1
|
Validation of a double-semicircular notched configuration for mechanical testing of orthodontic thermoplastic aligner materials. J Mech Behav Biomed Mater 2024; 155:106543. [PMID: 38636445 DOI: 10.1016/j.jmbbm.2024.106543] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/19/2024] [Revised: 04/05/2024] [Accepted: 04/10/2024] [Indexed: 04/20/2024]
Abstract
The potential of using specimens with a double-semicircular-notched configuration for performing tensile tests of orthodontic thermoplastic aligner materials was explored. Unnotched and double-semicircular-notched specimens were loaded in tension using a universal testing machine to determine their tensile strength, while finite element analysis (FEA) and digital image correlation (DIC) were used to estimate stress and strain, respectively. The shape did affect the tensile strength, demonstrating the importance of unifying the form of the specimen. During the elastic phase under tension, double-semicircular-notched specimens showed similar behavior to unnotched specimens. However, great variance was observed in the strain patterns of the unnotched specimens, which exhibited greater chance of end-failure, while the strain patterns of the double-semicircular-notched specimens showed uniformity. Considerable agreement between the theoretical (FEA) and practical models (DIC) further confirmed the validity of the double-semicircular-notched models.
Collapse
|
2
|
Evaluation of maxillary sinus changes following molar distalization using clear aligners: A three-dimensional study. JOURNAL OF STOMATOLOGY, ORAL AND MAXILLOFACIAL SURGERY 2024; 125:101815. [PMID: 38458547 DOI: 10.1016/j.jormas.2024.101815] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/15/2024] [Accepted: 03/05/2024] [Indexed: 03/10/2024]
Abstract
OBJECTIVE To evaluate the impact of molar distalization with clear aligners (CAs) on maxillary sinus parameters and its proximity to the root apices of maxillary molars using Cone Beam Computed Tomography (CBCT). METHODS The study involved pre- and post-treatment CBCT images of 27 adult patients. MIMICS 21.0 software was used to measure maxillary sinus volume and surface area, while Invivo Dental 6.0 program was used to measure the sinus diameters and proximity of the maxillary molar root apices to the sinus floor. RESULTS Post-treatment, there was a marked increase in the average volume and surface area of the maxillary sinus on both sides; however, changes in dimensions were not statistically significant. Sinus proximity to the root apices of the maxillary molars showed statistically significant differences, particularly on the left side for all roots. Gender and age impacted the outcomes, with males and younger individuals showing more pronounced changes. No significant differences were observed between the left and right sinuses in all parameters. CONCLUSION Molar distalization with CAs increases maxillary sinus parameters, more notably in younger and male patients. All molar teeth roots moved toward the sinus, particularly the mesiobuccal root of the maxillary second molar protruded to the sinus.
Collapse
|
3
|
Comparison of anxiety, pain, and quality of life in individuals with mild or moderate malocclusion between conventional fixed orthodontic treatment versus Invisalign: a randomised clinical trial. BMC Oral Health 2024; 24:576. [PMID: 38760747 PMCID: PMC11102135 DOI: 10.1186/s12903-024-04335-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/25/2024] [Accepted: 05/06/2024] [Indexed: 05/19/2024] Open
Abstract
BACKGROUND We evaluated anxiety, pain, and oral-health-related quality of life in individuals treated with conventional fixed appliances (Group A) and clear aligners (Group B) for moderate malocclusion during the initial phase of orthodontic treatment. METHODS Sixty individuals, separated into Group A (n = 30) and Group B (n = 30), were included in the study. They completed the Anxiety Levels, Oral Health Impact Profile-14, and Oral Health Related Quality of Life - United Kingdom/Surveys after the application of attachments on days 0 (T1), 10 (T10), and 20 (T20). Their pain levels were evaluated with the Visual Analogue Scale on days 0, 2, and 6 in the 2nd and 6th hours and on the 1st, 3rd, 7th, 14th, and 21st days. RESULTS Per the VAS questionnaire, pain levels in the 2nd hour, 6th hour, 1st day, and 3rd day were significantly lower in Group B than in Group A. In the OHIP-14 survey results, the comparison between Group A and Group B showed a significant difference only on the 1st day. The STAI and OHRQoL-UK survey results did not differ significantly between the groups. CONCLUSIONS We found no significant difference between the two groups in terms of anxiety levels, and pain among individuals in Group A was higher than in Group B only at the beginning of the treatment. No significant differences were observed in terms of individuals' quality of life. TRIAL REGISTRATION NCT06133296 (retrospectively registered)- Registration Date:15/11/2023.
Collapse
|
4
|
Assessment of salivary tumor necrosis factor-alpha level in the initial stages of treatment with fixed appliances and clear aligners. J Orthod Sci 2024; 13:15. [PMID: 38784076 PMCID: PMC11114450 DOI: 10.4103/jos.jos_81_23] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/16/2023] [Revised: 09/01/2023] [Accepted: 01/26/2024] [Indexed: 05/25/2024] Open
Abstract
OBJECTIVES To assess and compare the tumor necrosis factor-alpha (TNF-α) levels in saliva samples during the initial stages of orthodontic treatment with fixed orthodontic appliances (FAs) and clear aligners (CAs). MATERIALS AND METHODS This longitudinal study comprised 40 patients (22 males, 18 females, mean age 22 ± 7 years) who were categorized into two equal-sized groups. Group A comprised 20 patients treated with FA, and Group B comprised 20 patients treated with CA. Unstimulated saliva was collected before the intiation of treatment and then collected again after the placement of the FA/CA at 24 hrs, 7th day, and on the 21st day in both groups. TNF-α levels were determined through ELISA. STATISTICAL ANALYSIS The data were subjected to statistical analysis. For intragroup comparison of TNF-α at different time points, the Wilcoxon matched-pairs signed-rank test was used, and for intergroup comparison of FAs and CAs at different time points, the Mann-Whitney U test was used. RESULTS TNF-α levels in the saliva increased significantly at 24 hours, followed by a decline on the 7th day and 21st day in both groups. Changes in TNF-α levels were significantly higher in the FA group than those in the CA group at different time points. CONCLUSION This study showed that the salivary TNF-α levels increased significantly during the initial stages of FA and CA treatment at different time points. The mean salivary TNF-α level in both FA and CA groups increased significantly at 24 hours, followed by a decline on the 7th day and then on the 21st day. There was a significant difference between the FA and CA treatment, where the CAs showed a significantly low level of TNF-α in saliva at different intervals of time when compared to the FAs.
Collapse
|
5
|
Efficacy of clear aligner therapy over conventional fixed appliances in controlling orthodontic movement: A systematic review. J Orthod Sci 2024; 13:23. [PMID: 38784075 PMCID: PMC11114459 DOI: 10.4103/jos.jos_176_23] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/03/2023] [Revised: 12/10/2023] [Accepted: 01/03/2024] [Indexed: 05/25/2024] Open
Abstract
OBJECTIVE The purpose of the current systematic review was to answer the clinical research question "Is Clear Aligner Therapy (CAT) effective in controlling the orthodontic movement?" by bringing together the most up-to-date information about the available evidence for CAT. METHODOLOGY On January 1, 2023, a search was conducted in PubMed, ERIC, Embase, and CINHAL for any research papers published in the previous 10 years that provided an overview of the PICO questions. Both the titles and abstracts of the selected studies were evaluated independently by two different authors, and if there was any disagreement between the two review authors, a third reviewer was brought in to settle it. RESULTS Among included studies, three were retrospective non-randomized and two studies were prospective randomized clinical trials. Various authors reported better outcome for fixed orthodontic appliances than for clear aligner treatment (CAT) in relation to mandibular incisor proclination. The mean objective grading system score was better for braces (17) than for CAT (12) with no clinically significant difference, while staging had a significant impact on treatment efficacy. CONCLUSION The results of this study suggest that clear aligners may be an effective alternative to traditional braces, but more research is needed to confirm these findings and determine the optimal size of future prospective studies evaluating this treatment.
Collapse
|
6
|
Effect of attachment flash on clear aligner force delivery: an in vitro study. BMC Oral Health 2024; 24:538. [PMID: 38715004 PMCID: PMC11075209 DOI: 10.1186/s12903-024-04284-9] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/19/2023] [Accepted: 04/22/2024] [Indexed: 05/12/2024] Open
Abstract
BACKGROUND The introduction of auxiliaries such as composite attachment has improved the force delivery of clear aligner (CA) therapy. However, the placement of the attachment may give rise to a flash, defined as excess resin around the attachment which may affect CA force delivery. This in vitro study aims to determine the differences in the force generated by the attachment in the presence or absence of flash in CA. MATERIALS AND METHODS Tristar Trubalance aligner sheets were used to fabricate the CAs. Thirty-four resin models were 3D printed and 17 each, were bonded with ellipsoidal or rectangular attachments on maxillary right central incisors. Fuji Prescale pressure film was used to measure the force generated by the attachment of CA. The images of colour density produced on the films were processed using a calibrated pressure mapping system utilising image processing techniques and topographical force mapping to quantify the force. The force measurement process was repeated after the flash was removed from the attachment using tungsten-carbide bur on a slow-speed handpiece. RESULTS The intraclass correlation coefficient showed excellent reliability (ICC = 0.96, 95% CI = 0.92-0.98). The average mean force exerted by ellipsoidal attachments with flash was 8.05 ± 0.16 N, while 8.11 ± 0.18 N was without flash. As for rectangular attachments, the average mean force with flash was 8.48 ± 0.27 N, while 8.53 ± 0.13 N was without flash. Paired t-test revealed no statistically significant difference in the mean force exerted by CA in the presence or absence of flash for both ellipsoidal (p = 0.07) and rectangular attachments (p = 0.41). Rectangular attachments generated statistically significantly (p < 0.001) higher mean force than ellipsoidal attachments for flash and without flash. CONCLUSION Although rectangular attachment generated a significantly higher force than ellipsoidal attachment, the force generated by both attachments in the presence or absence of flash is similar (p > 0.05).
Collapse
|
7
|
Root resorption in clear aligner treatment detected by CBCT: a Systematic review and Meta-analysis. Int Dent J 2024:S0020-6539(24)00110-2. [PMID: 38692962 DOI: 10.1016/j.identj.2024.04.008] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/26/2023] [Revised: 03/21/2024] [Accepted: 04/03/2024] [Indexed: 05/03/2024] Open
Abstract
OBJECTIVE The aim of this study was to evaluate the amount of external apical root resorption in patients who had undergone orthodontic treatment with clear aligners evaluated using cone beam computed tomography. METHODS Studies that evaluated external apical root resorption before and after comprehensive orthodontic treatment with clear aligners were assessed by performing an electronic search from 5 databases comprising PubMed, SCOPUS, EBSCO, Cochrane Library, and LILACS and manual searches in the relevant journals and the reference lists of the included studies. Database search, elimination of duplicate studies, and data extraction were performed independently by 2 authors. The quality of the included studies was assessed using the Risk of Bias in Non-randomised Studies-of Interventions and the Cochrane Collaboration's Risk of Bias Tool. Studies that reported the tooth length or volume were used for quantitative analyses. RESULTS Nine studies were included in the meta-analysis. The overall root length after clear aligner treatment was significantly decreased compared with the pre-treatment length using cone beam computed tomography (mean differences = -0.56 mm, 95% confidence interval [-0.73, -0.38], P < .00001). However, only the maxillary central incisors, maxillary lateral incisors, and mandibular central incisors had significant reduction in root length. The meta-analysis from 3 studies also indicated that the root volume of the upper incisors also significantly decreased (mean differences = -13.34 mm3, 95% confidence interval [-16.57, -10.10], P < .00001). CONCLUSIONS Current evidence suggests that clear aligners can cause minimal root resorption. The highest amount of root resorption was observed in the maxillary central incisors.
