Hybrid Nanoparticle/DNAzyme Electrochemical Biosensor for the Detection of Divalent Heavy Metal Ions and Cr3

A hybrid noble nanoparticle/DNAzyme electrochemical biosensor is proposed for the detection of Pb2+, Cd2+, and Cr3+. The sensor takes advantage of a well-studied material that is known for its selective interaction with heavy metal ions (i.e., DNAzymes), which is combined with metallic nanoparticles. The double-helix structure of DNAzymes is known to dissociate into smaller fragments in the presence of specific heavy metal ions; this results in a measurable change in device resistance due to the collapse of conductive inter-nanoparticle DNAzyme bridging. The paper discusses the effect of DNAzyme anchoring groups (i.e., thiol and amino functionalization groups) on device performance and reports on the successful detection of all three target ions in concentrations that are well below their maximum permitted levels in tap water. While the use of DNAzymes for the detection of lead in particular and, to some extent, cadmium has been studied extensively, this is one of the few reports on the successful detection of chromium (III) via a sensor incorporating DNAzymes. The sensor showed great potential for its future integration in autonomous and remote sensing systems due to its low power characteristics, simple and cost-effective fabrication, and easy automation and measurement.

Optimization of the hydrogen response characteristics of halogen-doped SnO2

The increasing demand for efficient sensing devices with facile low-cost fabrication has attracted a lot of scientific research effort in the recent years. In particular, the scientific community aims to develop new candidate materials suitable for energy-related devices, such as sensors and photovoltaics or clean energy applications such as hydrogen production. One of the most prominent methods to improve materials functionality and performance is doping key device component(s). This paper aims to examine in detail, both from a theoretical and an experimental point of view, the effect of halogen doping on the properties of tin dioxide (SnO₂) and provide a deeper understanding on the atomic scale mechanisms with respect to their potential applications in sensors. Density Functional Theory (DFT) calculations are used to examine the defect processes, the electronic structure and the thermodynamical properties of halogen-doped SnO₂. Calculations show that halogen doping reduces the oxide bandgap by creating gap states which agree well with our experimental data. The crystallinity and morphology of the samples is also altered. The synergy of these effects results in a significant improvement of the gas-sensing response. This work demonstrates for the first time a complete theoretical and experimental characterization of halogen-doped SnO₂ and investigates the possible responsible mechanisms. Our results illustrate that halogen doping is a low-cost method that significantly enhances the room temperature response of SnO₂.

Controlling Solar Hydrogen Production by Organizing Porphyrins

In this study, a highly efficient photocatalytic H₂ production system is developed by employing porphyrins as photocatalysts. Palladium and platinum tetracarboxyporphyrins (PdTCP and PtTCP) are adsorbed or coadsorbed onto TiO₂ nanoparticles (NPs), which act as the electron transport medium and as a scaffold that promotes the self-organization of the porphyrinoids. The self-organization of PdTCP and PtTCP, forming H- and J-aggregates, respectively, is the key element for H₂ evolution, as in the absence of TiO₂ NPs no catalytic activity is detected. Notably, J-aggregated PtTCPs are more efficient for H₂ production than H-aggregated PdTCPs. In this approach, a single porphyrin, which self-organizes onto TiO₂ NPs, acts as the light harvester and simultaneously as the catalyst, whereas TiO₂ serves as the electron transport medium. Importantly, the concurrent adsorption of PdTCP and PtTCP onto TiO₂ NPs results in the most efficient catalytic system, giving a turnover number of 22,733 and 30.2 mmol(H₂ ) g(cat)^-1 .

Patterned carbon dot-based thin films for solid-state devices

Carbon dot-based fluorescent nanocomposite compounds were obtained following microwave assisted thermal treatment of an aqueous mixture consisting of citric acid and urea. Thin film deposition of nanocomposites on SiO2 (100) substrates is followed by annealing, in order to render the films dissolution-resistant and processable. Optical lithography and O2 plasma etching are utilized to pattern the deposited films in the desired shapes and dimensions and a solid-state relative humidity sensor is fabricated on the SiO2 substrate. Spectroscopy and microscopy techniques are employed to characterize and monitor the whole process throughout the fabrication steps. The patterned films retain the functional groups introduced during their synthesis and continue to display hydrophilicity and PL properties. Successful patterning of these nanocomposites opens the way for the fabrication of solid-state, carbon dot-based optical and electrical devices that take advantage of the properties of carbon quantum dots.

