Optimized 3D printed zirconia-reinforced leucite with antibacterial coating for dental applications

OBJECTIVES

This study aims to produce by robocasting leucite/zirconia pieces with suitable mechanical and tribological performance, convenient aesthetics, and antibacterial properties to be used in dental crown replacement.

METHODS

Leucite pastes reinforced with 12.5%, 25%, and 37.5% wt. ZrO2 nanoparticles were prepared and used to print samples that after sintering were characterized in terms of density, shrinkage, morphology, porosity, mechanical and tribological properties and translucency. A coating of silver diamine fluoride (SDF) and potassium iodide (KI) was applied over the most promising material. The material's antibacterial activity and cytotoxicity were assessed.

RESULTS

It was found that the increase of ZrO2 reinforcement up to 25% enhanced both microhardness and fracture toughness of the sintered composite. However, for a superior content of ZrO2, the increase of the porosity negatively affected the mechanical behaviour of the composite. Moreover, the composite with 25% ZrO2 exhibited neglectable wear in chewing simulator tests and induced the lowest wear on the antagonist dental cusps. Although this composite exhibited lower translucency than human teeth, it was three times higher than the ZrO2 glazed material. Coating this composite material with SDF+KI conferred antibacterial properties without inducing cytotoxicity.

SIGNIFICANCE

Robocasting of leucite reinforced with 25% ZrO2 led to best results. The obtained material revealed superior optical properties and tribomechanical behaviour compared to glazed ZrO2 (that is a common option in dental practice). Moreover, the application of SDF+KI coating impaired S. aureus proliferation, which anticipates its potential benefit for preventing pathogenic bacterial complications associated with prosthetic crown placement.

Mild periconceptional hyperglycemia: predictor of adverse fetomaternal outcomes in gestational diabetes?

AIM

To clarify whether mild first trimester hyperglycaemia (characteristic of early-onset GDM) is associated with higher incidence of congenital malformations and other adverse fetomaternal outcomes compared to women with second trimester hyperglycaemia (later-onset GDM).

DESIGN AND METHODS

We analyzed the Portuguese National GDM database, containing data collected between 2011 and 2017. Two study groups were defined: Group 1-Women with GDM diagnosed during the first trimester (with fasting glycemia ≥ 92 and < 126 mg/dL); Group 2-Women with GDM diagnosed after the first 12 weeks of gestation, with either fasting glycemia or oral glucose tolerance test, according to the International Association of Pregnancy and Diabetes Study Group criteria. The fetomaternal characteristics of each group were compared.

RESULTS

A total of 18.518 pregnant women diagnosed with GDM were included which 34.4% of them belonged to Group 1. Pregnant women from this group were significantly younger and had a higher median BMI than the women from the other group. Overall, there was no significant differences in maternal morbidity parameters between groups. Non-evolutive pregnancies were significantly more frequent along the present gestation in the group 1 (1.1% vs. 0.1%, p < 0.001), as was fetal death (0.6% vs. 0.2%, p < 0.001). Congenital malformations did not differ significantly between groups (3.2% vs. 2.8%, p = 0.155).

CONCLUSIONS

The mild near conceptional hyperglycaemic state characteristic of an early-onset GDM seems to be associated with an increased prevalence of non-evolutive pregnancies and foetal deaths when compared to later-onset GDM.

The MAPKinase Signaling and the Stimulatory Protein-1 (Sp1) Transcription Factor Are Involved in the Phototherapy Effect on Cytokines Secretion from Human Bronchial Epithelial Cells Stimulated with Cigarette Smoke Extract

