Effects of Connectivity Isomerization on Electron Transport Through Thiophene Heterocyclic Molecular Junction

Connectivity isomerization of the same aromatic molecular core with different substitution positions profoundly affects electron transport pathways and single-molecule conductance. Herein, we designed and synthesized all connectivity isomers of a thiophene (TP) aromatic ring substituted by two dihydrobenzo[b]thiophene (BT) groups with ethynyl spacers (m,n-TP-BT, (m,n = 2,3; 2,4; 2,5; 3,4)), to systematically probe how connectivity contributes to single-molecule conductance. Single-molecule conductance measurements using a scanning tunneling microscopy break junction (STM-BJ) technique show ∼12-fold change in conductance values, which follow an order of 10-4.83 G0 (2,4-TP-BT) < 10-4.78 G0 (3,4-TP-BT) < 10-4.06 G0 (2,3-TP-BT) < 10-3.75 G0 (2,5-TP-BT). Electronic structure analysis and theoretical simulations show that the connectivity isomerization significantly changes electron delocalization and HOMO-LUMO energy gaps. Moreover, the connectivity-dependent molecular structures lead to different quantum interference (QI) effects in electron transport, e.g., a strong destructive QI near E = EF leads the smallest conductance value for 2,4-TP-BT. This work proves a clear relationship between the connectivity isomerization and single-molecule conductance of thiophene heterocyclic molecular junctions for the future design of molecular devices.

[Study on the inhibitory and pro-apoptotic effects of different concentrations of total tanshinone alone and in combination with tyrosine kinase inhibitors on human myeloid leukemia cell lines]

Objective: To explore the effect and investigate the molecular mechanism of different concentrations of total tanshinones alone and in combination with tyrosine kinase inhibitors (TKIs) on the proliferation inhibition and apoptosis of human myeloid leukemia cell lines. Methods: K562 and Kasumi-1 cell lines were purchased from the Shanghai Cell Bank of the Chinese Academy of Sciences, and the TKIs-resistant strain K562/T315I cell line was constructed in Molecular Medicine Research Center, Beijing Lu Daopei Institute of Hematology. Logarithmic growth phase cells were taken and divided into intervention groups with total tanshinone of 0, 2.19, 4.38, 8.75, 17.50 and 35.00 μg/ml intervention groups, which were inoculated in 96-well plates at a density of 1×104 cells/well and exposed to the drug for 24 h, and a control group treated with dimethyl sulfoxide was also set up simultaneously. All experiments were repeated independently 3-5 times. The proliferative activity of the cells was assessed using the CCK-8 assay, the apoptotic rates were measured by flow cytometry, and the expression levels of apoptosis-regulating proteins Bcl-2 and Bax were analyzed by Western blotting. The cell lines treated and untreated with total tanshinone were subjected to transcriptome sequencing and gene set enrichment analysis to identify differentially expressed genes. Results: The half-inhibitory concentration (IC50) values of 8.75 μg/ml total tanshinone at 24 h for K562, K562/T315I and Kasumi-1 cells were (4.11±0.02), (4.95±0.04) and (3.98±0.01) μg/ml, respectively. When combined with 0.25 μmol/L imatinib, 8.75 μg/ml total tanshinone could enhance the induction of apoptosis effects on K562 and K562/T315I cell lines. After being treated with 4.38, 8.75, and 17.50 μg/ml of total tanshinone for 24 h, compared with the control group, total tanshinone upregulated the expression level of Bax protein, downregulated the expression level of Bcl-2 protein, and decreased the Bcl-2/Bax ratio (all P<0.05). Total tanshinone inhibited the proliferation-related signaling pathway and DNA damage repair pathway of myeloid leukemia cell lines, and activated the signaling pathway that induces apoptosis in leukemia cells. Conclusion: Different concentrations of total tanshinoneinhibites proliferation and promote apoptosis in K562, Kasumi-1 and TKIs-resistant K562/T315I cell lines, and further enhance the anti-leukemic effect when combined with TKIs.

Rapid detection of trace nitrobenzene in water via SERS using a portable Raman spectrometer

Nitrobenzene is currently the most widely used explosive substance, and is known for its high toxicity and mutagenicity. It can cause severe environmental and water pollution, posing a risk to public health. Among various explosives analysis methods, surface-enhanced Raman spectroscopy (SERS) has the advantages of fast analysis speed, low detection cost, and easy operation, and has become one of the most promising analytical detection methods. Here, we present a portable and reliable sol-based SERS method for the detection of trace amounts of 2,4,6-trinitrotoluene (TNT) in different water bodies. The Meisenheimer complex formed by nitrobenzene and hydrazine hydrate can assemble on unmodified Au nanoparticles in a sol via Au-N bonds, enabling rapid detection of TNT in seawater, lake water, and tap water using a portable Raman spectrometer. Experimental results show that this SERS method can complete the detection within a few minutes and the detection sensitivity can reach 0.01 mg L-1, which is far lower than China's national standard of no more than 0.5 mg L-1. Furthermore, this method was also successfully applied to detect trace 2,4-dinitrotoluene (2,4-DNT) and picric acid (2,4,6-trinitrophenol) in water, demonstrating its strong applicability for on-site detection of nitrobenzene explosives.

Local cation-tuned reversible single-molecule switch in electric double layer

The nature of molecule-electrode interface is critical for the integration of atomically precise molecules as functional components into circuits. Herein, we demonstrate that the electric field localized metal cations in outer Helmholtz plane can modulate interfacial Au-carboxyl contacts, realizing a reversible single-molecule switch. STM break junction and I-V measurements show the electrochemical gating of aliphatic and aromatic carboxylic acids have a conductance ON/OFF behavior in electrolyte solution containing metal cations (i.e., Na⁺, K⁺, Mg²⁺ and Ca²⁺), compared to almost no change in conductance without metal cations. In situ Raman spectra reveal strong molecular carboxyl-metal cation coordination at the negatively charged electrode surface, hindering the formation of molecular junctions for electron tunnelling. This work validates the critical role of localized cations in the electric double layer to regulate electron transport at the single-molecule level.

