier for AMPs. The combination with superparamagnetic IONs allows potential magnetically controlled drug delivery and reduced drug amount of the system to address intracellular infections or improve cancer treatment.
Collapse
Affiliation(s)
- Chiara Turrina
- Chair of Bioseparation Engineering, School of Engineering and Design, Technical University of Munich, Boltzmannstr. 15, 85748 Garching, Germany; (C.T.)
| | - Jennifer Cookman
- Department of Chemical Sciences, Bernal Institute, University of Limerick, V94 T9PX Castletroy, Ireland;
| | - Riccardo Bellan
- Department of Biomedical Engineering, Institute for Complex Molecular Systems, Eindhoven University of Technology, 5600 MB Eindhoven, The Netherlands; (R.B.)
| | - Jiankang Song
- Department of Biomedical Engineering, Institute for Complex Molecular Systems, Eindhoven University of Technology, 5600 MB Eindhoven, The Netherlands; (R.B.)
| | - Margret Paar
- Division of Medicinal Chemistry, Otto Loewi Research Center, Medical University of Graz, Neue Stiftingtalstraße 6, 8010 Graz, Austria
| | - Patricia Y. W. Dankers
- Department of Biomedical Engineering, Institute for Complex Molecular Systems, Eindhoven University of Technology, 5600 MB Eindhoven, The Netherlands; (R.B.)
| | - Sonja Berensmeier
- Chair of Bioseparation Engineering, School of Engineering and Design, Technical University of Munich, Boltzmannstr. 15, 85748 Garching, Germany; (C.T.)
| | - Sebastian P. Schwaminger
- Chair of Bioseparation Engineering, School of Engineering and Design, Technical University of Munich, Boltzmannstr. 15, 85748 Garching, Germany; (C.T.)
- Division of Medicinal Chemistry, Otto Loewi Research Center, Medical University of Graz, Neue Stiftingtalstraße 6, 8010 Graz, Austria
- BioTechMed-Graz, Mozartgasse 12, 8010 Graz, Austria
| |
Collapse
|
7
|
Turrina C, Schoenen M, Milani D, Klassen A, Rojas Gonzaléz DM, Cvirn G, Mela P, Berensmeier S, Slabu I, Schwaminger SP. Application of magnetic iron oxide nanoparticles: Thrombotic activity, imaging and cytocompatibility of silica-coated and carboxymethyl dextrane-coated particles. Colloids Surf B Biointerfaces 2023; 228:113428. [PMID: 37379701 DOI: 10.1016/j.colsurfb.2023.113428] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/25/2023] [Revised: 06/19/2023] [Accepted: 06/21/2023] [Indexed: 06/30/2023]
Abstract
Coated iron oxide nanoparticles (IONs) are promising candidates for various applications in nanomedicine, including imaging, magnetic hyperthermia, and drug delivery. The application of IONs in nanomedicine is influenced by factors such as biocompatibility, surface properties, agglomeration, degradation behavior, and thrombogenicity. Therefore, it is essential to investigate the effects of coating material and thickness on the behavior and performance of IONs in the human body. In this study, IONs with a carboxymethyl dextran (CMD) coating and two thicknesses of silica coating (TEOS0.98, and TEOS3.91) were screened and compared to bare iron oxide nanoparticles (BIONs). All three coated particles showed good cytocompatibility (>70%) when tested with smooth muscle cells over three days. To investigate their potential long term behavior inside the human body, the Fe2+ release and hydrodynamic diameters of silica-coated and CMD (carboxymethyl dextrane)-coated IONs were analyzed in simulated body fluids for 72 h at 37 °C. The ION@CMD showed moderate agglomeration of around 100 nm in all four simulated fluids and dissolved faster than the silica-coated particles in artificial exosomal fluid and artificial lysosomal fluid. The particles with silica coating agglomerated in all tested simulated media above 1000 nm. Increased thickness of the silica coating led to decreased degradation of particles. Additionally, CMD coating resulted in nanoparticles with the least prothrombotic activity, and the thick silica coating apparently decreased the prothrombotic properties of nanoparticles compared to BIONs and ION@TEOS0.98. For magnetic resonance applications, ION@CMD and ION@TEOS3.91 showed comparatively high relaxation rates R2 values. In magnetic particle imaging experiments ION@TEOS3.91 yielded the highest normalized signal to noise ratio values and in magnetic hyperthermia studies, ION@CMD and ION@TEOS0.98 showed similar specific loss power. These findings demonstrate the potential of coated IONs in nanomedicine and emphasize the importance of understanding the effect of coating material and thickness on their behavior and performance in the human body.
Collapse
Affiliation(s)
- Chiara Turrina
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany
| | - Max Schoenen
- Institute of Applied Medical Engineering, Helmholtz Institute, Medical Faculty, RWTH Aachen University, Pauwelsstraße 20, 52074 Aachen, Germany
| | - Davide Milani
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany
| | - Anna Klassen
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany
| | - Diana M Rojas Gonzaléz
- Chair of Medical Materials and Implants, TUM School of Engineering and Design, Munich Institute of Biomedical Engineering, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany
| | - Gerhard Cvirn
- Division of Medicinal Chemistry, Otto Loewi Research Center, Medical University of Graz, Neue Stiftingtalstraße 6, 8010 Graz, Austria
| | - Petra Mela
- Chair of Medical Materials and Implants, TUM School of Engineering and Design, Munich Institute of Biomedical Engineering, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany
| | - Sonja Berensmeier
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany
| | - Ioana Slabu
- Institute of Applied Medical Engineering, Helmholtz Institute, Medical Faculty, RWTH Aachen University, Pauwelsstraße 20, 52074 Aachen, Germany
| | - Sebastian P Schwaminger
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany; Division of Medicinal Chemistry, Otto Loewi Research Center, Medical University of Graz, Neue Stiftingtalstraße 6, 8010 Graz, Austria; BioTechMed, Mozartgasse 12, 8010 Graz, Austria.
| |
Collapse
|
8
|
Turrina C, Klassen A, Milani D, Rojas-González DM, Ledinski G, Auer D, Sartori B, Cvirn G, Mela P, Berensmeier S, Schwaminger SP. Superparamagnetic iron oxide nanoparticles for their application in the human body: Influence of the surface. Heliyon 2023; 9:e16487. [PMID: 37274707 PMCID: PMC10238907 DOI: 10.1016/j.heliyon.2023.e16487] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/15/2023] [Revised: 05/16/2023] [Accepted: 05/18/2023] [Indexed: 06/06/2023] Open
Abstract
Iron oxide nanoparticles (IONs) are of great interest in nanomedicine for imaging, drug delivery, or for hyperthermia treatment. Although many research groups have focused on the synthesis and application of IONs in nanomedicine, little is known about the influence of the surface properties on the particles' behavior in the human body. This study analyzes the impact of surface coatings (dextran, polyvinyl alcohol, polylactide-co-glycolide) on the nanoparticles' cytocompatibility, agglomeration, degradation, and the resulting oxidative stress induced by the particle degradation. All particles, including bare IONs (BIONs), are highly cytocompatible (>70%) and show no significant toxicity towards smooth muscle cells. Small-angle X-ray scattering profiles visualize the aggregation behavior of nanoparticles and yield primary particle sizes of around 20 nm for the investigated nanoparticles. A combined experimental setup of dynamic light scattering and phenanthroline assay was used to analyze the long-term agglomeration and degradation profile of IONs in simulated body fluids, allowing fast screening of multiple candidates. All particles degraded in simulated endosomal and lysosomal fluid, confirming the pH-dependent dissolution. The degradation rate decreased with the shrinking size of particles leading to a plateau. The fastest Fe2+ release could be measured for the polyvinyl-coated IONs. The analytical setup is ideal for a quick preclinical study of IONs, giving often neglected yet crucial information about the behavior and toxicity of nanoparticles in the human body. Moreover, this study allows for the development and evaluation of novel ferroptosis-inducing agents.
Collapse
Affiliation(s)
- Chiara Turrina
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Germany
| | - Anna Klassen
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Germany
| | - Davide Milani
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Germany
| | - Diana M. Rojas-González
- Chair of Medical Materials and Implants, TUM School of Engineering and Design, Munich Institute of Biomedical Engineering, Technical University of Munich, Germany
| | - Gerhard Ledinski
- Division of Medicinal Chemistry, Otto Loewi Research Center, Medical University of Graz, Austria
| | - Doris Auer
- Division of Medical Physics and Biophysics, Gottfried Schatz Research Center, Medical University of Graz, Austria
| | - Barbara Sartori
- Institute of Inorganic Chemistry, Graz University of Technology, Stremayrgasse 9/IV, Graz, 8010, Austria
| | - Gerhard Cvirn
- Division of Medicinal Chemistry, Otto Loewi Research Center, Medical University of Graz, Austria
| | - Petra Mela
- Chair of Medical Materials and Implants, TUM School of Engineering and Design, Munich Institute of Biomedical Engineering, Technical University of Munich, Germany
| | - Sonja Berensmeier
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Germany
| | - Sebastian P. Schwaminger
- Chair of Bioseparation Engineering, TUM School of Engineering and Design, Technical University of Munich, Germany
- Division of Medicinal Chemistry, Otto Loewi Research Center, Medical University of Graz, Austria
- BioTechMed-Graz, Austria
| |
Collapse
|
9
|
Spicher MT, Schwaminger SP, von der Haar-Leistl D, Reindl M, Wagner FE, Berensmeier S. Interaction and mechanisms in the phosphate-binding of iron(oxyhydr)oxide core-shell nanoparticles. J Colloid Interface Sci 2023; 634:418-430. [PMID: 36542971 DOI: 10.1016/j.jcis.2022.12.035] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/18/2022] [Revised: 12/05/2022] [Accepted: 12/07/2022] [Indexed: 12/14/2022]
Abstract
HYPOTHESIS The high binding affinity of iron(oxyhydr)oxides for phosphate has recently been used in medicine to treat hyperphosphatemia, an abnormally elevated phosphate concentration in the blood. For iron(oxyhydr)oxide nanoparticles, the composition of the organic shell has a more significant influence on their interaction with phosphate than is often assumed. This study shows different mechanisms in phosphate binding, using the example of two similar new phosphate-binding agents. EXPERIMENTS We characterized the phosphate-binding behavior of two iron(oxyhydr)oxide-based nanomaterials with similar composition and particle properties and investigated their binding mechanisms by spectroscopic methods. FINDINGS For the often prescribed Velphoro, we demonstrated a phosphate binding capacity of>210 mg/g. A similar active ingredient named C-PAM binds over 573 mg/g. Spectroscopic measurements highlighted differences in the binding mechanism. While Velphoro binds phosphate via surface complexation independent of pH and adsorbent concentration, C-PAM shows a strong concentration dependence. At low concentrations, phosphate is bound via complexation reactions. The iron(oxyhydr)oxide structure was dissolved at higher phosphate concentrations and formed various iron phosphate species. The substances behave differently upon interaction with phosphate, although being very similar in composition and crystal structure. Thus, we demonstrated a crucial influence of the ligands in the shell on the binding mechanism.
