Potential environmental impact of mycelium composites on African communities

The ecological and economic benefits of mycelium composites offer a promising opportunity for supporting sustainable development in Africa. This study focuses on assessing the environmental impact of mycelium composites for building and construction (MCBs) by conducting a life cycle assessment (LCA) in the context of Africa. It is demonstrated that the potential environmental impact of MCBs is substantially influenced by the use and source of electrical power for autoclaves, incubators, and ovens, making the culturing and post-processing phases the major environmental hotspots. The impact of MCB production is also relative to the energy mix of specific countries, being higher in countries that rely on fossil fuel energy (e.g., South Africa) and lower in those that rely more on renewable sources (e.g., Democratic Republic of the Congo, DRC). Furthermore, the impact of MCB production is found to be sensitive to travel distance, suggesting that situating production facilities closer to agricultural, agro-industrial, and/or forestry waste sources could be more beneficial than interregional sourcing, for example. It is also demonstrated that MCBs have the potential to be a more ecologically sustainable alternative to some conventional construction materials (e.g., concrete) over an entire life cycle. Based on the insights obtained from this LCA, some recommendations have been proposed to address potential environmental repercussions pre-emptively and proactively: this is particularly important for nations, mainly in the Global South, that exhibit low resilience to climate change due to limited economic resources. Furthermore, with the rapid expansion of mycelium composite technology, there is a need to increase awareness about its potential environmental impact and, ultimately, to mitigate its potential contribution to pressing environmental concerns (e.g., global warming and climate change). Consequently, this study also adds to the existing body of literature on LCA studies, delineating key factors for consideration in future LCA studies and providing guidance for the sustainable establishment and expansion of this technology.

Detonation of fulminating gold produces heterogeneous gold nanoparticles

Fulminating gold, the first high-explosive compound to be discovered, disintegrates into a mysterious cloud of purple smoke, the nature of which has been speculated upon since its discovery in the 15th century. In this work, we show that the colour of the smoke is due to the presence of gold nanoparticles.

Self-Healing Composite Coating Fabricated with a Cystamine Cross-Linked Cellulose Nanocrystal-Stabilized Pickering Emulsion

A gelled Pickering emulsion system was fabricated by first stabilizing linseed oil droplets in water with dialdehyde cellulose nanocrystals (DACNCs) and then cross-linking with cystamine. Cross-linking of the DACNCs was shown to occur by a reaction between the amine groups on cystamine and the aldehyde groups on the CNCs, causing gelation of the nanocellulose suspension. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy were used to characterize the cystamine-cross-linked CNCs (cysCNCs), demonstrating their presence. Transmission electron microscopy images evidenced that cross-linking between cysCNCs took place. This cross-linking was utilized in a linseed oil-in-water Pickering emulsion system, creating a novel gelled Pickering emulsion system. The rheological properties of both DACNC suspensions and nanocellulose-stabilized Pickering emulsions were monitored during the cross-linking reaction. Dynamic light scattering and confocal laser scanning microscopy (CLSM) of the Pickering emulsion before gelling imaged CNC-stabilized oil droplets along with isolated CNC rods and CNC clusters, which had not been adsorbed to the oil droplet surfaces. Atomic force microscopy imaging of the air-dried gelled Pickering emulsion also demonstrated the presence of free CNCs alongside the oil droplets and the cross-linked CNC network directly at the oil-water interface on the oil droplet surfaces. Finally, these gelled Pickering emulsions were mixed with poly(vinyl alcohol) solutions and fabricated into self-healing composite coating systems. These self-healing composite coatings were then scratched and viewed under both an optical microscope and a scanning electron microscope before and after self-healing. The linseed oil was demonstrated to leak into the scratches, healing the gap automatically and giving a practical approach for a variety of potential applications.

Advances in Smart Photovoltaic Textiles

Energy harvesting textiles have emerged as a promising solution to sustainably power wearable electronics. Textile-based solar cells (SCs) interconnected with on-body electronics have emerged to meet such needs. These technologies are lightweight, flexible, and easy to transport while leveraging the abundant natural sunlight in an eco-friendly way. In this Review, we comprehensively explore the working mechanisms, diverse types, and advanced fabrication strategies of photovoltaic textiles. Furthermore, we provide a detailed analysis of the recent progress made in various types of photovoltaic textiles, emphasizing their electrochemical performance. The focal point of this review centers on smart photovoltaic textiles for wearable electronic applications. Finally, we offer insights and perspectives on potential solutions to overcome the existing limitations of textile-based photovoltaics to promote their industrial commercialization.