The present study was aimed to investigate the phototherapy effect with low-level laser on human bronchial epithelial cells activated by cigarette smoke extract (CSE). Phototherapy has been reported to actuate positively for controlling the generation/release of anti-inflammatory and pro-inflammatory mediators from different cellular type activated by distinct stimuli. It is not known whether the IL-8 and IL-10 release from CSE-stimulated human bronchial epithelium (BEAS) cells can be influenced by phototherapy. Human bronchial epithelial cell (BEAS) line was cultured in a medium with CSE and irradiated (660 nm) at 9 J. Apoptosis index was standardized with Annexin V and the cellular viability was evaluated by MTT. IL-8, IL-10, cAMP, and NF-κB were measured by ELISA as well as the Sp1, JNK, ERK1/2, and p38MAPK. Phototherapy effect was studied in the presence of mithramycin or the inhibitors of JNK or ERK. The IL-8, cAMP, NF-κB, JNK, p38, and ERK1/2 were downregulated by phototherapy. Both the JNK and the ERK inhibitors potentiated the phototherapy effect on IL-8 as well as on cAMP secretion from BEAS. On the contrary, IL-10 and Sp1 were upregulated by phototherapy. The mithramycin blocked the phototherapy effect on IL-10. The results suggest that phototherapy has a dual effect on BEAS cells because it downregulates the IL-8 secretion by interfering with CSE-mediated signaling pathways, and oppositely upregulates the IL-10 secretion through of Sp1 transcription factor. The manuscript provides evidence that the phototherapy can interfere with MAPK signaling via cAMP in order to attenuate the IL-8 secretion from CSE-stimulated BEAS. In addition, the present study showed that phototherapy effect is driven to downregulation of the both the IL-8 and the ROS secretion and at the same time the upregulation of IL-10 secretion. Besides it, the increase of Sp-1 transcription factor was crucial for laser effect in upregulating the IL-10 secretion. The dexamethasone corticoid produces a significant inhibitory effect on IL-8 as well as ROS secretion, but on the other hand, the corticoid blocked the IL-10 secretion. Taking it into consideration, it is reasonable to suggest that the beneficial effect of laser therapy on lung diseases involves its action on unbalance between pro-inflammatory and anti-inflammatory mediators secreted by human bronchial epithelial cells through different signaling pathway.

Simulation of huntington’s disease in forensic psychiatry: Case report

Introduction

Huntington Disease (HD) is an autosomal-dominant, neurodegenerative disorder, with a progressive course, that typically involves a triad of cognitive, motor and psychiatric disorders. Its pathogenic mechanisms are not fully understood, although a faultily encoded version of the protein huntingtin—resulting from a cytosine-adenine-guanine (CAG) trinucleotide expansion in the HTT gene—has been shown to cause intracellular toxicity in neural tissue. Patients usually presents with prodromic psychiatric perturbances, such as depression, delusions or personality changes. Occasionally HD gives rise to criminal behavior.

Objectives

To understand HD clinical presentation and underlines the differencial diagnosis. We present a case of a 31-year-old male offender, whose mother was diagnosed with HD, and during his forensic-psychiatric evaluation, HD was considered, but not confirmed.

Methods

Case report.

Results

A 31-year-old male offender was under a forensic-psychiatric evaluation due to a crime of domestic violence, after he discovers that his wife had an affair. He reports previous personality changes and depression, and compares himself with his mother, stating she was diagnosed with HD due to psychiatric prodromic disturbances. He shows concern about having a disease, and was waiting for genetic test result. After a clinical evaluation, and despite a family history of HD and genetic suspicion, it was important to consider differential diagnosis. The case refers to a passionate crime, which attempted to simulate a HD, considering his genetic background.

Conclusions

Psychometrically identifiable features in HD appear to be important in the context of analyzing circumstances occasioning criminal acts, but the medical history is the most important part of the examination.

Disclosure

No significant relationships.

Integrated efforts to promote mental health care during the SARS-CoV-2 pandemic: Reflecting on the experience of a university helpline

Introduction

The SARS-CoV-2 pandemic is affecting numerous dimensions of our society since the beginning of the outbreak. A significant increase in emotional distress was expected in the general population, particularly among the high-risk groups such as the oldest, chronic patients, healthcare professionals, and psychopathology vulnerable people. There was an urgent need to adapt and create solutions to promote mental health. Given the recommendations to minimize face-to-face interactions, several helplines were widely developed.

Objectives

In this work, we aim to reflect on the experience of a university helpline, that integrated efforts with the regional mental health care services.

Methods

A University helpline was created to give support to the regional community outside academia. The team was created on an online teamwork platform, to communicate through the chat, carry videoconference meetings, and store useful files. A Manchester screening decision tree was adopted, to define a set of guidelines to provide support to the callers, based mainly on the guidelines defined by the Order of Portuguese Psychologists. Liaison with the mental health care services, including other specific helplines, was established.

Results

Notwithstanding all the efforts, the number of received calls was scarce, similarly to helplines created by other national universities and by other entities.

Conclusions

A new approach to psychological intervention in crisis is needed, maintaining integrated efforts, and taking advantage of the opportunity to foster personalized mental health care in the digital era. It is important to continuously assess the value of integrated efforts in patient care and to the healthcare system.