[Constructing the Bayesian network models to explore the factors related to glomerular and tubular injury]

Objective: To construct Bayesian network (BN) models to explore the factors related to glomerular injury (GI) and tubular injury (TI). Methods: A cross-sectional study was carried out. From April to November 2019, Shanxi Provincial People's Hospital performed an opportunistic screening for chronic kidney disease in 10 counties of Shanxi Province. The general data and laboratory results of blood and urine samples were collected. Chi-square test and logistic regression were used to explore the related factors of GI and TI, which were included in the construction of BN models with max-min hill-climbing (MMHC) algorithm. Results: A total of 12 269 participants were included, there were 5 198 males and 7 071 females, with a median age of 58 (40-91) years. The prevalence of GI and TI was 12.7% (1 561/12 269) and 11.6% (1 425/12 269), respectively. The BN model consisted of 8 nodes and 10 edges for GI, and 11 nodes and 17 edges for TI, respectively. BN models showed that age and glycated hemoglobin were direct related factors for GI, while gender and fasting blood glucose were indirect related factors for GI. Age, gender, fasting blood glucose and glycosylated hemoglobin were direct related factors for TI. Additionally, the area under the receiver operating characteristic curve (AUC) was 0.761 (95%CI: 0.746-0.777) and 0.753 (95%CI: 0.736-0.769) for GI and TI BN models, respectively. Conclusions: BN models allow for identifying the complex network relationships among the factors related to GI and TI. Meanwhile, Bayesian risk reasoning can provide reference value for the clinical prevention of GI and TI.

[Establishment of a prognostic model for non-nephrotic membranous nephropathy based on unbalanced data]

Objective: To explore the construction of a machine learning model based on unbalanced data to predict the progression of non-nephrotic membranous nephropathy. Methods: The clinical and pathological data of patients diagnosed with non-nephrotic membranous nephropathy by renal biopsy in Shanxi People's Hospital from January 2018 to December 2021 were retrospectively analyzed.The prediction models were constructed based on logistic regression, support vector machine (SVM) and light gradient boosting machine (lightGBM), respectively. The mixed sampling technology was used to process the unbalanced data, and the area under the receiver operating characteristic curve (AUC) was used to evaluate the predictive performance of the models. Finally, Shapley additive explanation (SHAP) was used to interpret the results of the optimal prediction model. Results: A total of 148 patients were included in the study, including 84 males and 64 females, with a mean age of (47.2±12.5) years. The follow-up time [M(Q₁, Q₃)] was 14(7, 20) months. Twenty-three patients (15.5%) achieved the renal end-point event in the study. The SVM model had the highest AUC (0.868, 95%CI: 0.813-0.925), followed by logistic regression (AUC=0.865, 95%CI: 0.755-0.899) and lightGBM (AUC=0.791, 95%CI: 0.690-0.882). The feature recursive elimination cross validation (RFECV) method based on random forest (RF) and the SHAP plot based on the SVM model showed that immunohistochemistry IgG, total protein (TP), anti-phospholipase A2 receptor (anti-PLA2R), blood chloride and D-Dimer were risk factors affecting the progress of non-nephrotic membranous nephropathy. Moreover, patients with high immunohistochemistry IgG, anti-PLA2R and D-Dimer had an increased risk of achieving the renal end-point event. Conclusion: The SVM model established in this study can effectively predict the progress of non-nephrotic membranous nephropathy, and provide a new method for the early identification of high-risk patients and precision therapy.

In situ Raman monitoring of electroreductive dehalogenation of aryl halides at an Ag/aqueous solution interface

Electroreductive dehalogenation as an efficient and green approach has attracted much attention in pollution remediation. Herein, we have employed a shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) technique to in situ probe the electroreductive dehalogenation process of aryl halides with thiol groups at Ag/aqueous solution interfaces. It is found that 4-bromothiophenol (BTP) and 4-chlorothiophenol (CTP) can turn into mixed products of 4,4'-biphenyldithiol (BPDT) and thiophenol (TP) as the electrode potential decreases. The conversion ratios estimated from the Raman intensity variations of C-Cl and C-Br vibrations are 44% and 58% for CTP and BTP in neutral solution, respectively. Furthermore, the quantitative analysis of benzene ring vibrations reveals a C-C cross coupling between the benzene free radical intermediate and adjacent TP product, which results in increased selectivity for biphenyl products at negative potentials.

Recent Advances in Single-Molecule Sensors Based on STM Break Junction Measurements

Single-molecule recognition and detection with the highest resolution measurement has been one of the ultimate goals in science and engineering. Break junction techniques, originally developed to measure single-molecule conductance, recently have also been proven to have the capacity for the label-free exploration of single-molecule physics and chemistry, which paves a new way for single-molecule detection with high temporal resolution. In this review, we outline the primary advances and potential of the STM break junction technique for qualitative identification and quantitative detection at a single-molecule level. The principles of operation of these single-molecule electrical sensing mainly in three regimes, ion, environmental pH and genetic material detection, are summarized. It clearly proves that the single-molecule electrical measurements with break junction techniques show a promising perspective for designing a simple, label-free and nondestructive electrical sensor with ultrahigh sensitivity and excellent selectivity.