Phosphorylated cellulose nanocrystals: Optimizing production by decoupling hydrolysis and surface modification

Urea and phosphoric acid are essential for the isolation of phosphorylated cellulose nanocrystals (CNCs). Besides limiting dissolution of nanocrystals, urea facilitates the swelling of fibres thus increasing access for the phosphorylating agent. The aim of this study was to determine optimal conditions for isolation of highly charged phosphorylated CNCs. Using a design of experiments approach, seventeen experiments in which reaction time, urea, and acid concentrations were varied, were conducted. A two-step process was used, in which CNCs were first isolated by treatment in phosphoric acid, and then treated with metaphosphoric acid, and urea. It is shown that a design of experiments approach to the phosphorylation of CNCs allows a much lower ratio of urea to acid than has previously been reported. CNCs with high surface charge (~1800 mmol kg-1) are possible using this method. This information is instructive to phosphorylation of cellulose nanomaterials which have a variety of applications e.g., water purification and medical biomaterials.

Comparison and assessment of methods for cellulose crystallinity determination

The degree of crystallinity in cellulose significantly affects the physical, mechanical, and chemical properties of cellulosic materials, their processing, and their final application. Measuring the crystalline structures of cellulose is a challenging task due to inadequate consistency among the variety of analytical techniques available and the lack of absolute crystalline and amorphous standards. Our article reviews the primary methods for estimating the crystallinity of cellulose, namely, X-ray diffraction (XRD), nuclear magnetic resonance (NMR), Raman and Fourier-transform infrared (FTIR) spectroscopy, sum-frequency generation vibrational spectroscopy (SFG), as well as differential scanning calorimetry (DSC), and evolving biochemical methods using cellulose binding molecules (CBMs). The techniques are compared to better interrogate not only the requirements of each method, but also their differences, synergies, and limitations. The article highlights fundamental principles to guide the general community to initiate studies of the crystallinity of cellulosic materials.

Tackling the challenge of drying and redispersion of cellulose nanofibrils via membrane-facilitated liquid phase exchange

It is generally acknowledged that to advance the application of cellulose nanofibrils (CNFs) in product formulations, challenges associated with the drying and redispersion of this material must be addressed. Despite increased research efforts in this area, these interventions still involve the use of additives or conventional drying technologies, which both have the capacity to drive up the cost of the final CNF powders. Herein, we prepared dried and redispersible CNF powders with varying surface functionalities without the use of additives nor conventional drying technologies. Rapid drying in air was achieved after liquid phase exchange from water to isopropyl alcohol. The surface properties, morphology and thermal stabilities were the same for the never-dried and redispersed forms. The rheological properties of the CNFs were also unaffected after drying and redispersion of unmodified and organic acid modified materials. However, for 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO)-mediated oxidised CNFs with higher surface charge and longer fibrils, the storage modulus could not be recovered to the never-dried state because of the possible non-selective reduction in length upon redispersion. Nevertheless, this method provides an effective and low-cost process for the drying and redispersion of unmodified and surface modified CNFs.

Cellulose: A Review of Water Interactions, Applications in Composites, and Water Treatment

Cellulose is known to interact well with water, but is insoluble in it. Many polysaccharides such as cellulose are known to have significant hydrogen bond networks joining the molecular chains, and yet they are recalcitrant to aqueous solvents. This review charts the interaction of cellulose with water but with emphasis on the formation of both natural and synthetic fiber composites. Covering studies concerning the interaction of water with wood, the biosynthesis of cellulose in the cell wall, to its dispersion in aqueous suspensions and ultimately in water filtration and fiber-based composite materials this review explores water-cellulose interactions and how they can be exploited for synthetic and natural composites. The suggestion that cellulose is amphiphilic is critically reviewed, with relevance to its processing. Building on this, progress made in using various charged and modified forms of nanocellulose to stabilize oil-water emulsions is addressed. The role of water in the aqueous formation of chiral nematic liquid crystals, and subsequently when dried into composite films is covered. The review will also address the use of cellulose as an aid to water filtration as one area where interactions can be used effectively to prosper human life.

Stable Sodium-Metal Batteries in Carbonate Electrolytes Achieved by Bifunctional, Sustainable Separators with Tailored Alignment

Sodium (Na) is the most appealing alternative to lithium as an anode material for cost-effective, high-energy-density energy-storage systems by virtue of its high theoretical capacity and abundance as a resource. However, the uncontrolled growth of Na dendrites and the limited cell cycle life impede the large-scale practical implementation of Na-metal batteries (SMBs) in commonly used and low-cost carbonate electrolytes. Herein, the employment of a novel bifunctional electrospun nanofibrous separator comprising well-ordered, uniaxially aligned arrays, and abundant sodiophilic functional groups is presented for SMBs. By tailoring the alignment degree, this unique separator integrates with the merits of serving as highly aligned ion-redistributors to self-orientate/homogenize the flux of Na-ions from a chemical molecule level and physically suppressing Na dendrite puncture at a mechanical structure level. Remarkably, unprecedented long-term cycling performances at high current densities (≥1000 h at 1 and 3 mA cm^-2 , ≥700 h at 5 mA cm^-2 ) of symmetric cells are achieved in additive-free carbonate electrolytes. Moreover, the corresponding sodium-organic battery demonstrates a high energy density and prolonged cyclability over 1000 cycles. This work opens up a new and facile avenue for the development of stable, low-cost, and safe-credible SMBs, which could be readily extended to other alkali-metal batteries.