Suppressing the Photocatalytic Activity of Zinc Oxide Electron-Transport Layer in Nonfullerene Organic Solar Cells with a Pyrene-Bodipy Interlayer

Organic solar cells based on nonfullerene acceptors have recently witnessed a significant rise in their power conversion efficiency values. However, they still suffer from severe instability issues, especially in an inverted device architecture based on the zinc oxide bottom electron transport layers. In this work, we insert a pyrene-bodipy donor-acceptor dye as a thin interlayer at the photoactive layer/zinc oxide interface to suppress the degradation reaction of the nonfullerene acceptor caused by the photocatalytic activity of zinc oxide. In particular, the pyrene-bodipy-based interlayer inhibits the direct contact between the nonfullerene acceptor and zinc oxide hence preventing the decomposition of the former by zinc oxide under illumination with UV light. As a result, the device photostability was significantly improved. The π-π interaction between the nonfullerene acceptor and the bodipy part of the interlayer facilitates charge transfer from the nonfullerene acceptor toward pyrene, which is followed by intramolecular charge transfer to bodipy part and then to zinc oxide. The bodipy-pyrene modified zinc oxide also increased the degree of crystallization of the photoactive blend and the face-on stacking of the polymer donor molecules within the blend hence contributing to both enhanced charge transport and increased absorption of the incident light. Furthermore, it decreased the surface work function as well as surface energy of the zinc oxide film all impacting in improved power conversion efficiency values of the fabricated cells with champion devices reaching values up to 9.86 and 11.80% for the fullerene and nonfullerene-based devices, respectively.

Enhanced Organic and Perovskite Solar Cell Performance through Modification of the Electron-Selective Contact with a Bodipy-Porphyrin Dyad

Photovoltaic devices based on organic semiconductors and organo-metal halide perovskites have not yet reached the theoretically predicted power conversion efficiencies while they still exhibit poor environmental stability. Interfacial engineering using suitable materials has been recognized as an attractive approach to tackle the above issues. We introduce here a zinc porphyrin-triazine-bodipy donor-π bridge-acceptor dye as a universal electron transfer mediator in both organic and perovskite solar cells. Thanks to its "push-pull" character, this dye enhances electron transfer from the absorber layer toward the electron-selective contact, thus improving the device's photocurrent and efficiency. The direct result is more than 10% average power conversion efficiency enhancement in both fullerene-based (from 8.65 to 9.80%) and non-fullerene-based (from 7.71 to 8.73%) organic solar cells as well as in perovskite ones (from 14.56 to 15.67%), proving the universality of our approach. Concurrently, by forming a hydrophobic network on the surface of metal oxide substrates, it improves the nanomorphology of the photoactive overlayer and contributes to efficiency stabilization. The fabricated devices of both kinds preserved more than 85% of their efficiency upon exposure to ambient conditions for more than 600 h without any encapsulation.

Surface defect engineering of mesoporous Cu/ZnS nanocrystal-linked networks for improved visible-light photocatalytic hydrogen production

Cu-doped ZnS nanocrystal-linked mesoporous frameworks possessing suitable electronic energy levels, strong visible-light absorption and large porosity with a low defective surface show efficient photocatalytic H₂ evolution activity from water splitting.

Synthesis and characterization of CoOx/BiVO4 photocatalysts for the degradation of propyl paraben

Cobalt-promoted bismuth vanadate photocatalysts of variable cobalt content (0-1.0 wt.%) were synthesized and characterized with various techniques including BET, XRD, DRS, XPS and TEM. BiVO₄ exists in the monoclinic scheelite structure, while cobalt addition improves the absorbance in the visible region although it does not affect the band gap energy of BiVO₄. Cobalt exists in the form of well-dispersed Co₃O₄ nanocrystallites, which are in intimate contact with the much larger BiVO₄ nanoparticles. Photocatalytic activity was evaluated for the degradation of propyl paraben (PP) under simulated solar radiation. The activity of pristine BiVO₄ is significantly improved adding small amounts of cobalt and is maximized for the catalyst containing 0.5 wt.% Co. PP degradation in ultrapure pure water increases with increasing photocatalyst loading (100 mg/L to 1.5 g/L), and decreasing PP concentration (1600-200 μg/L). Experiments in bottled water, as well as in pure water spiked with bicarbonate and chloride ions showed little effect of non-target inorganics on degradation. Conversely, degradation is severely impeded in secondary treated wastewater. The enhancement of the photocatalytic activity of the synthesized catalysts is attributed to efficient electron-hole separation, achieved at the p-n junction formed between the p-type Co₃O₄ and the n-type BiVO₄ semiconductors.