Collapse
|
8
|
Noninvasive conservative management of anterior open bite treated with TADs versus clear aligner therapy. Clin Oral Investig 2024; 28:236. [PMID: 38556610 DOI: 10.1007/s00784-024-05634-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/03/2023] [Accepted: 03/23/2024] [Indexed: 04/02/2024]
Abstract
OBJECTIVES Anterior open bite can be treated non-surgically via molar intrusion using temporary skeletal devices (TAD). Clear aligner therapy (CAT) is recognized as a viable therapeutic modality for non-extraction treatment of adults with mild open bite. This study aimed to compare the treatment effect and mechanisms of open bite closure between patients treated with braces and TADs double arch intrusion and those treated with CAT. Treatment success at T3 was based on 1- positive overbite on ceph; 2- Change in the vertical dimension 3- post treatment POSI score equal to zero. MATERIAL AND METHODS The TAD group includes 18 consecutively treated patients from the main author. The CAT group consisted of 16 selected patients from three different orthodontists. The observation time points were as follows: pretreatment (T1), end of molar intrusion and positive overbite achieved (T2), end of treatment (T3), at least 6-month follow-up (T4). Treatment changes were assessed by cephalometric analysis and frontal intraoral photo. RESULTS At the end of treatment, 100% of the patient of the TAD group and 78,6% of the CAT group had a posi score of 0. The TAD group showed a significant reduction in vertical measurements (SN-MPA: -1,55° ± 0.41, LAFH: -3,05 ± 0.51 mm, U6-PP: -1.48 ± 0.30 mm), but the CAT group did not have significant changes for these variables. Both groups had significant increases in overbite from T1 to T3 (TAD: 4,32 ± 0,5 mm; CAT: 2,33 ± 0.56 mm), and overbite remained stable at T4. The CAT group did not have a significant upper molar intrusion, but a significant extrusion of 1.22 ± 0.42 mm of the lower incisor occurred. CONCLUSION The TAD group achieved bite closure by upper molar intrusion, lower molar and incisors vertical control, and mandibular plane counterclockwise rotation, resulting in an improved AP and vertical relationship. The CAT group achieved bite closure through the lower incisor extrusion without significant change in the vertical dimension. CLINICAL RELEVANCE This study provides relevant information about the skeletal and dental changes of open bite treatment with TADs double arch intrusion. The comparison with a control group treated with CAT confirms known information.
Collapse
|
9
|
Evaluating anchorage loss in upper incisors during distalization of maxillary posterior teeth using clear aligners in adult patients: A prospective randomized study. Korean J Orthod 2024; 54:117-127. [PMID: 38533599 DOI: 10.4041/kjod23.150] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/27/2023] [Revised: 01/15/2024] [Accepted: 02/23/2024] [Indexed: 03/28/2024] Open
Abstract
Objective : To evaluate the effect of clear aligner treatment and differential sequence distalization of maxillary posterior teeth on anchorage loss in the upper incisors (U1s). Methods : This study used lateral cephalometries and digital models of 12 patients treated with 33% sequential distalization (group 1, mean age: 22.9 ± 0.7 years, five males, seven females) and 12 treated with 50% sequential distalization (group 2, mean age: 25.83 ± 0.5 years, three males, nine females) acquired before and after distalization of upper second premolars (U5) and upper first molars (U6) and upper second molars (U7). The amount of distalization was determined as 2.5 mm in both the groups. Independent Samples t test was used to compare normally distributed parameters. Mann-Whitney U and Wilcoxon tests were used to compare parameters that were not normally distributed. Results : In both groups, the posterior teeth significantly moved by tipping distally and the U1s were displaced anteriorly. Increase in maxillary posterior transverse width (P < 0.001) and distopalatal rotation were observed in U5, U6, and U7 after distalization. It was also observed that U1 was significantly more proclined (1.82°; P < 0.001) and protruded (0.62 mm; P < 0.001), and the overjet (0.45 mm; P < 0.001) increased more in group 1 than in group 2. Conclusions : After sequential distalization of maxillary posterior teeth, more anchorage loss was observed in the anterior region in group 1 than in group 2.
Collapse
|
10
|
Clear aligner treatment assisted by mini screw for an adult with Class II division 2 malocclusion and a right upper canine completely outside of the dental arch: A case report. Int Orthod 2024; 22:100837. [PMID: 38160659 DOI: 10.1016/j.ortho.2023.100837] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/03/2023] [Revised: 12/04/2023] [Accepted: 12/06/2023] [Indexed: 01/03/2024]
Abstract
This case report describes a 19-year-old man presented with a 5.7-mm deep overbite, Class II division 2 malocclusion with the right upper maxillary canine completely buccal ectopia, deviated midline in the upper arch, severe crowding and retroclination of the maxillary and mandibular incisors. The patient was treated with clear aligners to correct the Class II relationship and the deep overbite. A series of clear aligners were used to move bilateral maxillary molars distally with unilateral mini-screw anchorage. The final results showed that clear aligners with mini-screws could effectively achieve the required upper distal molar movement thanks to a reasonable design of the stages and anchorage. The treatment was completed in 19 months and the patient was satisfied with the treatment outcome in this context of mild to moderate Class II division 2 malocclusion.
Collapse
|
11
|
Maxillary molar distalization treated with clear aligners combined with mini-implants and angel button using different traction force: a finite element study. Comput Methods Biomech Biomed Engin 2024; 27:296-305. [PMID: 36939836 DOI: 10.1080/10255842.2023.2183735] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/19/2022] [Revised: 02/11/2023] [Accepted: 02/16/2023] [Indexed: 03/21/2023]
Abstract
OBJECTIVES To evaluate the biomechanical system of molar distalization with clear aligner therapy (CAT) combined with angel button using interradicular mini-implants (IRMIs) with varying elastic forces. MATERIALS AND METHODS FE models including maxilla, complete maxillary dentition, periodontal ligaments (PDL), composite attachments, mini-implants (MI), and dedicated orthodontic aligner, were constructed. Three groups were created in accordance with the sagittal position of MI. Elastic forces (0 N,1 N,1.5 N,2 N) were applied. RESULTS CAT without elastics caused labial tipping and intrusion of the anterior teeth. Initial labial tipping and the von Mises stress of the maxillary anterior teeth decreased as the elastic forces increased.
Collapse
|
12
|
Surface wear of attachments in patients during clear aligner therapy: a prospective clinical study. Prog Orthod 2024; 25:7. [PMID: 38369617 PMCID: PMC10874919 DOI: 10.1186/s40510-023-00506-y] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/23/2023] [Accepted: 11/29/2023] [Indexed: 02/20/2024] Open
Abstract
BACKGROUND This prospective clinical study aimed to quantitatively evaluate the surface wear of attachments and investigate the associated risk factors. Additionally, the wear values and regions of three types of commonly used attachments were explored. METHODS Participants were recruited from the population of patients who received clear aligner therapy from October to December 2022. Intraoral scanning was performed on eligible participants before treatment (T0), immediately after initial bonding of attachments (T1), and at 2 months (T2), 4 months (T3), 6 months (T4), and 8 months (T5) after starting treatment. The attachment volume, average depth and regions of attachment wear were measured using superimposed digitized models. The Kruskal-Wallis test was performed to compare data between multiple groups. Multiple linear regression analyses were performed to evaluate risk factors for the volume of attachment wear. RESULTS A total of 47 patients with 617 attachments were included. As treatment time increased, the attachment volume decreased significantly (P = 0.003). The initial attachment volume was positively related to the volume of attachment wear (β = 0.527, P < 0.001). The volume of attachment wear was significantly greater in females than in males (β = 0.147, P = 0.020) and in optimized attachments than in conventional attachments (β = 0.308, P < 0.001). The wear of 3-mm rectangular attachments progressed from edges to buccal surfaces, with the deepest wear at corners of gingival edges; the wear of the optimized attachments was primarily located on surface ridges. The wear volume ratio of the optimized root control attachments was significantly greater than that of the 3-mm rectangular attachments at T3 (P = 0.011), T4 (P < 0.001), and T5 (P < 0.001). CONCLUSIONS The volume of attachment wear increased gradually with treatment time. Sex, attachment type, and initial attachment volume were risk factors for the volume of attachment wear. The deepest wear regions of 3-mm rectangular attachments were at the corners of gingival edges, while the deepest wear regions of optimized attachments were at surface ridges. Four months after treatment, optimized root control attachments showed more relative wear than 3-mm rectangular attachments.
Collapse
|
13
|
Orthodontic Practitioners' Knowledge and Education Demand on Clear Aligner Therapy. Int Dent J 2024; 74:81-87. [PMID: 37500450 PMCID: PMC10829360 DOI: 10.1016/j.identj.2023.07.001] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/10/2023] [Revised: 06/14/2023] [Accepted: 07/03/2023] [Indexed: 07/29/2023] Open
Abstract
OBJECTIVES Clear aligner therapy (CAT) has been gaining popularity amongst the orthodontic community. No systematic course on CAT has been reported to date. The objectives of this study were to determine practitioners' knowledge and to offer insights for future tailored courses on CAT. METHODS An online questionnaire was distributed. The questionnaire comprised personal background information, predictability of tooth movement through CAT, and CAT knowledge that practitioners demanded to learn. Four senior expert orthodontists' answers to the predictability of tooth movement through CAT were averaged to be a standard reference. Descriptive statistics, 1-way analysis of variance (ANOVA), principal component analysis, Student t test, and multivariate logistics regression analysis were performed with significance set at P < .05. RESULTS In total, 190 practitioners participated in this study. As compared to the standard reference, participants overestimated the predictability of difficult-to-be-achived tooth movements (eg, molar mesialisation; P < .0001). Strategy of managing troubleshooting cases and extraction cases ranked the highest CAT knowledge that participants requested to learn. Practice type, number of completed CAT cases, number of undergoing CAT cases, years of practice, education background, and time of using CAT were the influencing factors of the questions regarding the predictability of tooth movement through CAT and CAT knowledge that were demanded to be learned. CONCLUSIONS The predictability of difficult-to-be-achieved tooth movement through CAT is often overestimated by practitioners with limited clinical experience. Tailored education on CAT, especially managing troubleshooting cases and extraction cases, should be designed for all practitioners.
