Effect of gaseous ozone application during chilling on microbial and quality attributes of pig carcasses

Ozone application has been suggested as an additional measure to the slaughter animals under hygiene programs. In this study, we determined the efficacy of gaseous ozone applied to pig carcasses during chilling (16 h at 2-5°C). Forty carcasses were allocated to each treatment: control, without ozone application (T1) and 5 ppm gaseous ozone application (T2), divided in two 4-h periods. The carcasses were sampled before and after chilling. The average counts of total aerobic mesophilic (TAM) bacteria before chilling were not different (p = 0.55) between T1 and T2. In turn, after chilling, the ozone-treated carcasses had significantly reduced about 0.4 colony-forming units (CFU)/cm² of TAM counts (p < 0.001) than the control carcasses. No significant reduction was observed in the number of carcasses positive for Listeria sp. and Escherichia coli after gaseous ozone treatment; while a tendency (p = 0.08) of lower number of Salmonella positive carcasses in T2 was observed. Common macrorestriction (pulsed-field gel electrophoresis) patterns of S. enterica were observed in the carcasses before and after chilling. Pork samples from treated and untreated carcasses with ozone showed no lipid oxidation or altered color and pH. The results indicate that the gaseous ozone in the tested protocol is effective in reducing TAM populations, but not effective in decreasing the number of carcasses positive for E. coli and Listeria sp. Regarding Salmonella, the tendency of positive carcasses reduction may encourage further studies by testing other protocols of gaseous ozone application inside the chilling chamber.

Performance, carcass and meat quality of pigs submitted to immunocastration and different feeding programs

The feed restriction of pigs aims to improve the nutrient utilization of the diet, reduce carcass fat and increase lean meat. Immunocastration is a painless, reversible technique that improves animal welfare, decreases boar taint in meat, leading to lower fat deposition and increases lean meat. This study aimed at evaluating either feeding (restricted) programs (FP) and castration categories (surgically castrated × immunocastration) in terms of pig performance, carcass traits and meat quality. Castration category and FP did not influence marbling, initial pH and drip loss in loin and ham. However, immunocastrated pigs presented lighter loins and hams with lower ultimate pH, compared to the surgically castrated pigs. The FP with lower feed volume resulted in higher ultimate pH. Immunocastrated males had a higher live weight than those surgically castrated. Also, the more the feed supply decreased, the better the feed conversion. Immunocastrates had lower carcass yields, however these pigs had their backfat thickness decreased and lean meat increased in the carcass, without affecting the loin depth.

Detection of p-Nitroaniline Released from Degradation of 4,4'-Dinitrocarbanilide in Chicken Breast during Thermal Processing

The diphenylurea 4,4'-dinitrocarbanilide (DNC) is the residue of concern left in edible tissues of broilers fed diets containing the anticoccidial nicarbazin. When chicken meat is submitted to thermal processing, p-nitroaniline (p-NA) is expected from DNC degradation. This work aimed at evaluating whether thermal processing of DNC-containing chicken meat induces p-NA appearance. First, a hydrolysis assay was performed in aqueous solutions at 100 °C in different pH, confirming that DNC cleavage yields p-NA. Then a novel LC-MS/MS method was used to detect traces of this aromatic amine in DNC-containing chicken breast fillets subjected to cooking methods. Our evidence showed p-NA occurrence in such chicken meat samples, which corroborated results from hydrolysis assay. The p-NA appearance in fillets was rather discrete during boiling treatment, but its concentration became pronounced over time for grilling, frying, and roasting, achieving respectively 326.3, 640.0, and 456.9 μg/kg. As far as we are concerned, no other research identified degradation products from DNC residue in heat-processed chicken fillets. Therefore, this study leads to additional approaches to assess impacts on food safety.

A review on biogenic amines in food and feed: toxicological aspects, impact on health and control measures

Biogenic amines (BAs) represent a considerable toxicological risk in some food and feed products. They are formed under unhygienic conditions during storage and processing; therefore, an increase in the concentrations of those metabolites is related to putrefaction. Because BAs are thermostable, they remain in food and feed that have undergone heat treatment. There are several toxicological effects, especially caused by histamine, when high concentrations of BAs are ingested by humans, depending on the food itself and also on individual susceptibility and individual health status. The present paper reviews the main BAs in meat products, their use as spoilage indicators, the risk on human health and also the contamination of by-product meals. Furthermore, we highlight the state of art regarding impact of BAs on poultry, meat and eggs.

Degradation of 4,4'-Dinitrocarbanilide in Chicken Breast by Thermal Processing

Nicarbazin is one of the major anticoccidials used in broiler feeds. The compound 4,4'-dinitrocarbanilide (DNC) is the marker residue of concern left from nicarbazin in chicken meat. The effect of thermal processing on DNC content accumulated in chicken breast was assessed, and samples were analyzed by liquid chromatography-tandem mass spectrometry. Five conventional cooking methods were evaluated: boiling, grilling, microwaving, frying, and roasting. To ensure DNC in meat, broilers were fed nicarbazin without withdrawal period. All heating methods surpassed the 70 °C end point core temperature in chicken breast. Maximum DNC degradation was reached at 10 min for boiling, at 30 min for grilling, and at 2 min for microwaving, and no further reduction was observed for longer thermal processing time. Boiling was more efficient in reducing DNC (69%). Grilling, microwaving, and frying achieved on average 55% of degradation. The outcomes reported herein may be considered in decision-making regarding further review of maximum residue limits.

