Antimony leaching and chemical species analyses in an industrial solid waste: Surface and bulk speciation using ToF-SIMS and XANES

The surface chemistry and bulk chemical speciation of solid industrial wastes containing 8wt-% antimony (Sb) were investigated using synchrotron X-ray Absorption Near Edge Structure (XANES) and Time-of-Flight Ion Secondary Mass Spectrometry (ToF-SIMS). Leaching experiments were conducted in order to better understand the behavior of Sb in waste streams and to inform regulatory management of antimony-containing wastes. The experiments also demonstrate how a combination of XANES and ToF-SIMS adds value to the field of waste investigations. Leaching treatments (acid and base) were performed at a synchrotron over 24h time periods. Surface analyses of the wastes before leaching showed the presence of Sb associated with S and O. Bulk analyses revealed Sb to be present, primarily, as trivalent sulfide species. Both acid and base leaching did not change the antimony speciation on the solid. Leaching transferred about 1% of the total Sb into solution where Sb was found to be present as Sb(V). XANES data showed similarities between leachate and FeSbO₄. During base leaching, the Sb content in solution gradually increased over time, and potential desorption mechanisms are discussed.

Effects of copper fungicide residues on the microbial function of vineyard soils

The use of copper-based fungicides leads to an accumulation of copper (Cu) in vineyard soils, potentially causing adverse effects to the microbial function and fertility of the soil. This study used a soil microcosm approach to assess the effects of Cu accumulation on microbial function in vineyard soils. Surface soil samples were collected from 10 vineyards and a number of un-impacted reference sites in each of three different viticultural regions of Australia. The field-collected soils were transferred to microcosms and maintained for up to 93 days in the laboratory at 20-22 °C and 60 % of their maximum water-holding capacity. The microbial function of the soils was indicated by measuring phosphomonoesterase, arylsulfatase, urease, and phenol oxidase activities. In general, the vineyard soils had greater concentrations of Cu and lower enzyme activities than in the reference soils, although a weak negative relationship between Cu and enzyme activity could only be found for phosphomonoesterase activity. The results show that soil physical-chemical properties (i.e., organic carbon, pH) are greater determinants of soil enzyme activity than increased soil Cu concentration at the Cu concentrations present in vineyard soils.

Environmental fate of fungicides in surface waters of a horticultural-production catchment in southeastern Australia

Fungicides are regularly applied in horticultural production systems and may migrate off-site, potentially posing an ecological risk to surface waterways. However, few studies have investigated the fate of fungicides in horticultural catchments. This study investigated the presence of 24 fungicides at 18 sites during a 5-month period within a horticultural catchment in southeastern Australia. Seventeen of the 24 fungicides were detected in the waterways, with fungicides detected in 63% of spot water samples, 44% of surface sediment samples, and 44% of the passive sampler systems deployed. One third of the water samples contained residues of two or more fungicides. Myclobutanil, trifloxystrobin, pyrimethanil, difenoconazole, and metalaxyl were the fungicides most frequently detected, being present in 16-38% of the spot water samples. Iprodione, myclobutanil, pyrimethanil, cyproconazole, trifloxystrobin, and fenarimol were found at the highest concentrations in the water samples (> 0.2 μg/l). Relatively high concentrations of myclobutanil and pyrimethanil (≥ 120 μg/kg dry weight) were detected in the sediment samples. Generally the concentrations of the fungicides detected were several orders of magnitude lower than reported ecotoxicological effect values, suggesting that concentrations of individual fungicides in the catchment were unlikely to pose an ecological risk. However, there is little information on the effects of fungicides, especially fungi and microbes, on aquatic ecosystems. There is also little known about the combined effects of simultaneous low-level exposure of multiple fungicides to aquatic organisms. Further research is required to adequately assess the risk of fungicides in aquatic environments.

Evaluation of soil metal bioavailability estimates using two plant species (L. perenne and T. aestivum) grown in a range of agricultural soils treated with biosolids and metal salts

Few studies have quantified the accuracy of soil metal bioavailability assays using large datasets. A meta-analysis from experiments spanning 6 months to 13 years on 12 soil types, compared bioavailability estimate efficiencies for wheat and ryegrass. Treatments included biosolids ± metals, comparing total metal, Ca(NO₃)₂, EDTA, soil solution, DGT and free ion activity. The best correlations between soil metal bioavailability and shoot concentrations were for Ni using Ca(NO₃)₂ (r² = 0.72) which also provided the best estimate of Zn bioavailability (r² = 0.64). DGT provided the best estimate of Cd bioavailability, accounting for 49% of shoot Cd concentrations. There was no reliable descriptor of Cu bioavailability, with less than 35% of shoot Cu concentrations defined. Thus interpretation of data obtained from many soil metal bioavailability assays is unreliable and probably flawed, and there is little justification to look beyond Ca(NO₃)₂ for Ni and Zn, and DGT for Cd.

Inter-regional variability in environmental availability of fungicide derived copper in vineyard soils: an Australian case study

This study determined the environmental availability of copper (Cu) in Australian vineyard soils contaminated with fungicide derived Cu residues, and investigated the soil characteristics correlated with differences in Cu availability between regions. Concentrations of 0.01 M calcium chloride extractable Cu, measured in surface soils collected from 98 vineyards in 10 different grape-growing regions of Australia, ranged from <0.1 to 0.94 mg/kg and accounted for 0.10-1.03% of the total Cu concentrations in the soils. Differences in the calcium chloride extractable Cu concentrations were related to the total Cu concentration and soil properties, including pH, clay, exchangeable K, silt, and calcium carbonate. The information generated from this study may prove useful in devising strategies to reduce the availability and toxicity of Cu in agricultural soils.

Probing the effects of light and temperature on diurnal rhythms of phytosiderophore release in wheat

* The existing literature is ambiguous as to whether the diurnal pulse in phytosiderophore (PS) release in the Poaceae is mediated by light or temperature, or both. * Here, wheat (Triticum aestivum cv. Yecora Rojo) seedlings were grown in Fe-sufficient (pFe = 16.5) and Fe-deficient (pFe = 17.8) chelator-buffered nutrient solutions. Six different light/temperature regimes were tested over 8 d in paired growth chambers. * Phytosiderophore release patterns under a square-wave light regime were similar, irrespective of whether temperature was varied diurnally or held constant, but PS release was negligible when the light was removed. Release patterns of PS for Fe-deficient and Fe-sufficient plants grown under the square-wave vs ramped light and temperature regimes were similar in the corresponding Fe treatments. * Our results strongly support the notion that the diurnal pulse in PS release in the Poaceae is mainly mediated by changes in light rather than temperature. Our comparison of square-wave with more natural ramped light/temperature regimes suggests that the diurnal response patterns of PS release in wheat can be confidently studied using traditional square-wave regimes, and this is likely to be the case with other Poaceae as well.