Collapse
Affiliation(s)
- Magdalena Teresa Spicher
- Fraunhofer Institute for Process Engineering and Packaging (IVV), Giggenhauser Str. 35, 85354 Freising, Germany; Chair of Bioseparation Engineering, School of Engineering and Design, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany.
| | - Sebastian Patrick Schwaminger
- Chair of Bioseparation Engineering, School of Engineering and Design, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany; Department of Chemical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, 02139 Cambridge, MA, United States; Division of Medicinal Chemistry, Otto Loewi Research Center, Medical University of Graz, Neue Stiftingtalstraße 6, 8010 Graz, Austria; BioTechMed-Graz, Austria.
| | - Daniela von der Haar-Leistl
- Fraunhofer Institute for Process Engineering and Packaging (IVV), Giggenhauser Str. 35, 85354 Freising, Germany.
| | - Marco Reindl
- Division of Medicinal Chemistry, Otto Loewi Research Center, Medical University of Graz, Neue Stiftingtalstraße 6, 8010 Graz, Austria.
| | - Friedrich Ernst Wagner
- Department of Physics, Technical University of Munich, James-Franck-Straße 1, 85748 Garching, Germany.
| | - Sonja Berensmeier
- Chair of Bioseparation Engineering, School of Engineering and Design, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany.
| |
Collapse
|
10
|
Abarca-Cabrera L, Xu L, Berensmeier S, Fraga-García P. Competition at the Bio-nano Interface: A Protein, a Polysaccharide, and a Fatty Acid Adsorb onto Magnetic Nanoparticles. ACS Appl Bio Mater 2023; 6:146-156. [PMID: 36503228 DOI: 10.1021/acsabm.2c00812] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
Abstract
Magnetic nanoparticles are an attractive bioseparation tool due to their magnetic susceptibility and high adsorption capacity for different types of molecules. A major challenge for separation is to generate selectivity for a target molecule, or for a group of molecules in complex environments such as cell lysates. It is crucial to understand the factors that determine the targets' adsorption behavior in mixtures for triggering intended interactions and selectivity. Here we use a model system containing three molecules, each of them a common representative of the more abundant types of macromolecules in living systems: sodium oleate (SO), a fatty acid; bovine serum albumin (BSA), a protein; and dextran, a polysaccharide. Our results show that (a) the BSA adsorption capacity on the iron oxide material depends markedly on the pH, with the maximum capacity at the pI of the protein (0.39 g gMNP-1 ); (b) sodium oleate, a strongly negatively charged molecule, an organic anion, renders a maximum adsorption capacity of 0.40 g gMNP-1, even at pHs at which oleate as well as the nanoparticle surface are negatively charged; (c) the adsorbed masses of dextran, a neutral sugar, are lower than for the other two molecules, between 0.09 and 0.13 g gMNP-1, regardless of the system's pH. We observe an unexpected behavior in mixtures: SO completely prevents the adsorption of BSA, and dextran decreases the adsorption of the other competitors, SO and BSA, while adsorbing at the same capacities, unaffected by either the presence of the other two molecules or the pH. BSA does not decrease the oleate adsorption capacity. We demonstrate the essential role of pH in the adsorption of BSA (a protein) and SO (a fatty acid), as well as its impact in the structural organization of the oleate molecules in water. Moreover, we present exciting data on the adsorption of the molecules in competition, revealing the need to focus on interaction studies in more complex environments. This study attempts to open the scope of the current research of bio-nano interactions to not only proteins but also to mixtures, and generally to molecules with other physicochemical characteristics. Furthermore, we contribute to the understanding of multicomponent systems with the vision set in enhancing biomass exploitation and biofractionation processes.
Collapse
Affiliation(s)
- Lucía Abarca-Cabrera
- Bioseparation Engineering Group, Department of Energy and Process Engineering, TUM School of Engineering and Design, Technical University of Munich, Garching 85748, Germany
| | - Lianxin Xu
- Bioseparation Engineering Group, Department of Energy and Process Engineering, TUM School of Engineering and Design, Technical University of Munich, Garching 85748, Germany
| | - Sonja Berensmeier
- Bioseparation Engineering Group, Department of Energy and Process Engineering, TUM School of Engineering and Design, Technical University of Munich, Garching 85748, Germany
| | - Paula Fraga-García
- Bioseparation Engineering Group, Department of Energy and Process Engineering, TUM School of Engineering and Design, Technical University of Munich, Garching 85748, Germany
| |
Collapse
|
11
|
Turrina C, Dankers PYW, Berensmeier S, Schwaminger S. Iron oxide nanoparticles with supramolecular ureidopyrimidinone coating. Current Directions in Biomedical Engineering 2022. [DOI: 10.1515/cdbme-2022-1004] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022] Open
Abstract
Abstract
Superparamagnetic iron oxide nanoparticles are a promising material in nanomedicine, especially for generating magnetically controlled drug delivery systems. We developed an innovative ureidopyrimidinone (UPy) coating based on supramolecular hydrogen bonding units. The synthesized nanoparticles possess a positively charged surface with a hydrodynamic diameter of 177 nm at pH 7 and magnetization of 31 emu g-1. The system has the potential to be modified by drugs or bioactive molecules altered with UPy units.
Collapse
Affiliation(s)
- Chiara Turrina
- Technical University of Munich,School of Engineering and Desing, Munich , Germany
| | - Patricia Y. W. Dankers
- Eindhoven University of Technology, Department of Biomedical Engineering, Eindhoven , Netherlands
| | - Sonja Berensmeier
- Technical University of Munich,School of Engineering and Desing, Munich , Germany
| | - Sebastian Schwaminger
- Technical University of Munich, School of Engineering and Design, Munich , Germany
- Medical University Graz, Stiftingtalstrase 6, Graz , Austria
| |
Collapse
|
12
|
Berensmeier S, Rauwolf S, Zanker A, Steegmüller T, Schwaminger S. One Multifunctional Affinity Peptide Tag for Different Non‐Functionalized Materials and Applications. CHEM-ING-TECH 2022. [DOI: 10.1002/cite.202255251] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Affiliation(s)
- S. Berensmeier
- TU Munich Bioseparation Engineering Group Boltzmannstr. 15 85748 Garching Germany
| | - S. Rauwolf
- TU Munich Bioseparation Engineering Group Boltzmannstr. 15 85748 Garching Germany
| | - A. Zanker
- TU Munich Bioseparation Engineering Group Boltzmannstr. 15 85748 Garching Germany
| | - T. Steegmüller
- TU Munich Bioseparation Engineering Group Boltzmannstr. 15 85748 Garching Germany
| | - S. P. Schwaminger
- TU Munich Bioseparation Engineering Group Boltzmannstr. 15 85748 Garching Germany
| |
Collapse
|
13
|
Suyetin M, Rauwolf S, Schwaminger SP, Turrina C, Wittmann L, Bag S, Berensmeier S, Wenzel W. Peptide adsorption on silica surfaces: Simulation and experimental insights. Colloids Surf B Biointerfaces 2022; 218:112759. [PMID: 36027680 DOI: 10.1016/j.colsurfb.2022.112759] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/10/2022] [Revised: 08/02/2022] [Accepted: 08/04/2022] [Indexed: 11/16/2022]
Abstract
The understanding of interactions between proteins with silica surface is crucial for a wide range of different applications: from medical devices, drug delivery and bioelectronics to biotechnology and downstream processing. We show the application of EISM (Effective Implicit Surface Model) for discovering the set of peptide interactions with silica surface. The EISM is employed for a high-speed computational screening of peptides to model the binding affinity of small peptides to silica surfaces. The simulations are complemented with experimental data of peptides with silica nanoparticles from microscale thermophoresis and from infrared spectroscopy. The experimental work shows excellent agreement with computational results and verifies the EISM model for the prediction of peptide-surface interactions. 57 peptides, with amino acids favorable for adsorption on Silica surface, are screened by EISM model for obtaining results, which are worth to be considered as a guidance for future experimental and theoretical works. This model can be used as a broad platform for multiple challenges at surfaces which can be applied for multiple surfaces and biomolecules beyond silica and peptides.
Collapse
Affiliation(s)
- Mikhail Suyetin
- Institute of Nanotechnology, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344, Eggenstein-Leopoldshafen, Germany
| | - Stefan Rauwolf
- Bioseparation Engineering Group, School of Engineering and Design, Technical University of Munich, 85748, Garching, Germany
| | - Sebastian Patrick Schwaminger
- Bioseparation Engineering Group, School of Engineering and Design, Technical University of Munich, 85748, Garching, Germany; Division of Medicinal Chemistry, Otto Loewi Research Center, Medical University of Graz, 8010, Graz, Austria.
| | - Chiara Turrina
- Bioseparation Engineering Group, School of Engineering and Design, Technical University of Munich, 85748, Garching, Germany
| | - Leonie Wittmann
- Bioseparation Engineering Group, School of Engineering and Design, Technical University of Munich, 85748, Garching, Germany
| | - Saientan Bag
- Institute of Nanotechnology, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344, Eggenstein-Leopoldshafen, Germany
| | - Sonja Berensmeier
- Bioseparation Engineering Group, School of Engineering and Design, Technical University of Munich, 85748, Garching, Germany.
| | - Wolfgang Wenzel
- Institute of Nanotechnology, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344, Eggenstein-Leopoldshafen, Germany.
| |
Collapse
|
14
|
Schwaminger SP, Zimmermann I, Berensmeier S. Current research approaches in downstream processing of pharmaceutically relevant proteins. Curr Opin Biotechnol 2022; 77:102768. [PMID: 35930843 DOI: 10.1016/j.copbio.2022.102768] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/14/2022] [Revised: 07/04/2022] [Accepted: 07/12/2022] [Indexed: 11/03/2022]
Abstract
Biopharmaceuticals and their production are on the rise. They are needed to treat and to prevent multiple diseases. Therefore, an urgent need for process intensification in downstream processing (DSP) has been identified to produce biopharmaceuticals more efficiently. The DSP currently accounts for the majority of production costs of pharmaceutically relevant proteins. This short review gathers essential research over the past 3 years that addresses novel solutions to overcome this bottleneck. The overview includes promising studies in the fields of chromatography, aqueous two-phase systems, precipitation, crystallization, magnetic separation, and filtration for the purification of pharmaceutically relevant proteins.