Inverted Perovskite Photovoltaics Using Flame Spray Pyrolysis Solution Based CuAlO2/Cu-O Hole-Selective Contact

We present the functionalization process of a conductive and transparent CuAlO₂/Cu-O hole-transporting layer (HTL). The CuAlO₂/Cu-O powders were developed by flame spray pyrolysis and their stabilized dispersions were treated by sonication and centrifugation methods. We show that when the supernatant part of the treated CuAlO₂/Cu-O dispersions is used for the development of CuAlO₂/Cu-O HTLs the corresponding inverted perovskite-based solar cells show improved functionality and power conversion efficiency of up to 16.3% with negligible hysteresis effect.

Boosting photochemical activity by Ni doping of mesoporous CoO nanoparticle assemblies

Mesoporous Ni-implanted CoO nanoparticle assemblies possessing a suitable electronic structure and large mesoporosity deliver highly efficient photocatalytic Cr(vi) reduction and water oxidation activity.

Multi-electron reduction of Wells-Dawson polyoxometalate films onto metallic, semiconducting and dielectric substrates

The investigation of conditions allowing multi-electron reduction and reoxidation of polyoxometalate (POM) films onto solid substrates is considered an issue of critical importance for their successful incorporation in electronic devices, different types of sensors and catalytic systems. In the present paper, the rich multi-electron redox chemistry of films of Wells-Dawson ammonium salts, namely (NH4)6P2Mo18O62 and (NH4)6P2W18O62, on top of metallic (Al), semiconducting (ITO) and dielectric (SiO2) substrates under ambient conditions is investigated. The respective Keggin heteropolyacids, H3PMo12O40 and H3PW12O40, are also investigated for comparison. On Al substrates, the Wells-Dawson ammonium salts are found to be significantly more reduced (4-6e-) compared to the respective Keggin heteropolyacids (∼2e-), in accordance with their deeper lying lowest unoccupied molecular orbital (LUMO) level. Subsequent thermal treatment in air results in reoxidation of the initially highly reduced POM films. Similar behavior is found on ITO substrates, but in initially less reduced (2-4e-) Wells-Dawson POM films. On the other hand, on SiO2 substrates, the thermal reduction of (NH4)6P2Mo18O62 film is observed and attributed to the thermal oxidation of ammonium counterions by [P2Mo18O62]6- anions. Overall, the multi-electron reduction of Wells-Dawson ammonium salts onto metallic and semiconducting substrates (Al, ITO) is determined by the relative position of the LUMO level of POMs in relation to the Fermi level of the substrate (i.e. substrate work function) and affected in a synergistic way by the presence of ammonium counterions. In contrast, on dielectric substrates (SiO2) the reduction of Wells-Dawson POMs ((NH4)6P2Mo18O62) is attributed only to the oxidation of ammonium counterions.

Atomic layer deposited Al2O3 thin films as humidity barrier coatings for nanoparticle-based strain sensors

Al₂O₃ thin films deposited by atomic layer deposition on Pt nanoparticle-based strain sensors were studied as humidity barrier coatings for sensor protection. The effect of two deposition parameters-film thickness and growth temperature-is discussed in relation to an Al₂O₃ coating's ability to isolate the nanoparticle surface and protect strain sensitivity from humidity variations. It is shown that transmission electron microscopy images cannot confirm the effective protection of a nanoparticle surface, thus x-ray photoelectron spectroscopy and electrical measurements have been employed. The existence of a critical thickness of the Al₂O₃ protective film above which resistance and gauge factor variations are suppressed during humidity change was observed at different deposition temperatures. This ability is linked with the existence of incorporated pinholes and intrinsic hydroxyl groups in the Al₂O₃ thin film, which are responsible for humidity transport through the oxide.