In Situ Raman Monitoring of Potential-Dependent Adlayer Structures on the Au(111)/Ionic Liquid Interface

Probing the adlayer structures on an electrode/electrolyte interface is one of the most important tasks in modern electrochemistry for clarifying the electrochemical processes. Herein, we have combined cyclic voltammetry and electrochemical shell-isolated nanoparticle-enhanced Raman spectroscopy techniques to explore the potential-dependent adlayer structures on Au(111) in a room-temperature ionic liquid of 1-butyl-3-methylimidazolium hexafluorophosphate (BMIPF₆) without or with pyridine (Py). It is clearly found that the BMI⁺ cations strongly adsorb on the negatively charged surface with a flat-lying orientation, leaving a little space for Py adsorption. Upon increasing the potentials of the electrode, the variations of Raman band intensities and frequencies reveal that the interaction between the BMI⁺ cations and the Au surface becomes weak; meanwhile, the Py adsorption becomes strong, and its geometry turns from flat, tilted to vertical. Finally, BMI⁺ cations desorb and leave plenty of surface sites for Py adsorption in bulk solution, and a N-bonded compact Py adlayer is formed on the very positively charged surface. This causes obvious anodic peaks in cyclic voltammograms, and the peak currents increase with the square root of the scanning rate. The present work provides a fair molecular-level understanding of electrochemical interfaces and molecular adsorption of Py in ionic liquids.

Tuning the binding configurations of single-molecule junctions by molecular co-assembly

Significant variability issues in metal-molecule contacts, such as adsorption geometry, lead to characteristic variability in the electrical responses of individual molecules. Herein, co-assembling 1-ethylimidazole (EIM) on Au(111) has been shown to be a feasible and effective strategy for tuning the binding configurations of pyridine-linked molecular junctions in the most common aqueous environments and atmospheric environments. The single-molecule conductance measurements clearly show a transition from multiple conductance peaks to a single conductance peak with increasing EIM concentration. Raman spectroscopy and DFT calculations suggest that the thermodynamically favorable EIM adsorbate results in the vertical orientation of the bipyridine.

Electrochemically activated carbon-halogen bond cleavage and C-C coupling monitored by in situ shell-isolated nanoparticle-enhanced Raman spectroscopy

The electroreductive cleavage of carbon-halogen bonds has attracted increasing attention in both electrosynthesis and pollution remediation. Herein, by employing the in situ electrochemical shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) technique, we have successfully investigated the electroreductive dehalogenation process of aryl halides with the thiol group on a smooth Au electrode in aqueous solution at different pH values. The obtained potential-dependent Raman spectra directly reveal a mixture of the reduction products 4,4'-biphenyldithiol (BPDT) and thiophenol (TP). The conversion ratios of the C-Cl and C-Br bonds at pH = 7 are 37% and 55%, respectively. Furthermore, quantitative analysis of the intensity variations of ν(C-Cl), ν(C-Br) and aromatic ν(CC) stretching modes suggests electroreductive dehalogenation via both direct electron transfer reduction and electrocatalytic hydrodehalogenation. Molecular evidence for the C-C cross coupling process through TP reaction with benzene free radical intermediates is found at negative potentials, which leads to the increasing selectivity of biphenyl products.

Visualizing an Electrochemically Induced Radical Cation of Bipyridine at Au(111)/Ionic Liquid Interfaces toward a Single-Molecule Switch

Room-temperature ionic liquids (RTILs) emerged as ideal solvents, and bipyridine as one of the most used ligands have been widely employed in surface science, catalysis, and molecular electronics. Herein, in situ shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) and STM break junction (STM-BJ) technique has been employed to probe the electrochemical process of bipyridine at Au(111)/IL interfaces. It is interestingly found that these molecules undertake a redox process with a pair of well-defined reversible peaks in cyclic voltammograms (CVs). The spectroscopic evidence shows a radical cation generated with rising new Raman peaks related to parallel CC stretching of a positively charged pyridyl ring. Furthermore, these electrochemically charged bipyridine is also confirmed by electrochemical STM-BJ at the single-molecule level, which displays a binary conductance switch ratio of about 400% at the redox potentials. This present work offers a molecular-level insight into the pyridine-mediated reaction process and electron transport in RTILs.

Substituent-mediated quantum interference toward a giant single-molecule conductance variation

Quantum interference (QI) in single molecular junctions shows a promising perspective for realizing conceptual nanoelectronics. However, controlling and modulating the QI remains a big challenge. Herein, two-type substituents at different positions ofmeta-linked benzene, namely electron-donating methoxy (-OMe) and electron-withdrawing nitryl (-NO₂), are designed and synthesized to investigate the substituent effects on QI. The calculated transmission coefficientsT(E) indicates that -OMe and -NO₂could remove the antiresonance and destructive quantum interference (DQI)-induced transmission dips at position 2. -OMe could raise the antiresonance energy at position 4 while -NO₂groups removes the DQI features. For substituents at position 5, both of them are nonactive for tuning QI. The conductance measurements by scanning tunneling microscopy break junction show a good agreement with the theoretical prediction. More than two order of magnitude single-molecule conductance on/off ratio could be achieved at the different positions of -NO₂substituent groups at room temperature. The present work proves chemical substituents can be used for tuning QI features in single molecular junctions, which provides a feasible way toward realization of high-performance molecular devices.