Collapse
|
14
|
The effect of increasing the gaps between the front teeth on torque and intrusion control of the incisors for anterior retraction with clear aligners: a prospective study. BMC Oral Health 2024; 24:115. [PMID: 38243207 PMCID: PMC10799443 DOI: 10.1186/s12903-024-03867-w] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/05/2023] [Accepted: 01/05/2024] [Indexed: 01/21/2024] Open
Abstract
OBJECTIVE To investigate the effect of sequential distalization on increasing gaps in the maxillary anterior teeth, focusing on the control of torque and three-dimensional teeth movement during anterior retraction with clear aligners in extraction cases. METHODS We recruited 24 patients who were undergoing extraction bilateral maxillary first premolars with clear aligners. According to a predetermined increment in the spaces between the maxillary anterior teeth, the patients were divided into three groups: those with no gap (9 cases), a 0.5 mm gap (6 cases) and a 1.0 mm gap (9 cases). In each group, a 2.0 mm en-mass retraction was applied on the anterior teeth. Plaster casts of the upper full dentition were obtained both before and after a 2 mm retraction. The palatal folds were used to overlap each pair of models. The three-dimensional movement of the teeth and the change of torque for the anterior teeth were subsequently analyzed using Geomagic Studio 2014 software. RESULTS The change in torque in the groups with added gaps was significantly smaller than that in the group with no gaps (P < 0.05). There was no significant difference in this respect when comparing the group with a 0.5 mm gap added to the group with a 1.0 mm gap was added (P > 0.05). In the labial-lingual and vertical directions, the displacements of the central and lateral incisors were smaller in the groups with additional gaps compared to those in the groups without gaps (P < 0.05). However, there was no significant difference observed when comparing the group with a 0.5 mm added gap to the group with a 1.0 mm added gap (P > 0.05). Then, a comparison was made between the displacement of the second premolar to the second molar in the mesial-distal direction across all groups. The study revealed that the anchorage molars in the group without gaps demonstrated significantly smaller displacement compared to those in the group with additional gaps (P < 0.05). CONCLUSION Advantages were observed in controlling the torque of the anterior teeth and achieving a desired pattern closer to normal bodily movement by sequentially distalizing the maxillary anterior teeth gaps. Increasing the gaps between the maxillary anterior teeth also resulted in improved control of the vertical direction of the anterior teeth. However, this retraction strategy necessitates substantial protection of the anchorage molars.
Collapse
|
15
|
The effect of enhanced structure in the posterior segment of clear aligners during anterior retraction: a three-dimensional finite element and experimental model analysis. Prog Orthod 2024; 25:3. [PMID: 38221549 PMCID: PMC10788328 DOI: 10.1186/s40510-023-00502-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/31/2023] [Accepted: 11/21/2023] [Indexed: 01/16/2024] Open
Abstract
BACKGROUND Mesial tipping of posterior teeth occurs frequently during space closure with clear aligners (CAs). In this study, we proposed a new modification of CA by localized thickening of the aligner to form the enhanced structure and investigate its biomechanical effect during anterior retraction. METHODS Two methods were employed in this study. First, a finite element (FE) model was constructed, which included alveolar bone, the first premolars extracted maxillary dentition, periodontal ligaments (PDL), attachments and aligners. The second method involved an experimental model-a measuring device using multi-axis transducers and vacuum thermoforming aligners. Two groups were formed: (1) The control group used common CAs and (2) the enhanced structure group used partially thickened CAs. RESULTS FE model revealed that the enhanced structure improved the biomechanics during anterior retraction. Specifically, the second premolar, which had a smaller PDL area, experienced a smaller protraction force and moment, making it less likely to tip mesially. In the same vein, the molars could resist movement due to their larger PDL area even though they were applied larger forces. The resultant force of the posterior tooth was closer to the center of resistance, reducing the tipping moment. The canine was applied a larger retraction force and moment, resulting in sufficient retraction of anterior teeth. The experimental model demonstrated a similar trend in force variation as the FE model. CONCLUSIONS Enhanced structure allowed force distribution more in accordance with optimal principles of biomechanics during the extraction space closure while permitting less mesial tipping and anchorage loss of posterior teeth and better retraction of anterior teeth. Thus, enhanced structure alleviated the roller coaster effect associated with extraction cases and offered a new possibility for anchorage reinforcement in clear aligner therapy.
Collapse
|
16
|
Comparative assessment of orthodontic clear aligner versus fixed appliance for anterior retraction: a finite element study. BMC Oral Health 2024; 24:80. [PMID: 38218801 PMCID: PMC10787995 DOI: 10.1186/s12903-023-03704-6] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/04/2023] [Accepted: 11/22/2023] [Indexed: 01/15/2024] Open
Abstract
BACKGROUND The aim of this study is to conduct a comparative evaluation of different designs of clear aligners and examine the disparities between clear aligners and fixed appliances. METHODS 3D digital models were created, consisting of a maxillary dentition without first premolars, maxilla, periodontal ligaments, attachments, micro-implant, 3D printed lingual retractor, brackets, archwire and clear aligner. The study involved the creation of five design models for clear aligner maxillary anterior internal retraction and one design model for fixed appliance maxillary anterior internal retraction, which were subsequently subjected to finite element analysis. These design models included: (1) Model C0 Control, (2) Model C1 Posterior Micro-implant, (3) Model C2 Anterior Micro-implant, (4) Model C3 Palatal Plate, (5) Model C4 Lingual Retractor, and (6) Model F0 Fixed Appliance. RESULTS In the clear aligner models, a consistent pattern of tooth movement was observed. Notably, among all tested models, the modified clear aligner Model C3 exhibited the smallest differences in sagittal displacement of the crown-root of the central incisor, vertical displacement of the central incisor, sagittal displacement of the second premolar and second molar, as well as vertical displacement of posterior teeth. However, distinct variations in tooth movement trends were observed between the clear aligner models and the fixed appliance model. Furthermore, compared to the fixed appliance model, significant increases in tooth displacement were achieved with the use of clear aligner models. CONCLUSIONS In the clear aligner models, the movement trend of the teeth remained consistent, but there were variations in the amount of tooth displacement. Overall, the Model C3 exhibited better torque control and provided greater protection for posterior anchorage teeth compared to the other four clear aligner models. On the other hand, the fixed appliance model provides superior anterior torque control and better protection of the posterior anchorage teeth compared to clear aligner models. The clear aligner approach and the fixed appliance approach still exhibit a disparity; nevertheless, this study offers a developmental direction and establishes a theoretical foundation for future non-invasive, aesthetically pleasing, comfortable, and efficient modalities of clear aligner treatment.
Collapse
|
17
|
Three-dimensional measurement and analysis of Mandibular Molar Distalization assisted by micro-implant anchorage combined with clear aligner. Pak J Med Sci 2024; 40:455-460. [PMID: 38356811 PMCID: PMC10862430 DOI: 10.12669/pjms.40.3.7759] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/25/2023] [Revised: 05/15/2023] [Accepted: 11/16/2023] [Indexed: 02/16/2024] Open
Abstract
Objective To investigate the effect of micro-implant anchorage combined with a clear aligner on the efficiency of mandibular molar distalization and the protection of anterior teeth anchorage, provide reference for clinical scheme design. Methods This is a prospective study. Seventeen patients who were treated in the Orthodontics Department of the Hospital of Stomatology affiliated to Fujian Medical University from 2019 to 2021 and used Invisalign clear aligners to move mandibular molars distally were included and divided into two groups according to anchorage types: Group-A and Group-B. Group-A (ten cases) were treated without micro-implant anchorage, while Group-B (seven cases) were treated with micro-implant anchorage nails for enhanced anchorage. The effect of micro-implant anchorage on crown and root distal movement of mandibular molars and the difference in three-dimensional movement between mandibular molars and mandibular central incisors were analyzed. Results The crown distalization efficiency of mandibular first and second molars in Group-B was 68.66% and 71.02%, respectively, which were higher than those in Group-A(p<0.05). The mandibular central incisors in Group-A showed labial displacement and a small amount of elongation, while those in Group-B showed less anchorage loss(p<0.05). In Group-A, the crown was tilted in the distal direction and moved in the buccal direction during mandibular molar distalization(p<0.05). While in Group-B, the crown was tilted in the distal directio (p<0.05) and the mandibular second molar was depressed(p<0.05). Conclusion In the process of mandibular molar distalization assisted by micro-implant anchorage combined with a clear aligner, better protects the anchorage of the mandibular central incisor and improves the efficiency of the molar crown distalization.
Collapse
|
18
|
Assessment of dental, skeletal, and soft tissue changes following mandibular advancement with Invisalign in skeletal Class II. Saudi Dent J 2024; 36:66-71. [PMID: 38375387 PMCID: PMC10874789 DOI: 10.1016/j.sdentj.2023.09.005] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/28/2023] [Revised: 09/06/2023] [Accepted: 09/10/2023] [Indexed: 02/21/2024] Open
Abstract
Objective This study evaluated the dentoskeletal and soft tissue changes for Class II malocclusion patients treated with Invisalign clear aligners with mandibular wings (IAMW). Methods This retrospective study included 50 skeletal Class II patients treated with Invisalign clear aligner with mandibular wings. Records of 20 subjects were collected from the AAOF Legacy Collection (The Case Western Bolton Brush Growth Study) and were used as a control. The dental, skeletal, and facial soft tissue changes were assessed by digitizing and analyzing lateral cephalograms using Dolphin Imaging software (version 11.95 Premium; Dolphin Imaging & Management Solutions, Chatsworth, Calif). Paired t-tests and independent t-tests were used to assess the changes before and after and to compare between the IAMW and control groups. Results The different measurements of the maxilla have shown that IAMW effect on the maxilla included minimal, non-significant retraction compared to the control group. The SNB and mandibular base position increased by 1.17° (±2.63) and 3.79 (±8.13), respectively. The mandible advanced significantly in the treatment group compared to the control group. Dentally, the lower incisors tipped slightly buccally, but the change was not significant (p > 0.05). The facial convexity angle decreased by 1.16° (±4.36). Conclusion Invisalign clear aligner with mandibular advancer wings was able to correct the Class II malocclusion. This correction was mainly skeletal with some dental changes. This device can be used to address the growth modification problem in Class II malocclusion at the same time as addressing the other occlusal problems.
Collapse
|
19
|
Biomechanical effects of different staging and attachment designs in maxillary molar distalization with clear aligner: a finite element study. Prog Orthod 2023; 24:43. [PMID: 38044352 PMCID: PMC10694119 DOI: 10.1186/s40510-023-00493-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/04/2023] [Accepted: 09/26/2023] [Indexed: 12/05/2023] Open
Abstract
BACKGROUND In the present study, the effects of distalizations of one and two molars with different step distances and attachment designs have been analyzed. METHODS A 3D finite element analysis model has been developed in order to determine the tendency of tooth displacement and stress distribution with clear aligner treatment. RESULTS Under the condition of single-molar distalization, when the step distance was set to 0.25 mm, the total displacement was 0.086 mm for central incisors, 0.080 mm for lateral incisors, 0.084 mm for canines, 0.102 mm for the first premolar and 0.076 mm for the second premolar. The von Mises stress of roots and the principal stress of the periodontal ligament was slightly lower than in the control group when the step distance was set to 0.130 mm. Under the condition of two-molar distalization, when the step distance was set to 0.130 mm, the total displacements for central incisors, lateral incisors and canines as well as both the first and second maxillary molars were basically the same as with a distance of 0.250 mm for one-molar distalization. In addition, when the step distance was 0.130 mm with two-molar distalization, the rotation center of the first and second molar was closer to the apex of the root indicating that the smaller step distance led to more bodily movement during the two-molar distalization. However, displacement tendencies of the first molar and the second molar were basically the same whether horizontal or vertical rectangular attachments were added. CONCLUSIONS A step distance of moving two molars to 0.130 mm can achieve the same reaction force on the anterior teeth as moving one molar 0.250 mm without effects on horizontal or vertical rectangular attachments. CLINICAL RELEVANCE Our results provide a theoretical basis and guidance for simultaneously moving two molars backward in clinical practice using a clear aligner.