Tribological performance of the pair human teeth vs 3D printed zirconia: An in vitro chewing simulation study

This study aims to evaluate the tribological performance of the pair human teeth/robocasted zirconia, with a special focus on the enamel wear mechanisms. Zirconia pieces produced by robocasting (RC) and unidirectional compression (UC) were compared in terms of crystalline structure, density, porosity, hardness and toughness. Chewing simulation tests were performed against human dental cusps. The cusps wear was quantified and the wear mechanisms identified. Although most of the properties of UC and RC samples are similar, differences were observed for surface roughness and porosity. Although the samples did not suffer wear, the antagonist cusps worn in a similar way. In conclusion, robocasting seems a promising technique to produce customized zirconia dental pieces, namely in what concerns the overall tribological behaviour.

Suitability of 3D printed pieces of nanocrystalline zirconia for dental applications

OBJECTIVES

The main goal of this work is to evaluate the suitability of nanostructured zirconia pieces obtained by robocasting additive manufacturing (AM), for dental applications.

METHODS

The density, crystalline structure, morphology/porosity, surface roughness, hardness, toughness, wettability and biocompatibility of the produced samples were compared with those of samples obtained by conventional subtractive manufacturing (SM) of a similar commercial zirconia material. Chewing simulation studies were carried out against dental human cusps in artificial saliva. The wear of the material was quantified and the wear mechanisms investigated, as well as the influence of glaze coating.

RESULTS

AM samples, that revealed to be biocompatible, are slightly less dense and more porous than SM samples, showing lower hardness, toughness and wettability than SM samples. After chewing tests, no wear was found both on AM and SM samples. However, the dental wear was significantly lower when AM samples were used as counterbody. Concerning the glazed samples, both coated surfaces and dental cusps suffered wear, being the cusps' wear higher than that found for unglazed samples. More, cusps tested against AM coated samples suffered less wear comparatively to those opposed to SM coated samples.

SIGNIFICANCE

Overall, the results presented in this paper show that AM processed nanostructured zirconia can be used in dental restorations, with important advantages from the point of view of processing and tribological performance. Moreover, the option for glaze finishing should be carefully considered both in SM and AM processed specimens.

Caracterização microbiológica, físico-química e das condições de produção e comercialização da carne de sol de Salinas, Minas Gerais

RESUMO Para avaliar as condições higiênico-sanitárias e tecnológicas (HST) de produção e comercialização da carne de sol no município de Salinas, na região Norte do estado de Minas Gerais, foram coletadas 40 amostras no comércio local para a realização de análises físico-químicas e microbiológicas. A carne de sol é produzida artesanalmente em estabelecimentos comerciais e considerada uma tradição da região. Nas análises físico-químicas de umidade, proteína, gordura, cinzas, cloretos e pH, foram encontrados valores médios de 70,13%, 22,35%, 2,25%, 5,09%, 3,63% e 5,8, respectivamente. Duas amostras (5%) foram positivas para Salmonella spp. e 16 (40%) apresentaram contagens de S. aureus superiores a 103UFC/g. Os valores encontrados nas análises de mesófilos aeróbicos, bolores e leveduras e coliformes totais e termotolerantes foram de 2,50x107 UFC/g, 1,73x104 UFC/g, 9,1NMP/g e 4,3NMP/g, respectivamente. A carne de sol produzida em Salinas é um produto artesanal, portanto heterogêneo quanto às características de produção, comercialização e de qualidade microbiológica e físico-química. A importância socioeconômica da carne de sol na região é considerável, o que justifica a necessidade de se conhecer melhor suas características para auxiliar no desenvolvimento de eventuais políticas públicas regionais visando ao controle sanitário desse produto.

Health literacy and physical activity as buffers to counter act work related stress

Background

Stress health problems affect 47.8% of the work force in Portugal. It is predicted that, in the next decade, these problems will overcome musculoskeletal disorders, the first cause of employee’s withdrawal from work. Research indicates connections between stress and dimensions of the work place (like job satisfaction). Nevertheless the conceptual understanding of these relationships is sparse. In order to better understand these relationships, this research focus on the use of job–specific models of stress, associating them with health literacy (HL) - in the context of the European Health Literacy Survey framework (HLS-EU) - and physical exercise.

Methods

A total of 748 participants from the different offices of a company in the financial sector (Portugal, main land and autonomous territories) participated in a cross sectional survey (CAWI). Age ranged from 25 to 65 years and HL was measured using the HLS-EU instrument validated to Portuguese (HLS-EU-PT). Each participant was allocated to one of the groups, either of satisfactory HL (when scores ≥30) or insufficient HL (when scores &lt;30).

