Novel vinegar solution for denture-cleansing agent

PURPOSE

To study the antimicrobial effects of a novel vinegar-based denture cleansing agent on oral Streptococci and Candida species and the inhibitory effects on pre-formed bacterial and Candida biofilms on denture base.

METHODS

The microorganisms used in this study were Streptococcus mutans (S. mutans), Streptococcus sobrinus (S. sobrinus), Streptococcus sanguinis (S. sanguinis), Candida albicans (C. albicans), and Candida glabrata (C. glabrata). The antimicrobial activity of novel vinegar solution was evaluated by time kill assay and biofilm grown on denture base.

RESULTS

Time kill assay showed that vinegar exhibited the highest antibacterial effect on S. sobrinus, S. sanguinis, and S. mutans after 15 min of treatment. A 99.9% reduction in C. glabrata and C. albicans required more than 4 and 6 h of treatment, respectively. Vinegar significantly inhibited streptococcal biofilm, with an approximately 6 log-reduction at 30 min of treatment. The results demonstrated that viable Candida cells in biofilm reduced in excess of 6-log CFU/mL after 3 h treatment with vinegar. Moreover, the vinegar-based denture cleanser inhibited bacterial and Candida biofilm formation compared to the control group without treatment with statistical significance.

CONCLUSION

A novel vinegar-based denture cleansing agent showed moderate antibacterial properties, but required a slightly longer immersion time to attain anticandidal effects compared to Polident and 0.2% CHX.

Buffering capacity and antibacterial properties among bioactive glass-containing orthodontic adhesives

This study was to evaluate the acid-buffering capacity and antibacterial properties of orthodontic adhesives containing bioactive glasses (BAGs) (45S5, 45S5F, S53P4), Hydroxyapatite, beta-tricalcium phosphate, and Canasite. Fillers comprising 15 wt% bioactive glasses, HAp, β-TCP, and Canasite incorporated with 55 wt% silanated glass were added to a mixture of UDMA/TEGDMA. Acid-buffering capacity was tested by exposing disc-shaped samples of each adhesive to medium of bacteria-produced acids, and pH changes were recorded at 24 and 48 h. Antibacterial properties were assessed by indirect testing by exposing polymerized adhesive samples to a medium and direct testing by immersing the specimens in solutions containing S. mutans and S. sanguinis. A significant buffering capacity was shown by the 45S5, 45S5F and S53P4 BAG adhesives. The antibacterial properties were not significant in all experimental adhesives. Therefore, the experimental orthodontic adhesives containing BAGs demonstrated a significant buffering capacity but did not show significant antibacterial properties against S. mutans and S. sanguinis.

Effect of surface chemistry-modified polycaprolactone scaffolds on osteogenic differentiation of stem cells from human exfoliated deciduous teeth

The aim of this study was to investigate the effect of surface modification of a polycaprolactone scaffold on promoting osteogenic differentiation of stem cells from human exfoliated deciduous teeth. Four different polycaprolactone scaffold were evaluated: untreated; coated with hyaluronic acid; coated with gelatin; and coated with hyaluronic acid and then with gelatin. The resulting scaffolds were characterized using scanning electron microscopy and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR). Human stem cells were cultured on the modified scaffolds placed in osteogenic differentiation medium. During culture, the osteogenic potential of the stem cells was examined by evaluating alkaline phosphatase activity and staining intensity, expression of osteoblastic-specific genes, and matrix mineralization. Scanning electron microscopy and ATR-FTIR confirmed productive biomacromolecular surface treatment of the polycaprolactone scaffold. All scaffolds permitted differentiation of stem cells into osteoblastic cells, but the gelatin-coated polycaprolactone scaffold facilitated osteogenesis of a larger number of stem cells than the untreated and the hyaluronic acid-coated scaffolds. We demonstrate that gelatin is an appropriate macromolecule for modifying the surface of an electrospun polycaprolactone fibre scaffold that is used subsequently in bone tissue engineering applications.