Collapse
|
20
|
Comparison of the bond strength of five different composites used in the production of clear aligner attachments. JOURNAL OF STOMATOLOGY, ORAL AND MAXILLOFACIAL SURGERY 2023; 124:101481. [PMID: 37080356 DOI: 10.1016/j.jormas.2023.101481] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/24/2023] [Revised: 04/04/2023] [Accepted: 04/18/2023] [Indexed: 04/22/2023]
Abstract
AIM The aims of this study were to measure and compare shear bond strength (SBS) and manipulation time (MT) among five different composite resins (CR; two flowable and three highly viscous) which are used in the production of clear aligner attachments. MATERIAL AND METHODS This in vitro experiment study comprised of 150 extracted premolars which were divided into 5 equal groups. Predictor variables were CRs; Tetric Evo Ceram (Ivoclar VivadentAG, Liechtenstein) (Group 1), Tetric NCeram; (Ivoclar VivadentAG, Liechtenstein) (Group 2), Tetric N-Flow (GC Dental Products, Tokyo, Japan) (Group 3), G-aenial Universal Injectable (GC Dental Products, Tokyo, Japan) (Group 4), GC Aligner Connect (GC Dental Products, Tokyo, Japan) (Group 5), respectively. Outcome variables were; SBS and MT for each CR attachment in each group of teeth. Oneway ANOVA was used to compare the groups. Levene's test was used to determine variance homogeneity. In terms of variance homogeneity, Bonferroni tests were used as a post-hoc test for multiple group comparisons. RESULTS SBS was statistically different between study groups (p < 0.001). Average SBS values are found to be 16.6 ± 3.6 MPa for Tetric Evo Ceram; 20.7 ± 5.4 MPa for Tetric NCeram; 21.0 ± 4.0 MPa for Tetric N-Flow; 18.9 ± 5.0 MPa for G-aenial Universal Injectable; and 17.4 ± 3.5 MPa for GC Aligner Connect. The values in the Tetric Evo Ceram group were significantly lower than the Tetric N-Ceram group (p = 0.004) and the Tetric N-Flow group (p = 0.001). Mean value of shear bond strength in the GC Aligner connect group were significantly lower than in the Tetric N-Ceram group (p = 0.047) and in the Tetric N-Flow group (p = 0.017). Flowable composite had a significantly shorter manipulation time than the high viscous one; mean 1,08 ± 0,22 min to mean 4,57 ± 0,51 min, respectively. CONCLUSION Although SBSs of CRs tested in the study was found to be statistically different, they all quite exceeded the accepted clinically sufficient value of 6-8 MPa. Besides, flowable composite required substantially less time to manipulate than the high viscosity composite.
Collapse
|
21
|
Comparison of sleep quality between clear aligner and fixed appliance orthodontic therapies. J World Fed Orthod 2023; 12:245-250. [PMID: 37839985 DOI: 10.1016/j.ejwf.2023.09.002] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/26/2023] [Revised: 09/08/2023] [Accepted: 09/18/2023] [Indexed: 10/17/2023]
Abstract
BACKGROUND Although available evidence suggests that orthodontic appliances can impact quality of life, there is limited information on the impact of orthodontic appliances on sleep quality. This study aimed to compare sleep quality between patients undergoing orthodontic treatments using conventional fixed appliances and clear aligners. METHODS Adult patients attending clinics in Saudi Arabia participated in this cross-sectional study. Sleep quality was assessed using the validated Arabic version of the Pittsburgh Sleep Quality Index (PSQI) and the Epworth Sleepiness Scale (ESS). Statistical significance was determined using inferential analysis, with a P < 0.05 considered statistically significant. RESULTS There were 69 patients included in the study. The average age of a patient (33.12 ± 8.1) who received the clear aligner was significantly higher than those who received the fixed appliance (27.7 ± 5.9) (P < 0.05). The variation in the average score of ESS because of the education level was found to be statistically significant (P < 0.05). No significant difference was observed between the mean average ESS and PSQI global scores across the two orthodontic treatment groups. The average sleep latency scores were significantly higher in females than males when analyzing the PSQI component score across sex (P < 0.05). In education, ESS, PSQI global, habitual sleep efficiency, the use of sleep medication, and daytime dysfunction had a positive, weak, but significant correlation. CONCLUSIONS Overall, this study concluded that regardless of the orthodontic appliances used, there was no statistically significant difference in sleep quality during the treatment.
Collapse
|
22
|
Biomechanical analysis for different mandibular total distalization methods with clear aligners: A finite element study. Korean J Orthod 2023; 53:420-430. [PMID: 37989578 PMCID: PMC10663580 DOI: 10.4041/kjod23.035] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/14/2023] [Revised: 09/08/2023] [Accepted: 09/14/2023] [Indexed: 11/23/2023] Open
Abstract
Objective : The purpose of this finite element method (FEM) study was to analyze the biomechanical differences and tooth displacement patterns according to the traction direction, methods, and sites for total distalization of the mandibular dentition using clear aligner treatment (CAT). Methods : A finite element analysis was performed on four FEM models using different traction methods (via a precision cut hook or button) and traction sites (mandibular canine or first premolar). A distalization force of 1.5 N was applied to the traction site by changing the direction from -30 to +30° to the occlusal plane. The initial tooth displacement and von Mises stress on the clear aligners were analyzed. Results : All CAT-based total distalization groups showed an overall trend of clockwise or counterclockwise rotation of the occlusal plane as the force direction varied. Mesiodistal tipping of individual teeth was more prominent than that of bodily movements. The initial displacement pattern of the mandibular teeth was more predominant based on the traction site than on the traction method. The elastic deformation of clear aligners is attributed to unintentional lingual tipping or extrusion of the mandibular anterior teeth. Conclusions : The initial tooth displacement can vary according to different distalization strategies for CAT-based total distalization. Discreet application and biomechanical understanding of traction sites and directions are necessary for appropriate mandibular total distalization.
Collapse
|
23
|
Does maxillary sinus proximity affect molar root resorption during distalization using Invisalign? a CBCT study. BMC Oral Health 2023; 23:905. [PMID: 37990186 PMCID: PMC10664583 DOI: 10.1186/s12903-023-03672-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/04/2023] [Accepted: 11/15/2023] [Indexed: 11/23/2023] Open
Abstract
BACKGROUND This study aimed to assess the correlation between maxillary sinus proximity to root apices of maxillary molars and root resorption during molar distalization using clear aligner therapy (CAT). MATERIALS AND METHODS Thirty-eight cone beam computed tomography scans (CBCTs) obtained pre- (T0) and post-treatment (T1) from 19 adult patients (36.68 ± 13.50 years), who underwent maxillary molar distalization using Invisalign® aligners (Align Technology, Inc., San José, CA, USA) with a minimum of 2 mm distalization, were evaluated in this study At least 22 h of aligner wear per day was a main inclusion criterion. Sinus proximity and changes in root lengths were measured for 61 molars (183 roots). Spearman coefficient analysis was used for assessing correlation between sinus proximity and root resorption. The level of significance was set at p ≤ 0.05. The reproducibility of measurements was assessed by intraclass correlation coefficient (ICC). RESULTS Spearman coefficient revealed no significant correlation between sinus proximity and molar root resorption for mesiobuccal, distobuccal or palatal roots (p = 0.558, p = 0.334, p = 0.931, respectively). CONCLUSION There was no correlation between maxillary sinus proximity to root apices of maxillary molars and root resorption.
Collapse
|
24
|
Effects of upper arch expansion using clear aligners on different stride and torque: a three-dimensional finite element analysis. BMC Oral Health 2023; 23:891. [PMID: 37986060 PMCID: PMC10662809 DOI: 10.1186/s12903-023-03655-y] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/15/2023] [Accepted: 11/10/2023] [Indexed: 11/22/2023] Open
Abstract
BACKGROUND During maxillary arch expansion with a clear aligner (CA), buccal tipping of the posterior teeth often occurs, resulting in an unsatisfactory arch expansion effect. The aim of this study was to analyze the appropriate maxillary arch expansion stride length and torque compensation angle for maxillary dentition to achieve an ideal moving state when a CA was used for upper arch expansion. METHODS This study established a three-dimensional (3D) finite element model including a CA, maxilla, periodontal ligament (PDL), and maxillary dentition. The stress distribution, stress situation, expansion efficiency, and movement trends of the maxillary dentition during upper arch expansion of different stride (0.1 mm, 0.2 mm, and 0.3 mm) and torque compensation (0°, 0.5°, 1°, and 1.5°) were measured. RESULTS Maxillary arch expansion lead to buccal tilt of the posterior teeth, lingual tilt of the anterior teeth, and extrusion of the incisors. As the angle of compensation increased, the degree of buccal tilt on the posterior teeth decreased, with this reducing the efficiency of upper arch expansion. When the stride length was 0.1 mm, the torque compensation was 1.2°, and when stride length was 0.2 mm and the torque compensation was approximately 2°, there was a tendency for the posterior teeth to move bodily. However, when the stride length was 0.3 mm, the increase in torque compensation could not significantly improve the buccal tilt phenomenon. In addition, the equivalent von-Mises stress values of the maxillary root, PDL, and alveolar bone were in the same order of magnitude. CONCLUSIONS This study indicated that the posterior teeth cause a degree of buccal tilt when maxillary arch expansion is ensured. The specific torque compensation angle should be determined based on the patient's situation and the desired effect.
Collapse
|
25
|
Three-dimensional finite element analysis of retracting pathological migration of the right upper central incisor with a clear aligner. Comput Methods Biomech Biomed Engin 2023:1-8. [PMID: 37936535 DOI: 10.1080/10255842.2023.2279011] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/27/2023] [Accepted: 10/23/2023] [Indexed: 11/09/2023]
Abstract
We aimed to explore the best orthodontic step distance of the right upper central incisor with mild, moderate, and severe pathological displacement achieved via a clear aligner. Three-dimensional models of maxilla-tooth-periodontal ligament clear aligner of the right upper central incisors with five different steps of 0.1, 0.125, 0.15, 0.165, 0.25 mm and three different alveolar bone heights were established via finite element analysis. We analysed the changing trends in initial displacement, the periodontal ligament, the alveolar bone, and apical stress of right upper central incisor. In the process of retraction, the right upper central incisor a movement trend of the crown deviating from the distal root to the mesial, and with the decrease of the height of the alveolar bone and the increase of the displacement, the crown would appear distal labial torsion with a deepening trend of vertical overlay.The maximum stress distribution of the periodontal ligament and alveolar bone showed a positive correlation. The overall stress distribution of the periodontal ligament and apical stress increased with decrease of alveolar bone height and the increase of alveolar bone displacement. In patients with mild, moderate, and severe pathological displacement of the right upper central incisor, the best step distance of anterior tooth retraction is 0.165, 0.15, and 0.125 mm, respectively.