Results

Out of the 748 participants (58.7% males, average age of 39 years), 80.4% sometimes and very often experience stress and tension in the workplace. Less than one in every two (44.4%) practice physical activity several times a week. Of the participants, 7.1% have inadequate, 39.0% problematic, 36.6% sufficient and 17.3% excellent HL (HLS-EU-PT). Employees that are more active are those who experience lower levels of stress.

Conclusions

The research of the effects of HL combined with physical exercise, as buffer variables to problems related to the effects of work stress, is a new area of research that may help understand patterns of adherence to activities that can help workers deal with everyday working conditions. More research is needed to integrate HL strategies in the work place.

Key messages

Stress health problems affect 47.8% of the work force in Portugal. Employees that are more active are those who experience lower levels of stress.

Synthesis of thermoelectric magnesium-silicide pastes for 3D printing, electrospinning and low-pressure spray

In this work, eco-friendly magnesium-silicide (Mg₂Si) semiconducting (n-type) thermoelectric pastes for building components concerning energy-harvesting devices through 3D printing, spray and electrospinning were synthetized and tested for the first time. The Mg₂Si fine powders were obtained through the combination of ball milling and thermal annealing under Ar atmosphere. While the latter process was crucial for obtaining the desired Mg₂Si phase, the ball milling was indispensable for homogenizing and reducing the grain size of the powders. The synthetized Mg₂Si powders exhibited a large Seebeck coefficient of ~ 487 µV/K and were blended with a polymeric solution in different mass ratios to adjust the paste viscosity to the different requirements of 3D printing, electrospinning and low-pressure spray. The materials produced in every single stage of the paste synthesis were characterized by a variety of techniques that unequivocally prove their viability for producing thermoelectric parts and components. These can certainly trigger further research and development in green thermoelectric generators (TEGs) capable of adopting any form or shape with enhanced thermoelectric properties. These green TEGs are meant to compete with common toxic materials such as Bi₂Te₃, PbTe and CoSb that have Seebeck coefficients in the range of ~ 290-700 μV/K, similar to that of the produced Mg₂Si powders and lower than that of 3D printed bulk Mg₂Si pieces, measured to be ~ 4866 μV/K. Also, their measured thermal conductivities proved to be significantly lower (~ 0.2 W/mK) than that reported for Mg₂Si (≥ 4 W/mK). However, it is herein demonstrated that such thermoelectric properties are not stable over time. Pressureless sintering proved to be indispensable, but difficultly achievable by long thermal annealing (even above 32 h) in inert atmosphere at 400 °C, at least for bulk Mg₂Si pieces constituted by a mean grain size of 2-3 μm. Hence, for overcoming this sintering challenge and become the silicide's extrusion viable in the production of bulk thermoelectric parts, alternative pressureless sintering methods will have to be further explored.

Characterization of CCDC103 expression profiles: further insights in primary ciliary dyskinesia and in human reproduction

PROPOSE

To study CCDC103 expression profiles and understand how pathogenic variants in CCDC103 affect its expression profile at mRNA and protein level.

METHODS

To increase the knowledge about the CCDC103, we attempted genotype-phenotype correlations in two patients carrying novel homozygous (missense and frameshift) CCDC103 variants. Whole-exome sequencing, quantitative PCR, Western blot, electron microscopy, immunohistochemistry, immunocytochemistry, and immunogold labelling were performed to characterize CCDC103 expression profiles in reproductive and somatic cells.

RESULTS

Our data demonstrate that pathogenic variants in CCDC103 gene negatively affect gene and protein expression in both patients who presented absence of DA on their axonemes. Further, we firstly report that CCDC103 is expressed at different levels in reproductive tissues and somatic cells and described that CCDC103 protein forms oligomers with tissue-specific sizes, which suggests that CCDC103 possibly undergoes post-translational modifications. Moreover, we reported that CCDC103 was restricted to the midpiece of sperm and is present at the cytoplasm of the other cells.

CONCLUSIONS

Overall, our data support the CCDC103 involvement in PCD and suggest that CCDC103 may have different assemblies and roles in cilia and sperm flagella biology that are still unexplored.

1-Deoxysphingolipids

Sphingolipids (SLs) are fundamental components of eukaryotic cells. 1-Deoxysphingolipids differ structurally from canonical SLs as they lack the essential C1-OH group. Consequently, 1-deoxysphingolipids cannot be converted to complex sphingolipids and are not degraded over the canonical catabolic pathways. Pathologically elevated 1-deoxySLs are involved in several disease conditions. Within this review, we will provide an up-to-date overview on the metabolic, physiological and pathophysiological aspects of this enigmatic class of "headless" sphingolipids.