Size-dependent single electron transfer and semi-metal-to-insulator transitions in molecular metal oxide electronics

All-inorganic self-arranged molecular transition metal oxide hyperstructures based on polyoxometalate molecules (POMs) are fabricated and tested as electronically tunable components in emerging electronic devices. POM hyperstructures reveal great potential as charging nodes of tunable charging level for molecular memories and as enhancers of interfacial electron/hole injection for photovoltaic stacks. STM, UPS, UV-vis spectroscopy and AFM measurements show that this functionality stems from the films' ability to structurally tune their HOMO-LUMO levels and electron localization length at room temperature. By adapting POM nanocluster size in solution, self-doping and current modulation of four orders of magnitude is monitored on a single nanocluster on SiO₂ at voltages as low as 3 Volt. Structurally driven insulator-to-semi-metal transitions and size-dependent current regulation through single electron tunneling are demonstrated and examined with respect to the stereochemical and electronic structure of the molecular entities. This extends the value of self-assembly as a tool for correlation length and electronic properties tuning and demonstrate POM hyperstructures' plausibility for on-chip molecular electronics operative at room temperature.

Engineering of Porphyrin Molecules for Use as Effective Cathode Interfacial Modifiers in Organic Solar Cells of Enhanced Efficiency and Stability

In the present work, we effectively modify the TiO₂ electron transport layer of organic solar cells with an inverted architecture using appropriately engineered porphyrin molecules. The results show that the optimized porphyrin modifier bearing two carboxylic acids as the anchoring groups and a triazine electron-withdrawing spacer significantly reduces the work function of TiO₂, thereby reducing the electron extraction barrier. Moreover, the lower surface energy of the porphyrin-modified substrate results in better physical compatibility between the latter and the photoactive blend. Upon employing porphyrin-modified TiO₂ electron transport layers in PTB7:PC₇₁BM-based organic solar cells we obtained an improved average power conversion efficiency up to 8.73%. Importantly, porphyrin modification significantly increased the lifetime of the devices, which retained 80% of their initial efficiency after 500 h of storage in the dark. Because of its simplicity and efficacy, this approach should give tantalizing glimpses and generate an impact into the potential of porphyrins to facilitate electron transfer in organic solar cells and related devices.

Role of the Metal-Oxide Work Function on Photocurrent Generation in Hybrid Solar Cells

ZnO is a widely used metal-oxide semiconductor for photovoltaic application. In solar cell heterostructures they not only serve as a charge selective contact, but also act as electron acceptor. Although ZnO offers a suitable interface for exciton dissociation, charge separation efficiencies have stayed rather poor and conceptual differences to organic acceptors are rarely investigated. In this work, we employ Sn doping to ZnO nanowires in order to understand the role of defect and surface states in the charge separation process. Upon doping we are able to modify the metal-oxide work function and we show its direct correlation with the charge separation efficiency. For this purpose, we use the polymer poly(3-hexylthiophene) as donor and the squaraine dye SQ2 as interlayer. Interestingly, neither mobilities nor defects are prime performance limiting factor, but rather the density of available states around the conduction band is of crucial importance for hybrid interfaces. This work highlights crucial aspects to improve the charge generation process of metal-oxide based solar cells and reveals new strategies to improve the power conversion efficiency of hybrid solar cells.

Low Work Function Lacunary Polyoxometalates as Electron Transport Interlayers for Inverted Polymer Solar Cells of Improved Efficiency and Stability