Application of Enzyme Digestion and Deconjugation Followed by Quick, Easy, Cheap, Effective, Rugged, Safe Extraction and Liquid Chromatography-Tandem Mass Spectrometry Methodology To Determine Ractopamine Residue in Pork

A new methodology is proposed for ractopamine residue analysis in pork. It consists of enzyme-mediated digestion and deconjugation steps; modified quick, easy, cheap, effective, rugged, and safe (QuEChERS) extraction; and liquid chromatography-tandem mass spectrometry (LC-MS/MS). In brief, the samples were digested with protease and then deconjugated with β-glucuronidase enzyme; they were then subjected to extraction and cleanup by QuEChERS and underwent sequential analysis by LC-MS/MS. The method performance was evaluated in accordance to the validation guidelines regulated by the Brazilian Ministry of Agriculture and Food Supply. The limit of detection was 0.15 μg/kg and limit of quantification was 0.5 μg/kg. When the method was applied to real samples, ractopamine residue was found in concentrations (up to 7.86 μg/kg) below international recommendation limits up to 10 μg/kg. The method is sensitive, accurate, quick, simple, and suitable for routine analysis; therefore, it is a monitoring tool that may be adopted by laboratories to achieve compliance levels.

Current research, regulation, risk, analytical methods and monitoring results for nicarbazin in chicken meat: A perspective review

This review presents up-to-date information about current research on nicarbazin, one of the most used anticoccidials in poultry production. The focus is to elucidate regulation concerning nicarbazin, limits for its residues in food, how maximum residue limits in different countries are calculated regarding edible chicken tissues and the possible implications in human health. Analytical methods to extract and quantify this residue, expressed as dinitrocarbanilide (DNC) are presented and discussed, including qualitative screening and quantitative/confirmatory analytical methods. Monitoring results and occurrence of DNC residues in chicken meat are discussed. Additionally, the causes of eventual chicken meat contamination and possible solutions to reduce or eliminate DNC residue in tissues are also presented. The paper concludes with perspectives, the current state of DNC residue analysis and suggestions for future research, especially considering the gap in the study of residue recycling effect due to continuous chicken litter use.

Effects of biodiesel made from swine and chicken fat residues on carbon monoxide, carbon dioxide, and nitrogen oxide emissions

The effects of two alternative sources of animal fat-derived biodiesel feedstock on CO₂, CO, NO_x tailpipe emissions as well as fuel consumption were investigated. Biodiesel blends were produced from chicken and swine fat waste (FW-1) or floating fat (FW-2) collected from slaughterhouse wastewater treatment processes. Tests were conducted in an unmodified stationary diesel engine operating under idling conditions in attempt to simulate slow traffic in urban areas. Significant reductions in CO (up to 47% for B100; FW-2) and NO_x (up to 20% for B5; FW-2 or B100; FW-1) were attained when using biodiesel fuels at the expense of 5% increase in fuel consumption. Principal component analysis (PCA) was performed to elucidate possible associations among gas (CO₂, CO, and NO_x) emissions, cetane number and iodine index with different sources of feedstock typically employed in the biodiesel industry. NO_x, cetane number and iodine index were inversely proportional to CO₂ and biodiesel concentration. High NO_x emissions were reported from high iodine index biodiesel derived especially from forestry, fishery and some agriculture feedstocks, while the biodiesel derived from animal sources consistently presented lower iodine index mitigating NO_x emissions. The obtained results point out the applicability of biodiesel fuels derived from fat-rich residues originated from animal production on mitigation of greenhouse gas emissions. The information may encourage practitioners from biodiesel industry whilst contributing towards development of sustainable animal production.

IMPLICATIONS

Emissions from motor vehicles can contribute considerably to the levels of greenhouse gases in the atmosphere. The use of biodiesel to replace or augment diesel can not only decrease our dependency on fossil fuels but also help decrease air pollution. Thus, different sources of feedstocks are constantly being explored for affordable biodiesel production. However, the amount of carbon monoxide (CO), carbon dioxide (CO₂), and/or nitrogen oxide (NO_x) emissions can vary largely depending on type of feedstock used to produce biodiesel. In this work, the authors demonstrated animal fat feasibility in replacing petrodiesel with less impact regarding greenhouse gas emissions than other sources.

Changes in lipid, fatty acids and phospholipids composition of whole rice bran after solid-state fungal fermentation

The aim of this study was to evaluate fermented rice bran phospholipids, lipids and fatty acid content in a fermentation solid system with Rhizopus oryzae fungus. For this, aliquots were withdrawn every 24h over 120 h. The content of phospholipids was determined by colorimetric method. Esterified fatty acids were separated by gas chromatography, then identified and quantified. The total lipids from fermented rice bran (FB) decreased from 20.4% to 11.2% in the range between 0 h and 120 h of fermentation while phospholipid contents were increased up to 2.4 mg P g(lipid)(-1). In fermented bran, oleic, palmitic and linoleic acids prevailed, with a decrease in saturated fatty acids (20%) and increase in the unsaturated ones (5%). This study showed that rice bran fermentation with R. oryzae can be applied to the production of phospholipids altering the saturated to unsaturated fatty acid ratio.