Collapse
Affiliation(s)
- Sebastian P Schwaminger
- Division of Medicinal Chemistry, Otto Loewi Research Center, Medical University of Graz, Graz, Austria; Bioseparation Engineering Group, School of Engineering and Design, Technical University of Munich, Garching, Germany.
| | - Ines Zimmermann
- Bioseparation Engineering Group, School of Engineering and Design, Technical University of Munich, Garching, Germany
| | - Sonja Berensmeier
- Bioseparation Engineering Group, School of Engineering and Design, Technical University of Munich, Garching, Germany.
| |
Collapse
|
15
|
Ostertag F, Sommer D, Berensmeier S, Hinrichs J. Development and validation of an enzyme-linked immunosorbent assay for the determination of bovine lactoferrin in various milk products. Int Dairy J 2022. [DOI: 10.1016/j.idairyj.2021.105246] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022]
|
16
|
Mueller KM, Topping GJ, Schwaminger SP, Zou Y, Rojas-González DM, De-Juan-Pardo EM, Berensmeier S, Schilling F, Mela P. Towards Clinical Translation of Melt Electrowritten Scaffolds: Visualisation of USPIO Labelled Polycaprolactone Scaffolds by Magnetic Resonance Imaging. Eur J Vasc Endovasc Surg 2022. [DOI: 10.1016/j.ejvs.2021.12.031] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/03/2022]
|
17
|
Zanker AA, Stargardt P, Kurzbach SC, Turrina C, Mairhofer J, Schwaminger SP, Berensmeier S. Direct capture and selective elution of a secreted polyglutamate-tagged nanobody using bare magnetic nanoparticles. Biotechnol J 2022; 17:e2100577. [PMID: 35085417 DOI: 10.1002/biot.202100577] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/26/2021] [Revised: 01/11/2022] [Accepted: 01/12/2022] [Indexed: 11/07/2022]
Abstract
BACKGROUND The secretion and direct capture of proteins from the extracellular medium is a promising approach for purification, thus enabling integrated bioprocesses. MAJOR RESULTS We demonstrate the secretion of a nanobody (VHH) to the extracellular medium (EM) and its direct capture by bare, non-functionalized magnetic nanoparticles (MNPs). An ompA signal peptide for periplasmic localization, a polyglutamate-tag (E8 ) for selective MNP binding, and a factor Xa protease cleavage site were fused N-terminally to the nanobody. The extracellular production of the E8 -VHH (36 mg L-1 ) was enabled using a growth-decoupled Escherichia coli-based expression system. The direct binding of E8 -VHH to the bare magnetic nanoparticles was possible and could be drastically improved up to a yield of 88% by adding polyethylene glycol (PEG). The selectivity of the polyglutamate-tag enabled a selective elution of the E8 -VHH from the bare MNPs while raising the concentration factor (5x) and purification factor (4x) significantly. CONCLUSION Our studies clearly show that the unique combination of a growth-decoupled E. coli secretion system, the polyglutamate affinity tag, non-functionalized magnetic nanoparticles, and affinity magnetic precipitation is an innovative and novel way to capture and concentrate nanobodies. This article is protected by copyright. All rights reserved.
Collapse
Affiliation(s)
- Alexander A Zanker
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Boltzmannstr. 15, Garching, 85748, Germany
| | | | - Sophie C Kurzbach
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Boltzmannstr. 15, Garching, 85748, Germany
| | - Chiara Turrina
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Boltzmannstr. 15, Garching, 85748, Germany
| | | | - Sebastian P Schwaminger
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Boltzmannstr. 15, Garching, 85748, Germany
| | - Sonja Berensmeier
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Boltzmannstr. 15, Garching, 85748, Germany
| |
Collapse
|
18
|
Berensmeier S. Downstream processing of bioproducts. Eng Life Sci 2021; 21:548. [PMID: 34690627 PMCID: PMC8518574 DOI: 10.1002/elsc.202000109] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Track Full Text] [Download PDF] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/14/2021] [Accepted: 09/17/2021] [Indexed: 11/17/2022] Open
Affiliation(s)
- Sonja Berensmeier
- Bioseparation Engineering Group Technical University Munich Munich Germany
| |
Collapse
|
19
|
Rauwolf S, Steegmüller T, Schwaminger SP, Berensmeier S. Purification of a peptide tagged protein via an affinity chromatographic process with underivatized silica. Eng Life Sci 2021; 21:549-557. [PMID: 34690628 PMCID: PMC8518568 DOI: 10.1002/elsc.202100019] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/03/2021] [Revised: 05/06/2021] [Accepted: 05/25/2021] [Indexed: 11/11/2022] Open
Abstract
Silica is widely used for chromatography resins due to its high mechanical strength, column efficiency, easy manufacturing (i.e. controlled size and porosity), and low-cost. Despite these positive attributes to silica, it is currently used as a backbone for chromatographic resins in biotechnological downstream processing. The aim of this study is to show how the octapeptide (RH)4 can be used as peptide tag for high-purity protein purification on bare silica. The tag possesses a high affinity to deprotonated silanol groups because the tag's arginine groups interact with the surface via an ion pairing mechanism. A chromatographic workflow to purify GFP fused with (RH)4 could be implemented. Purities were determined by SDS-PAGE and RP-HPLC. The equilibrium binding capacity of the fusion protein GFP-(RH)4 on silica is 450 mg/g and the dynamic binding capacity around 3 mg/mL. One-step purification from clarified lysate achieved a purity of 93% and a recovery of 94%. Overloading the column enhances the purity to >95%. Static experiments with different buffers showed variability of the method making the system independent from buffer choice. Our designed peptide tag allows bare silica to be utilized in preparative chromatography for downstream bioprocessing; thus, providing a cost saving factor regarding expensive surface functionalization. Underivatized silica in combination with our (RH)4 peptide tag allows the purification of proteins, in all scales, without relying on complex resins.
Collapse
Affiliation(s)
- Stefan Rauwolf
- Department of Mechanical EngineeringTechnical University of MunichMunichGermany
| | - Tobias Steegmüller
- Department of Mechanical EngineeringTechnical University of MunichMunichGermany
| | | | - Sonja Berensmeier
- Department of Mechanical EngineeringTechnical University of MunichMunichGermany
| |
Collapse
|
20
|
Rauwolf S, Bag S, Rouqueiro R, Schwaminger SP, Dias-Cabral AC, Berensmeier S, Wenzel W. Insights on Alanine and Arginine Binding to Silica with Atomic Resolution. J Phys Chem Lett 2021; 12:9384-9390. [PMID: 34551250 DOI: 10.1021/acs.jpclett.1c02398] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Interactions of biomolecules with inorganic oxide surfaces such as silica in aqueous solutions are of profound interest in various research fields, including chemistry, biotechnology, and medicine. While there is a general understanding of the dominating electrostatic interactions, the binding mechanism is still not fully understood. Here, chromatographic zonal elution and flow microcalorimetry experiments were combined with molecular dynamic simulations to describe the interaction of different capped amino acids with the silica surface. We demonstrate that ion pairing is the dominant electrostatic interaction. Surprisingly, the interaction strength is more dependent on the repulsive carboxy group than on the attracting amino group. These findings are essential for conducting experimental and simulative studies on amino acids when transferring the results to biomolecule-surface interactions.
Collapse
Affiliation(s)
- Stefan Rauwolf
- Department Mechanical Engineering, Bioseparation Engineering Group, Technical University of Munich, Boltzmannstrasse 15, 85748 Garching, Germany
| | - Saientan Bag
- Institute for Nanotechnology, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany
| | - Rodrigo Rouqueiro
- Department of Chemistry, CICS-UBI Health Science Research Center, University Beira Interior, Avenida Infante D. Henrique, 6200-506 Covilhã, Portugal
| | - Sebastian Patrick Schwaminger
- Department Mechanical Engineering, Bioseparation Engineering Group, Technical University of Munich, Boltzmannstrasse 15, 85748 Garching, Germany
| | - Ana Cristina Dias-Cabral
- Department of Chemistry, CICS-UBI Health Science Research Center, University Beira Interior, Avenida Infante D. Henrique, 6200-506 Covilhã, Portugal
| | - Sonja Berensmeier
- Department Mechanical Engineering, Bioseparation Engineering Group, Technical University of Munich, Boltzmannstrasse 15, 85748 Garching, Germany
| | - Wolfgang Wenzel
- Institute for Nanotechnology, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany
| |
Collapse
|
21
|
Schwaminger SP, Fehn S, Steegmüller T, Rauwolf S, Löwe H, Pflüger-Grau K, Berensmeier S. Immobilization of PETase enzymes on magnetic iron oxide nanoparticles for the decomposition of microplastic PET. Nanoscale Adv 2021; 3:4395-4399. [PMID: 36133462 PMCID: PMC9417550 DOI: 10.1039/d1na00243k] [Citation(s) in RCA: 24] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/31/2021] [Accepted: 06/14/2021] [Indexed: 05/12/2023]
Abstract
Polyethylene terephthalate (PET) is responsible for a large amount of environmental contamination with microplastics. Based on its high affinity, the PET degrading enzyme PETase can be immobilized on superparamagnetic iron oxide nanoparticles through a His-tag. The His-tag increases enzyme stability, and allows magnetic separation for recovery. Multiple recycling steps are possible and microplastic particles can be decomposed depending on the PET's crystallinity. The separation or decomposition of PET allows for a sustainable way to remove microplastic from water.
Collapse
Affiliation(s)
- Sebastian P Schwaminger
- Department of Mechanical Engineering, Bioseparation Engineering Group, Technical University of Munich Garching Germany
| | - Stefan Fehn
- Department of Mechanical Engineering, Bioseparation Engineering Group, Technical University of Munich Garching Germany
| | - Tobias Steegmüller
- Department of Mechanical Engineering, Bioseparation Engineering Group, Technical University of Munich Garching Germany
| | - Stefan Rauwolf
- Department of Mechanical Engineering, Bioseparation Engineering Group, Technical University of Munich Garching Germany
| | - Hannes Löwe
- Department of Mechanical Engineering, Systems Biotechnology, Technical University of Munich Garching Germany
| | - Katharina Pflüger-Grau
- Department of Mechanical Engineering, Systems Biotechnology, Technical University of Munich Garching Germany
| | - Sonja Berensmeier
- Department of Mechanical Engineering, Bioseparation Engineering Group, Technical University of Munich Garching Germany
| |
Collapse
|
22
|
Mueller KMA, Topping GJ, Schwaminger SP, Zou Y, Rojas-González DM, De-Juan-Pardo EM, Berensmeier S, Schilling F, Mela P. Visualization of USPIO-labeled melt-electrowritten scaffolds by non-invasive magnetic resonance imaging. Biomater Sci 2021; 9:4607-4612. [PMID: 34096938 DOI: 10.1039/d1bm00461a] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/01/2023]
Abstract
Melt electrowriting (MEW) is a high-resolution fiber-forming technology for the digital fabrication of complex micro-structured scaffolds for tissue engineering, which has convincingly shown its potential in in vitro and in vivo animal studies. The clinical translation of such constructs to the patient requires the capability to visualize them upon implantation with clinically accepted methods such as magnetic resonance imaging (MRI). To this end, this work presents the modification of polycaprolactone (PCL) scaffolds with ultrasmall superparamagnetic iron oxide (USPIO) nanoparticles to render them visualizable by MRI. Composite scaffolds containing up to 0.3 weight % USPIOs were 3D printed by MEW and could be sensitively detected in vitro using T2- and T2*-weighted MRI. At the same time, USPIO incorporation did not affect the usability of PCL for tissue engineering applications as demonstrated by the mechanical and cytocompatibility evaluation. Concentrations up to 0.2% caused small to no decrease in the ultimate tensile strength and Young's modulus. Cytocompatibility tests resulted in excellent cell viability, with proliferating cells adhering to all the scaffolds. This work contributes to the materials library for MEW and opens the possibility of using MRI for longitudinal monitoring of MEW grafts.