Octylamine-Modified Cellulose Nanocrystal-Enhanced Stabilization of Pickering Emulsions for Self-Healing Composite Coatings

Linseed oil-in-water Pickering emulsions are stabilized by both sulfated CNCs (sCNCs) and octylamine-modified CNCs (oCNCs). oCNCs with hydrophobic moieties grafted on the surfaces of otherwise intact nanocrystals provided emulsions exhibiting stronger resistance to creaming of oil droplets, compared with unmodified sCNCs. sCNCs were not able to completely stabilize linseed oil in water at low CNC concentrations while oCNCs provided emulsions with no unemulsified oil residue at the same concentrations. Oil droplets in oCNC emulsions were smaller than those in samples stabilized by sCNCs, corresponding with an increased hydrophobicity of oCNCs. Cryo-SEM imaging of stabilized droplets demonstrated the formation of a CNC network at the oil-water interface, protecting the oil droplets from coalescence even after compaction under centrifugal force. These oil droplets, protected by a stabilized CNC network, were dispersed in a water-based commercial varnish, to generate a composite coating. Scratches made on these coatings self-healed as a result of the reaction of the linseed oil bled from the damaged droplets with oxygen. The leakage and drying of the linseed oil at the location of the scratches happened without intervention and was accelerated by the application of heat.

Lightweight, strong, moldable wood via cell wall engineering as a sustainable structural material

[Figure: see text].

Postsynthesis Self- And Coassembly of Enzymatically Produced Fluorinated Cellodextrins and Cellulose Nanocrystals

The design of new functional materials and devices substantially relies on self-assembly of hierarchical structures. Formation of 2D platelets is known in the enzymatic synthesis of cellulose-like polymers. Here we demonstrate the feasibility of postsynthesis assembly of novel fluorinated cellodextrins. Highly ordered 2D structures of large lateral dimensions, unattainable in the polymerization process, can be formed because of postsynthesis assembly of the cellodextrins. These cellodextrins were also involved in coassembly with cellulose nanocrystals (CNCs) leading to hybrid systems. The hybrid architectures obtained depend on the content of fluorine atoms in the fluorinated cellodextrins. Monofluorinated cellodextrins coassemble with CNCs into a nanoweb, while multifluorinated cellodextrins assemble around the CNCs.

Beyond What Meets the Eye: Imaging and Imagining Wood Mechanical-Structural Properties

Wood presents a hierarchical structure, containing features at all length scales: from the tracheids or vessels that make up its cellular structure, through to the microfibrils within the cell walls, down to the molecular architecture of the cellulose, lignin, and hemicelluloses that comprise its chemical makeup. This structure renders it with high mechanical (e.g., modulus and strength) and interesting physical (e.g., optical) properties. A better understanding of this structure, and how it plays a role in governing mechanical and other physical parameters, will help to better exploit this sustainable resource. Here, recent developments on the use of advanced imaging techniques for studying the structural properties of wood in relation to its mechanical properties are explored. The focus is on synchrotron nuclear magnetic resonance spectroscopy, X-ray diffraction, X-ray tomographical imaging, Raman and infrared spectroscopies, confocal microscopy, electron microscopy, and atomic force microscopy. Critical discussion on the role of imaging techniques and how fields are developing rapidly to incorporate both spatial and temporal ranges of analysis is presented.

Chemoenzymatic Synthesis of Fluorinated Cellodextrins Identifies a New Allomorph for Cellulose-Like Materials*

Understanding the fine details of the self-assembly of building blocks into complex hierarchical structures represents a major challenge en route to the design and preparation of soft-matter materials with specific properties. Enzymatically synthesised cellodextrins are known to have limited water solubility beyond DP9, a point at which they self-assemble into particles resembling the antiparallel cellulose II crystalline packing. We have prepared and characterised a series of site-selectively fluorinated cellodextrins with different degrees of fluorination and substitution patterns by chemoenzymatic synthesis. Bearing in mind the potential disruption of the hydrogen-bond network of cellulose II, we have prepared and characterised a multiply 6-fluorinated cellodextrin. In addition, a series of single site-selectively fluorinated cellodextrins was synthesised to assess the structural impact upon the addition of one fluorine atom per chain. The structural characterisation of these materials at different length scales, combining advanced NMR spectroscopy and microscopy methods, showed that a 6-fluorinated donor substrate yielded multiply 6-fluorinated cellodextrin chains that assembled into particles presenting morphological and crystallinity features, and intermolecular interactions, that are unprecedented for cellulose-like materials.