Collapse
|
26
|
Characteristics of oral microbiota and oral health in the patients treated with clear aligners: a prospective study. Clin Oral Investig 2023; 27:6725-6734. [PMID: 37775585 DOI: 10.1007/s00784-023-05281-y] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/24/2023] [Accepted: 09/24/2023] [Indexed: 10/01/2023]
Abstract
OBJECTIVES In this prospective clinical study, the effect of clear aligners on periodontal health and oral hygiene was examined. As the same time, microbial changes of the aligner tray and subgingival microbiota community were investigated. METHODS The study recruited fifteen patients, and clinical parameters were recorded at three different time points: before the initiation of aligner treatment (T0), 1 month after treatment onset (T1), and 3 months after treatment onset (T3). Plaque samples were collected from the inner surface of aligners and subgingival sulcus at each of these time points. The microbial composition of the samples was analyzed using 16S rRNA gene sequencing, and changes were evaluated based on the abundance of amplicon sequence variants (ASVs). RESULTS Reduction in plaque index and improvement in periodontal health were observed. In aligner tray plaque samples, the relative abundance of Streptococcus increased significantly, as well as the richness and diversity of microbiota decreased substantially as the duration of treatment time. In subgingival plaque samples, alpha and beta diversity of microbiota did not change significantly. CONCLUSIONS During the clear aligner treatment, the patients' periodontium remained in a healthy condition, and clear aligner treatment had no significant impact on the composition of subgingival microbiota. The structure of the aligner tray microbiota altered significantly at both phylum and genus levels and attracted a unique and less diverse microbiota community. CLABSINABSICAL RELEVANCE Clear aligner treatment has no significant impact on periodontal health and subgingival microbiota composition of patients.
Collapse
|
27
|
Evaluation of bisphenol release of different clear aligner materials using the liquid chromatography-mass spectrometry/mass spectrometry method. Angle Orthod 2023; 93:721-726. [PMID: 37539687 PMCID: PMC10633800 DOI: 10.2319/010923-17.1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/01/2023] [Accepted: 06/01/2023] [Indexed: 08/05/2023] Open
Abstract
OBJECTIVES To evaluate the bisphenol release of different brands of clear aligner materials. MATERIALS AND METHODS Six different clear aligner materials were used in this study: Duran (Scheu-Dental GmbH, Iserlohn, Germany), Zendura Flx (Bay Materials LLC, Fremont, CA, USA), Zendura A (Bay Materials), Essix (Raintree Essix Inc., Metairie, LA, USA), Taglus Premium (Laxmi Dental Export Pvt. Ltd, Mumbai, India), and Smart Track (Align Technology, San Jose, CA, USA). The samples were kept in saline solution for 8 weeks in airtight test tubes at 37°C. The ratio between the weights of the samples and the volumes of the dilutions was prepared as 0.1 g/mL as suggested by International Standards Organization parameters. To evaluate the bisphenol release of materials, liquid chromatography-mass spectrometry/mass spectrometry analysis was performed. Data were analyzed with the Kruskal-Wallis test (α = 0.05). RESULTS Bisphenol A (BPA) values in Smart Track were found to be significantly higher than the Zendura A and Zendura Flx groups (P = .02, P = .03, respectively). There was no statistically significant difference among the samples in terms of Bisphenol F (BPF) values (P = .108). In terms of Bisphenol S (BPS) values, a statistically significant difference was found (P = .002) indicating that Smart Track released significantly more BPS than Zendura A (P = .001). CONCLUSIONS Under the test conditions, the amounts of leached BPA, BPF, and BPS were less than the reference dose for daily intake. However, the cumulative effect of these appliances should not be underestimated.
Collapse
|
28
|
Outcome assessment of orthodontic clear aligner vs fixed appliance treatment in adolescents with moderate to severe malocclusions. Angle Orthod 2023; 93:644-651. [PMID: 37407511 PMCID: PMC10633795 DOI: 10.2319/020923-94.1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/01/2023] [Accepted: 05/01/2023] [Indexed: 07/07/2023] Open
Abstract
OBJECTIVE To compare the efficacy and efficiency of treatment with clear aligners (CAT) vs fixed appliances (FAT) in adolescents with Class I and II moderate to severe malocclusions. MATERIALS AND METHODS One operator's (Garfinkle) cases from 2014 to 2019, started at age 12-18 years, with pre- and posttreatment records were identified and used according to an institutional review board-approved protocol. Records were measured by two calibrated, blinded investigators, aided by software (OrthoCAD [Cadent, Fairview, N.J.], Dolphin Imaging & Management Solutions [Chatsworth, Calif]). Discrepancy index (DI) and cast radiograph evaluation (CRE) scores, treatment duration, number of scheduled and emergency visits, and reported appliance and interarch elastic wear compliance were compared between groups using Wilcoxon rank sum and Fisher's exact tests. Cephalometric superimpositions were completed to evaluate craniofacial growth and dental changes. RESULTS Records from 72 cases met the criteria and were included. For the 47 CAT and 25 FAT cases, mean DI (21 ± 5 and 24 ± 8, respectively; P = .20) and CRE (35 ± 10 and 34 ± 9, respectively; P = .90) scores were not significantly different. Other case attributes and reported appliance and interarch elastic wear compliance were also not significantly different. CAT vs FAT cases had significantly smaller treatment durations (24 ± 6 vs 27 ± 5 months; P = .01) and visit numbers (16 ± 5 vs 24 ± 4; P < .01), but emergency visit numbers were not significantly different (2 ± 2 vs 3 ± 2; P = .08). CONCLUSIONS In adolescents with Class I and II malocclusions and moderate to severe DI scores, on average, CAT vs FAT cases were completed 3 months faster with eight fewer visits, but treatment efficacy was not significantly different.
Collapse
|
29
|
In vitro evaluation of a novel fluoride-coated clear aligner with antibacterial and enamel remineralization abilities. Clin Oral Investig 2023; 27:6027-6042. [PMID: 37620439 DOI: 10.1007/s00784-023-05216-7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/27/2022] [Accepted: 08/14/2023] [Indexed: 08/26/2023]
Abstract
OBJECTIVE To investigate the antibacterial and enamel remineralization performances as well as physicochemical properties and biocompatibility of a fluoride-coated clear aligner plastic (FCAP). MATERIALS AND METHODS FCAP and normal clear aligner plastic (CAP) was bought from the manufacturer (Angelalign Technology Inc, China). The FCAP was observed under scanning electron microscopy. Its element composition, resistance to separation, contact angle, and protein adhesion performance were characterized. Colony-forming unit (CFU) count and 3-(4,5)-dimethylthiazol(-z-y1)-3,5-diphenyltetrazolium bromide (MTT) assay were used to evaluate the antibacterial ability of Streptococcus mutans. Fluoride release-recharge patterns were obtained. Apatite formation was evaluated after immersing FCAP in artificial saliva. Enamel remineralization capability was evaluated in the demineralization model (immersing samples in demineralization solution for 36 h) and pH cycling model (immersing samples in demineralization solution and remineralization solution in turns for 14 days). Cell Counting Kit-8 (CCK-8) and live/dead cell staining kits were used for cytotoxicity assay. RESULTS The FCAP showed uniformly distributed fluoride and did not compromise protein adhesion performance. CFU count (5.47 ± 0.55 for CAP, 3.63 ± 0.38 for FCAP) and MTT assay (0.41 ± 0.025 for CAP, 0.28 ± 0.038) indicated that the FCAP had stronger antibacterial activity compared with normal CAP (P < 0.05 for both evaluations). The FCAP could release fluoride continuously for 14 days and could be recharged after immersing in NaF solution. The FCAP could induce the formation of hydroxyapatite in artificial saliva and could reduce the microhardness decrease, color change, and mineral loss of enamels in both two models (P < 0.05 for all evaluations). CCK-8 and live/dead cell staining analyses showed that the coating did not compromise the biocompatibility of the clear aligner (P > 0.05 for CCK-8 evaluation). CONCLUSIONS The FCAP had antibacterial, fluoride recharge, and enamel remineralization abilities while it did not compromise physicochemical properties and biocompatibility. CLINICAL RELEVANCE The FCAP has the potential to prevent enamel demineralization during clear aligner treatment.
Collapse
|
30
|
Impact of Clear Aligners on Oral Health and Oral Microbiome During Orthodontic Treatment. Int Dent J 2023; 73:603-611. [PMID: 37105789 PMCID: PMC10509397 DOI: 10.1016/j.identj.2023.03.012] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/23/2022] [Revised: 03/19/2023] [Accepted: 03/27/2023] [Indexed: 04/29/2023] Open
Abstract
The demand for clear aligners has risen over the past decade because they satisfy patients' desire for less noticeable and more comfortable orthodontic appliances. Because clear aligners are increasingly used in orthodontics, there is a big push to learn more about the physiologic and microbial changes that occur during treatment. The present work highlighted further links between clear aligners and changes in oral health and the oral microbiome and provided plaque control methods for clear aligner trays. Existing literature revealed that clear aligners have no significant influence on the structure of the oral microbiome during orthodontic therapy. Clear aligner treatment demonstrated promising results in terms of controlling plaque index, gingival health, and the prevalence of white spot lesions. Nevertheless, grooves, ridges, microcracks, and abrasions on the aligner surface would provide a prime environment for bacterial adherence and the development of plaque biofilms. A combination of mechanical and chemical methods seems to be a successful approach for removing plaque biofilm from aligners whilst also preventing pigment adsorption.
Collapse
|
31
|
The effect of space arrangement between anterior teeth on their retraction with clear aligners in first premolar extraction treatment: a finite element study. Prog Orthod 2023; 24:39. [PMID: 37747552 PMCID: PMC10519906 DOI: 10.1186/s40510-023-00484-1] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/27/2023] [Accepted: 08/03/2023] [Indexed: 09/26/2023] Open
Abstract
INTRODUCTION Clear aligner therapy has become increasingly popular in recent years, although it has encountered several difficulties in premolar extraction treatment. These difficulties include anterior dentition, lingual tipping and extrusion. The design of the present clinical scheme usually set a tiny space between the anterior teeth before retraction in order to obtain an ideal outcome. The objective of our research was to analyze the effect of the existing spaces during retraction. METHODS Models including maxillary dentition without first premolars, maxilla, periodontal ligaments, gingiva, or aligners were constructed and imported to an ANSYS workbench. Five groups of models were created: without spaces and with 0.25, 0.50, 0.75 and 1.00 mm spaces between the anterior dentition. A 0.20 mm retraction step was applied to all the groups. RESULTS As the spaces between the anterior dentition increased, the bowing effect of the aligner caused by the passive forces decreased gradually. Accordingly, the degree of extrusion of the anterior dentition was alleviated significantly, while sagittal movement was reduced. However, the overall movement tended to be a bodily displacement rather than tipping. Meanwhile, maximum Von Mises stress of the periodontal ligaments (PDLs) was markedly decreased. CONCLUSION These analyses indicate that spaces between the anterior dentition during anterior retraction are beneficial for decreasing the tendency for extrusion of the anterior dentition and require provision of anchorage. Appropriate spaces can be designed to lest the lingual tipping and extrusion effect of the anterior teeth while simultaneously reducing the maximum stresses on PDLs.