Effective interface engineering has been shown to play a vital role in facilitating efficient charge-carrier transport, thus boosting the performance of organic photovoltaic devices. Herein, we employ water-soluble lacunary polyoxometalates (POMs) as multifunctional interlayers between the titanium dioxide (TiO₂) electron extraction/transport layer and the organic photoactive film to simultaneously enhance the efficiency, lifetime, and photostability of polymer solar cells (PSCs). A significant reduction in the work function (W_F) of TiO₂ upon POM utilization was observed, with the magnitude being controlled by the negative charge of the anion and the selection of the addenda atom (W or Mo). By inserting a POM interlayer with ∼10 nm thickness into the device structure, a significant improvement in the power conversion efficiency was obtained; the optimized POM-modified poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl][3-fluoro-2-[(2- 33 ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl]]:[6,6]-phenyl-C₇₀ butyric acid methyl ester (PTB7:PC₇₀BM)-based PSCs exhibited an efficiency of 8.07%, which represents a 21% efficiency enhancement compared to the reference TiO₂ cell. Similar results were obtained in POM-modified devices based on poly(3-hexylthiophene) (P3HT) with electron acceptors of different energy levels, such as PC₇₀BM or indene-C₆₀ bisadduct (IC₆₀BA), which enhanced their efficiency up to 4.34 and 6.21%, respectively, when using POM interlayers; this represents a 25-33% improvement as compared to the reference cells. Moreover, increased lifetime under ambient air and improved photostability under constant illumination were observed in POM-modified devices. Detailed analysis shows that the improvements in efficiency and stability synergistically stem from the reduced work function of TiO₂ upon POM coverage, the improved nanomorphology of the photoactive blend, the reduced interfacial recombination losses, the superior electron transfer, and the more effective exciton dissociation at the photoactive layer/POM/TiO₂ interfaces.

Intrinsic Defects and H Doping in WO3

WO₃ is widely used as industrial catalyst. Intrinsic and/or extrinsic defects can tune the electronic properties and extend applications to gas sensors and optoelectonics. However, H doping is a challenge to WO₃, the relevant mechanisms being hardly understood. In this context, we investigate intrinsic defects and H doping by density functional theory and experiments. Formation energies are calculated to determine the lowest energy defect states. O vacancies turn out to be stable in O-poor environment, in agreement with X-ray photoelectron spectroscopy, and O-H bond formation of H interstitial defects is predicted and confirmed by Fourier transform infrared spectroscopy.

Low-Dimensional Polyoxometalate Molecules/Tantalum Oxide Hybrids for Non-Volatile Capacitive Memories

Transition-metal-oxide hybrids composed of high surface-to-volume ratio Ta2O5 matrices and a molecular analogue of transition metal oxides, tungsten polyoxometalates ([PW12O40](3-)), are introduced herein as a charge storage medium in molecular nonvolatile capacitive memory cells. The polyoxometalate molecules are electrostatically self-assembled on a low-dimensional Ta2O5 matrix, functionalized with an aminosilane molecule with primary amines as the anchoring moiety. The charge trapping sites are located onto the metal framework of the electron-accepting molecular entities as well as on the molecule/oxide interfaces which can immobilize negatively charged mobile oxygen vacancies. The memory characteristics of this novel nanocomposite were tested using no blocking oxide for extraction of structure-specific characteristics. The film was formed on top of the 3.1 nm-thick SiO2/n-Si(001) substrates and has been found to serve as both SiO2/Si interface states' reducer (i.e., quality enhancer) and electron storage medium. The device with the polyoxometalates sandwiched between two Ta2O5 films results in enhanced internal scattering of carriers. Thanks to this, it exhibits a significantly larger memory window than the one containing the plain hybrid and comparable retention time, resulting in a memory window of 4.0 V for the write state and a retention time around 10(4) s without blocking medium. Differential distance of molecular trapping centers from the cell's gate and electronic coupling to the space charge region of the underlying Si substrate were identified as critical parameters for enhanced electron trapping for the first time in such devices. Implementing a numerical electrostatic model incorporating structural and electronic characteristics of the molecular nodes derived from scanning probe and spectroscopic characterization, we are able to interpret the hybrid's electrical response and gain some insight into the electrostatics of the trapping medium.

Surface Modification of ZnO Layers via Hydrogen Plasma Treatment for Efficient Inverted Polymer Solar Cells