Hydrophobized cellulose nanocrystals enhance xanthan and locust bean gum network properties in gels and emulsions

Locust bean/xanthan gum (LBG/XG) synergistic networks have previously been well studied, with evidence that junction zones between the two polymers result in hydrophobic domains. Here we report on the effect of both hydrophilic and hydrophobic cellulose nanocrystals (CNCs) on the rheological properties of the individual gums, the gum networks, and emulsion gels consisting of the gum network and corn oil. We also take advantage of differences in the autofluorescent spectra for each of the components to map their distribution within the gel and emulsion gel systems. Whilst both types of CNC confer thermal stability to the systems, hydrophilic CNCs induce minor changes in rheological properties of synergistic gels and prove to be detrimental to the stability of the emulsion gels. In contrast, hydrophobic CNCs associate with the LBG/XG network, affecting the rheological response. Their inclusion in the emulsion gel system results in smaller, more homogeneously distributed oil droplets with a resultant increase in the storage modulus by an order of magnitude compared to the CNC-free and hydrophilic CNC systems. We conclude that hydrophobic CNCs play a critical role in stabilising LBG/XG network gels and emulsions.

Characterisation of Natural Fibres for Sustainable Discontinuous Fibre Composite Materials

Growing environmental concerns and stringent waste-flow regulations make the development of sustainable composites a current industrial necessity. Natural fibre reinforcements are derived from renewable resources and are both cheap and biodegradable. When they are produced using eco-friendly, low hazard processes, then they can be considered as a sustainable source of fibrous reinforcement. Furthermore, their specific mechanical properties are comparable to commonly used, non-environmentally friendly glass-fibres. In this study, four types of abundant natural fibres (jute, kenaf, curaua, and flax) are investigated as naturally-derived constituents for high performance composites. Physical, thermal, and mechanical properties of the natural fibres are examined to evaluate their suitability as discontinuous reinforcements whilst also generating a database for material selection. Single fibre tensile and microbond tests were performed to obtain stiffness, strength, elongation, and interfacial shear strength of the fibres with an epoxy resin. Moreover, the critical fibre lengths of the natural fibres, which are important for defining the mechanical performances of discontinuous and short fibre composites, were calculated for the purpose of possible processing of highly aligned discontinuous fibres. This study is informative regarding the selection of the type and length of natural fibres for the subsequent production of discontinuous fibre composites.

Hydrophobization of Cellulose Nanocrystals for Aqueous Colloidal Suspensions and Gels

Surface hydrophobization of cellulose nanomaterials has been used in the development of nanofiller-reinforced polymer composites and formulations based on Pickering emulsions. Despite the well-known effect of hydrophobic domains on self-assembly or association of water-soluble polymer amphiphiles, very few studies have addressed the behavior of hydrophobized cellulose nanomaterials in aqueous media. In this study, we investigate the properties of hydrophobized cellulose nanocrystals (CNCs) and their self-assembly and amphiphilic properties in suspensions and gels. CNCs of different hydrophobicity were synthesized from sulfated CNCs by coupling primary alkylamines of different alkyl chain lengths (6, 8, and 12 carbon atoms). The synthetic route permitted the retention of surface charge, ensuring good colloidal stability of hydrophobized CNCs in aqueous suspensions. We compare surface properties (surface charge, ζ potential), hydrophobicity (water contact angle, microenvironment probing using pyrene fluorescence emission), and surface activity (tensiometry) of different hydrophobized CNCs and hydrophilic CNCs. Association of hydrophobized CNCs driven by hydrophobic effects is confirmed by X-ray scattering (SAXS) and autofluorescent spectroscopy experiments. As a result of CNC association, CNC suspensions/gels can be produced with a wide range of rheological properties depending on the hydrophobic/hydrophilic balance. In particular, sol-gel transitions for hydrophobized CNCs occur at lower concentrations than hydrophilic CNCs, and more robust gels are formed by hydrophobized CNCs. Our work illustrates that amphiphilic CNCs can complement associative polymers as modifiers of rheological properties of water-based systems.

Employing photoluminescence to rapidly follow aggregation and dispersion of cellulose nanofibrils

Multichannel confocal spectroscopy enables tracking of time dependent, spatially resolved changes in the physicochemical environment of cellulose nanofibrils due to variation in emission intensity ratios.

Rapid Determination of the Distribution of Cellulose Nanomaterial Aggregates in Composites Enabled by Multi-Channel Spectral Confocal Microscopy

There is increased interest in the use of cellulose nanomaterials for the mechanical reinforcement of composites due to their high stiffness and strength. However, challenges remain in accurately determining their distribution within composite microstructures. We report the use of a range of techniques used to image aggregates of cellulose nanocrystals (CNCs) greater than 10 µm2 within a model thermoplastic polymer. While Raman imaging accurately determines CNC aggregate size, it requires extended periods of analysis and the limited observable area results in poor reproducibility. In contrast, staining the CNCs with a fluorophore enables rapid acquisition with high reproducibility, but overestimates the aggregate size as CNC content increases. Multi-channel spectral confocal laser scanning microscopy is presented as an alternative technique that combines the accuracy of Raman imaging with the speed and reproducibility of conventional confocal laser scanning microscopy, enabling the rapid determination of CNC aggregate distribution within composites.