Collapse
|
32
|
Expansion rebound deformation of clear aligners and its biomechanical influence: a three-dimensional morphologic analysis and finite element analysis study. Angle Orthod 2023; 93:572-579. [PMID: 37068033 PMCID: PMC10575640 DOI: 10.2319/102622-734.1] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/01/2022] [Accepted: 03/01/2023] [Indexed: 04/18/2023] Open
Abstract
OBJECTIVES To determine the expansion rebound deformation (ERD) of clear aligners (CAs) and its biomechanical influence. MATERIALS AND METHODS A four-premolar extraction treatment plan was carried out for a patient with 2 CA companies. Thirty-six digitally scanned clear aligners with the corresponding 36 virtually constructed "ideal" aligners were constructed. The arch width and length between pairs of reference landmarks of the scanned CAs and corresponding dentition models were measured. Cone-beam computed tomography data and digital dental models were used for three-dimensional (3D) finite element analysis (FEA) modeling. Thirty-six scanned CA models with the corresponding 36 ideal CA models were constructed. One-way analysis of variance was used to determine the differences among deviation values at tooth level, and paired t-test was used to compare the displacements of teeth between the two group of CAs. RESULTS All CAs were wider and shorter than the digital model from which they were constructed. In the scanned CA model group, significant stress was observed in the buccolingual area of the periodontal ligament on posterior teeth, and the corresponding displacements of teeth were also noted. Significantly larger coronal displacements were noted for the lateral incisor, the canine, the second premolar, and the first molar in the scanned CA group (P < .05). CONCLUSIONS The general trend of ERD of thermoformed CAs was shown. This deformation may cause unforeseen tooth movements and negatively affect treatment outcomes.
Collapse
|
33
|
The incidence and severity of open gingival embrasures in adults treated with clear aligners and fixed appliances: a retrospective cohort study. Head Face Med 2023; 19:30. [PMID: 37461116 DOI: 10.1186/s13005-023-00375-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/02/2023] [Accepted: 06/30/2023] [Indexed: 07/20/2023] Open
Abstract
BACKGROUND To evaluate the incidence and severity of open gingival embrasures (OGEs) in adult patients treated with clear aligners and fixed appliances. METHODS Two hundred non-extraction adult subjects with less than 5 mm of crowding (mean age, 24.6 ± 3.8 years) were enrolled in this retrospective study. The subjects were divided into the clear aligner (n = 100) and fixed appliance group (n = 100). The intraoral photographs were utilized to determine the incidence of OGEs in the upper arch between maxillary central incisors, as well as the lower arch between mandibular central incisors. Crown overlap, crown shape, posttreatment root angulation, the distance from the interproximal contact point (ICP) to the alveolar bone crest (ABC) after treatment and interproximal enamel reduction (IPR) were determined in the two groups. RESULTS The incidence of OGEs between maxillary and mandibular central incisors after orthodontic treatment was 35.0% and 38.0% in the clear aligner group, respectively, significantly higher than that (18.0% and 24.0%) in the fixed appliance group (P < 0.05). The average area of an OGE after clear aligner treatment was larger both in the maxilla (0.16 ± 0.12mm2) and mandible (0.21 ± 0.24mm2) compared with that (0.05 ± 0.03mm2 and 0.05 ± 0.06mm2) after fixed appliance treatment (P < 0.05). No difference was found regarding pretreatment crown overlap, crown shape, treatment duration, posttreatment root angulation, amount and distribution of IPR and the distance from ICP to ABC. CONCLUSIONS The incidence and severity of OGEs were higher in adults treated with clear aligners. Clinicians should be aware of the risk of OGEs during treatment with clear aligners.
Collapse
|
34
|
Relative anchorage loss under reciprocal anchorage in mandibular premolar extraction cases treated with clear aligners. Angle Orthod 2023; 93:375-381. [PMID: 37343197 PMCID: PMC10294577 DOI: 10.2319/102222-727.1] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/01/2022] [Accepted: 02/01/2023] [Indexed: 03/25/2024] Open
Abstract
OBJECTIVES To compare mandibular relative anchorage loss (RAL) under reciprocal anchorage between first and second premolar extraction cases in bimaxillary protrusion mild crowding cases treated using clear aligner therapy (CAT). MATERIALS AND METHODS Adult patients who met the following criteria were included: treated using CAT with bilateral mandibular premolar extractions and space closure using intra-arch reciprocal anchorage. RAL was defined as the percent molar mesial movement relative to the sum of molar mesial plus canine distal movement. Movements of the mandibular central incisor (L1), canine (L3), and first molar (L6) were measured based on superimposition of the pre- and post-treatment dentition and jaw models. RESULTS Among the 60 mandibular extraction quadrants, 38 had lower first premolar (L4) and 22 had lower second premolar (L5) extracted. L6 mesial movement was 2.01 ± 1.11 mm with RAL of 25% in the L4 extraction group vs 3.25 ± 1.19 mm with RAL of 40% in the L5 extraction group (P < .001). Tooth movement efficacy was 43% for L1 occlusogingival movement, 75% for L1 buccolingual inclination, 60% for L3 occlusogingival movement, and 53% for L3 mesiodistal angulation. L1 had unwanted extrusion and lingual crown torquing whereas L3 had unwanted extrusion and distal crown tipping, on which the power ridges or attachments had little preventive effect. CONCLUSIONS The average mandibular reciprocal RAL is 25% or 40% for extraction of L4 or L5, respectively, in CAT cases. A RAL-based treatment planning workflow is proposed for CAT extraction cases.
Collapse
|
35
|
Effects of different designs of orthodontic clear aligners on the maxillary central incisors in the tooth extraction cases: a biomechanical study. BMC Oral Health 2023; 23:416. [PMID: 37349701 PMCID: PMC10288704 DOI: 10.1186/s12903-023-03106-8] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/14/2022] [Accepted: 06/05/2023] [Indexed: 06/24/2023] Open
Abstract
BACKGROUND Controlling the 3D movement of central incisors during tooth extraction cases with clear aligners is important but challenging in invisible orthodontic treatment. This study aimed to explore the biomechanical effects of central incisors in tooth extraction cases with clear aligners under different power ridge design schemes and propose appropriate advice for orthodontic clinic. METHODS A series of Finite Element models was constructed to simulate anterior teeth retraction or no retraction with different power ridge designs. These models all consisted of maxillary dentition with extracted first premolars, alveolar bone, periodontal ligaments and clear aligner. And the biomechanical effects were analysed and compared in each model. RESULTS For the model of anterior teeth retraction without power ridge and for the model of anterior teeth no retraction with a single power ridge, the central incisors exhibited crown lingual inclination and relative extrusion. For the model of anterior teeth no retraction with double power ridges, the central incisors tended to have crown labial inclination and relative intrusion. For the model of anterior tooth retraction with double power ridges, the central incisors exhibited a similar trend to the first kind of model, but as the depth of the power ridge increased, there was a gradual decrease in crown retraction value and an increase in crown extrusion value. The simulated results showed that von-Mises stress concentration was observed in the cervical and apical regions of the periodontal ligaments of the central incisors. The clear aligner connection areas of adjacent teeth and power ridge areas also exhibited von-Mises stress concentration and the addition of power ridge caused the clear aligner to spread out on the labial and lingual sides. CONCLUSIONS The central incisors are prone to losing torque and extruding in tooth extraction cases. Double power ridges have a certain root torque effect when there are no auxiliary designs, but they still cannot rescue tooth inclination during tooth retraction period. For tooth translation, it may be a better clinical procedure to change the one-step aligner design to two-step process: tilting retraction and root control.
Collapse
|
36
|
Clear Aligner Orthodontics: What is the Evidence for their Efficacy? Prim Dent J 2023; 12:69-75. [PMID: 37313874 DOI: 10.1177/20501684231174122] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Orthodontic treatment with the Invisalign® appliance (and other clear aligners) may be more aesthetically appealing to most adult patients when compared with conventional fixed appliances. When the first clear aligner systems were introduced into the market some 20 years ago, they were very basic in their mode of force delivery. In the last ten years, the Invisalign® system has undergone some remarkable changes and refinements in order to deliver more predictable treatment outcomes and allow for the treatment of more complex malocclusions. However, there remains an issue in terms of differences between the predicted and achieved tooth movements. Some tooth movements are more difficult to achieve than others. This article aims to examine the evidence of effectiveness and predictability of Invisalign® appliances for the correction of different tooth movements.
Collapse
|
37
|
The effect of maxillary molar distalization with clear aligner: a 4D finite-element study with staging simulation. Prog Orthod 2023; 24:16. [PMID: 37183221 PMCID: PMC10183381 DOI: 10.1186/s40510-023-00468-1] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/27/2022] [Accepted: 04/08/2023] [Indexed: 05/16/2023] Open
Abstract
INTRODUCTION Long-term simulation of tooth movement is crucial for clear aligner (CA) treatment. This study aimed to investigate the effect of maxillary molar distalization with CA via an automatic staging simulation. METHOD A finite-element method (FEM) model of maxillary dentition, periodontal ligaments, attachments, and corresponding CA was established, and a prescribed 2-mm distalization with 0.1 mm each step of the second molar was simulated. The long-term tooth movement under orthodontic force was simulated with an iterative computation method. The morphologic changes of CA during staging were simulated with the thermal expansion method. RESULTS Twenty steps of molar distalization were simulated. Significant distal tilting of the second molar was revealed, along with the proclination of anterior teeth, which caused the 'reversed bow effect'. For the second molar, 4.63°distal tilting at the 20th step was revealed. The intrusion of the incisors and the second molar were 0.43 mm, 0.39 mm, and 0.45 mm, respectively, at step 20. All the anterior teeth showed a proclination of approximately 1.41°-2.01° at the 20th step. The expression rate of the designed distalization of the second molar was relatively low (approximately 68%) compared to the high efficacy of interdental space opening between molars with CA (approximately 89%). CONCLUSION A novel method of simulating long-term molar distalization with CA with FEM was developed. The FEM results suggested distal tilting of the second molar and the proclination of anterior teeth during the molar distalization.
Collapse
|
38
|
Using digital image correlation to measure displacement and strain during involving distal movement of anterior teeth with clear aligner. Dent Mater J 2023. [PMID: 37121736 DOI: 10.4012/dmj.2022-255] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/02/2023]
Abstract
To investigate methods to suppress the bowing effects of lingual inclination and anterior tooth extrusion, digital image correlation (DIC) was used to evaluate aligner displacement in three-dimensions through comparing the distal movement of six and four anterior teeth. Computed tomography scans were used to measure aligner thickness and shape. Based on displacement direction and magnitude, a desirable deformation mode with minimal lingual inclination and extrusion was observed during distal movement of four anterior teeth. The aligner had a rigid "constriction zone" between the lateral incisor and the canine, facilitating control localized to the anterior teeth and minimizing the reaction of the molars. The mechanical behavior of aligners was greatly affected by the method of anterior teeth movement and the shape of aligners. DIC-based displacement measurements are useful in investigating correction directionality.