Optimization of poly (lactic-co-glycolic acid)-bioactive glass composite scaffold for bone tissue engineering using stem cells from human exfoliated deciduous teeth

OBJECTIVE

The aim of this study was to develop a composite scaffold with the optimal poly(lactic-co-glycolic acid) (PLGA) and bioactive glass proportions to provide an environment for bone tissue regeneration and repair.

DESIGN

PLGA-bioactive glass composite scaffolds were prepared using a salt-leaching technique with different percentages of bioactive glass (0%, 10 %, and 15 % [w/w]) with PLGA. The resulting scaffolds were characterized using scanning electron microscopy and energy dispersive X-ray spectroscopy (SEM-EDS), and water contact angle, dynamic mechanical, and pH analysis. The scaffold biocompatibility was investigated using stem cells from human exfoliated deciduous teeth (SHED) and rat experiments.

RESULTS

SEM-EDS confirmed the successful fabrication of three-dimensional PLGA-bioactive glass scaffolds. The results showed that 10 % bioactive glass with PLGA exhibited favorable properties including increased pore size, hydrophilicity, and mechanical properties. The growth medium pH was increased for scaffolds containing bioactive glass. All scaffolds were biocompatible, and 10 % bioactive glass composite scaffolding showed better attachment, growth, and proliferation of SHED compared to the other scaffolds. Moreover, it enhanced osteogenic differentiation of SHED in vitro and in vivo.

CONCLUSIONS

Salt-leaching-derived PLGA-bioactive glass composite scaffolds were successfully established. PLGA with 10 % bioactive glass had adequate physical properties and bioactivity, and it could be considered as a composite for bone tissue engineering applications.

Optimal Xeno-free Culture Condition for Clinical Grade Stem Cells from Human Exfoliated Deciduous Teeth

Background and Objectives

Stem cells from human exfoliated deciduous teeth (SHED) are a promising clinical resource for various tissue defects, including lumbar spondylosis, neural compression, and cleft palate. Use of media containing animal-derived serum carries potential risk of infectious diseases and unwanted immunogenicity. To increase the potential utility of SHED for clinical application, SHED was adapted to xeno-free conditions.

Methods

Define xeno-free culture media were compared with the conventional serum containing media in the culture of SHED. Cultured SHED in different media were further characterized through proliferative capacities, cellular phenotype, and differentiation potential.

Results

Selected xeno-free media were capable of supporting the growth of SHED. MSCGM-CD Bulletkit medium greatly increased the number and proliferate capacity of colony-forming unit-fibroblast than SHED cultured in other media. In addition, the characteristic surface markers expression and multipotent differentiation potential of SHED in the MSCGM-CD Bulletkit medium were comparable to those observed with serum-containing medium.

Conclusions

The xeno-free medium described herein has the potential to be further used for the safe expansion and to determine efficient way to produce clinical grade dental stem cells for therapeutic applications.

Dental arch changes in postretention in Class II division 1 extraction cases

OBJECTIVE

The purpose of this study is to evaluate the postretention stability of the dental arches in Class II division 1 patients treated with four bicuspid extractions and the edgewise technique.

MATERIALS AND METHODS

A digital caliper was used to analyze the dental casts from 29 Class II division 1 malocclusion patients with skeletal type II (14 males, 15 females; ages ranging from 10.2-18.0 years), treated with four bicuspid extractions and the edgewise technique. Intercanine width, intermolar width, arch length, irregularity index, overjet and overbite were evaluated at three times: pretreatment (T1), posttreatment (T2) and postretention (T3) (mean: 4.15 years). Student's t-tests were used to compare the pretreatment-posttreatment, posttreatment-postretention and pretreatment-postretention. Significance was determined at P<0.05.