Characterization of pulp derived nanocellulose hydrogels using AVAP® technology

Bioinspiration from hierarchical structures found in natural environments has heralded a new age of advanced functional materials. Nanocellulose has received significant attention due to the demand for high-performance materials with tailored mechanical, physical and biological properties. In this study, nanocellulose fibrils, nanocrystals and a novel mixture of fibrils and nanocrystals (blend) were prepared from softwood biomass using the AVAP® biorefinery technology. These materials were characterized using transmission and scanning electron microscopy, and atomic force microscopy. This analysis revealed a nano- and microarchitecture with extensive porosity. Notable differences included the nanocrystals exhibiting a compact packing of nanorods with reduced porosity. The NC blend exhibited porous fibrillar networks with interconnecting compact nanorods. Fourier transform infrared spectroscopy and X-ray diffraction confirmed a pure cellulose I structure. Thermal studies highlighted the excellent stability of all three NC materials with the nanocrystals having the highest decomposition temperature. Surface charge analysis revealed stable colloid suspensions. Rheological studies highlighted a dominance of elasticity in all variants, with the NC blend being more rigid than the NC fibrils and nanocrystals, indicating a double network hydrogel structure. Given these properties, it is thought that these materials show great potential in (bio)nanomaterial applications where careful control of microarchitecture, surface topography and porosity are required.

Mechanically Robust Gels Formed from Hydrophobized Cellulose Nanocrystals

Cellulose nanocrystals (CNCs) that bind to each other through associative hydrophobic interactions have been synthesized by modifying sulfated CNCs (sCNCs) with hydrophobic moieties. These octyl-CNCs form gels at significantly lower concentrations than parent sCNCs, producing extremely strong hydrogels. Unlike sCNCs, these octyl-CNCs do not form ordered liquid crystalline phases indicating a random association into a robust network driven by hydrophobic interactions. Furthermore, involvement of the octyl-CNCs into multicomponent supramolecular assembly was demonstrated in combination with starch. AFM studies confirm favorable interactions between starch and octyl-CNCs, which is thought to be the source of the dramatic increase in gel strength.

Current characterization methods for cellulose nanomaterials

A new family of materials comprised of cellulose, cellulose nanomaterials (CNMs), having properties and functionalities distinct from molecular cellulose and wood pulp, is being developed for applications that were once thought impossible for cellulosic materials. Commercialization, paralleled by research in this field, is fueled by the unique combination of characteristics, such as high on-axis stiffness, sustainability, scalability, and mechanical reinforcement of a wide variety of materials, leading to their utility across a broad spectrum of high-performance material applications. However, with this exponential growth in interest/activity, the development of measurement protocols necessary for consistent, reliable and accurate materials characterization has been outpaced. These protocols, developed in the broader research community, are critical for the advancement in understanding, process optimization, and utilization of CNMs in materials development. This review establishes detailed best practices, methods and techniques for characterizing CNM particle morphology, surface chemistry, surface charge, purity, crystallinity, rheological properties, mechanical properties, and toxicity for two distinct forms of CNMs: cellulose nanocrystals and cellulose nanofibrils.

Magnetically responsive and flexible bacterial cellulose membranes

Magnetically responsive and flexible bacterial cellulose (BC) membranes were successfully fabricated using a simple diffusion of a ferrofluid solution. BC hydrogels were either water-substituted by alcohol (BC-N) or freeze dried (BC-F) prior to their immersion in the ferrofluid. The presence of both crystalline BC and Fe₃O₄ phases, and the homogeneous distribution of nanoparticles (NPs) in BC nanofibrils were observed. Higher concentrations of Fe₃O₄ NPs were found in the BC-N samples than for the BC-F samples. Higher magnetization in the BC-N samples was observed compared to the BC-F samples. Mechanical properties tests showed the higher strength and Young's modulus for the BC-F samples was possibly due to their more compacted nanostructure compared to BC-N. Using this simple process, the magnetic BC membranes show elastic properties upon deformation, returning to their original shape without damage. Also, they were highly sensitive to external magnetic forces giving them potential for many applications.

Quantitative analysis of the distribution and mixing of cellulose nanocrystals in thermoplastic composites using Raman chemical imaging

Raman chemical imaging is presented to both quantify the dispersion and the degree of mixing in a cellulose nanocrystal composite.

Injectable Highly Loaded Cellulose Nanocrystal Fibers and Composites

Cellulose nanocrystals (CNC)/poly(ethylene oxide) (PEO) composite fibers were successfully produced in situ by injection into a hydrophobic solvent. Using a similar principle, a single step manufacturing method of injectable composites was developed by injection of a CNC solution into a hydrophobic resin. Molecular orientation and deformation of the fibers and composites were obtained using Raman spectroscopy. CNCs were found to be highly aligned along the fiber's axes, as confirmed by 2-fold symmetry of polar plots and second and fourth order orientation parameters. A shift in the position of a characteristic Raman band, initially located at ∼1095 cm^-1, corresponding to vibrations of the cellulose backbone polymer chains was followed under tensile deformation. Using this shift, it was possible to estimate the fiber modulus as being ∼33 GPa, which is remarkably high. Stress transfer between the hydrophobic resin and the injected CNC fibers was quantified in this new type of composite using a modified shear-lag theory showing that appreciable reinforcement occurs. Our approach presents a new way to introduce highly loaded CNC fibers in situ into a composite structure.