Mechanically Induced Switching between Two Discrete Conductance States: A Potential Single-Molecule Variable Resistor

The fabrication of solid-state single-molecule switches with high on-off conductance ratios has been proposed to advance conventional technology in areas such as molecular electronics. Herein, we employed the scanning tunneling microscope break junction (STM-BJ) technique to modulate conductance in single-molecule junctions using mechanically induced stretching. Compound 1a possesses two dihydrobenzothiophene (DHBT) anchoring groups at the opposite ends linked with rigid alkyne side arms to form a gold-molecule-gold junction, while 1b contains 4-pyridine-anchoring groups. The incorporation of ferrocene into the backbone of each compound allows rotational freedom to the cyclopentadienyl (Cp) rings to give two distinct conductance states (high and low) for each. Various control experiments and suspended junction compression/retraction measurements indicate that these high- and low-conductance plateaus are the results of conformational changes within the junctions (extended and folded states) brought about by mechanically induced stretching. A high-low switching factor of 42 was achieved for 1a, whereas an exceptional conductance ratio in excess of 2 orders of magnitude (205) was observed for 1b. To the best of our knowledge, this is the highest experimental on-off conductance switching ratio for a single-molecule junction exploiting the mechanically induced STM-BJ method. Computational studies indicated that the two disparate conductance states observed for 1a and 1b result from mechanically induced conformational changes due to an interplay between conductance and the dihedral angles associated with the electrode-molecule interfaces. Our study reveals the structure-function relationship that determines conductance in such flexible and dynamic systems and promotes the development of a single-molecule variable resistor with high on-off switching factors.

Plasmonic Core-Shell Nanomaterials and their Applications in Spectroscopies

Plasmonic core-shell nanostructures have attracted considerable attention in the scientific community recently due to their highly tunable optical properties. Plasmon-enhanced spectroscopies are one of the main applications of plasmonic nanomaterials. When excited by an incident laser of suitable wavelength, strong and highly localized electromagnetic (EM) fields are generated around plasmonic nanomaterials, which can significantly boost excitation and/or radiation processes that amplify Raman, fluorescence, or nonlinear signals and improve spectroscopic sensitivity. Herein, recent developments in plasmon-enhanced spectroscopies utilizing core-shell nanostructures are reviewed, including shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS), plasmon-enhanced fluorescence spectroscopy, and plasmon-enhanced nonlinear spectroscopy.

Probing Interfacial Electronic Effects on Single-Molecule Adsorption Geometry and Electron Transport at Atomically Flat Surfaces

Clarifying interfacial electronic effects on molecular adsorption is significant in many chemical and biochemical processes. Here, we used STM breaking junction and shell-isolated nanoparticle-enhanced Raman spectroscopy to probe electron transport and adsorption geometries of 4,4'-bipyridine (4,4'-BPY) at Au(111). Modifying the surface with 1-butyl-3-methylimidazolium cation-containing ionic liquids (ILs) decreases surface electron density and stabilizes a vertical orientation of pyridine through nitrogen atom σ-bond interactions, resulting in uniform adsorption configurations for forming molecular junctions. Modulation from vertical, tilted, to flat, is achieved on adding water to ILs, leading to a new peak ascribed to CC stretching of adsorbed pyridyl ring and 316 % modulation of single-molecule conductance. The dihedral angle between adsorbed pyridyl ring and surface decreases with increasing surface electronic density, enhancing electron donation from surface to pyridyl ring.

Temperature-Dependent Tunneling in Furan Oligomer Single-Molecule Junctions

Two commonly observed charge transport mechanisms in single-molecule junctions are coherent tunneling and incoherent hopping. It has been generally believed that tunneling processes yield temperature-independent conductance behavior and hopping processes exhibit increasing conductance with increasing temperature. However, it has recently been proposed that tunneling can also yield temperature-dependent transport due to the thermal broadening of the Fermi energy of the contacts. In this work, we examine a series of rigid, planar furan oligomers that are free from a rotational internal degree of freedom to examine the temperature dependence of tunneling transport directly over a wide temperature range (78-300 K). Our results demonstrate conductance transition from a temperature-independent regime to a temperature-dependent regime. By examining various hopping and tunneling models and the correlation between the temperature dependence of conductance and molecular orbital energy offset from the Fermi level, we conclude thermally assisted tunneling is the dominant cause for the onset of temperature-dependent conductance in these systems.

z-Piezo Pulse-Modulated STM Break Junction: Toward Single-Molecule Rectifiers with Dissimilar Metal Electrodes

Fabricating single-molecule junctions with asymmetric metal electrodes is significant for realizing single-molecule diodes, but it remains a big challenge. Herein, we develop a z-piezo pulse-modulated scanning tunneling microscopy break junction (STM-BJ) technique to construct a robust asymmetric junction with different metal electrodes. The asymmetric Ag/BPY-EE/Au single-molecule junctions exhibit a middle conductance value in between those of the two individual symmetric metal electrode junctions, which is consistent with the order of calculated energy-dependent transmission coefficient T(E) of the asymmetric junctions at E_F. Furthermore, the single-molecule conductance of Ag/BPY-EE/Au decreases by about 70% when reversing the bias voltage from 100 to -100 mV, and a clear asymmetric I-V feature at the single-molecule level is observed for these junctions. This rectifying behavior could be ascribed to a different interfacial coupling of molecules at the two end electrodes, which is confirmed by the different displacement of T(E) at the two bias voltages. Other asymmetric junctions exhibit similar rectifying behavior. The current work provides a feasible way to fabricate hybrid junctions based on asymmetric metal electrodes and investigate their electron transport toward the design of molecular rectifiers.

Enhanced Gating Performance of Single-Molecule Conductance by Heterocyclic Molecules

Enhancing the gating performance of single-molecule conductance is significant for realizing molecular transistors. Herein, we report a new strategy to improve the electrochemical gating efficiency of single-molecule conductance with fused molecular structures consisting of heterocyclic rings of furan, thiophene, or selenophene. One order magnitude of gating ratio is achieved within a potential window of 1.2 V for the selenophene-based molecule, which is significantly greater than that of other heterocyclic and benzene ring molecules. This is caused by the different electronic structures of heterocyclic molecules and transmission coefficients T(E), and preliminary resonance tunneling is achieved through the highest occupied molecular orbital at high potential. The current work experimentally shows that electrochemical gating performance can be significantly modulated by the alignment of the conducting orbital of the heterocyclic molecule relative to the metal Fermi energy.