Reduction of Breast Cancer Treatment Delay as a Result of Efforts Carried Out by Two Brazilian NGOs

Background: Brazilian breast cancer patients present disease often at advanced stages (III, IV). Previous studies indicated that system delay is a causal factor of bad prognosis and increased mortality rate. In the state of Paraíba, northeast of Brazil, two non-governmental organizations (NGOs) Américas Amigas and Mulheres de Peito de Campina Grande (MLDP), promote faster access to treatment by donating diagnostic mammography and biopsies as well as anatomo-histopathological and immunohistochemical analysis. Aim: The current study aimed at evaluating the effectiveness of the assistance provided by both NGOs and comparing patient flow between HNL and FAP, two reference cancer centers in João Pessoa and Campina Grande, respectively. Methods: Time-to-treatment was analyzed for different time intervals between first medical consultation and initiation of treatment. Comparison was performed between three groups of patients: 40 patients from Hospital Napoleão Laureano (HNL) in João Pessoa; 80 patients from Fundação Assistencial da Paraíba (FAP) in Campina Grande and 15 patients from FAP, who received support from the NGOs. Kaplan-Meier analysis was performed to compare time-intervals among the groups. To estimate the impact of socioeconomic variables Cox regression analysis was performed. Results: Mean time-interval between first medical consultation and hospital admission was 135 (SD=21.0), 370 (SD=73.7) and 515 (SD=36.6) days, for patients of HNL, MLDP and FAP, respectively ( P = 0.0021). Time intervals analyzed for patients within the FAP hospital, between first medical consultation and hospital admission, tended to be shorter for patients who were assisted by the NGOs, compared with those who did not receive any assistance from the NGOs. Patients who had consulted specialized oncological health services beforehand had an increased chance (HZ=2.32; 95% CI: 1.17-4.60; P = 0.016) of being admitted at the reference hospital within 90 days after the first medical consultation, compared with those who had not consulted such specialized services. There were no significant differences between HNL and FAP, regarding the time interval between hospital admission and treatment initiation ( P = 0.21). Conclusion: The assistance to patients provided by the two NGOs, aimed at speeding up the diagnosis process, accelerated patient flow between first medical consultation and admission at the hospitals. Regarding HNL, patients from the inland had been sent by primary health units in their municipalities, directly to the cancer reference hospital in João Pessoa, without being referred to an in-between health service. Such procedure explains the variation of time intervals when admissions at FAP and HNL are compared. The results of the current study indicate that by providing faster breast cancer diagnosis, the NGOs’ mediation can significantly improve patient flow.

Lipocalin-2 regulates adult neurogenesis and contextual discriminative behaviours

In the adult mammalian brain, newborn granule cells are continuously integrated into hippocampal circuits, and the fine-tuning of this process is important for hippocampal function. Thus, the identification of factors that control adult neural stem cells (NSCs) maintenance, differentiation and integration is essential. Here we show that the deletion of the iron trafficking protein lipocalin-2 (LCN2) induces deficits in NSCs proliferation and commitment, with impact on the hippocampal-dependent contextual fear discriminative task. Mice deficient in LCN2 present an increase in the NSCs population, as a consequence of a G0/G1 cell cycle arrest induced by increased endogenous oxidative stress. Of notice, supplementation with the iron-chelating agent deferoxamine rescues NSCs oxidative stress, promotes cell cycle progression and improves contextual fear conditioning. LCN2 is, therefore, a novel key modulator of neurogenesis that, through iron, controls NSCs cell cycle progression and death, self-renewal, proliferation and differentiation and, ultimately, hippocampal function.

Cognitive impairment and magnetic resonance imaging correlates in primary progressive multiple sclerosis

OBJECTIVES

To characterize cognitive impairment in primary progressive multiple sclerosis (PPMS) and to correlate the pattern of cognitive deficits with brain magnetic resonance imaging (MRI) volumetric data.

MATERIALS AND METHODS

In a multicenter cross-sectional study, we recruited consecutive patients with PPMS as well as age, sex, and education level-matched healthy controls (HC). All participants underwent neuropsychological (NP) assessment, and brain MRI was performed in patients with PPMS for analysis of lesion load, subcortical GM volumes, and regional cortical volumes.