Collapse
Affiliation(s)
- Kilian M A Mueller
- Chair of Medical Materials and Implants, Department of Mechanical Engineering and Munich School of BioEngineering, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany.
| | - Geoffrey J Topping
- Department of Nuclear Medicine, School of Medicine, Klinikum rechts der Isar, Technical University of Munich, Ismaninger Straße 22, D-81675 Munich, Germany
| | - Sebastian P Schwaminger
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany
| | - Younzhe Zou
- Chair of Medical Materials and Implants, Department of Mechanical Engineering and Munich School of BioEngineering, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany.
| | - Diana M Rojas-González
- Chair of Medical Materials and Implants, Department of Mechanical Engineering and Munich School of BioEngineering, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany.
| | - Elena M De-Juan-Pardo
- Translational 3D Printing Laboratory for Advanced Tissue Engineering, Harry Perkins Institute of Medical Research, QEII Medical Centre, Nedlands and Centre for Medical Research, The University of Western Australia, Perth 6009, Australia
| | - Sonja Berensmeier
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany
| | - Franz Schilling
- Department of Nuclear Medicine, School of Medicine, Klinikum rechts der Isar, Technical University of Munich, Ismaninger Straße 22, D-81675 Munich, Germany
| | - Petra Mela
- Chair of Medical Materials and Implants, Department of Mechanical Engineering and Munich School of BioEngineering, Technical University of Munich, Boltzmannstraße 15, 85748 Garching, Germany.
| |
Collapse
|
23
|
Abstract
The adsorption and desorption of nucleic acid to a solid surface is ubiquitous in various research areas like pharmaceutics, nanotechnology, molecular biology, and molecular electronics. In spite of this widespread importance, it is still not well understood how the negatively charged deoxyribonucleic acid (DNA) binds to the negatively charged silica surface in an aqueous solution. In this article, we study the adsorption of DNA to the silica surface using both modeling and experiments and shed light on the complicated binding (DNA to silica) process. The binding agent mediated DNA adsorption was elegantly captured by cooperative Langmuir model. Bulk-depletion experiments were performed to conclude the necessity of a positively charged binding agent for efficient DNA binding, which complements the findings from the model. A profound understanding of DNA binding will help to tune various processes for efficient nucleic acid extraction and purification. However, this work goes beyond the DNA binding and can shed light on other binding agent mediated surface-surface, surface-molecule, molecule-molecule interaction.
Collapse
Affiliation(s)
- Saientan Bag
- Institute of Nanotechnology (INT), Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz Platz-1, 76344, Eggenstein-Leopoldshafen, Germany
| | - Stefan Rauwolf
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich (TUM), Munich 85748, Germany
| | - Sebastian P Schwaminger
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich (TUM), Munich 85748, Germany
| | - Wolfgang Wenzel
- Institute of Nanotechnology (INT), Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz Platz-1, 76344, Eggenstein-Leopoldshafen, Germany
| | - Sonja Berensmeier
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich (TUM), Munich 85748, Germany
| |
Collapse
|
24
|
Wagner R, Bag S, Trunzer T, Fraga-García P, Wenzel W, Berensmeier S, Franzreb M. Adsorption of organic molecules on carbon surfaces: Experimental data and molecular dynamics simulation considering multiple protonation states. J Colloid Interface Sci 2021; 589:424-437. [DOI: 10.1016/j.jcis.2020.12.107] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/24/2020] [Revised: 12/12/2020] [Accepted: 12/27/2020] [Indexed: 02/07/2023]
|
25
|
Abstract
The detection of pathogens in aquatic environments issues a time-consuming challenge, but it is an essential task to prevent the spread of diseases. We have developed a new point-of-care (POC) method for the fast and efficient detection of Legionella pneumophila in water. The method consists first of the generation of immunocomplexes of bacteria species with its corresponding targeted fluorescence-labelled serogroup-specific antibodies, and second a concentration step of pathogens with a membrane filter. Third, on the filtration membrane, our method can detect the fluorescence intensity corresponding to the pathogen concentration. Thus selective and efficient evidence for the presence of bacteria can be evaluated. We tested our system on fluorescent Escherichia coli bacteria and were able to reach an accurate determination of 1000 cells. The technique was furthermore tested on Legionella pneumophila cells, which were labelled with fluorescence-labelled antibodies as a proof of principle. Furthermore, we were able to verify this method in the presence of other bacteria species. We were able to detect bacteria cells within half an hour, a substantial advancement compared to the prevailling state of the art detection method based on the cultivation of Legionella pneumophila. Hence, this system represents the basis for future developments in analysis of pathogens.
Collapse
Affiliation(s)
- Sebastian Schwaminger
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, 85748 Garching, Germany.
| | - Marina E Rottmueller
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, 85748 Garching, Germany.
| | - Ramona Fischl
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, 85748 Garching, Germany.
| | - Behnam Kalali
- Institute of Medical Microbiology, Immunology and Hygiene, Technical University of Munich, Munich, Germany
| | - Sonja Berensmeier
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, 85748 Garching, Germany.
| |
Collapse
|
26
|
Abarca-Cabrera L, Fraga-García P, Berensmeier S. Bio-nano interactions: binding proteins, polysaccharides, lipids and nucleic acids onto magnetic nanoparticles. Biomater Res 2021; 25:12. [PMID: 33883044 PMCID: PMC8059211 DOI: 10.1186/s40824-021-00212-y] [Citation(s) in RCA: 39] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/28/2020] [Accepted: 03/21/2021] [Indexed: 12/11/2022] Open
Abstract
The major interest in nanoparticles as an application platform for biotechnology arises from their high surface-to-volume ratio. Iron oxide nanoparticles (IONPs) are particularly appealing due to their superparamagnetic behavior, which enables bioseparation using external magnetic fields. In order to design advanced biomaterials, improve binding capacities and develop innovative processing solutions, a thorough understanding of the factors governing organic-inorganic binding in solution is critical but has not yet been achieved, given the wide variety of chemical and physical influences. This paper offers a critical review of experimental studies of the interactions between low cost IONPs (bare iron oxides, silica-coated or easily-functionalized surfaces) and the main groups of biomolecules: proteins, lipids, nucleic acids and carbohydrates. Special attention is devoted to the driving forces and interdependencies responsible of interactions at the solid-liquid interface, to the unique structural characteristics of each biomolecular class, and to environmental conditions influencing adsorption. Furthermore, studies focusing on mixtures, which are still rare, but absolutely necessary to understand the biocorona, are also included. This review concludes with a discussion of future work needed to fill the gaps in knowledge of bio-nano interactions, seeking to improve nanoparticles' targeting capabilities in complex systems, and to open the door for multipurpose recognition and bioseparation processes.
Collapse
Affiliation(s)
- Lucía Abarca-Cabrera
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, 85748, Garching bei München, Germany
| | - Paula Fraga-García
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, 85748, Garching bei München, Germany.
| | - Sonja Berensmeier
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, 85748, Garching bei München, Germany
| |
Collapse
|
27
|
Schwaminger SP, Brammen MW, Zunhammer F, Däumler N, Fraga-García P, Berensmeier S. Iron Oxide Nanoparticles: Multiwall Carbon Nanotube Composite Materials for Batch or Chromatographic Biomolecule Separation. Nanoscale Res Lett 2021; 16:30. [PMID: 33569639 PMCID: PMC7876204 DOI: 10.1186/s11671-021-03491-5] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/02/2020] [Accepted: 01/28/2021] [Indexed: 06/12/2023]
Abstract
Carbon-based materials are the spearhead of research in multiple fields of nanotechnology. Moreover, their role as stationary phase in chromatography is gaining relevance. We investigate a material consisting of multiwall carbon nanotubes (CNTs) and superparamagnetic iron oxide nanoparticles towards its use as a mixed-mode chromatography material. The idea is to immobilize the ion exchange material iron oxide on CNTs as a stable matrix for chromatography processes without a significant pressure drop. Iron oxide nanoparticles are synthesized and used to decorate the CNTs via a co-precipitation route. They bind to the walls of oxidized CNTs, thereby enabling to magnetically separate the composite material. This hybrid material is investigated with transmission electron microscopy, magnetometry, X-ray diffraction, X-ray photoelectron and Raman spectroscopy. Moreover, we determine its specific surface area and its wetting behavior. We also demonstrate its applicability as chromatography material for amino acid retention, describing the adsorption and desorption of different amino acids in a complex porous system surrounded by aqueous media. Thus, this material can be used as chromatographic matrix and as a magnetic batch adsorbent material due to the iron oxide nanoparticles. Our work contributes to current research on composite materials. Such materials are necessary for developing novel industrial applications or improving the performance of established processes.
Collapse
Affiliation(s)
- Sebastian P Schwaminger
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Boltzmannstraße 15, 85748, Garching, Germany.
| | - Markus W Brammen
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Boltzmannstraße 15, 85748, Garching, Germany
| | - Florian Zunhammer
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Boltzmannstraße 15, 85748, Garching, Germany
| | - Nicklas Däumler
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Boltzmannstraße 15, 85748, Garching, Germany
| | - Paula Fraga-García
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Boltzmannstraße 15, 85748, Garching, Germany
| | - Sonja Berensmeier
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Boltzmannstraße 15, 85748, Garching, Germany.