Single-Molecule Sensing of Interfacial Acid-Base Chemistry

Bronsted acid and base interactions are a cornerstone of chemistry describing a wide range of chemical phenomena. However, probing such interaction at the solid-liquid interface to extract the elementary and intrinsic information at a single-molecule level remains a big challenge. Herein, we employ an STM break junction (STM-BJ) technique to investigate the acid-base chemistry of carboxylic acid-based molecules at a Au (111) model surface and propose a prototype of a single-molecule pH sensor for the first time. The single-molecule measurements in different environmental conditions verify that the formation probability of molecular junctions is determined by the populations of deprotonated -COO^- form in a self-assembled monolayer. Furthermore, the variation of the intensity of the conductance peaks (i.e., junction-forming probability) with the pH of the bulk solution fits well to the Henderson-Hasselbalch type equation. From the equation, a good linear relation is found between the degree of dissociation of the immobilized -COOH group and the environmental pH, providing a feasible way to design chemicals and biosensors and a detector at the single-molecule scale.

[ABO gene subtypes and gene expression analysis in three cases of hematological malignancies patients]

Objective: To explore the application and discovery of genotyping, gene sequencing, and gene expression analysis in the determination of ABO blood group subtypes and antigen expression abnormalities in hematological malignancies patients. Methods: From June 2019 to May 2020, three clinical cases were found with forward and reverse ABO typing discrepancy or atypical serologic agglutination pattern in the laboratory and blood transfusion department of Hebei Yanda Ludaopei Hospital were selected. Sequence-specific primer PCR (PCR-SSP) and Sanger sequencing of ABO gene coding regions were performed to determine the ABO genotypes, and whole transcriptome sequencing was used to analyze ABO and FUT1 gene expression levels. Results: A 12-year-old female acute lymphoblastic leukemia patient was determined as O.01.02 and BA.04 sub-genotype, corresponding to the serological B(A) subtype, and her ABO gene expression was normal (354.80). A 41-year-old female acute myeloid leukemia patient was determined as A1.02 and B.01 genotype, corresponding to the serological A(1)B phenotype, and her ABO gene expression was significantly reduced (45.70). A 42-year-old male with myelodysplastic syndrome and myelofibrosis was determined as A1.02 and A2.05 sub-genotype, corresponding to the serological A(1) and A(2) phenotype, respectively, and his ABO expression was negative. FUT1 expression was in the normal range in all three cases. The clinical blood product infusion strategy was formulated according to the genotype and the corresponding immunological subtype, and no significant transfusion-related adverse reactions occurred. Conclusion: Blood group sub-genotypes or aberrant gene expression can lead to ambiguities in serological blood group determination in hematological malignancies patients. ABO genotyping and gene expression analysis can help in this scenario and escort blood product infusion safety.

Constructing Dual-Molecule Junctions to Probe Intermolecular Crosstalk

Understanding and controlling charge transport across multiple parallel molecules are fundamental to the creation of innovative functional electronic components, as future molecular devices will likely be multimolecular. The smallest possible molecular ensemble to address this challenge is a dual-molecule junction device, which has potential to unravel the effects of intermolecular crosstalk on electronic transport at the molecular level that cannot be elucidated using either conventional single-molecule or self-assembled monolayer (SAM) techniques. Herein, we demonstrate the fabrication of a scanning tunneling microscopy (STM) dual-molecule junction device, which utilizes noncovalent interactions and allows for direct comparison to the conventional STM single-molecule device. STM-break junction (BJ) measurements reveal a decrease in conductance of 10% per molecule from the dual-molecule to the single-molecule junction device. Quantum transport simulations indicate that this decrease is attributable to intermolecular crosstalk (i.e., intermolecular π-π interactions), with possible contributions from substrate-mediated coupling (i.e., molecule-electrode). This study provides the first experimental evidence to interpret intermolecular crosstalk in electronic transport at the STM-BJ level and translates the experimental observations into meaningful molecular information to enhance our fundamental knowledge of this subject matter. This approach is pertinent to the design and development of future multimolecular electronic components and also to other dual-molecular systems where such crosstalk is mediated by various noncovalent intermolecular interactions (e.g., electrostatic and hydrogen bonding).

[Malfunction of autophagy in tibial growth plate chondrocytes causes increased apoptosis rate in chronic renal insufficiency rats]