RESULTS

We recruited 55 patients with PPMS and 36 HC. Thirty-six patients were included in the MRI analysis. Patients with PPMS performed significantly worse than HC in all NP tests. Subcortical GM volume was significantly correlated with all NP tests, except for Stroop Test, with the largest effect for the thalamus (r=-.516 [BVMT-R DR, P=.016 FDR-corrected] to r=.664 [SDMT, P<.001 FDR-corrected]). In the stepwise linear regression model, thalamic volume was the only predictor of performance in all NP tests.

CONCLUSION

Cognitive impairment is common in PPMS and affects all evaluated cognitive domains. Subcortical GM volume, particularly of the thalamus, is a strong predictor of cognitive performance, suggesting it has a central role in the pathophysiology of PPMS-related cognitive dysfunction.

Neurovascular ultrasound in emergency settings: diagnostic and therapeutic aspects

INTRODUCTION

Neurovascular ultrasound is a non-invasive, portable and fast imaging method that, when performed by an experienced neurosonologist, offers reliable and reproducible information on the morphological and hemodynamic status of cervical and intracranial vessels.

AIM

To review the available evidence regarding the use of this tool in the approach to acute stroke.

DEVELOPMENT

Neurovascular ultrasound can be used in one of two ways: diagnostic and therapeutic. Considering the low recanalization rates of internal carotid artery and proximal medial cerebral artery occlusions with intravenous recombinant tissue plasminogen activator (r-tPA), neurovascular ultrasound used shortly in Emergency Department may help to select patients that could benefit from endovascular therapy. Moreover, ultrasound monitorization during intravenous r-tPA treatment allows the analysis of the pattern of arterial recanalization. Cervical ultrasound allows the assessment of the stenosis degree and the composition/surface of an arterial plaque that could, for instance, reveal earlier a candidate for carotid intervention. Finally, the therapeutic potential of ultrasound is also being investigated. Sonothrombolysis and sonolysis, that combine ultrasound technology with r-tPA and use exclusively the ultrasound to lyse the clot, respectively, showed promising results.

CONCLUSION

Neurovascular ultrasound has greatly expanded to assume an important role in the study of cerebrovascular disorders.

Depression across DSM and ICD editions: Psychiatric nosology's ‘Black Dog’

Introduction

The diagnosis of depressive disorders has suffered important modifications throughout DSM and ICD editions. The history of those modifications is an important subject to fully understand the current diagnostic criteria and classification, with milestones often set not by scientific or theoretical data but rather by political decision and conflicting interests.

Objective

The authors propose a review of how the concept of major depression has evolved along the several DSM and ICD editions.

Methods

The results were obtained searching literature included on the platforms PubMed, Google Scholar, PsycINFO and Psychology and Behavioral Sciences Collection.

Results

The current diagnostic entity lacks validity and utility and that is an obstacle to both scientific research and clinical practice.

Conclusion

The authors also discuss alternative models which may contribute to a paradigm shift more suitable to clinical reality and to provide a useful framework for all levels of research.

Disclosure of interest

The authors have not supplied their declaration of competing interest.

Screening for the SMIM1*64_80 del Allele in blood donors in a population from Southern Brazil

BACKGROUND AND OBJECTIVES

Serological screening for the Vel- phenotype is complex given the large individual variation in the levels of expression of the Vel antigen, and the polyclonal anti-human sera of immunised persons, when available, show heterogeneous reactivity levels. Studies of the SMIM1 gene have enabled the development of several molecular methodologies that will be crucially important for the screening of different populations, including Brazilians. To evaluate the deletion of 17 bp in the SMIM1 gene in a population from the south of Brazil, 448 unrelated blood donors from 7 regions comprising the haemotherapy network in the state of Santa Catarina were evaluated between August 2011 and March 2014.

MATERIALS AND METHODS

DNA samples from these donors were analysed employing a 5' nuclease real-time polymerase chain reaction (PCR) assay targeting the 17 bp deletion in the SMIM1 gene.

RESULTS

Among the 448 samples analysed, 10 (2·23%) harboured the 17 bp deletion of the gene SMIM1, and all were heterozygote for the SMIM1*64_80 del allele.

CONCLUSION

The allelic frequency found differed from those observed in other Caucasian populations. This difference can be explained by the ethnic make-up of each Caucasian population. The data obtained are important to characterise the correct phenotype of the donor as the serological assay results are not reliable due to variations in the expression intensity of the Vel antigen in heterozygote donors for the SMIM1*64_80 del allele. Moreover, the tool used in this study is of great value for identifying a donor Vel- phenotype and supplying a possible need for transfusion.