Preparation and characterization of polycaprolactone microspheres by electrospraying

The ability to reproducibly produce and effectively collect electrosprayed polymeric microspheres with controlled morphology and size in bulk form is challenging. In this study, microparticles were produced by electrospraying polycaprolactone (PCL) of various molecular weights and solution concentrations in chloroform, and by collecting materials on different substrates. The resultant PCL microparticles were characterized by optical and electron microscopy to investigate the effect of molecular weight, solution concentration, applied voltage, working distance, and flow rate on their morphology and size. The work demonstrates the key role of a moderate molecular weight and/or solution concentration in the formation of spherical PCL particles via an electrospraying process. Increasing the applied voltage was found to produce smaller and more uniform PCL microparticles. There was a relatively low increase in the particle average size with an increase in the working distance and flow rate. Four types of substrates were adopted to collect electrosprayed PCL particles: a glass slide, aluminium foil, liquid bath, and copper wire. Unlike 2D bulk structures collected on the other substrates, a 3D tubular structure of microspheres was formed on the copper wire which could find application in the construction of 3D tumor mimics.

Production and cross-sectional characterization of aligned co-electrospun hollow microfibrous bulk assemblies

The development of co-electrospun (co-ES) hollow microfibrous assemblies of an appreciable thickness is critical for many practical applications, including filtration membranes and tissue-mimicking scaffolds. In this study, thick uniaxially aligned hollow microfibrous assemblies forming fiber bundles and strips were prepared by co-ES of polycaprolactone (PCL) and polyethylene oxide (PEO) as shell and core materials, respectively. Hollow microfiber bundles were deposited on a fixed rotating disc, which resulted in non-controllable cross-sectional shapes on a macroscopic scale. In comparison, fiber strips were produced with tuneable thickness and width by additionally employing an x-y translation stage in co-ES. Scanning electron microscopy (SEM) images of cross-sections of fiber assemblies were analyzed to investigate the effects of production time (from 0.5 h to 12 h), core flow rate (from 0.8 mL/h to 2.0 mL/h) and/or translation speed (from 0.2 mm/s to 5 mm/s) on the pores and porosity. We observed significant changes in pore size and shape with core flow rate but the influence of production time varied; five strips produced under the same conditions had reasonably good size and porosity reproducibility; pore sizes didn't vary significantly from strip bottom to surface, although the porosity gradually decreased and then returned to the initial level.

Biomimetic phantom for the validation of diffusion magnetic resonance imaging

PURPOSE

A range of advanced diffusion MRI (dMRI) techniques are currently in development which characterize the orientation of white matter fibers using diffusion tensor imaging (DTI). There is a need for a physical phantom with microstructural features of the brain's white matter to help validate these methods.

METHODS

Hollow, co-electrospun, aligned fibers with a tuneable size distribution have been produced in bulk and with an MR visible solvent infused into the pores. The morphology and size of the phantoms was assessed using scanning electron microscopy (SEM) and compared with DTI results obtained on both a clinical and preclinical scanner.

RESULTS

By varying inner diameter of the phantom fibers (from SEM: 9.5 μm, 11.9 μm, 13.4 μm) the radial diffusivity and fractional anisotropy, calculated from DTI, vary between 0.38 ± 0.05 × 10(3) and 0.61 ± 0.06 × 10(3) cm s(-1) and between 0.45 ± 0.05 and 0.33 ± 0.04, respectively.

CONCLUSION

We envisage that these materials will be used for the validation of novel and established methods within the field of diffusion MRI, as well as for routine quality assurance purposes and for establishing scanner performance in multicenter trials.

Supercapacitance from cellulose and carbon nanotube nanocomposite fibers

Multiwalled carbon nanotube (MWNT)/cellulose composite nanofibers have been prepared by electrospinning a MWNT/cellulose acetate blend solution followed by deacetylation. These composite nanofibers were then used as precursors for carbon nanofibers (CNFs). The effect of nanotubes on the stabilization of the precursor and microstructure of the resultant CNFs were investigated using thermogravimetric analysis, transmission electron microscopy and Raman spectroscopy. It is demonstrated that the incorporated MWNTs reduce the activation energy of the oxidative stabilization of cellulose nanofibers from ∼230 to ∼180 kJ mol(-1). They also increase the crystallite size, structural order, and electrical conductivity of the activated CNFs (ACNFs). The surface area of the ACNFs increased upon addition of nanotubes which protrude from the fiber leading to a rougher surface. The ACNFs were used as the electrodes of a supercapacitor. The electrochemical capacitance of the ACNF derived from pure cellulose nanofibers is demonstrated to be 105 F g(-1) at a current density of 10 A g(-1), which increases to 145 F g(-1) upon the addition of 6% of MWNTs.