Objective: To observe the effect of autophagy of tibial growth plate chondrocyte on apoptosis in chronic renal insufficiency (CRI) rats. Methods: Male 4-week-old SD rats were randomly divided into two groups: (1) Sham group: only the left ureter was exposed (n=10); (2) CRI group: the left ureter was ligated to cause CRI (n=10). The urine from all the rats was collected 6 weeks after the operation and the total protein content was measured. Then all the rats were sacrificed and the concentrations of creatinine and urea nitrogen in intracardiac blood were detected. The proximal tibia were fixed and decalcified to prepare histological sections, and the number of chondrocytes of column cells in the proliferative area of tibia growth plate was observed by saffron O staining. The expression rate of protein Light Chain-3, an autophagy marker of chondrocytes, was detected by immunofluorescence. The apoptosis rate of chondrocytes was detected by the method of TUNEL assay. The level of glycogenin-1, a glycogen formation marker of chondrocyte was detected by immunohistochemistry in chondrocytes. Results: The 24 h urine total protein was higher in CRI group [(163.5±11.3) mg vs (38.6±9.8) mg, t=25.620, P<0.001]. The levels of blood creatinine [(67.3±16.2) μmol/L vs (28.4±11.5) μmol/L, t=5.974, P<0.001] and urea nitrogen [(16.4±6.4) mmol/L vs (4.8±2.0) mmol/L, t=5.198, P<0.001] were higher in CRI group. The number of chondrocytes of column cells in the proliferating area of tibia growth plate was lower in CRI group (4.2±2.1 vs 9.1±3.8, t=3.109, P=0.006). The expression rate of LC-3 protein in chondrocytes of CRI group was lower [(27.2±12.6)% vs (51.4±18.2)%, t=3.457, P=0.003]. The level of glycogenin-1 of chondrocytes in CRI group increased significantly (6.1±2.5 vs 3.5±1.8, t=2.669, P=0.016). The apoptosis rate of chondrocytes in CRI group also increased [(17.2±4.8)% vs (5.1±3.4)%, t=6.505, P<0.001]. Conclusion: Malfunction of autophagy in tibial growth plate chondrocytes causes increased apoptosis rate in CRI rats, which might be caused by the failure of glycogen degradation in chondrocytes.

[Effect of primary cilia expression rate on Wnt/β signaling pathway in tibial growth plate chondrocytes from chronic renal insufficiency young rats]

Objective: To observe the effect of primary cilia expression rate on Wnt/β signaling pathway in tibial growth plate chondrocytes from chronic renal insufficiency (CRI) young rats. Methods: Male 2-week-old SD rats were randomly divided into two groups: (1) Sham group: only the left ureter was exposed (n=6); (2) CRI group: the left ureter was ligated (n=6). Rats were sacrificed 2 weeks after the operation and the primary cilia expression rate of growth plate chondrocytes and key protein β-catenin in Wnt/β signaling pathway were observed in histological section of tibia specimen. Chondrocytes isolated from growth plate in two groups were cultured in vitro to P3 generation. The primary cilia expression rate and the level of β-catenin were measured. The primary cilia expression rate was detected by agonists and antagonists Wnt/β signaling pathway in chondrocytes of CRI group. The level of β-catenin was detected by using serum-free culture and chloral hydrate to intervene chondrocytes in CRI group. Results: The primary cilia expression rate of growth plate chondrocytes in histological section of tibia specimen in CRI group was higher than that in Sham group [(17.5±7.7)% vs (8.7±3.6)%, t=3.237, P=0.005], and the level of β-catenin was higher in CRI group (5.1±0.7 vs 1.9±0.8, t=6.731, P<0.001). The primary cilia expression rate of growth plate chondrocytes cultured in vitro in CRI group was higher than that in Sham group [(20.9±8.1)% vs (11.8±4.7)%, t=3.073, P=0.007], and the level of β-catenin was higher in CRI group (0.49±0.12 vs 0.25±0.11, t=3.297, P=0.011). There was no significant change in primary cilia expression rate after intervention by using Wnt/β signaling agonists and antagonists to change the level of β-catenin [agonists group: (21.3±7.6)%, control: (20.6±6.8)%, antagonists group: (22.4±6.2)%, F=0.173, P=0.842]. The level of β-catenin was significantly changed after intervention by using serum-free culture, chloral hydrate to alter the primary cilia expression rate (serum-free culture group: 0.61±0.23, control: 0.39±0.24, chloral hydrate group: 0.15±0.11, F=6.476, P=0.012). There was a positive correlation between the level of β-catenin and primary cilia expression rate. Conclusion: The primary cilia expression rate and the level of Wnt/β signaling pathway were higher in tibial growth plate chondrocytes in CRI rats model, and primary cilia might have positive regulatory effects on the Wnt/β signaling pathway.

In situ Spectroscopic Insight into the Origin of the Enhanced Performance of Bimetallic Nanocatalysts towards the Oxygen Reduction Reaction (ORR)

It is vital to understand the oxygen reduction reaction (ORR) mechanism at the molecular level for the rational design and synthesis of high activity fuel-cell catalysts. Surface enhanced Raman spectroscopy (SERS) is a powerful technique capable of detecting the bond vibrations of surface species in the low wavenumber range, however, using it to probe practical nanocatalysts remains extremely challenging. Herein, shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) was used to investigate ORR processes on the surface of bimetallic Pt₃ Co nanocatalyst structures. Direct spectroscopic evidence of *OOH suggests that ORR undergoes an associative mechanism on Pt₃ Co in both acidic and basic environments. Density functional theory (DFT) calculations show that the weak *O adsorption arise from electronic effect on the Pt₃ Co surface accounts for enhanced ORR activity. This work shows SHINERS is a promising technique for the real-time observation of catalytic processes.

Controlling Contact Configuration of Carboxylic Acid-Based Molecular Junctions Through Side Group

In this paper, the contact configuration of single molecular junction is controlled through side group, which is explored by electrochemical jump-to-contact STM break junction. The conductance values of 2-methoxy-1,3-benzenedicarboxylic acid (2-M-1,3-BDC) is around 10-3.65 G0, which is different from that of 5-methoxy-1,3-benzenedicarboxylic acid (5-M-1,3-BDC) with 10-3.20 G0. Interestingly, the conductance value of 2-M-1,3-BDC is the same as that of 1,3-benzenedicarboxaldehyde (1,3-BDCA), while single molecular junctions of 5-M-1,3-BDC and 1,3-benzenedicarboxylic acid (1,3-BDC) give out similar conductance value. Since 1,3-BDCA binds to the Cu electrode through one oxygen atom, the dominated contact configuration for 1,3-BDC is through two oxygen atoms. The different conductance values between 2-M-1,3-BDC and 5-M-1,3-BDC can be attributed to the different contact configurations caused by the position of the side group. The current work provides a feasible way to control the contact configuration between the anchoring group and the electrode, which may be useful in designing future molecular electronics.