RESULTS

The results of the study are listed as: (1) The upper and lower intercanine widths significantly increased (P<0.05) between T1-T2 and decreased between T2-T3. However, no significant changes were observed between T1-T3; (2) The upper and lower intermolar widths significantly decreased (P<0.05) between T1-T2, between T2-T3 and between T1-T3, except for the upper intermolar width between T2-T3 which showed no significant change; (3) The upper and lower arch lengths significantly decreased (P<0.05) at posttreatment and postretention due to the closure of extraction spaces. Both the upper and lower arch lengths significantly decreased between T1-T2, T2-T3, and T1-T3, except for the upper arch length between T2-T3, which showed no significant change; (4) The irregularity index was significantly improved after treatment. However, there was a slight increase in incisor irregularity at postretention. At postretention, 75.86% of the patients had mild crowding, 20.68% had moderate crowding, 3.48% had severe crowding; (5) The overjet and overbite significantly decreased (P<0.05) between T1-T2 and increased between T2-T3.

CONCLUSION

The changes in the dental arches were small at postretention with a tendency to return towards their original position. The overall stability of Class II division 1 extraction cases is relatively good.

Comparison of friction forces between stainless orthodontic steel brackets and TiNi wires in wet and dry conditions

In sliding mechanics, frictional force is an important counter-balancing element to orthodontic tooth movement, which must be controlled in order to allow application of light continuous forces. The purpose of this study was to compare the frictional forces between a stainless steel bracket and five different wire alloys under dry and wet (artificial saliva) conditions. TiNi, TiNiCu, TiNiCo, commercial wires A and commercial wires B with equal dimensions of 0.016×0.022'' were tested in this experiment. The stainless steel bracket was chosen with a slot dimension of 0.022''. Micro-hardness of the wires was measured by the Vickers micro-hardness test. Surface topography of wires was measured by an optical microscope and quantified using surface roughness testing. Static and kinetic friction forces were measured using a custom-designed apparatus, with a 3-mm stretch of wire alloy at a crosshead speed of 1mm/min. The static and dynamic frictions in the wet condition tended to decrease more slowly than those in the dry condition. Therefore, the friction of TiNiCu and commercial wires B would increase. Moreover, these results were associated with scarred surfaces, i.e. the increase in friction would result in a larger bracket microfracture. From the results, it is seen that copper addition resulted in an increase in friction under both wet and dry conditions. However, the friction in the wet condition was less than that in dry condition due to the lubricating effect of artificial saliva.

Improvement of mechanical and biological properties of TiNi alloys by addition of Cu and Co to orthodontic archwires

The purpose of this study was to investigate improved performances of TiNi in order to promote tooth movement. Special attention was paid to the effect on the clinical properties of TiNi of adding Cu and Co to this alloy. Ti49.4Ni50.6, Ti49Ni46Cu5 and Ti50Ni47Co3 (at %) alloys were prepared. Specimens were cold-rolled at 30% reduction and heat-treated at 400°C for 60min. Then, the test results were compared with two types of commercial archwires. The findings showed that superelasticity properties were confirmed in the manufactured commercial alloys at mouth temperature. The difference of stress plateau in TiNi, TiNiCo and commercial wires B at 25°C changed significantly at various testing temperatures due to the combination of martensite and austenite phases. At certain temperatures the alloys exhibited zero recovery stress at 2% strain and consequently produced zero activation force for moving teeth. The corrosion test showed that the addition of Cu and Co to TiNi alloys generates an increase in corrosion potential (Ecorr) and corrosion current densities (Icorr). Finally, we observed that addition of Cu and Co improved cell viability. We conclude that addition of an appropriate amount of a third alloying element can help enhance the performances of TiNi orthodontic archwires.

Antimicrobial effects of silver zeolite, silver zirconium phosphate silicate and silver zirconium phosphate against oral microorganisms

OBJECTIVE

To evaluate the antimicrobial activities of silver inorganic materials, including silver zeolite (AgZ), silver zirconium phosphate silicate (AgZrPSi) and silver zirconium phosphate (AgZrP), against oral microorganisms. In line with this objective, the morphology and structure of each type of silver based powders were also investigated.