Bacterial cellulose scaffolds and cellulose nanowhiskers for tissue engineering

As the principle structural polysaccharide in plants, cellulose has been extensively characterized over many decades. In recent years, however, exciting new cellulosic materials have been developed with nanoscale fibrillar structures that have particularly promising applications in the growing field of tissue engineering. The majority of recent studies on cellulose nanomaterials for tissue engineering have employed bacterial cellulose, a material with a profile of properties unique among biomaterials commonly used in tissue engineering scaffolds. In addition, a number of recent studies have explored the biomedical applications of discrete colloidal nanocellulose fibrils known as cellulose nanowhiskers or cellulose nanocrystals. The literature on bacterial cellulose scaffolds for tissue engineering is reviewed, and studies on the biocompatibility of cellulose nanowhiskers and their potential for tissue engineering are discussed. Challenges for future development of these materials and potential future advances are also considered.

Isolation and characterization of microcrystalline cellulose from oil palm biomass residue

In this work, we successfully isolated microcrystalline cellulose (MCC) from oil palm empty fruit bunch (OPEFB) fiber-total chlorine free (TCF) pulp using acid hydrolysis method. TCF pulp bleaching carried out using an oxygen-ozone-hydrogen peroxide bleaching sequence. Fourier transform infrared (FT-IR) spectroscopy indicates that acid hydrolysis does not affect the chemical structure of the cellulosic fragments. The morphology of the hydrolyzed MCC was investigated using scanning electron microscopy (SEM), showing a compact structure and a rough surface. Furthermore, atomic force microscopy (AFM) image of the surface indicates the presence of spherical features. X-ray diffraction (XRD) shows that the MCC produced is a cellulose-I polymorph, with 87% crystallinity. The MCC obtained from OPEFB-pulp is shown to have a good thermal stability. The potential for a range of applications such as green nano biocomposites reinforced with this form of MCC and pharmaceutical tableting material is discussed.

Oriented surfaces of adsorbed cellulose nanowhiskers promote skeletal muscle myogenesis

Cellulose nanowhiskers (CNWs) are high-aspect-ratio rod-like nanoparticles prepared via partial hydrolysis of cellulose. For the first time, CNWs have been extracted from the marine invertebrate Ascidiella aspersa, yielding animal-derived CNWs with particularly small diameters of only a few nanometres. Oriented surfaces of adsorbed CNWs were prepared using a flexible and facile spin-coating method, allowing the modulation of CNW adsorption and relative orientation. Due to the shape and nanoscale dimensions of the CNWs, C2C12 myoblasts adopted increasingly oriented morphologies in response to more densely adsorbed and oriented CNW surfaces. In addition, the degree of myoblast fusion was greatest on the highly oriented CNW surfaces, and even low-orientation CNW surfaces promoted more extensive fusion than flat control surfaces. Highly oriented multinuclear myotubes formed on the oriented CNW surfaces and fibrillar fibronectin deposited on the surfaces was also modelled in a highly oriented arrangement after only 4 days in culture. With a mean feature height of only 5-6 nm, the CNW surfaces present the smallest features ever reported to induce contact guidance in skeletal muscle myoblasts, highlighting the potential for nanoscale materials for engineering oriented tissues such as skeletal muscle.

Stiff as a Board: Perspectives on the Crystalline Modulus of Cellulose

A viewpoint on the importance of the accurate determination of the crystal modulus of cellulose is given with respect to recent advances in extracting high modulus nanofibrils/fibers from plants and production by bacteria and animals. Often the modulus of these nanofibrils/fibers is assumed to be the same as the crystal modulus of cellulose. Both experimental and theoretical calculations of the crystal modulus of cellulose are discussed and put in context of the use of cellulose nanofibers for high stiffness composites. New research into the exact nature of the structure of cellulose nanofibers is suggested, with a view to better processing routes for realizing high modulus/low density materials.

Coaxially electrospun axon-mimicking fibers for diffusion magnetic resonance imaging

The study of brain structure and connectivity using diffusion magnetic resonance imaging (dMRI) has recently gained substantial interest. However, the use of dMRI still faces major challenges because of the lack of standard materials for validation. The present work reports on brain tissue-mimetic materials composed of hollow microfibers for application as a standard material in dMRI. These hollow fibers were fabricated via a simple and one-step coaxial electrospining (co-ES) process. Poly(ε-caprolactone) (PCL) and polyethylene oxide (PEO) were employed as shell and core materials, respectively, to achieve the most stable co-ES process. These co-ES hollow PCL fibers have different inner diameters, which mainly depend on the flow rate of the core solution and have the potential to cover the size range of the brain tissue we aimed to mimic. Co-ES aligned hollow PCL fibers were characterized using optical and electron microscopy and tested as brain white matter mimics on a high-field magnetic resonance imaging (MRI) scanner. To the best of our knowledge, this is the first time that co-ES hollow fibers have been successfully used as a tissue mimic or phantom in diffusion MRI. The results of the present study provide evidence that this phantom can mimic the dMRI behavior of cellular barriers imposed by axonal cell membranes and myelin; the measured diffusivity is compatible with that of in vivo biological tissues. Together these results suggest the potential use of co-ES hollow microfibers as tissue-mimicking phantoms in the field of medical imaging.