| |
Collapse
|
28
|
Bäumler M, Schwaminger SP, von der Haar-Leistl D, Schaper SJ, Müller-Buschbaum P, Wagner FE, Berensmeier S. Characterization of an active ingredient made of nanoscale iron(oxyhydr)oxide for the treatment of hyperphosphatemia. RSC Adv 2021; 11:17669-17682. [PMID: 35480163 PMCID: PMC9033185 DOI: 10.1039/d1ra00050k] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/04/2021] [Accepted: 05/02/2021] [Indexed: 12/28/2022] Open
Abstract
Kidney disease is one of the main non-communicable diseases. Every year millions of people worldwide die from kidney dysfunction. One cause is disturbances in the mineral metabolism, such as abnormally high phosphate concentrations in the blood, medically referred to as hyperphosphatemia. A new active ingredient based on nanoscale iron(oxyhydr)oxide with particle sizes below 3 nm surrounded by an organic coating has been developed for a more effective treatment. The examination of the structural properties of these particles within this study promises to gain further insights into this improved effectiveness. More than half of the active ingredient consists of organic substances, the rest is mostly iron(oxyhydr)oxide. Analyzes by transmission electron microscopy (TEM), small-angle X-ray scattering (SAXS), and dynamic light scattering (DLS) show that the organic molecules act as stabilizers and lead to ultrasmall iron(oxyhydr)oxide cores with a size of 1.0–2.8 nm. The nanoparticles coated with the organic molecules have an average size of 11.7 nm. At 4.2 K, the nanoparticles display a magnetic hyperfine field of 45.5 T in the Mössbauer spectrum, which is unusually low for iron(oxyhydr)oxide. The material is also not ferrimagnetic. Combining these results and taking into account the composition of the nanoparticles, we identify low crystalline ferrihydrite as the most likely phase in the iron(oxyhydr)oxide nuclei. At the same time, we want to emphasize that a final identification of the crystal structure in iron(oxyhydr)oxides can be impeded by ultrasmall particle sizes. In summary, by a combinatorial characterization, we are able to observe extraordinary properties of the ultrasmall nanomaterial, which is the basis for the investigation of the high phosphate-binding efficacy of this active ingredient. The combination of different analytical methods, supported by TEM, DLS, SAXS, Mössbauer spectroscopy, and SQUID, allows more accurate characterization of a new nanoscale active ingredient based on iron(oxyhydr)oxide against hyperphosphatemia.![]()
Collapse
Affiliation(s)
- Magdalena Bäumler
- Bioseparation Engineering Group
- Department of Mechanical Engineering
- Technical University of Munich
- Garching
- Germany
| | - Sebastian P. Schwaminger
- Bioseparation Engineering Group
- Department of Mechanical Engineering
- Technical University of Munich
- Garching
- Germany
| | - Daniela von der Haar-Leistl
- Fraunhofer Institute for Process Engineering and Packaging (IVV)
- Department of Process Development for Plant Raw Materials
- 85354 Freising
- Germany
| | - Simon J. Schaper
- Functional Materials Group
- Departement of Physics
- Technical University of Munich
- 85748 Garching
- Germany
| | - Peter Müller-Buschbaum
- Functional Materials Group
- Departement of Physics
- Technical University of Munich
- 85748 Garching
- Germany
| | - Friedrich E. Wagner
- Experimental Astro-Particle Physics Group
- Departement of Physics
- Technical University of Munich
- 85748 Garching
- Germany
| | - Sonja Berensmeier
- Bioseparation Engineering Group
- Department of Mechanical Engineering
- Technical University of Munich
- Garching
- Germany
| |
Collapse
|
29
|
Zanker AA, Ahmad N, Son TH, Schwaminger SP, Berensmeier S. Selective ene-reductase immobilization to magnetic nanoparticles through a novel affinity tag. Biotechnol J 2020; 16:e2000366. [PMID: 33245633 DOI: 10.1002/biot.202000366] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/26/2020] [Revised: 11/05/2020] [Indexed: 01/16/2023]
Abstract
BACKGROUND Magnetic nanoparticles (MNPs) are becoming more important as carriers, because of their large specific surface area and easy separability. They are increasingly used in enzyme technology, diagnostics, and drug delivery. MAJOR RESULTS For the directed and almost irreversible immobilization of proteins on MNPs, we have developed a new selective (His-Arg)4 peptide-tag, that binds fusion proteins directly from an E. coli cell lysate to non-functionalized, low-cost MNPs. Using the immobilization of an ene-reductase as an example, we could demonstrate that the fusion with this tag increases thermostability without reducing overall activity (ER w/o tag: t1/2 = 3.7 h, (HR)4 -ER: t1/2 = 9.9 h). Immobilization by adsorption in Tris buffer resulted in very high enzyme loads with approx. 380 mg g-1 and 67% residual activity. The immobilization on the MNPs allowed a fast concentration, buffer exchange, and reuse. While about 50% of the activity was lost after the first reuse, we were able to show that the activity did not decrease further and was stable for another nine cycles. CONCLUSION According to our studies, our tag highly works for any kind of immobilization on MNPs and holds the potential for enzyme immobilizations as well as for drug delivery and sensors.
Collapse
Affiliation(s)
- Alexander A Zanker
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Garching, Germany
| | - Nadim Ahmad
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Garching, Germany
| | - Tuan Hoang Son
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Garching, Germany
| | - Sebastian P Schwaminger
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Garching, Germany
| | - Sonja Berensmeier
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Garching, Germany
| |
Collapse
|
30
|
Candeago R, Kim K, Vapnik H, Cotty S, Aubin M, Berensmeier S, Kushima A, Su X. Semiconducting Polymer Interfaces for Electrochemically Assisted Mercury Remediation. ACS Appl Mater Interfaces 2020; 12:49713-49722. [PMID: 33079513 DOI: 10.1021/acsami.0c15570] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Nanostructured polymer interfaces can play a key role in addressing urgent challenges in water purification and advanced separations. Conventional technologies for mercury remediation often necessitate large energetic inputs, produce significant secondary waste, or when electrochemical, lead to strong irreversibility. Here, we propose the reversible, electrochemical capture and release of mercury, by modulating interfacial mercury deposition through a sulfur-containing, semiconducting redox polymer. Electrodeposition/stripping of mercury was carried out with a nanostructured poly(3-hexylthiophene-2,5-diyl)-carbon nanotube composite electrode, coated on titanium (P3HT-CNT/Ti). During electrochemical release, mercury was reversibly stripped in a non-acid electrolyte with 12-fold higher release kinetics compared to nonfunctionalized electrodes. In situ optical microscopy confirmed the rapid, reversible nature of the electrodeposition/stripping process with P3HT-CNT/Ti, indicating the key role of redox processes in mediating the mercury phase transition. The polymer-functionalized system exhibited high mercury removal efficiencies (>97%) in real wastewater matrices while bringing the final mercury concentrations down to <2 μg L-1. Moreover, an energy consumption analysis highlighted a 3-fold increase in efficiency with P3HT-CNT/Ti compared to titanium. Our study demonstrates the effectiveness of semiconducting redox polymers for reversible mercury deposition and points to future applications in mediating electrochemical stripping for various environmental applications.
Collapse
Affiliation(s)
- Riccardo Candeago
- Department of Chemical and Biomolecular Engineering, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801, United States
| | - Kwiyong Kim
- Department of Chemical and Biomolecular Engineering, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801, United States
| | - Haley Vapnik
- Department of Chemical and Biomolecular Engineering, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801, United States
| | - Stephen Cotty
- Department of Chemical and Biomolecular Engineering, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801, United States
| | - Megan Aubin
- Advanced Materials Processing and Analysis Center, Department of Materials Science and Engineering, University of Central Florida, Orlando, Florida 32816, United States
| | - Sonja Berensmeier
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Boltzmanstrasse 15, Garching 85748, Germany
| | - Akihiro Kushima
- Advanced Materials Processing and Analysis Center, Department of Materials Science and Engineering, University of Central Florida, Orlando, Florida 32816, United States
| | - Xiao Su
- Department of Chemical and Biomolecular Engineering, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801, United States
| |
Collapse
|
31
|
Bag S, Rauwolf S, Suyetin M, Schwaminger SP, Wenzel W, Berensmeier S. Buffer Influence on the Amino Acid Silica Interaction. Chemphyschem 2020; 21:2347-2356. [PMID: 32794279 PMCID: PMC7702087 DOI: 10.1002/cphc.202000572] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/04/2020] [Revised: 08/11/2020] [Indexed: 12/11/2022]
Abstract
Protein-surface interactions are exploited in various processes in life sciences and biotechnology. Many of such processes are performed in presence of a buffer system, which is generally believed to have an influence on the protein-surface interaction but is rarely investigated systematically. Combining experimental and theoretical methodologies, we herein demonstrate the strong influence of the buffer type on protein-surface interactions. Using state of the art chromatographic experiments, we measure the interaction between individual amino acids and silica, as a reference to understand protein-surface interactions. Among all the 20 proteinogenic amino acids studied, we found that arginine (R) and lysine (K) bind most strongly to silica, a finding validated by free energy calculations. We further measured the binding of R and K at different pH in presence of two different buffers, MOPS (3-(N-morpholino)propanesulfonic acid) and TRIS (tris(hydroxymethyl)aminomethane), and find dramatically different behavior. In presence of TRIS, the binding affinity of R/K increases with pH, whereas we observe an opposite trend for MOPS. These results can be understood using a multiscale modelling framework combining molecular dynamics simulation and Langmuir adsorption model. The modelling approach helps to optimize buffer conditions in various fields like biosensors, drug delivery or bio separation engineering prior to the experiment.
Collapse
Affiliation(s)
- Saientan Bag
- Institute of Nanotechnology (INT)Karlsruhe Institute of Technology (KIT)KarlsruheGermany
| | - Stefan Rauwolf
- Bioseparation Engineering GroupDepartment of Mechanical EngineeringTechnical University of Munich(TUM)GarchingGermany
| | - Mikhail Suyetin
- Institute of Nanotechnology (INT)Karlsruhe Institute of Technology (KIT)KarlsruheGermany
| | - Sebastian P. Schwaminger
- Bioseparation Engineering GroupDepartment of Mechanical EngineeringTechnical University of Munich(TUM)GarchingGermany
| | - Wolfgang Wenzel
- Institute of Nanotechnology (INT)Karlsruhe Institute of Technology (KIT)KarlsruheGermany
| | - Sonja Berensmeier
- Bioseparation Engineering GroupDepartment of Mechanical EngineeringTechnical University of Munich(TUM)GarchingGermany
| |
Collapse
|
32
|
Ostertag F, Schmidt CM, Berensmeier S, Hinrichs J. Development and validation of an RP-HPLC DAD method for the simultaneous quantification of minor and major whey proteins. Food Chem 2020; 342:128176. [PMID: 33046286 DOI: 10.1016/j.foodchem.2020.128176] [Citation(s) in RCA: 19] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/02/2020] [Revised: 09/21/2020] [Accepted: 09/21/2020] [Indexed: 12/11/2022]
Abstract
Whey represents a valuable protein source for human nutrition. Whey composition varies with respect to process characteristics during milk processing. For efficient exploitation of this dairy side stream, reliable analytical methods are essential. The aim of this study was to develop and validate an RP-HPLC-DAD method for the simultaneous quantification of the minor (lactoferrin, lactoperoxidase, bovine serum albumin) and major (α-lactalbumin, β-lactoglobulin) whey proteins. Seven RP-columns were compared and the composition of the mobile phase was optimized to achieve baseline separation. In validation experiments the limits of detection (LOD < 8 mg/L) and quantification (LOQ < 24 mg/L) were determined. Validity was proofed by precision (>96%), accuracy (95% - 103%) and recovery (96% - 102%) measurements. Peak homogeneity was confirmed by SDS-PAGE. The individual working ranges were adjusted to the estimated protein concentrations in whey, allowing direct analysis without sample preparation at a method runtime of 23 min.