Modifications of the ZnO electron extraction layer with low-pressure H plasma treatment increased the efficiency of inverted polymer solar cells (PSCs) based on four different photoactive blends, namely, poly(3-hexylthiophene):[6,6]-phenyl C71 butyric acid methyl ester (P3HT:PC71BM), P3HT:1',1″,4',4″-tetrahydro-di[1,4]methanonaphthaleno-[5,6]ullerene-C60 (P3HT:IC60BA), poly[(9-(1-octylnonyl)-9H-carbazole-2,7-diyl)-2,5-thiophenediyl-2,1,3-benzothiadiazole-4,7-diyl-2,5-thiophenediyl]:PC71BM (PCDTBT:PC71BM), and (poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl][3-fluoro-2-(2-ethylhexy)carbonyl]thieno[3,4-b]thiophenediyl]]):PC71BM (PTB7:PC71BM), irrespective of the donor:acceptor combination in the photoactive blend. The drastic improvement in device efficiency is dominantly attributable to the reduction in the work function of ZnO followed by a decreased energy barrier for electron extraction from fullerene acceptor. In addition, reduced recombination losses and improved nanomorphology of the photoactive blend in the devices with the H plasma treated ZnO layer were observed, whereas exciton dissociation also improved with hydrogen treatment. As a result, the inverted PSC consisting of the P3HT:PC71BM blend exhibited a high power conversion efficiency (PCE) of 4.4%, the one consisting of the P3HT:IC60BA blend exhibited a PCE of 6.6%, and our champion devices with the PCDTBT:PC71BM and PTB7:PC71BM blends reached high PCEs of 7.4 and 8.0%, respectively.

All-organic sulfonium salts acting as efficient solution processed electron injection layer for PLEDs

Herein we introduce the all-organic triphenylsulfonium (TPS) salts cathode interfacial layers (CILs), deposited from their methanolic solution, as a new simple strategy for circumventing the use of unstable low work function metals and obtaining charge balance and high electroluminescence efficiency in polymer light-emitting diodes (PLEDs). In particular, we show that the incorporation of TPS-triflate or TPS-nonaflate at the polymer/Al interface improved substantially the luminous efficiency of the device (from 2.4 to 7.9 cd/A) and reduced the turn-on and operating voltage, whereas an up to 4-fold increase in brightness (∼11 250 cd/m(2) for TPS-triflate and ∼14 682 cd/m(2) for TPS-nonaflate compared to ∼3221 cd/m(2) for the reference device) was observed in poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(1,4-benzo-2,1',3-thiadiazole)] (F8BT)-based PLEDs. This was mainly attributed to the favorable decrease of the electron injection barrier, as derived from the open-circuit voltage (Voc) measurements, which was also assisted by the conduction of electrons through the triphenylsulfonium salt sites. Density functional theory calculations indicated that the total energy of the anionic (reduced) form of the salt, that is, upon placing an electron to its lowest unoccupied molecular orbital, is lower than its neutral state, rendering the TPS-salts stable upon electron transfer in the solid state. Finally, the morphology optimization of the TPS-salt interlayer through controlling the processing parameters was found to be critical for achieving efficient electron injection and transport at the respective interfaces.

Molecular composition and orientation of interstitial versus surface silicon oxides for Si(111)/SiO2 and Si(100)/SiO2 interfaces using FT-IR and X-ray photoelectron spectroscopies

This work represents a characterization study of silicon oxide on Si(111) and Si(100) surfaces intended for use as substrates in organic light-emitting diodes (OLEDs) on chip devices. Samples have been prepared using either native oxide formation or thermal oxidation, and they have also been treated for activation of hydroxyl groups on their surface. Both Fourier transform infrared (FT-IR) and X-ray photoelectron spectroscopy (XPS) have been used in order to understand the molecular orientation as well as the chemical composition of the various oxide types formed during these different oxidation processes. These spectroscopic studies reveal the formation of two different types of oxides on these substrates. The first type is a thin oxide layer on the surface, whereas the second type, called interstitial, is found deeper in the substrate. Specifically, it was found that the Si(100) substrate forms a randomly oriented interstitial oxide, whereas the presence of a lower quantity but more oriented interstitial oxide was found for the Si(111) substrate. In addition, we report for the first time the position of the impurity oxygen for Si(111) substrates at 1122 cm(-1). Finally, in both Si(100) and Si(111) substrates, the thin (<15 A) silicon oxide layers are oriented and appear to contain silicon atoms of similar oxidation states. In contrast, both the thicker surface film (100 A) as well as the interstitial oxide produced by the thermal oxidation procedure show random orientation and relative uniformity. Overall these orientation studies clearly show that the formation process of surface oxides in different substrates clearly creates species that are oriented differently with respect to the surface.