Comparative Study of Single Molecular Junctions with Para-Phthalic Acid and Meta-Phthalic Acid Binding to Different Metal Electrodes

In this paper, single molecular junctions of Para-phthalic acid and Meta-phthalic acid with Au electrodes were studied by STM break junction approach. Conductance values of 10^-3.55 G₀ and 10^-3.70 G₀ were found for Para-phthalic acid and Meta-phthalic acid, respectively. The conductance order between Para-phthalic acid and Meta-phthalic acid with Au is different from that with Cu, which can be contributed to the different coupling between molecules and electrodes; different through-space interaction is proposed for such phenomenon between Cu and Au electrodes. Furthermore, the breaking off distances can reflect the length of molecules. The current work presents the important role of electrode in single molecular junctions with different position anchoring groups.

Boron carbide composites with highly aligned graphene nanoplatelets: light-weight and efficient electromagnetic interference shielding materials at high temperatures

B₄C-based ceramic composites containing 0-2 vol% highly aligned graphene nanoplatelets (GNPs) are fabricated. The electromagnetic interference (EMI) shielding properties of the obtained composites are investigated at X-band (8.2-12.4 GHz) frequency range from room-temperature up to 800 °C. All composites exhibit outstanding EMI shielding properties with satisfactory frequency- and thermal-stability. The shielding effectiveness (SE) of GNP/B₄C composites increases monotonically with increasing GNP loading. Superior room-temperature SE close to 40 dB is achieved with only 2 vol% GNPs and high SE around 35 dB still persists at 800 °C. Considering their relatively low density, GNP/B₄C composites possess a high specific shielding effectiveness (SSE) of 16 dB cm³ g^-1 which is among the highest values in reported ceramic-based shielding composites. Especially, the GNP/B₄C composite with 2 vol% GNPs exhibits the highest SSE/t (SSE divided by thickness) values at temperatures above 200 °C for all reported shielding composites, indicating that GNP/B₄C composites belong to the most promising high-temperature shielding composites. The excellent shielding properties of GNP/B₄C composites arise mainly from the high electrical conductivity, high dielectric loss and the multiple reflections by the highly aligned and large-sized GNP layers.

Supramolecularly Multicolor DNA Decoding Using an Indicator Competition Assay

Relative to the individual intensity-dependent strategy, the multicolor fluorescence sensor has promise to achieve a high signaling contrast. In this work, we develop a cucurbituril-based supramolecular and multicolor DNA recognition rationale via indicator competition assay (ICA). Alkaloids of coptisine (COP) and palmatine (PAL) are identified as the proof-of-principle indicators with a lighting-up fluorescence upon supramolecular complexation to cucurbit[7]uril (CB[7]). With an introduced abasic site (AP site) as the contestant, DNAs having pyrimidines opposite this site can compete for COP with CB[7] to bring an emission color change from green to yellow brown, while those having purines opposite the AP site do not compete for COP and still have the green emission, indicative of a high selectivity for the multicolor nucleotide transversion recognition. However, because of the relatively weaker binding of PAL with CB[7], the AP site-containing DNA can take away PAL from its CB[7] complex and resultantly bring a blue-to-green emission color change independent of the AP site-opposite nucleotide identity, dissimilar to the remaining blue color for the fully matched DNA without the AP site, suggesting a preferable strategy for the AP site biomarker detection. Our method demonstrates a new way to develop an ICA-based multicolor DNA sensor with the supramolecular cucurbituril complexation to ensure a highly selective performance.

Remarkable Multichannel Conductance of Novel Single-Molecule Wires Built on Through-Space Conjugated Hexaphenylbenzene

Through-bond conjugated molecules are the major frameworks for traditional molecular wires, while through-space conjugated units are rarely utilized and studied although they have shown unique conducting potential. Herein, we present novel single-molecule wires built on through-space conjugated hexaphenylbenzene. Their conductance, measured by the scanning tunneling microscopy based break-junction technique, increases with the improvement of through-space conjugation and finally reaches a remarkable value (12.28 nS) which greatly exceeds that of conventional through-bond conjugated counterpart (2.45 nS). The multichannel conducting model by integrating through-space and through-bond conjugations could be a promising strategy for the further design of robust single-molecule wires with advanced conductance and stability.

Side-Group Effect on Electron Transport of Single Molecular Junctions

In this article, we have investigated the influence of the nitro side-group on the single molecular conductance of pyridine-based molecules by scanning tunneling microscopy break junction. Single molecular conductance of 4,4'-bipyridine (BPY), 3-nitro-4-(pyridin-4-yl)pyridine (BPY-N), and 3-nitro-4-(3-nitropyridin-4-yl)pyridine (BPY-2N) were measured by contact with Au electrodes. For the BPY molecular junction, two sets of conductance were found with values around 10-3.1 G₀ (high G) and 10-3.7 G₀ (low G). The addition of nitro side-group(s) onto the pyridine ring resulted in lower conductance of 10-3.8 G₀ for BPY-N and 10-3.9 G₀ for BPY-2N, respectively, which can be attributed to the twist angle of two pyridine rings. Moreover, the steric hindrance of nitro group(s) also affects the contacting configuration of electrode-molecule-electrode. As a consequence, only one set of conductance value was observed for BPY-N and BPY-2N. Our work clearly shows the important role of side-groups on the electron transport of single-molecule junctions.