Collapse
Affiliation(s)
- Fabian Ostertag
- University of Hohenheim, Institute of Food Science and Biotechnology, Department of Soft Matter Science and Dairy Technology, Garbenstrasse 21, 70599 Stuttgart, Germany.
| | - Christian M Schmidt
- University of Hohenheim, Institute of Food Science and Biotechnology, Department of Soft Matter Science and Dairy Technology, Garbenstrasse 21, 70599 Stuttgart, Germany
| | - Sonja Berensmeier
- Technical University of Munich, Department of Mechanical Engineering, Bioseparation Engineering Group, Germany
| | - Jörg Hinrichs
- University of Hohenheim, Institute of Food Science and Biotechnology, Department of Soft Matter Science and Dairy Technology, Garbenstrasse 21, 70599 Stuttgart, Germany
| |
Collapse
|
33
|
Hobmeier K, Goëss MC, Sehr C, Schwaminger S, Berensmeier S, Kremling A, Kunte HJ, Pflüger-Grau K, Marin-Sanguino A. Anaplerotic Pathways in Halomonas elongata: The Role of the Sodium Gradient. Front Microbiol 2020; 11:561800. [PMID: 33101236 PMCID: PMC7545133 DOI: 10.3389/fmicb.2020.561800] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/14/2020] [Accepted: 08/12/2020] [Indexed: 11/13/2022] Open
Abstract
Salt tolerance in the γ-proteobacterium Halomonas elongata is linked to its ability to produce the compatible solute ectoine. The metabolism of ectoine production is of great interest since it can shed light on the biochemical basis of halotolerance as well as pave the way for the improvement of the biotechnological production of such compatible solute. Ectoine belongs to the biosynthetic family of aspartate-derived amino-acids. Aspartate is formed from oxaloacetate, thereby connecting ectoine production to the anaplerotic reactions that refill carbon into the tricarboxylic acid cycle (TCA cycle). This places a high demand on these reactions and creates the need to regulate them not only in response to growth but also in response to extracellular salt concentration. In this work, we combine modeling and experiments to analyze how these different needs shape the anaplerotic reactions in H. elongata. First, the stoichiometric and thermodynamic factors that condition the flux distributions are analyzed, then the optimal patterns of operation for oxaloacetate production are calculated. Finally, the phenotype of two deletion mutants lacking potentially relevant anaplerotic enzymes: phosphoenolpyruvate carboxylase (Ppc) and oxaloacetate decarboxylase (Oad) are experimentally characterized. The results show that the anaplerotic reactions in H. elongata are indeed subject to evolutionary pressures that differ from those faced by other gram-negative bacteria. Ectoine producing halophiles must meet a higher metabolic demand for oxaloacetate and the reliance of many marine bacteria on the Entner-Doudoroff pathway compromises the anaplerotic efficiency of Ppc, which is usually one of the main enzymes fulfilling this role. The anaplerotic flux in H. elongata is contributed not only by Ppc but also by Oad, an enzyme that has not yet been shown to play this role in vivo. Ppc is necessary for H. elongata to grow normally at low salt concentrations but it is not required to achieve near maximal growth rates as long as there is a steep sodium gradient. On the other hand, the lack of Oad presents serious difficulties to grow at high salt concentrations. This points to a shared role of these two enzymes in guaranteeing the supply of oxaloacetate for biosynthetic reactions.
Collapse
Affiliation(s)
- Karina Hobmeier
- Professorship for Systems Biotechnology, Technical University of Munich, Munich, Germany
| | - Marie C. Goëss
- Professorship for Systems Biotechnology, Technical University of Munich, Munich, Germany
| | - Christiana Sehr
- Professorship for Systems Biotechnology, Technical University of Munich, Munich, Germany
| | - Sebastian Schwaminger
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Munich, Germany
| | - Sonja Berensmeier
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Munich, Germany
| | - Andreas Kremling
- Professorship for Systems Biotechnology, Technical University of Munich, Munich, Germany
| | - Hans Jörg Kunte
- Division of Biodeterioration and Reference Organisms, Bundesanstalt Für Materialforschung und -Prüfung (BAM), Berlin, Germany
| | - Katharina Pflüger-Grau
- Professorship for Systems Biotechnology, Technical University of Munich, Munich, Germany
| | - Alberto Marin-Sanguino
- Professorship for Systems Biotechnology, Technical University of Munich, Munich, Germany
| |
Collapse
|
34
|
Padwal P, Finger C, Fraga-García P, Kaveh-Baghbaderani Y, Schwaminger SP, Berensmeier S. Seeking Innovative Affinity Approaches: A Performance Comparison between Magnetic Nanoparticle Agglomerates and Chromatography Resins for Antibody Recovery. ACS Appl Mater Interfaces 2020; 12:39967-39978. [PMID: 32786242 DOI: 10.1021/acsami.0c05007] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Monoclonal antibodies are key molecules in medicine and pharmaceuticals. A potentially crucial drawback for faster advances in research here is their high price due to the extremely expensive antibody purification process, particularly the affinity capture step. Affinity chromatography materials have to demonstrate the high binding capacity and recovery efficiency as well as superior chemical and mechanical stability. Low-cost materials and robust, faster processes would reduce costs and enhance industrial immunoglobulin purification. Therefore, exploring the use of alternative materials is necessary. In this context, we conduct the first comparison of the performance of magnetic nanoparticles with commercially available chromatography resins and magnetic microparticles with regard to immobilizing Protein G ligands and recovering immunoglobulin G (IgG). Simultaneously, we demonstrate the suitability of bare as well as silica-coated and epoxy-functionalized magnetite nanoparticles for this purpose. All materials applied have a similar specific surface area but differ in the nature of their matrix and surface accessibility. The nanoparticles are present as micrometer agglomerates in solution. The highest Protein G density can be observed on the nanoparticles. IgG adsorbs as a multilayer on all materials investigated. However, the recovery of IgG after washing indicates a remaining monolayer, which points to the specificity of the IgG binding to the immobilized Protein G. One important finding is the impact of the ligand-binding stoichiometry (Protein G surface coverage) on IgG recovery, reusability, and the ability to withstand long-term sanitization. Differences in the materials' performances are attributed to mass transfer limitations and steric hindrance. These results demonstrate that nanoparticles represent a promising material for the economical and efficient immobilization of proteins and the affinity purification of antibodies, promoting innovation in downstream processing.
Collapse
Affiliation(s)
- Priyanka Padwal
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Garching 85748, Germany
| | - Constanze Finger
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Garching 85748, Germany
| | - Paula Fraga-García
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Garching 85748, Germany
| | - Yasmin Kaveh-Baghbaderani
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Garching 85748, Germany
| | - Sebastian P Schwaminger
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Garching 85748, Germany
| | - Sonja Berensmeier
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Garching 85748, Germany
| |
Collapse
|
35
|
Martin L, Wittmann L, Berensmeier S. Downstream process development for a small molecule from saline microbial fermentation. CHEM-ING-TECH 2020. [DOI: 10.1002/cite.202055376] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Affiliation(s)
- L. Martin
- Technical University of Munich Bioseparation Engineering Group Boltzmannstr. 15 85748 Garching Germany
| | - L. Wittmann
- Technical University of Munich Bioseparation Engineering Group Boltzmannstr. 15 85748 Garching Germany
| | - S. Berensmeier
- Technical University of Munich Bioseparation Engineering Group Boltzmannstr. 15 85748 Garching Germany
| |
Collapse
|
36
|
Trunzer T, Fraga-García P, Berensmeier S. Multidimensional process development for chromatographic separation of small molecules using electrical potential. CHEM-ING-TECH 2020. [DOI: 10.1002/cite.202055286] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Affiliation(s)
- T. Trunzer
- Technische Universität München Professur für Selektive Trenntechnik Boltzmannstr. 15 85748 Garching Germany
| | - P. Fraga-García
- Technische Universität München Professur für Selektive Trenntechnik Boltzmannstr. 15 85748 Garching Germany
| | - S. Berensmeier
- Technische Universität München Professur für Selektive Trenntechnik Boltzmannstr. 15 85748 Garching Germany
| |
Collapse
|
37
|
Schwaminger SP, Fraga-García P, Eigenfeld M, Becker TM, Berensmeier S. Magnetic Separation in Bioprocessing Beyond the Analytical Scale: From Biotechnology to the Food Industry. Front Bioeng Biotechnol 2019; 7:233. [PMID: 31612129 PMCID: PMC6776625 DOI: 10.3389/fbioe.2019.00233] [Citation(s) in RCA: 35] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/07/2019] [Accepted: 09/09/2019] [Indexed: 12/25/2022] Open
Abstract
Downstream processing needs more innovative ideas to advance and overcome current bioprocessing challenges. Chromatography is by far the most prevalent technique used by a conservative industrial sector. Chromatography has many advantages but also often represents the most expensive step in a pharmaceutical production process. Therefore, alternative methods as well as further processing strategies are urgently needed. One promising candidate for new developments on a large scale is magnetic separation, which enables the fast and direct capture of target molecules in fermentation broths. There has been a small revolution in this area in the last 10–20 years and a few papers dealing with the use of magnetic separation in bioprocessing examples beyond the analytical scale have been published. Since each target material is purified with a different magnetic separation approach, the comparison of processes is not trivial but would help to understand and improve magnetic separation and thus making it attractive for the technical scale. To address this issue, we report on the latest achievements in magnetic separation technology and offer an overview of the progress of the capture and separation of biomolecules derived from biotechnology and food technology. Magnetic separation has great potential for high-throughput downstream processing in applied life sciences. At the same time, two major challenges need to be overcome: (1) the development of a platform for suitable and flexible separation devices and (2) additional investigations of advantageous processing conditions, especially during recovery. Concentration and purification factors need to be improved to pave the way for the broader use of magnetic applications. The innovative combination of magnetic gradients and multipurpose separations will set new magnetic-based trends for large scale downstream processing.
Collapse
Affiliation(s)
- Sebastian P Schwaminger
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Garching, Germany
| | - Paula Fraga-García
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Garching, Germany
| | - Marco Eigenfeld
- Research Group Beverage and Cereal Biotechnology, Institute of Brewing and Beverage Technology, Technical University of Munich, Freising, Germany
| | - Thomas M Becker
- Research Group Beverage and Cereal Biotechnology, Institute of Brewing and Beverage Technology, Technical University of Munich, Freising, Germany
| | - Sonja Berensmeier
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Garching, Germany
| |
Collapse
|
38
|
Grozdev L, Kaiser J, Berensmeier S. One-Step Purification of Microbially Produced Hydrophobic Terpenes via Process Chromatography. Front Bioeng Biotechnol 2019; 7:185. [PMID: 31417900 PMCID: PMC6681792 DOI: 10.3389/fbioe.2019.00185] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/07/2019] [Accepted: 07/15/2019] [Indexed: 12/31/2022] Open
Abstract
Novel and existing terpenes are already being produced by genetically modified microorganisms, leading to new process challenges for the isolation and purification of these terpenes. Here, eight different chromatographic resins were characterized for the packed bed adsorption of the model terpene β-caryophyllene, showing their applicability on an Escherichia coli fermentation mixture. The polystyrenic Rensa® RP (Ø 50 μm) shows the highest affinity, with a maximum capacity of >100 g L−1 and the best efficiency, with a height equivalent of a theoretical plate (HETP) of 0.022 cm. With this material, an optimized adsorption-based purification of β-caryophyllene from a fermentation mixture was developed, with the green solvent ethanol for desorption. A final yield of >80% and a purity of >99% were reached after only one process step with a total productivity of 0.83 g h−1 L−1. The product solution was loaded with a volume ratio (feed to column) of >500 and the adapted gradient elution yielded a 40 times higher concentration of β-caryophyllene. The adsorption-based chromatography represents therefore a serious alternative to the liquid-liquid extraction and achieves desired purities without the utilization of hazardous solvents.
Collapse
Affiliation(s)
- Ljubomir Grozdev
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Garching, Germany
| | - Johann Kaiser
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Garching, Germany
| | - Sonja Berensmeier
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Garching, Germany
| |
Collapse
|
39
|
Schwaminger SP, Anand P, Borkowska-Panek M, Blank-Shim SA, Fraga-Garci A P, Fink K, Berensmeier S, Wenzel W. Rational Design of Iron Oxide Binding Peptide Tags. Langmuir 2019; 35:8472-8481. [PMID: 31198043 DOI: 10.1021/acs.langmuir.9b00729] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/09/2023]
Abstract
Owing to their extraordinary magnetic properties and low-cost production, iron oxide nanoparticles (IONs) are in the focus of research. In order to better understand interactions of IONs with biomolecules, a tool for the prediction of the propensity of different peptides to interact with IONs is of great value. We present an effective implicit surface model (EISM), which includes several interaction models. Electrostatic interactions, van der Waals interactions, and entropic effects are considered for the theoretical calculations. However, the most important parameter, a surface accessible area force field contribution term, derives directly from experimental results on the interactions of IONs and peptides. Data from binding experiments of ION agglomerates to different peptides immobilized on cellulose membranes have been used to parameterize the model. The work was carried out under defined environmental conditions; hence, effects because of changes, for example structure or solubility by changing the surroundings, are not included. EISM enables researchers to predict the binding of peptides to IONs, which we then verify with further peptide array experiments in an iterative optimization process also presented here. Negatively charged peptides were identified as best binders for IONs in Tris buffer. Furthermore, we investigated the constitution of peptides and how the amount and position of several amino acid side chains affect peptide-binding. The incorporation of glycine leads to higher binding scores compared to the incorporation of cysteine in negatively charged peptides.