METHODS

The antimicrobial activities of AgZ, AgZrPSi and AgZrP were tested against Streptococcus mutans, Lactobacillus casei, Candida albicans and Staphylococcus aureus using disk diffusion assay as a screening test. The minimum inhibitory concentration (MIC) and minimum lethal concentration (MLC) were determined using the modified membrane method. Scanning electron microscope and X-ray diffraction were used to investigate the morphology and structure of these silver materials.

RESULTS

All forms of silver inorganic materials could inhibit the growth of all test microorganisms. The MIC of AgZ, AgZrPSi and AgZrP was 10.0 g/L whereas MLC ranged between 10.0-60.0 g/L. In terms of morphology and structure, AgZrPSi and AgZrP had smaller sized particles (1.5-3.0 µm) and more uniformly shaped than AgZ.

CONCLUSIONS

Silver inorganic materials in the form of AgZ, AgZrPSi and AgZrP had antimicrobial effects against all test oral microorganisms and those activities may be influenced by the crystal structure of carriers. These results suggest that these silver materials may be useful metals applied to oral hygiene products to provide antimicrobial activity against oral infection.

Plaque pH response to snack foods in children with different levels of mutans streptococci

This study aimed to investigate the effects of some snack foods on plaque pH in children with different levels of mutans streptococci (MS). Six children, aged 9-12 years, with low (<10(4)) and 6 children, aged 10-12 years, with high (>106) numbers of MS/ml saliva participated in the study. Dental plaque pH changes, after the consumption of milk chocolate, sweet biscuit, instant noodle, sticky rice with banana and a 10% sucrose positive control were measured using pH-electrode. The measurements of plaque pH were made on forty-eight-hour accumulated plaque, at baseline to determine the resting pH of the fasted plaque and at time intervals of 2, 5, 10, 20 and 30 minutes after food consumption. The plaque pH curves, delta pH values and area under curve for pH 6.0 for each test food were determined. Plaque acidogenicity was more pronounced for the high-MS group at almost all test periods compared to the low-MS group with all test foods. The test foods were ranked according to maximum pH drop in about the same order in both groups as follows: 10% sucrose > milk chocolate > sweet biscuit > sticky rice with banana > instant noodle. The plaque pH also stayed below pH 6.00 for a longer period in the high-MS group with sweet biscuit, milk chocolate, and sticky rice with banana. Findings suggest that pH responses were more acidic in high-MS group than low-MS group.

Antimicrobial activity of Cratoxylum formosum on Streptococcus mutans

The gum of Cratoxylum formosum, commonly known as mempat, is a natural agent that has been used extensively for caries prevention by hill tribe people residing in Thailand. The objective of this study was to investigate the antimicrobial activity of Cratoxylum formosum gum on Streptococcus mutans (S. mutans) in vitro. The gum extracted from stem bark of Cratoxylum formosum was investigated for antimicrobial activity against different strains of S. mutans, including S. mutans KPSK2 and 2 clinical isolates. Inhibition of growth was primarily tested by agar diffusion method. A two-fold broth dilution method was then used to determine the minimum inhibitory concentration (MIC) of the extract. The extract of Cratoxylum formosum was effective against S. mutans with the inhibition zones ranging from 9.5 to 11.5 mm and MIC values between 48 microg/ml and 97 microg/ml. The gum of Cratoxylum formosum has high antimicrobial activity against S. mutans and may become a promising herbal varnish against caries.