Low Tunneling Decay of Iodine-Terminated Alkane Single-Molecule Junctions

One key issue for the development of molecular electronic devices is to understand the electron transport of single-molecule junctions. In this work, we explore the electron transport of iodine-terminated alkane single molecular junctions using the scanning tunneling microscope-based break junction approach. The result shows that the conductance decreases exponentially with the increase of molecular length with a decay constant β_N = 0.5 per -CH₂ (or 4 nm^-1). Importantly, the tunneling decay of those molecular junctions is much lower than that of alkane molecules with thiol, amine, and carboxylic acid as the anchoring groups and even comparable to that of the conjugated oligophenyl molecules. The low tunneling decay is attributed to the small barrier height between iodine-terminated alkane molecule and Au, which is well supported by DFT calculations. The work suggests that the tunneling decay can be effectively tuned by the anchoring group, which may guide the manufacturing of molecular wires.

G-Quadruplex DNA with an Apurinic Site as a Soft Molecularly Imprinted Sensing Platform

Molecularly imprinted polymers (MIPs) provide versatile sensor platforms to recognize targets by shape complementarity. However, the rigid structure of the classic MIPs compromises the signal transduction with necessary polymer and target modifications. Herein, we tried to use a flexible DNA that has a perfectly structured folding as the soft molecularly imprinted polymer (SMIP) for a straightforward sensor. As a proof of concept, the guanosine SMIP recognition was achieved by removal of a guanosine from a G-quadruplex-forming sequence (G4). The G4 folding structure with such an apurinic site (AP site) provides a well-defined MIP binding accommodation for guanosine according to the shape complementarity. The guanosine binding at the AP site subsequently leads to a conformation change suitable for remote readout using a G4-specific fluorescent ligand. The G4 sequence and AP site position were optimized for this SMIP behavior. Due to the G4 compact structure and the remaining hydrogen bonding pattern, nucleosides other than guanosine and negatively charged nucleotides exhibit no binding with the AP site, suggesting a high selectivity in the SMIP recognition. The proposed rationale was then convinced by the alkaline phosphatase-catalyzed GMP hydrolysis. Our work will inspire more interest in exploring nucleic acids as the SMIP frameworks due to their variant conformations and well-established molecular engineering.

Conductance Measurement of Pyrazine Molecular Junction with Cu and Ag Electrodes

We have measured the conductance of pyrazine molecular junction contacting with Cu and Ag electrodes by using an electrochemical jump-to-contact based scanning tunneling microscopy break junction (ECSTM-BJ). While conductance values of 10-2.8 and 10-3.7 G0 are measured for pyrazineCu electrode, 10-2.1 and 10-3.3 G0 are found for pyrazine-Ag contact. The result shows that the conductance of pyrazine with Ag electrode is larger than that with Cu electrode, which can contribute to the different efficiency of electron transport along the molecular junction between Ag and Cu electrodes. The current work shows the important role for the electrode material in electron transport.

Detecting Electron Transport of Amino Acids by Using Conductance Measurement

The single molecular conductance of amino acids was measured by a scanning tunneling microscope (STM) break junction. Conductance measurement of alanine gives out two conductance values at 10^−1.85 G₀ (1095 nS) and 10^−3.7 G₀ (15.5 nS), while similar conductance values are also observed for aspartic acid and glutamic acid, which have one more carboxylic acid group compared with alanine. This may show that the backbone of NH₂–C–COOH is the primary means of electron transport in the molecular junction of aspartic acid and glutamic acid. However, NH₂–C–COOH is not the primary means of electron transport in the methionine junction, which may be caused by the strong interaction of the Au–SMe (methyl sulfide) bond for the methionine junction. The current work reveals the important role of the anchoring group in the electron transport in different amino acids junctions.

Comparative Study on Single-Molecule Junctions of Alkane- and Benzene-Based Molecules with Carboxylic Acid/Aldehyde as the Anchoring Groups

We have measured the alkane and benzene-based molecules with aldehyde and carboxylic acid as anchoring groups by using the electrochemical jump-to-contact scanning tunneling microscopy break junction (ECSTM-BJ) approach. The results show that molecule with benzene backbone has better peak shape and intensity than those with alkane backbone. Typically, high junction formation probability for same anchoring group (aldehyde and carboxylic acid) with benzene backbone is found, which contributes to the stronger attractive interaction between Cu and molecules with benzene backbone. The present work shows the import role of backbone in junction, which can guide the design molecule to form effective junction for studying molecular electronics.

Multichannel conductance of folded single-molecule wires aided by through-space conjugation

Deciphering charge transport through multichannel pathways in single-molecule junctions is of high importance to construct nanoscale electronic devices and deepen insight into biological redox processes. Herein, we report two tailor-made folded single-molecule wires featuring intramolecular π-π stacking interactions. The scanning tunneling microscope (STM) based break-junction technique and theoretical calculations show that through-bond and through-space conjugations are integrated into one single-molecule wire, allowing for two simultaneous conducting channels in a single-molecule junction. These folded molecules with stable π-π stacking interaction offer conceptual advances in single-molecule multichannel conductance, and are perfect models for conductance studies in biological systems, organic thin films, and π-stacked columnar aggregates.

Sputtered ZnO film on aluminium foils for flexible ultrasonic transducers

Nanocrystalline ZnO films with both C-axis vertical grown and inclined angled grown were sputter-deposited onto aluminium foils (50 μm thick) and characterised for using as flexible ultrasonic transducers. As-deposited C-axis grown ZnO films were annealed at different temperatures up to 600 °C to enhance film crystallinity and reduce film stress. The C-axis grown ZnO film on the Al foil were bonded onto steel plates, and the pulse-echo tests verified a good performance (with dominant longitudinal waves) of the ultrasonic transducers made from both as-deposited and post-annealed films. Inclined angled ZnO films on the Al foil glued onto steel plates generated mixed shear and longitudinal waves in the pulse-echo test.