Collapse
Affiliation(s)
- Sebastian Patrick Schwaminger
- Bioseparation Engineering Group, Department of Mechanical Engineering , Technical University of Munich , Boltzmannstra?e 15 , 85748 Garching , Germany
| | - Priya Anand
- Institute of Nanotechnology , Karlsruhe Institute of Technology , 76344 Eggenstein-Leopoldshafen , Germany
| | - Monika Borkowska-Panek
- Institute of Nanotechnology , Karlsruhe Institute of Technology , 76344 Eggenstein-Leopoldshafen , Germany
| | - Silvia Angela Blank-Shim
- Bioseparation Engineering Group, Department of Mechanical Engineering , Technical University of Munich , Boltzmannstra?e 15 , 85748 Garching , Germany
| | - Paula Fraga-Garci A
- Bioseparation Engineering Group, Department of Mechanical Engineering , Technical University of Munich , Boltzmannstra?e 15 , 85748 Garching , Germany
| | - Karin Fink
- Institute of Nanotechnology , Karlsruhe Institute of Technology , 76344 Eggenstein-Leopoldshafen , Germany
| | - Sonja Berensmeier
- Bioseparation Engineering Group, Department of Mechanical Engineering , Technical University of Munich , Boltzmannstra?e 15 , 85748 Garching , Germany
| | - Wolfgang Wenzel
- Institute of Nanotechnology , Karlsruhe Institute of Technology , 76344 Eggenstein-Leopoldshafen , Germany
| |
Collapse
|
40
|
Abstract
Magnetic metal oxide nanoparticles demonstrate great applicability in several fields such as biotechnology, medicine and catalysis. A stable, magnetic and low-cost material, nanoscale magnetite, is an interesting adsorbent for protein purification. Downstream processing can account for up to 80% of the total production costs in biotechnological production. As such, the development of new innovative separation methods can be regarded as highly profitable. While short peptide sequences can be used as specific affinity tags for functionalised adsorber surfaces, they need expensive affinity ligands on the particle surface for adsorption. In order to identify peptide tags for several non-functionalised inorganic surfaces, different binding conditions to iron oxide nanoparticles are evaluated. Therefore, magnetite nanoparticles in a range of 5-20 nm were synthesised with a co-precipitation method. Zeta potential measurements indicated an amphiphilic surface with an isoelectric point in the neutral pH region. Glutamic acid-based homo-peptides were used as affinity peptides for the magnetite nanoparticles. We demonstrate a dependence of the binding affinity of the peptides on pH and buffer ions in two different experimental set-ups. The nature of surface coordination for glutamic acid-based peptides can be demonstrated with different spectroscopic approaches such as infrared spectroscopy (IR), Raman spectroscopy and circular dichroism spectroscopy (CD). We want to emphasise the importance of physicochemical properties such as surface energy, polarity, morphology and charge. These parameters, which are dependent on the environmental conditions, play a crucial role in peptide interactions with iron oxide surfaces. The understanding of the adsorption of simple biomolecules on nanoscale metal oxide surfaces also represents the key to the even more complex interactions of proteins at the bio-nano interface. From the identification of interaction patterns and an understanding of the adsorption of these peptides, the up-scaling to tagged model proteins facilitates the possibility of an industrial magnetic separation process and might therefore reduce time and costs in purification processes.
Collapse
Affiliation(s)
- S P Schwaminger
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Boltzmannstraße 15, Garching, 85748, Germany.
| | | | | | | | | |
Collapse
|
41
|
Schwaminger SP, Fraga-García P, Blank-Shim SA, Straub T, Haslbeck M, Muraca F, Dawson KA, Berensmeier S. Magnetic One-Step Purification of His-Tagged Protein by Bare Iron Oxide Nanoparticles. ACS Omega 2019; 4:3790-3799. [PMID: 31459591 PMCID: PMC6648446 DOI: 10.1021/acsomega.8b03348] [Citation(s) in RCA: 32] [Impact Index Per Article: 6.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/30/2018] [Accepted: 01/04/2019] [Indexed: 05/21/2023]
Abstract
Magnetic separation is a promising alternative to conventional methods in downstream processing. This can facilitate easier handling, fewer processing steps, and more sustainable processes. Target materials can be extracted directly from crude cell lysates in a single step by magnetic nanoadsorbents with high-gradient magnetic fishing (HGMF). Additionally, the use of hazardous consumables for reducing downstream processing steps can be avoided. Here, we present proof of principle of one-step magnetic fishing from crude Escherichia coli cell lysate of a green fluorescent protein (GFP) with an attached hexahistidine (His6)-tag, which is used as the model target molecule. The focus of this investigation is the upscale to a liter scale magnetic fishing process in which a purity of 91% GFP can be achieved in a single purification step from cleared cell lysate. The binding through the His6-tag can be demonstrated, since no significant binding of nontagged GFP toward bare iron oxide nanoparticles (BIONs) can be observed. Nonfunctionalized BIONs with primary particle diameters of around 12 nm, as used in the process, can be produced with a simple and low-cost coprecipitation synthesis. Thus, HGMF with BIONs might pave the way for a new and greener era of downstream processing.
Collapse
Affiliation(s)
- Sebastian P. Schwaminger
- Bioseparation
Engineering Group, Department of Mechanical Engineering and Department of
Chemistry, Technical University of Munich, Garching 85748, Germany
- Centre
for BioNano Interactions, School of Chemistry and Chemical Biology
and Conway Institute for Biomolecular and Biomedical Research, University College Dublin, Belfield, Dublin D14 YH57, Ireland
| | - Paula Fraga-García
- Bioseparation
Engineering Group, Department of Mechanical Engineering and Department of
Chemistry, Technical University of Munich, Garching 85748, Germany
| | - Silvia A. Blank-Shim
- Bioseparation
Engineering Group, Department of Mechanical Engineering and Department of
Chemistry, Technical University of Munich, Garching 85748, Germany
| | - Tamara Straub
- Bioseparation
Engineering Group, Department of Mechanical Engineering and Department of
Chemistry, Technical University of Munich, Garching 85748, Germany
| | - Martin Haslbeck
- Bioseparation
Engineering Group, Department of Mechanical Engineering and Department of
Chemistry, Technical University of Munich, Garching 85748, Germany
| | - Francesco Muraca
- Centre
for BioNano Interactions, School of Chemistry and Chemical Biology
and Conway Institute for Biomolecular and Biomedical Research, University College Dublin, Belfield, Dublin D14 YH57, Ireland
| | - Kenneth A. Dawson
- Centre
for BioNano Interactions, School of Chemistry and Chemical Biology
and Conway Institute for Biomolecular and Biomedical Research, University College Dublin, Belfield, Dublin D14 YH57, Ireland
| | - Sonja Berensmeier
- Bioseparation
Engineering Group, Department of Mechanical Engineering and Department of
Chemistry, Technical University of Munich, Garching 85748, Germany
| |
Collapse
|
42
|
Schwaminger SP, Begovic B, Schick L, Jumani NA, Brammen MW, Fraga-García P, Berensmeier S. Potential-Controlled Tensiometry: A Tool for Understanding Wetting and Surface Properties of Conductive Powders by Electroimbibition. Anal Chem 2018; 90:14131-14136. [PMID: 30450897 DOI: 10.1021/acs.analchem.8b03475] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
Potential-controlled tensiometry is a voltage-induced method which enables measuring the contact angle between a powder bed and a liquid medium through the capillary rise method. This analytical tool provides a fine-grained technique for understanding wetting behavior of powders as well as solid surfaces in connection with the application of an electrical potential. In this work, the powder bed was brought into contact with an aluminum rod connected to a portable lightweight DAC-module (digital to analog converter) powered by a lithium-polymer battery (LiPo). The presented analytical device can be charged up to ±1000 mV. Both the power source and the DAC-module are lightweight in order to be conveniently attached to a force tensiometer without incorporating complex wiring. In this setup, we tested multiwall carbon nanotubes (MWCNT) and glassy carbon particles. An influence of the potential on the wetting behavior of glassy carbon particles is observed which demonstrates the working principle of the device. Surprisingly, no significant effect of the potential on the wetting behavior of MWCNT is indicated in the range studied. This technique can be a valuable tool to analyze the effect of changing surface properties applying electrical gradients on materials.