Influence of magnetic field alignment of cellulose whiskers on the mechanics of all-cellulose nanocomposites

Orientation of cellulose nanowhiskers (CNWs) derived from tunicates, in an all-cellulose nanocomposite, is achieved through the application of a magnetic field. CNWs are incorporated into a dissolved cellulose matrix system and during solvent casting of the nanocomposite a magnetic field is applied to induce their alignment. Unoriented CNW samples, without the presence of a magnetic field, are also produced. The CNWs are found to orient under the action of the magnetic field, leading to enhanced stiffness and strength of the composites, but not to the level that is theoretically predicted for a fully aligned system. Lowering the volume fraction of the CNWs is shown to allow them to orient more readily in the magnetic field, leading to larger relative increases in the mechanical properties. It is shown, using polarized light microscopy, that the all-cellulose composites have a domain structure, with some domains showing pronounced orientation of CNWs and others where no preferred orientation occurs. Raman spectroscopy is used to both follow the position of bands located at ~1095 and ~895 cm(-1) with deformation and also their intensity as a function rotation angle of the specimens. It is shown that these approaches give valuable independent information on the respective molecular deformation and orientation of the CNWs, and the molecules in the matrix phase, in oriented and nonoriented domains of all-cellulose composites. These data are then related to an increase in the level of molecular deformation in the axial direction, as revealed by the Raman technique. Little orientation of the matrix phase is observed under the action of the magnetic field indicating the dominance of the stiff CNWs in governing mechanical properties.

Micromechanics of TEMPO-oxidized fibrillated cellulose composites

Composites of poly(lactic) acid (PLA) reinforced with TEMPO-oxidized fibrillated cellulose (TOFC) were prepared to 15, 20, 25, and 30% fiber weight fractions. To aid dispersion and to improve stress transfer, we acetylated the TOFC prior to the fabrication of TOFC-PLA composite films. Raman spectroscopy was employed to study the deformation micromechanics in these systems. Microtensile specimens were prepared from the films and deformed in tension with Raman spectra being collected simultaneously during deformation. A shift in a Raman peak initially located at ~1095 cm(-1), assigned to C-O-C stretching of the cellulose backbone, was observed upon deformation, indicating stress transfer from the matrix to the TOFC reinforcement. The highest band shift rate, with respect to strain, was observed in composites having a 30% weight fraction of TOFC. These composites also displayed a significantly higher strain to failure compared to pure acetylated TOFC film, and to the composites having lower weight fractions of TOFC. The stress-transfer processes that occur in microfibrillated cellulose composites are discussed with reference to the micromechanical data presented. It is shown that these TOFC-based composite materials are progressively dominated by the mechanics of the networks, and a shear-lag type stress transfer between fibers.

An artificial biomineral formed by incorporation of copolymer micelles in calcite crystals

Biominerals exhibit morphologies, hierarchical ordering and properties that invariably surpass those of their synthetic counterparts. A key feature of these materials, which sets them apart from synthetic crystals, is their nanocomposite structure, which derives from intimate association of organic molecules with the mineral host. We here demonstrate the production of artificial biominerals where single crystals of calcite occlude a remarkable 13 wt% of 20 nm anionic diblock copolymer micelles, which act as 'pseudo-proteins'. The synthetic crystals exhibit analogous texture and defect structures to biogenic calcite crystals and are harder than pure calcite. Further, the micelles are specifically adsorbed on {104} faces and undergo a change in shape on incorporation within the crystal lattice. This system provides a unique model for understanding biomineral formation, giving insight into both the mechanism of occlusion of biomacromolecules within single crystals, and the relationship between the macroscopic mechanical properties of a crystal and its microscopic structure.

Interfacial energy dissipation in a cellulose nanowhisker composite

Cyclic tensile and compressive deformation is applied to cellulose nanowhisker-epoxy resin based model nanocomposites. The molecular deformation of the cellulose nanowhiskers within the epoxy resin matrix is followed using a Raman spectroscopy technique, whereby shifts in the position of a band located at ∼ 1095 cm(-1) are shown to correlate directly with a breakdown in the interfaces between the resin and the nanowhiskers and between nanowhiskers themselves. A theoretical model is used to determine the dissipation of energy at the interfaces between whiskers and at the whisker-matrix interface. This approach is shown to be useful for interpreting the local micromechanics of these materials by providing a quantitative measure of the quality of the interface.