Relationships between dental calcification stages and skeletal maturity indicators in Thai individuals

The purpose of this study was to investigate the relationship between the stages of calcification of various teeth and skeletal maturity stages among Thai individuals. The study subjects consisted 139 male subjects and 222 female subjects ranging in age from 7 years to 19 years. A total of 361 hand-wrist and panoramic radiographs were obtained and analyzed. The tooth development of the mandibular canines, first and second premolars, and second and third molars were assessed according to the Demirjian's system. Skeletal age and skeletal maturity stages were determined from hand-wrist radiographs by using the method outlined in the atlas of Greulich and Pyle and the Fishman's system, respectively. The Spearman rank order correlation coefficient revealed significant relationships (r = 0.31-0.69, P < .01) between dental calcification stages and skeletal maturity stages. The second premolar was the tooth showing the highest correlation (r = 0.66 in male subjects, r = 0.69 female subjects). The third molar demonstrated the poorest correlation (r = 0.47 in male subjects, r = 0.31 in female subjects). The canine stage F for both sexes (63.2% for female subjects, 54.1% for male subjects) coincided with the MP3 stage. The second molar stage E for female subjects (51.4%) and stage G for male subjects (66.7%) were related to the S stage and the MP(3cap) stage, respectively. This suggests that tooth calcification stages from panoramic radiographs might be clinically useful as a maturity indicator of the pubertal growth period. However, further study is recommended in a larger sample size, and future studies should address development of the canines and second molars.

[Congenital absence and loss of teeth in an orthodontic patient group]

Panoramic radiographs of 1,160 orthodontic patients, 655 females and 505 males, 6-15 years of age were selected for study in congenital absence, loss of permanent teeth and premature loss of deciduous teeth. The result from this investigation showed congenital absence for 100 subjects (8.6%, not including third molars) and 185 subjects (16%, third molars included). The permanent upper lateral incisors are most frequently missing (22.4%, third molars excluded), followed by upper second premolar, 17.8%, lower second premolar, 15.1%, and then lower lateral incisor, 12.5%. The study also showed loss of permanent teeth of 105 subjects (9.1%). The lower first molars are most frequently lost (52.8%), followed by the upper first molar (18.2%). There is no statistical significance (alpha = 0.01) between females and males in both congenital absence and loss of permanent teeth. The premature loss of deciduous teeth was found in 467 subjects (40.3%). The most frequently loss happened to second deciduous molars, followed by first deciduous molars and then deciduous canines. There is more statistical significance (alpha = 0.01) in females than in males.

Accuracy of Moyers' probability chart in a group of Thai subjects

The objective of this study is to investigate the accuracy of Moyers' probability chart in predicting canine and premolar sizes from the sum of lower incisors in a group of Thai subjects. The fifty models of orthodontic patient, Faculty of dentistry, Mahidol University with no loss of tooth material mesio-distally, fully erupted permanent teeth, no mesial or distal restoration and normal tooth morphology were selected. The results of this study show that the under-estimation less than or equal to 2 mm. is 32 casts on upper (64%) and 28 casts on lower (56%) and the over estimation greater than 2 mm. is 16 casts on upper (32%) and 18 casts on lower (36%). In comparison of 14 models which have the same value of sum of lower incisors, there is a significant (alpha = 0.05) difference between the combined canine and premolar size of this study and Moyers' probability chart.

[The assessment of nasopharyngeal airway space]

In children, the nasopharyngeal airway space is provided by the size of adenoid tissue on the posterior nasopharyngeal wall and the size of nasopharynx. This airway space will be changed by the age. The objective of this study is for evaluating this airway space at the age group 7-8 years, 9-10 years, 11-12 years, 13-14 years and 15-16 years from the cephalograms by assessing is the form of adenoidal-nasopharyngeal ratio. Two hundred subjects (97 boys, 103 girls) were selected without histories of mouth breathing, or adenoidectomy or previous orthodontic treatment and cephalometrically, they are shown normal inclination of the maxilla and the mandible to cranial base, normal facial index and no anterior open-bite. They were divided into 40 subjects on each age group. From the study, the adenoidal-nasopharyngeal ratio were found 0.557, 0.487, 0.512, 0.470 and 0.415 at the age 7-8 years, 9-10 years, 11-12 years, 13-14 years and 15-16 years respectively.