Naturally Crosslinked Biocompatible Carbonaceous Liquid Metal Aqueous Ink Printing Wearable Electronics for Multi-Sensing and Energy Harvesting

Achieving flexible electronics with comfort and durability comparable to traditional textiles is one of the ultimate pursuits of smart wearables. Ink printing is desirable for e-textile development using a simple and inexpensive process. However, fabricating high-performance atop textiles with good dispersity, stability, biocompatibility, and wearability for high-resolution, large-scale manufacturing, and practical applications has remained challenging. Here, water-based multi-walled carbon nanotubes (MWCNTs)-decorated liquid metal (LM) inks are proposed with carbonaceous gallium-indium micro-nanostructure. With the assistance of biopolymers, the sodium alginate-encapsulated LM droplets contain high carboxyl groups which non-covalently crosslink with silk sericin-mediated MWCNTs. E-textile can be prepared subsequently via printing technique and natural waterproof triboelectric coating, enabling good flexibility, hydrophilicity, breathability, wearability, biocompatibility, conductivity, stability, and excellent versatility, without any artificial chemicals. The obtained e-textile can be used in various applications with designable patterns and circuits. Multi-sensing applications of recognizing complex human motions, breathing, phonation, and pressure distribution are demonstrated with repeatable and reliable signals. Self-powered and energy-harvesting capabilities are also presented by driving electronic devices and lighting LEDs. As proof of concept, this work provides new opportunities in a scalable and sustainable way to develop novel wearable electronics and smart clothing for future commercial applications.

High-response room-temperature NO2 gas sensor fabricated with thermally reduced graphene oxide-coated commercial cotton fabric

Electronic textile-based gas sensors with a high response for NO2 gas were fabricated using reduced graphene oxide (rGO)-coated commercial cotton fabric (rGOC). Graphene oxide (GO) was coated on cotton fabric by simply dipping the cotton into a GO solution. To investigate the relationship between the degree of reduction and the sensing response, the GO-coated fabrics were thermally reduced at various temperatures (190, 200, 300, and 400 °C). The change in the amount of oxygen functional groups on the rGOCs was observed by x-ray photoelectron spectroscopy, Raman spectroscopy, and x-ray diffraction patterns. The maximum sensing response of 45.90 % at 10 ppm of NO2 gas at room temperature was exhibited by the rGOC treated at 190 °C, which was the lowest heat-treatment temperature. The high response comes from the greater amount of oxygen functional groups compared to other rGOC samples, and the tubular structure of the cotton.

Wearable E-Textile and CNT Sensor Wireless Measurement System for Real-Time Penile Erection Monitoring

Erection measurements are the most important indicator of male urological disease diagnosis, treatment, and results. Rigiscan has been used widely in studies and diagnoses for nocturnal penile tumescence for evaluating erectile dysfunction by measuring the number and timing of erectile dysfunctions during sleep. However, this device has limitations such as the weight and bulk of the device and has been questioned for its role as a standard for ED Erectile Dysfunction (ED) diagnosis. In this study, we propose a real-time wearable monitoring system that can quantitatively measure the length and circumference of the penis using electronic textiles (E-textile) and carbon nanotube (CNT) sensors. The E-textile sensor is used to measure the length, circumference, and gradient with portability, convenience, and comfort. Sensors were created by coating CNTs on latex for flexibility. The CNT-based latex condom-type sensor in our proposed system shows the length, circumference, and curvature measurements with changes in resistance, and the E-textile performance shows a 1.44% error rate and a cavity radius of 110 to 300. The results of this conceptual study are for supplementary sensor development with a combination of new technologies with alternatives or existing methods for measuring erection function.

Emergence of flexible technology in developing advanced systems for post-stroke rehabilitation: a comprehensive review

OBJECTIVE

Stroke is one of the most common neural disorders, which causes physical disabilities and motor impairments among its survivors. Several technologies have been developed for providing stroke rehabilitation and to assist the survivors in performing their daily life activities. Currently, the use of flexible technology (FT) for stroke rehabilitation systems is on a rise that allows the development of more compact and lightweight wearable systems, which stroke survivors can easily use for long-term activities.

APPROACH

For stroke applications, FT mainly includes the "flexible/stretchable electronics", "e-textile (electronic textile)" and "soft robotics". Thus, a thorough literature review has been performed to report the practical implementation of FT for post-stroke application.

MAIN RESULTS

In this review, the highlights of the advancement of FT in stroke rehabilitation systems are dealt with. Such systems mainly involve the "biosignal acquisition unit", "rehabilitation devices" and "assistive systems". In terms of biosignals acquisition, electroencephalography (EEG) and electromyography (EMG) are comprehensively described. For rehabilitation/assistive systems, the application of functional electrical stimulation (FES) and robotics units (exoskeleton, orthosis, etc.) have been explained.