Collapse
|
39
|
Effectiveness and predictability of treatment with clear orthodontic aligners: A scoping review. Int Orthod 2023; 21:100755. [PMID: 37086643 DOI: 10.1016/j.ortho.2023.100755] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/24/2022] [Revised: 03/08/2023] [Accepted: 03/10/2023] [Indexed: 04/24/2023]
Abstract
INTRODUCTION In an ideal clinical setting, orthodontic therapy with clear aligners (CA) should improve the patients' initial malocclusion and must guarantee equivalence between the results predicted and those obtained clinically to be considered an effective treatment. Therefore, this scoping review aimed to identify the orthodontic literature concerning the effectiveness and predictability of CA treatments. METHODS A systematic computerized search was performed in 3 databases: PubMed, Scopus, and Embase. Inclusion criteria selected observational and clinical studies performed in at least 10 adult orthodontic patients, whose results of CA treatment's effectiveness and/or predictability were assessed. RESULTS The 3 database computerized searches resulted in 1,553 articles, and 169 full texts were considered potentially relevant. After applying the eligibility criteria, 33 studies were included. Most studies (76%) were designed as cohort studies and have been published in the last 5 years (79%). The majority included only non-extraction treatments (73%), and 79% reported results achieved with the Invisalign® system. The most predictable movement was the buccolingual tipping, while the least predictable movements were rotation, intrusion, and extrusion. Aligner treatment was effective for mild to moderate crowding resolution, and the success of overbite correction still seems to be limited. CONCLUSIONS The studies have demonstrated improvement of initial malocclusion through CA treatments. Still, predictability degree is overestimated and does not accurately reflect the occlusion immediately at the end of treatment. In future studies, there should be an effort to broaden the utilization of alternative aligner systems beyond Invisalign® and broadly disseminate their outcomes to strengthen clear aligners evidence base.
Collapse
|
40
|
Effectiveness of clear aligners in achieving proclination and intrusion of incisors among Class II division 2 patients: a multivariate analysis. Prog Orthod 2023; 24:12. [PMID: 37009943 PMCID: PMC10068686 DOI: 10.1186/s40510-023-00463-6] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/05/2022] [Accepted: 03/14/2023] [Indexed: 04/04/2023] Open
Abstract
BACKGROUND The predictability of incisor movement achieved by clear aligners among Class II division 2 patients is poorly understood. The aim of this retrospective study was to determine the effectiveness of clear aligners in proclining and intruding upper incisors and its influencing factors. METHODS Eligible patients with Class II division 2 malocclusion were included. For clear aligner therapy, three types of incisor movements were designed: proclination, intrusion and labial movement. Pre-treatment and post-treatment dental models were superimposed. The differences between predicted and actual (DPA) tooth movement of incisors were analyzed. Univariate and multivariate linear regression were used to analyze the potential influencing factors. RESULTS A total of 51 patients and their 173 upper incisors were included. Actual incisor proclination and intrusion were less than predicted ones (both P < 0.001), while actual labial movement was greater than predicted one (P < 0.001). Predictability of incisor proclination and intrusion was 69.8% and 53.3%, respectively. Multivariate linear regression revealed that DPA of proclination was significantly positively associated with predicted proclination (B = 0.174, P < 0.001), ipsilateral premolar extraction (B = 2.773, P < 0.001) and ipsilateral canine proclination (B = 1.811, P < 0.05), while negatively associated with molar distalization (B = - 2.085, P < 0.05). The DPA of intrusion was significantly positively correlated with predicted intrusion (B = 0.556, P < 0.001) while negatively associated with labial mini-implants (B = - 1.466, P < 0.001). The DPA of labial movement was significantly positively associated with predicted labial movement (B = 0.481, P < 0.001), while negatively correlated with molar distalization (B = - 1.004, P < 0.001), labial mini-implants (B = - 0.738, P < 0.001) and age (B = - 0.486, P < 0.05). CONCLUSIONS For Class II division 2 patients, predicted incisor proclination (69.8%) and intrusion (53.3%) are partially achieved with clear aligner therapy. Excessive labial movement (0.7 mm) of incisors may be achieved. Incisor movement is influenced by predicted movement amount, premolar extraction, canine proclination, molar distalization, mini-implants and age.
Collapse
|
41
|
An in vivo evaluation of clear aligners for optimal orthodontic force and movement to determine high-efficacy and periodontal-friendly aligner staging. Heliyon 2023; 9:e15317. [PMID: 37113787 PMCID: PMC10126945 DOI: 10.1016/j.heliyon.2023.e15317] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/07/2022] [Revised: 03/15/2023] [Accepted: 04/03/2023] [Indexed: 04/29/2023] Open
Abstract
Objectives To investigate the effect of aligner displacement on tooth movement and periodontal health to improve the efficiency of aligner treatment and explore the mechanism in vivo. Methods A two-tooth site was established by a finite element (FE) model to virtually evaluate aligner staging. A randomized controlled experiment was conducted when the tooth sites in beagles were treated with fixed or aligner appliances with different movement and force, and tooth movement and internal structure were recorded during the alignment. After sacrificing five dogs, bone-periodontal ligament (PDL)-tooth specimens were removed and processed to conduct uniaxial compression and tensile tests as well as micro-CT imaging and histological analysis. Results Three displacements of 0.25, 0.35 and 0.45 mm were obtained from FE analysis and applied in beagles. In general, aligners had poorer performance on movement compared to fixed systems in vivo, but the aligner with a staging of 0.35 mm had the highest accuracy (67.46%) (P < 0.01). Loaded with severe force, fixed sites exhibited tissue damage due to excess force and rapid movement, while aligners showed better safety. The PDL under a 0.35-mm aligner treatment had the highest elastic modulus in the biomechanical test (551.4275 and 1298.305 kPa) (P < 0.05). Conclusions Compared to fixed appliances, aligners achieve slightly slower movement but better periodontal condition. Aligners with an interval of 0.35 mm have the highest accuracy and best PDL biomechanical and biological capacities, achieving the most effective and safest movement. Even with complexity of oral cavity and lack of evaluation of other factors, these results provide insight into faster displacement as a method to improve the efficacy of aligners.
Collapse
|
42
|
Effects of different distalization directions and methods on maxillary total distalization with clear aligners: a finite element study. Angle Orthod 2023; 93:490510. [PMID: 36719258 PMCID: PMC10117206 DOI: 10.2319/072622-519.1] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/01/2022] [Accepted: 12/01/2022] [Indexed: 02/01/2023] Open
Abstract
OBJECTIVES To analyze the effects of maxillary tooth distalization by clear aligner (CA) treatment with variations in the angular direction of the distalization force, presence of attachments, and force-application method used. MATERIALS AND METHODS A finite element model containing alveolar bone, dentition, and periodontal ligament was constructed. Analytical model groups were as follows: (1) distalization with buttons (without attachments), (2) buttons on canines (with attachments), (3) precision cuts on the canines (without attachments), and (4) precision cuts on the canines (with attachments). A distalization force of 1.5 N was applied to the button or precision cut at -30°, -20°, -10°, 0°, 10°, 20°, and 30° to the occlusal plane. RESULTS As the direction of force approached +30°, the dentition inclined posteriorly. The posterior movement pattern was significantly influenced by the presence of an attachment and the direction of force, rather than the area where the force was applied. Distal inclination was dramatically reduced with attachments. A disengagement or deformation of the CA may reduce the distalization efficiency of the dentition or move the dentition in an inappropriate direction. CONCLUSIONS Attachments for efficient distalization by the CA are necessary. The use of miniscrews in the direction of force parallel to the occlusal plane is more advantageous than the use of Class II elastics. Due to CA deformation, distalization with the button on the canines can be more effective for distal movement of the maxillary dentition.
Collapse
|
43
|
Torque movement of the upper anterior teeth using a clear aligner in cases of extraction: a finite element study. Prog Orthod 2022; 23:26. [PMID: 35909188 PMCID: PMC9339452 DOI: 10.1186/s40510-022-00421-8] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/23/2022] [Accepted: 05/30/2022] [Indexed: 11/10/2022] Open
Abstract
Background Clear aligner treatment has become popular over recent years. It is necessary to identify methods by which we could avoid the bowing effect in extractions with clear aligner. The present study was to identify the appropriate method to design torque movement involving the upper anterior teeth of extraction cases, in order to maintain or improve the axis and torque of the upper anterior teeth with a clear aligner during movement and closure of the extraction space. Results As the height of the power ridge increased, the rotation angle of the upper central incisor in the sagittal direction decreased gradually and the location of the rotation center changed significantly; the rotation center moved in the apical direction and then changed to the crown side. The highest von-Mises stress of the upper central incisor root, periodontal ligaments, and alveolar bone, showed little change as the power ridge height increased. When the axial inclination of the upper central incisor was normal (U1-SN = 105°), the tendency of movement for the upper central incisor approached translation with a power ridge height of 0.7 mm (corresponding distorted angle: 5.8415). When the axial inclination of the upper central incisor was oversized (U1-SN = 110°), the axial inclination of the upper central incisor reduced to normal following completion of the anterior segment retraction with a power ridge of 0.4 mm (corresponding distorted angle: 3.4265). Conclusion Analysis indicates that pure palatal tipping movement of the upper anterior teeth is generated without torque control, thus resulting in the bowing effect. The required torque control of the upper anterior teeth with oversize axial inclination is weaker than that of the upper anterior teeth with normal axial inclination because limited torque loss is expected for oversize axial inclination teeth. Variation sensitivity of the rotation center should be considered carefully due to biological problems when designing translation of the upper anterior teeth with normal axial inclination.
Collapse
|
44
|
Sequential soft- and hard-tissue augmentation after clear aligner-mediated adjustment of traumatic occlusion: A case report. J Am Dent Assoc 2022; 153:572-581.e1. [PMID: 35241272 DOI: 10.1016/j.adaj.2021.11.004] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/23/2020] [Revised: 10/10/2021] [Accepted: 11/14/2021] [Indexed: 12/12/2022]
Abstract
BACKGROUND Oral health and esthetic concerns have increasingly motivated adults with periodontitis to seek orthodontic care. Patients with periodontitis often have other dental complications that can make treatment more challenging or less likely to be successful. The predictability of multidisciplinary regenerative and orthodontic treatment approaches in a patient with periodontitis, thin periodontal phenotype, and anterior crossbite is described. CASE DESCRIPTION A 35-year-old man was designated as having a high risk of experiencing soft-tissue recession owing to his thin periodontal phenotype. After the initial periodontal therapy, clear aligners were used to eliminate the anterior crossbite that was causing traumatic occlusion. In addition, a subepithelial connective tissue graft was used to alter the thin periodontal phenotype. Three months later, guided bone regeneration with corticotomy was performed to increase bone mass, and orthodontic traction was used at 2 weeks after surgery. Orthodontic treatment was continued until all the spaces had been closed. Clinical and radiographic evaluations conducted at the 6-month follow-up revealed substantial improvements in both the soft- and hard-tissue phenotypes. PRACTICAL IMPLICATIONS Outcomes in this case indicate that sequential soft- and hard-tissue augmentation, after eliminating traumatic occlusion via using a clear aligner, may be a valuable approach for improving soft- and hard-tissue support in patients with periodontitis.