MicroRNA-124 loaded nanoparticles enhance brain repair in Parkinson's disease

Modulation of the subventricular zone (SVZ) neurogenic niche can enhance brain repair in several disorders including Parkinson's disease (PD). Herein, we used biocompatible and traceable polymeric nanoparticles (NPs) containing perfluoro-1,5-crown ether (PFCE) and coated with protamine sulfate to complex microRNA-124 (miR-124), a neuronal fate determinant. The ability of NPs to efficiently deliver miR-124 and prompt SVZ neurogenesis and brain repair in PD was evaluated. In vitro, miR-124 NPs were efficiently internalized by neural stem/progenitors cells and neuroblasts and promoted their neuronal commitment and maturation. The expression of Sox9 and Jagged1, two miR-124 targets and stemness-related genes, were also decreased upon miR-124 NP treatment. In vivo, the intracerebral administration of miR-124 NPs increased the number of migrating neuroblasts that reached the granule cell layer of the olfactory bulb, both in healthy and in a 6-hydroxydopamine (6-OHDA) mouse model for PD. MiR-124 NPs were also able to induce migration of neurons into the lesioned striatum of 6-OHDA-treated mice. Most importantly, miR-124 NPs proved to ameliorate motor symptoms of 6-OHDA mice, monitored by the apomorphine-induced rotation test. Altogether, we provide clear evidences to support the use of miR-124 NPs as a new therapeutic approach to boost endogenous brain repair mechanisms in a setting of neurodegeneration.

Retinoic acid-loaded polymeric nanoparticles enhance vascular regulation of neural stem cell survival and differentiation after ischaemia

Stroke is one of the leading causes of death and disability worldwide. However, current therapies only reach a small percentage of patients and may cause serious side effects. We propose the therapeutic use of retinoic acid-loaded nanoparticles (RA-NP) to safely and efficiently repair the ischaemic brain by creating a favourable pro-angiogenic environment that enhances neurogenesis and neuronal restitution. Our data showed that RA-NP enhanced endothelial cell proliferation and tubule network formation and protected against ischaemia-induced death. To evaluate the effect of RA-NP on vascular regulation of neural stem cell (NSC) survival and differentiation, endothelial cell-conditioned media (EC-CM) were collected. EC-CM from healthy RA-NP-treated cells reduced NSC death and promoted proliferation while EC-CM from ischaemic RA-NP-treated cells decreased cell death, increased proliferation and neuronal differentiation. In parallel, human endothelial progenitor cells (hEPC), which are part of the endogenous repair response to vascular injury, were collected from ischaemic stroke patients. hEPC treated with RA-NP had significantly higher proliferation, which further highlights the therapeutic potential of this formulation. To conclude, RA-NP protected endothelial cells from ischaemic death and stimulated the release of pro-survival, proliferation-stimulating factors and differentiation cues for NSC. RA-NP were shown to be up to 83-fold more efficient than free RA and to enhance hEPC proliferation. These data serve as a stepping stone to use RA-NP as vasculotrophic and neurogenic agents for vascular disorders and neurodegenerative diseases with compromised vasculature.

Control of attention in bipolar disorder: Effects of perceptual load in processing task-irrelevant facial expressions

Bipolar disorder (BD), along with schizophrenia, is one of the most severe psychiatric conditions and is correlated with attentional deficits and emotion dysregulation. Bipolar patients appear to be highly sensitive to the presence of emotional distractors. Yet, no study has investigated whether perceptual load modulates the interference of emotionally distracting information. Our main goal was to test whether bipolar patients are more sensitive to task-irrelevant emotional stimulus, even when the task demands a high amount of attentional resources.

Fourteen participants with BD I or BD II and 14 controls, age- and gender-matched, performed a target-letter discrimination task with emotional task-irrelevant stimulus (angry, happy and neutral facial expressions). Target-letters were presented among five distractor-letters, which could be the same (low perceptual load) or different (high perceptual load). Participants should discriminate the target-letter and ignore the facial expression. Response time and accuracy rate were analyzed.

Results

showed a greater interference of facial stimuli at high load than low load, confirming the effectiveness of perceptual load manipulation. More importantly, patients tarried significantly longer at high load. This is consistent with deficits in control of attention, showing that bipolar patients are more prone to distraction by task-irrelevant stimulus only when the task is more demanding. Moreover, for bipolar patients neutral and angry faces resulted in a higher interference with the task (longer response time), compared to controls, suggesting an attentional bias for neutral and threating social cues. Nevertheless, a more detailed investigation regarding the attentional impairments in social context in BD is needed.