SIGNIFICANCE

This is the first review article that compiles the different studies regarding flexible technology based post-stroke systems. Furthermore, the technological advantages, limitations, and possible future implications are also discussed to help improve and advance the flexible systems for the betterment of the stroke community.

Fabric based printed-distributed battery for wearable e-textiles: a review

Wearable power supply devices and systems are important necessities for the emerging textile electronic applications. Current energy supply devices usually need more space than the device they power, and are often based on rigid and bulky materials, making them difficult to wear. Fabric-based batteries without any rigid electrical components are therefore ideal candidates to solve the problem of powering these devices. Printing technologies have greater potential in manufacturing lightweight and low-cost batteries with high areal capacity and generating high voltages which are crucial for electronic textile (e-textile) applications. In this review, we present various printing techniques, and battery chemistries applied for smart fabrics, and give a comparison between them in terms of their potential to power the next generation of electronic textiles. Series combinations of many of these printed and distributed battery cells, using electrically conducting threads, have demonstrated their ability to power different electronic devices with a specific voltage and current requirements. Therefore, the present review summarizes the chemistries and material components of several flexible and textile-based batteries, and provides an outlook for the future development of fabric-based printed batteries for wearable and electronic textile applications with enhanced level of DC voltage and current for long periods of time.

A Review of Solar Energy Harvesting Electronic Textiles

An increased use in wearable, mobile, and electronic textile sensing devices has led to a desire to keep these devices continuously powered without the need for frequent recharging or bulky energy storage. To achieve this, many have proposed integrating energy harvesting capabilities into clothing: solar energy harvesting has been one of the most investigated avenues for this due to the abundance of solar energy and maturity of photovoltaic technologies. This review provides a comprehensive, contemporary, and accessible overview of electronic textiles that are capable of harvesting solar energy. The review focusses on the suitability of the textile-based energy harvesting devices for wearable applications. While multiple methods have been employed to integrate solar energy harvesting with textiles, there are only a few examples that have led to devices with textile properties.

Understanding the Washing Damage to Textile ECG Dry Skin Electrodes, Embroidered and Fabric-Based; set up of Equivalent Laboratory Tests

Reliability and washability are major hurdles facing the e-textile industry nowadays. The main fear behind the product's rejection is the inability to ensure its projected life span. The durability of e-textiles is based on an approximate lifetime of both the electronics and textiles integrated into the product. A detailed analysis of the wash process and the possibility of predicting product behavior are key factors for new standards implementation. This manuscript is focused on the washability issues of different types of woven, knitted, and embroidered, textile-based ECG electrodes. These electrodes are used without the addition of any ionic gel to the skin to reduce impedance. They were subjected to up to 50 wash cycles with two different types of wash processes, and changes in surface resistance, as well as the quality of ECG waves, were observed To investigate the wash damages in detail, the proposed mechanical (Martindale and Pilling box) and chemical test methods were investigated. The electrodes which increased resistance after washing showed the same trend in the proposed test methods. Copper-based electrodes suffered the most severe damage and increased resistance, as was also visible in an SEM analysis. These proposed test methods can be used to predict robustness behavior without washing.

Highly Conductive Fiber with Waterproof and Self-Cleaning Properties for Textile Electronics

Major concerns in the development of wearable textile electronics are exposure to moisture and contamination. The exposure can cause electrical breakdown of the device and its interconnections, and thus continuous efforts have been made to fabricate textile electronics which are free from moisture and pollution. Herein, we developed a highly conductive and waterproof fiber with excellent electrical conductivity (0.11 Ω/cm) and mechanical stability for advanced interconnector components in wearable textile electronics. The fabrication process of the highly conductive fiber involves coating of a commercial Kevlar fiber with Ag nanoparticle-poly(styrene- block-butadiene- block-styrene) polymer composites. The fabricated fiber then gets treated with self-assembled monolayer (SAM)-forming reagents, which yields waterproof and self-cleaning properties. To find optimal SAM-forming reagents, four different kinds of reagents involving 1-decane thiol (DT), 1 H,1 H,2 H,2 H-perfluorohexanethiol, 1 H,1 H,2 H,2 H-perfluorodecyltrichlorosilane, 1 H,1 H,2 H,2 H-perfluodecanethiol (PFDT) were compared in terms of their thiol group and carbon chain lengths. Among the SAM-forming reagents, the PFDT-treated conductive fiber showed superior waterproof and self-cleaning property, as well as great sustainability in the water with varying pH because of nanoscale roughness and low surface energy. In addition, the functionality of the conductive fiber was tested under mechanical compression via repeated washing and folding processes. The developed conductive fiber with waterproof and self-cleaning property has promising applications in the interconnector operated under water and textile electronics.