Collapse
Affiliation(s)
- Sebastian P Schwaminger
- Bioseparation Engineering Group, Department of Mechanical Engineering , Technical University of Munich , Boltzmannstraße 15 , Garching , 85748 , Germany
| | - Benedikt Begovic
- Bioseparation Engineering Group, Department of Mechanical Engineering , Technical University of Munich , Boltzmannstraße 15 , Garching , 85748 , Germany
| | - Lukas Schick
- Bioseparation Engineering Group, Department of Mechanical Engineering , Technical University of Munich , Boltzmannstraße 15 , Garching , 85748 , Germany
| | - N Aisyah Jumani
- Bioseparation Engineering Group, Department of Mechanical Engineering , Technical University of Munich , Boltzmannstraße 15 , Garching , 85748 , Germany.,Singapore Institute of Technology , 510 Dover Road , Singapore City , Singapore 138683
| | - Markus W Brammen
- Bioseparation Engineering Group, Department of Mechanical Engineering , Technical University of Munich , Boltzmannstraße 15 , Garching , 85748 , Germany
| | - Paula Fraga-García
- Bioseparation Engineering Group, Department of Mechanical Engineering , Technical University of Munich , Boltzmannstraße 15 , Garching , 85748 , Germany
| | - Sonja Berensmeier
- Bioseparation Engineering Group, Department of Mechanical Engineering , Technical University of Munich , Boltzmannstraße 15 , Garching , 85748 , Germany
| |
Collapse
|
43
|
Kaveh-Baghbaderani Y, Blank-Shim SA, Koch T, Berensmeier S. Selective release of overexpressed recombinant proteins from E. coli cells facilitates one-step chromatographic purification of peptide-tagged green fluorescent protein variants. Protein Expr Purif 2018; 152:155-160. [DOI: 10.1016/j.pep.2018.07.014] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/28/2018] [Revised: 07/25/2018] [Accepted: 07/27/2018] [Indexed: 11/28/2022]
|
44
|
Fraga-García P, Schwaminger S, Blank-Shim S, Brammen M, Berensmeier S. Magnetic Separation: Prospects for Downstream Processing. CHEM-ING-TECH 2018. [DOI: 10.1002/cite.201855180] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Affiliation(s)
- P. Fraga-García
- Technische Universität München; Professur für Selektive Trenntechnik; Boltzmannstraße 15 85748 Garching Germany
| | - S. Schwaminger
- Technische Universität München; Professur für Selektive Trenntechnik; Boltzmannstraße 15 85748 Garching Germany
| | - S. Blank-Shim
- Technische Universität München; Professur für Selektive Trenntechnik; Boltzmannstraße 15 85748 Garching Germany
| | - M. Brammen
- Technische Universität München; Professur für Selektive Trenntechnik; Boltzmannstraße 15 85748 Garching Germany
| | - S. Berensmeier
- Technische Universität München; Professur für Selektive Trenntechnik; Boltzmannstraße 15 85748 Garching Germany
| |
Collapse
|
45
|
Turrina T, Fraga-García P, Berensmeier S. Potentialkontrollierte Chromatographie - Eine Alternative zur salzabhängigen Ionenaustauschchromatographie. CHEM-ING-TECH 2018. [DOI: 10.1002/cite.201855294] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Affiliation(s)
- T. Turrina
- Technische Universität München; Professur für Selektive Trenntechnik; Boltzmannstraße 15 85748 Garching Deutschland
| | - P. Fraga-García
- Technische Universität München; Professur für Selektive Trenntechnik; Boltzmannstraße 15 85748 Garching Deutschland
| | - S. Berensmeier
- Technische Universität München; Professur für Selektive Trenntechnik; Boltzmannstraße 15 85748 Garching Deutschland
| |
Collapse
|
46
|
Schwaminger SP, Blank-Shim SA, Scheifele I, Pipich V, Fraga-García P, Berensmeier S. Design of Interactions Between Nanomaterials and Proteins: A Highly Affine Peptide Tag to Bare Iron Oxide Nanoparticles for Magnetic Protein Separation. Biotechnol J 2018; 14:e1800055. [DOI: 10.1002/biot.201800055] [Citation(s) in RCA: 35] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/22/2018] [Revised: 04/16/2018] [Indexed: 12/12/2022]
Affiliation(s)
- Sebastian P. Schwaminger
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich; 85748 Garching bei München Germany
| | - Silvia A. Blank-Shim
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich; 85748 Garching bei München Germany
| | - Isabell Scheifele
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich; 85748 Garching bei München Germany
| | - Vitaliy Pipich
- Jülich Centre for Neutron Science (JCNS) at Heinz Maier-Leibnitz Zentrum (MLZ), Forschungszentrum Jülich GmbH; 85748 Garching bei München Germany
| | - Paula Fraga-García
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich; 85748 Garching bei München Germany
| | - Sonja Berensmeier
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich; 85748 Garching bei München Germany
| |
Collapse
|
47
|
Fraga-García P, Kubbutat P, Brammen M, Schwaminger S, Berensmeier S. Bare Iron Oxide Nanoparticles for Magnetic Harvesting of Microalgae: From Interaction Behavior to Process Realization. Nanomaterials (Basel) 2018; 8:E292. [PMID: 29723963 PMCID: PMC5977306 DOI: 10.3390/nano8050292] [Citation(s) in RCA: 39] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/05/2018] [Revised: 04/18/2018] [Accepted: 04/27/2018] [Indexed: 12/27/2022]
Abstract
Microalgae continue to gain in importance as a bioresource, while their harvesting remains a major challenge at the moment. This study presents findings on microalgae separation using low-cost, easy-to-process bare iron oxide nanoparticles with the additional contribution of the upscaling demonstration of this simple, adhesion-based process. The high affinity of the cell wall for the inorganic surface enables harvesting efficiencies greater than 95% for Scenedesmus ovalternus and Chlorella vulgaris. Successful separation is possible in a broad range of environmental conditions and primarily depends on the nanoparticle-to-microalgae mass ratio, whereas the effect of pH and ionic strength are less significant when the mass ratio is chosen properly. The weakening of ionic concentration profiles at the interphase due to the successive addition of deionized water leads the microalgae to detach from the nanoparticles. The process works efficiently at the liter scale, enabling complete separation of the microalgae from their medium and the separate recovery of all materials (algae, salts, and nanoparticles). The current lack of profitable harvesting processes for microalgae demands innovative approaches to encourage further development. This application of magnetic nanoparticles is an example of the prospects that nanobiotechnology offers for biomass exploitation.
Collapse
Affiliation(s)
- Paula Fraga-García
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Boltzmannstr 15, 85748 Garching, Germany.
| | - Peter Kubbutat
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Boltzmannstr 15, 85748 Garching, Germany.
| | - Markus Brammen
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Boltzmannstr 15, 85748 Garching, Germany.
| | - Sebastian Schwaminger
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Boltzmannstr 15, 85748 Garching, Germany.
| | - Sonja Berensmeier
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, Boltzmannstr 15, 85748 Garching, Germany.
| |
Collapse
|
48
|
Janoschek L, Grozdev L, Berensmeier S. Membrane-assisted extraction of monoterpenes: from in silico solvent screening towards biotechnological process application. R Soc Open Sci 2018; 5:172004. [PMID: 29765654 PMCID: PMC5936919 DOI: 10.1098/rsos.172004] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/03/2017] [Accepted: 03/13/2018] [Indexed: 06/08/2023]
Abstract
This work focuses on the process development of membrane-assisted solvent extraction of hydrophobic compounds such as monoterpenes. Beginning with the choice of suitable solvents, quantum chemical calculations with the simulation tool COSMO-RS were carried out to predict the partition coefficient (logP) of (S)-(+)-carvone and terpinen-4-ol in various solvent-water systems and validated afterwards with experimental data. COSMO-RS results show good prediction accuracy for non-polar solvents such as n-hexane, ethyl acetate and n-heptane even in the presence of salts and glycerol in an aqueous medium. Based on the high logP value, n-heptane was chosen for the extraction of (S)-(+)-carvone in a lab-scale hollow-fibre membrane contactor. Two operation modes are investigated where experimental and theoretical mass transfer values, based on their related partition coefficients, were compared. In addition, the process is evaluated in terms of extraction efficiency and overall product recovery, and its biotechnological application potential is discussed. Our work demonstrates that the combination of in silico prediction by COSMO-RS with membrane-assisted extraction is a promising approach for the recovery of hydrophobic compounds from aqueous solutions.
Collapse
|
49
|
Schwaminger S, Blank‐Shim SA, Borkowska‐Panek M, Anand P, Fraga‐García P, Fink K, Wenzel W, Berensmeier S. Experimental characterization and simulation of amino acid and peptide interactions with inorganic materials. Eng Life Sci 2018; 18:84-100. [PMID: 32624891 PMCID: PMC6999452 DOI: 10.1002/elsc.201700019] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/02/2017] [Revised: 06/02/2017] [Accepted: 07/03/2017] [Indexed: 02/06/2023] Open
Abstract
Inspired by nature, many applications and new materials benefit from the interplay of inorganic materials and biomolecules. A fundamental understanding of complex organic-inorganic interactions would improve the controlled production of nanomaterials and biosensors to the development of biocompatible implants for the human body. Although widely exploited in applications, the interaction of amino acids and peptides with most inorganic surfaces is not fully understood. To date, precisely characterizing complex surfaces of inorganic materials and analyzing surface-biomolecule interactions remain challenging both experimentally and computationally. This article reviews several approaches to characterizing biomolecule-surface interactions and illustrates the advantages and disadvantages of the methods presented. First, we explain how the adsorption mechanism of amino acids/peptides to inorganic surfaces can be determined and how thermodynamic and kinetic process constants can be obtained. Second, we demonstrate how this data can be used to develop models for peptide-surface interactions. The understanding and simulation of such interactions constitute a basis for developing molecules with high affinity binding domains in proteins for bioprocess engineering and future biomedical technologies.
Collapse
Affiliation(s)
| | | | | | - Priya Anand
- Institute of NanotechnologyKarlsruhe Institute of TechnologyKarlsruheGermany
| | - Paula Fraga‐García
- Bioseparation Engineering GroupTechnical University of MunichMünchenGermany
| | - Karin Fink
- Institute of NanotechnologyKarlsruhe Institute of TechnologyKarlsruheGermany
| | - Wolfgang Wenzel
- Institute of NanotechnologyKarlsruhe Institute of TechnologyKarlsruheGermany
| | - Sonja Berensmeier
- Bioseparation Engineering GroupTechnical University of MunichMünchenGermany
| |
Collapse
|
50
|
Blank-Shim SA, Schwaminger SP, Borkowska-Panek M, Anand P, Yamin P, Fraga-García P, Fink K, Wenzel W, Berensmeier S. Binding patterns of homo-peptides on bare magnetic nanoparticles: insights into environmental dependence. Sci Rep 2017; 7:14047. [PMID: 29070786 PMCID: PMC5656586 DOI: 10.1038/s41598-017-13928-6] [Citation(s) in RCA: 20] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/23/2017] [Accepted: 10/04/2017] [Indexed: 12/30/2022] Open
Abstract
Magnetic nanoparticles (MNP) are intensively investigated for applications in nanomedicine, catalysis and biotechnology, where their interaction with peptides and proteins plays an important role. However, the characterisation of the interaction of individual amino acids with MNP remains challenging. Here, we classify the affinity of 20 amino acid homo-hexamers to unmodified iron oxide nanoparticles using peptide arrays in a variety of conditions as a basis to identify and rationally design selectively binding peptides. The choice of buffer system is shown to strongly influence the availability of peptide binding sites on the MNP surface. We find that under certain buffer conditions peptides of different charges can bind the MNP and that the relative strength of the interactions can be modulated by changing the buffer. We further present a model for the competition between the buffer and the MNP's electrostatically binding to the adsorption sites. Thereby, we demonstrate that the charge distribution on the surface can be used to correlate the binding of positively and negatively charged peptides to the MNP. This analysis enables us to engineer the binding of MNP on peptides and contribute to better understand the bio-nano interactions, a step towards the design of affinity tags for advanced biomaterials.
Collapse
Affiliation(s)
- Silvia A Blank-Shim
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, 85748, Garching b. München, Germany
| | - Sebastian P Schwaminger
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, 85748, Garching b. München, Germany
| | - Monika Borkowska-Panek
- Institute of Nanotechnology, Karlsruhe Institute of Technology, 76344, Eggenstein-Leopoldshafen, Germany
| | - Priya Anand
- Institute of Nanotechnology, Karlsruhe Institute of Technology, 76344, Eggenstein-Leopoldshafen, Germany
| | - Peyman Yamin
- Institute of Nanotechnology, Karlsruhe Institute of Technology, 76344, Eggenstein-Leopoldshafen, Germany
| | - Paula Fraga-García
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, 85748, Garching b. München, Germany
| | - Karin Fink
- Institute of Nanotechnology, Karlsruhe Institute of Technology, 76344, Eggenstein-Leopoldshafen, Germany
| | - Wolfgang Wenzel
- Institute of Nanotechnology, Karlsruhe Institute of Technology, 76344, Eggenstein-Leopoldshafen, Germany.
| | - Sonja Berensmeier
- Bioseparation Engineering Group, Department of Mechanical Engineering, Technical University of Munich, 85748, Garching b. München, Germany.
| |
Collapse
|