Disclosure of interest

The authors have not supplied their declaration of competing interest.

Invasive Fungal Infections After Kidney Transplantation: A Single-center Experience

INTRODUCTION

Invasive fungal infections (IFI) affecting transplant recipients are associated with increased mortality and graft dysfunction.

OBJECTIVE

Describe the frequency, clinical features, and outcomes of IFI (except pneumocystis infection) in kidney transplant recipients.

METHOD

Single-center descriptive study including every kidney transplant recipient with a culture-proven or probable IFI between 2003 and 2013, according to the EORTC-MSG criteria.

RESULTS

We identified 45 IFI. There were 13 cases of invasive candidiasis (C. albicans: 6 and non-C. albicans candidial spp.: 7), 11 cases of pulmonary aspergillosis (A. fumigatus: 9 and A. flavus: 2); 11 cases of subcutaneous mycosis (Alternaria spp.: 9, Paecilomyces spp.: 1, and Pseudallescheria spp.: 1); 7 cases of cryptococcosis; 2 cases of pneumonia by non-Aspergillus molds (Mucor spp.: 1 and Cunninghamella spp.: 1); and 1 case of Geotrichum capitatum pneumonia. All patients were recipients from deceased donors. Six cases occurred in the first 3 months post-transplant, 15 cases between the third and twelfth months, and 21 cases after the twelfth month. Treatment options were fluconazole for Candida infections, voriconazole or caspofungin for aspergillosis, liposomal amphotericin for cryptococcosis, and itraconazole plus excision or cryotherapy for subcutaneous mycosis. Fifteen patients died (33%). Mortality rates were 15% for invasive candidiasis, 45% for aspergillosis, 71% for cryptococcosis, 100% for non-Aspergillus molds and G. capitatum pneumonia, and 0% for subcutaneous mycosis. Six patients who survived (14%) started regular hemodialysis.

CONCLUSION

IFI still have a high mortality and morbidity in kidney transplant recipients, as verified in this report. We reinforce the need for a high index of suspicion and prompt treatment.

Hospital food waste and environmental and economic indicators--A Portuguese case study

This study presents a comprehensive characterization of plate waste (food served but not eaten) at an acute care hospital in Portugal and elaborates on possible waste reduction measures. Even though waste prevention is a priority in Europe, large amounts of food are still being wasted every day, with hospitals giving rise to two to three times more food waste than other foodservice sectors. For this work the plate waste arising at the ward level was audited during 8 weeks, covering almost 8000 meals, using a general hospital as case study. Weighing the food served to patients and that returned after the meal allowed calculating plate waste for the average meal, as well as for individual meal items. Comparison of food waste arising showed that differences exist among wards, with some generating more waste than others. On average each patient throws away 953 g of food each day, representing 35% of the food served. This equates to 8.7 thousand tonnes of food waste being thrown away each year at hospitals across Portugal. These tonnes of food transformed into waste represent economic losses and environmental impacts, being estimated that 16.4 thousand tonnes of CO2 (equivalent) and 35.3 million euros are the annual national indicators in Portugal. This means that 0.5% of the Portuguese National Health budget gets thrown away as food waste. Given the magnitude of the food problem five measures were suggested to reduce food waste, and their potential impact and ease of implementation were discussed. Even though food waste is unavoidable the results obtained in this work highlight the potential financial and environmental savings for Portuguese hospitals, providing a basis to establish future strategies to tackle food waste.

Heat Dissipation Interfaces Based on Vertically Aligned Diamond/Graphite Nanoplatelets

Crystalline carbon-based materials are intrinsically chemically inert and good heat conductors, allowing their applications in a great variety of devices. A technological step forward in heat dissipators production can be given by tailoring the carbon phase microstructure, tuning the CVD synthesis conditions. In this work, a rapid bottom-up synthesis of vertically aligned hybrid material comprising diamond thin platelets covered by a crystalline graphite layer was developed. A single run was designed in order to produce a high aspect ratio nanostructured carbon material favoring the thermal dissipation under convection-governed conditions. The produced material was characterized by multiwavelength Raman spectroscopy and electron microscopy (scanning and transmission), and the macroscopic heat flux was evaluated. The results obtained confirm the enhancement of heat dissipation rate in the developed hybrid structures, when compared to smooth nanocrystalline diamond films.