Collapse
|
45
|
Clinical effectiveness of clear aligner treatment compared to fixed appliance treatment: an overview of systematic reviews. Clin Oral Investig 2022; 26:2353-2370. [PMID: 34993617 DOI: 10.1007/s00784-021-04361-1] [Citation(s) in RCA: 29] [Impact Index Per Article: 14.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/24/2021] [Accepted: 12/29/2021] [Indexed: 11/03/2022]
Abstract
OBJECTIVE To evaluate the available evidence regarding clinical effectiveness of clear aligner treatment (CAT). MATERIALS AND METHODS A comprehensive literature search was conducted for systematic reviews investigating effectiveness of CAT published up to July 15, 2021. This was accomplished using different electronic databases. No language restriction was applied. Screening, quality assessment, and data extraction were performed by two authors independently. Information was categorized and narratively synthesized for the key findings from moderate and high-quality reviews. RESULTS A total of 361 potentially eligible reviews were identified. After excluding the non-relevant/low-quality reviews, 18 systematic reviews were included. CAT was found to be effective for mild to moderate malocclusions, and was associated with inferior outcomes when treating severe cases or with achieving specific tooth movements. There were conflicting results regarding treatment duration; however, CAT may be associated with shorter treatment in mild to moderate cases. Relapse was greater with CAT, while periodontal health was better. The risk of root resorption tended to be lower with CAT. Regarding pain, the results were unclear, although CAT was found to be more comfortable and associated with a reduced impact on eating and chewing. CONCLUSIONS The level of evidence regarding CAT is moderate; hence, further high-quality randomized clinical trials are required. Evidence supports use of aligners as an alternate to fixed appliances in patients with mild-to-moderate malocclusion but not in severe cases. Advancement in technology could enhance the accuracy of CAT in delivering planned outcomes. CLINICAL RELEVANCE CAT can be used effectively for selected cases with mild to moderate malocclusion. REGISTRATION PROSPERO registration number: CRD42021246855.
Collapse
|
46
|
Effectiveness of an anterior mini-screw in achieving incisor intrusion and palatal root torque for anterior retraction with clear aligners. Angle Orthod 2021; 91:794-803. [PMID: 34061964 DOI: 10.2319/120420-982.1] [Citation(s) in RCA: 29] [Impact Index Per Article: 9.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/01/2020] [Accepted: 04/01/2021] [Indexed: 11/23/2022] Open
Abstract
OBJECTIVES To analyze the biomechanical system of anterior retraction with clear aligner therapy (CAT) with and without an anterior mini-screw and elastics. MATERIALS AND METHODS Models including a maxillary dentition (without first premolars), maxilla, periodontal ligaments (PDLs), attachments, and aligners were constructed and imported to finite element software. Three model groups were created: (1) control (CAT alone), (2) labial elastics (CAT with elastics between the anterior mini-screw and buttons on central incisors), and (3) linguoincisal elastics (CAT with elastics between the anterior mini-screw and precision cuts on the lingual sides of the aligner). Elastic forces (0-300 g, in 50 g increments) were applied. RESULTS CAT alone caused lingual tipping and extrusion of the incisors. Labial elastics caused palatal root torquing and intrusion and mesial tipping of the central incisors, while linguoincisal elastics produced palatal root torquing and intrusion of both central and lateral incisors. Second premolars were intruded in all three groups, with less intrusion in the linguoincisal elastics group. For the control group, stress was concentrated on both labial and lingual root surfaces, alveolar ridge, and cervical and apical PDLs. Stress was more concentrated in the labial elastics group and less concentrated in the linguoincisal elastics group. CONCLUSIONS CAT produced lingual tipping and extrusion of incisors during anterior retraction. Anterior mini-screws and elastics can achieve incisor intrusion and palatal root torquing. Linguoincisal elastics are superior to labial elastics with a lower likelihood of buccal open bite. Root resorption and alveolar defects may occur in CAT, more likely for labial elastics and less likely for linguoincisal elastics.
Collapse
|
47
|
External apical root resorption 6 months after initiation of orthodontic treatment: A randomized clinical trial comparing fixed appliances and orthodontic aligners. Korean J Orthod 2021; 51:329-336. [PMID: 34556587 PMCID: PMC8461388 DOI: 10.4041/kjod.2021.51.5.329] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/08/2020] [Revised: 02/10/2021] [Accepted: 03/26/2021] [Indexed: 11/28/2022] Open
Abstract
Objective To compare the magnitude of external apical root resorption (EARR) 6 months after starting orthodontic treatment using orthodontic aligners (OAs) and fixed appliances (FAs). Methods This parallel randomized clinical trial included 40 patients randomized into two groups OA group (n = 20, 160 incisors) and FA group (n = 20, 160 incisors). For evaluation of the tooth length, periapical radiographs and standardized linear measurements of the maxillary and mandibular incisors were acquired before (T0) and 6 months after treatment initiation (T1). EARR was calculated through the difference in length between the two time points (T1–T0). Statistical comparisons were performed by means of using t-tests, chi-squared test and covariance analysis (a = 5%). Results Rounding of the root apex was observed in both groups; the resorption involved 2.88% of the root length, so 97.12% of the tooth length remained intact. Intragroup comparisons between the two time points revealed a significant difference, with (T1–T0) ranging from −0.52 to −0.88 mm in the FA group and from −0.52 to −0.85 mm in the OA group. In the intergroup comparisons, only tooth #21 presented a statistically significant difference (OA −0.52 ± 0.57 mm, FA −0.86 ± 0.60 mm); however, the overall differences between groups were not clinically relevant, ranging from 0.03 to 0.35 mm. Conclusions OA and FA treatment resulted in a similar degree of EARR in the maxillary and mandibular incisors at 6 months after treatment initiation. However, the amount of resorption was small and does not impair tooth longevity.
Collapse
|
48
|
Assessment of preparation time and 1-year Invisalign aligner attachment survival using flowable and packable composites. Angle Orthod 2021; 91:583-589. [PMID: 33848325 DOI: 10.2319/063020-598.1] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/01/2020] [Accepted: 12/01/2020] [Indexed: 11/23/2022] Open
Abstract
OBJECTIVES To compare preparation time and 1-year Invisalign aligner attachment survival between a flowable composite (FC) and a packable composite (PC). MATERIALS AND METHODS Fifty-five participants (13 men and 42 women, mean age ± SD: 24.2 ± 5.9 years) were included in the study. Ipsilateral quadrants (ie, maxillary and mandibular right, or vice versa) of attachments were randomly assigned to the FC group (Filtek Z350XT Flowable Restorative) and the PC group (Filtek Z350XT Universal Restorative) by tossing a coin. The primary outcome was preparation time. The secondary outcome was time to the first damage of an attachment. Preparation times were compared using the paired t-test, and the survival data were analyzed by the Cox proportional hazards model with a shared frailty term, with α = .05. RESULTS The preparation times were significantly shorter with the FC (6.22 ± 0.22 seconds per attachment) than with the PC (32.83 ± 2.16 seconds per attachment; P < .001). The attachment damage rates were 14.79% for the FC and 9.70% for the PC. According to the Cox models, attachment damage was not significantly affected by the attachment material, sex, arch, tooth location, attachment type, presence of overbite, or occurrence of tooth extraction. CONCLUSIONS The use of a FC may save time as compared with the use of a PC. With regard to attachment survival, there was no significant difference between the two composites. None of the covariates of attachment materials (sex, arch, tooth location, attachment type, presence of overbite, oir occurrence of tooth extraction) affected attachment damage.
Collapse
|
49
|
The optimal orthodontic displacement of clear aligner for mild, moderate and severe periodontal conditions: an in vitro study in a periodontally compromised individual using the finite element model. BMC Oral Health 2021; 21:109. [PMID: 33691673 PMCID: PMC7945334 DOI: 10.1186/s12903-021-01474-7] [Citation(s) in RCA: 20] [Impact Index Per Article: 6.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/04/2020] [Accepted: 02/28/2021] [Indexed: 12/02/2022] Open
Abstract
Background Pathologic tooth migration (PTM) is a common complication of mild to severe periodontitis and proper orthodontic treatment is helpful to alleviate periodontal diseases. The goal of this study is to explore an optimal orthodontic displacement of clear aligner using a three-dimensional (3D) finite element model (FEM). Methods The cone beam computed tomography (CBCT) data of a patient received invisible orthodontics without diabetes and other systemic diseases were collected. Based on the new classification scheme for periodontal diseases in 2017 (stage I: mild periodontitis, [M1]; stage II: moderate periodontitis, [M2]; stage III: severe periodontitis, [M3]), 3D-FEMs of mandible were established using MIMICS 10.0 and ABAQUS 6.5 softwares. The 3D stress distribution diagrams and stress value of the teeth (left lower incisor, left lower central incisor, right lower lateral incisor, and right lower central incisor) under three different periodontal conditions (M1, M2, and M3) with axial inclination 90° and 100° were obtained by ABAQUS 6.5. Results The stress of anterior teeth was concentrated in the teeth neck, and became greater when the periodontal condition was worse. The stress value of anterior teeth and the strain at the top of the alveolar crest are greater as the displacement increasing. The stress value of anterior teeth and the strain at the top of the alveolar crest in axial inclination 100° are relatively great compared to those of axial inclination 90°. For patients with excessively inclined anterior teeth (such as 100°), the optimal orthodontic displacement is 0.18 mm. In order to ensure that alveolar ridge crest is not deformed, the displacement is less than 0.18 mm (strain for 0.165 mm), 0.15 mm (strain for 0.167 mm) and 0.10 mm (strain for 0.117 mm) respectively when alveolar bone is normal, resorption 1/3 or 1/3–1/2. Conclusions The optimal orthodontic displacement for patients (M1, M2, and M3) with excessively inclined anterior teeth (axial inclination 100°) is 0.18 mm. To avoid the strain at the top of the alveolar crest, the optimal displacements for M1, M2 and M3 periodontal disease patients are less than 0.18 mm, 0.15 mm and 0.10 mm, respectively.
Collapse
|
50
|
An objective system for appraising clear aligner treatment difficulty: clear aligner treatment complexity assessment tool (CAT-CAT). BMC Oral Health 2020; 20:312. [PMID: 33167950 PMCID: PMC7654177 DOI: 10.1186/s12903-020-01300-6] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/19/2020] [Accepted: 10/28/2020] [Indexed: 02/08/2023] Open
Abstract
BACKGROUND Recent years have witnessed a remarkable evolution of clear aligner technology and clear aligners are becoming more and more versatile in treating orthodontic patients. The aim of this study was to develop an objective evaluation system for assessing clear aligner treatment difficulty. METHODS A total of 120 eligible patients (100 patients for developing and testing the evaluation system and 20 patients for validating this system) were recruited in this retrospective cross-sectional study. Based on clinical data (dental models, radiographs and photographs), complexity levels of cases were evaluated by two experts and regarded as the gold standard. Difficulty scores were determined through an evaluation system encompassing three domains (dental model analysis, radiographic examinations and clinical examinations). The reliability of the evaluation system was examined through analyzing the agreement between complexity levels and difficulty scores. Moreover, multivariable linear regression test was used to examine the independent association of each variable (e.g. overbite and crowding) with the complexity level. RESULTS The results revealed that the assessment of treatment difficulty by this objective evaluation system substantially matched the gold standard (R2 = 0.80). The multivariable regression test revealed that complexity level was significantly associated with difficulty score (p < 0.001), age (p = 0.015), tooth extraction (p < 0.001), treatment stage (p < 0.01) and the number of difficult tooth movement (p = 0.005). This objective evaluation system elaborated in this study was viable and reliable in appraising clear-aligner treatment difficulty in clinical practice. CONCLUSIONS We suggest orthodontists and general practitioners use this objective evaluation system (CAT-CAT) to appraise clear aligner treatment difficulty and to select appropriate clear aligner patients.
Collapse
|